Related
I just purchased an Otterbox Defender for $31.95 on eBay (an excellent deal! ). I just wanted to see if the case makes the phone more difficult to use and if there are any problems that have arisen to anyone as a result of it.
I used the defender for a day and returned it. For one, i forgot how much of a non-fan i am of soft shells/cases.... since they seem to attract dust from other dimensions sometimes. The holster is nice... but in order to clip it in or take it out, it usually seemed to be a two-hand job, so that kinda defeated the purpose to me. It also seemed to make it slightly more difficult to actually get an accurate read with the fingerprint sensor.... i believe mostly due to the silicon outer shell, which as you swipe your finger, would peel back somewhat and make it hard to actually get a complete scan without stopping short or something like that.
elementaldragon said:
I used the defender for a day and returned it. For one, i forgot how much of a non-fan i am of soft shells/cases.... since they seem to attract dust from other dimensions sometimes. The holster is nice... but in order to clip it in or take it out, it usually seemed to be a two-hand job, so that kinda defeated the purpose to me. It also seemed to make it slightly more difficult to actually get an accurate read with the fingerprint sensor.... i believe mostly due to the silicon outer shell, which as you swipe your finger, would peel back somewhat and make it hard to actually get a complete scan without stopping short or something like that.
Click to expand...
Click to collapse
I've used Defenders before with my Nexus One & HTC HD2, and loved them though they were very bulky, but I thought the extra protection was worth it (just in case). I Ask because the my Defender for my N1 had problems with the buttons and they weren't really responsive and dust always got in the screen from the hole for the trackball. Thanks for your feedback! I'm planning on painting the plastic shell either red or white since I've always envied the iPhones multitude of colors
I have had mine in a defender since day one. I used it without for about 1/2 a day then loaded it in. I own a construction company so i am out in the dirt and weather constantly so the otter box is almost a must. I haven't noticed any loss of functionality. It takes a few times to learn how to unsnap the latch with the knuckle of your index finger as you remove the phone with one hand but it works once you learn the motion. No problems whatsoever using the fingerprint unlock, it is a pretty cool feature. I did notice the screen was not as sensitive for about 5 minutes until the plastic cover built in the case settled down to it.
Jack
I have the defender on mine..no problems so far..yes it makes the phone a little bigger. Its the first time that I am using such a case.
I quickly figured out how to snap it in and out of the belt clip with one hand.
I also have mine in a Defender case - However i ripped out the built in screen protector in the Defender case - those things are lame... I have a screen protector i put on within 10 seconds of opening the box for the phone - my screen has never been touched since taken out of the box...
I have no issues with the Otterbox Defender Case or Holster whatsoever...
Not to hijack the thread but the Otterbox Commuter is an extremely solid case that gives excellent protection without the bulk or the soft exterior of the Defender. I used one on my iPhone 4 for the past 6 months and loved it. Waiting on that model to show up for the Atrix now.
HarleyDude said:
Not to hijack the thread but the Otterbox Commuter is an extremely solid case that gives excellent protection without the bulk or the soft exterior of the Defender. I used one on my iPhone 4 for the past 6 months and loved it. Waiting on that model to show up for the Atrix now.
Click to expand...
Click to collapse
They already have one for the Atrix....
jgc121 said:
I also have mine in a Defender case - However i ripped out the built in screen protector in the Defender case - those things are lame... I have a screen protector i put on within 10 seconds of opening the box for the phone - my screen has never been touched since taken out of the box...
I have no issues with the Otterbox Defender Case or Holster whatsoever...
Click to expand...
Click to collapse
This. I bought my Atrix along with some anti-glares and an Otterbox Defender. I quickly realized how worthless the Otterbox's built-in screen protector is (and how muddy it makes the screen look), and promptly ripped it out. I got used to carrying my Captivate in a Defender, so I was already used to the holstering/unholstering procedure. You do have to make sure not to rub your finger against the shell when using the fingerprint scanner, but it's a pretty easy technique to learn.
ive had quite a few of them there great for protection but forget using it with a dock
Zephyrs said:
They already have one for the Atrix....
Click to expand...
Click to collapse
Right but I am waiting for it to show up in a store here in San Antonio. No luck so far, hopefully this week.
The only dock I am interested in is the car dock. Will either of the Otterbox cases (defender or commuter) work with the car dock?
tonyantonucci said:
The only dock I am interested in is the car dock. Will either of the Otterbox cases (defender or commuter) work with the car dock?
Click to expand...
Click to collapse
No........
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
SquareBare said:
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
Click to expand...
Click to collapse
It shouldn't. Personally, I think the Atrix runs a little cooler than the iPhones and both my parents have the defenders for their iPhones and neither of them have had any issues.
HarleyDude said:
Right but I am waiting for it to show up in a store here in San Antonio. No luck so far, hopefully this week.
Click to expand...
