Related
Hey all,
I decided to root my HTC Desire today, via unrevoked3; everything went alright.
I later installed ClockworkMod Recovery, and flashed the ClockworkMod recovery image. I tried to make a backup from inside the ClockworkMod Recovery app (ROM Manager). The phone reset, loaded the ClockworkMod recovery image, but then failed backing up, complaining about "failed signature verification". (I should mention at this point that my phone could still boot up.)
I searched the forums a bit, and someone suggested to just select backup/restore from within recovery mode. I did so, and the backup completed.
After that, the phone reset... but now, it sits at the white HTC screen and won't go any further. Every 30 seconds or so, the screen goes black for a bit, then the white HTC screen comes back (phone restarts, I assume). Also, I should mention that I can still get into the bootloader & recovery mode (Clockwork), if that helps.
I wouldn't mind reimaging my phone via one of the Desire RUU packages, as I was planning to upgrade my rom/radio anyways...
Anyone have any suggestions? I'm rather new to the android community, so help a newbie out!
Thanks in advance.
If I were you I would first try to clear data/restore to factory settings from recovery.
Failing that I would restore the backup you made.
If that didn't work just flash a custom rom (clear data again).
If all of that still fails flash the RUU.
Hey, thanks for the info & reply.
I ended up doing a factory wipe, and flashing a custom rom (MoDaCo)
Everything seems to be working order... thanks again!
I have a question / issue somewhat related to this. I have the USCC version of the HTC Desire. I have it rooted via unrevoked forever. I created a goldcard following the guide on modaco. I placed the rom I was trying to flash over to on the root of the SD card (leeDrOiD in this case). The rom flashes over successfully, but it will never boot up. It stallsl at the white HTC screen. It will never go past this. I did a wipe before hand as well. I have hboot 0.98.0000. That's the only thing I can think of that is different from the other forums I've seen. My radio is 2.05.10.06.29. I have tried several other roms as well. I can easily flash back to a backup I made of the stock rom, but I really want to use a custom one to get to 2.2. Any help is greatly appreciated.
Hi all, long time lurker, first time poster!
I've just installed the InsertCoin v20 on my S-OFF, CM7 Hboot HTC desire, and it has been stuck on the htc screen for ages now.
I've reflashed it many times, including the radio (32.44.00.32U_5.09.05.30_2), the recovery (clockwork v3), and the rom. nothing seems to be working.
I have a feeling it might have been the bootscreen I flashed - I flashed the original HTC boot screen from alpharev website.
Does anybody have any ideas! I did a full wipe before flashing this rom (I came from Cyanogen 7)
8ball2253 said:
Hi all, long time lurker, first time poster!
I've just installed the InsertCoin v20 on my S-OFF, CM7 Hboot HTC desire, and it has been stuck on the htc screen for ages now.
I've reflashed it many times, including the radio (32.44.00.32U_5.09.05.30_2), the recovery (clockwork v3), and the rom. nothing seems to be working.
I have a feeling it might have been the bootscreen I flashed - I flashed the original HTC boot screen from alpharev website.
Does anybody have any ideas! I did a full wipe before flashing this rom (I came from Cyanogen 7)
Click to expand...
Click to collapse
Does the rom fit the cm7 partition table? If it's too big then the phone won't boot, though Iffr think recovery should still work in that scenario.
Also check the md5sum of the boot image file - search on Google for a free tool for doing this.
Are you able to boot to bootloader?
stringer7 said:
Does the rom fit the cm7 partition table? If it's too big then the phone won't boot, though Iffr think recovery should still work in that scenario.
Also check the md5sum of the boot image file - search on Google for a free tool for doing this.
Are you able to boot to bootloader?
Click to expand...
Click to collapse
Insertcoin should work on CM7 hboot, so they say, so it's some other problem he's experiencing I guess. Maybe he forgot to make an ext partition on the SD card...
CSharpe you hit the nail on the head...I completely forgot to make the ext3 partition on my SD card. It was driving me mad last night, I only wish you had told me sooner, I was up until 6am sorting it out!
