Develop Bugs

Case Mate Barely There review

Photos at the bottom of the post for those looking to get straight to the phone p0rn
When I got my DINC2 the VZW rep was "nice" enough to throw in a silicone case for free. I say "nice" because silicone is made for bakeware and o-rings, not phone cases. I was pulling the case off the phone as I walked out the door and it got ditched in the first trash can I saw.
I set out to find a case based on some specific requirements:
Thin and light
Grippy exterior
Excellet camera lens protection
The last one is really important and I'm surprised more folks don't highlight it in case reviews, especially for HTC phones. As anyone who owned the original DINC will tell you, HTC loves to leave their camera lenses flapping in the breeze where any hard object passing by can scratch/crack/smudge it.
My DINC wore a Seidio Surface case from day one and it was phenominal but with the DINC2 being slightly larger the Surface seemed to add more bulk than I was willing to stick in my pocket. I had read about the Incipio Feather case here on the forums and ordered one based on other's experiences. I was extremely disappointed when it arrived already broken still inside it's packaging. I returned it but the seller took six weeks to send the replacement, so in the meantime I got the Case Mate.
Once I had both of them in hand I was surprised at how different they were. It's the same basic design, a super thin case that wraps around the two sides and the four corners leaving the top and bottom exposed. What struck me was the difference in materials. The Case Mate was noticeably more rigid, fit more tightly and the "soft touch" surface was more grippy. The Incipio was certainly a quality case but the Case Mate just felt better.
Lastly, to the point of protecting the camera, the Case Mate takes the cake. The Incipio adds pretty much nothing in terms of shielding the camera but the Case Mate has a deliberate lip which gives the camera 2-3mm of setback. When you put the phone down in the Incipio case the lens still touches the table which means if you put it down on something less forgiving you're just asking for lens damage. The Case Mate's lip puts some distance between the lens and whatever you put it down on. When you take into account that your phone spends a great deal of time in your pocket, along with change/keys/etc the Incipio offers pretty much no protection to what I would call a design flaw on HTC's part.
In the end I'm glad I didn't pay for the Incipio (the seller refunded my money and let me keep the case to avoid negative feedback for the six week return delay). The Case Mate is a fantastic minimal case for the DINC2 that adds very little bulk, makes the phone easier to grip, protects the camera really well and feels much more durable than a 1mm thick piece of plastic.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Cool review thanks. Still just waiting for my red or white battery cover so I can show it through my Griffin Reveal look alike case
Sent from my ADR6350 using Tapatalk

I got the Innocase Surface, I really like it. Viewing from the pictures it looks like the casemate is abit thinner but not by much. I was considering the Casemate but I wasn't too sure how much I wanted a case that doesn't really protect the bottom or the top faceplate. Glad you enjoy the case though!

After spending some more time with the Case Mate I've discovered what might be it's only flaw and frankly I don't think I completely blame the case for this one.
The power button on top of the phone is already pretty minimal but with the case it's just slightly harder to actuate. The case comes up close to the button and stands off from the phone about the same distance. That means the button is pretty much flush with the case.
Now Case Mate didn't design the phone to have a slightly-too-small power button (I don't care for it even without the case) but they might have considered leaving a bit more clearance to make it a little easier to press.

Cool review. Incipio Red feather user here. I posted my review on Amazon.com, mine is the only review that's posted there. I've been very happy with my Red case as it is my favorite color and it is the thinnest out there(1mm).
I have to disagree with your comment on camera protection, the incipio feather has an ample lip which covers the camera. The only thing you can expect from these thin case is to have just a tiny lift off from surfaces and the feather gives the lift. I honestly do not see the point of thicker lip because it literally does nothing more than just a slightest lift off.
However since I've never touched the Case Mate Barely There, I have to take your words on the material. I wish they make more bright colors.

Very nice review! I went with the CaseMate as well and I really like it for easy pocket carry. I had the same concern with reduced ease of access to the power button, so I did a quick mod on mine with a Dremel wheel. I will probably go back and clean it up so it doesn't look so angry-beaver-ish but it is really nice to use with this tiny modification and with the change it truly lives up to the "Barely There" name.

