Stuck at bootloader, can't access recovery - Desire Q&A, Help & Troubleshooting

After flashing cm7r2 hboot in order to flash a new rom I got stuck at bootloader and lost access to recovery... I flashed hboot through fastboot, it got done without obvious errors... So I tried flashing a new recovery but I end up every time in the same situation... It just hangs on why so serious screen after vibrating for more than 5 times... I tried flashing differerent hboots, recoveries but that doesn't solve anything... I'm not sure if this is any clue, I tried flashing radio and I get updating error in fastboot...
In the end I tried flashing a ruu (RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed) but I can't go through with it because I'm not in Android or whatever, it says error 170... Maybe if someone can tell me how to get around that ruu's android check I could finish ruu install...
Any help is welcome

I have the same problem, stuck on the white screen with htc logo in it and can't access recovery, tried creating a gold card and ran a RUU exe file, however I always get a customer id error. Hoping someone here can help us both. :-/

@OP boot into fastboot (turn off, hold back & power) and then use the RUU.
@ericbangug your goldcard evidently doesn't work - try again or try using a different SD-Card
To you both. Try read through my troubleshooting guide maybe you'll find some help there if you're still stuck

Thanks for replies and link to your very extensive thread... I'm not through reading it, so maybe i missed something that can be helpful... In the mean time I had a very busy afternoon trying many RUUs. None of them worked except the latest one, the infamous gingerbread one... But not even that one worked fully... After multiple attempts I'm stuck now again on bootloader, and RUU install is incomplete... It fails at radio flash (it says fail-pu) and partition update fails ergo the whole update fails... Unfortunate thing is that the device is not S-OFF anymore... So if someone has some idea how to finish RUU update in some other way please point me in the right direction...

since it's failed on radio you might be totally screwed. Using gingerbread one was so stupid. Should've just made a goldcard and used a 2.2 WWE RUU

Yeah, well since none of the other RUU (tried many versions both wee and branded) installations didn't complete with goldcards (i tried with multiple sdcards) I tried with the gingerbread one and when that one failed I knew I'd have to send phone to support service... hope they will find some solution... I'm still very confused with situation because I'm not completely sure what went wrong... I presume that partition went to hell... :/
Anyways thanks for feedback

