Related
... before i shell out for another phone because I'm an idiot.
Anyway, I'd been doing some reading and had a thin history of rooting with my G1 which went rather well.(in that I never bricked it)
I did the same with my phone now, the G2. I got it when it first came out, got comfortable with it and finally decided to root it. I guess I didn't do enough research because I used Visionary to root and I believe I am now bricked. I have been up and down the forums for a solution or even a confirmation that I'm bricked for the last 4 hours. I kid you not. I even went into different phone sections in case I found something that could help but zilch.
So yell at me for not doing enough research and reading before i started rooting, but don't yell about this same question being asked over and over again.
Anyways, I can only get to the first white "HTC" screen and freezes.
I can get to HBOOT and that says:
Vision PVT SHIP S-ON
H-Boot-0.02.0000
Microp-0425
Radio-26.03.02.26_M
cMMC-boot
HBOOT
If I try to go to recovery it goes to that little black phone with the red traingle.
If I try to go to factory reset it goes to a green circle with a load bar that just looks like it's working but then it goes back to the white HTC screen and stays.
I have SDK and even though my computer recognizes that an Android 1.0 device is attached, when I "adb devices", nothing is listed.
So what's my diagnoses pros?
Thanks for any help or any response at all in advance.
Dea.
Its not looking good my friend, what exactly have you done to your phone so far?
If it is stuck in a boot loop and you have S-on the only possible thing you can to do fix it is flash the stock PC10IMG, but this will only work if you had the pre-OTA rom on your phone 1.19 and I really doubt that you did. If you had the wifi calling app you had the OTA 1.22 rom not the 1.19 rom. Trying to flash the stock PC10IMG onto your phone if it had the OTA rom 1.22 will cause it to do exactly what is happening now.
There's a file called "pc10img.zip" (the default firmware) that can be placed in the root of your SD, and should automatically be detected and offer to start flashing. I think this is how I recovered my phone which was in a similar state. Someone here could probably link you to the proper file (I'm sure there's different versions for DZ and G2). Good luck...I think you can probably save it.
I'm pretty sure mine was doing the same thing yours is, and I'm happily rockin' CM7 now, and loving it more than ever.
@joemm, Well I had 1.22 on there since I remember having wifi calling. I know you advised me not to but I might look into the PC10img.zip just because it can't get much worse than this honestly.
@hexapus, thanks for the advise. I'll have to look for my sdcard adapter first though. can't seem to find it at the mo'.
And when it does its sd card check on HBOOT, by the way, it says that all the files it wants to load, it says "No image!"
dealunae said:
And when it does its sd card check on HBOOT, by the way, it says that all the files it wants to load, it says "No image!"
Click to expand...
Click to collapse
Thats because its looking for the file named PC10IMG.zip, this is the only file name it will load and it must be on the root of your sdcard.
Check your PM i will message you right now.
This is a link to a page containing instructions for a manual update to 1.22 and a link to the update.zip. Maybe this will work if all else fails by applying the OTA update again.
http://www.talkandroid.com/20232-tutorial-manually-update-t-mobile-g2-remove-google-goggles/
You might be able to hex edit the pc10img.zip so it thinks its version 1.22.
Sent from my T-Mobile G2 running Cyanogenmod.
I also had this same issue, in that I tried visionary and had the same issue. I took mine to the tmobile store and let try to fix it, which they couldn't, and when they asked me what happened I said I was uninstalling an app that was a live screen because it was acting werid. Because I was still under warrenty they help me get a new one sent to me.
Worked out for me, now I read and read and read more. I am rooted via rage and gfree but still run stock.
Good luck
Sent from my T-Mobile G2 using XDA App
Well, everyone, after further button pushing, it looks like I can get into stock recovery. Should I do a wipe and flash a manual update of 1.22? The only reason I ask at this point is that if I try to do this, fail and then try to get it replaced, they might see that I tried to root and not replace it. (I have insurance as well btw.)
dealunae said:
Well, everyone, after further button pushing, it looks like I can get into stock recovery. Should I do a wipe and flash a manual update of 1.22? The only reason I ask at this point is that if I try to do this, fail and then try to get it replaced, they might see that I tried to root and not replace it. (I have insurance as well btw.)
Click to expand...
Click to collapse
The link I gave to you above has some great instructions on applying the manual update again. In my opinion its your best option at this point. BTW I have insurance too. I'm always worried that I might lose my phone!
It won't let you apply the 1.22 update zip because it is not a full rom, people have tried before and it doesn't work, but I guess like you said what have you got to lose.
