Develop Bugs

[30/7/2011][Guide How To]Pass ChevronWP7 from 7004 to 7712 MangoB2 via zune, by ansar

Dear forum members,
Update on 21/9/2011
>> For the fastest and most reliable way to update hTC devices to Mango 7720 RTM see also my new threads:
>> [NEWS]Custom ROMs and xap 2 Update 2 Mango 7720 RTM for hTC 7 Phones by ansar
>> [XAP]Update to Mango 7720 RTM with any Stock and Custom ROM provided by ansar
Update on 30/7/2011
1. Guide updated to include both hTC and Samsung devices [Omnia 7 is used as a reference name]
2. Guide updated due to MS Release of ISV Beta 7403 and 7712 for MangoB2
3. All required files are included in the following 2 zip files:
3.1 NoDo_Public_by_ansar
3.2 MangoB2_Public_Trial_by_ansar
4. Backup is working in MangoB2
5. Required Windows Phone 7 Backup V1.2 and V1.4 are not included in above (3) zip files
6. An important note [NB] is added in my post #268, read it carefully
7. Users already updated and unlocked to MangoB2 7661 can proceed directly to ISV Beta 7712 update via zune and stay unlocked
If you do not have already update to OS 7392 [NoDo], you must 1st update using this Guide:
NoDo Update Guide: How To Pass ChevronWP7 from OS 7004 to OS February 2011 update and 7392 NoDo
that can be found in section [A.] bellow
If you already have update to OS 7392 [NoDo] using Guide [A.] then you can update to MangoB2 OS using the following Guide:
B. MangoB2 Update Guide: How To Pass ChevronWP7 from OS 7392 [NoDo] to OS 7403 and 7712
MangoB2 Prerequisites:
1. Download in your Laptop this file: Mangob2_Public_Trial_by_ansar.zip
2. Extract Mangob2_Public_Trial_by_ansar.zip using unzip /7zip to a folder and in your Laptop will have the following:
- folders
-- x64
-- x86
- files
-- msvcr90.dll
-- Setup-UpdateWP-x64.exe
-- Setup-UpdateWP-x86.exe
-- StartZuneLocal.exe
-- Unlock_Mango_XBMODDeployer.xap
-- Unlock_Mango.xml
-- Update_Mango_XBMODDeployer.xap
-- Update_Mango.xml
-- Wp7UsbStorageEnabler.exe
- On Laptop:
3. Install zune update by double clicking on StartZuneLocal.exe
-- Follow the on screen instructions, wait for update to complete and exit zune update
4. Run Application Deployment, click on browse
--- for hTC phones, click on TouchXplorer.xap
--- for Omnia 7, click on WP7RootTools 0.5 alpha.xap
-- and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy and
-- wait for Status is XAP deployment complete
5. Take a backup of 7392 [NoDo] unlocked device
5.1 Double click on WPSupportTool-x86.msi / WPSupportTool-amd64.msi and then click on uninstall
5.2 Double click on Setup-UpdateWP-x86.exe / Setup-UpdateWP-x64.exe and then click on install
5.3 Download Windows Phone 7 BackupV1.4
5.4 Create backup
End of MangoB2 Prerequisites
Start of MangoB2 1st phase
For hTC devices:
- On Laptop:
-- in Application Deployment, click on browse, click on Update_Mango_XBMODDeployer.xap and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy and
-- wait for Status is XAP deployment complete
- On windows phone:
-- tap on top right arrow
-- find and tap on XBMOD.Files.Deployer
-- tap on bottom left arrow to exit XBMOD.Files.Deployer
-- tap and hold on XBMOD.Files.Deployer, tap on uninstall and then tap on yes
-- tap on TouchXplorer
-- in My Device screen double tap on My Documents
-- in My Documents screen double tap on My Ringtones
-- in My Ringtones tap on CustClear.provxml
-- in My Ringtones tap on bottom right ...
-- in ... screen tap on copy
-- in My Ringtones tap on bottom left arrow to return in My Documents
-- in My documents tap on bottom left arrow to return in My Device
-- in My Device screen find and double tap on Windows and wait to appear
-- in Windows screen tap on bottom right ...
-- in ... screen tap on paste
-- tap on bottom left arrow to exit Windows
-- tap on bottom left arrow to exit TouchXplorer
-- find and tap on Connection Setup
-- in SETTINGS screen of Connection Setup tap on tick (circled v)
-- wait for done to appear and tap on to exit Connection Setup
For Samsung devices:
- On Laptop:
-- disconnect Omnia 7 from usb cable
-- run zune
-- connect Omnia 7 usb cable to Laptop and wait for sync to complete
-- double, click on Wp7UsbStorageEnabler.exe and click on Enable
-- close zune
-- browse in folder of Update_Mango.xml right click on it and select copy
-- in windows explorer click on SAMSUNG OMNIA device and click on Storage folder in right window pane
-- right click on Storage and select paste
-- in Wp7UsbStorageEnabler click on Disable and then click on Quit
- On windows phone:
-- verify that is not in screen locked or in sleep mode
-- tap on top right arrow
-- find and tap on WP7RootTools
-- scroll up welcome screen and tap on continue
-- tap on circled + and create provxml folder
-- scroll registry screen left and tap on My Documents
-- in My Documents screen tap on Zune
-- in Zune screen tap on Content
-- in Content screen tap on 0400 folder
-- in 0400 screen tap on 00 folder
-- in 00 screen tap and hold on 0x.z file and tap on cut
-- tap on bottom left arrow until Explorer screen appears
-- tap on provxml folder to open it
-- tap on middle paste button
-- tap and hold on 06.z file, tap on rename and set as Update_Mango.xml and tap on save
-- tap on bottom left button up to exit WP7RootTools
-- tap on Phone app and from keyboard enter ##634# to run Diagnosis app
-- from Diagnosis app keyboard enter *#9908# to run GPRS Manager
-- in GPRS Manager tap on Select GPRS bar to enter relevant file list
-- tap on Update_Mango and then on save
-- after loading ... massage is displayed tap on close to exit GPRS Manager
-- tap on bottom left arrow to exit Diagnosis app
-- tap on bottom left arrow up to exit Phone app
For all devices:
- On Laptop:
-- click on zune View Sync Options
-- click on zune Update option
-- wait for zune An update is available screen to appear and click on UPDATE
-- wait for zune update your phone black screen to appear with available 7403 update
-- in zune update your phone black screen click on UPDATENOW
-- wait for zune update in progress 9 steps to complete
-- when zune new update available screen appears click on CLOSE
- On windows phone:
-- enter SIM pin when prompted
-- in An update is available screen tap on close
-- tap on right top arrow
-- find and tap on Settings
-- find and tap on about and then on more info to verify the OS 7403 update
-- tap on bottom left arrow to exit about
-- tap on bottom left arrow to exit SETTINGS screen
-- tap on TouchXplorer or Advanced Config to verify that is working
-- tap on bottom left arrow to exit TouchXplorere or Advanced Config
End of MangoB2 1st phase
It is recommended to take a backup of MangoB2 1st phase for future use
Start of MangoB2 2nd phase
For hTC devices:
- On Laptop:
-- in Application Deployment, click on browse, click on Unlock_Mango_XBMODDeployer.xap and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy
-- wait for Status is XAP deployment complete
-- click on x button to exit Application Deployment
- On windows phone:
-- tap on top right arrow
-- find and tap on XBMOD.Files.Deployer
-- tap on bottom left arrow to exit XBMOD.Files.Deployer
-- tap and hold on XBMOD.Files.Deployer, tap on uninstall and tap on yes
-- tap on TouchXplorer
-- in My Device double tap on My Documents
-- in My Documents double tap on My Ringtones
-- in My Ringtones tap on CustClear.provxml
-- in My Ringtones tap on bottom right ...
-- in ... screen find and tap on copy
-- in My Ringtones tap on bottom left arrow to return in My Documents
-- in My Documents tap on bottom left arrow to return in My Device
-- in My Device find and double tap on Windows and wait to appear
-- in Windows tap on bottom right ...
-- in ... screen find and tap on paste and then tap on ok
-- in Windows tap on bottom left to exit Windows
-- tap on bottom left arrow to exit TouchXplorer
For Samsung devices:
- On Laptop:
-- disconnect Omnia 7 from usb cable
-- run zune
-- connect Omnia 7 usb cable to Laptop and wait to sync to complete
-- double, click on Wp7UsbStorageEnabler.exe and click on Enable
-- close zune
-- browse in folder of Update_Mango.xml right click on it and select copy
-- in windows explorer click on SAMSUNG OMNIA device and click on Storage folder in right window pane
-- right click on Storage and select paste
-- in Wp7UsbStorageEnabler click on Disable and then click on Quit
- On windows phone:
-- verify that is not in screen locked or in sleep mode
-- tap on top right arrow
-- find and tap on WP7 Root Tools
-- scroll Registry screen left and tap on My Documents
-- in My Documents screen tap on Zune
-- in Zune screen tap on Content
-- in Content screen tap on 0400 folder
-- in 0400 screen tap on 00 folder
-- in 00 screen tap and hold on 0x.z file and tap on cut
-- tap on bottom left arrow until Explorer screen appears
-- tap on provxml folder to open it
-- tap on middle paste button
-- tap and hold on 0x.z file, tap on rename and set as Unlock_Mango.xml and tap on save
-- tap on bottom left button up to exit WP7 Root Tools
For all devices:
- On Laptop:
-- click in zune View Sync Options
-- click in zune UPDATE option
-- wait for An update is available screen to appear and click on UPDATE
-- wait for zune update your phone black screen to appear with available 7712 update
