[Q] Recovery not working, can't install ROM [Solved] - G2 and Desire Z Q&A, Help & Troubleshooting

Hey all, I was trying to switch from G2 HBOOT to the Desire Z HBOOT. I was following the guide and it seemed to work ok. I am not a complete noob when it comes to flashing ROM and using ADB, but it seems I have done something wrong. I don't think my phone is bricked, but I can't do anything with it.
I can't seem to boot into my current ROM (an MIUI ROM), so I am trying to reinstall the ROM. I can reboot into bootloader and recovery from ADB. But when I reboot into Clockwork Recovery, none of the options work. Below the yellow line in CWR I see the following:
ClockworkMod Recovery v.3.0.2.4
E:Can't mount /cache/recovery/command
E:Cant mount /cache/recovery/log
E:Can't open cache/recovery/log
E:Can't mount cache/recovery/last_log
E:Can't open /cache/recovery/last_log
When I select one options (e.g. Install zip from sdcard) it just gives me a black screen with the ROM Manager logo (the funny black hat with the orange circle).
All I want to do is flash a ROM so I can use my phone. I don't care if I have to do a full wipe of everything. I tried finding a way to update CWR, but the link in the thread doesn't seem to point anywhere. I also searched for a way to flash a ROM using fastboot, but none of the options seem to be for the G2.
Options I could use most:
1. How to mount system and wipe
2. How to install ROM via adb/fastboot
3. How to install the latest ClockworkMod Recovery
Any help would be appreciated.

First thing is your SD Card sound?
Are you sure changing hboot work 100% ?
Should be able to mount/wipe from recovery,
you can flash a recovery from fastboot,download the recovery .img look around for the instructions goes something like flash recovery recovery.img
Stick with v.3.0.2.4 as well
http://download.clockworkmod.com/recoveries/
You need the vision version
Or as the two other posts mention don't use the power button to select things!!!!!!!

The errors you are getting are normal after changing hboots.
What button are you using to select items in cwm?
Sent from my HTC Vision using Tapatalk

Don't use power to select stuff in clockwork.
use either trackpad or camera button.
-Nipqer

You know guys, I make a promise to myself every morning that I won't think like, act like, or in any way be like a noob. Today I broke my promise.
Thanks guys. Honestly, I never had a problem using the power button to select options before, so that's why this was totally freaking me out and I didn't even think that that might be the problem. But now I have installed a new ROM and am up and running again.
(quietly to myself)
I will not be a noob...I will not be a noob...I will not be a noob

