This case is very nice. Especially for the price of under 15 bucks shipped. The leather is very soft, almost feels real haha. Might be... The clips are very secure, they do not block any ports, speakers etc. There is a nice "friction" styled clip that holds great closed. The different angles for viewing the tab are great too, very solid "lock up". The interior material is soft too.
In the end, you cant go wrong with this case.
http://www.amazon.com/gp/product/B005G19P7M
Not for Italy....thank you amazon!
I got it for $10 shipped from Amazon, and they are offering to refund the whole thing if you leave a review.
I don't think they are doing it anymore...
Sent from my Galaxy Tab!
I got my case yesterday, been waiting since August 24th or something for it lol. It was on backorder, but I got a paper saying if I did a review (not a 5 star.. I says just a review) I could get a refund. I will say I like this case a lot better than the Samsung one, for the main reason it has more angles. It does feel a bit more rough on the tab, but I like how all the ports/buttons are showing.
If you just need a case to hold your tab at angles while you use it, I think this is the cheapest case out there for it.
The Samsung official book case is very very nice, and super thin. But the viewing angles are horrible. I have this case on the way and will be going with this one for sure.
I just got a Galaxy Tab last week (gift from awesome girlfriend...) - ordered a 3 pack of screen protectors (Acase, not too bad) and this case on Amazon.
Ordered the case on Thursday, had it by Saturday (Amazon Prime). Looks like some people were waiting quite a while to get these.
I was hoping for a case that was made of fairly tight leather... you know how some cases look cheap because the leather is very poofy, has a lot of extraneous padding in it? So, this case still retains a slim sleek look, like a nice portfolio.
I like the microfiber inside with the three grooves for leaning the device into.
I wish the clip that held the case closed was like 2mm longer so it really reaches around the corner of the device and clips in solidly. It's held closed pretty well, but I've been bending it a bit to make it clasp just a bit tighter.
There's a little embossed viper logo on the front... some other brand on Amazon, equally cheap, had the Samsung logo on there.
In all, pretty great case for about $15 shipped.
The card I received in my package did instruct me to write a five star review for them, but DID NOT mention anything about getting a refund if you do so. I would say don't buy expecting to get it for free
I also just recieved this case. It's pretty slick, way better than the cheap eBay case I was using before (which cost twice as much.) Only complaint is that the case was mighty stinky to begin with, but its fine now.
this case is awesome and is way better than the official Samsung one. it did cause the newton ring, but I got rid of it. going to see if this trick works to keep the ring off.
This case is just superb for the price.
Sent from my GT-P7510 using xda premium
This case has been reviewed several times, although under different names. Search for "clip case." I got it free (after the refund). For me it's the best case on the market right now.
just ordered one of these just to have another spare. 15 cases to my collection. i really need to stop. this is getting ridiculous. lol.
Hahahah! You, sir, have what we call a case-by-case addiction!
These are exactly like the Pyro one you reviewed a while back. Can't beat the price though.
I agree, it's like the Pyrotek case. It looks a bit on the cheaper quality side, but I got it because I was tired of the wonky angles the official case was giving me.
mtran2988 said:
I agree, it's like the Pyrotek case. It looks a bit on the cheaper quality side, but I got it because I was tired of the wonky angles the official case was giving me.
Click to expand...
Click to collapse
So the only difference between this case and the Pyro case is that this one feels cheaper? It feels pretty nice to me. The price is just untouchable though. lol
I always wondered what the difference between this and the pyro case was.
yeah haha I dont know how come can consider this cheap lol price yeah but quality? Its pretty much to go to case for the tab. Its 15 bucks shipped, looks great, feels great, quality and craftsmanship is nice too.
Its just another case with the crappy stand design. Its not worth it. Look at the massive foot print it has when in stand mode. How can you use the device on your desk when the bottom case sticks out at you like a sore thumb. Very annoying.
Evan2ac said:
Its just another case with the crappy stand design. Its not worth it. Look at the massive foot print it has when in stand mode. How can you use the device on your desk when the bottom case sticks out at you like a sore thumb. Very annoying.