Related

Bricked Desire?! :(

Hey guys I'm really desperate right now...
I don't know what to to, I can't boot my Desire, I can't get into recovery, just fastboot is working. I'm always stuck on the splashscreen.
To begin with the story, I rooted my Desire months ago, flashed a new rom from time to time and everything worked fine. So yesterday I wanted to try out RCMix S CM7 where the FAQ said i need S-OFF.
So this also worked quite fine. But then I got problems partitioning my SDCard (dont know what why or so, my Desire didnt recognize it anymore)
Today I tried again but I made it even worse, now I can't boot my Rom anymore and I can't get into Recovery. So what should I do? I searched the internet for hours now and tried nearly everything.
I tried to flash an official RUU, in fact this one: RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Becaus the others were too "old". But when I tried starting this one it couldnt detect my desire. USB connecion error.
But still it seems it flashed a new hboot because now I am S-ON again.
Then I tried to flash a Stock ROM via fastboot, which first failed because it wasn't signed and the second one failed because android-info.txt and android-product.txt were missing.
I tried to flash the recovery again but it's still stuck on the splashcreen.
I don't know what to do anymore... could you PLS help me? Or is my Desire now bricked??
What can I do, or try...?
greets patrick
scroach said:
Hey guys I'm really desperate right now...
I don't know what to to, I can't boot my Desire, I can't get into recovery, just fastboot is working. I'm always stuck on the splashscreen.
To begin with the story, I rooted my Desire months ago, flashed a new rom from time to time and everything worked fine. So yesterday I wanted to try out RCMix S CM7 where the FAQ said i need S-OFF.
So this also worked quite fine. But then I got problems partitioning my SDCard (dont know what why or so, my Desire didnt recognize it anymore)
Today I tried again but I made it even worse, now I can't boot my Rom anymore and I can't get into Recovery. So what should I do? I searched the internet for hours now and tried nearly everything.
I tried to flash an official RUU, in fact this one: RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Becaus the others were too "old". But when I tried starting this one it couldnt detect my desire. USB connecion error.
But still it seems it flashed a new hboot because now I am S-ON again.
Then I tried to flash a Stock ROM via fastboot, which first failed because it wasn't signed and the second one failed because android-info.txt and android-product.txt were missing.
I tried to flash the recovery again but it's still stuck on the splashcreen.
I don't know what to do anymore... could you PLS help me? Or is my Desire now bricked??
What can I do, or try...?
greets patrick
Click to expand...
Click to collapse
If fastboot is working you should be pretty much safe. It seems like you got an usb brick. Try this thread: http://forum.xda-developers.com/showthread.php?t=691187
My Suggestion ... Create a Goldcard beofre doing anything.. once done you can put PB99IMG.zip into ur SD card and it will flash automatic once you goto fastboot... but Goldcard is a must for this.. if you dont knw search how to create goldcard.
For Goldcard
http://www.addictivetips.com/mobile...gold-card-for-htc-desire-without-hex-editing/
or
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
Pat, is your phone branded ?
Flash the correct RUU for your phone (one that came with your phone originally), it does not really matter how old it is. after you done that your should get back to stock you can re-root it and then load the firmware you want.
if you don't know what your phone came with originally. then you will need a goldcard to get back to stock
@paul.c: nope it isn't branded
@dennis.l: I can't! I tried some of this list: http://forum.xda-developers.com/showthread.php?t=695667
The old ones with 1.15 and 1.21 started, but didn't work because it said they are too old or something like that.
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4. 05.00.11_release_122704.exe
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
Then I tried the newer one with FroYo, but this one throw and error saying it can't even find or connect to my phone.
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So what I've read so far I definitely need a goldcard right?
But all those manuals say I have to boot up and activate USB Debugging Mode... but I cant boot up a rom. The only thing that is working right now is fastboot.
Is it possible to make a goldcard without booting up? Or do I have to get a working Desire to make the goldcard?
I haven't got a cardreader either but seems I've got to get one.
Right now I'm not at home so can just try it in the evening.
scroach said:
@paul.c: nope it isn't branded
@dennis.l: I can't! I tried some of this list: http://forum.xda-developers.com/showthread.php?t=695667
The old ones with 1.15 and 1.21 started, but didn't work because it said they are too old or something like that.
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4. 05.00.11_release_122704.exe
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
Then I tried the newer one with FroYo, but this one throw and error saying it can't even find or connect to my phone.
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So what I've read so far I definitely need a goldcard right?
But all those manuals say I have to boot up and activate USB Debugging Mode... but I cant boot up a rom. The only thing that is working right now is fastboot.
Is it possible to make a goldcard without booting up? Or do I have to get a working Desire to make the goldcard?
I haven't got a cardreader either but seems I've got to get one.
Right now I'm not at home so can just try it in the evening.
Click to expand...
Click to collapse
You don't need goldcard for unbranded phones.
Even Unbranded phone requires goldcard to be able to flash any RUU...
So I prefer you create goldcard.. and yehs you can create goldcard without booting..
If you have anyone with android mobile.. goto market and search for goldcard helper.. and insert you memory card in that phone.. and run the goldcard helper.. it will give you the reverse CID .. whcih you can use to create goldcard... but you will require a card reader for sure..... just try your luck with your current phone.. just plug in the phone and run the Goldcard tool.. and check if your phone is detecting
THANK YOU GUYS SO MUCH!!
You saved my life! xD
I made a goldcard as you said with the help of a friend and his desire. Then I put it my phone and suddenly I could flash the newest Stock ROM
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So everything went great, I've got root again, a working stock rom and I'm able to start recovery mode again.
THANK YOU VERY MUCH!
paul.c said:
You don't need goldcard for unbranded phones.
Click to expand...
Click to collapse
I'm glad to hear that. Sorry, it seems that I have to learn more.