Related

[Q] Please help! Nandroid restore froze, can't get past splash screen

Well, I started out with CM7 RC4, and everything was dandy.
But then I decided to try out Virtuous. I did a Titanium Backup, then did a nandroid backup and wiped through ROM Manager. Virtuous was horribly laggy, however, so I decided to switch back to CM.
Upon restoring my nandroid, my G2 froze at the 'data' section, and I was forced to pull the battery. After reboot, it couldn't get past the white HTC screen. When I booted back into CWM, I immediately got the following:
"ClockworkMod Recovery v3.0.0.5
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log"
It reloads those errors every time I go back to the main menu of CWM, as well.
Every ROM I try and flash still gets stuck at the splash screen.
I've wiped everything there is to wipe, and any time I try and restore any of my nandroids, I get:
"Erasing boot before restore...
Error while erasing boot image!"
I've been looking for a solution for the past 4 hours and I can't seem to fix it. I don't even know what ROM is actually loaded on my phone.
Please, if anyone can help, it would be greatly appreciated! I just want to be able to actually use my phone.
pokemontrainer4life said:
Well, I started out with CM7 RC4, and everything was dandy.
But then I decided to try out Virtuous. I did a Titanium Backup, then did a nandroid backup and wiped through ROM Manager. Virtuous was horribly laggy, however, so I decided to switch back to CM.
Upon restoring my nandroid, my G2 froze at the 'data' section, and I was forced to pull the battery. After reboot, it couldn't get past the white HTC screen. When I booted back into CWM, I immediately got the following:
"ClockworkMod Recovery v3.0.0.5
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log"
It reloads those errors every time I go back to the main menu of CWM, as well.
Every ROM I try and flash still gets stuck at the splash screen.
I've wiped everything there is to wipe, and any time I try and restore any of my nandroids, I get:
"Erasing boot before restore...
Error while erasing boot image!"
I've been looking for a solution for the past 4 hours and I can't seem to fix it. I don't even know what ROM is actually loaded on my phone.
Please, if anyone can help, it would be greatly appreciated! I just want to be able to actually use my phone.
Click to expand...
Click to collapse
From the looks of it. It seems that you messed up your recovery , all you have to do is go back into fastboot and then reflash/reinstall the recovery.img and everything should be working fine afterwards
derykisonder said:
From the looks of it. It seems that you messed up your recovery , all you have to do is go back into fastboot and then reflash/reinstall the recovery.img and everything should be working fine afterwards
Click to expand...
Click to collapse
I've read a few places that you need the engineering hboot. Is that true?
And how can I tell if I have it already?
Well it appears I don't have the engineering hboot. When I flashed the recovery via fastboot it came back saying "FAILED (remote: not allowed)".
Is there a way I can install the hboot without using Terminal on the phone?
Wow same for my i dont have Eng hboot i thought i put it in my phone but somehow its gone know D: looking for solution :/
OK, I had this same problem and was able to fix it. I d on't know how many of you this will help but here is what I did. I was able to boot into CWM and choose advanced restore where I manually restored the system and data files. I then reboot my device and I was able to get it to fully boot. So far I have seen no real issues with the phone and it's better than a brick; it will at least get you running again so you can try something different if need be.
pokemontrainer4life said:
Well it appears I don't have the engineering hboot. When I flashed the recovery via fastboot it came back saying "FAILED (remote: not allowed)".
Is there a way I can install the hboot without using Terminal on the phone?
Click to expand...
Click to collapse
Ever heard of adb?
Sent from my T-Mobile G2 using XDA Premium App
flash & restore
I had a workaroudn for something similar - basically phone wouldnt boot past splash screen after losing power. I was able to make a CWM backup, and the only way i could find to get all my things back was to do a fresh os flash and work with some nandroid abckup files to try to extract the data out manually - there is one called Nandroid Manager, but it ahsnt always worked for me, but a great concept. worth a try, if not there appears to be other products on the market now which may help