If rooted I can MOD your ROM to make it so you can pull the phone out of sleep with the volume keys, that seems to be working for me.

nice review. I am catching this thread a little late I know but the aspect I dont like about this case is I dont see much protection for the screen in the event of a drop. I would never think that would be an issue but two days ago my Dinc2 feel out of my bag as I was putting it in my car and landed face down flat on its screen and shattered the screen. Had to dish out the deductible for a replacement. Now I am using a TPU case as is has just enough lip to protect the screen if it happened again.

I want a case similar to this, but it just doesn't protect the screen enough.

Very nice Tridea case

I've searched high and low for a case that suited me and my Note and eventually found a very nice case from Tridea on eBay. I received a couple of days ago and think that it looks and performs great. You can find it by searching on Tridea.Essentially it's a hard bumper in a nice sort of faux suede flip case. I went for the gray version.
It's a bit pricey at £25 and it took a couple of weeks to arrive from South Korea but I've yet to see a case that looks anywhere near as good for the money.

I just bought one too! It should arrive within a week, I got the same color as you did. I'm glad you like it, because it makes me more excited to get mine

I wanted this case more than most others but my number one issue with them all is that very few have a cut out for the ear piece!! not even a notch, i want my face oils off the screen and not have to hold the flap back on a call, simple design i would think, sigh.

I love this case, I bought the grey one as well. I do wish it had a hole for the speaker though.
Sent from my GT-N7000 using xda premium

Hmm, the front flap does fold round the back when using it to make calls and even gives a bit more of a better grip on the phone so I'm not that bothered about it not having a notch for the earpiece.
lamou1nr: As far as a hole for the speaker goes, it's got one but I guess you meant the same as Mrglass86.
I like the case because 1) it looks good 2) it's very light 3) it offers good bumper protection with the addition of a cover for the front that also keeps the screen clean. 4) it feels really nice and solid without adding a load of bulk to the phone.
I don't see the fascination with the aluminium bumpers. They don't look as though they'd offer any protection in a drop.
I like some of the Zenus cases (it was either the Tridea or the Zenus Capsule case) but they're expensive and the diary types just seem like a bit of a gimmick - would you really keep your cash and cards in the same case as your Note? Not me!
Until otterbox or a similar maker comes up with a really tough aluminium case I'm happy to stick with the Tridea.

If you fold it too often it will eventually get loose or have lines along the edge. Another issue with all such book-like case is that we cannot use our thumb to operate the phone anymore.
Sent from my GT-N7000 using XDA App

Just ordered it. I hope it'll arrive sooner than expected.

Anybody bought this kind of Tridea case? Available on eBay for $22.
http://www.ebay.com/itm/Tridea-Rubb...733?pt=LH_DefaultDomain_0&hash=item1e6b5965b5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Wow I dont normally like flip cases but this one looks very nice. Not sure if i'll fork out for one as i've already got cases for it but can you guys post pictures when you get it, i'll get a better idea than from the ebay pics

Just thought I'd follow up on my OP. I've been using this case for almost a couple of months. The phone gets a lot of use by me and is constantly being taken in/out of my pockets. I'm happy to say that the case is holding up well. I think that the 'spine' of the cover would be the first part to go since it's the part that gets the most stress.
After two months the fabric along the spine has been smoothed but doesn't look bad, kind of what you'd expect really, it 'weathered'. There is some very thin rubber edging that runs along the edge of the whole case and this has initially split on the spine hinge area but it has only come off in one tiny section. It's hardly noticeable.
The main thing is that it's protected my Note very well. I don't expect a huge lifespan from it (at least the cover) but the bumper around the note will last. I may utilise a bit of gaffer tape to strengthen the spine and you could do this without spoiling the aesthetic if you do it properly. I may also use some rubber spray that I bought from Amazon which is really useful stuff (it coats whatever you spray in a matt rubber coating). One last thing to mention is that some people were bothered that you couldn't get to the volume controls while the case was shut, well you can press the rocker through the spine without any problem so you can use the volume control even with the Note in your pocket. I'll update this if I notice anything further degradation but all-in-all I like this cover a lot still.

My case has also held up reasonably well. It provides great protection. I too had the rubber on the edge ware off but only on the "hinge" of the cover. The only other part that is showing signs of age is the metallic plastic piece that is on the back, it has a few scuffs and a chip. For a flip case this is one of the best.