Click to collapse
you can get it for $20 off on amazon unless you need to pick it up in a brick and mortar establishment
SquareBare said:
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
Click to expand...
Click to collapse
I don't foresee any heat issues whatsoever with mine. Gets slightly warm sometimes but nothing problematic. In ATL as well.
There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.
Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?
The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.
I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.
fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.
Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.
I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.
Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T
http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.
Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)
And what about silicone cases? Soft ones I mean..
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels
Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks
clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am
hard case with soft grip
or you can call it a "grippy" hard case
rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you
just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....
rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.
Good news for all you Proclip fans,
I just recieved mine today and it works with the Samsung Extended battery just as well as the standard battery. There is a 1/2 in space behind the phone that should allow for even the most extreme extended batteries to fit as long as the battery cover does not extend beyond where the original battery cover fits (like if it wraps around the side of the phone it will not fit).
I ordered Proclip part number 513331 (Hard wired install).
Proclip doesn't disappoint either, this mount is just as awesome as the one for my old DINC. Nice and sturdy.
I'll post some pics later when I get it installed.
As is typical with proclip mounts, the mount is designed based on the physical dimensions of the phone (specifically the sides of the phone) so cases that change those dimensions will cause the phone to not fit in the grooves correctly.
Pix of the proclip in action
Grabbed a couple of pics for anyone interested.
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
T-Keith said:
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I wont argue that they are spendy - I already had the base part but it's like $100 for both pieces for newbies.
But I do get something that no other mount has been able to offer me - this one is wired into the car, I can use only one hand to put my phone in it, and it doesn't fall or move when I press too hard. Considering the Verizon one is $40 and a POS it seemed worth the extra.
But yea if you have a case it's not so good.
does you phone fall if you turn the screen for navigation ?
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Should be good, as it is adjustable. I wish they made the sides of the powered mount adjustable...
juju2lose said:
does you phone fall if you turn the screen for navigation ?
Click to expand...
Click to collapse
Nope, it stays in there really well.
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Got mine a couple of days ago.
As has been noted, they come in two pieces. The piece that holds the phone is very, very nice and will definitely work with any reasonable extended battery. It's very snug, but not too snug, and the fit is perfect. I got one of the powered versions and it's fantastic.
The car mount piece, for me, is of similar quality. The fit is near stock and the thing is damn near impossible to remove.
As a unit, the two pieces are rock solid.
Highly recommended. I wouldn't hold out for the Samsung three pin holder. I had that same holder (minus the three pins, obviously) for my Nexus S - and this one is far, far, far better.
roachdabug said:
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Click to expand...
Click to collapse
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
roachdabug said:
the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly.
Click to expand...
Click to collapse
That's what I had to do for my wife's Civic. She got the car mount that affixes to the center console and that one piece of double sided tape just wasn't cutting it. I used a heat gun to remove the factory tape and then liberally applied tape to all parts contacting the console. It's been holding steady for over a year.
Proclip should probably give people more sticky tape - but I think the reason they only use a single piece is because they tout that the proclip doesn't damage the car and it could be argued that uber liberal amounts of double-sided sticky tape could potentially damage some surfaces. In the civic it’s all plastic so it’s NBD to use a heat gun and remove any residue, but if was a BMW with an oak dash then I could see people complaining.
dgwood12 said:
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I don't think any case would work with the proclip because it is a very snug fit and yes it takes a fair amount of pressure to put it in. Not so much that it will move the dock but certainly enough to keep the phone from coming out accidentally.
The only reason the extended battery works is because there is nearly a 1 inch opening behind the phone and the battery cover does not extend to the edge.
Yes the headphone jack is open but you would need a connector that is straight. A 90 degree connector would not work.
Ok, so I just received my Titan Aegis case. Sorry, no pics as I don't own a camera other than my N5, and it can't take pictures of itself . Initial thoughts are:
Fitment- Not great. Definitely not as clean as the Otterbox Commuter or Defender on my Galaxy Nexus. I also have a gap at the top as the rubber won't completely slip into the plastic.
Feel- SLIPPERY. If there wasn't some rubber to grip on to on the sides, this thing would go flying out of my hand constantly.
Looks- Decent. It's not a bad looking case, not as bulky as an Otterbox. Doesn't add too much to the thickness of the phone, nor to the height.
Will it last?- I think this case could withstand a pretty decent fall. The rubber is fairly thick, and the plastic would probably take the brunt of the impact.
Million dollar question: Is it worth the money?- If the case fit properly, yes. I'm going to have to contact Trident to see if they can do anything about the gap at the top. If not, then no, it is not worth shelling out that money for something that won't fit the way it is supposed to. But since Otterbox has no plans for a case for our lovely phone, I don't see us having very many choices if you need a fairly rugged case. I'll keep this up to date after I get in contact with Trident and maybe try to get some pictures posted up.