Sent from my HTC Vision using XDA App
joemm said:
It won't let you apply the 1.22 update zip because it is not a full rom, people have tried before and it doesn't work, but I guess like you said what have you got to lose.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
joe, check out the second part of that link I provided above. The part about those with the google goggles fix. Do you think that would be a good second choice? I don't know if the OP knows how to do a fastboot flash, but it seems like it is more comprehensive. Do you think that it would reverse the effects of the Visionary perm root attempt?
EdKeys said:
joe, check out the second part of that link I provided above. The part about those with the google goggles fix. Do you think that would be a good second choice? I don't know if the OP knows how to do a fastboot flash, but it seems like it is more comprehensive. Do you think that it would reverse the effects of the Visionary perm root attempt?
Click to expand...
Click to collapse
At this point for him I don't see how its gonna hurt to try, but in my experiences in this forum I have not seen anyone able to flash the update 1.22 .zip after being stuck in a S-On Bootloop. Its either gonna work or it wont let him flash it at all, so I really cant see how it could hurt to try. As far as the 1.19 rom it wont let him flash it because it will give a error that the main version is older.
EdKeys said:
The link I gave to you above has some great instructions on applying the manual update again. In my opinion its your best option at this point. BTW I have insurance too. I'm always worried that I might lose my phone!
Click to expand...
Click to collapse
yea. It's how I realized I could still get into recovery. Thanks for the link. I'm at work right now so I won't be able to work on it till later but Wish me luck!
dealunae said:
yea. It's how I realized I could still get into recovery. Thanks for the link. I'm at work right now so I won't be able to work on it till later but Wish me luck!
Click to expand...
Click to collapse
OK, good luck! I hope that it, or something else, eventually works for you. Keep us updated....
So ended up getting a new phone. An htc g2. (sigh) I still really want to to root but am not officially terrified. ha. Looks like a lot of research and reading is in my future.
dealunae said:
So ended up getting a new phone. An htc g2. (sigh) I still really want to to root but am not officially terrified. ha. Looks like a lot of research and reading is in my future.
Click to expand...
Click to collapse
Lol... no need aha. If you have the basic concept of rooting you should be fine. Of course u just follow each step for rooting. Wish u luck
Sent from my HTC Vision using Tapatalk
You didn't fix the old one? The pc10img fix almost certainly would have cleared it all up.
Sent from my HTC Vision using XDA App
I am trying to unroot. I used the 2-step method guide but didn't know that using Unrevoked3 actually also used Unrevoked Forever so I skipped step 1 and just flashed the pc36img.zip in step 2. Everything ran perfect except I did more research and realized I should've ran the s-on tool because I am still s-on.
Is it still possible to apply the unrevoked_forever_son.zip using the stock recovery?
Thanks
No....you will need to root all over then flash the s-on tool again and then flash the pc36img.zip. shouldn't take much time.
Thanks for your reply!
Okay I know how to do that but I think I have another problem...because I panicked, I updated to the latest OTA thinking that would automatically unroot me but still says "s-on"
FYI - I did thus because I'm trading in my EVO for the 3D.
The guy at Target told me the phone just needs to be in excellent condition and working to be able to trade my phone in...
Should I even worry at this point?
aagbulos said:
Thanks for your reply!
Okay I know how to do that but I think I have another problem...because I panicked, I updated to the latest OTA thinking that would automatically unroot me but still says "s-on"
FYI - I did thus because I'm trading in my EVO for the 3D.
The guy at Target told me the phone just needs to be in excellent condition and working to be able to trade my phone in...
Should I even worry at this point?
Click to expand...
Click to collapse
Ouch. If you took the ota there's no going back. Check bootloader to see if its s-on, if its still s-off you might be in luck to flash another recovery and s-on again!!! Check!!
Id say yes give it to them with s-on at least you don't want something getting traced back to your account.
S-ON is unrooted / locked bootloader. I'm a bit confused here. Isn't that what you want it to be on.
Oh oops...I meant to say it's still "s-off"
Darn keyboard autocorrect!
I'm trying to get it BACK to "s-on" because it's currently "s-off"
Sorry for the confusion.
Do I have any options at all? Thanks for helping out guys!
If it's still s-off just flash amon RA in bootloader and then boot to recovery to flash s-on. You are lucky! Flash the pc36img.zip version.
http://forum.xda-developers.com/showthread.php?t=705026
Make sure you don't get it confused with the other pc36img.zip that's already on your sdcard.
