Related
My diamond stuck in RGB mode after a tryed radio update.. and dont't know what to do..
You could try doing a hard reset to see if that works. If not, connect a USB cable to your computer and reflash your ROM from bootloader.
TomInMB said:
You could try doing a hard reset to see if that works. If not, connect a USB cable to your computer and reflash your ROM from bootloader.
Click to expand...
Click to collapse
connected and tried a radio or rom update but the pc dont recognize diamond..
done an hard reset
i've also done an hard reset, but at boot same problem.. ???
yessss retried the rom upgrade with another pc after hard reset.. and it worked! fine i'm happy!
THANKS!
Then just connect the USB cable to the diamond and PC. You should then get 'USB' in grey area of bootloader. Run the RUU on your PC to flash back a ROM. I am guessing flashing the radio buggered the ROM somehow.
EDIT: I am guessing your have a GSM diamond, and not a CDMA (Sprint) diamond, right? Good to hear you got it working!
i have tried to flash my radio a few days ago with no succes , it stucked on 0%
i waitad for a while and then got a message on my pc instruct me what to do :
disconect the sync cable from computer .
take out the battery from the td for few seconnds .
return the batt and soft reset .
i hope that would help you /
I have been using my HTC Desire for a while and have flashed multiple ROMs in the past. Having got the new Galaxy Nexus, passing on the desire to the family.
On the procedure on the flashing RUU I started with flashing a Sense based ROM but my phone after the sense-based ROM phone does charge on USB but there no USB notification neither does the computer recognizes the device.
Again, on flashing CM7 or ICS, USB is detected and phone works fine.
Is there an explanation, please help.
Thanks
vmax007 said:
I have been using my HTC Desire for a while and have flashed multiple ROMs in the past. Having got the new Galaxy Nexus, passing on the desire to the family.
On the procedure on the flashing RUU I started with flashing a Sense based ROM but my phone after the sense-based ROM phone does charge on USB but there no USB notification neither does the computer recognizes the device.
Again, on flashing CM7 or ICS, USB is detected and phone works fine.
Is there an explanation, please help.
Thanks
Click to expand...
Click to collapse
Hi,
Have you tried the pre-rooted stock froyo ROM from teppic74? Give that a try and see if it gives the same issue.
You seem aware of all the processes so I assume full wipes and correct hboots have been used etc.
Sent from my HTC Desire using xda premium
i am quite familiar...am sure the hboot is correct...i tired flashing stock rom to be met with an error, do downgrade my cwm and need the downgrade fow which am missing the downgrade update.zip
Please use the Q&A Forum for questions Thanks
Moving to Q&A
setting
There is a setting which tells what is the USB mode : charging, mass storage device or ask each time. Go to the setting and selects "Ask"
i have done that too
USB debug
vmax007 said:
i have done that too
Click to expand...
Click to collapse
Actually, I've just understood what you want. You have to enable USB debug from
Settings -> Applications -> Development
I have the same problem sb please help
i installed 2 or 3 different roms but still when i plug my desire by usb its charging but pc doesnt recognize my phone?!!
majed.a said:
i installed 2 or 3 different roms but still when i plug my desire by usb its charging but pc doesnt recognize my phone?!!
Click to expand...
Click to collapse
have u got all the drivers installed on ur computer?
also u could flash 4ext recovery and try the usb unbrick option, u mite have usb brick.
Sent from my HTC Desire
jmcclue said:
have u got all the drivers installed on ur computer?
also u could flash 4ext recovery and try the usb unbrick option, u mite have usb brick.
Sent from my HTC Desire
Click to expand...
Click to collapse
i can use fast boot commands, i fixed my memory not recognized error in cwm recovery by using these commands and my pc recongnize my android phone, still i mite have usb brick?
majed.a said:
i can use fast boot commands, i fixed my memory not recognized error in cwm recovery by using these commands and my pc recongnize my android phone, still i mite have usb brick?
Click to expand...
Click to collapse
haha im confused, ur computer doesnt recongnize ur phone but u can use fastboot commands?
anyway u dont have usb brick if u can do fastboot commands.