I'd check to make sure all the rubber parts are popped into place. I had a gap at the top as well until I made sure all the rubber was all snug everywhere else(camera/flash, sides, etc.), then all the gaps went away and it fits perfectly. Much better than any Otterbox I've ever owned.
tyler.durden said:
I'd check to make sure all the rubber parts are popped into place. I had a gap at the top as well until I made sure all the rubber was all snug everywhere else(camera/flash, sides, etc.), then all the gaps went away and it fits perfectly. Much better than any Otterbox I've ever owned.
Click to expand...
Click to collapse
I tried fitting and refitting multiple times and can't get it to close up. I contacted Titan for an RMA so I'll just have to wait and see what happens with the new one.
t1.8matt said:
I tried fitting and refitting multiple times and can't get it to close up. I contacted Titan for an RMA so I'll just have to wait and see what happens with the new one.
Click to expand...
Click to collapse
I used to have the same problem with the case, but as the guy mentioned there is a specific way to add the hard shell. What I did was, instead of beginning with the power button side, I started with the volume buttons side. My gaps are closed, so it's not a flaw, just most of us were doing it wrong.
enriquelabrada said:
I used to have the same problem with the case, but as the guy mentioned there is a specific way to add the hard shell. What I did was, instead of beginning with the power button side, I started with the volume buttons side. My gaps are closed, so it's not a flaw, just most of us were doing it wrong.
Click to expand...
Click to collapse
Huh, that actually worked. No more gap. Guess I don't have to exchange it after all. Thanks!
Bought this case new from ebay knowing about its few problems being reported like the proximity sensor, call problems, and audio issues, but still preferred this over the lifeproof simply for its protection. When i first received it, my initial reaction was "wow, its here, and its HUGE!" But i carefully disassembled it and clean it out just in case, water tested it (passed), dried it off, and finally put my phone in its new suit of armor. It really made the phone huge, and i mean huge, but i honestly dont mind the added bulk because of its substantial protection and it still feels very comfy in hand and doesnt hinder the phones functionality at all. Speaker for music also plays very loudly and crystal clear unlike other reviewers have stated. I think its a great case to buy and kind of essential if you have a very physically active life. Now to the cons (although their aren't many): Unlike many other reviewers of the white version have stated, i dont have call proximity issues, only thing that happens related to proximity is when i turn the phone over to face down while playing music, it pauses, but thats expected because i had that motion option enabled. Next, phone calls work fine and i hear people just fine, but the caller on the other end may have a problem hearing you sometimes. But it rarely happens and most times they can hear you. Easy fixes are bluetooth and earphones. Lastly, the home button definitely requires more pressure to press and the menu/back "buttons" are a little harder to get to but you'll get used to it. Thats the only thing "wrong" with this case honestly and its still excellent to have. I would highly recommend it. If you dont mind a little bulk, get it. Again, great great case :good:
I have a brand new one in original packaging from otterbox if anyone wants, contact me through dm or 6785162209
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing. There are many surface scratches on the screen which you can only see if you look at it while the screen is off under a super, super bright light. Doesn't affect the image quality at all. Outside frame (the gray part) is a little cracked in few places. Not a big deal.
Runs flawless on CM 10.2.1. Undervolted almost 100mV across the board.
I used to be OCD, but decided to save my health instead.
Aftcomet said:
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing.
Click to expand...
Click to collapse
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
bogdaryl said:
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
Click to expand...
Click to collapse
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
aybarrap1 said:
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Fair enough. I suppose we don't always have ideal circumstances to our liking.
NexusS4gFreak said:
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-T999 using xda app-developers app
Aftcomet said:
Fair enough. I suppose we don't always have ideal circumstances to our liking.
Click to expand...
Click to collapse
LOL...I love my phone being slim and I can live with scratches. But after a few near misses with my toddler son and getting soaked a couple of times on the job, I decided I would have to give in. Bring without my phone even for a day would screw up my schedule. Amazing how much I depend on it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
D00ky said:
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
Click to expand...
Click to collapse
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
For everyday protection sure it may be good, but when it comes to 10ft drop, water, being hit, stomped on, and numerous other things, the armor case is the best.
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
NexusS4gFreak said:
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
Click to expand...
Click to collapse
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
D00ky said:
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
Click to expand...
Click to collapse
I finally got 2mm foam as 1mm is hard to get. 2mm foam goes into gaps between ribs on the rubber on the back cover of the case. So this just might do the trick as the case closes ok.
The for the review, I have an Otterbox Defender and love it to death, but I've been thinking of buying one of these.
i have the Acase Superleggera Pro Dual Protection Case on my S3 and it is great!
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
DMF1977 said:
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
Click to expand...
Click to collapse
Not sure but I think that there's no fakes around. Enjoy it.
D00ky said:
Not sure but I think that there's no fakes around. Enjoy it.
Click to expand...
Click to collapse
Thanks!! But I'm sure there are plenty of fakes around...