[Q] VolumeUP and VolumeDown broken...so what can I do now ? - Desire HD Q&A, Help & Troubleshooting

Hello there.
My rooted Desire HD has got broken: volumeUP and volume DOWN buttons dont' work any longer. This means I cannot select items in CWM any longer.
How can I update my current ROM bypassing CWM ? Maybe using only ADB ?

You can still use cwm.
just use home and menu to go up or down

Thanks...but it's not gonna work.
Pressing home or menu makes only menu list on screen disappearing and image with "hat and cirle" getting more visible. Don't undestand what it means and it works so.
I am running CWM 3.0.0.6
Any idea ?

Moreover...I have no issues in launching CWM. The issue I have is selection of items into CWM menu list

pacut said:
Moreover...I have no issues in launching CWM. The issue I have is selection of items into CWM menu list
Click to expand...
Click to collapse
You can use the important features out of the CWM Manager in Android - the few you can´t can be replaced through files (Wiping etc.).
And...this is the wrong board for this.

pacut said:
Hello there.
My rooted Desire HD has got broken: volumeUP and volume DOWN buttons dont' work any longer. This means I cannot select items in CWM any longer.
How can I update my current ROM bypassing CWM ? Maybe using only ADB ?
Click to expand...
Click to collapse
you can post in general
do we have mods here ?

peste76 said:
You can use the important features out of the CWM Manager in Android - the few you can´t can be replaced through files (Wiping etc.).
And...this is the wrong board for this.
Click to expand...
Click to collapse
MENU is changing items and POWER is ok button..
And when you boot, here is a program to change the volume.. You can place a widget on home screen for easy access.. My buttons are gone too

Send your phone back to htc, u should have a warranty on it. it happends to me too.
And yes, wrong section. This should be in general. A lot of people have got this problem

All of this is finally over !
I launched ROM manager, have updated CWM to the latest version. That version does allow using Home and Menu buttons also.
Great !
I have done it !
Thanks

you can buy it from ebay like me and it is easy to repair it just put it hole of cell phone.
i buy it 5$ a day.

pacut said:
Hello there.
My rooted Desire HD has got broken: volumeUP and volume DOWN buttons dont' work any longer. This means I cannot select items in CWM any longer.
How can I update my current ROM bypassing CWM ? Maybe using only ADB ?
Click to expand...
Click to collapse
Are only your buttons broken or loosen or is the board damaged?
My buttons were also broken when i wanted to clean my phone and I build some buttons for my own, but also buying the original ones is not expensive...

Related

[Q] Unable to Boot Wildfire S

i tried to install an update of ROM on my wildfire S..
during the setup it said there is connectivity problem.
the phone went off at that time.. after that it never went live again in any mode..
neither volume down + power worked.
i am very much beginner to android or htc. please help me with a full tutorial or
guide how to fix this.
here is the link to ROM update that i was trying to install
dl3.htc.com/application/sync/htc_sync_3.01.573.2_us_cellular.exe
plz...
and one more thing. its orage lite on front screen starts flashing when i plug in the charger/data cable. i check the battery voltage, they're 4.02v, so i guess the battery is full charged. if i remove the battery and the reinstall it.. the orange lite doesn't blink unless i put the charger again.
i've gone through other threads that seems to have same problem but i could not understand much of the terms used in those.. so plz i need a detailed help
Can you feel 3/5/7 vibrates when holding power button?
What did you try to do actually?
It's a phone sync software and not a ROM update which you have mentioned.
It seems that there might be problem with your battery. Check it first.
droid000 said:
Can you feel 3/5/7 vibrates when holding power button?
Click to expand...
Click to collapse
there is no vibration or any response when i press power buttons or volume down + power button.
Senthamil said:
What did you try to do actually?
It's a phone sync software and not a ROM update which you have mentioned.
It seems that there might be problem with your battery. Check it first.
Click to expand...
Click to collapse
here is the screenshot... i don't know it seems like a rom update which i tried to install..
a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/574971_3934468114092_288541232_n.jpg
u said it could be a battery problem... the battery was working fine a minute ago.. how could it suddenly got rotten.
the forum doesn't allow me to post link.. so plz copy paste the above url to see the image
Did you root phone earlier? or
Is your phone's Bootloader unlocked?
If your bootloader is unlocked and your device rooted, install CWM Recovery via ADB, then download your ROM as a ZIP and install using CWM.
If you're not unlocked/rooted, do that first, again via ADB.
jsthorpe said:
If your bootloader is unlocked and your device rooted, install CWM Recovery via ADB, then download your ROM as a ZIP and install using CWM.
If you're not unlocked/rooted, do that first, again via ADB.
Click to expand...
Click to collapse
the phone won't boot so he can't do either
Sent from my HTC_A510c using Tapatalk
kagevazquez said:
the phone won't boot so he can't do either
Sent from my HTC_A510c using Tapatalk
Click to expand...
Click to collapse
i guess the phone it is now useless because another guys says that
"Its bricked if you cant boot to hboot with vol-d + pwr. Srry only way is to send to htc"
so i guess that's the end of it
today i pressed both vol + and down and pressed power button.. the phone gave 7 vibrations and its LED turned on.
what does that mean? is there way to fix it somehow?

