Related
One may think that it was nearly imposible to theme or modify a Us cupcake rom from JesusFreke because of his method of saving space on the system partition. In fact we have extra room for bigger sized themes. Here I will explain to you how to easily open and close the Cramfs files to modify /system/framework folder.
Cramfs can be opened and closed only through a Linux based shell.
To do this in windows, you should download Virtualbox.
After you finish installing it go and download Ubuntu.
Open Virtualbox and click on new. Follow directions to create your new Virtualbox Ubuntu OS.
Make sure you enable usb sharing. So that you can transfer files back and forth to both OS's.
Once you got Ubuntu running, open the terminal.
Type:
Code:
sudo -s
enter your password
apt-get install cramfsprogs
This command loads the Cramfs program files to your (Virtualbox Ubuntu OS).
Once the package installs, your ready to go.
-Opening Cramfs files:
Open terminal on your Virtualbox Ubuntu OS.
Type:
Code:
cramfsck -x /home/username/Desktop/opened 'framework.cramfs'
Cramfsck -x /home/username/Desktop/opened= Where the un cramfs-ed folder will be placed and what the folder is called.
Replace username above, with your user name.
framework.cramfs= the cramfs file you want to open.(Drag and drop in terminal)
The system will create a folder called "opened" on your desktop. (Feel free the change the name of folder from /opened to your liking)
That folder contains the /system/framework files un Cramfs-ed.
-Closing Cramfs files
You MUST be logged on to ROOT before closing Cramfs!!!
You MUST use the ORIGINAL files from the framework and app's folders of CRB43-US to prevent problems!!!
Open terminal on your Virtualbox Ubuntu OS.
Type:
Code:
sudo -s
enter password
mkcramfs '/home/username/Desktop/opened' framework.cramfs
mkcramfs '/home/username/Desktop/opened'= Location of the cramfs file.(Drag and drop in terminal)
Replace username above, with your user name.
framework.cramfs=The name of the cramfs file.
The system will create a cramfs file, located in the /home folder.(Click Places)
I have uploaded a CRB43-US Theme template to make it easier for you.
CRB43_US_Theme_Template.zip
Edit the template's framework and apps files to prevent forcloser!
I hope that you find this information useful in any way.
Here's some helpfull links:
How to manuals for creating themes
How to edit XML's
How to edit .9.png
Great technique. I've not tried it yet however I tried it with Cygwin. Unfortunately I don't think I was able to get it to work with it. Any thoughts?
From the other thread:
You need linux to do this! I mean come on, Android is not a Microsoft product, it's Linux based....Time to get your hands dirty.
Click to expand...
Click to collapse
I'm going to try it on SUSE Linux soon.
blackknightavalon said:
I'm going to try it on SUSE Linux soon.
Click to expand...
Click to collapse
Well ****. I did the sudo -s and password instructions and when I typed in the "apt-get install cramfsprogs" one I got "bash: apt-get: command not found" error message. HALP!!!1!
/SUSE Linux 10
blackknightavalon said:
Well ****. I did the sudo -s and password instructions and when I typed in the "apt-get install cramfsprogs" one I got "bash: apt-get: command not found" error message. HALP!!!1!
/SUSE Linux 10
Click to expand...
Click to collapse
apt-get is for Ubuntu and (i think) other Debian based Linux system. You'll need to use Redhat Package Manager (rpm) or some similar package manager.
http://en.opensuse.org/Libzypp/Package_Management
-Andy in Indy
Binary100100 said:
Great technique. I've not tried it yet however I tried it with Cygwin. Unfortunately I don't think I was able to get it to work with it. Any thoughts?
Click to expand...
Click to collapse
I tried it through Cygwin and I gave up because of the long process. I had to download a mirror site to download the cramfs program. Then I had to relocate most of the folders I wanted to modify because of that shell. Then I got more errors, so I said ...... that!!! And did it the way I posted it. I'll try to get it running on Cygwin and I'll let you know if I'm successful. FYI- you have alot more options on Ubuntu to Open ,see, and modify files on the Android packages, then you would on Cygwin.
So this maybe a newb question for some of you but I installed VirtualBox and Ubuntu 9.04 and followed the instructions. But I've hit a bump.
When I opened Terminal and entered sudo -s it will not let me enter my password. It just stays as a black box that doesn't move. I can type everywhere else... just not there for some reason. What am I missing?
Binary100100 said:
So this maybe a newb question for some of you but I installed VirtualBox and Ubuntu 9.04 and followed the instructions. But I've hit a bump.
When I opened Terminal and entered sudo -s it will not let me enter my password. It just stays as a black box that doesn't move. I can type everywhere else... just not there for some reason. What am I missing?
Click to expand...
Click to collapse
It doesn't show **** or anything, but its entering. Type password and press enter!
RichieDaze said:
It doesn't show **** or anything, but its entering. Type password and press enter!
Click to expand...
Click to collapse
Heh. I was hoping it was that easy. Thanks. I'm playing with it now.