-- in zune update your phone black screen click on UPDATENOW
-- wait for zune update in progress 9 steps to complete
-- when zune successful update screen appears click on FINISH
- On windows phone:
-- enter SIM pin when prompted
-- tap on close
-- tap on top right arrow
For hTC devices:
-- find and tap on Connection Setup
-- in SETTINGS screen of Connection Setup tap on tick (circled v)
-- wait for done to appear and tap on it to exit Connection Setup
-- find and tap on Settings
-- find and tap on about and then on more info to verify the OS 7712 update
-- tap on bottom left arrow to exit about
-- tap on bottom left arrow to exit SETTINGS
-- tap on TouchXplorer to verify that is working
-- None version up to AdvancedConfig.1.2.0.0.beta is working
-- RegistryEditor.1.1.0.0 is booting but all 4 options return to initial screen
For Samsung devices:
-- tap on Diagnosis app
-- from Diagnosis app keyboard enter *#9908# to run GPRS Manager
-- in GPRS Manager tap on Select GPRS bar to enter relevant file list
-- tap on Unlock_Mango and then on save
-- after loading ... massage is displayed tap on close to exit GPRS Manager
-- tap on bottom left arrow to exit Diagnosis app
-- tap on bottom left arrow up to exit Phone app
-- tap on Samsung Tools to verify that is working
-- tap on WP7 Root Tools to verify that is not booting
End of MangoB2 2nd phase
It is recommended to take a backup of MangoB2 2nd phase for future use
Congratulations, you have a MangoB2 OS 7712 updated and unlocked windows phone
Till next version enjoy XAPping!!!
Regards, ansar
End of [B.] MangoB2 Update Guide
******************************************************************************************
******************************************************************************************
******************************************************************************************
A. NoDo Update Guide: How To Pass ChevronWP7 from OS 7004 to OS February 2011 update and 7392 NoDo
NoDo Prerequisites:
- a windows phone with an unlocked SIM card is required
- a Laptop with at least Vista Windows OS x86 or x64
- a Wi-Fi router with UPS are preferred due to unexpected external power shutdown
- On Laptop:
-- download this file: NoDo_Public_by_ansar.zip
-- extract NoDo_Public_by_ansar.zip using unzip /7zip to a folder and you will have the following files:
--- AdvancedConfig 1.2.0.0 beta.xap
--- ChevronWP7.cer
--- ChevronWP7.exe
--- dotNetFx40_Full_setup.exe
--- SamsungTools.xap
--- TouchXplorer.xap
--- vm_web.exe
--- Win32OpenSSL_Light-1_0_0c.exe
--- WP7AdsSDK.msi
--- WP7RootTools 0.5 alpha.xap
--- WPSupportTool-amd64.msi
--- WPSupportTool-x86.msi
--- ZuneSetupPkg.exe
-- install, if not already, by clicking on the following:
--- vm_web.exe, optionally for MS Visual Studio 2010 Express
--- Win32OpenSSL_Light-1_0_0c.exe, optionally but requires MS C++ 2008 Redistributables
--- WPSupportTool-x86 for 32k bit OS or WPSupportTool-amd64.msi 64k bit OS
--- dotNetFx40_Full_setup.exe
--- WP7AdsSDK.msi
--- ZuneSetupPkg.exe
--- after above zune installation wait and install when prompted the latest zune version
--- run zune and in settings>software>general, if not, uncheck the Start the zune software...
--- click on x to close zune
--- send ChevronWP7.cer to an e-mail account
--- it is recommended to install Microsoft Visual Studio 2010 Express for Windows Phone
--- in order to do this click on vm_web.exe
--- reset Laptop, enter to Windows OS and connect to internet via Wi-Fi router
- On windows phone:
-- connect windows phone to Laptop with a usb cable
-- download and install Windows Phone 7 Backup V1.2
-- take a backup of current ROM
-- if current ROM is an 7004 may neglect the following steps
-- if the following steps are neglected then perform a hard reset
-- flash windows phone with a 7004 branded ROM
-- advanced users can experiment in this case a flash with a different SPL, branded or unbranded, non NoDo or NoDo
-- unexpected results as reset or screen flood can appear with newer non NoDo and NoDo SPL
-- alternatively you can flash an unbranded 7004 ROM
-- advanced users can experiment in this case a flash with a different SPL, branded or unbranded, non NoDo or NoDo
-- unexpected results as reset or screen flood can appear with newer non NoDo and NoDo SPL
End of NoDo Prerequisites
Start of NoDo 1st phase:
- On windows phone after hard reset or ROM flashing:
-- tap on get started
-- tap on desired language and tap on next
-- enter SIM pin and tap on enter
-- on windows phone terms of use tap on accept
-- on windows phone settings tap on custom
-- on custom windows phone settings tap on Allow cellular data usage ... to uncheck and tap on next
-- tap on desired time zone and tap on next
-- Setup correct date and time and tap on next
-- On Sign in with a windows live ID tap on not now
-- let install apps, if any, and tap on done
-- Connect windows phone to internet via Wi-Fi router
-- tap on bottom left arrow to return to main screen
-- tap on Email setup tile and then tap on other account
-- remember that e-mail account must be that of sent ChevronWP7.cer
-- tap on Email address and enter Email address
-- tap on password and enter password
-- tap on sign in and wait for your name to appear
-- tap on your name and enter a name
-- tap on sign in and wait for e-mail account to sync
-- on e-mail account find and tap on ChevronWP7.cer e-mail
-- tap on ChevronWP7.cer attachment and wait for downloading to complete (ChevronWP7.cer will be shielded)
-- tap on shielded ChevronWP7.cer, tap on install and tap on ok as prompted
-- press and hold windows phone Power on/off button until power off
-- wait for power on, enter SIM pin and tap on enter
- On Laptop:
-- run zune and wait for start black screen to appear
-- click on next for start step to complete and on next again for phone name step to complete
-- wait for zune update your phone screen to appear
- On windows phone:
-- verify that is in not in screen locked or in sleep mode
- On Laptop:
-- run ChevronWP7.exe, check both boxes and click on unlock
-- click on relock and unlock as a test, stay unlock and click on x to close ChevronWP7.exe
-- run Application Deployment, click on browse:
--- for hTC phones, click onAdvancedConfig.1.2.0.0.beta.xap
--- for Omnia 7, click on SamsungTools.xap
-- and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy
-- when Status is XAP deployment complete, click on x to close Application Deployment
-- in zune click on update later and then click on x to close it
- On windows phone:
-- tap on close to An update is available message
-- tap on top right arrow
-- for hTC phones, tap on Advanced Config
--- in Advanced Config scroll screen right to enter Tweaks
--- in Tweaks tap twice to tick both allow and prevent
-- for Omnia 7, tap on SamsungTools
--- in dev. options screen tap to tick both Remove Sideload limit and Prevent Device Relocking
-- Press and hold Power on/off button until power off
-- Wait for power on, enter SIM pin and tap on enter
- On Laptop:
-- run zune
-- wait for zune update your phone black screen to appear with available February 2011 update
-- click on UPDATE NOW
-- wait for zune update in progress 9 steps to complete
-- when zune successful update screen appears click on finish
-- in zune click on x to close it
- On windows phone:
-- enter SIM pin when prompted
-- tap on top right arrow
-- for hTC phones, tap on the 1st app // is Advanced Config, bug: name not shown //
--- in Advanced Config slide screen right to enter Tweaks
--- in Tweaks you will see that both allow and prevent are ticked
-- for Omnia 7, tap on SamsungTools
--- in dev. options screen you will see that Remove Sideload limit is ticked
-- tap on bottom arrow to enter programs
-- find and tap on settings
-- find and tap on about and then on more info
-- HW and SW versions can be recorded if required
End of NoDo 1st phase
It is recommended to take a backup of NoDo 1st phase for future use
Start of NoDo 2nd phase
- On Laptop:
-- run zune and wait for start black screen to appear
-- click on next for start step to complete and on next again for phone name step to complete
-- wait for zune update your phone black screen to appear with available 7.0.7392.0 update
-- click on UPDATE NOW
-- wait for zune update in progress 10 steps to complete
-- when zune successful update screen appears click on FINISH
-- in zune click on x to close it
- On windows phone:
-- enter SIM pin when prompted
-- tap on top right arrow
-- for hTC phones, tap on 1st app // is Advanced Config, bug: name not shown //
--- in Advanced Config slide screen right to enter Tweaks
--- in Tweaks you will see that both allow and prevent are ticked
-- for Omnia 7, tap on SamsungTools
--- in dev. options screen you will see that Remove Sideload limit is ticked
-- tap on bottom arrow to enter programs
-- tap on settings and scroll down
-- tap on about and then on more info
-- HW and SW versions can be recorded if required
-- MAC address and SIM ID are now displayed
End of NoDo 2nd phase
It is recommended to take a backup of NoDo 2nd phase for future use
Congratulations, you have a NoDo OS 7392 updated and unlocked windows phone
Till next version enjoy XAPping!!!
Regards, ansar
End of [A.] NoDo Update Guide