Thank you!
I am a newbie in this rom flashing land.
I managed to root my Desire this morning using unrevoked 3 method. It was successful. I then installed Rom Manager (free) from Market and tried to make a backup. It ran smoothly until the phone rebooted. The reboot looped at HTC logo.
After searching around, I go to Recovery and restore the newly backup image and the phone went back online. I thought I had bricked my Desire already. .
I have the following questions, please enlighten me:
1) What might cause the shocking loop?
2) In the unrevoked 3 program, I notice that the "Disable Security" was checked when I managed to root the Desire. Does that mean I have S-OFFed the Desire as well in the process? If it is still S-ON, how can I tell and if I download a ROM and try to flash it (I still don't know how), will there be any undoable problems?
Thanks
1. Probably ROM Manager - use the flashed recovery - it works all the time.
2. Unrevoked3 does not S-OFF your phone, you need alpharev for that. To make it sure turn off your phone and reboot to bootlader (Holding VOL- and POWER keys). For the ROM part, check each ROM's thread for requirements to avoid problems.
Hi nqk.
I have only been looking into rooting for a couple of weeks and had the very same experience as yourself. (and the security off bit too). Bricked already!!
Before I had S-Off I tried both CM7 and oxygen, they both worked ok, but if your reason for rooting is the gain memory with the desire I would certainly say go down the alpharev road and use a new HBoot.
The stickies on the development section really do explain it well for us "noobs".
Currently I am running Oxygen 2.1.4, Alpharev oxygen r2 HBoot and S-Off running a 1GB ext4 partition.
Just so giddy with the amount of space available!!
I flashed new custom rom with s-on and stock hboot. Everything is fine so far.
Sent from my HTC Desire using Tapatalk
few times when I have rooted using unrevoked3.21 and run a backup from Clockwork recovery 2.5.0.8 (?) it has stuck on the htc screen... not a great problem as I have usually flashed it straight after - but still annoying
Lothaen said:
few times when I have rooted using unrevoked3.21 and run a backup from Clockwork recovery 2.5.0.8 (?) it has stuck on the htc screen... not a great problem as I have usually flashed it straight after - but still annoying
Click to expand...
Click to collapse
It happened to me when it was still connected with pc via usb cable. You can try removing that.
Sent from my Desire HD using Tapatalk
Hello All,
I recently rooted my EVO3D using the HTCDEV method because the bootloader was version 1.5.
Here are the steps I followed to root (sorry for the copy and past but I want to be as detailed as possible)
Files Used
su 2.3.6.3
TWRP Recovery
Steps Taken:
1)Take both the su.zip and recovery.img files and put them in your sdk tools folder.
2)Now do the following in ur command prompt, hitting enter after each command.
3)Code:adb push recovery.img /sdcard/And,
4)Code:adb push su-2.3.6.3.zip /sdcard/Then,
5)Code:adb reboot bootloaderUr phone will go to fastboot and should look like the after picture above. Now you can flash the twrp recovery, so do,
6)Code:fastboot flash recovery recovery.imgIt will ouput something like this,
7)Code:sending 'recovery' <5068 KB>... OKAY////writing 'recovery'... OKAY///finished. total time: 11.355sNow you have twrp recovery, so you can navigate to it. On ur phone, use the power button to pick bootloader, then scroll down to recovery and pick that. You will then be booted into recovery.
8)Here you can pick "install zip" and then pick the "su-2.3.6.3.zip"
It will flash, the you can pick "back to main menu", then "reboot system now"
9)You will boot back up and have working Superuser. I have had no trouble with Titanium Backup, Root Explorer, Quick Boot or any other app that requires root. Before you do too much, it would be good to go back to recovery and do a Nandroid backup. Always best to get one ready before you start modding anything.
All of this worked fine, and the phone was "unlocked."
Then, I flashed the most recent version of CleanRom (2.7)
Again, the phone worked fine, battery life was a little crappy.