OMG! Thank you so much! That is why this is the best Android forum out there! I will definitely take your advice and I will let you know how it goes. Again...many thanks!
aagbulos said:
OMG! Thank you so much! That is why this is the best Android forum out there! I will definitely take your advice and I will let you know how it goes. Again...many thanks!
Click to expand...
Click to collapse
I hope it works dude! Enjoy your 3D if you get it!
If it doesn't work its because you have the ota gb radio and you will need to downgrade it to the 11.19 radio from froyo then s-on should flash.
Remember you need the 11.19 radio to flash s-on. Its also flashed from recovery.
http://forum.xda-developers.com/showthread.php?t=715485
Ok thanks for the tips!
One last thing before I give it a go...I'm only flashing the pc36img.zip file via bootloader. The other zip file is if I was pushing the file using adb, correct? Please correct me if I'm wrong. I don't want to mess up any further lol
aagbulos said:
Ok thanks for the tips!
One last thing before I give it a go...I'm only flashing the pc36img.zip file via bootloader. The other zip file is if I was pushing the file using adb, correct? Please correct me if I'm wrong. I don't want to mess up any further lol
Click to expand...
Click to collapse
Yes that's the recovery. Just flash in bootloader no need for adb. Once you get recovery up delete that pc36img from your sdcard. You will need to grab that 11.19 radio and flash that in recovery then reboot. Once you're back to bootloader go back in recovery then flash the s-on (after the radio).
It should be very easy and wont take that much time.
Cool. I will do that. Glad you were so helpful! I sure hope the 3D phone lives up to its billing...I came from MikG 2.1 and that was a killer Rom. I do know that the developer aamikam is getting that phone too and is going to cook up a Rom once HTC release the unlocked bootloader update.
aagbulos said:
Cool. I will do that. Glad you were so helpful! I sure hope the 3D phone lives up to its billing...I came from MikG 2.1 and that was a killer Rom. I do know that the developer aamikam is getting that phone too and is going to cook up a Rom once HTC release the unlocked bootloader update.
Click to expand...
Click to collapse
Im jealous. My upgrade is in September not that far away. I also liked miks roms he's a great dev. My evo is doing pretty good plus my better half has her Nexus S so I can always play with that if I get bored lol.
It worked! I am so happy but sad at the same time lol. Happy it worked and sad that I will be trading in my EVO. I appreciate the help dude! You saved my a** hehe.
And now the waiting game begins for the 3D update...
aagbulos said:
It worked! I am so happy but sad at the same time lol. Happy it worked and sad that I will be trading in my EVO. I appreciate the help dude! You saved my a** hehe.
And now the waiting game begins for the 3D update...
Click to expand...
Click to collapse
Glad you got it going man. Enjoy your 3D! See you on the other side dude lol
hey everyone. I am a bit confused, and i would greatly appreciate your help. So I have a Desire Z from bell. Currently this is what I see when i hold vol down, and power:
Vision PVT SHIP S-ON
H-Boot- 0.81.0000
Microp- 0425
eMMc- boot
Sep 2 2010.17:59:38
So I want to get it back to stock. simply just like out of the box. I do have a back up, BUT it still keeps clock work mod recovery. Which I want to get rid of too. like I said JUST LIKE OUT OF THE BOX. So i was doing some research, and I found that a way to do that is to flash to spf file. I dont really know what that is, but I am assuming it a complete stock rom? (correct me, thank you.) So If any of you could provide me with that file, or tell me how to go about doing this, I would be very very thankful. Again, Thank you for all your help.
HeatRyder said:
hey everyone. I am a bit confused, and i would greatly appreciate your help. So I have a Desire Z from bell. Currently this is what I see when i hold vol down, and power:
Vision PVT SHIP S-ON
H-Boot- 0.81.0000
Microp- 0425
eMMc- boot
Sep 2 2010.17:59:38
So I want to get it back to stock. simply just like out of the box. I do have a back up, BUT it still keeps clock work mod recovery. Which I want to get rid of too. like I said JUST LIKE OUT OF THE BOX. So i was doing some research, and I found that a way to do that is to flash to spf file. I dont really know what that is, but I am assuming it a complete stock rom? (correct me, thank you.) So If any of you could provide me with that file, or tell me how to go about doing this, I would be very very thankful. Again, Thank you for all your help.
Click to expand...
Click to collapse
Hmm not sure what that spf method is. Simply find the thread with all pc10img.zips in it, and find your stock rom. Flash in the bootloader and your good to go!