Is there away to get the hack built in in to a rom like in the hd2 roms...?
Sent from my HD7 T9292 using XDA Windows Phone 7 App

When I got my HTC Mozart, I unlocked it with chevron. The firmware version was 7004 on a t-mobile branded rom.
After that I connected my phone to zune with flight mode on (easiest way to prevent relock) and updated it to 7008, and after that that to 7392.
Everything is working fine, I can deploy whatever I want to my phone, also with chevron I can only "relock", like ansar said.

lathera said:
Is there away to get the hack built in in to a rom like in the hd2 roms...?
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Hi,
Eventually not before mango but in any case there is no special need about it
I am working on something else right now and will see
Thnx for commenting!!
Regards, ansar

GB1337 said:
When I got my HTC Mozart, I unlocked it with chevron. The firmware version was 7004 on a t-mobile branded rom.
After that I connected my phone to zune with flight mode on (easiest way to prevent relock) and updated it to 7008, and after that that to 7392.
Everything is working fine, I can deploy whatever I want to my phone, also with chevron I can only "relock", like ansar said.
Click to expand...
Click to collapse
Hi,
I will try on unbranded phones to see if it works
Thnx for commenting!!
Regards, ansar

UNLOCKING
I have been all over these threads trying to get the best and most out os my phone. I have finally got it unlocked. Not if someone can help explain how to keep it unlocked without having to use flight mode? My last attempt lasted the first update but the second update caused it to lock so had to downgrade back to 7004 and start over.
If it has to be done through the registry can someone please explaine the process I downloaded the latest registry editor found on TouchEperience : http://forum.touchxperience.com/viewtopic.php?f=20&t=593
Thanks in advance for all help very appreciated.

So what exactly did you do ansar? Just updating your phone via Zune to "NoDo" and it still was "chevroned"? Which phone did you use?
Maybe you can give us more details. I would also like to update my phone but i dont want to loose the advanced config app

There are several threads that discuss and detail the prevent relock reg edit...
Sent from my Focus using XDA Windows Phone 7 App

Yes There Are...
munkeyphyst said:
There are several threads that discuss and detail the prevent relock reg edit...
Sent from my Focus using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Yes there are but with having an idea of what the end result of doing something wrong noobs like myself (to WP7) need a little spoon feeding when it comes to Registry changing.
I apologize if I am asking for a lot but I have always been one that if I understand something better than someone else I have no problem with breaking it down simpler. And maybe with understanding how to do this will also help me to understand how to do background changing which also only done through the register editor.
Thanks in advance for any and all help.