I have a damaged wildfire s mobile

Hi one of my friend it drops the wildfire s mobile with results the touch screen DON'T WORK AT ALL....
The only thing that work is the volume up & down and the power buttons nothing else.
The mobile it begin normally and the screen shows normally but it doesn't accept any command you try to give it from touch screen.
Is there any way to take all my contacts from that phone?
This is the only thing i want the contacts and nothing more then i take it to trash.
A LOT OF HELP FOR YOUR TIME AND ANSWERS.
fits79 said:
Hi one of my friend it drops the wildfire s mobile with results the touch screen DON'T WORK AT ALL....
The only thing that work is the volume up & down and the power buttons nothing else.
The mobile it begin normally and the screen shows normally but it doesn't accept any command you try to give it from touch screen.
Is there any way to take all my contacts from that phone?
This is the only thing i want the contacts and nothing more then i take it to trash.
A LOT OF HELP FOR YOUR TIME AND ANSWERS.
Click to expand...
Click to collapse
dont think so there is any method available for it.
you need to repaired that screen( go to service center)
or this might be silly but you just want to trash your phone after getting contact,
so you can root your phone(unlock bootloader from htcdev then flash cwm recovery)
then take backup of it.(cwm recovery dont required touch,it works with volume and power button)
then restore it on another wildfire s and there you can have access to your contacts.
(this is soo crazy for getting contacts but only way i can see so far)
Yes but HOW EXACTLY i root that phone using ONLY volume up&dowb & power?
Can you give me simply instructions?
Your contacts don't save to your Google account? When I switched phones they all carry over once I sync my gmail account...
Sent from my HTC_A510c using xda app-developers app
I gues not because the phone it isn't mine and i don't want what my friend do with the gmail account.
fits79 said:
Yes but HOW EXACTLY i root that phone using ONLY volume up&dowb & power?
Can you give me simply instructions?
Click to expand...
Click to collapse
very simple..
remove battery then insert battery.
hold volume down+power button
then you can see hboot menu.now with volume button select fastboot(the first option)
then connect your phone with your computer.(you can see in ur phone,fastboot usb)
now,you need to unlock bootloader via htcdev.
then use fastboot to flash recovery..
and then you can use recovery and then you can take backup.
you dont need to add root permissions because you just want backup so you can take out contacts.
I do all that but the recovery menu appear and when I choose something it just the menu disappear and become purple and doesn't do anything at all
fits79 said:
I do all that but the recovery menu appear and when I choose something it just the menu disappear and become purple and doesn't do anything at all
Click to expand...
Click to collapse
then i dont know.might problem with your screen.
and yeah if you have wildfire s 2012 model you need to use modded recovery.you can find it under guide 2012 thread in general section.