Andy_in_Indy said:
apt-get is for Ubuntu and (i think) other Debian based Linux system. You'll need to use Redhat Package Manager (rpm) or some similar package manager.
http://en.opensuse.org/Libzypp/Package_Management
-Andy in Indy
Click to expand...
Click to collapse
Okay, I checked with my laptop's bin folder and I have rpm installed already. Today's n00b question is "now what?"
Wubi
Why don't you guys just use the wubi installer for ubuntu?
Its pretty mind numbingly easy to set up... and i haven't had any issues with it for the last month I've been using it.
http://wubi-installer.org/
then you can just use apt
jonnybueno said:
Why don't you guys just use the wubi installer for ubuntu?
Its pretty mind numbingly easy to set up... and i haven't had any issues with it for the last month I've been using it.
http://wubi-installer.org/
then you can just use apt
Click to expand...
Click to collapse
The only thing I didn't like about that installation was that I had to reboot to use either OS. With Virtual Box I can run my Os + 1,2, or 3 other OS's at the same time. That how I had it installed before I started using the Live cd to do the work. Thanks for giving us an other option. I guess its up to the users preference. I do recommend its use if you don't mind to reboot.
n00b question time: Would I be able to use the mkfs.cramfs program using SUSE? If so, what are the terminal codes?
/seriously stuck on this
its not working wat am i doing wrong
[email protected]:~$ sudo -s
[email protected]:~# ******
bash: ******: command not found
[email protected]:~# apt-get install cramfsprogs
Reading package lists... Done
Building dependency tree
Reading state information... Done
cramfsprogs is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[email protected]:~# cramfsck -x /home/ubuntu/Desktop/opened 'framework.cramfs'
cramfsck: stat failed: framework.cramfs: No such file or directory
[email protected]:~#
Click to expand...
Click to collapse
the ****** is the password.
i have the framework.cramfs
i also have the CRB43_US_Theme_Template.zip file on the ubuntu dektop
i tried this also
[email protected]:~# cramfsck -x C:\Documents and Settings\******\Desktop 'framework.cramfs'
usage: cramfsck [-hv] [-x dir] file
-h print this help
-x dir extract into dir
-v be more verbose
file file to test
[email protected]:~#
Click to expand...
Click to collapse
can someone help
bboy_201 said:
its not working wat am i doing wrong
can someone help
Click to expand...
Click to collapse
Did you pull the cramfs file from the zip onto your desktop before you dragged it onto the terminal?
yes i did..
its on my destop for my windows n my ubuntu desktop
Finally, progress!
Just to update you guys on one thing: After roughly 3 weeks of blindly thrashing about SUSE Linux Enterprise Desktop 10 and its buggy BIOS screen like a n00b, I FINALLY got installed Debian on my laptop! Next step: Figure out how to make a cramfs image and test-port my personal modded Moon Dust theme (with the Firefox logo on the browser and Carbon Black trashcan) before I actually start porting other devs (and them submitting the ports to the original devs for their approval).
Am I the only one actually working on this?
Progress Part The Second
blackknightavalon said:
Just to update you guys on one thing: After roughly 3 weeks of blindly thrashing about SUSE Linux Enterprise Desktop 10 and its buggy BIOS screen like a n00b, I FINALLY got installed Debian on my laptop! Next step: Figure out how to make a cramfs image and test-port my personal modded Moon Dust theme (with the Firefox logo on the browser and Carbon Black trashcan) before I actually start porting other devs (and them submitting the ports to the original devs for their approval).
Am I the only one actually working on this?
Click to expand...
Click to collapse
I had a few bugs to work out, but now Debian is working as good as I can hope to get it working on my laptop. Now I need to compare the differences between the CRB43 framework-res images and RC33's. After that, it'll simply be a matter of a one-for-one swap with the instructions courtesy of OP.
The main thing is that I got the "apt-get install cramfsprogs" part working!
[New Question.] So let's start with the first things I'll need to know.....
how do I build root into a stock rom?
How do I create a flashable .Zip from scratch for my rom to go in?
How do I edit the text from cwm when I flash this rom?
And yes this thread is going to become a guide once I learn all I need to know about Building roms for the epic =]
[ANSWERED]So I'm thinking about kicking windows out the, erm, window lol..... I want to start learning about developing and want to start a few projects to pay back the community..... I'm guessing I can't develop on windows so I was wondering what would be the best version of Linux to use?..... and would it be possible to port a driver from windows to Linux?[ANSWERED]
A little how to for this guide..... Thank you mkasick =]
mkasick said:
Download Superuser su-2.3.6.3-efgh-signed.zip. Unzip, and copy "su" to "/system/xbin/su" on your phone, and run:
Code:
chown root.shell /system/xbin/su
chmod 4755 /system/xbin/su
from an adb root shell or terminal emulator. Then optionally copy Superuser.apk to /system/app. The part is optional because you can also install it to /data like a normal .apk, or install it from the Market, there's nothing special about it.