Sent from my HTC Vision using XDA Premium App
xsteven77x said:
Hmm not sure what that spf method is. Simply find the thread with all pc10img.zips in it, and find your stock rom. Flash in the bootloader and your good to go!
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
omg thank you. that makes sense. the only thing is how do I find the right one?
This is what I see in my software information:
Android Version: 2.2
Baseband Version: 12.22.60.09bU_26.02.01.15_M2
Kernel Version: 2.6.32.21
Build number: 1.34.666.5
Software number:1.34.666.5
Btw doing this will get rid of clockwork mod too right? THANK YOU!!!!
Do you have a g2 buddy? Or is it a desire? If it's g2 i can definitely help ya Edit: LOL nevermind i see that its a desire z. Go to this page....
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#ROMs
Hopefully that at least gets ya in the right direction cause i dont know much about desire z
If your phone has been updated with an ota, it might not be so easy to install a pc10img unless the pc10img IS the ota update. The phone not being rooted and s-on will not let you "downgrade" versions. There may be an easier way, but if you can't simply flash a pc10img, you may have to actually go through all the steps to root/s-off it, THEN you can install the original pc10img.
Hopefully someone with more knowledge with me will just know how to flash the stock recovery if nothing else for you. Here's hoping!
xsteven77x said:
If your phone has been updated with an ota, it might not be so easy to install a pc10img unless the pc10img IS the ota update. The phone not being rooted and s-on will not let you "downgrade" versions. There may be an easier way, but if you can't simply flash a pc10img, you may have to actually go through all the steps to root/s-off it, THEN you can install the original pc10img.
Hopefully someone with more knowledge with me will just know how to flash the stock recovery if nothing else for you. Here's hoping!
Click to expand...
Click to collapse
k so right now i am just gonna s-off. then i will try the pc10img again. hopefully it will work, and i will be back to how it was out of the box. without clockwork and root and etc.Thank you so far.
Your welcome. Even after you flash the pc10img it will still be s-off. Just follow the directions that wiki page i gave you to put s back on. It will involve getting temp root on your new stock rom, and having gfree put s back on. Dont worry, it cleans up and does not leave ANY trace that you did the temp root (if you have to send it back or something). Let me know how it goes! I'm watching this in case you need help.
xsteven77x said:
Your welcome. Even after you flash the pc10img it will still be s-off. Just follow the directions that wiki page i gave you to put s back on. It will involve getting temp root on your new stock rom, and having gfree put s back on. Dont worry, it cleans up and does not leave ANY trace that you did the temp root (if you have to send it back or something). Let me know how it goes! I'm watching this in case you need help.
Click to expand...
Click to collapse
okay so far i have turned s-off. it was a bit of a process but i did it. now i need the pc10img. i am having trouble finding the right one. i looked at the forum u gave me, but i still dont understand which one i should use. btw i have my desire z with bell. i also gave some information above. so what do u suggest?
you would want your hboot to say s on instead of s-off if you are returning to stock
Sent from my PC36100 using Tapatalk
im0rtalz said:
you would want your hboot to say s on instead of s-off if you are returning to stock
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
You even confused me with that one. If he was s-on and that start of all of this, the hboot s-stuff has nothing to do with it. Even if it did, installing the pc10img will replace the hboot with the correct one. He used gfree (i think) to get s-off.
I'm sorry OP if i had a desire i would be able to give u the right version to install If you look in the main dev forum i'm sure there is a topic called return desire to stock, and find the pc10img that they recommend. That would be my next suggestion since i really dont know about that phone
xsteven77x said:
You even confused me with that one. If he was s-on and that start of all of this, the hboot s-stuff has nothing to do with it. Even if it did, installing the pc10img will replace the hboot with the correct one. He used gfree (i think) to get s-off.
I'm sorry OP if i had a desire i would be able to give u the right version to install If you look in the main dev forum i'm sure there is a topic called return desire to stock, and find the pc10img that they recommend. That would be my next suggestion since i really dont know about that phone
Click to expand...
Click to collapse
I searched a lot. i think my brain is going to explode. I just cant find the right RUU. i tried a couple and they all turn in to error [158] image error. I am so confused at this moment.