scroach said:
THANK YOU GUYS SO MUCH!!
You saved my life! xD
I made a goldcard as you said with the help of a friend and his desire. Then I put it my phone and suddenly I could flash the newest Stock ROM
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So everything went great, I've got root again, a working stock rom and I'm able to start recovery mode again.
THANK YOU VERY MUCH!
Click to expand...
Click to collapse
Anytime Bro
I recently experienced a similar problem. And all the stuff you described wrong with your phone is the same on mine.
What I want to know is how to get back to stock and all that? A step by step guide would be very much apreciated..
I tried following this guide:http: //forum.xda-developers.com/showthread.php?t=691639
but as I try to enable my sdcard it get an error:
"The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem".
I recently installed the JDK and just downloaded the newest android SDK to work with.
Besides I'm considering whether I'm doing this right. I do have to use the CMDprompt right? and direct it to my androidsdk/tools directory?
I'm pretty much new to messing around with my phone through the CMD though. Please be gentle when you describe any methods that might work..?
Regards,
Me
Hammerbak said:
I recently experienced a similar problem. And all the stuff you described wrong with your phone is the same on mine.
What I want to know is how to get back to stock and all that? A step by step guide would be very much apreciated..
I tried following this guide:http: //forum.xda-developers.com/showthread.php?t=691639
but as I try to enable my sdcard it get an error:
"The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem".
I recently installed the JDK and just downloaded the newest android SDK to work with.
Besides I'm considering whether I'm doing this right. I do have to use the CMDprompt right? and direct it to my androidsdk/tools directory?
I'm pretty much new to messing around with my phone through the CMD though. Please be gentle when you describe any methods that might work..?
Regards,
Me
Click to expand...
Click to collapse
Adbwinapi.dll was moved to the platform-tools dir in the android sdk and the sdk path in Windows hasn't be updated. In win xp right click my computer, go to system then click the system variables button. Find "path" and change it to point in to the "platform-tools" folder... Note I'm not at my pc so I can't remember 100% what tab the system variables button is on
Sent from my HTC Desire using XDA Premium App
Hammerbak said:
I recently experienced a similar problem. And all the stuff you described wrong with your phone is the same on mine.
What I want to know is how to get back to stock and all that? A step by step guide would be very much apreciated..
I tried following this guide:http: //forum.xda-developers.com/showthread.php?t=691639
but as I try to enable my sdcard it get an error:
"The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem".
I recently installed the JDK and just downloaded the newest android SDK to work with.
Besides I'm considering whether I'm doing this right. I do have to use the CMDprompt right? and direct it to my androidsdk/tools directory?
I'm pretty much new to messing around with my phone through the CMD though. Please be gentle when you describe any methods that might work..?
Regards,
Me
Click to expand...
Click to collapse
Stumbled into the same problem. Just download it from the internet.
hi,
rage is right, better declare environnement variable, right click comupter - select properties - windows select advanced and you should see variable environnement. just add the path where adb is installed... mine is the following defaut path(C:\Program Files\Android\android-sdk-windows\tools) + (C:\Program Files\Android\android-sdk-windows\platform-tools) should add the in the user environ... name = path variable= the 2 path separated by a ;
Well I got desperate and I think that I've totally bricked my phone. I was going to a family arrangement and I didn't know the way so I was hoping that flashing the original RUU, would make me able to use the phone and the navigation in it, while starting the phone in fastboot would help. Seems it didn't. The RUU I tried to install seems it was a wrong one (here to say that I tried flashing it through the installer on my pc), but this was stated pretty late in the installation process.. where the guide told me to install a proper one.
My phone is now totally unresponsive. It won't even charge. When I hold the power button it just vibrates once and then nothing else happens.
Is it bricked? If so, does anyone know what my chances are with my warranty? Now that I've had it rooted and stuff, does my warrenty then expire and can they "track" the rooting part if I hand in it to their support?
Best of regards,
Me.
Hammerbak said:
Well I got desperate and I think that I've totally bricked my phone. I was going to a family arrangement and I didn't know the way so I was hoping that flashing the original RUU, would make me able to use the phone and the navigation in it, while starting the phone in fastboot would help. Seems it didn't. The RUU I tried to install seems it was a wrong one (here to say that I tried flashing it through the installer on my pc), but this was stated pretty late in the installation process.. where the guide told me to install a proper one.
My phone is now totally unresponsive. It won't even charge. When I hold the power button it just vibrates once and then nothing else happens.
Is it bricked? If so, does anyone know what my chances are with my warranty? Now that I've had it rooted and stuff, does my warrenty then expire and can they "track" the rooting part if I hand in it to their support?
Best of regards,
Me.
Click to expand...
Click to collapse
only guessing but if NOTHING turns on or boots, as in you just see a black screen then there is not going to be a way for any one to know the phone was rooted
try taking it back on warranty
I thought the same thing myself. Since it's unable to boot into the "recovery" menu by holding down "power + volume down" I guess it's not rooted anymore anyhow. During the RUU installation I noticed that it was installing a new "image-something" which I'm guessing means that it was writing over the root and recovery after which the installation failed.
Anyhow I'll try that and hope for the best. Thanks
Hammerbak said:
I thought the same thing myself. Since it's unable to boot into the "recovery" menu by holding down "power + volume down" I guess it's not rooted anymore anyhow. During the RUU installation I noticed that it was installing a new "image-something" which I'm guessing means that it was writing over the root and recovery after which the installation failed.
Anyhow I'll try that and hope for the best. Thanks
Click to expand...
Click to collapse
Are you able to recognise the phone in adb at all?
From what I know it's very rare to completely brick unless you are flashing hboots or radios.