The details for keeping your phone unlocked are in my sig. Follow instructions from "How To Keep Your Phone Unlocked" part 1 and 2. Once you have set these reg keys the phone will not relock with updates.
Sent from my LG-C900 using XDA Windows Phone 7 App

Striving said:
I have been all over these threads trying to get the best and most out os my phone. I have finally got it unlocked. Not if someone can help explain how to keep it unlocked without having to use flight mode? My last attempt lasted the first update but the second update caused it to lock so had to downgrade back to 7004 and start over.
If it has to be done through the registry can someone please explaine the process I downloaded the latest registry editor found on TouchEperience : http://forum.touchxperience.com/viewtopic.php?f=20&t=593
Thanks in advance for all help very appreciated.
Click to expand...
Click to collapse
Hi,
I did test on 2 devices with branded ROMs and needed some different settings
An update to the thread with a guide will be performed after phone monitoring
Regards, ansar

derausgewanderte said:
The details for keeping your phone unlocked are in my sig. Follow instructions from "How To Keep Your Phone Unlocked" part 1 and 2. Once you have set these reg keys the phone will not relock with updates.
Sent from my LG-C900 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Thank you and I appreciate you response and help I just have 1 question before I attempt this. My question is will this work on the HTC HD7 which is what I have?

Striving said:
Thank you and I appreciate you response and help I just have 1 question before I attempt this. My question is will this work on the HTC HD7 which is what I have?
Click to expand...
Click to collapse
Hi,
Yes, in HD7 it was most easy and you can try this simple steps:
- Flash a 7004 branded ROM
- Setup e-mail account and send ChevronWP7.cer
- Install ChevronWP7.cer
- Install Application Deployment and optional Visual Studio 2010 express
- Run zune, sync and let pass all steps but not upgrade yet
- Run ChevronWP7.exe and unlock
- Relock and unlock as a test and stay unlock
- Deploy AdvanchedConfig 1.2.0.0 beta, to keep unlock
- Now let zune upgrade
- At the end you will have an 7008
- Run ChevronWP7.exe and check if it is unlock
- If not let me know
- If yes, let zune to upgrade 7392
- At the end you will have a working 7008 backup to return in case of emegency
- Run ChevronWP7.exe and check if it is unlock
Regards, ansar

Nice work ansar. Will this also apply to my HTC Mozart 7, T-Mobile DE, currently chevroned, prevented from re-lock and on 7004? I want to update to Nodo

Two Computers
ansar.ath.gr said:
Hi,
Yes, in HD7 it was most easy and you can try this simple steps:
- Flash a 7004 branded ROM
- Setup e-mail account and send ChevronWP7.cer
- Install ChevronWP7.cer
- Install Application Deployment and optional Visual Studio 2010 express
- Run zune, sync and let pass all steps but not upgrade yet
- Run ChevronWP7.exe and unlock
- Relock and unlock as a test and stay unlock
- Deploy AdvanchedConfig 1.2.0.0 beta, to keep unlock
- Now let zune upgrade
- At the end you will have an 7008
- Run ChevronWP7.exe and check if it is unlock
- If not let me know
- If yes, let zune to upgrade 7392
- At the end you will have a working 7008 backup to return in case of emegency
- Run ChevronWP7.exe and check if it is unlock
Regards, ansar
Click to expand...
Click to collapse
Hi Ansar,
Thanks a whole lot I will do this now I do have one question. After this is done can you connect to another computer I recently got a new laptop (running windows 7) and it is what I have been doing these things with my phone now before I got the laptop I was using my computer (which run XP) last night I connected it to my computer to download my audio and pictures this morning it was back lock and I had it on airplane mode. Will I be limit to only connecting to my laptop or will the permnant unlock continue to keep it unlocked?
Does anyone have a direct link to the AdvanchedConfig 1.2.0.0 beta when I searched here all 3 results bring me back here and when I google it it takes me to TouchXperience site and the I only see versions 3.0; 3.1; 3.2; and 3.3.
Question in continuing to find Advanced Config I came across this:
How to sideload more than 10 apps ?
Unlock your device with a modded ChevronWP7 version:
ChevronWP7_NoSideloadLimit.zip ( 83.27K ) Number of downloads: 26
Credits to xda user hounsell on http://www.red-gsm.net/t48485/
Is this better that the one I've been using?
Thanks in Advance

Striving said:
Hi Ansar,
...Will I be limit to only connecting to my laptop or will the permnant unlock continue to keep it unlocked?
Does anyone have a direct link to the AdvanchedConfig 1.2.0.0 beta when I searched here all 3 results bring me back here and when I google it it takes me to TouchXperience site and the I only see versions 3.0; 3.1; 3.2; and 3.3.
Question in continuing to find Advanced Config I came across this:
How to sideload more than 10 apps ?...
Thanks in Advance
Click to expand...
Click to collapse
Hi,
You cannot use XP, at least Vista to any PC/Laptop
DL it from here: AdvancedConfig_1.2.0.0_beta.xap
This has more than you need to keep unlock, maximum apps etc
Regards, ansar

Visual Studio 2010 express
ansar.ath.gr said:
Hi,
You cannot use XP, at least Vista to any PC/Laptop
DL it from here: AdvancedConfig_1.2.0.0_beta.xap
This has more than you need to keep unlock, maximum apps etc
Regards, ansar
Click to expand...
Click to collapse
Thanks been waiting for your reply before I did anything. downloading now and will follow your instructions. will let you know how things turn out.
Muchly appreciated.
I just noticed you added Visual Studio 2010 express is it included in something i've downloaded already im searching for it but if you have a link i'll take it.
It's been over 2 hours and I don't see it in any thread.

Striving said:
Thanks been waiting for your reply before I did anything. downloading now and will follow your instructions. will let you know how things turn out.
Muchly appreciated.
I just noticed you added Visual Studio 2010 express is it included in something i've downloaded already im searching for it but if you have a link i'll take it.
Click to expand...
Click to collapse
Hi,
Visual Studio is Optional for Developing WP7 apps
At least you should dl WPSupportTool-x86.msi [32bit] or WPSupportTool-amd64.msi [64bit]
All can be dl from http://download.microsoft.com
Regards, ansar

ansar.ath.gr said:
Hi,
Visual Studio is Optional for Developing WP7 apps
At least you should dl WPSupportTool-x86.msi [32bit] or WPSupportTool-amd64.msi [64bit]
All can be dl from http://download.microsoft.com
Regards, ansar
Click to expand...
Click to collapse
Are these apps/programs for the phone itself or for the computer? I put WPSupportTool-amd64.msi [64bit] in the search and got: Results for:"WPSupportTool-amd64.msi"
Sorry, no results were found. It may help to:
Okay I realized I wasn't searching Microsoft when I did choose it I still got the same results then google open up leading me to http://forum.xda-developers.com/showthread.php?t=1021920 where the Windows Phone Support Tools can be downloaded. Now to find the Visual Studio. Which I am still a little confused because I thought your instructions these were things to install on the phone and if that is the case then what I'm doing is wrong and therefore I can't find the right things .
Okay I found it but again I am still confused becase you said: "Install Application Deployment and optional Visual Studio 2010 express" but what I have to my knowledge is not a XAP app.

hello ansar..
i have an HD7 branded for o2 and i unlock it on 7004 and prevent it from locking
now i have it on the last update and i can deploy any xap =)
so can i help you?!