I tried RUU_Vision_BellMobility_WWE_1.34.666.1_Radio_12.28b.60.140e_26.03.02.18_M2_release_154437_signed.exe which should work. but it still says error 158. i dont know how to get through this.
okay so i am unrooting now. BUT another roadblock. hboot wont install pc10img it says parsing then returns to the main menu of hboot. i have double checked everything, the image is legit, and the name is fine. when i try to install it through clockwork it says error (bad). i am confused. i will appreciate any help. if u need the firmware info and all, please look at the first few posts.
Hello all, I'm in serious need of some help, I've been working at this for a couple of hours now and can't figure it out, so I turn to you, o mighty forum.
I have an HTC Incredible and I'm currently running MIUI and clockwork recovery mod. I've been having all kinds of problems lately, and I want to just delete everything on my phone and get it back to stock, the way it was when I turned it on for the first time out of the box. If anyone can help me get this done I will be forever grateful, because I'm at my wits end. I have no idea what to do, or where to start, so if anyone could provide me with a step-by-step instructions, I would be very happy.
Thank you
bobrea said:
Hello all, I'm in serious need of some help, I've been working at this for a couple of hours now and can't figure it out, so I turn to you, o mighty forum.
I have an HTC Incredible and I'm currently running MIUI and clockwork recovery mod. I've been having all kinds of problems lately, and I want to just delete everything on my phone and get it back to stock, the way it was when I turned it on for the first time out of the box. If anyone can help me get this done I will be forever grateful, because I'm at my wits end. I have no idea what to do, or where to start, so if anyone could provide me with a step-by-step instructions, I would be very happy.
Thank you
Click to expand...
Click to collapse
Id be glad to help you. First off though are you s-off, and once you go stock again do you plan on rerooting in the future?
cmlusco said:
Id be glad to help you. First off though are you s-off, and once you go stock again do you plan on rerooting in the future?
Click to expand...
Click to collapse
Thanks for the reply. Right now I am S-On. And no, I don't plan on rooting again.
bobrea said:
Thanks for the reply. Right now I am S-On. And no, I don't plan on rooting again.
Click to expand...
Click to collapse
Ok then all you need to do is flash an ruu thru hboot.
Go here (http://pvillecomp.com/?page_id=22)and download the Gingerbread PB31IMG.zip
From the home screen of the phone hit Menu - Settings - Applications, and make sure fastboot is NOT checked.
Then go here (http://pvillecomp.com/?page_id=79) to learn how to flash the ruu thru hboot.
If you have any issues i will be keeping an eye on the thread.
I think I tried this earlier but it didn't work due to something about a newer version already be installed. I'll keep you posted.
bobrea said:
I think I tried this earlier but it didn't work due to something about a newer version already be installed. I'll keep you posted.
Click to expand...
Click to collapse
What android version are you on now? If its 4.08.605.2 then you will need to do the ruu exe with a pc. Its the first one on the pvillecomp link where the PB31IMG is.
To be totally honest I'm not sure. I tried using an RUU earlier but it kept saying my phone wasnt plugged in and it couldn't run, even though the phone was plugged in.
bobrea said:
To be totally honest I'm not sure. I tried using an RUU earlier but it kept saying my phone wasnt plugged in and it couldn't run, even though the phone was plugged in.
Click to expand...
Click to collapse
To do the ruu exe you need to have htc sync installed on your pc, to get the right drivers. Im not positive but you may need to remove the adb drivers first.
Baseband version: 2.15.00.07.28
Kernel Version:
2.6.37.6-cyanogenmod+
Android Version: 2.3.7
bobrea said:
Baseband version: 2.15.00.07.28
Kernel Version:
2.6.37.6-cyanogenmod+
Android Version: 2.3.7
Click to expand...
Click to collapse
Thats the problem your on a custom rom thats ported, and a higher android version than the latest stock ruu for the inc, so the ruu thinks yout trying to downgrade. Since your still on the correct radio needed for unrevoked to achieve s-off, i would reroot and s-off the phone with unrevoked, then flash a stock ota based inc rom (perferably 4.06.605.3), then go s-on again with the s-on patch, then do the ruu and it shouldnt give the firmware too new error anymore, and should get you back to complete stock.
What does that mean/how do I do it? I'm totally clueless here.
What does that mean/how do I do it? I'm totally clueless here. I just downloaded unrevoked 3.
bobrea said:
What does that mean/how do I do it? I'm totally clueless here.
Click to expand...
Click to collapse
Go here (http://unrevoked.com/#inc) get the unrevoked program and run it to root your phone and get s-off again. Instructions are on that page for using it.
Then flash this rom thru clockworkmod recoveryrecovery (http://forum.xda-developers.com/showthread.php?t=1247253), and reboot.