I decided to flash Ziggy's kernel.I flashed the kernel simply by putting on the SD card, and then rebooting into recovery. This worked fine as well, but I noticed some of the buttons for example the menu popups displayed volume where it should have said more, or bluetooth options where it should have said preferences. so this is where the trouble started, I downloaded kernel manager, and flashed silverneedle through that program. Now, I am stuck at the White HTC Splash screen bootloop. The phone turns on and after 15 seconds reboots, and reboots, and reboots.
What Ive attempted:
I have done countless wipes and clears of the dalvik cache and cache
ive formatted the system and the date sections (advanced menu in twrp)
ive reflashed the rom after wiping countless times
ive tried flashing different kernels in recovery to no avail
factory reset and wipe havent helped
im not concerned losing the contents of the SD card
I need help because I already had two phone claims in the past 11 months, and if I claim another lost phone I will lose insurance for life with Asurion (sprint)
anytips or help would be greatly appreciated
i can provide any additional info
Similar situation, Not sure if you've already solved the problem but I'm going to copy paste my solution from another thread...
Hi, I'm not sure if this is the right place to ask but this is a preety derp question. I've gone across the internet and tried a lot of reflashing to repair my sort of "bricked" evo. What happened, was that I had a evo 3d s-on htc bootloader unlocked, with custom recovery -clockwork..anyways I had flashed the leedroid 3d 4.0 rom and It worked the only problem was my wifi, so i attempted to flash another kernel onto it, but I had accidently flashed "Rcmix" kernel which I later found out was cdma =.=. so now my phone keeps rebooting at the htc screen, it would just load up with the green htc letters, then after 10 seconds or so it'd reboot, and then begin the process again. I can boot into bootloader and recovery but whatever I flash doesn't seem to work including restoring my backups...and then the battery died so i couldn't even charge it or go in. But i managed to work out I could load into bootloader from the CMD and the furthest i've gotten to is to have the bootloader show FASTBOOT USB. SO I must be getting somewhere...? I did read that i had to load from the cmd and not just from power+vol down..but I'd appreciate any help towards restoring my phone to the way it is or at least before i flashed the rcmix.
Just a note tho I've tried factory resetting but all i get is that it loads into recovery at the bootloader options i dont get "clear storage" as an option and "restore to factory settings" and what not just boots me into recovery agian.
EDIT:
I Managed to fix the phoneeee!!!..just for future preferences and anyone else who has this problem...
I followed bits and piece of IL DUCE's advice to izzy spun, the important part was booting the recovery from cmd. I wasn't able to "erase recovery" But I tried just booting it,
First I would remove the battery,
Put it back in,
Plug the usb cable in
1. Type command, from your Adb/fasboot folder, "adb reboot-bootloader"
2. After that I made sure my bootloader said "Fastboot USB", and then I issued the command, "fastboot boot cwm-4.0.1.4-shooteru.img" or with whatever recovery you had..
3. From there I restored from my backups my original rom. Rebooting, and fixed.
--- and It worked. At the time I was on clock work recovery, i only had the Revolutionary recovery img. Cwm-4.0.14.-shooteru.img to be exact,
after going in there I just cleared the cache and davlik and then, proceeded to restore my backups (I'm not sure if it would've worked if I had re-flashed the leedroid or a custom rom)
and then I simply rebooted the phone, and it got back into my phones original state before leedroid (as I had Only backedup before then)....
Apologies for the lengthly post, but I guess reading does help, but I've been going nuts before I managed to fix this. Just thought I'd leave this post incase someone were to need this.
Same problem
Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(
awsomepanda20 said:
Hi there. I just recently joined so excuse my noobness but i have a similar problem. I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I bootup the kernel through the recovery mode on the phone butit failed to load so i just reeboted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc...........but the problem is i dintmake any kind of back up or recovery i think. I know i know im stupid and an idiot but i just sort of panicked n ended up with this. If anyone can help please tell me.I do not want to pay for a new phone at full price. PLEASE HELP THIS POOR NOOB!!!!! X(
Click to expand...
