Related
My phones screen just stopped working and T mobile agreed to replace it but now i have to unroot it. I Rooted with Visionary and have S off, i found the guides to unroot but I cant see my screen for half the stuff i need.
Is there anything i can do?
Please help me.
Thanks in advace.
...deng that's not good. Since you can't see then I don't know. Maybe with sombody with adb knows as for me I don't know... you should not accept the replacement because if they find out ur rooted you will pay 300+ bucks
Sent from my HTC Vision using XDA App
Ahhhh. Can someone please help me out? I remember when one of my older phones broke i found some program to pull up the screen on my comp. Is that possible with the G2?
That's adb. If you have adb you should be able to find the phone if you hold volume down + power. But from what I know you need usb debugging on
Sent from my HTC Vision using XDA App
ADB is for like giving the phone commands. Im talking about a program that will bring up the phones actual screen on the computer and you can see everything.
Anybody else know what i could do?
Putting myself in this situation...I would pull the SD card, get it on the PC or whatever and copy PCIMG10.ZIP (or whatever it is - the stock OTA) to the root of the SD - put it back in the phone and start up in recovery (vol down + power). Then wait about 5 minutes (shouldn't be that long tho) until the phone has a chance to parse the PCIMG recovery file. After that I think the response is Volume Up to confirm the update?
The fact you rooted with visionary may be a deal breaker however with my Blind_Ota_revert_method(tm)
I guess, if at that point that bricked your phone, at least it will appear to any techs that you had/have OTA firmware on it...not sure though
DankDomo said:
ADB is for like giving the phone commands. Im talking about a program that will bring up the phones actual screen on the computer and you can see everything.
Anybody else know what i could do?
Click to expand...
Click to collapse
Yeah I think I know what you are talking about, my old Vibrant had a TV Out feature to display the screen on any tv you hook it up to. Unfortunately, the G2 does not have this functionality out of the box or available in any custom capacity. It may be possible to manipulate the USB driver on the phone to achieve this, but I have not heard of a way, you'd need to talk with a dev to find out for sure.
As far as getting past this issue, your best bet is going to probably be to try to hard brick, but without a screen to work with that will be damn near impossible. I hope you're able to do it man, I would not want to be in your sitch. Good Luck.
The screenshots your asking about is DDMS, it's in the sdk/adb folder.
I've always worried about this too, I was thinking do what he said with the stock stuff but do the fastboot reboot bootloader command and try running it there. I gotta do a vibrant warrently here soon so I gotta do the same thing.
So you can't do that with visionary? I hope so... cause that's how I did it lol.
Sent from my HTC Vision using XDA App
Hi, I think my phone just broke.
It's a HTC Desire Z.
Today I tried flshing a new radio image, but it didn't work , got the write failed message, from within phone os (virtuous froyo 1.0.2)
Got hboot 0.85.xxxx.
This was at work and since I had no compatible USB cable I thought I'd wait until I got home.
Well at home i selected boot to bootloader from holding the power button, the phone shutdown and that's it.
Now only lifesigns are the orange charge led.
When pulling the battery and inserting it, connectiong the usb cable the light comes on, pulling the cable it turns of.
When cable connected and pressing vol down + power, nothing happens, pulling the cable leaves the charge light still on.
Trying vol down + power without the cable does aboslutely nothing.
Do, does anyone have any clue what I can do ?
The phone worked flawlessly until the reboot point.
Iknow the first desire had some special key combination to get into some blue-led mode, haven't found anything on this so far.
it does not show up in devices in computer management either.
HELP!!!!!!!!!!!
P.S. I found the vol up + power it shows up as Qualomm CDMA Technologies MSM in device management.
hawkn said:
Hi, I think my phone just broke.
It's a HTC Desire Z.
Today I tried flshing a new radio image, but it didn't work , got the write failed message, from within phone os (virtuous froyo 1.0.2)
Got hboot 0.85.xxxx.
This was at work and since I had no compatible USB cable I thought I'd wait until I got home.
Well at home i selected boot to bootloader from holding the power button, the phone shutdown and that's it.
Now only lifesigns are the orange charge led.
When pulling the battery and inserting it, connectiong the usb cable the light comes on, pulling the cable it turns of.
When cable connected and pressing vol down + power, nothing happens, pulling the cable leaves the charge light still on.
Trying vol down + power without the cable does aboslutely nothing.
Do, does anyone have any clue what I can do ?