Help - Desire stuck on boot

Has anyone ever seen this? Got this phone cheap and would like to fix it.
Can't get into bootloader, just goes to this screen and keeps rebooting ever so often.
Cheers for any help
Ok an update, it seems the volume- button is broken but back key + power worked and I got into the boot menu. Here's a pic.
Where should I go from here?
Is there a way of knowing if the phone is branded and what brand or unlocked so I can try flashing a WWE RUU?
Ok so the phone is branded T Mobile since a Tmob RUU worked just fine but with WWE ROMs I get a CID mismatch.
Made a goldcard with 2 sd cards but it doesn't work since I get a CID error mismatch again.
I should mention that after a T Mobile RUU flash that phone was still getting stuck on that same screen in post 1.
I've tried several things but still no luck with getting anywhere.
Thoughts?
EDIT: Made a successful goldcard using a different method and was able to flash the latest WWE RUU but the phone is still stuck on boot, the difference is that now it's the white screen with HTC in the middle.
So the phone doesn't even get into boot.
Can somebody help me with this??
Ruu really should Fix it. If it doesn't, first port of call should be warranty. Does ruu give no error?
Sent from my HTC Desire using Tapatalk
As I've mentioned, I got this phone for cheap so no warranty.
Nope, no errors with goldcard. Also I should mention I can't get into recovery, it just goes back into boot loop.
I suspect some partition somewhere must be corrupted.
If the phone had S-OFF it would make things so much easier.
Ok so an update, for anyone who runs into this problem.
After trying basically everything (even trying to unlock bootloader with a HTC Unlocker device with no success, probably due to action key not working) I was going to go and try to unlock the official way.
To unlock the official way I had to update the ROM so I just used the latest update which is 2.3.3 and after flashing I was finally able to boot!! So it seems like the problem was not hardware related at all.
Next I used Revolutionary to S-OFF, flashed CWM Touch and used root.zip for root access. Now I'm happy I got it all going and it's time for a sandwich, the ice cream variant
Peace!