Click to collapse
What your going to have to do is flash the original kernel you started with. thats why your in a bootloop
Similar problem
Hi everyone!
I have a kind of similar problem, so I won't post it in a new thread.
Yesterday I rooted my phone following this guide: androidforums.com/evo-3d-all-things-root/494212-complete-newbies-guide-rooting-flashing-evo-3d-roms-kernels-using-fastboot . html (i am not allowed to post links to prevent spam).
I unlocked it with htcdev and installed a custom ROM without getting any errors. After restarting the phone, it got into a boot loop; it showed the starting animations of htc and the ROM and then shut down again.
Here some more information:
-Evo 3d Europe gsm
-hboot 1.5
-s-on
-image version 3.28.401
-installed ROMs using clockworkrecoverymod (as proposed in guide)
I have tried these ROMs (all leading to boot loop):
ICS NonSense
Cyanogen Mod 10 – DisarmedToaster (v. 1.4 and 1.5)
Jelly Bean 3d (by Ubuntuz)
SAD 2.1 DEsenseX
I installed the ROMs by doing:
Connect device via usb > flash boot.img via fastboot (from pc) > clear Cashe/UserData/DalvikVM > install rom.zip from sdcard > reboot
I really don't know what to try
Any ideas how I could install a running Android OS are highly appreciated.
Thx for any help
Problem solved!
Ok, I solved the problem by simply relocking the phone and installing the stock ROM with the RUU.exe
RUU.exe
I'm glad someone else mentioned Relocking before running the RUU. I've read several posts be others that have actually stated that Relocking wasn't necessary but in order for the RUU to take you have to Relock. IF you get a chance check out CoolICS Rom and MeanRom both are pretty good.
Thanks all for the help, had to revisit this issue today.
Hey, everyone!
So within the past week or two my stock standard HTC One X started playing up, which I'm pretty sure was a result of a recent system update (to 4.2.2, from memory). My 'twilight' app (similar to f.lux but for phones) started randomly turning on and off for no reason, the screen became very rapidly unresponsive unless a great deal of force was applied or the phone was repeatedly locked and unlocked, it began to heat up (even more so than normal), etc, etc. Yesterday the unthinkable happened: it got stuck in a bootloop.
So here's how I wound up where I am right now.
I came to terms with the fact that I was going to lose all of my data (at least Google has automatically backed up my images and videos every few days), and anyone important enough to me that I need their phone number I also have on facebook/google plus or see frequently enough in person that when the issue is resolved I can add their numbers again. So I performed a factory reset hoping that would fix the problem. It didn't. Today, at the behest of a friend of mine, I decided to flash a custom ROM on my phone in an effort to salvage what was increasingly likely looking to be a $600 paperweight. I've never done this before, so I followed the instructions in the following video exactly as shown, and downloaded the latest stable version of Cyanogen mod for the One X. The video can be found by googling, "HTC One X - How To Root (in-depth)". It's the first result.
Everything went... well, not smoothly. But I got there in the end. Eventually the phone rebooted, and the blue (or cyan, I suppose) Cyanogen mod logo came up with the circular loading symbol tracing around it. It stayed this way for some 30 minutes or so. I decided to reboot the phone. Same issue again. I performed a factory reset, cleared the cache, cleared the Dalvik cache, and rebooted again. Still wouldn't pass the booting process. I cleared everything a second time and even reinstalled the update.zip (which for some reason appeared as update.zip.zip in ClockworkMod Recovery v5.8.2.7... I'm wondering if that caused some issue). Still no progress. Eventually, out of frustration, I began playing around with random settings within Clockwork Mod Recovery and tried backtracking a few steps computer-side in terms of the installation process, and somewhere along the way I've really F'd things up.
And here's the current situation.
Now, whenever the phone restarts the white HTC splash comes up, followed very quickly by a black screen which flickers momentarily, and then immediately jumps to ClockworkMod Recovery (v5.8.2.7).