Click to expand...
Click to collapse
It's a case and not a dock, dork.
If only there were an easy way to get one of these in Australia We need a bloody Amazon Australia quick smart.
mroneeyedboh said:
yeah haha I dont know how come can consider this cheap lol price yeah but quality? Its pretty much to go to case for the tab. Its 15 bucks shipped, looks great, feels great, quality and craftsmanship is nice too.
Click to expand...
Click to collapse
I made my assessment from looking at task650's review on the Pyro Skin case.
When I look at my case, the clips that hold in the sides of the tab have so overlapping of the material (which I just trimmed off) the material that the tab stands up on for the angles has this grainy look on it, whereas on the pyroskin one, it looks smooth. There's the little notches on the 2nd stand that the pyroskin case has, that looks like it may promote a tighter close, where on this case the side clips just press onto it. Although all these observations could possibly be exclusive to my case.
That's what I made my observations on. I'm not saying it's a POS... because it's not; i'm just saying the quality LOOKS a bit on the cheaper side... which is fine by me because it was cheap as hell and it does it's job awesome.
Related
So the first thing I noticed was that this is not a slider, but a front-and-back snap case. The product description says "Unique snap together design and opening slot makes putting on and removing your case easy" but for some reason thought it was a slider like the Surface II for the Captivate. So, it's not their fault I misunderstood.
Since the front bezel cover is so thin, my initial impression is that it seems a little flimsy. The back cover is also quite thin and has no lining like other Seidio cases. I think this was a conscious decision in order to keep the case as slim as possible. The fit is quite precise, so I don't think the lining would really make much difference as there is no movement within the case.
Although the front bezel piece seems flimsy at first, it feels quite sturdy once you snap it to the back cover. I do have some concerns the clips that snap together will wear down over time if you remove the cover frequently. Only time will tell on that point.
It has Seidio's "signature soft touch finish" which is like a somewhat rubberized matte texture. It's quite nice, but attracts prints if you have oily fingers.
Overall, the fit is pretty much perfect and the cutouts are precise. It's very thin and has a nice texture. Of the six cases I have, it's certainly the nicest. It does, however, cost about as much as the other five cases combined - $29.95.
At $19.95, I'd probably recommend it in a second. At $30 I have some reservations, namely the long term durability of the clasps that keep the two pieces together.
Vibrant case wont work
should be gettin mine tomorrow....
i think they have 6 month warranty which actually does work. thats another big plus with this company.
kolyan said:
i think they have 6 month warranty with actually does work.
Click to expand...
Click to collapse
Good to know. Hopefully won't have to use it.
Thanks for the review.
I'm still sticking to my white mesh case. I like really light and almost-not-there type of cases.
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
s15274n said:
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
Click to expand...
Click to collapse
For reference, I've had TPU's, hybrid TPU/Plastic (the one with hard clear back), a generic version of the Barely-There, and a flexible plastic perforated case (XMatrix Cover from DayDeal).
The added size and weight is similar to the XMatrix perforated case. It's not as slim as the Barely-There style cases, but I think it's definitely lower profile than TPU or silicone.
The finish is nearly the same as the Barely-There knock off I have, but seems a little more durable (the coating on the old case started to come off within days). It's smooth, almost suede-like, but has a bit of tack when held in the hand. When put on a smooth surface, like a desk or on wood trim in a car, it does not stick at all. This is a bit of a negative for me. One thing I like about TPU cases is that they kind of stick when you lay them on a smoother surface (I usually put my phone on the wood trim next to the gear shift in my car) but are not tacky otherwise.
As for the volume buttons, mine are not loose so I can't really comment on that issue.
One other thing I've noticed in the last few days of using the case, is that bezel cover is attached to the bottom part in only a few spots so there is some give in the areas that aren't clipped together. I think they should have added a couple more contact points on each side. It's not terrible, but I'm a bit OCD so it probably bothers me more than it would most other people.
I'll report back, should be here anytime now.. thanks man.