Grab tws_fix_ringer_vib_silent-EC05-deodex.zip (from this thread). Unzip and delete "META-INF/MANIFEST.MF", "META-INF/CERT.SF", "META-INF/CERT.RSA", and "system/framework".
Now, place whatever you want in the appropriate subdirectory of "system", creating them as necessary. Edit "META-INF/com/google/android/updater-script" to match the description of whatever you want to flash. And zip everything back up, e.g.,:
Code:
zip -9r update-unsigned.zip META-INF system
Note the zip should contain "META-INF/com/google/android/update-binary" and "META-INF/com/google/android/updater-script", in addition to anything you've placed in "system".
At this point the update.zip is flashable in ClockworkMod, but it's nice to sign it so that it can also be flashed in a test-keys stock recovery. To do so, download the attached "signapk.tar.gz". Extract it, then run:
Code:
java -jar signapk/signapk.jar -w signapk/testkey.x509.pem signapk/testkey.pk8 update-unsigned.zip update.zip
The resulting update.zip of which you can now distribute.
As for the "from scratch", update-binary and signapk.jar are both build from Froyo AOSP sources, specifically the android-cts-2.2_r2 branch. If you get an AOSP build environment setup as described, update-binary is made with:
Code:
make out/target/product/generic/system/bin/updater
cp -a out/target/product/generic/system/bin/updater update-binary
and signapk.tar.gz with:
Code:
make out/host/linux-x86/framework/signapk.jar
mkdir signapk
echo "java -jar signapk.jar -w testkey.x509.pem testkey.pk8 update-unsigned.zip update.zip" > signapk/README
cp -a out/host/linux-x86/framework/signapk.jar build/target/product/security/testkey.* signapk
tar cf signapk.tar signapk
gzip -9 signapk.tar
See above, but basically just modify the "ui_print" strings in "META-INF/com/google/android/updater-script".
Click to expand...
Click to collapse
If you've never used Linux before I would recommend using something like Mint just to get your feet wet.
Oh I've used mint, opensuse,Ubuntu, fedora, and debian before..... but I don't know which one is best for developing roms and compiling kernels and all that jazz..... and I don't think my wifi USB has a native driver for Linux so that's what's really keeping me from overwriting windows.....
theduce102 said:
Oh I've used mint, opensuse,Ubuntu, fedora, and debian before..... but I don't know which one is best for developing roms and compiling kernels and all that jazz..... and I don't think my wifi USB has a native driver for Linux so that's what's really keeping me from overwriting windows.....
Click to expand...
Click to collapse
I use Ubuntu, I know a lot of people use gentoo but it's definitely not like debian based distros lol
Like you said with the driver, it all comes down to what is available and compatible with your system. I recommend Ubuntu just because of the (duh) massive support base compared to other distributions in terms of drivers and such.
Sent from my SPH-D700 using XDA Premium App
thomasskull666 said:
I use Ubuntu, I know a lot of people use gentoo but it's definitely not like debian based distros lol
Like you said with the driver, it all comes down to what is available and compatible with your system. I recommend Ubuntu just because of the (duh) massive support base compared to other distributions in terms of drivers and such.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Thank you for the advice =]
EDIT: I don't know much about command lines..... what do people mean when they say "cd" like "cd to the folder in the terminal"?
Change Directory
So something like cd /sys/app nvigates you in the "app" directory within the system *folder* you will then be installing / modify / editing or whatever to the files in that specified directory.
Okay well I just installed Ubuntu 11.04 on top of vista and I can already tell I'm going to be spending most of my time on Linux instead of windows if I can get this driver installed without causing wwIV
EDIT: Okay so everytime I type "sudo" to gain root the terminal asks for my password but it won't let me type it???? What do I dooo!!!!
For application and kernel development it doesn't really matter which distribution you're running as the commonly used packages (e.g., Android SDK/NDK, Java, Sourcery G++ Lite) are fairly agnostic.
If you wanted to compile the AOSP source tree, Ubuntu might be the best route, only because the documentation uses Ubuntu configurations and package names as examples.
And yes, it worth going through command line tutorials. I don't recommend that one specifically, it was just the first hit on Google.
As for your sudo issue, just type the password. It doesn't show you the password as you type it for privacy purposes.
mkasick said:
As for your sudo issue, just type the password. It doesn't show you the password as you type it for privacy purposes.
Click to expand...
Click to collapse
Yeah I went ahead and typed it but no go..... ill boot back into Ubuntu and try it again but if its still not working what's my next move? Sorry for being such a Linux noob in xda lol
theduce102 said:
Yeah I went ahead and typed it but no go..... ill boot back into Ubuntu and try it again but if its still not working what's my next move? Sorry for being such a Linux noob in xda lol
Click to expand...
Click to collapse
Did you install or are you running live?
Got this from http://ubuntuforums.org/
You can't login as root. Ubuntu does not use the root account. You can use sudo if you need to do anything as root, see: https://help.ubuntu.com/community/RootSudo
As far as I know, the password on the live CD is empty. Just press Enter when it asks for a password after entering "sudo <command>".