Whereas earlier today both fastboot and adb recognised my device, now only fastboot will. I can't get anything to appear in the adb device list anymore. I'd prefer it if people didn't immediately scream, "DRIVER ISSUE!" considering adb worked for half of the day so it seems relatively unlikely to me that that's the problem.
My computer itself won't recognise that my phone is plugged in (probably because there's no OS anymore by the seems of things). I've tried two USB cables to no avail (the first worked earlier on this afternoon, so that shouldn't be an issue).
Within the 'choose zip from sdcard' section of ClockworkMod Recovery I can choose from (other than all of the files that were already in there):
CWN-SuperSU-v0.87.zip
update.zip.zip (the double file extension really bugs me)
'mount USB storage' within ClockworkMod Recovery gives me an erroy reading, E: Unable to open ums lunfile (No such file or di...) (runs off the screen, although presumably it just says no such file or directory exists).
I can't think of anything else that's relevant or would help troubleshoot this issue. If you need anymore info please just let me know and I'll do my best to supply it (you may have to lead me through the data acquisition process, however). I'm really hoping the phone isn't completely bricked because I don't exactly have the money right now to buy a new phone - I'm a uni student who only works part time and I just bought a car a few weeks ago. Bye bye, savings.
Regards,
Scott.
man, stupid question, did you flash the boot.img in the bootloader before or after flashing the rom?
if yes,
what cyanogen did you install?
cyanogen 10.2 should work with your recovery but cyanogen 11 needs a particular one
edit:did you make a backup (in the recovery) before flashing?
Want a working phone for now, follow this :
Download this recovery and flash it :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
Download a sense 5 rom like arhd or blade from the forum here. Copy the boot.img from the rom and flash that too. Then enter the recovery and mount the sdcard as a usb mass storage device and wait as long as it needs to pop up on the pc.
Copy the rom to the sdcard and then perform a full wipe
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache, data and system
Then install the rom.zip and reboot.
Husky34 said:
man, stupid question, did you flash the boot.img in the bootloader before or after flashing the rom?
if yes,
what cyanogen did you install?
cyanogen 10.2 should work with your recovery but cyanogen 11 needs a particular one
edit:did you make a backup (in the recovery) before flashing?
Click to expand...
Click to collapse
I flashed SOME .img file, but not one called 'boot.img'. Can't remember when, unfortunately. If you find the youtube video I mentioned I followed that exactly.
No recovery unfortunately. I saw no point given that the phone was almost unusable in any form prior to me getting Cyanogen installed (it was constantly and randomly rebooting). Probably a mistake in retrospect.
Version 10.2, by the way.
Mr Hofs said:
Want a working phone for now, follow this :
Download this recovery and flash it :
Download a sense 5 rom like arhd or blade from the forum here. Copy the boot.img from the rom and flash that too. Then enter the recovery and mount the sdcard as a usb mass storage device and wait as long as it needs to pop up on the pc.
Copy the rom to the sdcard and then perform a full wipe
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache, data and system
Then install the rom.zip and reboot.
Click to expand...
Click to collapse
Can you walk me through it step-by-step. Again, I'm a total noob to this and I DON'T want to stuff this up again. Is the fact that adb (or my PC in general) isn't recognising my phone going to make this difficult? I mean how am I meant to copy anything to the SD card if I can't access it through windows explorer or via adb push?!
You need fastboot. Rename my linked recovery to just recovery.img and flash it :
Fastboot flash recovery recovery.img
Fastboot erase cache
Flash the boot.img from the rom :
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recovery and follow earlier given steps
Mr Hofs said:
You need fastboot. Rename my linked recovery to just recovery.img and flash it :
Fastboot flash recovery recovery.img
Fastboot erase cache
Flash the boot.img from the rom :
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recovery and follow earlier given steps
Click to expand...
Click to collapse
This seems to work at first - instead of jumping into ClockworkMod Recovery, after flashing the image file you gave me, it jumps into a new recovery mode. But after rebooting and going into recovery mode again it's back to ClockworkMod Recovery (I made sure to clear the cache).
