[Q] nothing goes more - Touch Pro2, Tilt 2 Windows Mobile General

I hope somebody can help me.
My problem is:
I have the Vario V and wanted to flash.
Then after flah i get only a loop of the Bootscreen. Because I could not synchronise the mobile phone any more with the Pc, I have tried out another file with ending nbh.(i´ve copied it direct to microsd card).
Now it shows only the Bootloader with the original SPL and I cant flash other roms because they dont loading.
What can I do now?

did you hard spl first?
did you read the instructions on first time flashing for noobs?
take the battery out, put it back in
while pushing the reset button with your stylus, power on the phone, then reflash a stock rom, goo luck

Thanks for reply.
yes i have read it.
i have done whta you say and i get always the bootloader with a error.a

Related

Please help!!

i just loaded a new rom onto my diamond. after installation the phone turns on and displays touch diamond then sits there for about 20 seconds then reboots. its keeps doing it. what can i do?!! ive tried loading another rom but it seems to keep doing it.
When you put you phone into bootmode, does it still restart then?
And have you tried a hard-reset?
it did stay in boot mode, but once i loaded a new rom it did the same thing. i had to load a couple roms before it stuck and started working. thanks for your help.
bigk05 said:
i just loaded a new rom onto my diamond. after installation the phone turns on and displays touch diamond then sits there for about 20 seconds then reboots. its keeps doing it. what can i do?!! ive tried loading another rom but it seems to keep doing it.
Click to expand...
Click to collapse
Maybe this link will help to solve the problem: http://forum.xda-developers.com/showpost.php?p=3433851&postcount=22
Option 2:
If the link above method doesn't work for you, then just simply but your device into bootloader and flash a stock ROM then go back to a cooked ROM and everything she be ok.
Go Here to Find Stock Roms It doesn't matter which one you chose as the goal here is to remove the bloated ROM which happens from too many flashes.
hi, i know this post is a little old but MY DIAMOND IS DOING THE SAME EXACT THING!
i just started leaerning how to do all this, and the only HardSPL that worked on my phone was 1.24.
i updated to that spl, then i upgraded the radio but when i did the rom flashing event i am left with a messed up phone, resulting in only turning on and off, not getting past the touch diamond screen.
PLEASE HELP ME.
Guide to completely restore your messed up device
This little guide is made for newbies who are stuck after flashing images in a wrong way or flashing wrong things.
Note: This is only for GSM Touch Diamond!
This Guide does not include the MTTY Procedure!!
Q. What does this mean?
A. Well, if you are still facing some problems after following this guide, it's time to use MTTY.
Q. what is MTTY?
A. It's a flashing procedure before flashing a ROM, it actually formats your phone (you internal storage will not be lost) and then you are able to flash a ROM.
Q. When do I have to use MTTY?
A. You have to use it before every ROM flash. Before you proceed with step 14, you must read this! It's the only step you need to do it, except for the latest cutsom ROM flash.
Perform a hard-reset (Hold Center button + reset)
Go into bootloader mode by holding volume down and pressing the red reset button
A red-green-blue-white screen will appear. In the white part of the screen, there should be the word 'Serial'
Connect your phone to the computer.
If the word 'Serial' changes into 'USB', you succesfully connected your phone
Go to this link and download 'Unsigned-Hard-SPL-Diamond-OliNex.zip'
Extract it to an empty folder.
Run RomUpdateUtility.exe, make sure your phone is still connected
Follow the steps, check device for prompts after PC shows loading bar. it should go to black screen now.
SPL flashes, device automatically reboots, job done.
to confirm you got it installed, go into bootloader mode and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Now you have re-flashed Hard-SPL, it's time to flash a stock ROM.
Make sure your phone is connected again
Download a stock rom (ie from here) and run the executable.
Follow the instructions, and be patient.
You're done now. You are now able to flash a custom ROM of your choice.
If you can't get your device to work, not my problem! If this didn't help your device is bricked. You'll have to return it to HTC.
And of course I am not responsible for any trouble you get with this guide.
Don't you understand some steps or do you still need help?
Try reading this. It is a great tutorial about flashing your device including the MTTY procedure.
If you still can't get a clue of it don't hestitate to PM me!
You can also add me to msn, see the msn icon to the right of my post.
when i tried to upgrade to 'Unsigned-Hard-SPL-Diamond-OliNex.zip' the progress bar on my phone and the computer go up to 100% in less than 2seconds, then it says 'error [270]: update error
the image file is corrupted. please check your update utility'
And on my devices bootloader screen it says 'upgrade ROM code error please try again'
devyn_ciara said:
when i tried to upgrade to 'Unsigned-Hard-SPL-Diamond-OliNex.zip' the progress bar on my phone and the computer go up to 100% in less than 2seconds, then it says 'error [270]: update error
the image file is corrupted. please check your update utility'
And on my devices bootloader screen it says 'upgrade ROM code error please try again'
Click to expand...
Click to collapse
Are you using Vista? If so, try it on another computer
Another problem could be that the package is corrupted. Try downloading it again.