[Q] (Q) Issues with flashing etc on Desire

Well, I have rooted my phone with unrevoked it installed the recovery mod 2.5.0.7 and I'm a bout to flash my phone. Thing is though I've been here for a while.
The story goes like this.. Relatively chronological..
I download HBOOT drivers install them on my Windows 7 64bit. I then download and run unrEVOked3, hook up my phone and choose charge only. unrevoked3 does it's thing and everything seems fine. I partition the SDcard with 6,5gb fat32 and 1gb ext4. Then i go into recovery i then go to wipe data/factory reset and chose it. Then i cant find dalvik data at first but i later find it, so i wipe that. Then I chose to install zip from sdcard which earlier moved. The InsertCoin A2SD+ 1.0.9 mod.
It starts up finds the file and starts flashing or so it seems.
It stops, and I cant remember the error message. So, I go searching cant really find anything except the fact that I should have wiped cache partitions also.. So I go back do a full wipe again and run it.
Then I get this error message: ( i tried again with a Cyanogen mod, and i got assert_failed write_raw_image...)
- assert failed: Package_extract_file("boot.img","/tmp/boot.img")
E: Error in /sdcard/InsertCoin_GB_Sense2.1_A2SD+_1.0.9.zip
(status 7)
Installation aborted..
I then find the baadnwz irc and ask for help there.. repartition my sdcard with gparted, and run through it all again...
Same error..
I then notice that CWMR is saying:
E: Cant fint MISC:
E: Cant mount Cache:recovery/command
E:Cant find misc:
E:Cant mount cache:recovery/log
E: cant fin misc:
I ask if this is normal, NO, is the clear answer i get.. so i test different things, new repartition correct sized and everything..
Still same..
Then I go and download the Froyo RUU and install it reset everything (of course i forgot to sync my contacts..) and i do everything from the top root, cwrm and try flashing but the same errors are still there..
So i then create this thread hoping that this error already isnt here after search.. And hoping someone can help me..?
I'm running the HTC Desire on HBOOT 0.93.0001, radio 5.11.05.27.
Worst thing is no matter how many times i wiped the different things no changes were made on the phone, when i rebooted i still got up my original bckgrnd image and everything...
So, what is going on?
It might be worth watching a few vids and reading a few guides. Here's a start http://forum.xda-developers.com/showthread.php?t=1016084. Also, don't worry. I messed up too when I first started to root and flash.
I can't remember what the status 7 error is and how to fix it. Think it's just to re-download the rom and try again.
If you have PVT4 device, you need to use AmonRA recovery.
I guess you're S-ON? If S-OFF try recovery from my sig.
Ironically I have used the tutorial in the development forum.. Used all the videos i could find, except s-off cause i was told i didnt have to do that when i was just flashing a new ROM..
How do i know if i have a pvt4 device?
edit: i found out.. im a pvt4 device..
Then root again, download recovery from my sig unpack .img and choose "custom recovery" in unrevoked and select it.
You can also use AmonRA recovery.
Or if you don't want to root again, S-OFF and flash new recovery in fastboot.
I don't really understand why they made CWM default recovery in unrevoked, people have so many issues with it. :-(
Sent from my HTC Desire using XDA App
spike0209 said:
Well, I have rooted my phone with unrevoked it installed the recovery mod 2.5.0.7 and I'm a bout to flash my phone. Thing is though I've been here for a while.
The story goes like this.. Relatively chronological..
I download HBOOT drivers install them on my Windows 7 64bit. I then download and run unrEVOked3, hook up my phone and choose charge only. unrevoked3 does it's thing and everything seems fine. I partition the SDcard with 6,5gb fat32 and 1gb ext4. Then i go into recovery i then go to wipe data/factory reset and chose it. Then i cant find dalvik data at first but i later find it, so i wipe that. Then I chose to install zip from sdcard which earlier moved. The InsertCoin A2SD+ 1.0.9 mod.
It starts up finds the file and starts flashing or so it seems.
It stops, and I cant remember the error message. So, I go searching cant really find anything except the fact that I should have wiped cache partitions also.. So I go back do a full wipe again and run it.
Then I get this error message: ( i tried again with a Cyanogen mod, and i got assert_failed write_raw_image...)
- assert failed: Package_extract_file("boot.img","/tmp/boot.img")
E: Error in /sdcard/InsertCoin_GB_Sense2.1_A2SD+_1.0.9.zip
(status 7)
Installation aborted..
I then find the baadnwz irc and ask for help there.. repartition my sdcard with gparted, and run through it all again...
Same error..
I then notice that CWMR is saying:
E: Cant fint MISC:
E: Cant mount Cache:recovery/command
E:Cant find misc:
E:Cant mount cache:recovery/log
E: cant fin misc:
I ask if this is normal, NO, is the clear answer i get.. so i test different things, new repartition correct sized and everything..
Still same..
Then I go and download the Froyo RUU and install it reset everything (of course i forgot to sync my contacts..) and i do everything from the top root, cwrm and try flashing but the same errors are still there..
So i then create this thread hoping that this error already isnt here after search.. And hoping someone can help me..?
I'm running the HTC Desire on HBOOT 0.93.0001, radio 5.11.05.27.
Worst thing is no matter how many times i wiped the different things no changes were made on the phone, when i rebooted i still got up my original bckgrnd image and everything...
So, what is going on?
Click to expand...
Click to collapse
try this, we have same problem... http://forum.xda-developers.com/showthread.php?p=16320099#post16320099
Somehow, installing alpharev and s-offing the phone, and then installing a new recovery helped me. Im now running cyanogen 7 om my phone

[Q] I need help fixing my phone i have a whole bunch of eerrors

My Droid Incredible 2 will not boot paste the the the white screen with htc on it and in clock work recovery mod i keep getting errors such as E:Cant mount /cache/recovery/log. E:cant mount /cache/recovery/last_log. E:Cant open /cache/recovery/log. E:Cant open /cache/recovery/last_log.
PLS someone help me
sounds like you need to reflash recovery, flash a recovery image with adb
lookhere will tell you how: http://forum.xda-developers.com/showthread.php?t=1435228
unless your on new software. but if you htcdev unlocked, you'll have to do it this way
Had this happen the other day to my phone as well. I had a bad download on a ROM that I was trying to install. Had to run a stock RUU file and then loaded a custom recovery and then superuser. Things are all good now.
Sent from my ADR6350 using XDA

