I installed clockworkmod on my Defy, tried to reboot into custom recovery, got the M logo loop. So I flashed Nordic via RSD and now I get stuck at the Android logo loop. I've done it twice and don't know what else to do. Why can't I sucessfully flash Froyo/Nordic? Also, RSD stops at "100% Please manually power up this device"
Flash bootloader, then flash again, that's what I did when I had boot animation loop,
Sent from my MB525 using XDA App
Buddy u need to flash full Sbf.go for Nordic..
Sent from my MB525 using XDA App
Just press volume down when blue light flashes...u will get into recovery and then normal boot
Hi ..
two days back i got my defy .. n i did root it with super one click method..
installed the 2nd init recovery that installs the bootmenu with hw CWmod recovery..
and then i install Cyanogenmod 7.1 latest ... 2.3.7..
all was well ... but i installed busybox from market ... I dont know what happenned... i did a reboot since then i am stuck n google logo...
I am only able to access the stock recovery ... and that's not helping me ...
Things i am still able to do ....
go ito stock recovery .... i did factoy reset and did REBOOt stll same issue...
I am able to go into booloader mode and RSD lite does say my device is connected....
can flashing a sbf file resolve the issue... IF yes please tell me which one to flash ...as I am already on Cyanogen Mod 2.3.7... Please help...
solved!!
gaushim said:
Hi ..
two days back i got my defy .. n i did root it with super one click method..
installed the 2nd init recovery that installs the bootmenu with hw CWmod recovery..
and then i install Cyanogenmod 7.1 latest ... 2.3.7..
all was well ... but i installed busybox from market ... I dont know what happenned... i did a reboot since then i am stuck n google logo...
I am only able to access the stock recovery ... and that's not helping me ...
Things i am still able to do ....
go ito stock recovery .... i did factoy reset and did REBOOt stll same issue...
I am able to go into booloader mode and RSD lite does say my device is connected....
can flashing a sbf file resolve the issue... IF yes please tell me which one to flash ...as I am already on Cyanogen Mod 2.3.7... Please help...
Click to expand...
Click to collapse
did flash the stock froyo sbf ..... now will root again .. n install cm.... cheers
!!
My problem is similar:
I have installed CyanogenMod 7 V7.1.0 (9 Oct 2011), and it works fine about two days until today :-(
After installing 2nd init with bootmenu from market, my phone stucks on boot logo, so I decided to remove 2nd init from 2nd init menu.
I am only able to access the stock recovery!
Now, my phone still stucks on boot logo, I tried to restart phone, but no success.
Also, I tried to flash with RSD Lite, but my PC does not recognizes my phone.
Can anybody help me with this?
Is it possible to flash phone via system recovery by update.zip ?
--> Problem solved by entering into Bootloader Mode and flashing with RSD Lite tool.
Thanks!
Actually CM7 already have the 2nd-init running and busybox too.
install motorola drivers and RSD lite
get the full SBF
enter boot loader mode by pressing volume up and power
flash SBF
this should fix everything. you can then try installing CM7 again
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....
Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie
stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,
Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.
Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please
Hi all,
I've tried to install costum ROM ( unofficial CM 11 http://forum.xda-developers.com/showthread.php?t=2783617 ) with recovery PhilZ Touch 6.44.9. I did all the steps and it worked perfectly. But it has some bugs with the screen lock (when charging the screen becomes black but still lightened, also with wifi bug). I tried to reboot into recovery from the ROM (into the power menu, pressing restart -> reboot into recovery) and then the tablet won't restart. just the download mode works, else the tablet shut down just after writing "GALAXY TAB 3 " into the screen. So i've re installed the recovery PhilZ touch 6, which works and i've tried to restore the backup i've done before the "crash", but after that the tablet boot into recovery. I've tried intalling a new rom also the result (the Tablet boot into recovery).
Help please
Has your Recovery The KK extension?
Which was your OS Version before you install CM, KK4.4.x Stock?
FLASH UR TAB AN OFFICIAL FIRMWARE AND RE ROOT IT. YOU CAN GET UR FIRMWARE FROM SAM MOBILES SITE.
FLASH USING ODIN.
CHEERS!
Sent from my GT-I9500 using XDA Free mobile app
I have rooted my Samsung Tab 3 SM T-110 running kitkat 4.4.2 an year back and flashed CWM but i forgot about it so what i did was flashed CWM again but it didn't flashed properly i guess and i didn't remember that i installed CWM instead of TWRP so after downloading CWM ROM Manager i rather selected TWRP... Then i booted into recovery mode through the ROM Manager app and now i am not able to go back to system.... I have tried factory reset and formatting dalvik cache but nothing seems to work, the phone gets back to the recovery screen... Please Help.
Thank You
install latest recovery for your device and flash it using odin.
Should fix your issue and boot your device to touchwiz
On the SM-T110/111 is only allowed to Boot Ingo Recovery with the Button Combi, if you try an automaticly Reboot by APP you have an Bootloop to the Recovery