FIX for Chevron Connection Errors!

For those having problem with installing Chevron, specifically, the "uh oh" error.
IF METHOD 1 doesnt Work, Try method 2!
TWO METHODS.
METHOD 1:
1. Click the Windows Icon.
2. On the search box, type device manager, click enter
3. Click continue when prompted
4. On the device manager window, find "Portable Devices"
5. Right click on your Leo. Uninstall
6. Unplug your device. if you can find another "Portable Devices" uninstall it also (as it was for my case)
7. Restart PC
8. Plug device again (Do not open Zune software yet)
9. Windows should try to install driver for the device. Click on it. After installing there should be two things in there... the other one is your Leo
ready to use. I can't remember the other one, but I think it is "storage card ready to use"
10. When done correctly. Zune will open up on its own.
11. See the device sync
12. Your free space should appear in the zune software
13. Run Chevron
14. It should open now without the "uh oh" error
Then follow the original instruction on how to install chevron
METHOD 2
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to
windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
Attention: if port 443 is used (see on your list) stop IIS or exit Skype program
Hope this helps

both method doesn't work especially the host after deleting as stated save it when open it again still the windows still exist.
but nvr mind i don't have any problem using third party software like register edit etc.

Perefect. i had trouble but option 2 work like a charm! one suggestion, instead of opening an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to, it is easier to Open up "Notepad" as administrator" Then click on File > Open (in the file name)
%windir%\system32\drivers\etc\hosts and and delete any references to
windowsphone developer services, you save it and you are done.

for me both of this methods don t work i have 7.0.7394 os version!!!what to do please HEALP!!

[Q] Passing Chevron WP7 from NoDo to Mango on Samsung Focus

I've been following on the Mango upgrades and whatnot, since I just recently upgraded my Samsung Focus to Mango. However, I have yet to see a way to pass ChevronWP7 to a Samsung WP7. I know with LGs you can use the MFG regedit, and with HTCs you can use this xml method found here:
http://forum.xda-developers.com/showthread.php?t=1101344
Is anyone anywhere working on a way to pass ChevronWP7 from NoDo to Mango on a Samsung device? I just want some confirmation, because I'd love to use Mango to it's fullest extent. Thanks guys!

VenezuelaDan said:
I've been following on the Mango upgrades and whatnot, since I just recently upgraded my Samsung Focus to Mango. However, I have yet to see a way to pass ChevronWP7 to a Samsung WP7. I know with LGs you can use the MFG regedit, and with HTCs you can use this xml method found here:
http://forum.xda-developers.com/showthread.php?t=1101344
Is anyone anywhere working on a way to pass ChevronWP7 from NoDo to Mango on a Samsung device? I just want some confirmation, because I'd love to use Mango to it's fullest extent. Thanks guys!
Click to expand...
Click to collapse
can you please provide us with a guide or the steps you used to upgrade your focus
i checked several threads here, but was unable to upgrade & kept getting an error message: " no devices were found"

I made this post here: http://forum.xda-developers.com/showpost.php?p=15329491&postcount=5
Your device needs to already be dev unlocked and in NODO!!
Someone else has confirmed that you need diagnosis version is 1122.
1. Make a backup of your device. You can use my app for that if you wish: http://forum.xda-developers.com/showthread.php?t=1103011
1.1 - Make a backup
1.2 - Make a backup
1.3 - Make a backup!!!!
Get the point? you CAN NOT get the official Mango update when its released without reverting to NODO so MAKE A DAMN BACKUP! I personally have 4 backups just in case!
2. I installed this unlock.xml: http://forum.xda-developers.com/showpost.php?p=15316160&postcount=9
3. Install WP7 Root Toosl by Heathcliff .5 alpha from his thread: http://forum.xda-developers.com/showthread.php?t=1021135
4. Load the root tools and using the explorer create a directory called provxml in the root of the drive if it doesnt already exist.
5. Using the root tools copy unlock.xml file from: Applications\Install\D19A80F2-1717..... (you may have to browse folders in that path) to the provxml folder at the root of the device. (I apologize but I don't know the exact path I believe it starts in the root but I would have to revert to nodo to know for sure as the root tools don't work in mango.
6. *OPTIONAL TEST* Once that file is there you can test it to be sure it works like I did by changing one of the unlock reg keys and applying the XML to confirm it changes back. I used the root tools registry editor part to browse to: "HKLM\Software\Microsoft\DeviceReg" I changed the value "PortalUrlProd" by adding random text as it should be clear/empty/null. Then I applied the xml by going to the diagnosis tools from my shortcut or by going to the phone app and then the keypad and typing: ##634#. Once in Diagnosis enter: *#9908# to get to the GPRS profiles. Tap the dropdown and you should see unlock in your list. Select unlock and then save at the bottom. It only takes a second and says success in the window below the dropdown. Now exit diagnosis and use the root tools again to confirm the registry value you set before is now cleared/empty/null. If that works you can proceed with confidence.
7. Perform the 2 step mango update from this link: http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11
8. Once updated and in mango apply the xml by: going to the diagnosis tools from a shortcut or by going to the phone app and then the keypad and typing: ##634#. Once in Diagnosis enter: *#9908# to get to the GPRS profiles. Tap the dropdown and you should see unlock in your list. Select unlock and then save at the bottom. It only takes a second and says success in the window below the dropdown. Again diagnosis version 1122 is needed for this to work.
One word of warning. I had to reconfigure the APN to get network to work but I still couldnt receive MMS. So in the end I read that to get it set up you have to reset the phone and let the configuration steps set up network profile. I wasnt about to do that so I called AT&T and said I was going to another country and needed my unlock code to put a sim card in from there and they gave it to me. They said I needed another carrier SIM to input it. Instead I went to diagnosis and entered: #7465625*638*# That brought me to the Network Lock screen. I made sure disabled was checked and entered the unlock code they gave me on the phone in the NCK section and tapped execute. That unlocked my phone which let me use the samsung network profile tool available form the samsung marketplace (only on phone) to select the ATT (not AT&T) profile. Actually I toggled to AT&T then back to ATT and everything worked!

Yup.... What he said!!!
Mango on my Focus is awesome. I didn't do the unlock though because that tutorial came after I upgraded to mango. Now I'm too scared to do it again. And frankly, the whole process takes forever. In the end, it's worth it!!! I just need a working registry editor now because I'm back to that stupid 16-bit colors!!! I hate it.

It's not necessary to make a back-up if you just don't care about the data. Simply install an OEM ROM from the carrier of your choice on the Samsung Focus. I have several phones and just figured *meh* who cares - I'll reinstall the apps I want and just lose my game saves (please let cloud game saves come to WP7 soon!!)
This of course doesn't address the unlock issue. My hope is soon we get a non-branded ROM for the Samsung Focus sooner rather than later so I can finally resolve the MMS issues.
As far as unlocking I have given up for the time being. May just buy a Chevron unlock...

