Afternoon all. As with most of us I use the Desire as an integrated MP3/SatNav etc while on the road. The problem I'm having while listening to music via a bluetooth headset is an irritating series of beeps every time the phone loses signal - quite a common occurrence when in a rural area - and I'd like to turn off the audible notification. Can't see anything in settings though, any suggestions as to how to do this?
Also been noticing that when using CoPilot the first half of the voice prompt is missed, almost like its taking half a second or so to engage with the bluetooth. Is this common with all wireless head sets or just the cheap "Clip" unit I'm currently using?
Also been noticing that when using CoPilot the first half of the voice prompt is missed, almost like its taking half a second or so to engage with the bluetooth. Is this common with all wireless head sets or just the cheap "Clip" unit I'm currently using?
Click to expand...
Click to collapse
I can confirm that I also have this, the instruction will be played fully by the speakers on the phone but only get half the instruction (at times) via the Bluetooth Headset although sometimes you get the full instruction through it...
Not sure if helps... I realised the phone volume and media volume are separate! If you put the phone on silent - you can still listen to media such as music and videos. Maybe you could silence the phone (and get rid of that beep) but still enjoy your music.
Just an idea to try...
By the way - the above can be annoying if you need your phone quiet but accidentally turn on any media.... lol!
Ah well, I'd hoped it was the cheap head set but obviously not.
I first came across this problem on my GS3 and hardly anyone cared. Luckily CM10 did away with most of these problems. Now that I have a GN2 I can't use AOSP due to the stylus. How do you guys get around the loud notification sounds from the speaker while you are working in a quiet environment? Having to mute your notifications doesn't seem like a valid option because you might not know you got one then. On every phone I've used in the past, regardless of OS, there was an intelligent audio router that put everything through the headphones. Obviously you are listening to the headphones, so why pump it out the speaker? I'm sure people at the library love hearing blaring whistle sound effects, haha.
Secondly, an issue that CM10 also fixed on my GS3 was handling Bluetooth calls while headphones were plugged in. Once again, every other phone I've owned has been smart enough to allow the Bluetooth to override the headphone connection. This is particularly annoying in my two cars... I have to plug in the audio cable to the aux port, but I also connect to the hands-free systems. When a call comes in, I have to unplug the cable while driving to get the sound through the speakers. Seems like a lawsuit waiting to happen, and a clear sign that someone at Samsung just wasn't thinking about common priorities. These are not A2DP systems, hence the requirement for aux. Though I prefer the audio quality over aux over BT any day, so that should always be an option regardless.
Frustrated, since I don't have a workaround like I did on my GS3. Bah.
this -----> http://forum.xda-developers.com/showthread.php?t=1992947
As far as notifications being on the speaker with headphones. That doesn't happen on my Note
Ringer volume and notifications volume are two different slides, In CM10 they can be merge, on by default i think.
turn down the notification volume from the volumes setting, or expand the volumes (gear button) when you hit either volume button and turn down the notifications volume.
In the bluetooth settings you can configure each device to hand just media, just voice, or both. Again gear button in that menu.
Also "Why does no one care about...blah blah blah" in a topic subject is uninformative and a little insulting, do better next time
skyjedi said:
this -----> http://forum.xda-developers.com/showthread.php?t=1992947
As far as notifications being on the speaker with headphones. That doesn't happen on my Note
Ringer volume and notifications volume are two different slides, In CM10 they can be merge, on by default i think.
turn down the notification volume from the volumes setting, or expand the volumes (gear button) when you hit either volume button and turn down the notifications volume.
In the bluetooth settings you can configure each device to hand just media, just voice, or both. Again gear button in that menu.
Also "Why does no one care about...blah blah blah" in a topic subject is uninformative and a little insulting, do better next time
Click to expand...
Click to collapse
That doesn't explain anything... yes, notifications go through Bluetooth if you use A2DP, but the moment you hook up the actual headphone port, with the basic hands-free profile, like a car, the notification sounds do not come out the aux cable. They either come out of the speaker, or the BT device. Honestly, suggesting to turn down or disable the notification volume is a copout. I think most people are unaware of these issues, and then there are many like you, who strangely just don't care, or sidestep the issue. These are both fairly serious issues, honestly. One could even be life-threatening if you get in an accident while playing with the aux cable.
I tested
ScrapMaker said:
These are both fairly serious issues, honestly. One could even be life-threatening if you get in an accident while playing with the aux cable.
Click to expand...
Click to collapse
I'm going to leave this here http://www.distraction.gov/content/get-the-facts/facts-and-statistics.html
You sir, need to prioritize your life before you hurt someone. (You brought it up)
Also, turning down the volume WILL solve the problem of the volume being to loud.
Of course I wouldn't allow myself to get in an accident due to that, but what is the point of a Bluetooth hands free system when Samsung requires you to fiddle with a cable rightwhen the phone rings?
ScrapMaker said:
Of course I wouldn't allow myself to get in an accident due to that, but what is the point of a Bluetooth hands free system when Samsung requires you to fiddle with a cable rightwhen the phone rings?