Well I did the dual boot option so when I boot my system I choose between Ubuntu and vista..... I had to choose a password and it worked when I typed it this time..... but now I have another problem lmao.....
I can enter "sudo make" and it does its thing, then I enter "sudo make install" and all goes well, but then I enter "sudo modprobe rt3572sta" and it returns "Invalid module format".....
I copied the entire terminal convo if it would help I can post it?
Any ideas?
EDIT: yeah I made an account over their at the forums but it seems pretty slow especially when I need help with one specific device?
One way to avoid the nightmare of patching together a working wifi driver in linux, install it in a VM (Virtualbox or Vmware) on the vista side. Then you can use the wifi adapter through the windows driver.. And then you don't have to do a full reboot to get to windows or ubuntu/mint.. (love Mint btw.. it lives in my VM, laptop, seedbox and soon to be server)
pvtjoker42 said:
One way to avoid the nightmare of patching together a working wifi driver in linux, install it in a VM (Virtualbox or Vmware) on the vista side. Then you can use the wifi adapter through the windows driver.. And then you don't have to do a full reboot to get to windows or ubuntu/mint.. (love Mint btw.. it lives in my VM, laptop, seedbox and soon to be server)
Click to expand...
Click to collapse
Lol I once compiled a driver to use my blackjack 2 as a modem on a 300mhz thin client rdp computer that I got puppy linux to run on in 2007
Sent from my SPH-D700 using XDA Premium App
pvtjoker42 said:
One way to avoid the nightmare of patching together a working wifi driver in linux, install it in a VM (Virtualbox or Vmware) on the vista side. Then you can use the wifi adapter through the windows driver.. And then you don't have to do a full reboot to get to windows or ubuntu/mint.. (love Mint btw.. it lives in my VM, laptop, seedbox and soon to be server)
Click to expand...
Click to collapse
Good suggestion, makes things a lot easier. The only thing is performance, you will be running on (usually) half the power of the computer which will slow compile times to a crawl for example.
As far as the root password goes, use the passwd command to change it:
Code:
sudo passwd root whateverpassword
pvtjoker42 said:
One way to avoid the nightmare of patching together a working wifi driver in linux, install it in a VM (Virtualbox or Vmware) on the vista side. Then you can use the wifi adapter through the windows driver.. And then you don't have to do a full reboot to get to windows or ubuntu/mint.. (love Mint btw.. it lives in my VM, laptop, seedbox and soon to be server)
Click to expand...
Click to collapse
Thanks that's what I was thinking about doing but like thomasskull said it likely gonna take a dump on performance but may be the only choice I have....
thomasskull666 said:
Good suggestion, makes things a lot easier. The only thing is performance, you will be running on (usually) half the power of the computer which will slow compile times to a crawl for example.
As far as the root password goes, use the passwd command to change it:
Code:
sudo passwd root whateverpassword
Click to expand...
Click to collapse
Well I don't really care much about changing password anymore cause I was finally able to enter the password but as always there's another problem..... ill probably post the terminal readings later on tonight when I get back to my computer.... and as for using a virtual machine, is there another way to go without dumping performance and without dealing with installing drivers through the terminal.....
Thank you all so much.... you guys have no idea how much I appreciate your help =]
So I downloaded VMware Player, where do I go from there to get the drivers installed so that I can reboot into Ubuntu and use the wifi card?
Well, under vmware workstation you should be able to just install a vm with just the iso file or the cd of the ubuntu build you want to install, its prescripted, and easy t use. With vmware workstation you can define hoow many proscessors you want to use, threads, ram, w/e... then vmware also installs a network service under windows that uses windows to transfer the network data into your vm. No need to configgure your wifi under linux anymore
Also, I think you're missing the point of a Virtual Machine. A VM runs alongside your current OS install. Software like VMWare Workstation acts as if its a virgin computer and makes an image file on your hard drive that acts as a hard drive for the VM. You can be running windows and linux simutaneously with a VM. For instance, whenever I develop or need linux, I open my vm nd use it on my seccond monitor. One monitor windows, the other linux, and you can even drag and drop **** to each other os. Its amazing. Just make sure you allocate uenough threads and ram to your vm and you should be fine.
Can I use all the ram and threads because I only have 1GB ram and a 3GHhz dual core processor..... or is that enough to run it
with only 1gb of ram, you probably wouldn't want to run a VM since you'd really not want to use more than 512mb of your total 1gb.. With that little ram, your best choice is the dual boot setup.
Ubuntu On Epic4G Touch Has Arrived!!!
Disclaimer...I am not responsible for bricked or soft bricked phones. I am also no responsible for files lost phones damaged and commands entered wrong on your part. I also would like to say that i did not in anyway shape or form come up with this method to get Ubuntu to run on Epic4G Touch i saw the GUIDE in the Epic4G forum and tested it out and it worked so this was simply trial and error.