Then flash the s-on tool thru recovery (http://downloads.unrevoked.com/forever/current/unrevoked-forever-son.zip)
Then do the PB31IMG.zip ruu again, it should work this time, and you will be complete stock.
Not exactly sure what's going on here. I used unrevoked 3 and got the original OS back on there, but when unrevoked runs, it asks if I want to install that PB31IMG file. I chose to not update with that and just reboot into recovery (which if I'm correct should be clockwork,) so I could flash that ROM, but when I reboot the device, I get a black screen wiith a picture of the phone and an ! in a red triangle. The unrevoked program just says "waiting for reboot..."
bobrea said:
Not exactly sure what's going on here. I used unrevoked 3 and got the original OS back on there, but when unrevoked runs, it asks if I want to install that PB31IMG file. I chose to not update with that and just reboot into recovery (which if I'm correct should be clockwork,) so I could flash that ROM, but when I reboot the device, I get a black screen wiith a picture of the phone and an ! in a red triangle. The unrevoked program just says "waiting for reboot..."
Click to expand...
Click to collapse
Go aheda and let unrevoked do the PB31IMG, that is the cwm recovery. The red triangle is still the stock recovery. Are you s-off now?
Nope, I'm still S-on. Not really sure what happened, but I have the original OS on the phone and from what I can tell, it's working fine. But I'm still S-on
I'm going to call it a night. I'll check this thread tomorrow when I get back from work and class. Thanks so much for all of your help so far.
bobrea said:
Nope, I'm still S-on. Not really sure what happened, but I have the original OS on the phone and from what I can tell, it's working fine. But I'm still S-on
Click to expand...
Click to collapse
Welk then you are stock just like the day you got it. If you want you can do the gingerbread ruu now, and it should not give the firmware too new error, ir you can stick with froyo, and at some point it will pop up with the latest ota to install.
Thanks so much, again. This was driving me crazy.
I'm still new to this, so forgive me if this is a dumb question, but I can't seem to find a straight answer in other posts.
I have a VZW Htc One and I used rumrunner successfully when i was still on 4.2. Being new to rooting,etc. I wasn't thinking about the OTA update and accepted it.
I lost root according to the Root Checker app (and titanium backup says I do not have root access). When I boot to the bootloader, it shows
*** Unlocked ***
M7_WLV PVT SHIP S-OFF RH
Hboot 1.55.0000
Radio-1.12.41.1112_2
OS-2.10.605.1
My question is will the instructions on this thread still work to regain root?
http://forum.xda-developers.com/showthread.php?t=2417043
If not, do I need to wait for the new rumrunner from beaups or is there another way?
If you are still S-OFF and Unlocked just push a custom recovery via fastboot and you can install SU from there. Or just flash a custom rom that is already rooted.
zetsumeikuro said:
If you are still S-OFF and Unlocked just push a custom recovery via fastboot and you can install SU from there. Or just flash a custom rom that is already rooted.
Click to expand...
Click to collapse
Great. Thank you. Is TWRP the consensus choice for recovery?
cope413 said:
Great. Thank you. Is TWRP the consensus choice for recovery?
Click to expand...
Click to collapse
I did same thing when 4.3 ota came out. I was passed. Was still s off and went into fastboot and flash tarp. After that ice been flashing every rom for etc one. Goodluck!
freckzula said:
I did same thing when 4.3 ota came out. I was passed. Was still s off and went into fastboot and flash tarp. After that ice been flashing every rom for etc one. Goodluck!
Click to expand...
Click to collapse
Not exactly sure that that is English, but good to know it works.
Thanks.
cope413 said:
Not exactly sure that that is English, but good to know it works.
Thanks.
Click to expand...
Click to collapse
Whoops auto correct. Hope u understand! Lol
So is the only reason I can't post in the developer's forum is because I don't have 10 posts and therefore could potentially be a spammer?
cope413 said:
So is the only reason I can't post in the developer's forum is because I don't have 10 posts and therefore could potentially be a spammer?
Click to expand...
Click to collapse
Yeah, or being a new forum member, they may not know or bother to search for answers to their questions before asking ones that have been answered already.
Unfortunately many users still haven't learned this after hundereds of posts, lol.
But yeah, that is the basic idea why.
Thanks Santod. I swear I had an account on here with a bunch of posts - because you helped me with my Thunderbolt a couple years ago - but I guess not.
People like you make this place worthwhile. Glad to see you're still contributing.