Seidio ACTIVE Case REVIEW

I received my Seidio ACTIVE case the other day so I figured I'd do a little review on it.
First and foremost, the case arrived in a little box, decently packaged and the item didn't have any damage. Since I live overseas ship times can be quite ridiculous, but the package arrived 9 days after placing the order (that's pretty fast for me, seriously)
As you can see, not a whole lot of packing material but it really wasn't needed. The SURFACE I accidentally ordered was in a little smaller inner box and there were enough packing peanuts to keep it secure.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Case front:
Case back:
View of the kickstand extended:
The phone sits at approx a 45 degree angle when the kickstand is extended:
The phone does NOT sit flush on its back due to the kickstand. There's a slight gap and the back is raised just a little bit. Might drive some people crazy:
Front shot with the case on my S4A:
Side shot of the phone next to the case to show how much bigger it will be:
PROS:
1. If you've used one of these before you know what you're getting. The case fits pretty well and the back hold the silicone case on just fine.
2. The kickstand works ok, I wish it were in the middle of the back but for the most part it works fine. It does tip over if you touch the left side of the screen though, I don't see myself using this for anything more than viewing videos. The stand is held in place with a little magnet and it's spring-loaded, it pops out with a small bit of force (nothing crazy) and is held by the magnet just fine.
3. When faced down on a slick surface it doesn't slide around easily. The silicone holds it in place (might be a negative for some)
CONS:
1. I think Seidio made their silicone softer for some reason. I have an iFail 4 with one of the CONVERT cases and I was highly impressed with the quality of the silicone case (not the phone, but that's a different story/review). The silicone on that case just seemed to be a bit more 'firm', it did not slide off the sides/top nearly as easily as this case does. I also have a Nexus 7 with the ACTIVE case and I have the same complaint. I thought the smaller profile phone case would be better (since the Seidio cases for other tablets have the same complaints) but it's not. It comes off the top/bottom with barely any pressure. It goes right back into place of course, it doesn't come off the phone without removing the plastic back, but it's still annoying to me.
2. The kickstand does not work in portrait mode whatsoever. I personally don't care but I call it a con since I know quite a few people like to view in portrait mode.
The protection is there and I'm satisfied so far, much more than I was with a TPU case as far as protection/drop resistance goes, but the soft silicone annoys me a bit. I'm afraid that it'll stretch out like the Griffin case did on my wife's iPad 2 and sag after a few months. My wife also has a S4A, right now she has a Tudia Melody case and I was going to buy her one of these ACTIVE cases but I think I'll wait.
All in all I give it a 7/10. I'm just not confident in the silicone being so freakin soft and holding it's shape after a few months, especially for the $40 it cost me.
ETA Nov 26 2013: After a few weeks I have to downgrade my score to a 4/10. The power button is entirely too easy to press and hold while in my pocket, it's contently turning my screen on and it'll type in random pin codes OR hit the emergency contacts. If the power button is depressed for 10+ seconds it restarts the phone. Is been happening quite often while in the case and never while in my Supcase.
Also, while the silicone hasn't deformed or lost its shape the fact that the top and bottom slip off extremely easily bugs the crap out of me.
For an expensive 'rugged' case these flaws are extremely annoying, especially since the Supcase cost 10 bucks and does a better job. I really like the kick stand though!

Thanks for this detailed write up on the case! I too have one as well and I love it. I've always gone with the Active cases for all my phones, I love them. They always feel so solid and premium to me. As for the softness of the silicon, I don't think it will be an issue. I still have my S3 and it was always in an Active case as well, with lots and lots of use. I just compared the two and the softness seems identical to me. So I think it should hold up over time. It's definately my favorite case!

Good write-up! Thank you.
I've been wanting to get one of these cases, so this was timely running across your review.
Out of curiosity, how long have you had your Active case for the Nexus ? I've got one on mine that's probably 7 months old now, and I've noticed no "stretching" of the silicone liner, even with a lot of "on and off's" from my Nexus.
Maybe it's a variance between manufactured runs, but while I certainly wouldn't say that mine is "rigid", it's not really "soft" either.... in that I can't mar, or mark it with a fingernail or anything.
If it's the same for this case for the GS4A, then I'll be a happy camper.