Q| Back and Menu not working after update

Hello,
I upgraded my E988 to LGE988AT-00-V10b-HKG-XX-JUN-02-2013+0_user and now my lower buttons(back and menu) dont work at all (Home does work) I tryed installing other version but still the same.
Any solution ?
Any one ? Please I need help
DGman said:
Any one ? Please I need help
Click to expand...
Click to collapse
I am on E980, but what I would try is a Factory Reset on the phone. Back Up First
Tryed that not working :\
DGman said:
Tryed that not working :\
Click to expand...
Click to collapse
Be more specific....?,rooted... Stock.....ROM.,,.......
2SHAYNEZ
shayneflashindaily said:
Be more specific....?,rooted... Stock.....ROM.,,.......
2SHAYNEZ
Click to expand...
Click to collapse
stock 100%
DGman said:
Hello,
I upgraded my E988 to LGE988AT-00-V10b-HKG-XX-JUN-02-2013+0_user and now my lower buttons(back and menu) dont work at all (Home does work) I tryed installing other version but still the same.
Any solution ?
Click to expand...
Click to collapse
I have the exact same issue there. Originally my phone was on AT&T rom and i changed it for Panama rom. It worked correctly for 3 months and now the home and back buttons doesn't works. More specific: They are working on the wrong way. For example when i touch the back button, the phone think i touched the screen above. So if i'm in the apps menu and i touch the back button, it loads the first app above the button in the screen's bottom-left corner. Factory reset doesn't helps
kemenydani said:
I have the exact same issue there. Originally my phone was on AT&T rom and i changed it for Panama rom. It worked correctly for 3 months and now the home and back buttons doesn't works. More specific: They are working on the wrong way. For example when i touch the back button, the phone think i touched the screen above. So if i'm in the apps menu and i touch the back button, it loads the first app above the button in the screen's bottom-left corner. Factory reset doesn't helps
Click to expand...
Click to collapse
Exactly
DGman said:
Exactly
Click to expand...
Click to collapse
So what should we do now? Because if i'm not alone with this problem, it should be maybe just software problem, and maybe a rom re-install can help. Some people told me that it's a hardware isssue but i dont find the point because i used the phone carefully, it newer was dropped. The buttons stopped working this way, while i used the phone for web browsing.
kemenydani said:
. Originally my phone was on AT&T rom and i changed it for Panama rom. It worked correctly for 3 months and now the home and back buttons doesn't works. More specific: They are working on the wrong way. For example when i touch the back button, the phone think i touched the screen above. So if i'm in the apps menu and i touch the back button, it loads the first app above the button in the screen's bottom-left corner. Factory reset doesn't helps
Click to expand...
Click to collapse
I have the exact same issue there , i updated 4.4.2 last week , everything is OK , but yesterday , BACK and MENU button have error , when i touch BACK or MENU it loads the app above the button in the screen's bottom-left corner . Factory reset, KDZ , and use many ROM stock or **** it's still have problem.
kemenydani said:
So what should we do now? Because if i'm not alone with this problem, it should be maybe just software problem, and maybe a rom re-install can help. Some people told me that it's a hardware isssue but i dont find the point because i used the phone carefully, it newer was dropped. The buttons stopped working this way, while i used the phone for web browsing.
Click to expand...
Click to collapse
I think it's a hardware , last night , i charged my phone ( BACK and MENU button) near my Wifi device it's so HOT , i think BACK and MENU button error by my Wifi .....
Its not a hardware problem for sure I tried new lcm (dosent work) and other board on the same lcm (works), Its somthing with the firmware upgrade
Any one has a clue ?
Its a hardware problem I assure u
DGman said:
Its not a hardware problem for sure I tried new lcm (dosent work) and other board on the same lcm (works), Its somthing with the firmware upgrade
Any one has a clue ?
Click to expand...
Click to collapse
Guys I had the exact same problem, thought it was software problem. Later I took it to lg service and they changed the whole panel which would have cost me Rs 8000. Fortunately I had it under warranty(although rooted I unrooted it first before taking my phone to them ) So I assure you this is a symptom with our G Pros. The screen gets really hot and this causes the problem, its a hardware design fault. For temporary solution u can use software keys which can be downloaded from the playstore

