To make a long story I had a problem and managed to "steal" an SD card from another device and got it fixed... I freaked too soon..
I would obviously delete this thread if I knew how.. or even can.. if not, a mod can do that for me..
Related
Hi to everybody!
I've a little problem with my artemis (with wm6)
I flashed the memory withouth remouving the sd card (1gb) and now the pda doesn't see it.
I tried everything,soft and hard reset,system upgrade and patch but nothing work...
Please someone help me!
thanks
I didn´t try it, but maybe this:
http://forum.xda-developers.com/showthread.php?t=305531
will help you.
Good luck!
is that a sdhc card you are using? look for the sdhc patch, in case the rom u use doesnt have it integrated!
elsewise reflash!
good luck
duplicate thread.. matt give the same what i want to give
really thak you for your suggestion but no one works...
I hav already tried to reflash with no success and now i use the patch fot sd corrupted and still doesn't work..
it's not sdhc,i tried that patch 2 hours ago..
I'm starting crying!!
y_bother said:
duplicate thread.. matt give the same what i want to give
Click to expand...
Click to collapse
Sorry i can't find another 3d..can you post the link?
Thank you
sorry mate i meant by that.mat2206 gave the same link i wanted to
i was alittle busy when i open your thread and i posted the link without refreshing it. so i removed it
i'll tray to find a solution for you
y_bother said:
sorry mate i meant by that.mat2206 gave the same link i wanted to
i was alittle busy when i open your thread and i posted the link without refreshing it. so i removed it
i'll tray to find a solution for you
Click to expand...
Click to collapse
ok no problem
thank you for your (future) help!
along time ago.. when i have a nokia mobile (N-gage) a similar problem happened to me.
just a suggest.
try to open it by a vard reader and repartition it. and formatted with fat32
don't know if it works.
some say this worked with them
Make a registry change: hklm>>>drivers>>>SDclass>>>disablepowermanagement: 0. (change this for 1, soft reset and try again...)
ok..something strange is happened so i have to say a long story.
This summer i had a normal nokia with that 1gb sd card but it finished into the sea so i had to change it but i keep the card.
when i tried it in the p3300 it worked but it was full of old stuff so i touch "delete memory" thinking it was referred to the sd.After that the artemis didn't read nothing:mine old 1 gb card and the 512mg card i find in the premium package.
After the uptade to wm6 i just tried mine 1gb card and then ask for suggestion in this forum.
I have just tried the other card,512mb and it works!
So,can i say that is the 1gb card that in doesn't work? (remember that it is finished into the sea..)
thank you for your patient!
Okay, i'm new here but reading all of your threads is just confusing me.. there is so much conflicting information.
To begin, I bought my phone HTC EVO at the sprint store before i was even considering this thing called "rooting". I did the OTA update, didnt know any better at the time... however I did toast's root and I honestly have no idea if i got it to work or not but I was able to do the ad blocking thing and what not.....
I started having an Sd card error on my camera, telling me i had "insufficient rights" to the card...
and the video camera in Qik simply didnt acknowledge that there was a card at all and to insert one.
Now. I attempted the OTA, to fix the SD card, and i thought it worked at first but then it acted up again.....
Now i'm hearing this thing about Unrevoked?? if i have already done it toasts' way can i still run unrevoked or is it advised that i flash it back to stock rom and wipe all my data AGAIN....
anyways heres the funny thing...
i had an extra 8GB micro sd card from my Touch Pro 2, and I put in my EVO and formatted it... and.... now everything works fine....
my version is still 1.32.651.1
What should I do now? Since im not having any problems since i changed the card...
is there data on that card is necessary? or that i can just transfer over?
I dont want to perform the OTA again, but i know if i did it would answer alot of questions based on the result...
I need advice...
Please
Class 6 works perfect for me
I havent had any problems since I changed my sd to a class 6
http://forum.xda-developers.com/showthread.php?t=695844
this is not development. should not be in this topic
DanDroidOS said:
I havent had any problems since I changed my sd to a class 6
Click to expand...
Click to collapse
Ditto here.... didn't have the problems before though , but I had a class 6 8GB in my G1 that was gonna go to waste anyway....
yea i havent had any issues either after replacing the sd card *knock on wood*
timothydonohue said:
http://forum.xda-developers.com/showthread.php?t=695844
this is not development. should not be in this topic
Click to expand...