Thanks To:BThomas22x Over at the Epic4G Forum for Creating this GUIDE. Also thanks to the Developer of the new script KellyLewis3985
Whats NeededMust be Rooted, Must have busybox, Must have superuser, Must have Android SDK, Must Download AndroidVNC & Android Terminal Emulator from market and of course patience.
Directions
1. Download File i attached at the bottom unzip and create a new folder called Ubuntu and place all the files inside of it and put on the root of your SD card.
2. Unmount SD card
3. Go into command prompt and cd to SDK. (cd C:/sdk/platform-tools) Or were ever you cd to run ADB commands
4. Now once your device is connected and you see your serial number listed type adb shell and hit enter
5. Then type su and hit enter
6. Now we want to cd into that Ubuntu folder on your sdcard so simply type cd /sdcard/ubuntu and hit enter
7. Ok now lets install ubuntu by typing sh ubuntu.sh and hit enter let it do its thing and after it does you should see at the bottom to enter type "bootlinux"
8. Type bootlinux and hit enter once you see the prompt "[email protected]" then you have just installed ubuntu side by side with your Android device!
VNC Setup
Now type the following commands in orderrm -rf /tmp/.X*
export USER=root
vncserver -geometry 1280x800
At this point everything should be setup and ready to rock and roll after shutting down your phone or shutting down VNC you will have to go into Terminal on the phone and type...
1. su
2. bootlinux
3. Once prompted with [email protected]
4. rm -rf /tmp/.X*
export USER=root
vncserver -geometry 1280x800
5. And now you have installed Ubuntu, Setup VNC, And now know how to get back into Ubuntu after a shut down or VNC exit.
Android VNC Setup Part2
Nickname: root
Password: ubuntu
Address: localhost
Port: 5901
If you have any questions,problems or comments please write on the thread or PM me thanks and ejoy!
DOWNLOAD LINK
http://www.multiupload.com/O8QVR5H203
screenshots please?
Thank you! This is awesome.
I wonder if the mhl adapter to a monitor. With a bluetooth mouse and keyboard would work...
i will post screenshots tomorrow def and im sure the mouse and keyboard will work and believe it or not its pretty fast
can you make and receive txt messages and calls in ubuntu?
Thank you!
Sent from my SPH-D710 using xda premium
your not changing from android to ubuntu your running them side by side threw vnc so there for you still will get calls and text
This sounds fun, I really want to give this a try... Anyone try it out yet?
Edit:
Holy big download batman, I'll wait until I'm on wifi and not tethering at 300kb LOL
omg thank you so much
Trying this weekend thanks... What version of ubuntu is this?
Sent from my SPH-D710 using XDA App
If you put the folder on your external sd card, you'll need to update the path in ubuntu.sh
But for some reason all of my busybox commands are failing. I've even reinstalled it several different times from different installers in the market. Any ideas?
donny could too please put a link to the original guide in the OP for quick reference
yes sorry guys im driving to work right now lol i will post the link and screen shots
ok guys heres the screen shots and after this post i will post the link to the original GUIDE but if anyone is having problems just PM me i dont bite lol
And heres the link to the original GUIDE
http://forum.xda-developers.com/showthread.php?t=823370
guys i forgot to tell you in the main post make your color 24 Bit
When trying this I get the error "VNC connection failed! localhost/::1:5901 - Connection refused" when trying to connect after all of the installation commands.
try setting the port to 5900 or 5902 or 5903 etc if that dont work let me know and will go from there
donnyevo4g said:
try setting the port to 5900 or 5902 or 5903 etc if that dont work let me know and will go from there
Click to expand...
Click to collapse
None of those worked, what would I have to do to erase all the files and start from scratch? I feel it may have been a bit of user error.
Those of you who have this working, what kernel are you guys using? I'm on the newest LOSt stable, which now has working busybox, but the modprobe command still fails.
I didn't have a GN until this week so my only LIMITED experience was with my nephew's GN and I was not able to connect it to my Ubuntu 11.10, 11.04, 10.10 or Mint 12. I got my own this week and started the search. Here is how you do it courtesy of Shannon VanWagner
and his website Humans Enabled
Shannon's info:
https://plus.google.com/115207567016362184954/about
Thanks Shannon. Here is the what you should do: again all credit goes to Shannon VanWagner. Fire up a terminal session:
1-
Code:
sudo apt-get install libusb-dev
2- download libmtp tar.gz from http://sourceforge.net/projects/libmtp/files/libmtp/
3-cd to the directory you downloaded to: Download in this case, case sensitive
Code:
cd Downloads
4- extract the tar package
Code:
tar xvf libmtp-1.1.1.tar.gz
please make sure you check the file version, this file changes as it is updated and change it accordingly per the above website
5- cd to the newly created folder that has the extracted file:
Code:
cd libmtp-1.1.1
again don't forget to change the name if the version has changed
6- compile and install: do each step separately
Code:
./configure --prefix=/usr
Code:
make
Code:
sudo make install
7- while in the same directory in the terminal, copy the rules from there to the udev folder:
Code:
sudo cp 69-libmtp.rules /etc/udev/rules.d
8- install gMTP:
Code:
sudo apt-get install gmtp
9- open up gMTP, go to edit/prefrences and check the box for Always Show Download Path. This way when you are downloading from the phone to your computer, you are asked to choose a location. Use the Add button to upload from your Linux Box to the phone. Delete does, well, Delete a file.
