Anyone tried Cm7 new release on arc ??
Didnt workd for me
Sent from my LT15i using XDA App
Running it...!!! Nice release...!!! Works fine...!!! USB tethering is a problem...!!! And does not support devnagri fonts...!!! Else it's great...!!!
Sent from my LT15i using XDA Premium App
THX!
Thank you for this thread!
First of all, I want to say thank you to FreeXperia team and Cyanogenmod!
This release is amazing! Yesterday, I have unlocked the bootloader and install CM7 to my Arc. Followed the guide step by step. And EVERY things are working perfectly. Read about some post in development section about "bugs". I would like to say everyone -who hasn't got gsm signal, vibration, etc- FOLLOW THE GUIDE!
This is the perfect way, I think:
1. Install 4.0.A.2.368 with flashtool(this is MUST!!!)
2. copy the update and gapps zip to sdcard
3. enter fastboot mode on phone(indicated by blue led)
4. open CMD(with administrator permission)
5. Flash the cm kernel( fastboot flash boot boot.img)
6. enter cwm recovery(press several times the volume down key during boot)
7. choose apply update from sdcard and select rom
8. choose apply update from sdcard and select GAPPS
9. wipe device
10. reboot
Maybe it will help for beginners like me.
Thank you..if I want to go back to se stock rom what should I do?
Can I also do a nandroid backup of my se rom and restore it?How?
What about the warranty if I unlock and ther relock the booloader?
isn't there a way to make it work on 4.0.1 fw??
Will it work only on stock 4.0.A2 or 4.0.1 also supported
Sent from my LT15i using XDA App
Where will i get CM7 krnel
Sent from my LT15i using XDA App
nexus2515 said:
Where will i get CM7 krnel
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
In CM7 Thread in Development Section??
I tried this one too, ended up with a broken Arc
Now my phone has the 0% battery issue, it's unusable.
Ill have to look for another phone I guess...
I followed the steps exactly and all went fine.
I installed all my apps last evening and no battery issues whatsoever.
But then I plugged it in to recharge it, and this morning it went nuts and gave the 0% battery problem.
No idea what caused it, my guess is it was somehow triggered by my charger.
Did you try to take out the battery for a while?
How does the cam work on CM7?
As good as with SE's firmware?
Sent from my LT15i using XDA Premium App
Flo95 said:
Did you try to take out the battery for a while?
How does the cam work on CM7?
As good as with SE's firmware?
Sent from my LT15i using XDA Premium App
Click to expand...
Click to collapse
Worst cam UI ever used...always defocuses the object and UI is complex too
Sent from my MT15i using XDA App
nexus2515 said:
Worst cam UI ever used...always defocuses the object and UI is complex too
Sent from my MT15i using XDA App
Click to expand...
Click to collapse
I have to disagree on that one, I like the UI and it is taking pictures just fine.
The only thing is its focus, it will only focus when you press the button not in normal view as what the stock camera app does.
And you can always use a market app like vignette for it, but its all personal of course
voice search and theme chooser not working
Ok anyone else have no working voice search and theme chooser I'm on cm7.1.0. Update not 7.1.0.1.
Related
USE AT YOUR OWN RISK, I AM NOT RESPONSIBLE IF YOU DO SOMETHING TO YOUR PHONE.
GINGERBREAD MOTOBLUR
Modded Defy leaked 2.3.4 gingerbread motoblur rom
I AM NOT RESPONSIBLE FOR YOUR PHONE IF YOU USE THIS, IT WILL BE AT YOUR OWN RISK
All working except for stock camera and camcorder. You must use included appshot for photos and download video illusion from market if you want to record videos
I REPEAT, STOCK CAMERA AND CAMCORDER NOT WORKING.