Click to collapse
well actually it does since it was caused by a rooting issue by one of your other members and i didnt know whether to respond to it in its thread but it had to do with other subjects such as alternative rooting methods and what the next course of action since this issue is currently going on. sorry if I couldnt find the place to put it. but otherwise it just would have gone into the thread which people are still asking what root is.
hello... why i cant access internal sd card after flash?
it says "no sd card inserted" when i want open "my files"
You flashed with your SD in?
Sent from my GT-I8150 using XDA App
With rom did you flash?
Sent from my GT-I8150
Go to recovery (Vol UP + Power + Home) then wipe data and cache or do factory reset
After that flash it again
sorry all for quiet a few days...
i flash with no sd card insert...
flash with cowthgun slim shady...
after a few days keep try n error now my sgw cant turn on...
even when i put charger oso nothing out on screen...
that's sound like a hard-like a **** brick man..
Maybe it caused by sd swap(vold.stab) thing that apply on that rom..and then u flashed with no extrnal-sd inside..that causes havoc.!
If u want unbrick DIY style..google this;usb jig
If u don't want get ur hands dirty,service centre..
Gud luck..
Sent from another space
jahlee said:
that's sound like a hard-like a **** brick man..
Maybe it caused by sd swap(vold.stab) thing that apply on that rom..and then u flashed with no extrnal-sd inside..that causes havoc.!
If u want unbrick DIY style..google this;usb jig
If u don't want get ur hands dirty,service centre..
Gud luck..
Sent from another space
Click to expand...
Click to collapse
brick??? oh no...
flash with cowithgun slim shady is working actually...
then after i notice that i cant access my files (it says 'no sd card inserted'),
then only i try n error using swap,mount n unmount using root toolkit...
after nothing happen n i really tense with it,i off my fon...
BANGGGG,my sgw cant turn ON already... until today...
its because of whatar actually?
im just use 2 weeks... i suspect its because overheat cause at the cover area camera its like got a buble there... or its because software problem? cause i wanna claim a warranty by SME... but need to wait until next (now close 1 week for Chinese New Year).
am i possible to claim warranty if its caused by software?
thats the point.. if they can detect its my problem,is there any warranty?
but im strongly trust that my fon is overheat cause got a bubble at camera area near to micro-usb port...
P/s : back to b4,im use a thether to connect to internet while im doing my rooting,flashing...
b4 that,i'
cairo87 said:
am i possible to claim warranty if its caused by software?
thats the point.. if they can detect its my problem,is there any warranty?
but im strongly trust that my fon is overheat cause got a bubble at camera area near to micro-usb port...
Click to expand...
Click to collapse
If it would have been the software of Samsung(stock rom), which would have caused the overheat, you would have been on the safe side.
But because you were using a custom ROM, which even provides overclocking, which most probably caused the overheating and bubble, you actually don't have any warranty left. You can just try to send your phone to Samsung and if you are lucky they won't find out you were flashing custom ROMs and they might replace it.
BTW: A Topic with the name "Plshelp" is not very useful. If everybody would do that, this forum would be a mess. So next time think about a topic which expresses the problem. If you could change the name of your topic it would be good.
good luck
THE-E
THE-E said:
If it would have been the software of Samsung(stock rom), which would have caused the overheat, you would have been on the safe side.
But because you were using a custom ROM, which even provides overclocking, which most probably caused the overheating and bubble, you actually don't have any warranty left. You can just try to send your phone to Samsung and if you are lucky they won't find out you were flashing custom ROMs and they might replace it.
BTW: A Topic with the name "Plshelp" is not very useful. If everybody would do that, this forum would be a mess. So next time think about a topic which expresses the problem. If you could change the name of your topic it would be good.
good luck
THE-E
Click to expand...
Click to collapse
ok... hope they wont find out why my fon become like this...
hope they just replace it...huhuhu...
btw,thx 4 da advice...^^
cairo87 said:
ok... hope they wont find out why my fon become like this...
hope they just replace it...huhuhu...
btw,thx 4 da advice...^^
Click to expand...
Click to collapse
Yeah..I wish u luck man...
I once bricked my phone too..a sgs..but not because of overheating,but flashed a wrong rom..