Thanks so much for this. I was having all kinds of problems! Worked flawlessly!
I'm just wondering, why people still using USB cable for file transfers? There's gazillion threads here about broken USB ports and all of them are reall. I had my self that problem on SGS2 and since then i started to use Wifi Explorer. It's just safer and easier.
Don't take this as thread spoiling, i'm really thankful to everyone who shares info. l'm just trying to warn you, because USB port problem does exist even if you're extremely careful as i am.
Sent from my super Galaxy Nexus plus®
I love Wifi Explorer as well but you do run a much greater risk of a corrupted file over wifi as opposed to usb.
I didn't have to do step 2. All I did was install libusb-dev and install gMTP and it worked.
That said I hate what google did here! I can no longer play music via usb on my car deck because of this
MS. said:
I'm just wondering, why people still using USB cable for file transfers? There's gazillion threads here about broken USB ports and all of them are reall. I had my self that problem on SGS2 and since then i started to use Wifi Explorer. It's just safer and easier.
Don't take this as thread spoiling, i'm really thankful to everyone who shares info. l'm just trying to warn you, because USB port problem does exist even if you're extremely careful as i am.
Sent from my super Galaxy Nexus plus®
Click to expand...
Click to collapse
Thanks for the suggestion. I do use that especially since Amazon App store had it as the Free Paid app of the day a few months back. But you still need your wired connection for important files like radios, kernels, and roms. hate corrupted radios
Then i must be lucky, had no corrupted transfers yet (or at least i didn't notice that)
apt-get install gmtp fails.... I get the following::
Reading package list... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package gmtp
What now? I'm running 64bit Ubuntu 10.04 LTS
Hello, I wonder if can I expect a Fedora solution?
DAG425 said:
apt-get install gmtp fails.... I get the following::
Reading package list... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package gmtp
What now? I'm running 64bit Ubuntu 10.04 LTS
Click to expand...
Click to collapse
I'm sure you did sudo apt-get, right?
gMTP is in the Ubuntu software center. I guess you can get it that way too.
Yes, any time i know im gonna need sudo multiple times i just run root terminal.... Got it from package manager! Thanx!!
Anyone else noticing massive slow ups when transferring files? The only things that happens quick is to download something from the device, uploading, and deleting take forever.
Thanks man for the guide.
its working but its supposed to be so slow(connect takes so long)??
Hi I've followed your guide down to the letter but my Nexus won't mount gMTP hangs and refuses to respond. What do you suggest?
emmib said:
Hi I've followed your guide down to the letter but my Nexus won't mount gMTP hangs and refuses to respond. What do you suggest?
Click to expand...
Click to collapse
a little info may help. What version of Ubuntu are you running? Any errors?
You may also want to look in to mtpfs which is a FUSE filesystem providing access to MTP devices. It's easy to use and with correct permissions you can mount the device as a user.
I've been using it and there is a long pause mounting the device for some reason but read / write speeds are very good. When the phone is connected you simply mount it with:
mtpfs [mount point]
Lost Dog said:
You may also want to look in to mtpfs which is a FUSE filesystem providing access to MTP devices. It's easy to use and with correct permissions you can mount the device as a user.
I've been using it and there is a long pause mounting the device for some reason but read / write speeds are very good. When the phone is connected you simply mount it with:
mtpfs [mount point]
Click to expand...
Click to collapse
so you just connect the point and type the above? Do you have to specify the mount point? What do you use?
loveubuntu said:
so you just connect the point and type the above? Do you have to specify the mount point? What do you use?
Click to expand...
Click to collapse
Make a directory to mount it at (~/phone or something). Connect your phone in MTP mode then type:
mtpfs ~/phone
It's user space so you don't need to use su or sudo. You do however need to have FUSE support in your kernel. You may need some of the other dependencies but if you install mtpfs in mint it should pull those in (I'm using Mint 12).
loveubuntu said:
a little info may help. What version of Ubuntu are you running? Any errors?
Click to expand...
Click to collapse
I'm terribly sorry about that, how rude of me XD I'm not running Ubuntu, I'm running Linux Mint 12, 32-bit. My Nexus is completely stock, GSM, running 4.0.2.
I finally can transfer files between ubuntu and my galaxy Nexus. Dumb google.
It took me days to find this thread. Wow you are amazing. I have tried different tutorial that would freeze my pc. Thanks for for sharing.
The keystone of this guide: make ADB & fastboot working in Ubuntu, when nothing else helps with with Windows. Resent Windows OS versions are getting less flashing-friendly and some brands (like Samsung) release new devices on the market without compatible USB drivers. Before losing countless hours trying to solve the problems, try this, possibly very easy solution.