You mean the old cwm. The new one is cwm based and looks just like it. If it's flashed it can't be gone without flashing something else as a recovery !
Mr Hofs said:
You mean the old cwm. The new one is cwm based and looks just like it. If it's flashed it can't be gone without flashing something else as a recovery !
Click to expand...
Click to collapse
Oh. Well it looks different the first time I boot into recovery versus the second time (PhilZ Touch 5 with a distinct purple background the first time, but the second time it goes back to a black background with blue text).
Not really sure how to proceed from here. Battery is dropping fast (9%) despite being plugged in, so I'm worried if I don't fix this ASAP it'll be forever FUBAR.
The old one does not support charging. Try flashing philz again and keep it in there and charge it up as Philz does enable charging in recovery.
If you use Fastboot flash recovery command the old one is gone.....can't come back like that !
Mr Hofs said:
The old one does not support charging. Try flashing philz again and keep it in there and charge it up as Philz does enable charging in recovery.
Click to expand...
Click to collapse
Mr Hofs, you sir are a gentlemen and a scholar! I have managed to get back to the initial bootscreen for Cyanogen mod. AND SUCCESS! IT JUST PASSED THAT SCREEN AS I WAS TYPING!
I am indebted to you, you glorious man! Thank you so very much I'll keep you guys posted (for better or worse)!
Hope it will be fine. I will keep an eye out here
Mr Hofs said:
Hope it will be fine. I will keep an eye out here
Click to expand...
Click to collapse
So I tried updating the camera (?) as a suggested update after getting back into my phone, and it's already stuffed up again. It rebooted and said that root access has possibly been lost. What's happening now?
Doesn't appear to be a big issue for now, actually. Reset, not caused any problems since then! Managed to get google apps working, and downloaded a bunch of the apps I need All's well!
Thanks one again!
Alright ! Hope i don't see you here again
Hi all - I have been searching these threads for hours and hope I can bother for some assistance. I too have soft bricked, I went to install Android Revolution HD 33.1 but missed a step. I am currently Tampered, unlocked, and S-On. I have TWRP v2.5.0.0. When I mount the sd card in TWRP, and try to copy files over, I get a message from the PC to format the sd card - I didn't for fear of wiping out everything and hardbricking the phone. I am a noob when it comes to using commands/fastboot to copy files over. I am sorry to ask, but can someone please help me with exactly what to type?
Oh - and do I need to use philz recovery since I have TRWP installed and can access?
darule_2011 said:
Hi all - I have been searching these threads for hours and hope I can bother for some assistance. I too have soft bricked, I went to install Android Revolution HD 33.1 but missed a step. I am currently Tampered, unlocked, and S-On. I have TWRP v2.5.0.0. When I mount the sd card in TWRP, and try to copy files over, I get a message from the PC to format the sd card - I didn't for fear of wiping out everything and hardbricking the phone. I am a noob when it comes to using commands/fastboot to copy files over. I am sorry to ask, but can someone please help me with exactly what to type?
Oh - and do I need to use philz recovery since I have TRWP installed and can access?
Click to expand...
Click to collapse
TAMPERED ? what does your hboot say :
1: ENDEAVORU
2: EVITA
Mr Hofs said:
TAMPERED ? what does your hboot say :
1: ENDEAVORU
2: EVITA
Click to expand...
Click to collapse
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
Radio-0-19as.32.09.11_2
As i thought. You are in the very wrong forum. Head over to the HTC ONE XL forum....AT&T .....
Mr Hofs said:
As i thought. You are in the very wrong forum. Head over to the HTC ONE XL forum....AT&T .....
Click to expand...
Click to collapse
uh oh, that doesn't sound good for me...I don't have the XL version, just the one X. Will that matter? Did I flash this baby using files for the XL when I should have used something else?
No you don't read well. You have the HTC one XL (EVITA) and this forum is for the ENDEAVORU HTC one X international version.
We here have the quad core and you there have the dual core phone !