I send it to service centre and they ask me how its happen..i'm just telling that "I don't know anything about that ****.."after 4 weeks of miserable waiting they finally call..
They said,its caused by mainboard failure and replace it by a new one..haha..I'm just lough in their back..they dont find out that I rooted my device and mess it up..
Good luck bro..
Sent from another space
jahlee said:
Yeah..I wish u luck man...
I once bricked my phone too..a sgs..but not because of overheating,but flashed a wrong rom..
I send it to service centre and they ask me how its happen..i'm just telling that "I don't know anything about that ****.."after 4 weeks of miserable waiting they finally call..
They said,its caused by mainboard failure and replace it by a new one..haha..I'm just lough in their back..they dont find out that I rooted my device and mess it up..
Good luck bro..
Sent from another space
Click to expand...
Click to collapse
sorry all...
my mistake...
its not becoz of overheating...
i tot there is bubble.. no,its not... its juz a design...
sorry again...
i think its because software problem cause of i keep try n error use mount n umnount in root toolkit...
my battery is ok...(test with another sgw)
now plan to go to SME on this wednesday...
hope i got luck as u bro...^^
if not,i dunno how to do...
maybe try USB jig?
Im sorry, i know this topic has come up a thousand timed but i still have found no solid answer. I am on Wicked rom right now. I went into recovery to flash the new rom but team recovery wont show the zip files on my sd card. After trying some other things and different sd cards now i have noticed nothing including root explorer wont see zip files. sometimes it will show pictures or music but not usually. usually the phone wont even see the card at all. iI have heard everything from reformat to the springs that hold the card are worn and need to be bent back to class 10 (which is what I used since i got it) wont work with the s3 to 64 gigs wont work. My phone is starting to act up and I really want to try a new rom ( not that I dont love the Wicked rom) just want to try something else and also hope to get rid of the bugs im starting to get. is there a way to flash a rom without an sd card installed or has anyone figured out the problem yet with the sd card issues? Again, sorry if this has been answered but I've spent hours trying to figure this out. Thanks for any help and I'll be sure to hit "thanks"
it is possible to flash a rom within your internal storage.
Now I have a 32gb sd and it reads fine dont know what class though.
I used cwm and the other recovery from goomanager their good so it might just be you're sd card hardware thingy,
If i were you I would ask to give you another s3 under warrenty because thats not normal bro lol as far as the rom goes... I havent used wicked but im sure it should be able to read you're sd no problem.
And this should of gone to the Q&A section but hey.... you win some.... you lose some......but you live!......you live to fight another day!
Sent from my SGH-T999 using xda premium
The_F_Word said:
it is possible to flash a rom within your internal storage.
Now I have a 32gb sd and it reads fine dont know what class though.
I used cwm and the other recovery from goomanager their good so it might just be you're sd card hardware thingy,
If i were you I would ask to give you another s3 under warrenty because thats not normal bro lol as far as the rom goes... I havent used wicked but im sure it should be able to read you're sd no problem.
And this should of gone to the Q&A section but hey.... you win some.... you lose some......but you live!......you live to fight another day!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
your right, i did get it in the wrong section. oops. thanks though
so hey to all, Im moetiquable.. first time posting here.. ive always been an apple man, but.. time's changing
i bought myself a zenfone 2 550ml some time ago, and i decided to root it; this went on perfectly, but i do have a couple questions i hope anyone can answer:
1- ive backed up my data with TB on my sd card.. is that good enough to restore if anyting happens ?
2- i want to install CM 12 (is it the newest version?).. thus i need to unlock bootloader.. ive found tons of manuals on how to do it for 2.19.40... Alas, i have 2.20.40.. will it work? does anyone have a guide on how to with 2.20 pouwiiiiiiiiiiiiiiiz =D ?
3- i thought about installing CM.. but i dont know if anyone can reccomand a better rom.. (btw.. how do you flash roms... this is some business i havent been capable of understading)
4- im just scared that i would mess something up and my whole phone goes brick and useless... any advices how not to get to that point? and what happens if i get there? how to "restore" my phone to when it was working...
thats all the question i have ... for now..
I WILL BE BACK #terminatoraccent
thanks for those who will take time to answer my newbie questions ^^