Compatible devices: ADB will work on nearly all devices, fastboot should be also usable for very most of the devices with bootloader mode: Nexus, HTC, Sony etc.
The guide is posted here in Nexus 7 (2013) thread for high amount of reported bootloops right after unlocking the bootloader- or problems with executing fastboot commands in Windows, which must work to unbrick the device.
DISCLAIMER:
Code:
* [I]I am not responsible for bricked devices or PCs, personal crisis, depressions[/I]
* [I]sleeples nights, termonuclear wars, electricity blackouts, short circuits,[/I]
* [I]or for bad weather in your region that will brick your Android device or your PC.[/I]
* [I]I try to help here, but it may not work for you. You do all on your own risk.[/I]
Click to expand...
Click to collapse
INSTALL ONLY FASTBOOT :
Windows can cause so many problems, that sometimes ADB & Fastboot simply won't work.
Run therefore ADB or fastboot in Ubuntu if Windows fails.
Installing ONLY fastboot in Ubuntu (should work with 10.x, 11.x and 12.x)
(internet connection required)
Run in the Terminal:
Code:
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
Reboot isn't required.
Save all the flashing files on home folder, or navigate with "cd" to your files.
Happy flashing!
For the case it doesn't work after this, try THIS method which is little bit more complicated, but should work in actually all Linux OS variants.
Click to expand...
Click to collapse
INSTALL ADB AND FASTBOOT :
To fix a bootloop, for unbricking, to root, to unlock/relock the bootloader, for flashing of a stock firmware, kernel, or recovery: for all those things fastboot must work reliably. And in Windows, it sometimes simply won't work at all, whatever you try.
Windows OS is complicated. And needs drivers at all times. Successful use of ADB or Fastboot with Windows is totally dependent on perfectly installed drivers. And there we have the source of many problems. As way around all those in fact Windows related promblems, we will use here Linux instead of Windows. Linux needs no drivers. Linux is free. Linux needs no antivirus software. Linux gets optimized day by day. Your Android device is Linux based.
After reading how many users encounter day by day countless issues by attempt to run fastboot and ADB commands (especially here in Nexus threads), I've decided to make this guide. There are some longer and complicated guides here around. I like fast, easy and secure way- so I hope this will help.
STEP 1: how to run Linux on Windows PC
There are many variants of Linux OS, but to keep the things really simple I will refer here entirely to the most popular variant of Linux: Ubuntu.
Windows users have three common ways to run Ubuntu on their Windows PC:
OPTION 1: installing Ubuntu permanently (my personal preference)
Pros: you will gain Ubuntu OS besides Windows and possibility for dual-boot. Reboot between Windows and Ubuntu takes about 1 minute. Full functionality of both operating systems.
Cons: in very seldom cases the installation of Ubuntu doesn't work flawless and if Ubuntu gets installed on the same HDD, Windows OS can get partly damaged or unusable, or has to be re-installed. Part of HDD memory space has to be permanently reserved for Ubuntu (min. 10GB recommended) and won't be accessible from Windows anymore.
OPTION 2: running Ubuntu from bootable live-CD
Pros: Ubuntu won't get physically installed, it runs 100% virtually from bootable live-CD and uses only RAM of the PC. People who don't desire to install Ubuntu permanently will have no changes on their PSs. No potential risks due to unsuccessful installation. In general, works with most of the computers.
Cons: No data or settings can get permanently saved in Ubuntu, especially Linux novices will have to learn quickly about setting the permissions: each time again after restarting Ubuntu session from the live-CD. Ubuntu is considerably slower this way.
OPTION 3: running Ubuntu from VirtualBox (in your Windows OS)
Pros: easy way to run Ubuntu directly from Windows in kind of "sandbox"
Cons: doesn't work well with some PCs
STEP 2: INSTALLING FASTBOOT & ADB IN UBUNTU
Now when your Linux OS is working, we can finally go for it!
Make sure to have internet connection
open the Software Center in Ubuntu
install openjdk-7-jdk
install Eclipse
download adt-bundle for your respective OS (32-bit or 64-bit version) from http://developer.android.com/sdk/index.html
extract the folder and paste the extracted folder to prefered folder and rename it to your prefered folder name
run the Terminal and navigate (cd) to the unzipped folder into "platform-tools"
Example for novices: I have pasted my extracted adt-bundle folder under "Home" and renamed it to "SDK", so I have to navigate to my platform-tools this way:
Code:
cd /home/tetakpatak/SDK/sdk/platform-tools
After this, you should be able to execute all the ADB and fastboot commands
Now just mind to paste all the files you desire to flash or push or sideload into your "platform-tools" folder!
Happy flashing!
Click to expand...
Click to collapse
DOWNLOAD LINKS
Ubuntu OS: DOWNLOAD HERE
Virtual Box: DOWNLOAD HERE
Warning: VirtualBox supports only the 32-bit version of Ubuntu, so also owners of 64-bit PC-systems should make sure to download the 32-bit version of Ubuntu, and not the 64-bit version!