Wiered screen

Does someone know what this mean? Every time i boot my device i`ve got this screen. If i push power button all my data will be lost, but if i push the round circle or do nothing devise boots normally.
I had this earlier and i did mtty and i assumed that this problem was gone, but no. I have my own rom (23053) and after flash ewerything was fine. This thing come up later when i had to do soft reset.
Nobody?? What is this?
something went worng in the flashing process of your own rom.
there are 2 ways of fixing this.... MTTY or flashing an original rom, an then reflash your own rom.
I recommend you the second one heheh
From MRM2007's signature you can find an original rom
http://ifile.it/_hq1nlzf/Diamond_ROM-Radio-SPL
Also the most safe way to do this is from your internal storage, puting diamimg file in your internal storage, go into bootloader ( press <-- + VolDown while softresetting) and follow instructions.
Flash that one, hard reset, flash your rom, hard reset and test it again...
Credit goes to mrm2007 that help me with this also.
Mariano.
I did earlier MTTY and i tought that everythin vas fine. But no. Earlier when i had some boot broblem, my device just did hard reset, no that kind of screen.
That`s not a broblem for me. I`m just courious what that might be.
By the way. I allways flash roms in internal storage.

Desire won't boot into recovery or OS, Bootload & Fastboot works

I don't know what I did wrong. After downloading a moddet statusbar vor Oxygen 0.2 I wanted to reboot into recovery and it took me very long. It freezed. After pulling the battery and setting it back in and pushing the power button my desire vibrated in 3 short intervals.
Since that I can't boot into the os or into recovery. Only thing that is working is the bootloader and the fastboot.
First thing I tryed is to flash (with fastboot) a new recovery but nothing changed. still it freezes at the splash screen.
I also downloaded official o2 rom from their homepage. But I think they want me to run the .exe while in android. A error comes up and tells me that it can't find a phone.
official htc roms don't work too. one told me that I'm not allowed to install this particular rom and an other official rom keeps exiting with error code: 170 telling me that the usb connection couldn't be established or something like this.
is there something else I can try?
I googled and searched the board. Tryed to boot into recovery without microSD card too but still no success.
help
Unpack the Rom and get the image out of the file...
Rename it to pb99img.zip dump only that on the root of your sdcard and boot into hboot .
T i d y .
Or just look on shiped roms for an 02 pb99img.zip and download then rename
T i d y .
Thank you so much. I already tryed this with 3 different pb99img images and had always the same error (CID). One of them was a o2 uk rom. So I gave up on trying it this way. But I didn't know that it could be extracted from every rom.
Now I think every thing is working again. Thank you.
Oh well ... I destroyed it again. Like I said I was able to install official o2 rom and everything was working again. After that I wanted to root it with unrevoked 3.21 but it freezed at "waiting for reboot". So I had to pull the battery once again.
But now I can't even enter bootloader. Only a screen pops up with htc in the middle and with four ! in every corner of the display.
Tryed to install official o2 rom again. It can find it and starts installing but at the end of the installation it stops with an error:
error [110]: error while opening data. Tryed it 3 times but always the same.
This might work for you
WAIT, BEFORE YOU START, CREATE A GOLDCARD. IT IS VERY NECESSARY. THINGS WILL GO WRONG IF YOU DONT.
EDIT: YOU MUST BE ABLE TO BOOT GO TO THE BOOTLOADER MENU.
Firstly, download this file. http://dl.dropbox.com/u/13240777/Desire Downgrade.ZIP
Extract the files.
Run the win-down.bat file.
Follow on screen instructions.
After the process is completed, Head to the root of your SD card and check if there is a file named P99***IMG (FORGOT THE EXACT NAME BUT IT SHOULD BE SOMETHING LIKE THIS) there should be one.
Secondly, disconnect your phone and turn it off.
After that boot up your phone while pressing the volume down button and the power button.
The bootloader should be checking for files after awhile and once it found the file that is supposed to be in the root of your sd card, press the volume up button (NOT EXACTLY SURE, SHOULD BE THE ONE THAT SAYS YES AND CONTINUE)
It should be writing files to your phone. and replaces everything. E.G: HBOOT, RECOVERY,RADIO and such.
It should be writing files successfully and then it would ask you to reboot. Continue with the reboot and you should be having your Desire back to stock. Perfect.
PLEASE KEEP IN MIND THAT THERE ARE RISKS INVOLVED LIKE FAILURE OF WRITING TO THE HBOOT. PLEASE REMEMBER TO FOLLOW INSTRUCTIONS. MAINLY, DO NOT BLAME ME FOR ANYTHING THAT GOES WRONG.
FINALLY, YOU SHOULD BE READING EVERYTHING UP TO HERE AND THAT YOU MUST HAVE A GOLDCARD (A GOLD SD CARD)
Hope this helps you and please ask if you have further questions. PM me if the questions cannot be answered here. Good Luck
You have to have a working Goldcard and be able to access HBOOT to do the above
Nevermind.
I send it to o2. Since I was able to install the official RUU once I think they will take care of it.
What happend is:
For some reason I wasn't able to boot my phone. Recovery wasn't working too. Only thing that was working was Bootloader and Fastboot.