Made some small Build prop tweaks and partially fixed camera/camcorder
INSTRUCTIONS FOR FIRST INSTALL
DO NOT LEAVE RECOVERY MENU UNTIL YOU ARE COMPLETELY DONE WITH INSTALL
download and place on sdcard/clockwork/backup folder
reboot into recovery menu
format data in recovery
wipe Dalvik in advanced menu of recovery
wipe Cache in recovery
choose restore zip and click to install ROM
reboot and give it some time for first boot
signal problems then use signal wifi download and install in recovery
IF ANY PROBLEMS BOOTING THEN GO BACK TO RECOVERY AND WIPE DATA, CACHE, AND DALVICK THEN REBOOT
INSTRUCTIONS FOR UPDATE INSTALL
DO NOT LEAVE RECOVERY MENU UNTIL YOU ARE COMPLETELY DONE WITH INSTALL
download and place on sdcard
reboot into recovery menu
wipe Dalvik in advanced menu of recovery
wipe Cache in recovery
choose update zip and install rdannarV5
reboot and give it some time for first boot to build cache
signal problems... then use signal wifi download and install in recovery
IF ANY PROBLEMS BOOTING THEN GO BACK TO RECOVERY AND WIPE DATA, CACHE, AND DALVICK THEN REBOOT
I use 2nd init for defy in the market.
Thanks to Walter and maker of dualdefy rom, jorognv without him figuring out porting would be much harder, bandroidx and his apps, and all developers of Bravo and Defy Roms that I may have spliced or used files for reference.
Download
Leaked gingerbread motoblur rom 2.3.4
http://hotfile.com/dl/127894666/ab0eb90/gingerblur.zip.html
wifi and signal fix
SIGNAL FIX
install Walter's apps and framework (not rom)
THIS IS AN UPDATE NOT A ROM
update_september_6th
put wallpapers in any folder on sdcard and use gallery when setting wallpapers (this is bravo wallpapers)
http://hotfile.com/dl/126359321/c8955b2/wallpapers.rar.html
Edit. Got everything but camera working overclock available in settings menu... took a few pieces of all the gingerbread roms and put them into one... gonna test for a few days and get out bugs...
Sent from my MB525 using XDA App
can you get a port of the leaked defy gingerbread?
marquae11 said:
can you get a port of the leaked defy gingerbread?
Click to expand...
Click to collapse
That's what this rom is
Cheers
Sent from my MB525 using XDA App
the camera is partially working? what do you mean?
marquae11 said:
the camera is partially working? what do you mean?
Click to expand...
Click to collapse
The preview screen works and it acts likes it takes a pic but it saves a blank image...
Sent from my MB520 using XDA App
Got dubug working so 3rd party app app will take pic and videos
Sent from my MB520 using XDA App
Does that mean we might get a camera port for miui or maybe cm7?
Sent from my MB525 using XDA App
Sounds good. GB for Bravo. Could you maybe release a update.zip with modificated files. A new MS2Ginger port is planed based on latest Milestone 2 GB. (4.5.3-77)
MS2GingerRC1 has better Language support. (yesterday released)
Plan on using a lot of fixes that your Rom has. Had to use a different base rom with better matching init and kernel files.
@ Walter but it es your rom and pm that got me to work with Ginger blur
As far as miui and cm7... we will see if I have enough time. I kind of like Ginger blur better
Sent from my MB520 using XDA App
So when are you uploading all these files?
They are.to big.for.phone upload so have to find time to go to hotspots .
marquae11 said:
So when are you uploading all these files?
Click to expand...
Click to collapse
Sent from my MB520 using XDA App
ok I look forward to using your roms
http://hotfile.com/dl/127894666/ab0eb90/gingerblur.zip.html
USE AT YOUR OWN RISK, I AM NOT RESPONSIBLE IF YOU DO SOMETHING TO YOUR PHONE.
unzip and put folder in clockwork mod backup folder then restore in recovery
use action shot for pictures (installed0)
use video illusion from market for videos
contacts has some errors so if you need to edit them then long press and pick contact editor that I added
added filemanger from atrix
do not use recovery for overclock, use advanced menu in settings instead.
thanks to defy dualrom developer and walter from defy.
rdannar, is it possible to move the camera from Msginger in CM7?
sorry for my English
Not sure... will see if i can find time to check it out
Right know i am working on installing blur roms with update zip.. so i can port my favorite rom....
Superaosp
Visual_Serg said:
rdannar, is it possible to move the camera from Msginger in CM7?
sorry for my English
Click to expand...