Boot fail

my galaxy wonder shut down suddenly ,rebooting to the samsung logo screen only ,and it keep rebooting only to this screen.
I can't access cwm recovery.
I'm using One of a kind rom stable v32.
Is this a brick?!
Any help would be appreciated ASAP
btw i discovered that i can't access download mode too ,and connecting the phone to charger or pc brings it to death
Somor said:
my galaxy wonder shut down suddenly ,rebooting to the samsung logo screen only ,and it keep rebooting only to this screen.
I can't access cwm recovery.
I'm using One of a kind rom stable v32.
Is this a brick?!
Any help would be appreciated ASAP
btw i discovered that i can't access download mode too ,and connecting the phone to charger or pc brings it to death
Click to expand...
Click to collapse
now after searching rhe forums,this is a faulty power button,so I managed to boot it by (errr) abusing it.
now i want to disable the power button ,and find another way to reboot ,any help?
Somor said:
now after searching rhe forums,this is a faulty power button,so I managed to boot it by (errr) abusing it.
now i want to disable the power button ,and find another way to reboot ,any help?
Click to expand...
Click to collapse
If you install any rom Android 4.0+ you can install Xposed Framework + the module Xposed Additions to remap any buttons you like
LS.xD said:
If you install any rom Android 4.0+ you can install Xposed Framework + the module Xposed Additions to remap any buttons you like
Click to expand...
Click to collapse
Thumbs up ,dude:good:
I'm using one of a kind v32 ,but when i try to install xposed ,i get segmentation fault!
so i suppose it won't work on cm9,I wanna try another version but don't know what is suitable..
can you advise me?
I'm so grateful to your solution.
Somor said:
Thumbs up ,dude:good:
I'm using one of a kind v32 ,but when i try to install xposed ,i get segmentation fault!
so i suppose it won't work on cm9,I wanna try another version but don't know what is suitable..
can you advise me?
I'm so grateful to your solution.
Click to expand...
Click to collapse
Mokee should work stable. Its basd on CM11. --> LINK
Mate......get the button fixed.....there WILL come a time when you need it.....like if you have to use recovery.....remapping buttons and software modifications WILL NOT be of ANY use then.......
My wife says I'm a phone geek....She's probably right
keithross39 said:
Mate......get the button fixed.....there WILL come a time when you need it.....like if you have to use recovery.....remapping buttons and software modifications WILL NOT be of ANY use then.......
My wife says I'm a phone geek....She's probably right
Click to expand...
Click to collapse
what if I told you that everything especially electronics is ridiculously priced here in egypt ,and knowing from similar posts that they will change the mainboard ,they're gonna charge hell of a price that I'd probably buy a new phone!
Then I would say 'I feel your pain' lol.......
Things here in the UK ain't exactly cheap either.......
But I've done some research.....the home button assembly is separate to the motherboard and can be purchased separately. The only downside is that you have to completely disassemble the phone in order to replace it......
Here's a YouTube guide that might help.......
http://youtu.be/ZjcucJDzfmk
My wife says I'm a phone geek....She's probably right