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
kolyan said:
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
Click to expand...
Click to collapse
After waiting around for the SGP Slider, I was also hoping this would be a sliding case.
I did get to hold a Captivate with the Innocase II, which is a slider, and the fit was pretty awful. It moves around a ton compared to this front-back type. I guess I'll take this style and more precise fit over slider with a bad fit.
Is it the bump on the Vibrant that is the main issue with a slider?
I was a bit let down to find this was a snap on the front/back design.
new coupon good through Sunday: MIX15
buy 2 products and get 15% off, free shipping for 2010
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
djjeesh said:
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
Click to expand...
Click to collapse
it is nice and clean. my nexus one case fits better, but they probably had to make it clip-on design i guess for Vibrant bump
Nice review! I can't help but feel like Seidio threw this product together in a hurry, after they realized there are people with Vibrants. It just looks cheap compare to their other offerings.
Just got it. initial impressions:
1 feels great in the hand. Looks good too.
2 I absolutely hate how easy it un-snaps.
3 I want to know their return policy till they have a legit case like the ones I am accustomed too from seidio.
4 it's much more difficult to press power now.
EDIT: okay, found out how to do the return, just waiting to hear back from them.
does anyone know if seidio or otterbox have any plans on releasing a case for the trophy?
I just ordered one by Incipio. Hopefully it's pretty decent.
any update if you got your cases in. would like to know a good case.
I just ordered the Incipio Silicrylic case for my Trophy. I can't post the link to it because I'm forum n00b lol.
I'll report back when I get it, but there's a good chance I won't get it until I get back from taking a graduate course next week. I'm leaving on Sunday, and with the free shipping, it might not come until on Monday or later.
In my opinion it's on par with case manufactures like Seidio and Otterbox. This is my first Incipio product and i like it. Had it for over a week now. The silicone is nice and soft, doesn't attract too much lint or dust and it wipes clean better then other silicone cases. It's very tight fitting so theres no movement at all which is good when comparing to cases like the Seidio Innocase surface which will cause little micro scratches on your phone once dust or dirt gets between the case and the phone.
It also comes with a free screen protector which was a nice touch. Kinda expensive at $29 but definitely worth it to protect your investment. Free shipping was good, and it my case took 4 days to arrive from California to NJ.
Another thing to note is that the case definitely makes the buttons easier to press. They seem more defined now, volume buttons act like separate up and down buttons instead of one long rocker. Power and camera buttons are easier to find and press as well. The holes are also nicely designed for the headphones, mic and charger. Most hard cases I've used have slacked in that ares. the charger port is always undersized and most of the time requires you to take the case off to charge the phone.
I have 5 cases for my Evo 4G and if Incipio made a Silicrylic for that phone I would use it over the other cases i have hands down.
Thanks very much for the review and the pics! I'm also in NJ, and I ordered mine on Monday, so I'm hoping I get it by Friday then... I'm glad to hear the the buttons are more defined; the one review on their website said the same thing.
Looks good, think i might buy one. I usually dont case phones, but this one seems kinda hard to hang onto.
Okay, perhaps I'll get flamed for this because it does not fit someone's definiton of "quality" - but I wanted to share that I am blown away by the fit and quality of the Ebay $8.49 case I bought for my Trophy. It does in fact feel a bit rubberized and fits perfectly.
And - while playing, my son dropped the phone from about 3 feet, on the street. I heard the sound of something falling apart and had that sinking feeling. When I looked - the case popped apart, but the case and the phone are completely undamaged and after popping it back on, it is as if nothing happened.
I am okay with that!
The case I got was this:
http://cgi.ebay.com/HTC-7-Trophy-69...712636?pt=PDA_Accessories&hash=item43a77bbabc
I would hope there wouldn't be any flaming! That case looks good to me. I'm glad it worked for you in a time of need lol
I took a few photos so you can see the fit of the Ebay case I mentioned:
And the back:
I've always like the Silicrylic cases I've had for my other phones and since my local Verizon stores (corporate and agent) have absolutely nothing for the Trophy, I may bite the bullet and spend 30 bucks on the Incipio case. I just kind of wish the acrylic part came in different color choices for a little extra 'flair'...