[Q]+1 A100 bricked

Hello forum Seniors
I have a problem with my a100 device, I searched for days a solution, but had no success.
I bought this device with original HC and updated with ACER_AV041_A100_0.002.00_ww_GEN1 ICS rom, to this point everything working.
everything worked, boot recovery/gps/games/ics/ everything
And I used it for a long time. Then I reseted the device.
And the problem began.
the device does not turn over.
I can START fastboot, but it dont sync with pc (I got drivers instaled)
I can START recovery, but dont install nothing ( I think my recovery is damaged)
I hope that there is a solution. But have not found any yet.
my recovery does not install or mount sdcard and external sd
when I enter, I see a red triangle with a dead android
I PRESS HOME key and recovery list this
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
----end----
I can navigate with VOL keys but i CAN'T select any option
Device not unlocked in fastboot (unluck mode) dont listed
I have the number of ADB connect, is this a CPUID to use in EUU_SBK????
There is a guide to using the EUU_SBK??? link please?????
This is my last hope.
sorry my bad inglish im a brazilian noob
thank all
E:/dev/block/mmcblk1 does not exist
That's recovery. Its saying recovery doesn't exist. If you can wait for a bit I'm working on fixing this but its going slow as some people aren't as clear about whats happening as you are, I was chasing a fix that didn't even need fixing, thank you. Its either something different and new, or its something thats been happening this whole time, but no one mentioned the error output aside from the update.zip failure.
I'll begin work on this new issue, and hopefully it can be fixed with the rest. The other devices seem to have recovery, however it seems it only works in CWM or TWRP, you seem to have stock recovery. I would suggest maybe trying to install CWM from HERE. Follow the instructions exactly and see if you can flash the CWM recovery and get into that. Please report back if this works or not, and what happens when you try.
Hi pio_masaki
Device not BOOTup, freeze in acer logo and I never root this device only apply official update
fastboot can't sync with pc for install a recovery and fastboot is locked
Fastboot display
"Bootloader v0.03.06-ICS: Starting Fastboot USB download protocol"
but fastboot no running any commands
fastboot erase
fastboot flash recovery.img
I try now a new SDcard formated with FAT32 clean, root directory with update.zip, renamed Acer_AV041_A100_1.014.00_WW_GEN1 to update.zip
boot in recovery
------------------------------------------
Erasing cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
----end-----------------------------------
now display dead android with RED TRIANGLE (!), press HOME key
-------------------------------------------
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
------------end-------------------------
note now display E:/dev/block/mmcblk1 does exist<<<<<<<<<<<<<
but I can't select any option in recovery only VOLUME keys work and HOME hide text
I can make Hard Reset with keys
(VOL-)+Power on vibrate swift lockscreen
display
-------------------------------
Erasing cache...
Erasing data...
--------end--------------------
restard and freeze in acer logo.
thank you and sorry my inglish
Your english is fine, don't worry
Ok, so previously mmcblk0p1 was NOT found, now it IS found? Well thats better then nothing. I've seen this on another device, though it was cache that was mounting and not mounting at almost random times.
I've been tracking this as far as I can, and it appears the A100 shares an issue with the A500 (and maybe A200?) that results in a bad sector(s) and must be partitioned around. If this is the actual cause, its a hardware failure, not software, and isn't anything you did, it just died.
This explains the string of bricks that seem to occur out of nowhere.
My original method was to DD a working image to the device, completely restoring the partition with a clone of my working system, cache, recovery, etc. However if its a damaged EMMC, this will not work either. This also explains why past attempts have failed on other devices that I've tried helping with off the forum.
As I can emulate a "bricked" device, I don't have a device with this actual issue to diagnose and attempt to fix, my device doesn't have this problem. I'm not real sure I can proceed much farther until either my device does this bad sector thing, or I get my hands on a device that is already bricked and begin finding the method to repair it.