[Q] Phone stuck in bootscreen, no answer in troubleshoot

After breaking my previous desire i got a new one from insurance past friday. I s-off and rooted it with revolutionary and ran the alpharev cm7 r2 partition table. All went fine and i installed the CM 7.2 RC rom and started downloading all my apps and stuff.
All seemed fine untill i shutdown my phone last night and when booting it up this morning it doesn't boot up into anything. I can only get into Hboot and fastboot. I've tried booting into recovery but it gets stuck on the boot screen again.
Now i've read the Q&A troubleshooter posted above here and i have already tried reflashing recovery, which sadly still didn't boot after the reflash.
Now i'm completely stuck on what to do and have been searching for over an hour now.
I've read i could do a RUU for my phone, but seeing as alpharev has protection against that i'm not certain that would even help. What would be the best solution here to get my phone working again. (and if possible with the current data on it , i hadn't made a backup of the full install yet)
Edit: some extra info
Hboot 6.93.1002
Bravo PVT3 S-off
radio 5.11.05.27
CM 7.2 RC
clockwork, not sure newest version for desire afaik
Did you try to remove battery?
yes, seeing as that is the only option right now to turn my phone off .
I also ran fastboot oem gencheckpt to force boot into recovery. The phone got stuck at htc splashscreen. I posted the cmd image information in this post.
when i pulled the battery to shut down the phone, the cmd gave and "error, to many links"
edit:
i ran the alpharev downgrade image to overwrite my hboot and see if i could get into recovery after reflashing that aswell. Sadly this didn't work and after flashing both it still gets stuck at the htc splash screen
i ran the downgrade hboot again and will not try to fix it with a RUU
hmm, the phone is still recognized by the pc, but i have a black screen and can't get it to display anything. did i use a bad ruu or? I"m really confused now :|
after looking in the troubleshoot again i tried to flash the bravo stock from alpha rev, but i'm getting a FAILED <remote: signature verify fail>
well seeing as i most likelly need a goldcard now and don't have another android device laying around i will have to continue this tomorrow or tonight.
if ANYBODY has any advice everything is really appriciated!
what RUU did you flash?
if it was under 2.xx that means you did slcd brick have look here
flash bravo stock from alpharev, then run (if you have a goldcard) the 2.2 WWE RUU, or your carriers RUU (make sure it's the latest one)
Check shipped-roms.com
i think i ran this RUU
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865.exe
which i got from this post, which i now see is terribly out-dated xD.
I got my phone from vodafone in Holland, and i just saw an RUU for bravo that was shipped by vodafone UK which also supports the same radio as mine. Is it a safe bet to use that one for the recovery process?
I wasn't able to run any images right now from fastboot for some reason so i will indeed need to make a goldcard. Will do so tomorrow and report back if i've had any succes.
Thanks for the advise!
OK, so i'm a bit confused by that guide i'm afraid...
I've noticed that in step 4 that i'm unable to enter recovery (no surprise seeing as i was unable before the RUU).
I can boot in to fastboot and hboot i think seeing as i get the "device connected sound" in windows. When i then enter ADB devices or fastboot oem gencheckpt it gives me some information, which can be seen in the screenshot.
What i'm now confused about is, do i still need to make a goldcard, and if so how? I tried running that goldcard creater software but it couldn't pull a CID. Should i create a goldcard by just using a phone of my friend (desire s :|)? Or is it possible to just run the right RUU straight away seeing as i can connect to hboot and fastboot, let that run and when that is finished use revolutionary to root my phone agian.
Attached is the cmd for fastboot oem gencheckpt and adb devices, although normally the fastboot oem gencheckpt finished with a "FAILED <status read failed<too many links>>
Gimme bootloader information, also what state is the phone in now, and what have you tried so far. (quick summary)
My bad just read you last posts.
Try the Vodafone RUU, it should work, don't see why it shouldn't. If that fails, make a goldcard with your friends Desire S, and flash the 2.2 WWE RUU.
If that fails then use the 2.3 RUU.
Ah great!!! I ran the vodafone ruu and atleast now i'm getting fastboot and hboot displayed again.
I'll see how far i can get on my own now. Thanks alot for all your help
Darn, aren't there yet...
I can now get into fastboot and hboot WITH it being displayed so that is already a big plus. However i'm still on a off partition format so i need to flash that back to the original partition format.
I'm S-ON right now so i can't do it through fastboot.
So i made the goldcard through my friends phone and place a PB99IMG.zip containing the alpharev bravostock on the goldcard.
When i then boot into HBOOT it gives me the reading PB99IMG.zip but doesn't give me an option to run the update afterwards. I then checked with the RUU i ran from my pc and created an PB99IMG.zip of that and let it run from HBOOT thus checking if the goldcard was functional. This worked perfectly apart from the partition table being screwed.
How can i now either install recovery from my goldcard while being S-ON or how can i succesfully run the bravo_stock image from my goldcard?
edit: I know i could use the old s-off trick from alpharev but i would prefer to use revolutionary instead seeing as it's more up to date...
k i think i know what to do.
i'll just create a bootable USB with the 1.8 hboot from alpharev on it. S-off my device and restore the partitions to stock.
Then run the RUU again so that my phone returns to stock sense and S-on.
After that i should be the basic root process all over again by running revolutionary etc right?
If you're S-ON. You DO NOT need to touch the hboot, and you can't anyway.
If you've got a goldcard just try the WWE RUU. And if that doesn't fix it then the 2.3 RUU.
That's all you need to do. NOTHING else.
The 2.3 RUU (the vodafone one i downloaded) doesn't work.
I don't think any RUU will work for my seeing as i'm still on the CM 7 r2 partition layout instead of the original sense layout (a little mistake i made when running the first faulty RUU). I'll try to run the WWE RUU first, but i don't think it'll achieve anything.
If i would now run the alpharev 1.8 hboot from a bootable USB it shouldn't put my device at risk right? :|
Edit:
i'm actually getting CID incorrect from the WWE RUU from the troubleshoot thread and from another WWE RUU i downloaded from shipped-roms.com
edit2:
alright, i tried 2 WWE RUUs, which when ran from my PC give me ERROR[131]: customer-ID error and a CID incorrect when done from my goldcard... i also tried alpharev hboot 1.8 but that didn't work either for the obvious reason that you need to boot into android and enable usb debugging and the WWE RUUs for i do not know what reason .
Damn i thought i had figured it out before going to college but aparently i was wrong >.<
i don't know if it's relevant but when i try to boot normally i get the HTC splash screen and it vibrates 7 times in a row...
So i think my goldcard might not be as golden as it should be. Should i try it with my other microSD, the one that i actually use in my phone, an 16 gb kingston?
If so can i use the same goldcard.img or should i create a new one?
bortak said:
If you're S-ON. You DO NOT need to touch the hboot, and you can't anyway.
If you've got a goldcard just try the WWE RUU. And if that doesn't fix it then the 2.3 RUU.
That's all you need to do. NOTHING else.
Click to expand...
Click to collapse
Dear god how many times do I just need to repeat myself.
Just download http://www.htcdev.com/process/legal_download/152 , boot into fastboot mode, then run RUU.exe
There is no vodafone 2.3 RUU, there is only one, and it is unbranded.
Elightos said:
So i think my goldcard might not be as golden as it should be. Should i try it with my other microSD, the one that i actually use in my phone, an 16 gb kingston?
If so can i use the same goldcard.img or should i create a new one?
Click to expand...
Click to collapse
If you still get CID error - you do not have a goldcard. Simple as that.
Elightos said:
The 2.3 RUU (the vodafone one i downloaded) doesn't work.
Click to expand...
Click to collapse
The 2.3 RUU always does something, if not for better than for worse.
ah right i'm sorry, i was a bit confused about that ruu because of some of the information displayed on shipped-rom.com. Prolly read it wrong or something.
Anyway the 2.3 RUU did indeed fix it! quite surprised after all this really didn't expect it! Thanks out a load and i'm sorry for touching a nerve there, it's just the first time doing anything like this so it was all a tad bit confusing!
Elightos said:
ah right i'm sorry, i was a bit confused about that ruu because of some of the information displayed on shipped-rom.com. Prolly read it wrong or something.
Anyway the 2.3 RUU did indeed fix it! quite surprised after all this really didn't expect it! Thanks out a load and i'm sorry for touching a nerve there, it's just the first time doing anything like this so it was all a tad bit confusing!
Click to expand...
Click to collapse
Lol don't worry about it, everyone starts of a newb I remember posting some scare stories of mine a while back of when I first started messing with my phone