Wow, I'm a dingbat. I see the different color options now... Not that many, I have to say. Perhaps I'm a little too anal retentive, but a blue on black color scheme would match my device theme.
Has anyone gotten anything from Boxwave? They seem to have some decent looking cases but they seem a bit steep. I've never had any of their products before so I'm unfamiliar with them.
diavolo770 said:
Wow, I'm a dingbat. I see the different color options now... Not that many, I have to say. Perhaps I'm a little too anal retentive, but a blue on black color scheme would match my device theme.
Has anyone gotten anything from Boxwave? They seem to have some decent looking cases but they seem a bit steep. I've never had any of their products before so I'm unfamiliar with them.
Click to expand...
Click to collapse
Yeah, I have purchased some power supplies and cables from them. It was all a decent quality product. I would buy from them again.
Just a heads up- looks like many of the other cases reviewed here but this one is only $10 shipped. I just ordered one; I'll review it when it arrives. 9 5-star reviews!
*Edit: looks like it's up to $15. Still, appears to be the same as the pyro case and a few others that sell for twice that.
http://www.amazon.com/gp/offer-list...-options=see-all-buying-options&condition=new
Wow, that looks almost exactly like the Pyro skin clip case that I just bought for $30 bucks. It's listed on amazon for $14.95+shipping now. How did you get it for $10 shipped? If the quality and build is anything like the pyro, I'd be intrigued
dhuangxda said:
Wow, that looks almost exactly like the Pyro skin clip case that I just bought for $30 bucks. It's listed on amazon for $14.95+shipping now. How did you get it for $10 shipped? If the quality and build is anything like the pyro, I'd be intrigued
Click to expand...
Click to collapse
looks like they upped it. It was $9.98 when I posted.
I think that the pyro case (and several others) are the same rebranded chinese thing. I really don't care, all I want is to pay less for it. At $15, it still beats most of the others by at least a few bucks. I'll review it when it gets here.
BTW- I'll update the OP with the price.
I bought this case from amazon for 9.98 shipped and received it in two days! They apparently had a promotion going because they refunded my money and let me keep the case for free in exchange for a review. Great case, great build quality and looks great!
This is the 3rd variation of the same case. I think it's all the same manufacturer just different distributors. I'm in!
Just got mine for 9.98 great quality and got it for free after I left them a review.
I don't know how everybody is giving this case such great reviews. Sure, it's cheap and does its job, but the quality is definetely not there. I got mine yesterday and the clips on the top seem somewhat uneven between each corner. Also, the case does not stay fully flat when holding the tablet opened in your hands. That's quite annoying and makes it basically unusable to me. The case also seems to bulge when closed due to the middle clamps holding the tablet; which, by the way, cover a bit of the bottom portion of each speaker.
For the price, I'd give this case 4 stars, but 5 stars is just too much. People are easily satisfied I suppose.
akarol said:
I don't know how everybody is giving this case such great reviews. Sure, it's cheap and does its job, but the quality is definetely not there. I got mine yesterday and the clips on the top seem somewhat uneven between each corner. Also, the case does not stay fully flat when holding the tablet opened in your hands. That's quite annoying and makes it basically unusable to me. The case also seems to bulge when closed due to the middle clamps holding the tablet; which, by the way, cover a bit of the bottom portion of each speaker.
For the price, I'd give this case 4 stars, but 5 stars is just too much. People are easily satisfied I suppose.
Click to expand...
Click to collapse
Look, I don't disagree that it's not perfect, but after owning many, many different cases for many different tablets, I have to say that this one is about as good as it gets for the price. The only cases I've seen that are better quality cost $50 or more. Maybe you got one that is defective; for the price that wouldn't surprise me. Get them to replace it. Also, please don't dismiss those of us that are happy with the case with "People are easily satisfied I suppose." That's rude.