I'm not having MMS issues on mine. Just the damn 16-bit color limit. All the gradients are chopped. I want the 24-bit back. It's just a small registry hack! Why can't samsung or AT&T update it.

pdangcil said:
I'm not having MMS issues on mine. Just the damn 16-bit color limit. All the gradients are chopped. I want the 24-bit back. It's just a small registry hack! Why can't samsung or AT&T update it.
Click to expand...
Click to collapse
Odd I havent tested it with the diag screen but I still occassionaly get the "Red screen" on boot up which is a symptom of the color change hack.

pdangcil said:
Yup.... What he said!!!
Mango on my Focus is awesome. I didn't do the unlock though because that tutorial came after I upgraded to mango. Now I'm too scared to do it again. And frankly, the whole process takes forever. In the end, it's worth it!!! I just need a working registry editor now because I'm back to that stupid 16-bit colors!!! I hate it.
Click to expand...
Click to collapse
Too scared? Bah! I have done it 4 times with no problems and I have 4 backups of my phone pre-mango so whats to be scared of?

Get At&T settings back the easy way
Instead of going through the pain with At&T this will fix the AT&T settings after you are done wit the unlock. from the diagnosis app
g_AutoSimSetting : 40*047#3, *#94765#

sandrobber said:
Instead of going through the pain with At&T this will fix the AT&T settings after you are done wit the unlock. from the diagnosis app
g_AutoSimSetting : 40*047#3, *#94765#
Click to expand...
Click to collapse
Interesting... so it disables then re-enables the auto-sim setting? Should we do the reboot in the middle that it asks for?

hx4700 Killer said:
I made this post here: http://forum.xda-developers.com/showpost.php?p=15329491&postcount=5
Your device needs to already be dev unlocked and in NODO!!
Also I don't know if it is required but my diagnosis version is 1122.
1. Make a backup of your device. You can use my app for that if you wish: http://forum.xda-developers.com/showthread.php?t=1103011
1.1 - Make a backup
1.2 - Make a backup
1.3 - Make a backup!!!!
Get the point? you CAN NOT get the official Mango update when its released without reverting to NODO so MAKE A DAMN BACKUP! I personally have 4 backups just in case!
2. I installed this unlock.xml: http://forum.xda-developers.com/showpost.php?p=15316160&postcount=9
3. Install WP7 Root Toosl by Heathcliff .5 alpha from his thread: http://forum.xda-developers.com/showthread.php?t=1021135
4. Load the root tools and using the explorer create a directory called provxml in the root of the drive if it doesnt already exist.
5. Using the root tools copy unlock.xml file from: Applications\Install\D19A80F2-1717..... (you may have to browse folders in that path) to the provxml folder at the root of the device. (I apologize but I don't know the exact path I believe it starts in the root but I would have to revert to nodo to know for sure as the root tools don't work in mango.
6. *OPTIONAL TEST* Once that file is there you can test it to be sure it works like I did by changing one of the unlock reg keys and applying the XML to confirm it changes back. I used the root tools registry editor part to browse to: "HKLM\Software\Microsoft\DeviceReg" I changed the value "PortalUrlProd" by adding random text as it should be clear/empty/null. Then I applied the xml by going to the diagnosis tools from my shortcut or by going to the phone app and then the keypad and typing: ##634#. Once in Diagnosis enter: *#9908# to get to the GPRS profiles. Tap the dropdown and you should see unlock in your list. Select unlock and then save at the bottom. It only takes a second and says success in the window below the dropdown. Now exit diagnosis and use the root tools again to confirm the registry value you set before is now cleared/empty/null. If that works you can proceed with confidence.
7. Perform the 2 step mango update from this link: http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11
8. Once updated and in mango apply the xml by: going to the diagnosis tools from a shortcut or by going to the phone app and then the keypad and typing: ##634#. Once in Diagnosis enter: *#9908# to get to the GPRS profiles. Tap the dropdown and you should see unlock in your list. Select unlock and then save at the bottom. It only takes a second and says success in the window below the dropdown. I had diagnosis version 1122 so I don't know if that is needed for this to work or not.
One word of warning. I had to reconfigure the APN to get network to work but I still couldnt receive MMS. So in the end I read that to get it set up you have to reset the phone and let the configuration steps set up network profile. I wasnt about to do that so I called AT&T and said I was going to another country and needed my unlock code to put a sim card in from there and they gave it to me. They said I needed another carrier SIM to input it. Instead I went to diagnosis and entered: #7465625*638*# That brought me to the Network Lock screen. I made sure disabled was checked and entered the unlock code they gave me on the phone in the NCK section and tapped execute. That unlocked my phone which let me use the samsung network profile tool available form the samsung marketplace (only on phone) to select the ATT (not AT&T) profile. Actually I toggled to AT&T then back to ATT and everything worked!
Click to expand...
Click to collapse
Thank you very much
worked wondefully
3G data internet was not working at first but works great after manually choosing ATT from network profile app

MMS issues don't exist anymore if you install the Samsung Tools XAP. Even if you upgrade to Mango after, some remnants remain from the unlock, and one of those is the expanded MMS settings this tool gives (my phone is locked after mango because I didnt do this hack, but my MMS, 3G, and custom live tile colors still work....)

hx4700 Killer said:
I made this post here: http://forum.xda-developers.com/showpost.php?p=15329491&postcount=5
Your device needs to already be dev unlocked and in NODO!!
Also I don't know if it is required but my diagnosis version is 1122.
1. Make a backup of your device. You can use my app for that if you wish: http://forum.xda-developers.com/showthread.php?t=1103011
1.1 - Make a backup
1.2 - Make a backup
1.3 - Make a backup!!!!
Get the point? you CAN NOT get the official Mango update when its released without reverting to NODO so MAKE A DAMN BACKUP! I personally have 4 backups just in case!
2. I installed this unlock.xml: http://forum.xda-developers.com/showpost.php?p=15316160&postcount=9
3. Install WP7 Root Toosl by Heathcliff .5 alpha from his thread: http://forum.xda-developers.com/showthread.php?t=1021135
4. Load the root tools and using the explorer create a directory called provxml in the root of the drive if it doesnt already exist.
5. Using the root tools copy unlock.xml file from: Applications\Install\D19A80F2-1717..... (you may have to browse folders in that path) to the provxml folder at the root of the device. (I apologize but I don't know the exact path I believe it starts in the root but I would have to revert to nodo to know for sure as the root tools don't work in mango.
6. *OPTIONAL TEST* Once that file is there you can test it to be sure it works like I did by changing one of the unlock reg keys and applying the XML to confirm it changes back. I used the root tools registry editor part to browse to: "HKLM\Software\Microsoft\DeviceReg" I changed the value "PortalUrlProd" by adding random text as it should be clear/empty/null. Then I applied the xml by going to the diagnosis tools from my shortcut or by going to the phone app and then the keypad and typing: ##634#. Once in Diagnosis enter: *#9908# to get to the GPRS profiles. Tap the dropdown and you should see unlock in your list. Select unlock and then save at the bottom. It only takes a second and says success in the window below the dropdown. Now exit diagnosis and use the root tools again to confirm the registry value you set before is now cleared/empty/null. If that works you can proceed with confidence.
7. Perform the 2 step mango update from this link: http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11
8. Once updated and in mango apply the xml by: going to the diagnosis tools from a shortcut or by going to the phone app and then the keypad and typing: ##634#. Once in Diagnosis enter: *#9908# to get to the GPRS profiles. Tap the dropdown and you should see unlock in your list. Select unlock and then save at the bottom. It only takes a second and says success in the window below the dropdown. I had diagnosis version 1122 so I don't know if that is needed for this to work or not.
One word of warning. I had to reconfigure the APN to get network to work but I still couldnt receive MMS. So in the end I read that to get it set up you have to reset the phone and let the configuration steps set up network profile. I wasnt about to do that so I called AT&T and said I was going to another country and needed my unlock code to put a sim card in from there and they gave it to me. They said I needed another carrier SIM to input it. Instead I went to diagnosis and entered: #7465625*638*# That brought me to the Network Lock screen. I made sure disabled was checked and entered the unlock code they gave me on the phone in the NCK section and tapped execute. That unlocked my phone which let me use the samsung network profile tool available form the samsung marketplace (only on phone) to select the ATT (not AT&T) profile. Actually I toggled to AT&T then back to ATT and everything worked!
Click to expand...
Click to collapse
One important observation:
Diagnose v922 does NOT see Unlock.xml , thus you can't apply the GPRS profile. You need to update to v1122.
To get Diagnose v1122, you need to re-brand your phone back to the original carrier. In my case it was:
HKLM\System\Platform\DeviceTargetingInfo\MobileOperator = "ATT-US"
After that, I got a Samsung update (updated radio+sw) in Zune, and with it I also got the diagnose v1122.
If you still get Diagnose v922 after the "Samsung Update", then delete Diagnose app and run *#634# and Diagnose will be updated.