Click to collapse
Sent from my MB520 using XDA App
Got half of a rom install done... it bootloops.. but it makes it through recovery menu so i don't have to sbf afterwards... sbf takes a lot longer than restore my system.
Sent from my MB520 using XDA App
Rdannar, is the nandroid safe or should I wait for an update.zip
Try stock camera.apk from greenbreadmod in defy section. link to greenbread can find on first page of MS2Ginger thread.
Could you give more information about the camera problem.
Thanks. Camera didn't make a difference.. tried several of them. There is a error in libsojordan.sh.
walter79 said:
Try stock camera.apk from greenbreadmod in defy section. link to greenbread can find on first page of MS2Ginger thread.
Could you give more information about the camera problem.
Click to expand...
Click to collapse
Sent from my MB520 using XDA App
Someone please help me I have downloaded this rom and flashed the radio and also the mod for the phone just rebooting. For some reason the phone does keep rebooting and then when I go into the camera it says that the camera has failed. Then sometimes after the phone reboots I get a message saying that the process system has unexpectingly stopped working, and either gives me a choice to click wait or ok and either one I click does not work for the phone. I also flashed the theme called [THEME] Updated! 6/16~Touch0Color~ DS Evolution3 V3 + Universal flash. With the theme on or off the phone still reboots and has the same problems. I am wondering what can I do to make the phone stop restarting and make my camera work. I am also using titanium back up in order to restore my apps
atlprettygirl2145 said:
Someone please help me I have downloaded this rom and flashed the radio and also the mod for the phone just rebooting. For some reason the phone does keep rebooting and then when I go into the camera it says that the camera has failed. Then sometimes after the phone reboots I get a message saying that the process system has unexpectingly stopped working, and either gives me a choice to click wait or ok and either one I click does not work for the phone. I also flashed the theme called [THEME] Updated! 6/16~Touch0Color~ DS Evolution3 V3 + Universal flash. With the theme on or off the phone still reboots and has the same problems. I am wondering what can I do to make the phone stop restarting and make my camera work. I am also using titanium back up in order to restore my apps
Click to expand...
Click to collapse
Flash darksidewipe.Cache
Do I need to reflash the rom before I do this or can I do it while the rom is on the phone?
atlprettygirl2145 said:
Do I need to reflash the rom before I do this or can I do it while the rom is on the phone?
Click to expand...
Click to collapse
While it is on the phone.
alphadog32 said:
While it is on the phone.
Click to expand...
Click to collapse
Thank you I will try it and let you know how it works out
Wiping cache won't fix it. Its the problem with rom. Update the one released today. Should be fine
Sent from my SGH-T989 using xda premium
shankar10 said:
Wiping cache won't fix it. Its the problem with rom. Update the one released today. Should be fine
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Will this help the problem with the restarting as well.. I am using titanium back up to put all my apps back on the phone. will that be a problem
atlprettygirl2145 said:
Will this help the problem with the restarting as well.. I am using titanium back up to put all my apps back on the phone. will that be a problem
Click to expand...
Click to collapse
Okay well I flashed the rom and now it keeps saying media scanning
After flashing the new rom update that was put out there today now I am seeing media scanner running and the camera will still not come up
atlprettygirl2145 said:
After flashing the new rom update that was put out there today now I am seeing media scanner running and the camera will still not come up
Click to expand...
Click to collapse
My usb storage keeps saying calculating on audio. I dont no if this has something to do with why the media scanning running is still running after 20 something mins
you need to wait sometime to finish the scan. I had problem with the rom that I'm not receiving any text messages.
went back to stock and rooted and removed all the bloats. it's perfect now, you might want to give it a try.
How did you remove the bloat. I really don't have any idea on how to do that
Sent from my SGH-T989 using xda premium
I was also having the text problem can you please tell me step by step on how to remove the bloat
Sent from my SGH-T989 using xda premium
And can you also tell me what you erased
Sent from my SGH-T989 using xda premium
You remove the bloatware with titanium.