BTW- I tried to figure out what you were talking about when you said "the case does not stay fully flat when holding the tablet opened in your hands" and realized the problem: you're not holding it tight enough. It's new material and needs to be conditioned. Squeeze it a bunch of times to loosen and crease the bottom edge.
I'll try to conditition it when I get home. Do you also notice a bulge when closing it from the middle clips?
does this case fit with an invisible shield by zagg?
jaewon223 said:
does this case fit with an invisible shield by zagg?
Click to expand...
Click to collapse
Yes. I have a clearprotector full body protector and it fits fine. So far no problem with it catching when I open and close the flap.
BTW- I think this is exactly the same case as the "pyro case" which has a huge thread here. Except much less expensive...
Please be honest guys, does your case stay flush when opening it 360 degrees without pushing it against its back? I find this highly annoying. I've been trying to break the leather all day and have had no success!
Also, anyone else here find that the locking flap marked their tablet over time? I'd hate for that to happen.
Thanks in advance...
shigga said:
Just got mine for 9.98 great quality and got it for free after I left them a review.
Click to expand...
Click to collapse
how u do that? i just order mine
akarol said:
I don't know how everybody is giving this case such great reviews. Sure, it's cheap and does its job, but the quality is definetely not there. I got mine yesterday and the clips on the top seem somewhat uneven between each corner. Also, the case does not stay fully flat when holding the tablet opened in your hands. That's quite annoying and makes it basically unusable to me. The case also seems to bulge when closed due to the middle clamps holding the tablet; which, by the way, cover a bit of the bottom portion of each speaker.
For the price, I'd give this case 4 stars, but 5 stars is just too much. People are easily satisfied I suppose.
Click to expand...
Click to collapse
I received my case with a note that said if I left a 5-star review I would be given a full refund, thus getting my case for free. I'm assuming that's why it's getting so many 5-star reviews.
akarol said:
Please be honest guys, does your case stay flush when opening it 360 degrees without pushing it against its back? I find this highly annoying. I've been trying to break the leather all day and have had no success!
Also, anyone else here find that the locking flap marked their tablet over time? I'd hate for that to happen.
Thanks in advance...
Click to expand...
Click to collapse
My case doesn't stay flush (if you mean folding it completely back like a magazine?) but neither did my belkin ultra thin folio. I believe its because of the design. The only way I can see it staying flush is if the material used was very pliable or there was a hinge (kind of like a notebook with rings).
Also, I too felt that it might scratch my tab with the front clip, but so far it hasnt. Overall, its a good case and in some aspects better than the belkin ultra thin folio.
Yeah, it's growing on me. I do wish it stayed more fluch when fully opened. I feel they could have made the flap holding both parts together a bit longer to allow that to happen.
I'm going barenaked with the tablet on this thing. I really hope it doesn't scratch the edges of my tablet. I have been puyshing the locking flap a bit outward so there's not much resistance to close it. Seems to help a bit.
vuabip00 said:
how u do that? i just order mine
Click to expand...
Click to collapse
I got a letter shipped with mine that basically said to do a review for the case and rate it and my payment would be refunded. Wrote the review and was refunded the next day.
gah so frustrating!! amazon doesnt ship to nz....sigh sigh.....
What on earth would make this case incompatible with the verizon version of the tab? Something in the case blocking the 4g signal?
Buji said:
What on earth would make this case incompatible with the verizon version of the tab? Something in the case blocking the 4g signal?
Click to expand...
Click to collapse
Uhhh... what about the different position of the buttons on the LTE models? Look up the user uploaded photos on the Amazon description of the Pyro Case.
Check this one out:
http://www.bodyglovemobile.com/prod...ade-case-black-with-hideaway-stand,333,19.htm
And is cheaper here:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28550
Doesn't look like it protects the top or bottom though.
Just got one on eBay for under $18 and free shipping. Should get here by next week. I will post a quick review after I try it out.
I wonder if there the same as the tmobile version they have a few cases
do not like it standing straight up.
smcf81 said:
do not like it standing straight up.
Click to expand...
Click to collapse
Thats not what she said...