I've only had the case on my Nexus since July and I haven't removed it at all. So far I'm impressed with it and I think it's a worthwhile case. It's a little overkill for what I use it for, a TPU case would probably work just fine, but I like the stand and the screen protection in case I need to throw it in a bag or something. As far as the review I might have been a little unclear about the N7 case... The silicon is less firm than the iPhone 4 case BUT after using it for the last couple months I think it'll be fine.
The S4A silicon is thinner and softer than the N7 case IMO. You know how the edges on our N7s comes off but you have to (more or less) consciously push it off? The S4A pops up/off with barely a touch. Since it's in/out of pockets quite a bit during the day I think it'll either wear out or get torn at the bottom. I'm not going to get rid of it or anything, I do believe the case will protect the S4A if dropped, but the softness of the silicon bugs me a little.

Thanks for the wonderful info...it was quite interesting one to go through it....

For what it's worth regarding the softness of the silicone. I had a galaxy note which is much larger than these phones with an active case on it for a year in heavy use daily and the only wear it ever showed is the matte finish on the back got shiny from all the handling. Silicone still looked like new with no tears. Many many hard drops on concrete where I worked and never any damage to phone.
Sent from my GT-I9295 using XDA Premium HD app

I can't find the case for SG4A on the vendor's web site.
http://www.seidio.com/active/
Where can I buy this?
Thank you!

chronos00 said:
I can't find the case for SG4A on the vendor's web site.
http://www.seidio.com/active/
Where can I buy this?
Thank you!
Click to expand...
Click to collapse
http://www.seidioonline.com/seidio-Samsung-Galaxy-S4-Active-s/8911.htm
Looks like is now called DILEX instead of ACTIVE for the S4A.

Rugged Hybrid Armor Y Stand Case (DZ-Tech)

I just saw this case on eBay and was wondering if anyone has tried it (or heard of DZ-Tech before?)
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=190966473899&var=490211744436
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More pictures: http://imgur.com/a/haWCs#0
I bought one because it's cheap enough and it has a kickstand. Really unsure about the material and fit, and it takes a couple weeks to ship to Canada. But I'll post pics/comments when I get it. Hopefully it fits perfectly.
The only thing I want from a case is that it's relatively easy to take off (without scratching or marking the phone) - and the buttons should have a little feedback when pressed with the case.

I have one of those on my Active S4. I like it a lot. Build quality is great, fit is perfect, I have no complaints. I just think it's really ugly.

firemedic1343 said:
I have one of those on my Active S4. I like it a lot. Build quality is great, fit is perfect, I have no complaints. I just think it's really ugly.
Click to expand...
Click to collapse
Good to know. I agree this case is one of the more bulkier around, but the rugged look reminds me of an Otterbox (in a good way).
I haven't found any pictures of that case with the N5 inside, so I guess I'll find out soon!

JLishere said:
Good to know. I agree this case is one of the more bulkier around, but the rugged look reminds me of an Otterbox (in a good way).
I haven't found any pictures of that case with the N5 inside, so I guess I'll find out soon!
Click to expand...
Click to collapse
The case I have for my S4 Active is just as solid as any Otterbox I've ever owned. Actually, I've had a couple of bad experiences with Otterbox cases...to clarify, I like bulky cases, I just don't like the design on the back of this one, but that's just my personal preference, I still use it daily. I care more about function.