Another word of warning.
This is a BETA Mango update.
I just tried it and my Focus and after the update it got stuck at Samsung logo. However, it can be fixed, read my post here.
Might have to do with SD card I use (16 GB Class 2) but I doubt it as I didn't have any issues in over 5 months, updates 7004 to 7392.

Upgraded a Focus once and then got locked out. Updated again and when I do the Diagnosis then *#9908# and select unlock, it says Loading GPRS Profile for unlockProvision and then nothing. Same happened with the last upgrade so now I worried that I'm only a little time away from getting locked again.

Deano69 said:
Upgraded a Focus once and then got locked out. Updated again and when I do the Diagnosis then *#9908# and select unlock, it says Loading GPRS Profile for unlockProvision and then nothing. Same happened with the last upgrade so now I worried that I'm only a little time away from getting locked again.
Click to expand...
Click to collapse
I think it worked. I did the extra step 6, and I've tested with the "PortalUrlProd" value before the actual update and it was reset. Same as you, I got the "Loading GPRS profile..." message and nothing else. But it worked.

EnderPsp said:
Another word of warning.
This is a BETA Mango update.
I just tried it and my Focus and after the update it got stuck at Samsung logo. However, it can be fixed, read my post here.
Might have to do with SD card I use (16 GB Class 2) but I doubt it as I didn't have any issues in over 5 months, updates 7004 to 7392.
Click to expand...
Click to collapse
I have a 16GB Sandisk Class 2 memory card in my focus and it works fine. I had read that diag 1122 *might* be needed but wasnt sure until now

hx4700 Killer said:
I have a 16GB Sandisk Class 2 memory card in my focus and it works fine. I had read that diag 1122 *might* be needed but wasnt sure until now
Click to expand...
Click to collapse
Btw, can someone make a xap with Diagnose 1122, please? Rogers firmware doesn't seem to get the "Samsung Update" that installs v1122, and I'm stuck with default v927... Or give any pointers how to get the new Diagnose
I'm pretty sure that if I flash the AT&T fw I'll get v1122, but I like Rogers rom better (mine is originally an AT&T Focus).

EnderPsp said:
Btw, can someone make a xap with Diagnose 1122, please? Rogers firmware doesn't seem to get the "Samsung Update" that installs v1122, and I'm stuck with default v927... Or give any pointers how to get the new Diagnose
I'm pretty sure that if I flash the AT&T fw I'll get v1122, but I like Rogers rom better (mine is originally an AT&T Focus).
Click to expand...
Click to collapse
I got it somewhere else on here, didnt need it though:

Is there any way to get the updated diagnosis app on Omnia 7? (Optus Australia, build 7392)
That XAP won't allow me to sideload for some reason, and even if it did, that won't help me after I get into Mango.

[JAILBREAK][GUIDE] Interop Unlock for Windows 10 Mobile + All Capabilities

Hello Folks,
Yeah this is the First thread, First Post about the Windows 10 Mobile Hacking.
Now the First Interop Unlock hack for W10M is now available. It's currently limited to LUMIA/SAMSUNG phones, although we're trying to extend it to other OEM Device, of course. (It requires specific Driver/Services to "RUN" into "SYSTEM" Privileges. Hence, other OEM Device is lack of these. I.e HTC/Micromax etc. etc.)
*** UPDATE : Microsoft is trying to break our hack through blocking "NdtkSvc" on Lumia. So the hack currently doesn't work directly on Lumia 950/550 or later. Even if you updated extras+info on any lumia you will loss Service Access. So Stay Away from Extras+Info***
A brief summary, for those unfamiliar with interop-lock:
Windows Phone allows a number of high-privilege app capabilities, which can be used to make changes to the OS which are normally not possible for a third-party Applications.
The limitation on whether we can use these capabilities or not is based on what "level" of developer unlock the phone has.
ON WP7/8/8.1
Standard "ISV" (Independent Software Vendor) Dev Unlock (max 10 apps or less) is what pretty much everybody gets.
OEMs, however, get a special OEM Developer Unlock (300 apps or more) which gives them the ability to use much higher-privilege app capabilities than the standard ISV unlock permits. The name comes from ID_CAP_INTEROPSERVICES, the capability which was most important in WP7/WP8/8.1.
However, there are a great many interesting capabilities. Note that Interop-unlock by itself does not enable all of these. However, at least on Lumia/Samsung phones, it is now possible to enable *all* the capabilities.
As per my Research Microsoft has give up some FREEDOM to the 3rd Party Developers. Now the "ISV" Developers can sideload apps with the All "SECOND PARTY CAPABILITIES". However, having a Some hive privilege "SYSTEM" Resource that we can expand it to Enable All Capabilities.
The instructions are as follows:
1. Turn "ON" Developer Unlock Mode. (Go to Settings> Update & Security> For Developers)
2. Download "Root Tool.xap" from attachments and deploy It.
Recommended:
Go to "JailBreak Tool"
Select your choice, That's It !
Custom:
Go to Device Specific Registry Editor Tool.
Select "HKEY_LOCAL_MACHINE"
Write default values.
(For Lumia)
Code:
"SOFTWARE\Microsoft\DeviceReg\Install"
"MaxUnsignedApp"=DWORD:7FFFFFFF
(For Samsung)
Code:
"SOFTWARE\Microsoft\DeviceReg\Install"
"MaxUnsignedApp"=DWORD:2147483647
Preventing Unlock:
Code:
"SOFTWARE\Microsoft\DeviceReg"
"PortalUrlInt"="https://127.0.0.1"
"PortalUrlProd"="https://127.0.0.1"
Unlocking NEW Capability Engine:
Write these values:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SecurityManager\AuthorizationRules\Capability\capabilityRule_DevUnlock]
"CapabilityClass"="capabilityClass_DevUnlock_Internal"
"PrincipalClass"="principalClass_DevUnlock_Internal"
ENJOY
Hence, this is not a Complete "Root Access" but we are working on it to gain Full SYSTEM Access.
Still, If you got any Issue's after this tutorial then ask your "Questions" In Q/A Thread.
SPECIAL Thanks to @vcfan (Without the RPC Code from "vcFAN" was Impossible to Interop Unlock or Capability Unlock)
Thanks to @ngame and @GoodDayToDie
Thanks Everybody for your Big Support.