[Q] Desire HD in bootloop obscure problem

Hello all!
I may be new to XDA, but i lurk a lot... And over the years this is the first time i've ever needed to post.
Right.. So today i bought an "HTC Desire HD" or 'Ace'
It was on Froyo (2.1?) S-ON and hboot 0.85 or something
I tried using AAHK - Which is fine, I've used it before successfully on my other DHD.
This time it was upgrading/downgrading a radio, error'd and quit.
It then restarted and bootloooped.
I tried Factory Restore did nothing
I then tried using many and various RUU's but i always get Error 131 or Error 190
I tried making a GoldCard to boot the phone still nothing
I also tried the PD98IMG.zip in the SD card (Tried with GoldCard too) Still Error 131
GoldCard does work as have tested it on another phone.
Currently sat staring at HBOOT wondering what the hell i can do to get it too switch back on!
The phone is locked to Orange UK with S-ON
The file that i believe to fix my phone is called "RUU-Ace-Orange-UK.18" something, but it just doesn't exist. I've searched all of google and only found dead links.
Just a little motivation, I'll donate to whom ever provides the fix for my phone my old Xperia Mini e10i! Thanks
AAHK is retired, and the server hosting the files it needs has been pulled. Without S-Off you can't flash radios. Are you just trying to root? If so, you can unlock your bootloader, flash a recovery, and flash a rooted ROM from there. You can't flash radios, but you can flash custom ROMs. The link in my signature has more detailed guides.
EDIT: but you will first need to update your hboot.
bananagranola said:
AAHK is retired, and the server hosting the files it needs has been pulled. Without S-Off you can't flash radios. Are you just trying to root? If so, you can unlock your bootloader, flash a recovery, and flash a rooted ROM from there. You can't flash radios, but you can flash custom ROMs. The link in my signature has more detailed guides.
EDIT: but you will first need to update your hboot.
Click to expand...
Click to collapse
Please link me to hboot update, I've looked around but all links give me "downloadmanagerS.exe" :/
EDIT: I found the file for RUU Ace Orange UK (My phone is on Orange), but it's not finding my phone. And when i took the ROM out of it, and put onto simcard it's giving me an Incorrect Model ID
I believe that because your hboot is too old, you need to create a gold card to flash a RUU that supports hboot unlock. How to do that is beyond the scope of my knowledge, and due to the fact that the guy who used to handle all this stuff (glevitan) is no longer active here, you may just need to hope someone else shows up. You could try to look through his posts for that info.
bananagranola said:
I believe that because your hboot is too old, you need to create a gold card to flash a RUU that supports hboot unlock. How to do that is beyond the scope of my knowledge, and due to the fact that the guy who used to handle all this stuff (glevitan) is no longer active here, you may just need to hope someone else shows up. You could try to look through his posts for that info.
Click to expand...
Click to collapse
So my phone is dead then D;
Basically you need to create a Goldcard and upgrade your bootloader.
I also have a Orange DHD and i am S-Off'd using another methord but the difference is that i have sense 3.0.
But due to your phones CID being ORANG001 you'll need the goldcard as there is no orange RUU firmware only HTC generic firmware.
Shot a PM if you still need help.