Click to expand...
Click to collapse
Looks like you got 3 options.
1. Wait for CM (Support it here http://forum.xda-developers.com/showthread.php?t=2019062)
2. Turn down the volume while you use headphones (Use tasker to automate)
3. Throw your phone in the river and use your HTC again
Also don't text and drive
Shouldn't use your phone at all when driving, since talking actually diverts more of your attention than texting... however that isn't the topic of discussion. I'm more curious why people don't care, myself. It doesn't bother you at all that every time you plug in your headphones in a quiet place, you have to manually turn off your sounds and might miss something important? What about a loud environment? I would never feel my phone buzz in my pocket when I'm running around the data center.
Seems like a mix apathy and not knowing it's an actual bug.
ScrapMaker said:
It doesn't bother you at all that every time you plug in your headphones in a quiet place, you have to manually turn off your sounds and might miss something important?
Click to expand...
Click to collapse
Nothing is very important. Automated with tasker once, never had to worry about it again. People dont care because its not an issue for most and the rest just turn it down.
I myself found it to be very strange. I'm used to HTC phones, they always do notifications through head phones. It would be nice to implement.
Sent from my Galaxy Note II using XDA Premium.
what's a library?
Sent from my SPH-L900 using xda app-developers app
this crap sucks. its a big problem for me. whats the point of the sound coming from the speaker when I have my headphone on? I shouldn't have to turn down my phone and notifacation everytime I'm at the library, school, or gym. last time I post this problem up, I got shot down. obviously, these people never used head phone or bt b4.
I agree. I have the same issue. I really don't care. But it would be nice to know why it does that.
Sent from my SPH-L900 using xda app-developers app
us3rm3 said:
this crap sucks. its a big problem for me. whats the point of the sound coming from the speaker when I have my headphone on? I shouldn't have to turn down my phone and notifacation everytime I'm at the library, school, or gym. last time I post this problem up, I got shot down. obviously, these people never used head phone or bt b4.
Click to expand...
Click to collapse
no it is annoying. i will have to go back through my old stuff and see if we fixed it on the skyrocket and original note
if i recall correctly some files did it while others did not
Sent from my SPH-L900 using xda app-developers app
This has been an issue with Android for quite a long time:
http://forum.xda-developers.com/showthread.php?t=1134516
I would have hoped that Google or Samsung would have addressed this by now but that doesn't appear to be the case.
PsycloneTW said:
This has been an issue with Android for quite a long time:
http://forum.xda-developers.com/showthread.php?t=1134516
I would have hoped that Google or Samsung would have addressed this by now but that doesn't appear to be the case.
Click to expand...
Click to collapse
I'd swear CM10 does it properly, so I didn't thinking was all Android, just TW-based stuff, which we can't use since we have the stylus.
Agreed, this issue did not occur with my galaxy nexus. I hate it on my SIII, whenever I study in quiet places I have to turn the sound down. SOmetimes I forgot, and people look at me like they want to punch my ribs out when I get an email.
Why is this not addressed?
I am using SoundAbout but it causes major issues while listening to audio over the headphone jack. When I'm connected in my car, my music skips randomly. I am using a galaxy note 2.
There is an option under accessibilities that allows you to make your camera flash, well flash, when you get a notification. Not a solution, but another option. Of course if you forget to turn the sounds off and your flash is strobing also, the library I'd going to turn into a discotech... lol.
Well at the library your phone should be on silent or vibrate, if you crashed while messing with your phone in the car and then tried to sue samsung/google you'd be laughed right out of court. How is it anyone's fault but your own that YOU were stupid enough to crash your car because you couldn't leave your phone alone while driving, which is the law in most states(no phone while driving) you can also set a profile to lower the ringer/noti volume when headphones are plugged in. No one cares because its not an issue for anyone who sets up their profiles properly.
I like to break stuff!
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly neighborhood Moderator
I've been having issues with my S3 (sprint) for a little while now. Most of the time it's no big deal, but now that I want to play with Tasker AutoVoice, utter!, and voice commands in general, it's growing. I am running the 8/13 nightly of CM 10.1, but the issue has been going for a while now.
Here be the problems.
First, if I make a call, I have to use the speaker phone to be able to hear, the ear piece and mic don't seem to work quite right. BUT, if I get a call, there isn't a problem. Headphones with an inline mic work perfectly though.
Second, I cannot use the voice comands, Google Now, AutoVoice, or the like and I have ben talking directly into/at the microphone on the bottom of the phone. The phone doesn't register like it should, where the microphone flashes and shows that it "hears" you. The Google Sound Search lockscreen widget wil occassionally pick up sounds to identify the song, but that's hit or miss.
Third, the speaker doesn't work for media. YouTube, Play Music, what have you doesn't play from the speaker on the device. Well, I take that back, it has once, but only once. Headphones work perfectly though.