Reserved For Common Q/A

Reserved For Further Developments, LOGS and Related Apps

Questions and Answers
Will this work on other OEM Device / Are you working on this for other OEM Device / What about HTC, or some other OEM?
The current hack relies on a Lumia/Samsung-specific component. Adding support for other phones will require new hacks. We are looking into it.
Can I re-lock my phone if I want to?
Yes, easily. The simplest method is to turn off the "Developer mode" in Settings> Update & Security> For Developers. This doesn't remove any changes that were made using the interop-unlock, though (for example, it won't undo the Capability-Unlock hack, not will it set back the Full FS Access hack). Apps that require interop-unlock will still be installed, but may no longer run. To manually remove interop-unlock, you can reset all the registry values that were changed by the interop-unlock hack to their original values, and remove all the apps. There still may be a great many other changes that also need reverting, though, if you want to get back to stock settings.
Can I get my phone completely back to stock settings without knowing every little thing I changed?
Yes, a hard (factory) reset will undo all changes made by interop-unlock, or any apps (including ones that require interop-unlock), and will remove all apps. If you need to send your phone in for warranty servicing and are worried that they won't take it because you interop-unlocked it, this approach will fix that (they would probably tell you to hard-reset anyhow, if it's conceivably a software problem).
Will the interop-unlock survive a hard reset?
Not using this method! Read the question above. This unlock is purely in software, not firmware; it is reset along with everything else.

Thanks bro, I worked on my lumia 830 with build 10512.
But I already had the vcREG installed, root_tool not worked for me.

denisf1981 said:
Thanks bro, I worked on my lumia 830 with build 10512.
But I already had the vcREG installed, root_tool not worked for me.
Click to expand...
Click to collapse
Try Once.
XAP Updated. My Mistake, I was not checked anything.

djamol said:
Try Once.
XAP Updated. My Mistake, I was not checked anything.
Click to expand...
Click to collapse
Thank you, now work

Hi djamol,
Thanx for this. So after doing this, are we able to say put HOSTS to block ads? I have not had the time to try this, gonna do this after work

oelapoel said:
Hi djamol,
Thanx for this. So after doing this, are we able to say put HOSTS to block ads? I have not had the time to try this, gonna do this after work
Click to expand...
Click to collapse
It's a full interop/cap unlock based on VCREG 1.1 project
you can navigate Lumia registry editor -> templates -> check the check boxes -> apply
then use Custom PFD to set these values :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SecurityMana ger\AuthorizationRules\Capability\capabilityRule_D evUnlock]
"CapabilityClass"="capabilityClass_DevUnlock_Inter nal"
"PrincipalClass"="principalClass_DevUnlock_Interna l"
if you see any SPACE in values above they are seems xda bug . no spaces in above strings

Do I need to use the WP10 deployer or does the 8.1 work too?
I am asking because I don't yet have VS2015 installed and would like to not require it (first because I am used to VS2013 and second because the dreamspark servers seem to be incredibly slow)

ngame said:
It's a full interop/cap unlock based on VCREG 1.1 project
you can navigate Lumia registry editor -> templates -> check the check boxes -> apply
then use Custom PFD to set these values :
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SecurityMana ger\AuthorizationRules\Capability\capabilityRule_D evUnlock]
"CapabilityClass"="capabilityClass_DevUnlock_Inter nal"
"PrincipalClass"="principalClass_DevUnlock_Interna l"
if you see any SPACE in values above they are seems xda bug . no spaces in above strings
Click to expand...
Click to collapse
amazing. confirmed interop unlock works on my NL1520. no more ads.. this is the most annoying thing using w10m. cheers
I'll play around a bit more later on when i have time

Can anyone plz explain what to do after installing root tools........

Anyone is getting manifest error?
Error: The manifest could not be loaded and may not be valid

@souma_rox
The instructions are as follows:
1. Turn "ON" Developer Unlock Mode. (Go to Settings> Update & Security> For Developers)
2. Download "Root Tool.xap" from attachments and deploy It.
Recommended:
For Lumia:
Open "vcReg" Tool.
Hit the Application Bar and select "Templates".
Here will see two options, Interop/Capability Unlock and "Full File System" Access through the MTP Protocol.
Check your options, and click "Apply".
You are Done !
basically: you run root tools and go to "LUMIA REGISTRY EDITOR". bottom right corner. click the "..." and "TEMPLATES", tick interop unlock + full fs access" and click APPLY. restart. thats it
@onecosmic
try using WP SDK 8.0. Do not use 8.1

oelapoel said:
@souma_rox
The instructions are as follows:
1. Turn "ON" Developer Unlock Mode. (Go to Settings> Update & Security> For Developers)
2. Download "Root Tool.xap" from attachments and deploy It.
Recommended:
For Lumia:
Open "vcReg" Tool.
Hit the Application Bar and select "Templates".
Here will see two options, Interop/Capability Unlock and "Full File System" Access through the MTP Protocol.
Check your options, and click "Apply".
You are Done !
basically: you run root tools and go to "LUMIA REGISTRY EDITOR". bottom right corner. click the "..." and "TEMPLATES", tick interop unlock + full fs access" and click APPLY. restart. thats it
@onecosmic
try using WP SDK 8.0. Do not use 8.1
Click to expand...
Click to collapse
I installed root tool on my lumia 920 but when i tap to "lumia registry editor" it crash!
What i can do?

oelapoel said:
@onecosmic
try using WP SDK 8.0. Do not use 8.1
Click to expand...
Click to collapse
Thanks!

I can confirm - working on Lumia 930 WP build 10512.

ADeltaX said:
I installed root tool on my lumia 920 but when i tap to "lumia registry editor" it crash!
What i can do?
Click to expand...
Click to collapse
Please let me know your firmware version and OS version
What version of 920 do you have?
RM-820/821/822 or chinese type L920T?

ngame said:
Please let me know your firmware version and OS version
What version of 920 do you have?
RM-820/821/822 or chinese type L920T?
Click to expand...
Click to collapse
OS version: 10.0.10512.1000
Firmware: 3051.50009.1451.1009
RM-821

ADeltaX said:
OS version: 10.0.10512.1000
Firmware: 3051.50009.1451.1009
RM-821
Click to expand...
Click to collapse
OK same as my device . I will write a little tool for you .

Unlock car multimedia system

I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)

Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?

I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.

mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.

Did someone have any success?

Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?

gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps

?
Hey did you succeed?

please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks

Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon

Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?

Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress

For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.

mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?

Hi Mr.
mrtowel​do you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job