Ok..now dealing with what DOES work...
==========================================================
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
=========================================================
have you tried selecting any of these options? Highlight with volume, and hit power to select, try from
apply update from external storage and record what it says (hopefully it just installs and your're good to go)
then
apply update from cache and again record what it says, hopefully it works fine.
then
wipe data/factory reset and again record what it says
then
wipe cache partition and record what it says
Do these in the order I mentioned, only doing the next if it fails. If it does install, don't do the rest, just report back success and what you did, in the order you did it, to get it going again.
Edit: Oh and reboot after each selection if it fails, and reboot into that menu again.
This is the problem, can't select any option
I select a option with VOLUME key, put cursor on apply updade from external storage so i hit power
And nothing happens.
If i hold power, device force power off...
Power key work perfect, only in recovery dont work...
Thank you
My friend have the same device with the same update 0.002.0_WW_GEN1, his device work normaly, when i go into recovery, I cant select any option too
I think if i reset his device, this cant boot to...i dont try it
I can upload video in youtube for you, if it help u see my case.
Ok, if power doesn't work on either device, try the home button. It's been so long since I ran stock recovery I may have gotten the buttons mixed up with CWM recovery, which uses Power as Enter. And good call on not doing anything on the other device, you never know. It shouldn't cause issues, but just in case, don't. We don't know exactly what is causing this, and if its anything like the hardbrick bug in some Samsung devices, anything can trigger it if it happens in the right order or time.
pio_masaki
Recovery does not select options when press power /home/reset/volumes
I need a guide for use EUUs_SBK rom, I have my CPUID
And in my friend's device, how i back to original hc?
Recovery have the same problem does not intall update.zip, if I install the CWM, Can I do official update to back original state? I really need back to factory rom and recovery.
Thank you for help
If the device is having issues, I wouldn't suggest going back to HC, it can only cause more problems. If you run the official update.zip it returns back to how it came from Acer, stock recovery, locked bootloader and unrooted stock ICS.
The EUU and SBK stuff has been attempted before and failed. Its in various threads with the same bricking issues, and doesn't seem to help, or work. At this point I think NVFLash is about the only option we have left to try to bring these back from a bricked state. Sadly Acer decided to try to lock out NVFLash, so it'll take some time to see if it will work with our A100s. Vache has the NVFlash config files, so its a start, it may work it may not, however I can't test much as my device doesn't have this bricking issue, so any testing on my a100 doesn't really mean anything.
I've actually looked around locally for a bricked a100 to see if I can get and begin working on a method to repair it, but either there are none locally bricked, or none are up for sale (sent back to Acer for repair).
I'm working on it, but I have a couple roadblocks preventing me from really trying, time, and no bricked device.
Ok doing some more digging around, I've come across a thread with some posts that seem to lead me to believe that (non stock) our bootloaders don't respond to the correct SBK, mine doesn't either, and I think it's because our method for unlocking the bootloader uses the A200 bootloader, which will NOT accept the SBK, even if correct, because its wrong for that bootloader.
This leaves out NVFlash, it can't authenticate with the bootloader so it gets blocked, so while it would fix the bricks (outside of hardware failure) it's not an option for us until we find out the correct SBK for our bootloaders.
For those on stock, the update.zip failures seem to be common, however I have a few things for you to try (I think you're stock ICS right?)
download this update.zip
Its ICS 014, should work.