[Q] Returning to Stock

Hi all. Have not been to this site in a while.
I have an 8181 Desire (Australia - Telstra). Presently running CM7 and Runnymede ROM, with 4EXT recovery.
Before I go too far...yes, I know I should use SEARCH, but honestly I have forgotten so much about modding, I really have no idea what I'm doing anymore...
I want to return to stock and pass the phone on to a friend. I have so far installed Telstra RUU to my PC and I have run Alpharev downgrade. I have now moved to reboot and run the RUU, but I keep booting straight to Bootloader screen, not progressing to main screen. I know this means I have missed a step or forgotten something, but have nfi what that might have been.
I never really learned to flash with Fastboot, so am I able to avoid that and continue the way I am a little more familiar with?
Thanks heaps for any help. In the meantime I will continue to SEARCH and see what I can see. Cheers.
Use the troubleshooting guide stickied to the top of q&a
Search for and then run the 2.3.3 GB RUU
I've found the 2.3.3 GB Telstra RUU and renamed to PB99IMG.zip, placed on SD card. I see a blue progress bar and then "would you like to reboot now?" Each time I reboot, I am straight back to Bootloader screen (not stuck in bootloop, as such).
Working my way thru the TS Guide, but I'm pretty sure I have missed a step or forgotten something along the way... Wondering if phone won't boot properly because I am now running the Downgrade HBoot, which is obviously not compatible with Runnymede.
Am I able to uninstall 4EXT touch? Would like to simplify things as much as I can and would be happy with standard CWM for flashing purposes...
Will keep playing today. I know the phone isn't bricked, so I'm not panicking. Yet.
Try flashing the stock hboot, then RUU
Currently if only flashed the downgrade.img, it's just in a blank state with no actual hboot I believe.
(Make sure you're flashing these hboots thru fastboot, not recovery)
777ace said:
I've found the 2.3.3 GB Telstra RUU and renamed to PB99IMG.zip, placed on SD card. I see a blue progress bar and then "would you like to reboot now?" Each time I reboot, I am straight back to Bootloader screen (not stuck in bootloop, as such).
Working my way thru the TS Guide, but I'm pretty sure I have missed a step or forgotten something along the way... Wondering if phone won't boot properly because I am now running the Downgrade HBoot, which is obviously not compatible with Runnymede.
Am I able to uninstall 4EXT touch? Would like to simplify things as much as I can and would be happy with standard CWM for flashing purposes...
Will keep playing today. I know the phone isn't bricked, so I'm not panicking. Yet.
Click to expand...
Click to collapse
Dont rename the ruu to PB99IMG... It wont work as u found out. So.... On ur pc, run the ruu.exe file that u downloaded, then (if using windows) when it gets to the screen with pic of phone asking to axcept stuff, click start on ur computer, then in search box type "run" then click on run then in that search box type %temp% and search then find the first or second newest folder there will be a file there called rom.zip... Rename that to PB99IMG then put it on the root of ur sdcard and boot into bootloader
---------- Post added at 02:24 AM ---------- Previous post was at 02:22 AM ----------
eddiehk6 said:
Try flashing the stock hboot, then RUU
Currently if only flashed the downgrade.img, it's just in a blank state with no actual hboot I believe.
(Make sure you're flashing these hboots thru fastboot, not recovery)
Click to expand...
Click to collapse
I was typing as u were posting
jmcclue said:
Dont rename the ruu to PB99IMG... It wont work as u found out. So.... On ur pc, run the ruu.exe file that u downloaded, then (if using windows) when it gets to the screen with pic of phone asking to axcept stuff, click start on ur computer, then in search box type "run" then click on run then in that search box type %temp% and search then find the first or second newest folder there will be a file there called rom.zip... Rename that to PB99IMG then put it on the root of ur sdcard and boot into bootloader
---------- Post added at 02:24 AM ---------- Previous post was at 02:22 AM ----------
I was typing as u were posting
Click to expand...
Click to collapse
Nice! Thank you!! I was following the TS Guide and couldn't figure why I couldn't find that rom.zip file... Now I get it.
A bit busy for a while, but will try again as soon as I get home and report back.
Cheers.
777ace said:
Nice! Thank you!! I was following the TS Guide and couldn't figure why I couldn't find that rom.zip file... Now I get it.
A bit busy for a while, but will try again as soon as I get home and report back.
Cheers.
Click to expand...
Click to collapse
If u get stuck just google search "how to extract rom.zip from ruu xda" im sure ul get a few guides.
Well, as it happened, impatience got the better of me and I did find the rom.zip and placed onto SD. Update worked fine, but now stuck at Telstra splash screen.
I really do have to head out, but I'll check back again later on.
Would having the SD card partitioned to SD-Ext/FAT32 effect the operation??
Thanks again for the help, feeling like a real n00b here!
Partition won't affect it. RUU doesn't see or care about it
Have you flashed stock hboot yet? It should say alpharev stock in the top of the bootloader screen.
If that RUU won't work, find the 2.3.3 WWE GB RUU
I have --- AlphaRev --- at top of screen. Definitely have flashed stock HBoot.
Just flashing WWE RUU now. I notice in the tutes I've found I should be seeing
Parsing...[SD ZIP]
[1]Bootloader - OK
[2]Radio_V2 - OK
[3] Radio_Cust - OK
etc...
I have the "OK" on all points except the [1] Bootloader, which has "Bypassed" after it...
WWE RUU now flashed, rebooted and still stuck at splash. Trying to recall if I had flashed a custom Kernel to this phone, back when I was using/playing with it. Blah, too many variables! Should have returned to stock two years ago!!
Still stuck at splash...and speaking of splash, phone might need to take a dip my swimming pool, I think.........................
777ace said:
I have --- AlphaRev --- at top of screen. Definitely have flashed stock HBoot.
Just flashing WWE RUU now. I notice in the tutes I've found I should be seeing
Parsing...[SD ZIP]
[1]Bootloader - OK
[2]Radio_V2 - OK
[3] Radio_Cust - OK
etc...
I have the "OK" on all points except the [1] Bootloader, which has "Bypassed" after it...
WWE RUU now flashed, rebooted and still stuck at splash. Trying to recall if I had flashed a custom Kernel to this phone, back when I was using/playing with it. Blah, too many variables! Should have returned to stock two years ago!!
Still stuck at splash...and speaking of splash, phone might need to take a dip my swimming pool, I think.........................