I just picked up one of these a couple hours ago at a local sprint shack. I do wish it had a bit more coverage, specifically top and bottom. But I've found (through multiple drops already) that the phone itself is pretty sturdy, it's just that the battery cover pops off way too easy, which usually equals battery popping out as well. So this case will do what I mainly want, which is to keep the battery in And I think the kickstand will be useful!
i just saw one hands on for a co-workers phone. i actually like it. found it on amazon for $15.93 (free shipping) and ebay for $13.99 (free shipping). i like the white case-mate pop, but this seems a bit thinner with a better kick-stand.
Just bought one off ebay for 13.99. I have the pop case which I like, but it is too thick
I ordered mine from Amazon, $13.26 with free shipping. will give feedback once received.
Got mine the other day (my 7th case for the touch...). It doesn't cover the top or bottom very well but it is thinner than the casemate pop case. If you want thin and a kickstand, this is the way to go.
Like mine, it stands up fine on its side (landscape).
I wish there was a non-textures version
mine arrived yesterday and so far I really like it. was surprised at how nice it looks too, very sleek but still the manly style. the kickstand is sturdy and due to the size, my phone still fits the same leather holster and the garmin windshield holder.
KaliS-Pugilist said:
mine arrived yesterday and so far I really like it. was surprised at how nice it looks too, very sleek but still the manly style. the kickstand is sturdy and due to the size, my phone still fits the same leather holster and the garmin windshield holder.
Click to expand...
Click to collapse
Which holster are you using?
Digitalthug said:
Which holster are you using?
Click to expand...
Click to collapse
this is the exact one I'm using... will likely always use this brand as they make good quality products.
http://www.amazon.com/gp/product/B002QQED5O
they have it in all black as well, just search around on Amazon.
This case also fits in the seidio surface holster as well.
FYI for anyone interested in this case. I just ordered one on ebay for $8.99 with free shipping. It is on "Sale" from $9.99 for the next 6 days (until 12/19/11?) according to the ebay post.
Just search on ebay for "Body Glove Samsung Epic 4G Touch". The pic shows the gray version but the model number is correct and it only comes in black for the ET4G.
I got the cibo s case but thinking maybe cancel that and get this. how much thickness does it add?
I just got this case yesterday, and so far I'm pleased with the sturdiness and build. It does add some bulk to the back of the phone. On the phone without a case, the bottom back of the phone sticks out more versus the top of the phone. With this case, it now has a flat back with a little more girth. That will give you a sense of how much thickness the case adds to the phone. Hope that makes sense.
I do wish this case was a little grippier (if that's a word). Still a little slick in my hands, but easy to get in and out of my pockets. Overall, I'm please with this case, especially for the price. My main thing I needed in a case was the kickstand. My son watches shows on my phone when we are out and it makes it so much more convenient with this case.
gadog98 said:
I just got this case yesterday, and so far I'm pleased with the sturdiness and build. It does add some bulk to the back of the phone. On the phone without a case, the bottom back of the phone sticks out more versus the top of the phone. With this case, it now has a flat back with a little more girth. That will give you a sense of how much thickness the case adds to the phone. Hope that makes sense.
I do wish this case was a little grippier (if that's a word). Still a little slick in my hands, but easy to get in and out of my pockets. Overall, I'm please with this case, especially for the price. My main thing I needed in a case was the kickstand. My son watches shows on my phone when we are out and it makes it so much more convenient with this case.
Click to expand...
Click to collapse
just got the body glove case in the mail, the kickstand is a really useful feature but I feel the cibo s case offers much better grip since it has a cross hash pattern on the edges. I say protection wise it's better also because the top/bottom are not open (and I suspect if the phone were to ever fall, it would pop out of the body glove). the extra thickness is not a problem though.
When I ordered my official Google Nexus 5 Bumper in Red I was more than excited to have an official case I knew I wouldn't have any problems with.
Upon opening I loved it. The red bumper on my Nexus 5 looked fantastic! I was thrilled that I was going to be carrying it around now.