Just to sum up what I tryed:
Installing new recovery didn't help. I was able to install official o2 RUU and everything was working. But I lost my root. I think it had HBoot 0.930001
So I wanted to root it again with unrevoked 3.21
It started well and rebootet one or two times. But at the thirt reboot attempt it juft freezed and nothing was happening. I don't know what I did wrong?
is unrevoked 3.21 really able to root a phone with hboot 0.930001?
As I said ... if faild and after that I couldn't even enter Bootloader or Fastboot.
So I send it to o2 and hope they fix it.
But now I am really scared to root it again. If it fails again ... what will they think if I send it after 3 days again to them.
Peikko said:
Nevermind.
I send it to o2. Since I was able to install the official RUU once I think they will take care of it.
What happend is:
For some reason I wasn't able to boot my phone. Recovery wasn't working too. Only thing that was working was Bootloader and Fastboot.
Just to sum up what I tryed:
Installing new recovery didn't help. I was able to install official o2 RUU and everything was working. But I lost my root. I think it had HBoot 0.930001
So I wanted to root it again with unrevoked 3.21
It started well and rebootet one or two times. But at the thirt reboot attempt it juft freezed and nothing was happening. I don't know what I did wrong?
is unrevoked 3.21 really able to root a phone with hboot 0.930001?
As I said ... if faild and after that I couldn't even enter Bootloader or Fastboot.
So I send it to o2 and hope they fix it.
But now I am really scared to root it again. If it fails again ... what will they think if I send it after 3 days again to them.
Click to expand...
Click to collapse
Well lad you had USB brick, easy to fix.There is a thread on this thing.
I am having similar problem described.
Currently I can get into Fastboot, and have tried reflashing recovery but still boot loop.
What should I do now?
please help my desire break
my desire wont work into recovery and os only work in fastboot and hboot.
i am root desire and install custom rom arabic after flash not boot up,usb work into only charge, but not work lcd
i am install recovery clock work mod slcd on recovery clockwork mod 2.5.0.7 and break recovery.
now not work os and recovery.
please help me please.
BRAVO PVT3 SHIP S-ON
Hboot-0.93.0001
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30-2
Aug 10 2010,17:52:52
please help me.
Hi,
I have the same problem and getting pretty desperate now.
Only FASTBOOT and BOOTLOADER works.
I have clockwork recovery installed but it wont boot into recovery. It just gets stuck on the white boot screen.
I can't copy PB99IMG.zip or any other zip file because I can't access the phone through usb. I tried:
adb push PBIMG99.zip /
error: device not found
Is my phone useless now? As good as a brick?
try pack it in some tolietpaper put it in to the freezer fore 5 min an try again
jalal.arkat said:
my desire wont work into recovery and os only work in fastboot and hboot.
i am root desire and install custom rom arabic after flash not boot up,usb work into only charge, but not work lcd
i am install recovery clock work mod slcd on recovery clockwork mod 2.5.0.7 and break recovery.
now not work os and recovery.
please help me please.
BRAVO PVT3 SHIP S-ON
Hboot-0.93.0001
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30-2
Aug 10 2010,17:52:52
please help me.
Click to expand...
Click to collapse
janielsen's idea seems crazy but give it a try..
put it in the freezer for few minutes then take it out
and then try to get into recovery mode..
you'll be able to do that
if you see a triangle with ! mark at the center that means it's a serious hardware issue and we can't do anything about that you have to send it to htc service center
Ha, funnily enough I did try the freezer thing but that didn't work either. What did work was booting into fast boot, connecting the usb and flashing with an official RUU in windows.
The phone is still stuffed!!!
It now has an official htc rom, no root, no mods, nothing... just stock!
But whenever it has to do a bit more processing like viewing a complex web page with flash, playing a game, downloading from the market it resets itself. Why?
I am starting to think it's a hardware problem but I need confirmation. I tried different roms but I get the same result. Has anyone has the same experience???
well i have sent my phone in fore repare the trick whit the freezer is only so u can unroot it so they cant see that it has bien rooted
the problem is that the cpu is getting to hot
Hey janielsen,
I had a feeling it was a hardware problem, because it only resets when it's doing a lot of processing.
But what can they do? Replace the CPU? Did they say how much it costs?
I bought my phone second hand so I don't have warranty.
yes u have warrenty because htc can see by the imei when the garanty is running out
they will replace the mainboard
FreshNClean said:
Hey janielsen,
I had a feeling it was a hardware problem, because it only resets when it's doing a lot of processing.
But what can they do? Replace the CPU? Did they say how much it costs?
I bought my phone second hand so I don't have warranty.
Click to expand...
Click to collapse
i thit also buy my second hand an didtn have the warrantypapper
but they said that i still have the 2 year warrenty so my is in fore repair
i shut get it back this week

