Hi guys, im using the miui rom and i can overlclock to 1113 i would like to overclock to 1.3 or more than 1.2 and get about 45 in linpack.please tell me which rom is the best and overclocking program. if you may you could write me how to flash it. Thank You
salata1500 said:
Hi guys, im using the miui rom and i can overlclock to 1113 i would like to overclock to 1.3 or more than 1.2 and get about 45 in linpack.please tell me which rom is the best and overclocking program. if you may you could write me how to flash it. Thank You
Click to expand...
Click to collapse
To tell you the truth, no overclocking Suggestions, be, and the CPU
I know that Playpetepp uses my kernel at 1.267 GHz
Edit.. Damn just saw the original date
Related
Hi guys.. Just got my Desire last week and rooted last few days ago..
I tried to find any thread bout how to overclock but I cant find any of it..
Sorry for my english and my noobishness..
Need more Detail or manual bout this.. Thanks guys
squidkhaw said:
Hi guys.. Just got my Desire last week and rooted last few days ago..
I tried to find any thread bout how to overclock but I cant find any of it..
Sorry for my english and my noobishness..
Need more Detail or manual bout this.. Thanks guys
Click to expand...
Click to collapse
you need to make sure your using an oc kernel or you cant overclock ..... if you are just buy setcpu from the market .....
So I just need the OC Kernel? how bout the OpenDesire?
squidkhaw said:
So I just need the OC Kernel? how bout the OpenDesire?
Click to expand...
Click to collapse
open desire has oc kernel, richardtrip just released an oc kernel for sence roms too here http://forum.xda-developers.com/showthread.php?t=801435, like i said just use setcpu,
Ok..So what I need is just a ROM manager to flash it right? then backup it before I flash it?
well it depends on which ROM you are running ,
>if you are running some non-sense roms like Open desire or Defrost ,
then you can use setcpu directly ,because it comes with overclocked kernel
>if are using sense ROMs like leedroid, Nextsense etc,
you need a overclocked kernel you can download it from here:
http://forum.xda-developers.com/showthread.php?t=801915
flash the zip file in recovery mode , then use setcpu
i recommend you to reboot after overclocking ....
If I use OpenDesire rom how much Mhz can it increase after overclock?
That depends on the "quality" of your cpu
(the cpu is guaranteed to work at stock speed, anything higher is a guess, and may be cause of instability)
In case of a "bad" cpu you might be able to get it to ± 1050 Mhz
I've seen "lucky" people mentioning ± 118*Mhz (don't remember the actual number )
And don't forget it will put a extra drain on you battery.
This is something you could have found yourself by searching / reading the Developers sub-forum
karloe said:
That depends on the "quality" of your cpu
(the cpu is guaranteed to work at stock speed, anything higher is a guess, and may be cause of instability)
In case of a "bad" cpu you might be able to get it to ± 1050 Mhz
I've seen "lucky" people mentioning ± 118*Mhz (don't remember the actual number )
And don't forget it will put a extra drain on you battery.
This is something you could have found yourself by searching / reading the Developers sub-forum
Click to expand...
Click to collapse
my phone works well at 1118mhz, im just waiting for a kernel that will let me oc it abit more
i tested my desire with opendesire-4.33 you can safely overclock your cpu to 1190mhz using setcpu ,,and remember it drains your battery like hell,, set your scaling to on-demand mode.
I'm runing stock Sense ROM and would like to flash Kernel that will allow me to overclock to 1.7 or even more.
EDIT: If possible by insmod (oc module + cpu freq table), that would be even better.
+1
and it should not mess up with the Wi-Fi MAC address & Bluetooth
I tried some 1.5GHz/overclock kernel, either of them changed my Wi-Fi MAC or messed up Bluetooth pairings. Now using overclocking module(GodSpeed)
schriss said:
I'm runing stock Sense ROM and would like to flash Kernel that will allow me to overclock to 1.7 or even more.
EDIT: If possible by insmod (oc module + cpu freq table), that would be even better.
Click to expand...
Click to collapse
Oh wow that's crazy. Would it be safe to clock it at that speed?
I'd say 1.4GHz is relatively safe, running it for weeks.
1.9-2.0 definitely insane, but I'd like to try 1.7 and maybe higher to see how far it goes.
So would like to know which kernel from G2 forum would work with Sense ROM, or maybe someone could extract the needed files so we could install via insmod.
I think we only need two files: one for OC and the other with voltage table.