It seems people had issues with it working because it originally came encrypted, and had to be decrypted to work. If it wasn't, you got update.zip not found or various other errors like you did. Thanks to azmode for this.
Take your external SD card, insert it into your PC however you can, and format it FAT32. Before doing this, copy any and all files you wish to keep safe to the PC as this will erase the card completely. If your card reader has a light, wait for it to stop flashing before moving on.
Take the update.zip file you downloaded and place it on the card. Nothing else, no folders or pics or music or anything else. Again wait for the activity light to stop for a few seconds BEFORE hitting eject. Also verify the file is named update.zip nothing else, and not update.zip.zip which can sometimes happen. All lowercase letters.
Once that is done make sure the tablet is OFF, completely, not sleeping but off. Leave it off for at least 30 seconds (or if its been off the whole time don't worry about it) then insert the SD card. Hold Volume Down (closest to lock switch) then press and hold Power and hold for about 3 seconds until the text FIRST comes up, immediately release the buttons as soon as you see any text coming up.
This should once again attempt to read update.zip from the external sd card, and hopefully finds it, or gives a different error then before.
These instructions aren't much different from before, as various other users have outlined this procedure before, in particular blackshinobi who has spent alot of time on the bricked threads.
That update.zip should be decrypted which should allow it to pass the bootloader checks. I think this is where some of the issue is coming from, its that stupid bootloader encryption blocking even valid attempts to restore the tablet to working condition or updating.
If anyone is willing, could they pull their 100% official stock bootloader and stick it somewhere to play around with? Or, I suppose, someone with a 100% official stock ICS system try NVFlash on their system and see if it allows or gives permission denied? If the 100% official still denies, then our SBK generation is wrong, if it does, then its our bootloaders, and we can attempt to fastboot flash the correct bootloader to pass SBK for EUU.
Have you a alternative link? For update.zip
Error 509
Im upload video now, I'm using update.zip from this link http://forum.xda-developers.com/showthread.php?t=1611696
ACER_AV041_A100_0.002.00_ww_GEN1 is the rom instaled and freeze from here http://vache-android.com/v1/index.php?site=files&file=139
--I think if you install it, you will have the same problems.
and i try this link too http://vache-android.com/v1/download.php?fileID=109 and http://vache-android.com/v1/download.php?fileID=116
-------------------Edit----------------
This is a video for try update with recovery in a100
same problem with 2 devices, but my a100 freeze in normal boot
http://youtu.be/CWFlA1W08wE
Im using a formatted microSD with only update.zip file
I tried all the links above.
thank you for help
Did you ever have any luck getting your tablet running again?
It looks like I am having the same issue as you are. with a couple of minor variations. I've tried all the recommendations in this thread and the ones linked from here but I'm not making any progress. I fear there is nothing I can do and that the device is now a fancy brick does anyone have any other ideas on getting this fixed?
1. When I boot to recovery, get to the dead Android I see the following messages in yellow
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)​
2. When I try to unlock the bootloader in fastboot mode (fastboot oem unlock) the screen blinks off and back on and I never get the lock.
wperry1 said:
Did you ever have any luck getting your tablet running again?
It looks like I am having the same issue as you are. with a couple of minor variations. I've tried all the recommendations in this thread and the ones linked from here but I'm not making any progress. I fear there is nothing I can do and that the device is now a fancy brick does anyone have any other ideas on getting this fixed?
1. When I boot to recovery, get to the dead Android I see the following messages in yellow
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)​
2. When I try to unlock the bootloader in fastboot mode (fastboot oem unlock) the screen blinks off and back on and I never get the lock.
Click to expand...
Click to collapse