You freeze or uninstall annoying Samsung or tmobile stuff
It's like the 3rd menu option
You get a list of the stuff on your phone
You select the suspect stuff and freeze it
Or un install if you are sure you don't want it
Sent from my SGH-T989 using xda premium
Use tdjs att based ROM if the TMobile one is giving you trouble
Sent from my SGH-T989 using xda premium
Do I have to be running the rom that I want to use to remove the bloatware I had to go back to another rom so that my phone wouldn't keep rebooting
Sent from my SGH-T989 using xda premium
Here install this since you don't know how to remove the bloat. Just follow the instructions
http://forum.xda-developers.com/showthread.php?t=1645985
Having an issue when my phone is plugged in and charging.. I keep getting "battery unplugged" message which ruins any hdmi content im watching. Im assuming its an error from the battery notification removal. Help plz thx.
I want to use tge darkside rom that is why I asked
Sent from my SGH-T989 using xda premium
Well, the thing is, I do a factory reset, wipe cache, Dalvik, System, Battery stats, and flashed CM9. Everything perfect, it starts the (blue strange CM9 monster) logo and it loads.
But, at locker screen it show a "launcher" error (I don't remember the name of the launcher) and everything is EXTREMELY SLOW, takes like 10 second to unlock de phone and is like slow motion.
Any idea? Maybe the kernel?
Sent from my LT15i using xda premium
the kernel you should be using is the one given to you in the CM9.zip which is FXP 130 or 131 (what ever one you get) if you are using a different kernel you will have the slowest rom
I flashed via FT the FXP kernel img included in the cm9.zip, now, when I'm flashing CM9 in CWM it says “Status 7 error” and some build.prop text showing my device name. And of course, the installation is aborted.
What now?
Sent from my LT15i using xda premium
Try flash kernel using fastboot man. Not sure if it is caused by the flashtool. But I tried CM9 with following steps, it works well:
1. Flash the kernel using fastboot.
2. Boot into CWM and flash the ROM
3. Cheers!:highfive:
I did these for many times never got any problem.
There is FXP 132 already try use it. Im using it on my CM9
Well, 132 via fastboot worked perfect. Thank you guys.
Sent from my LT15i using xda premium
Cm Roms
Never Lagged For Me.
Sent from my Xperia Arc S using Tapatalk 2
The leatest version [ROM-PrimoU|GSM] [17-August] myONEv RC4.0 FX is the best one for ONE V
and please for those who have problems like
Quote:
Originally Posted by #DIO View Post
1. the new icons dont work for me - the app crashes at startup
2. when i plug headphones in - the music starts automatically
3. when i recieve a call and the phone is locked its quitly impossible to answer the call (lag) even if i hurry - so got to call back everytime
4. sometimes camera starts by itself
1.flash leatest Kiss kernel
2.flash ROM
3.flash again leatest Kiss kernel
4.make NOT data restore!!!
5.best to use min:768 - max:1497 - SmartAssV2 -noop
Works really really fast and super stable!!!
Thank you very much ckpv5!!!
:laugh:
CM9 IMO, has no sense. Sense = rage.
tichyline said:
3.flash again leatest Kiss kernel
Click to expand...
Click to collapse
Thats not needed
Sent from my One V using xda app-developers app
Hey there, when I install Kiss kernel wifi doesn't work! So I had to flash the kernel that was inside the zip file, help
Sent from my HTC One V using xda app-developers app
Which kernel is the best kernel for this rom?
Sent from my HTC One V using xda app-developers app
KISS kernel.
Make sure you choose the correct KISS kernel for Sense ROM.
So which kiss kernel is the correct kernel? I even flashed titanium kernel build 5, but wifi still doesn't work, wifi works only under the boot.img that is placed in zip folder!
Sent from my HTC One V using xda app-developers app
I'm on this one : http://forum.xda-developers.com/showpost.php?p=30185717&postcount=163
Use command prompt to flash it in fastboot mode:
fastboot flash boot boot-TK-USB-OC-VDD-201208042344.img
fastboot erase cache
I flashed the kernel, and erased the Cache, yet the kernel is so laggy and I still have wifi problem,
Another question, in this rom the app "adobe reader" has been moved to user apps, I tried to move it to system app using rootexplorer, but after that it force closes, how can I move it there?