First:
It fits perfectly with the buttons on the sides as well as cutouts for speakers and buttons. There's no doubt about it, although the buttons may be a a little harder to push at first, due to the case's button popouts being rigid, you can quickly get used to this and it isn't a real problem. The cutout for the speakers don't seem to limit the sound at all, so that was all good. And the cutout for the charging port fits most chargers without any issue. I only had an issue with one of my cables that has a huge plastic piece around the micro USB metal piece, but it wasn't made for the Nexus 5 so it doesn't really affect my opinion of the cutout. Plus it works with wireless charging, so that's a plus. The cutout for the headphone jack fit all my headphones perfectly, even ones with the L-shaped jack, so I was happy with that as well.
Other than that, I loved the relatively slim design of the case as well as the nexus logo on the back. I can noticeably feel the case's added width when I take it off, but it isn't a huge difference like many other cases may add. So it keeps the device still relatively slim.
BUT I WAS DISAPPOINTED after I put it on and started assessing the actual fit. I thought it would be a harder material. Although it "snapped" on perfectly, the case was loose around the top and bottom.
On the top:
The case could be pushed in, to where it would make a sound from rubbing on the Nexus 5. I adjusted the case and put it on again but nothing. It almost felt like the cheaper silicon cases bought for devices that eventually warp and don't fit properly. This is extremely annoying (at least for me) because I expected the case to be a perfect fit on the top and bottom without me being able to push parts of the case and have them move, or make a rubbing sound.
On the bottom:
The same thing occurred. The small piece of rubber above the charging port (closest to screen) is very flimsy. I noticed wear from two days of use. This involved taking it out and putting it in my pocket. My pants aren't tight so it wasn't a squeeze. It came from me grabbing the case right above this small piece of rubber and pulling it out. As with the top, I can push this piece of rubber pretty easily and have it move in and out (or up and down, however you want to say it). It seems it will continue to get looser until it is warped a bit.
Overall:
I was disappointed with the case. I contacted Google and as per their return policy they offered a refund without returning or swapping the case. The top and bottom "mis"-fits really killed the excitement for the case. With the top being able to be pushed in AND making a rubbing sound, it irritated the crap out of me. And with the bottom rubber piece over the charging port being flimsy and possibly warping JUST from everyday use of the case, I can't love the case like I wanted.
Last thing:
Anyone else have this issue? Or any other issues? When I read and watched multiple reviews, none of them seemed to show all of the bad things I found with my case. So part of me thinks it may be just mine. I am considering ordering another with the refund offer but I am hesitant to spend money on another and have the same results.
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
same here. it works perfectly with my phone too. no loose top or bottom areas here. i don't know about slim but it is handy and gives a good grip. also the charging point rubber you talked about? for me it's a bit tight fit for the charging pin but it just gives way when pushed with a bit of presssure and comes back when pin is removed. otherwise no problems for me with this case and i'm pretty satisfied.
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Where did you get it ?
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
wolfen69 said:
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
Click to expand...
Click to collapse
Are they really the same quality ? And if they are would you post a link too ?
Vanilla Pudding said:
Are they really the same quality ? And if they are would you post a link too ?
Click to expand...
Click to collapse
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
wolfen69 said:
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
Click to expand...
Click to collapse
Can I buy from eBay with something other than PayPal ?
Vanilla Pudding said:
Can I buy from eBay with something other than PayPal ?
Click to expand...
Click to collapse
Do you want me to hold your hand? Figure it out.
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
ToZoX said:
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
Click to expand...
Click to collapse
I haven't received them yet. Will let you know as soon as I get them. Shipping from China takes a while.
I got a red one about 3 weeks ago.
It started peeling (sort of) at the corners within 10 days, black material was showing up.
Upon removing the case, I discovered that it left long marks on the rubbery back of the black Nexus 5, along the ridges of the bumper.
Thats when I decided to sell it off.
Simply put, it looks awesome, fits awesome, but as a product, its bad, and not at all worth the money.
Atleast those marks are slowly dissappearing (Trust me, those arent dust or something)