Click to expand...
Click to collapse
Not sure why it's skipping the bootloader part.
Custom kernel doesn't make a difference either. Everything except your sd card gets wiped when you run an RUU.
I had a read of the troubleshooting guide again, Part 8, it said to flash the downgrader, then RUU, sorry for my bad advice. Try that.
Else try runnnig the 2.3.3 RUU using PB99IMG.zip method in the same guide.
You should eventually be able to get it to boot. You don't have the RadioV2 fail which is a good thing
eddiehk6 said:
Not sure why it's skipping the bootloader part.
Custom kernel doesn't make a difference either. Everything except your sd card gets wiped when you run an RUU.
I had a read of the troubleshooting guide again, Part 8, it said to flash the downgrader, then RUU, sorry for my bad advice. Try that.
Else try runnnig the 2.3.3 RUU using PB99IMG.zip method in the same guide.
You should eventually be able to get it to boot. You don't have the RadioV2 fail which is a good thing
Click to expand...
Click to collapse
Well, I am now S-On, so progress is occurring... Also back to 0.75 HBoot.
Still booting straight to Fastboot though. For sh.ts and giggles, I just attempted to enter Recovery, but got the dreaded red triangle. All good, phone does still boot, just not in the way I want...
Anyhoo, still ticking away. Am relearning a heap of stuff. Maybe I could re-root and S-Off again, once I get this sorted??
777ace said:
Well, I am now S-On, so progress is occurring... Also back to 0.75 HBoot.
Still booting straight to Fastboot though. For sh.ts and giggles, I just attempted to enter Recovery, but got the dreaded red triangle. All good, phone does still boot, just not in the way I want...
Anyhoo, still ticking away. Am relearning a heap of stuff. Maybe I could re-root and S-Off again, once I get this sorted??
Click to expand...
Click to collapse
You can't enter recovery because the custom recovery gets overwritten by RUU as well. Like I said, everything should go back to stock.
Try the 2.3.3. GB RUU (I assume you used the Telus one as you only have 0.75 hboot?), get it booting first before trying anything else.
The latest RUU should have 1.02 hboot, at which point you could s-off with revolutionary as it's only compatible with 0.93 or 1.02 hboot as far as I know..
My suggestion of trying to enter recovery, or re-rooting was just me playing silly buggers. I swear once this thing is sorted, I am never touching it again!!
So I just tried to re-flash the Telstra RUU and got message "Main Version is older! Update Fail!". Probably due to the 0.75 HBoot, I am guessing. Would like to find a copy of Telstra FroYo RUU and see if that works. If it does get things moving, I could then OTA update once full-boot has been achieved.
Still pretty sure I missed a step somewhere... I did full wipe before starting (cache/dalvic, system, data, SD-Ext), but not factory reset. As I said, am now back to S-On, but I assume I am still rooted, so starting to think I should go back, gain S-Off, CWM and start all over again.
You people must be about ready to reach thru your monitor and choke me! Lol!!
777ace said:
My suggestion of trying to enter recovery, or re-rooting was just me playing silly buggers. I swear once this thing is sorted, I am never touching it again!!
So I just tried to re-flash the Telstra RUU and got message "Main Version is older! Update Fail!". Probably due to the 0.75 HBoot, I am guessing. Would like to find a copy of Telstra FroYo RUU and see if that works. If it does get things moving, I could then OTA update once full-boot has been achieved.
Still pretty sure I missed a step somewhere... I did full wipe before starting (cache/dalvic, system, data, SD-Ext), but not factory reset. As I said, am now back to S-On, but I assume I am still rooted, so starting to think I should go back, gain S-Off, CWM and start all over again.
You people must be about ready to reach thru your monitor and choke me! Lol!!
Click to expand...
Click to collapse
- Please use the 2.3.3 WWE RUU...
- Ignore anything and everything to do with Telstra...
- You are not rooted. You have run an RUU but it's not booting. This has overwritten everything, so your factory reset was unnecessary...
eddiehk6 said:
- Please use the 2.3.3 WWE RUU...
- Ignore anything and everything to do with Telstra...
- You are not rooted. You have run an RUU but it's not booting. This has overwritten everything, so your factory reset was unnecessary...
Click to expand...
Click to collapse
Yep, that's what I'm experiencing.
I have flashed RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704 from here previously, but still had the boot issues when I ran it.
Gave it another try just now, but now have message "Model ID incorrect! Update Fail!"
- That is not the 2.3.3 GB RUU, I think it's an ancient Eclair RUU, yes android 2.1....
- If you can't find the 2.3.3 GB RUU, at least try the Froyo RUU from that thread, version 2.29.405.5 I think. This should give you hboot 0.93 which revolutionary also works on.
http://www.htcdev.com/process/legal_download/152
Or do it the PB99IMG method
http://d-h.st/d44
KA-CHING!!
I swear, if I could hit the THANKS button a million times, I would do so in a heart beat. Using mcclue's PB99IMG link, phone is now up and running like new!
But the thanks must also go eddiehk, for your patience and taking the time to check back each day to see how I am going. I swear I had no idea that RUU was Eclair/2.1... Just ASSUMED the updates were still relevant. Was getting close to just "Meh!" and tossing it in the trash.
So, going forward from here, is it worth me checking for OTA updates to bring the phone back completely to stock (Telstra) specs...or just leave it alone??
Anyway, again a million thanks to you guys for your help. Very much appreciated!! :good::good::good::good:
777ace said:
KA-CHING!!
I swear, if I could hit the THANKS button a million times, I would do so in a heart beat. Using mcclue's PB99IMG link, phone is now up and running like new!
But the thanks must also go eddiehk, for your patience and taking the time to check back each day to see how I am going. I swear I had no idea that RUU was Eclair/2.1... Just ASSUMED the updates were still relevant. Was getting close to just "Meh!" and tossing it in the trash.
So, going forward from here, is it worth me checking for OTA updates to bring the phone back completely to stock (Telstra) specs...or just leave it alone??
Anyway, again a million thanks to you guys for your help. Very much appreciated!! :good::good::good::good:
Click to expand...
Click to collapse
The 2.3 gb upgrade is the latest for this phone so just leave it as is. And if u want custom roms again, use revolutionary to s-off.

Categories

Resources