Sent from my HTC One V using xda app-developers app
mohammad0089 said:
Which kernel is the best kernel for this rom?
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
maybe u flashed the wrong kiss kernel?
there are 3 different kiss kernels cm9/cm10/stock based and all other roms
for this rom ull need the last one
I downloaded the last one, yet still the same problem exist,
I flashed this kernel before installing this rom, but when I saw the problem, I flashed the kernel that it was inside the zip, if I reinstall the rom again with its kernel, then install this, would it solve or not?
Sent from my HTC One V using xda app-developers app
mohammad0089 said:
Another question, in this rom the app "adobe reader" has been moved to user apps, I tried to move it to system app using rootexplorer, but after that it force closes, how can I move it there?
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
You cannot simply move the adobe reader to system/app. Make a copy of it, then uninstall it. Then use the copy that you have to put it in system/app and put the right permission to it. But why do you need it system/app ?
Aha, thanks so much, just wanted to have it in system app, like official roms , then it wont be deleted again
Sent from my HTC One V using xda app-developers app
guys, finally i could install adobe reader to system! i extracted adobereaderlib.so from apk file, then i replaced it with the original file in the system/lib, then moved the apk to system/app and changed the permissons, then rebooted!
tichyline said:
The leatest version [ROM-PrimoU|GSM] [17-August] myONEv RC4.0 FX is the best one for ONE V
and please for those who have problems like
Quote:
Originally Posted by #DIO View Post
1. the new icons dont work for me - the app crashes at startup
2. when i plug headphones in - the music starts automatically
3. when i recieve a call and the phone is locked its quitly impossible to answer the call (lag) even if i hurry - so got to call back everytime
4. sometimes camera starts by itself
1.flash leatest Kiss kernel
2.flash ROM
3.flash again leatest Kiss kernel
4.make NOT data restore!!!
5.best to use min:768 - max:1497 - SmartAssV2 -noop
Works really really fast and super stable!!!
Thank you very much ckpv5!!!
:laugh:
Click to expand...
Click to collapse
Before I installed a SuPriMo ROM , but it was error in the process of installing. Then i backupped a Stock ROM. Since i couldn't make call or message when i set GSM/WCDMA auto. I try almost ROMs but it does't work.:crying: I don't know why.
taigameloft said:
Before I installed a SuPriMo ROM , but it was error in the process of installing. Then i backupped a Stock ROM. Since i couldn't make call or message when i set GSM/WCDMA auto. I try almost ROMs but it does't work.:crying: I don't know why.
Click to expand...
Click to collapse
You need to make a full format/wipe your device system/data/cache. Then install a ROM again and also flash the boot.img that meant for the ROM.
If you have a right RUU, you can restore your device with a RUU which will format/wipe the whole system/data/cache.
Also had problems and crashes before like many people and after i change recovery and put leatest Kiss kernel the phone is reborn with this ROM. But I dont like to use data restore because expirience from before...
Step by step:
1. flash with all in tool TWRP v.2.2.0 recovery
2. in TWRP wipe all system, cache's, data
3. Boot into bootloader and flash leatest Kiss kernel for stock ROM and all other NOT CM based ROMS
- fastboot flash boot boot.img
- fastboot reboot-bootloader
- fastboot erase cache
4. Boot into recovery and flash with full wipe myONEv_RC4.0.fx.zip
5. CPU use min:768 - max:1497 - SmartAssV2 -noop
6. Install all your aps and sync your stuff...
I use the latest myONEv_RC4.0.fx all the time without any slightest problem, super fast and stable, battery perfect!
Lets rock with new base... :good:
Thx ckpv5, maxwen and all people working on TWRP
Hey dear developers, I'm using this rom currently, I have a question, in this rom the soft keys function has been changed (to go to option for a app we need to hold the middle soft key (home key) , for me the previous one is easier, so how can I change it? Thanks anyway
Sent from my HTC One V using xda app-developers app
mohammad0089 said:
Hey dear developers, I'm using this rom currently, I have a question, in this rom the soft keys function has been changed (to go to option for a app we need to hold the middle soft key (home key) , for me the previous one is easier, so how can I change it? Thanks anyway
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
You have more than 10 posts, you can post anything about myONEv ROM in it's development thread.