Sent from my HTC Desire
and i should add extra information to my problem:
when my phone is off and i plug the usb it charge imedietly but when the roms comes up and i plug the usb it takes about 20 sec until it starts to charge...
if u mean when u turn on ur phone then yh. usually starts charging after bootanimation
Sent from my HTC Desire
jmcclue said:
if u mean when u turn on ur phone then yh. usually starts charging after bootanimation
Sent from my HTC Desire
Click to expand...
Click to collapse
No i mean when it gets steady, by the way i changed my rom to mildwild 4.7 this delay fixed, but still not recognizing my storage.
i found another problem : bluetooth doesnt work either.
majed.a said:
No i mean when it gets steady, by the way i changed my rom to mildwild 4.7 this delay fixed, but still not recognizing my storage.
i found another problem : bluetooth doesnt work either.
Click to expand...
Click to collapse
Click the 4ext recovery apk in my sig and install it and flash recovery using the app.
boot into recovery, go down to tools then usb unbrick. see if that works
Sent from my HTC Desire
jmcclue said:
Click the 4ext recovery apk in my sig and install it and flash recovery using the app.
boot into recovery, go down to tools then usb unbrick. see if that works
Sent from my HTC Desire
Click to expand...
Click to collapse
i just got fixed my phone was usb brick, thank u very much jmcclue, u have done me a great favor
Hello
Here's my proplem:
I flashed cyanogenmod nightly build (12.03.2013) and everyting was fine until i updated my HOX by the cmupdater to the next nightly build (13.03.2013). This build is screwed as i can understand ( http://forum.xda-developers.com/showthread.php?t=1786696 ). Ok, then i flashed old working rom (12.03.2013).
USB connection not working since i flash it, however all other works great. In cwm recovery usb storage is not working too. And even in fastboot mode usb is not working.
sorry for my english... hepl me!
Hi,
Did you install HTC Sync Manager to get the HOX drivers ?
Also, if USB doesn't work in CWM... I suggest you to change your ROM, kernel etc....
(On which ROM, kernel etc. are you ? Did you install any addons ?)
o0oMegA said:
Hi,
Did you install HTC Sync Manager to get the HOX drivers ?
Also, if USB doesn't work in CWM... I suggest you to change your ROM, kernel etc....
(On which ROM, kernel etc. are you ? Did you install any addons ?)
Click to expand...
Click to collapse
Yes, htc sync manager and all drivers are reinstalled about five times - no result. I`ve tried three cords, all three are original.
I was on stock ROM, then i flashed cm10.1. And now I'm on stable nightly cm10.1 build. I just can't flash anything, fastboot isn't working...
In cwm I tried to restore old stock backup, but the phone just stops on bootscreen, because i can't flash boot.img i think...
I'm in panic!
I even don't know what else i can try to do to fix it...
'adb devices' returns nothing; same with 'fastboot devices'. I even can't reinstall fastboot mode drivers, cause there's no reaction from windows when i plug the cable in.
Is it kind of "usb brick" or what?
And... is there another method to flash kernel? without fastboot i mean.
what a moron i am...
Full formating of internal memory via CWM was totally bad idea... Now my HOX is totally bricked.
Please help, mates...
What you can't power it on?
Uninstal all drivers and htc syncmanager from the pc. Go into device manager and delete any entry that has something to do with android phones or myHTC (of its there) reboot the pc
Put the phone in the bootloader and connect it to the pc .....
TToivanen said:
What you can't power it on?
Click to expand...
Click to collapse
I can power it on, but there's nothing but the recovery on it.
Mr Hofs said:
Uninstal all drivers and htc syncmanager from the pc. Go into device manager and delete any entry that has something to do with android phones or myHTC (of its there) reboot the pc
Put the phone in the bootloader and connect it to the pc .....
Click to expand...
Click to collapse
Did it all, nothing happened. In fastboot mode when i plug the cable in "fastboot" becomes "fastboot usb", but windows is't reacting...
Fastboot usb is a start.....what if you perform
Fastboot devices from the command prompt
Mr Hofs said:
Fastboot usb is a start.....what if you perform
Fastboot devices from the command prompt
Click to expand...