I received the above case. Mostly favorable impressions so far. It took a whopping 14 business days to get from California to Montreal/Canada, but I'm quite happy with it. Took many pictures of it and a review on Google+.
Price: $10 + free shipping on eBay
Design: It comes in two parts, an inner skin made of soft silicone and an outer hard shell made of plastic. Both parts can be separated and assembly/disassembly is easy and quick. The inner layer is flexible, it absorbs shocks and feels a lot like the soft-touch texture of the Nexus 5. The outer layer is rigid and holds everything together. Once you slap on the hard shell, the Nexus 5 fits snugly and won't come out easily. The phone is also completely encased in the soft material, so there is no contact with a hard plastic. This means your device won't get marked from within after an impact. The screen is also completely surrounded by silicone and the bumper is raised by a generous 2mm all around - slightly more than the Cruzerlite A2 case. The bumper will also easily accommodate a screen protector (I don't use one personally).
Colors: The inner skin comes in black, white, blue, pink, purple or red. The outer shell comes in black, blue or pink. I went for a simple black/black case.
Cut-outs: There are cut-outs for the camera/flash, charging port, speakers, headset and microphone. They are perfectly centered and don't cause interference. The headset hole is also large enough to accommodate all kinds of 3.5mm audio cords (unlike some other TPU cases that can't work with larger audio plugs).
Buttons: Unlike the Cruzerlite, there are no cut-outs for the buttons. No separate built-in buttons either (like the Spigen). Instead, they are fully covered by soft silicone material. This will be a plus for some people, a negative for others. For me it's a plus. With this case, you lose the ceramic feel in favor of soft-touch (which I like). More importantly though, the buttons retain their normal feedback when pressed. This is something that the official Nexus 5 bumper is criticized for (where buttons will sometimes respond without any feedback). On this case, the fit is excellent and there's no accidental press. The volume button is also marked with individual +/- parts.
Kickstand: The built-in kickstand sits flush with the case when not in use, so it doesn't get in the way. To use it, you lift, slide and lock in place. The Nexus 5 can be positioned in both portrait and landscape modes. The angle is just right. However, the plastic hinge feels a bit fragile/flimsy; something you might easily break if you're not careful. Still, it's a nice bonus compared to some other cases.
Overall: Nicer than I expected for the price. I give it an A- or 4/5. It does add more heft than the official bumper, Cruzerlite or Spigen Neo Hybrid. But for its size, it's relatively light, dual-layer and actually doesn't look too bulky from the front like an Otterbox. It takes a few extra seconds to slap on compared to a bumper, but significantly easier to take out than a Spigen Neo Hybrid. I absolutely like the soft touch buttons. They are fitted perfectly and preserve 100% feedback when pressed with no accidental push (crucial for me). I'm surprised that some cases cost 3x as much, yet don't pay attention to this detail. All four corners are protected by silicone. The kickstand is a nice bonus. The hard shell on the back doesn't attrack fingerprints as badly as I thought. I just wish it had a more premium/textured finish to closely match the Nexus 5. Though for $10 + free shipping on eBay, it's hard to complain. If you're looking for an all around / good value case, I would really consider it. It makes for a nice 'Christmas stocking' gift.
Link: http://goo.gl/Kgg8Vm

Case review: dbrand Grip for Pixel 5

Disclaimer: This review was neither sponsored, nor did I recieve any personal discounts. My personal opinion about this product is unbiased.
Pricing
dbrand lists the case with a skin for 39.90 USD. I applied a newsletter subsription and paid 35.91 USD. No shipping fees were charged.
Delivery
The case was shipped from Canada to Germany in about 12 days and a tracking code. Although I thought that sales taxes would apply and be collected by the customs, the package had a "customs free" sticker on it and no taxes were charged. I dunno why but I do not complain.
Pictures
Retail box
The retail box is a gem. I took some shots of it so you see what I mean. It contributes nicely to the product and makes you feel having purchased something precious. Nicely done, robots!
Assembly
If you purchased a skin with the case, you have to bring it up to the case first. If you watch and follow the video guide, this is fairly easy and led to a perfect result for me.
Build quality / Durability / Looks
For my last 5 phones, I used SPECK cases and therefore was used to bulky cases. In comparison, this case feels lighter and even slim. It sure is a good amount bulkier than typical "slim case" but it comes with a decent amount of drop protection. Thanks to the Pixel 5 being a compact phone, it still can be held with one hand in a comfortable manner when wearing the case.
The edges feature a slighly nobby texture that feels just great and should also prevent accidential slips. The texture of the Matrix skin looks dope.
All in all, this case looks high-class and also provides nice haptics. In my eys, it is worth the money.
Protection
The case feels sturdy and protective. I am confident that my Pixel 5 will survive some serious drops with it.
The lip on the frontside has the signature curve: Thick at top and bottom, flush at the sides. This makes the back-swipe gesture a breeze while still preventing screen contact when placed on flat surfaces. I am a bit unsure wether this will lead to trouble with face-down falls on uneven surfaces, but I assume that a evenly formed lid might not perform much better in this scenario.
Fitting / Cutouts / Buttons
The case fits like a glove. The buttons are super clicky and it's a joy to use them. The cutouts are precise and the port cutout should be big enough to provide space for most cables.
Unfortunately, the fingerprint cutout is rather small. This makes the "swipe down for notifications" gesture definitely harder to use although it still works. For me, this is not a show stopper but it might be for people with fat huge fingers. I just wish that dbrand would have made the cutout a little bit bigger since this is my only point of criticism with this case.
Durability
If you search the internet about the dbrand Grip cases, you will stumble upon many stories where the cases fell apart. Then I found this thread, where dbrand gave a comprehensive explaination why this happened and which counter measures were taken. This case is the latest generation and comes with all the described improvents. Only time will tell wether this case will hold up better.
Verdict
I highly recommend the drand Grip case for the Google Pixel 5: It looks and feels great, provides good protection without adding too much bulk. The customizablity with new skins is unique and might tempt you to spend more money. This being said: If you have huge fingers, the fingerprint cutout might be too small for you. I am confident that this case will not fall apart (or dbrand being obliging if it does).