Anyway, see this : http://forum.xda-developers.com/showpost.php?p=28810419&postcount=446
Hope there is soon new RCxx with full sense :laugh:
Thx all developers and modders...
I have been looking all over and my eyes are about ready to have a critical meltdown.
I have a T-Mo T-989 (Hercules) and have been looking for a JB ROM all night and found some shady threads or ROMs that don't work. I dunno, maybe I've installed something wrong, little help here?
Generally the ones that will install get hung up during the initial boot, wtf? Have run across some that wouldn't even install and would abort.
I should say I am using CWM 5.0.2.6... I think, its been so long since I have done anything to this phone so I forget but I know its ither Odin or CWM (or are they both one in the same? x.x ) I've been using Darkside Evolution ICS ROM all this time and would be nice to move up to JB if there is a stable one out there
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
iburnhearts said:
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hmm, well I got goo manager and its now stuck on the TWRP's boot screen and just reboots after so long of sitting there :/ and its already deleted the rom, so I guess I have to go through the CWM rooting proceeders again?
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
i would say, to use twrp and download the latest cm10 Here.
i recommend twrp for stable flashing cause there's bugs in latest cwm...
PorscheHusky said:
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
Click to expand...
Click to collapse
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
John imilitym
bzlik88 said:
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
CWR 5027 isn't bad at all it's just that using darkside scripts with certain new recoveries has caused some people boot loops and also with the newer recoveries they aren't required since the built in wipe options work just fine.Personally I use the recovery here http://forum.xda-developers.com/showthread.php?t=1844637
and have had zero issues with it plus it has the darkside scripts built in
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
arthurgreeeen said:
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
+1. You can't go wrong with that Rom! I been running it for over a week now with zero complaints
Sent from my SGH-T989 using xda app-developers app
With the v3 sbean I couldn't get my home button to work when I ask tmo twice he didn't respond to my question. I'm looking at slimbean next we'll see how that goes
Sent from my SGH-T989 using xda app-developers app
I would recommend trying either AOKP OFFICIAL Build 5 (not sure if by time you read this if theres a newer one) or a CM10 Nightly. I've tried tons of different JB roms from 4.1 to 4.1.2 and those work good. Decent battery life without changing too many settings (I'm afraid to change too many things because I've hard bricked my phone before but barely got it replaced under the 20 day full exchange warranty). No random reboots or force closes for me so far. Highly recommend trying them out, very simple to flash.
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
duckied said:
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
And I haven't had anything go majorly wrong with cm10 since the nightlies went official. I'm on the 10/24 nightly right now.
Sent from my A100 using Tapatalk HD
Nice nice... I wanna test out CMX maybe I'll make a nand backup and check it out
Sent from my SGH-T989 using xda app-developers app
LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Actually... I have CMW6 now the touch one. Does that have something to do with it? The main issue I have with SBean and CM9's JB is eveyrone complains that they can't hear me, that I sound like a robot and the call is badly broken up or that I'm not speaking up like my mic isn't picking up on my voice very well.
Is this a ROM error or a kernel error? rather annoying frankly @[email protected]
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
duckied said:
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
This is a sure fix then? This would make me the happiest Porsche Husky on Earth if I could go back to Sbean
The customization features of it are to die for
Ooooo, wait a tic... I feel like such n00b now...
I kept downloading V1 thinking it was the newest one xD I think the V6 at the way bottom is the newest one. I'll try that for a few days then report back.
Edit: QUESTION - my screen is flickering (just installed SBEAN V6)... is that a bad install or did I have to fix permissions?
That pretty common in most JB rom but it usually goes away after few mins for me. You can go to settings and then developer options then disable hw overlay but you would need to do it on every boot because it won't stick after a reboot.
Btw you should check out official aokp-milestone-1 it not on here but Google aokp and download the one for our phone. Its pretty sick and stable.
Sent from my SGH-T989 using xda premium