Those errors have been identified as a dead emmc, which is currently unrecoverable. And is happening on quite a few of iconia's. This thread was prior to the devs and users finding thee issue. See all the brick threads here.
Ajuda em portugîes
rollidark said:
Hello forum Seniors
I have a problem with my a100 device, I searched for days a solution, but had no success.
I bought this device with original HC and updated with ACER_AV041_A100_0.002.00_ww_GEN1 ICS rom, to this point everything working.
everything worked, boot recovery/gps/games/ics/ everything
And I used it for a long time. Then I reseted the device.
And the problem began.
the device does not turn over.
I can START fastboot, but it dont sync with pc (I got drivers instaled)
I can START recovery, but dont install nothing ( I think my recovery is damaged)
I hope that there is a solution. But have not found any yet.
my recovery does not install or mount sdcard and external sd
when I enter, I see a red triangle with a dead android
I PRESS HOME key and recovery list this
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
----end----
I can navigate with VOL keys but i CAN'T select any option
Device not unlocked in fastboot (unluck mode) dont listed
I have the number of ADB connect, is this a CPUID to use in EUU_SBK????
There is a guide to using the EUU_SBK??? link please?????
This is my last hope.
sorry my bad inglish im a brazilian noob
thank all
Click to expand...
Click to collapse
Ola Amigo parece que você resolveu esse problema, sou brasileiro como você. Estou com o mesmo problema, como voce resolveu isto?
help
Dear All i have the issue with my Skyvega A 800s that whenever i start my phone its open in recovery mode and when i check log it says " dev/block/mmcblk1p1"
Cant format unknown volume: /emmc
Actually before this everything i going smoothly i flashed the rom and the tried to update from sky station when its complete and phone restart the problem comes please help me out please.....
leitejr said:
Ola Amigo parece que você resolveu esse problema, sou brasileiro como você. Estou com o mesmo problema, como voce resolveu isto?
Click to expand...
Click to collapse
adnandani said:
Dear All i have the issue with my Skyvega A 800s that whenever i start my phone its open in recovery mode and when i check log it says " dev/block/mmcblk1p1"
Cant format unknown volume: /emmc
Actually before this everything i going smoothly i flashed the rom and the tried to update from sky station when its complete and phone restart the problem comes please help me out please.....
Click to expand...
Click to collapse
Well this isn't a forum for that device, and not being familiar with it I can only guess. mmcblk1p1 is usually external SD card, if one is inserted, remove it, if one is not, insert one. See what it does on each try. It may be internal SD card too, hard to say since I don't know that device, although a link to it's recovery.fstab would help there, or just /system/etc/vold.fstab.
Sorry,
I'm one concept
This possible installed replicant recovery?
Just for '' flash img'' option
I'm test replicant os for my gtab2 3110, i'm look this option, i'm just copie img for my device and selected '' flash image'' this installed os
( my problematic for my a100 is i'm manually wipe,problem i'm erase file system ( etc,block,bin etc...)) yes i'm stupid men
Sent from my GT-I9305 using XDA Premium HD app
winny57 said:
Sorry,
I'm one concept
This possible installed replicant recovery?
Just for '' flash img'' option
I'm test replicant os for my gtab2 3110, i'm look this option, i'm just copie img for my device and selected '' flash image'' this installed os
( my problematic for my a100 is i'm manually wipe,problem i'm erase file system ( etc,block,bin etc...)) yes i'm stupid men
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
AFAIK it hasn't been made for the a100, so other then that, I dunno.
Sent from my Galaxy Nexus using Tapatalk 2
Ok thanks
You not any solution for me?
Sent from my GT-I9305 using XDA Premium HD app
winny57 said:
Ok thanks
You not any solution for me?
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Besides making that recovery not really, though you can fastboot flash images also.
I'm test this
My device reboot fastboot, this working
I'm flash not working
Sent from my GT-I9305 using XDA Premium HD app
---------- Post added at 02:45 AM ---------- Previous post was at 02:43 AM ----------
I'm not at home but try to remember but as I flash with fastboot
Sent from my GT-I9305 using XDA Premium HD app