ADDITIONAL INFORMATION AND USEFUL LINKS
Checklist for ADB:
for using in Android OS make sure to enable USB debugging under "developer options"
ADB works in Android OS and in the recovery mode, but not in the bootloader mode
make always sure at the very beginning that your ADB connection works by typing "adb devices" (the response must include a serial number on the left and "device" right after it!)
Basics about ADB: check for example this excellent ADB guide
Checklist for fastboot:
fastboot commands can be executed only in bootloader mode
fastboot commands will work also if USB debugging was disabled
make always sure at the very beginning that your fastboot connection works by typing "fastboot devices" (the response must include a serial number on the left and "fastboot" right after it!)
by using fastboot for the first time on a PC or Android device, never start with bootloader flashing! Missmatched bootloader flashing can hard-brick the device. Rather first execute "fastboot reboot-bootloader" and try to flash a kernel or recovery to make sure flashing commands are working and the connection is established.
Flashing with fastboot (example Nexus 7 v2012): check this excellent guide by @comminus
My self made video of flashing a full factory image with manually done fastboot commands in real time (example Nexus 7 v2012):
Click to expand...
Click to collapse
Please use "thanks" button beyond my posts if you find this guide useful. I've spent my time to help you, who read this.
TROUBLESHOOTING:
Occasionally, the device's storage doesn't get recognized in Ubuntu (something like MTP Camera error, can't mount camera, or so). The source of this problem is, that Ubuntu 12.04 doesn't support MTP natively yet, hopefully 13.04 will do.
This is the solution that should work with Ubuntu 12.04, enter in Ubuntu Terminal following:
Code:
sudo add-apt-repository ppa:langdalepl/gvfs-mtp
sudo apt-get update
sudo apt-get install gvfs
restart your PC, now everything should work (enable USB debugging if it doesn't)
If this method wasn't successful, you can try alternatively to do the same thing with these two repos:
Code:
sudo add-apt-repository ppa:webupd8team/unstable
sudo apt-get update
sudo apt-get install go-mtpfs
After the last command just reboot the PC
Also this repo could work:
Code:
sudo add-apt-repository ppa:langdalepl/gvfs-mtp
sudo apt-get update
sudo apt-get dist-upgrade
If none of both repos works and you want to uninstall both of them, just enter:
Code:
sudo ppa-purge ppa:webupd8team/unstable
sudo ppa-purge ppa:langdalepl/gvfs-mtp
great tutorial!
tetakpatak said:
reserved
Click to expand...
Click to collapse
Hey brother, great tutorial...
I know this will help so many people in the future and i love to see anything linux based! I have been using linux/bsd based operating systems for years and i love the way linux and android work together!
Take care my friend and thanks again for all of the hard work.
-droidshadow
You can also put your computer in test mode which bypasses msm kernel mode code signing policy. This will enable the ability to install the drivers needed. From the administration profile on your PC open a command prompt and type
Bcdedit.exe -set TESTSIGNING ON
Then restart your computer.
Edit: This is for Windows 7 X64 and Windows 8 users alike.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
I keep getting a keyserver error when entering first command.
Got it to install the problem I see now is with java
Steve One said:
I keep getting a keyserver error when entering first command.
Click to expand...
Click to collapse
Which Linux version do you use?
tetakpatalked from Nexus 7 flo
tetakpatak said:
Which Linux version do you use?
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Mint15
Here's another shot
Steve One said:
Here's another shot
Click to expand...
Click to collapse
Please google a bit, I think you need another repo for Mint 15, I think I saw it somewhere in www last week. Sorry, I can't research right now until end of week.
tetakpatalked from P5110
tetakpatak said:
Please google a bit, I think you need another repo for Mint 15, I think I saw it somewhere in www last week. Sorry, I can't research right now until end of week.
tetakpatalked from P5110
Click to expand...
Click to collapse
I'm truly stumped went from Windows Vista to all Linux to be able to use adb and still can't get it to recognize my device.
I installed the java 7 sdk but it still doesn't recognize my device..........guess I will try to get a Petra CD don't know what else to do ha ha and I thought this was the easy way to get adb to work. Thank you for your help kind Sir.
Steve One said:
I'm truly stumped went from Windows Vista to all Linux to be able to use adb and still can't get it to recognize my device.
I installed the java 7 sdk but it still doesn't recognize my device..........guess I will try to get a Petra CD don't know what else to do ha ha and I thought this was the easy way to get adb to work. Thank you for your help kind Sir.
Click to expand...
Click to collapse
It should definitely work with Ubuntu versions 10. 11. and 12.04 even without extra installing Java. I didn't try it with other Linux versions.
Which Linux did you install? Did you enable USB debugging?
Check in www as there are different repos available for ADB and fastboot.
Opening post updated: added procedure for enabling all ADB and fastboot functions in Ubuntu, for the short way with enabling fastboot only doesn't work with every Ubuntu version.
tetakpatalked from the legendary i9000