Help me to fix Bricked Device

Hello
Please some one help me fix HTC wildfire mobile as its not giving me any option
luvlastcall said:
Hello
Please some one help me fix HTC wildfire mobile as its not giving me any option
Click to expand...
Click to collapse
Your in the stock recovery pal. Hold down the power and volume keys and you will eventually get some options on the screen. Once they come up use the volume buttons to scroll and power to select. Btw, i suspect you have a htc wildfire S not the htc wildfire. So this would be the wrong forum for you if your phone does not have a trackpad at the bottom of the screen (looks like a circle with a dot in it) then you have the S model.
HTC Wildfire
Thanks for Replying back Its not letting me to run recovery and on the top of it if the phone boots up it take almost 20 minutes to get to the home screen and it hang sup their itself you can't even do anything on it and i am trying to unlock the boot loader to run recovery and install custom rom on it but nothing working out. I do have a trackpad on this mobile and i checked over the internet also and its Model number is A3333. So Please help me what all option that i can use on this mobile right now as i am totally new to Flashing Android Mobiles.
heavy_metal_man said:
Your in the stock recovery pal. Hold down the power and volume keys and you will eventually get some options on the screen. Once they come up use the volume buttons to scroll and power to select. Btw, i suspect you have a htc wildfire S not the htc wildfire. So this would be the wrong forum for you if your phone does not have a trackpad at the bottom of the screen (looks like a circle with a dot in it) then you have the S model.
Click to expand...
Click to collapse
luvlastcall said:
Thanks for Replying back Its not letting me to run recovery and on the top of it if the phone boots up it take almost 20 minutes to get to the home screen and it hang sup their itself you can't even do anything on it and i am trying to unlock the boot loader to run recovery and install custom rom on it but nothing working out. I do have a trackpad on this mobile and i checked over the internet also and its Model number is A3333. So Please help me what all option that i can use on this mobile right now as i am totally new to Flashing Android Mobiles.
Click to expand...
Click to collapse
Okay, pull the battery out. Then put it back in after 5 seconds. Hold down volume down, then power and keep both pressed down until a wite screen with some writing comes up. There it should say hboot, a version number and s-on or s-off. What does yours say?
HTC Widlfire
Well I am sharing the screenshot
heavy_metal_man said:
Okay, pull the battery out. Then put it back in after 5 seconds. Hold down volume down, then power and keep both pressed down until a wite screen with some writing comes up. There it should say hboot, a version number and s-on or s-off. What does yours say?
Click to expand...
Click to collapse
luvlastcall said:
Well I am sharing the screenshot
Click to expand...
Click to collapse
Ah ha! Fantastic whoever else had this phone before you has done most of the hard work and security unlocked the bootloader already. http://dl-1.va.us.xda-developers.c...zip?key=kzoSRLwAaSgJsyXiuKJS4A&ts=1431506306 download this and place it onto your sdcard. Reboot into hboot and your hboot should request you to update the recovery. Select yes with volume up. After this you should reboot back into hboot without the sdcard in. Then select recovery from hboot and boot into it.
Once your in recovery you could either:
1. Wipe the data, cache and dalvik cache and then reboot the phone. This will reset the phone and hopefully fix and voot related issues.
2. Wipe the phone entirely and install a new rom. Cyanogenmod 7 is a good lightweight rom. Please look at the development section for all the roms available.
Just one question though, that screen damage looks like bad. Do you know what happened?
Hello Bro
Link that you have shared is not working so please share some other link and please help me to get the best rom for this mobile and please provide me step to step instruction to do it.
Ok
Already Tried
Well Bro tried that and its now working no option i am getting in recovery and just a phone logo with red mark that what i shared in first screenshot in this thread
luvlastcall said:
Hello Bro
Link that you have shared is not working so please share some other link and please help me to get the best rom for this mobile and please provide me step to step instruction to do it.
Click to expand...
Click to collapse
http://www.mediafire.com/download.php?398dklf1uzss5f6 Updated link.
As I have said I recommend Cyanogenmod 7. Read the thread here Its a custom version but its more recent.
Now your screen, I suspect that those marks are from heat damage. Most likely from whoever else had the phone overclocking it. This could be a telltale sign of hardware damage through excessive use and it may never boot properly. I thought I should mention that.
Well i thats case would like to ask one more thing we will be able to fix it or not or its not worth it.
luvlastcall said:
Well If that's case would like to ask one more thing we will be able to fix it or not or its not worth it.
Click to expand...
Click to collapse
Depends, this phone is an old model as far as mobile phones are concerned. the cost of a motherboard and new lcd + digitizer could be the same cost as the phone in a used condition.
I work it out as £23.13 as the cheapest you could get the parts but then you would need to do a full tear down of the device in order to replace most of it. I mean basically your only keeping the frame, trackball, camera and some rubber bits.
Cheapest I can find to buy it in the uk is £25 ( with you needing to sim unlock it).
But I would add that you might as well try get cm7 on the device. The only thing it will cost you is time and you never know, the phone might be usable with CM7 on it. Nothing ventured, nothing gained.
OK bro let me first give a try with the cm7 rom and see if its work and hoping for the best
luvlastcall said:
OK bro let me first give a try with the cm7 rom and see if its work and hoping for the best
Click to expand...
Click to collapse
Good luck pal, keep me posted
Sure Bro and thanks a lot
Well Not sure what happened to screen as my brother was using and i tired to run the recovery and not able to go further only getting this screen while wiping all the data through recovery/Users/Hacker/Downloads/IMG_0170.JPG
Well Not sure what happened to screen as my brother was using and i tired to run the recovery and not able to go further only getting this screen while wiping all the data through recovery and stuck on this screen now
luvlastcall said:
Well Not sure what happened to screen as my brother was using and i tired to run the recovery and not able to go further only getting this screen while wiping all the data through recovery and stuck on this screen now
Click to expand...
Click to collapse
Sorry, i forgot to mention, the controls for the recovery are different from hboot. Push trackball to select items, power is now the back button.
let me give a try and see if its work i installed the rom from Sd card ad restarted the mobile and hoping this will work now
I tried to install stock rom that i have downloaded from HTC Website and that is not getting installed lets hope CM7 will work i can see the ultrabeam revolutionary Logo on the screen right now its still thinking up

Categories

Resources