[Q] Problems with bootloader [SOLVED]

I had 3.29 HardSPL, i used Android on nand for quite some time, after that i decided to flashed back to WinMo to check something out, in one of the guides, it told me to put the kaisimg.nbh and kaisdiag.nbh, (i had flashed back to WInMO several times but never included the Kaisdiag.nbh, since the guide mentioned it i thought it was something good to do)
i used the official WM6.1 and entered bootloader as usual... then my device reset in the middle of flashing...
When i tried again bootloader got stuck at 'Loading...' and the bootloader was now showing 3.34.000
Now i am unable to flash the windows ROM or HardSPL as they all got stuck in the bootloader at 'Loading...' also tried with bootloader in USB mode... nothing
Please help me... thanks in advance
BTW, luckily the android kernel was still functional and i can use it for now...
I posted this in the TyTn General Discussion section but since i got no reply for days, i reposted it here, so sorry in advance for the double thread.
Put the kaiser in boot mode, connect to a pc and flash an original rom from windows. Then reflash hard spl.
l1q1d said:
Put the kaiser in boot mode, connect to a pc and flash an original rom from windows. Then reflash hard spl.
Click to expand...
Click to collapse
Thanks for the reply... i tried this, dont know if i did something wrong but it still got stuck, i used the stock 6.1 asian, it was originally a swedish kaiser so do i need that particular rom?? i will try again...
I tried RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar but while it was flashing, it got to 1% on the computer and then the device just resets
It said Error [294]: Invalid vendor ID
the update utility could not be used for your PDA phone on my PC
Finally solved... i went to htc website and downloaded the update using my phones serial number... i successfully flashed back to WinMo using that ROM... now i can use hardspl again... thanks for all the help

[Q] help newbie error

i have a wildfire s (rooted with s off)
i was getting memory problems whenever i was installing software. it was saying memory full, so i tried using methods to use ext2 partirion on sd card to use as system memory.
i could not get this to work.
so i thought i would look into putting a custom om on the phone to see if i could do it that way.
i installed clockworkmod recovery on the phone and selected backup, to back up my existing rom.
this was taking hours so i pulled battery and done a factory reset on the phone.
this worked. i then found a rom to put on there and just tried installing rom through cwm in android.
this failed and crashed my phone.
i am now stuck on the htc logo screen while loading. i have tried using the volume and power button to get into boot loader and tried going into recovery and the phone just hangs on me.
is there a way i can install the stock rom back on the device to get it working again just by putting in on the memory card. or is there any other method someone can suggest to me to help me get my phone back working.
i am not very good when it comes to these sorts of things, so if i could be pointed to and idiots proof method of doing this, it would be much appreciated.
sorry to trouble you all if this has been asked so many times.
thanks in advance
http://forum.xda-developers.com/showthread.php?t=2388800
you need a goldcard
got goldcard
hi i tried putting a goldcard in there and following the prompts. i have a xtc clip. i think the problem occurred, halfway through flashing a new rom to the device, not quite sure.
i reload the phone but it just sticks at the htc boot screen.
is there a way i can put the stock rom for the phone on the sd card and reinstall the rom from there.
i tried going through recovery and nothing happens.
any help in this would be greatly appreciated.
thanks by the way
partially there
i followed and run the rom utility in this post
http://forum.xda-developers.com/htc-wildfire-s/general/ruu-marvel-s-htc-europe-2-26-401-4-t2868450
it sounds like the phone is booting up but the screen is blank. not sure what to do now. arhhh
can anyone help. please.
cant even get into booloader. that is blank now
ruu
is there another ruu utility that can restore this. i used the one mentioned above and it partially fixed the phone.
the phone boots up but the screen is black. it was not like this before i used the ruu utility. i cant even see the bootloader, but i can use it's functions
plaease help
thanks
ok . i think i have cured the black screen issue and i hope it is now working.
i download : RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed(1).exe
i got this from : http://www.androidruu.com/?developer=Marvel_MarvelC
so a big thank you to all them. and thanks to elise_s1 for trying to help me out.
i will try a sim in there now and leave well alone in future i think. lol

Categories

Resources