[Q] RUU ZIP - EVO 4G Q&A, Help & Troubleshooting

What is an RUU zip compared to a non-RUU zip?

RUU zip - a PC36IMG you flash from the bootloader
Non zip - an exe file you run on the pc while the phone is connected to the pc in fastboot from the bootloader

Thank you very much.

Related

[Q] About updating to JB firmware

I want to install the JB firmware. My phone's details
hboot - 0.43.0000
CID - htc_038
mainver - 1.26.720.2
I just have to do-
download firmware.zip from this thread
then
rename first downloaded .zip package to firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
and thats it. It will it be updated without risk ? does it have anything to do with radio?
Commands are correct, radio is not so relevant.
After you flashes the firmware you need to unlock the bootloader again and flash a custom recovery again.
Then install a complete new rom

[Q] Boot loop and can't find appropriate boot.img

Hi
I've been given a One X (he bought an M8) and I thought I'd easily put on KK 4.4.4, but I have hit a brick wall.
It was running ViperX 2.6.0 with Hboot 0.95, and it's S-ON.
Well 4.4.4 needs a Hboot above 1.28, so the flashing failed.
So I did my homework and got the CID (it's HTC-023) to install the firmware so that I could update the Hboot via OTA.
So I installed the boot.img for the HTC-023 firmware and that (of course) was a an error as I didn't have a copy of the boot.img for the ViperX 2.6.0.
Then the firmware was a .rar file and didn't install anyrate.
So now it's in bootloop.
I have not been able to find a copy of ViperX 2.6.0 to extract the required boot.img
I've got TWRP with Sideloader installed, and ADB works fine.
So I am stuck (like my One X really) so any advice would be appreciated.
Thanks
Solution
I thought I should post the solution.
The essential problem was to get a Hboot 1.28 or higher so that a new version of Cyanogenmod could be installed.
On this page http://forum.xda-developers.com/showthread.php?t=1957376&page=189 is the following from ClydeB1
To flash you need to run the following commands: (It is advised to take a backup of your data and important files on your sd card)
1. Lock bootloader - fastboot oem lock
2. Boot to RUU mode - fastboot oem rebootRUU
3. Flash firmware - fastboot flash zip firmware.zip (if you get an error then rerun this command)
Note: The firmware will flash the new hboot, as well as a new stock boot.img and stock recovery.img.
To flash a custom rom you then need to do the following:
4. Unlock bootloader - fastboot flash unlocktoken Unlock_code.bin (you can use the same unlock_code file as you used previously, check your emails if you can't find it, or else reapply at htcdev.com)
5. Flash custom recovery - fastboot flash recovery nameofrecoveryfile.img
Note: If the unlock process wiped your sd card you may need to boot to recovery and mount usb storage to copy the rom file across again. If your phone won't boot into recovery then run command - fastboot erase cache and try again.
If you then wish to flash a JB custom rom:
6. Flash new boot.img from rom - fastboot flash boot boot.img
7. For good measure - fastboot erase cache
8. Boot to recovery and flash rom
I followed these steps exactly and it worked perfectly. I did need to use CWM as with TWRP the touch screen did not work.
and have more ease way to do this. You are with too low HBOOT and you can run RUU and then update the phone to latest JB because are you know witch HBoot you install to your phone

[Q] cant flash europe ruu 1.32.401.8 zip

when i try to do the fastboot flash zip command for the m9 europe ruu 1.32.401.8, fastboot crashes and i get an error "invalid sparse file format at header magi"
any ideas whats going on?
i can flash the eu exe ruu file, that installs fine - version 1.32.401.17
i need this one installed, as i think the exe file is the wrong one
eggyfish said:
when i try to do the fastboot flash zip command for the m9 europe ruu 1.32.401.8, fastboot crashes and i get an error "invalid sparse file format at header magi"
any ideas whats going on?
i can flash the eu exe ruu file, that installs fine - version 1.32.401.17
i need this one installed, as i think the exe file is the wrong one
Click to expand...
Click to collapse
are you using the regular fastboot file or the htc_fastboot file?
anandlal said:
are you using the regular fastboot file or the htc_fastboot file?
Click to expand...
Click to collapse
not sure what you mean there, but i go into the black htc screen after reboot ruu, i also cant copy the file over usb as it says the device isn't responding or its disconnected .
eggyfish said:
not sure what you mean there, but i go into the black htc screen after reboot ruu, i also cant copy the file over usb as it says the device isn't responding or its disconnected .
Click to expand...
Click to collapse
@anandlal meant that you need to use htc_fastboot instead of fastboot. htc_fastboot is capable of handling larger files. Download htc_fastboot and put it in the same folder as fastboot. It works exactly the same other than adding the "htc_" in front of the command.
this post has a link to download:
http://forum.xda-developers.com/showpost.php?p=60657724&postcount=7
jollywhitefoot said:
@anandlal meant that you need to use htc_fastboot instead of fastboot. htc_fastboot is capable of handling larger files. Download htc_fastboot and put it in the same folder as fastboot. It works exactly the same other than adding the "htc_" in front of the command.
this post has a link to download:
http://forum.xda-developers.com/showpost.php?p=60657724&postcount=7
Click to expand...
Click to collapse
Thanks! htc_fastboot was mentioned before in guides i read but it was never really explained, the ruu flashed fine and my phones up and running
thanks for your help

how to flash stock firmware in kddi??? zip dowmloaded all are corrupted!!

please someone could guide me my butterfly 3 au is bricked. bootloader is locked and i tried unlocking it but no luck. so i have download may rom they are all corrupted.. and how to flash kddi rom.
touqeer.tx said:
please someone could guide me my butterfly 3 au is bricked. bootloader is locked and i tried unlocking it but no luck. so i have download may rom they are all corrupted.. and how to flash kddi rom.
Click to expand...
Click to collapse
Flashing RUU in rebootRUU mode can restore your phone to stock, and all data will be WIPED.
First of all, please find a copy of htc_fastboot in this forum, then
- Connect it to PC
- Reboot to Download Mode
- Use htc_fastboot to go in RUU mode
Code:
htc_fastboot oem rebootRUU
- Flash RUU zip file from this thread, and yes, you cannot unzip them because they are encrypted. Just use htc_fastboot to flash it.
HTML:
https://forum.xda-developers.com/butterfly-3/help/stock-roms-m60-sense70-asia-jp-rooting-t3498350
Code:
htc_fastboot flash zip ROM.ZIP

Cannot Working Download Mode (SOLVED) for HTC 10

Greetings to everyone.
my device s-on and unlock
I downloaded the hosd image while downloading it, and now I can't open it in download mode. right now I can only access bootloader and original recovery. I couldn't even get twrp because I couldn't go into download mode and the device was s-on. what should I do?
I solved the problem
1. downloaded file
2PS6IMG_PERFUME_[email protected]80125_88.12_F_release_525207_combined_signed_2_4
2. decrypt ruu
3. hosd img install
4. fastboot oem rebootRUU and 2PS6IMG_PERFUME_[email protected]80125_88.12_F_release_525207_combined_signed_2_4 install
How to Decrypt the downloaded ruu?? When ever i decrypt it from winrar it shows file corrupt

Categories

Resources