Click to collapse
Oh, i've tried it so many times... But "fastboot devices" returns nothing, as i said, any other command writes "waiting for device"
Hmmm im running out of ideas here
So you get nothing in the device manager....not a unknown device or APX ?
Mr Hofs said:
Hmmm im running out of ideas here
So you get nothing in the device manager....not a unknown device or APX ?
Click to expand...
Click to collapse
No, nothing...
Mr Hofs said:
Hmmm im running out of ideas here
So you get nothing in the device manager....not a unknown device or APX ?
Click to expand...
Click to collapse
I've found my old HTC Desire, reloaded it into bootloader, then connected to PC and killed all drivers. With Desire it all work great, but HOX is still bricked...
Hmmm then i guess you have some serious usb brick
---------- Post added at 09:34 PM ---------- Previous post was at 09:32 PM ----------
Do you know your hboot version and cid....the only possible thing i can think of is a ruu ? If it can read the phone
Mr Hofs said:
Hmmm then i guess you have some serious usb brick
---------- Post added at 09:34 PM ---------- Previous post was at 09:32 PM ----------
Do you know your hboot version and cid....the only possible thing i can think of is a ruu ? If it can read the phone
Click to expand...
Click to collapse
It's no good. It can be fixed in HTC Service center?
hboot 1.36.0000
cid 038 (india as i remember)
It belongs to 3.14.720.** but i can't find one....only lower ones, so thats a no go.
I guess its a repair centre issue
Mr Hofs said:
It belongs to 3.14.720.** but i can't find one....only lower ones, so thats a no go.
I guess its a repair centre issue
Click to expand...
Click to collapse
I think RUU can't help...
To say that it's sad - is to say nothing...
Anyway, thanks a lot for trying to help, mate! :good:
Well i wish you all the best and i really hope you get it sorted ! This goes beyond my knowledge
Ok, my HOX has been bricked too once.
To unbrick it, I downloaded the ROM of my Internet provider (SFR) and installed it on my phone... (I had no waiting for device issue but to put the rom inside my SD card I used the CWM recovery)
Then I installed a custom ROM.
Also, you may try to :
1. Google your " Waiting for device " issue in fastboot usb mode
2. Get a new fastboot kit. I use the "zedomax"'s fastboot kit (it's a Youtuber) You may find the kit in videos descriptions.
I suppose you didn't make any backup of your HOX thanks to the CWM... :l
(I didn't make any backup of my HOX when it's bricked but now it's working fine...)
Good luck !
o0oMegA said:
Ok, my HOX has been bricked too once.
To unbrick it, I downloaded the ROM of my Internet provider (SFR) and installed it on my phone... (I had no waiting for device issue but to put the rom inside my SD card I used the CWM recovery)
Then I installed a custom ROM.
Also, you may try to :
1. Google your " Waiting for device " issue in fastboot usb mode
2. Get a new fastboot kit. I use the "zedomax"'s fastboot kit (it's a Youtuber) You may find the kit in videos descriptions.
I suppose you didn't make any backup of your HOX thanks to the CWM... :l
(I didn't make any backup of my HOX when it's bricked but now it's working fine...)
Good luck !
Click to expand...
Click to collapse
I have few backups: of stock ROM and of cmROM, but it's no connection when i mount mass storage in CWM...
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
my micromax android one sprout 4 device got fully bricked :crying: (dnt know the reason). i tried to flash stock rom through sp tool, the rom got installled sucessfully but also my phone doesn't turn on . also have problem in usb that, when im connecting usb, it keeps on connecting and disconnection . please help me:cyclops:. whatsapp-9751026364
Change the USB cable or check the SP tools drivers is it installed properly or not ?
nnaveenrajj said:
my micromax android one sprout 4 device got fully bricked :crying: (dnt know the reason). i tried to flash stock rom through sp tool, the rom got installled sucessfully but also my phone doesn't turn on . also have problem in usb that, when im connecting usb, it keeps on connecting and disconnection . please help me:cyclops:. whatsapp-9751026364
Click to expand...
Click to collapse
Stay connected with ur PC and try to flash ROM, do not disconnect ur phone until ur ROM get flashed...
Then u r good to go..??