Sent from Desire Z
schriss said:
I'd say 1.4GHz is relatively safe, running it for weeks.
1.9-2.0 definitely insane, but I'd like to try 1.7 and maybe higher to see how far it goes.
So would like to know which kernel from G2 forum would work with Sense ROM, or maybe someone could extract the needed files so we could install via insmod.
I think we only need two files: one for OC and the other with voltage table.
Sent from Desire Z
Click to expand...
Click to collapse
The 1.8GHz kernel on G2 forum works on Desire Z, except Bluetooth.
Just tested on my Hong Kong Desire Z, until they fix the BT issue, I will stay with 1.4GHz
Maybe there is a way to unpack that kernel and only take the overclock part of it, that should keep all other stuff working.
Sent from Desire Z
Hi there, I'm running Oxygen 2.1.6. on my Desire, and I'm trying to squeeze a little bit more out of my battery, and owning a Galaxy S as well, with the Galaxy, there are Kernels that Support OC/UV.
I'm wondering if there are any good kernels for Oxygen 2.1.6 (Gingerbread) that support OC/UV Thanks.
snq- 0.6 kernel supports oc/uv I think
Sent from my HTC Desire using XDA App
I saw those, but I'm unfamiliar with how to flash these files. I'm used to having a zip file to either flash in CWM, or in Odin ( which the desire doesn't use)
The files in SNQ's are Z-images and .ko's...
I'm more familiar with the more n00b way of flashing kernels :X terribly sorry.
elliottg61 said:
snq- 0.6 kernel supports oc/uv I think
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
That is a Sense kernel. It is sometimes better not to write anything than to post an erroneous info. And furthermore, uv doesn't work properly with it.
hamsteyr said:
I'm more familiar with the more n00b way of flashing kernels :X terribly sorry.
Click to expand...
Click to collapse
What more do you want from Oxygen? Thalamus kernel supports both uvoc and is probably most efficient kernel as is.
Flash newest oxygen with newest kernel. And I am pretty sure, you will be very happy it. I tested many rom/kernel combinations with software like setcpu und low-voltage-scripts. With oxygen I only reduced maximal cpu frequeny to 768 mhz and min 245 mhz with the included cpu controller and do not get a worse battery life with other roms.
Nice, I'll give it a test. Thanks
Hello i want to overclock my arc s. Can anyone recommend me good kernel for the overclock procedure, and can anyone give me tutorial
Depends on your rom
KoKoOo said:
Hello i want to overclock my arc s. Can anyone recommend me good kernel for the overclock procedure, and can anyone give me tutorial
Click to expand...
Click to collapse
Depends on the rom you use, because JB (ported) roms use a specific kernel, ICS an other one, GB an other.
So once you flash the right kernel(every custom kernel usually have OC, but u can read in the thread to be sure) , you can install No frills Cpu from market and set the cpu as you prefer. its really easy
Lupus and then setcpu or no frills cpu control
SETcpu or CPU master on android market should do the job
Most of the custom kernels have overclocking feature. But it can damage your hardware.You can use setcpu or no frills CPU to overclock your phone.
any overlocking can damage your HW use at own risk!
aaaand what profile is best for normal use ?
Drupry said:
any overlocking can damage your HW use at own risk!
aaaand what profile is best for normal use ?
Click to expand...
Click to collapse
performance with noop :victory:
Hello,
I recently just got my hands on a HTC One M8, it's rooted, unlocked and S-OFF however CPU is limited to 2.2Ghz and I wish to attempt to achieve 2.5Ghz.
Is there some way I can increase it so it lets me clock this high without changing my ROM since stock is absolutely fine for me. I noticed CheckM8 but the instructions on their github looked a bit too much just for 0.3Ghz increase.
Any easier way? I thought it wouldn't lock since my old Desire HD was a 1Ghz CPU but maximum was 2Ghz so thought this would have some leeway.
Thanks,
Chris
Anyone? I tried flashing CheckM8 latest 2.5 OC kernel but it just boots/reboots to boot loader and I have to restore a nandroid. :/
Flash elementalx kernel.You can overclock your device to 2.8 ghz.But I don't recommend it.This device is fast like hell!
Jyotirdeb said:
Flash elementalx kernel.You can overclock your device to 2.8 ghz.But I don't recommend it.This device is fast like hell!
Click to expand...
Click to collapse
That did the job, cheers.
Sent from my HTC One_M8 using XDA Free mobile app