DInc Gingerbread Upgrade problem and Froyo CWM Errors - Can't Mount SDcard and Cache

This is a follow-up to my "Problem Installing Gingerbread; currently have Froyo 2.2 s-off" post.Thought I'd repost with an updated title that better reflects progress made so far in restoring my DInc.
Background:
- DInc purchased new; rooted; s-off; Incredikernal; Convert2Ext4_no_data_limit_normal_dalvik mod; CM7.2 (was on Tiny's CM10.1)
- Phone died while listening to music (plugged in to 5volt 2amp Nexus7 charger); would not boot beyond white HTC Incredible screen.
- Tried to restore nandroid backup.
- Upon booting to recovery received numerous “can’t mount” errors in ClockworkMod (CWM).
- Could not access zip from sdcard "E:Can't mount /sdcard/". (Note: also can't mount /emmc/)
- Tried loading image from nandroid backup via HBOOT, with no success
Progress:
- Flashed stock Froyo 2.2 via HBOOT successfully. DInc is working!
- Regained root via unrevoked3 successfully
- Flashed CWM 5.0.2.0 via HBOOT successfully
Issues:
1. Still can’t access sdcard
a. Confirmed card is formatted FAT32
b. SDCard seems OK – flashing image via HBOOT works and sdcard can be read from Froyo
c. Tried "fastboot oem enableqxdm 0" followed by “fastboot reboot” commands. Programs ran but still no access.
d. Tried to re-format a different sdcard in Froyo, card got corrupted!
- Formatted FAT32 on PC, inserted in phone
- “Unmount SDcard” and "Format SDcard" in Froyo, could not “Mount sdcard” in Froyo.
- PC says that SDcard needs to be formatted
e. Help please!
2. CWM mount errors:
a. ClockworkMod Recovery v2.5.1.2
E:Can't mount /dev/block/mmcblk0p2 (File exists)
E:Can't mount /cache:recovery/command
E:Can't mount /dev/block/mmcblk0p2 (File exists)
E:Can't mount /cache:recovery/log
E:Can't mount /dev/block/mmcblk0p2 (File exists)
b. ClockworkMod Recovery v5.0.2.0
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
c. Are these errors possibly related to bad partitions: Should I try Parted per topic 6433 at cyanogenmod forum (sorry, can’t post links)?
d. Are these errors possibly caused by the Convert2Ext4 mod, and should I try to run that again if/when I get my sdcard mounted?
e. Are these errors probably hardware related, and I stop looking for a software fix?
3. Gingerbread
a. I tried to load Gingerbread images (from pvillecomp, and also a version from cmlusco) via HBOOT; but no luck (boot loop).
b. I tried to load the Gingerbread RUU (from pvillecomp), but no luck. Perhaps a HTC Sync issue, but have not yet reloaded HTC Sync.
c. If I can't overcome mounting problems, I would at least like to be running Gingerbread vs Froyo (hence title of original thread).
d. Help please!
Thanks all,
Al
Please don't double post or post a new thread just to edit the title. You can edit your own OP to reflect progress made, (and edit the Title of the OP above the Message/Body portion in the Advanced edit screen).
Have you tried the latest TWRP? I see you have tried the latest CWM.
PonsAsinorem,
Sorry for double-posting, and thanks for taking the time to describe how I should go about changing the title going forward.
Thanks also for the suggestion to try TWRP instead of CWM. Unfortunately I couldn't get TWRP to load.
I downloaded the latest version for the DInc from the TWRP site (openrecovery-twrp-2.6.3.0-inc.img) and tried to load via fastboot - got the error message "FAILED: Remote not allowed".
I then tried to flash via HBOOT (I zipped the twrp image, naming the file PB31IMG.zip). It got to the "Parsing PB31IMG" stage, but I never received the option to Install Yes/No.
Any suggestions on what I am doing wrong?
Thanks again,
Al
BelmontAl said:
I then tried to flash via HBOOT (I zipped the twrp image, naming the file PB31IMG.zip). It got to the "Parsing PB31IMG" stage, but I never received the option to Install Yes/No.
Click to expand...
Click to collapse
Not quite as simple as just zipping. Here, load this one through HBOOT:
PB31IMG.zip - 4.04 MB
PonsAsinorem said:
Not quite as simple as just zipping. Here, load this one through HBOOT:
PB31IMG.zip - 4.04 MB
Click to expand...
Click to collapse
Thanks! That file loaded and I have TWRP running. I then tried to Mount the sdcard. The line item "highlights", but the checkbox doesn't check (The only items that "check" are System and Data).
Should I try "Factory Reset" as my next step?
Thanks again,
Al
Thanks PonsAsinorem for closing the other thread. My apologies again for the double post - I realize now how such a practice causes avoidable confusion.
Trozzul, thanks for your input on the other thread "yeah i saw that too i think it only works with AOSP, i think the problem might be your recovery, i saw that you used two different versions, 5.0.x.x and 2.5.x.x, have you tried the latest, 6.0.X.X? not sure if our ol dinc is update able to 6.0.x.x, i would try another custom recovery too, i know my inc has some flashing issues on CWM"
Per the ClockworkMod website, the latest CWM Recovery for the DInc is 5.0.2.0, so I think 6.0.X.X is not an option. Also, as mentioned above, PonsAsinorem has helped me get TWRP loaded. Am awaiting suggestions for next steps.
Thanks again,
Al
Well I'm just going to watch and see for right now, I'm not sure what's wrong with your twrp, maybe pons will know
Trozzul said:
Well I'm just going to watch and see for right now, I'm not sure what's wrong with your twrp, maybe pons will know
Click to expand...
Click to collapse
OK. Thanks Trozzul.

Categories

Resources