Now, I got my S3 from Best Buy and this is actually a replacement, and things worked out of the box. I don't know if it is a refurbished unit (my guess is that it is), so that could have something to do with it too. I'm tending to lean towards a software issue, maybe I just need to flash something to get those issues resolved? Any help I can get to resolve this, that would be awesome. I'd like to get it fixed rather than replaced as it takes forever to get a replacement, but I haven't removed that option. Thanks in advance and I'll try my best to offer up any and all information I can.
When I connect my G3 to my car stereo via aux, tracks change forwards or backwards, when I give the phone a shake to either left or right. A track also pauses if I shake the phone towards me and starts playing when i shake it away from me. The phone is also very eager to launch Voice Mate when listening music like this.. None of these issues occur if I listen to music with headphones or the phones own speaker. I can't find anything in the settings that would turn this feature/problem off. Has anyone experiences this or know how this could be set off?
Dfthy said:
When I connect my G3 to my car stereo via aux, tracks change forwards or backwards, when I give the phone a shake to either left or right. A track also pauses if I shake the phone towards me and starts playing when i shake it away from me. The phone is also very eager to launch Voice Mate when listening music like this.. None of these issues occur if I listen to music with headphones or the phones own speaker. I can't find anything in the settings that would turn this feature/problem off. Has anyone experiences this or know how this could be set off?
Click to expand...
Click to collapse
This is not a feature, its one of many bugs with the AUX-output. Sometimes you get the voice mate problem, sometimes skip tracks, audio explosions, buzzings and alot of times the output is not recognized at all.
There is a long thread about this on the forum but as far as I know theres no solution to this particular problem yet. Maybe a ground loop isolator solves this problem too?
Dyln said:
This is not a feature, its one of many bugs with the AUX-output. Sometimes you get the voice mate problem, sometimes skip tracks, audio explosions, buzzings and alot of times the output is not recognized at all.
There is a long thread about this on the forum but as far as I know theres no solution to this particular problem yet. Maybe a ground loop isolator solves this problem too?
Click to expand...
Click to collapse
Yeah, it seems there are alot of aux and audio problelms. I hope some of these problems can be fixed via ota updates but i'm thinking about returning this phone..
I have a Verizon G3 but figure this forum gets more eyeballs, and perhaps this is a universal Bluetooth issue.
I use the LG Tone+ HBS-730 headset with my phone. If I go into a music app and start playing music through my headphones with the app, no problem. But, let's say I pause music for a while, or turn the headphones off for a bit. I turn the headphones back on, press the play button on the right side, and nothing happens. The headset is still on - I can long-press a button and get the double-beep, but my music won't play. Sometimes it does, but most of the time, it doesn't. I switched from the stock Music player to Rocket Player, which has proven to be a little more successful.
Is there a setting I'm missing somewhere, or is this a common BT occurrence? Control is through the AVRCP BT profile, I believe. I know on my G2 I'd sometimes lose control sync with my phone, where I couldn't skip or pause the track through my headphones. This new problem seems like a magnification of that problem.
Overall, I do find the BT performance a little worse than the G2. I get more audio drops when the phone is in my pocket, but this is when I'm outside and BT is not great outside in general.
Thanks everyone - I have five days to decide if I want to return this phone, between this and some signal problems.
bluetooth connects. calls ok. media plays on device.
WheresTrent said:
I have a Verizon G3 but figure this forum gets more eyeballs, and perhaps this is a universal Bluetooth issue.
I use the LG Tone+ HBS-730 headset with my phone. If I go into a music app and start playing music through my headphones with the app, no problem. But, let's say I pause music for a while, or turn the headphones off for a bit. I turn the headphones back on, press the play button on the right side, and nothing happens. The headset is still on - I can long-press a button and get the double-beep, but my music won't play. Sometimes it does, but most of the time, it doesn't. I switched from the stock Music player to Rocket Player, which has proven to be a little more successful.
Is there a setting I'm missing somewhere, or is this a common BT occurrence? Control is through the AVRCP BT profile, I believe. I know on my G2 I'd sometimes lose control sync with my phone, where I couldn't skip or pause the track through my headphones. This new problem seems like a magnification of that problem.
Overall, I do find the BT performance a little worse than the G2. I get more audio drops when the phone is in my pocket, but this is when I'm outside and BT is not great outside in general.
Thanks everyone - I have five days to decide if I want to return this phone, between this and some signal problems.
Click to expand...
Click to collapse
I come from the philippines and i have the g3 also. my bluetooth connection was fine it connected to my car and headset but now it only receives calls but does not play music through my bluetooth headphones. when i press the play button on my headset it plays on the device itself. checked under bluetooth setting and call and media and audio was checked.
my device is rooted. i did a factory reset but the problem remains unfixed. please help. i have installed g3 tweaksbox but i dont see any mods that is related to music apps. i dont know what to do. i have considered unrooting and flashing stock rom.
Also interested in this, as I have the same issue but my car.
Op, did you ever find a fix, or work around?
OP
Do you have any other BT programs loaded? I had something similar when I had the Sony app and a Garmin app loaded. Both use BT to connect to their devices and they were interfering. I removed the Garmin one and my play/pause button started working again
Alan