Could you please take a picture from the top with the screen on and with a white background on (you could go to the settings or anywhere else that shows the entire screen from edge to edge)? I would give an idea of how much bulk it adds to the phone.
I'd really appreciate it. Thanks!

does the Wireless Charger work on pixel+case?

trax69 said:
does the Wireless Charger work on pixel+case?
Click to expand...
Click to collapse
Yes, I use an Anker PowerWave Alloy and wireless quick charging works flawlessly.

dragos281993 said:
Could you please take a picture from the top with the screen on and with a white background on (you could go to the settings or anywhere else that shows the entire screen from edge to edge)? I would give an idea of how much bulk it adds to the phone.
I'd really appreciate it. Thanks!
Click to expand...
Click to collapse
Here you are:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

its a good grippy case.. I love mine.

you gotta be out of your damn mind to pay for this...Ringke case, 12 bucks, owned, tested (not intentional) and it even got a cool Lanyard loop.

I have a new one for sale - has a sage skin on back - never used it - $20 delivered - PM me or email me at [email protected]

One of long term video reviews showed edges warping near cutout and buttons. How is it holding up so far? Price gives me a reason to pause even with the super 'grip" edges.

After using it every day, it is still in mint condition.

Thanks for the really good review. Just one point to clarify: can you please confirm that the back of the base (not just the side bumper) also has a grippy texture? If you put it on your pant leg when sitting, for example, will it slide off easily?

I love my Dbrand Grip with the red dragon skin and its super grippy texture.

If you're looking at phone cases to protect your phone's screen, you need to check out one of the screen guards. Screen protectors are becoming more advanced as the years go by. Some are built right in, some you have to put on separately. Either way, these are the best ways to make sure that your screen is safe. How can I make my phone case grippier?
You should also make sure that the cases you're looking at are anti-skid. This means that the case doesn't just slip over the phone, but stays put instead. If your phone slips out of the case, it will stop the phone from sliding all over the place. How can I make my phone case grippier? Start looking for cases with anti-skid features!
Another question you may be asking yourself is how can I make my phone case grippy if the material is hard and doesn't let the phone slide all over? Well, this is another problem that many phone cases have. So many cases are made of extremely hard materials that it's nearly impossible to slide your phone in and out. But luckily, there are some great soft cases available that are great at preventing your phone from sliding around.

I've been rocking this phone case for over a year. Just ordered the Leather skin insert from D Brand drop and a matte black skin as well. I've had the tear down on it for the year. The case is quite nice and offers good protection. The cut outs make it easy to use gesture controls.

ademmer said:
Durability
If you search the internet about the dbrand Grip cases, you will stumble upon many stories where the cases fell apart. Then I found this thread, where dbrand gave a comprehensive explaination why this happened and which counter measures were taken. This case is the latest generation and comes with all the described improvents. Only time will tell wether this case will hold up better.
Click to expand...
Click to collapse
After over a year of frequent use, I switched to an Google Pixel 6 Pro and therefore also sent this case to rest. Time for a wrap up on durability!
Unlike older generations, my case stood the test of time. The rubber did not separate from the plastic and even after some serious drops on concrete, the case is still in mint condition.
Only the skin foil started to get loose around the fingerprint scanner which led to strange haptics when you remove the finger from the scanner (since the foil will move a millimeter with with your finger). A new skin will surely fix this and so would some glue.
Guess what? I already pre-ordered this case for my new Pixel 6 Pro!