The phone worked flawlessly until the reboot point.
Iknow the first desire had some special key combination to get into some blue-led mode, haven't found anything on this so far.
it does not show up in devices in computer management either.
HELP!!!!!!!!!!!
P.S. I found the vol up + power it shows up as Qualomm CDMA Technologies MSM in device management.
Click to expand...
Click to collapse
I had this same thing happen to me when I first got my G2, same problems, only charge light would come on, but it happened to me when I was dd the ENG.Hboot. everything worked fine untill reboot, then the same issues as you.
I had to buy a new phone...
Sent from my HTC Vision using XDA Premium App
joemm said:
I had this same thing happen to me when I first got my G2, same problems, only charge light would come on, but it happened to me when I was dd the ENG.Hboot. everything worked fine untill reboot, then the same issues as you.
I had to buy a new phone...
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
There must be a way to recover this type of brick, to dd a new hboot image.
Lets face it, the hboot image was flashed to a brand new HW at some point, the Q will therefor be, how do they do it, and how can we all do it?
Research continues.....
Ok, does anyone know how to fix a broken bootloader on the Desire Z ?
I figured out that the bootloader is broken, this because I mixed up radio and hboot image yesterday and tried to write the radio image to hboot partition, this is why I got a message telling me write error because of space issues.
Now I have my old Desire Bravo, wich is working better than all desire bravos here at work
But I want my Z back in bizniz.
joemm said:
I had this same thing happen to me when I first got my G2, same problems, only charge light would come on, but it happened to me when I was dd the ENG.Hboot. everything worked fine untill reboot, then the same issues as you.
I had to buy a new phone...
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Scary stuff. T-Mobile didnt replace it for you?
Sent from my HTC Vision using XDA Premium App
have you got insurance??
u could drop it down the stairs at your workplace... claim on insurance... make sure its truely broke though...
just a stupid thought
if warrenty wont replace then insurance most probabally will... if its so broken you cant even turn it on to get the led. lol
either way mate i really hope you get it sorted soon best of luck!
You have brick your phone. bootloader is broken no fix for it. Sorry.
If you do not have warranty call htc Norway and say that you try to update your Software WITH HTC SYNC. They are very customer friendly there.
stian230 said:
You have brick your phone. bootloader is broken no fix for it. Sorry.
If you do not have warranty call htc Norway and say that you try to update your Software WITH HTC SYNC. They are very customer friendly there.
Click to expand...
Click to collapse
I've been talking to mcare and deltaservice, they seems to be unable to help me since the bootloader is broken, I know this issue can be worked out with JTAG on the old desire, just have to wait for JTAG update on the Z, then I'll be up and running again, btw, I'm getting a new phone AND got to keep the old one
Ohhh, yeah.
BOYAAAAHHH!
I still wonder what the volume up + power key combo is good for.
When the phone is started in this mode, it shows, as mentioned earlier, as a Qualcomm CDMA Technologies MSM device in device manager on my puter, diagnostics mode ? possible way to get write access to internal memory, like say.... /dev/block/mmcblk0p18 so we can repair the bootloader without any advanced tear down of the phone and fancy equipment ?
If ANYONE have a clue on this feel free to share it with everyone else that has a Desire z/Vision. Thank you.
btw, took some high res pics here:
http://www.dropbox.com/gallery/10646701/1/htc desire z?h=374e6d
I tried to flash the aokp m5 rom but didn't flash the el26 cwm file. Now when i try to boot the phone, it doesn't start. the blue light just lights up and stays light untill i pull the battery. I also tried to get into recovery and it just does the same thing. I downloaded odin, but im not sure what im supposed to do with it. if anyone knows how to help, i would be extremely grateful. Thank you
Pull battery, put back in, hold volume down to get in download mode, start Odin on pc , plug in phone, press volume up, Odin should respond with COM# click the phone button and select your stock from such as the cwm el26. Just read the forums. Don't feel bad it happens to all of us once in awhile. Thankfully I have managed to fix most of my screw ups. Next time just read everything and save yourself hours......experience
But then again that could make it worse. So for ya sake use the search button
My phone doesn't allow me to get into download mode mode... Does that mean it is bricked?
Well I have more than once brought my device that I though would never come back. I know I have got ton my phone and my friends att infuse to connect to Odin without actually getting a screen on the phone and was able to get a recovery to restore the phone back to normal. From my experience though its been hard to brick these things... I sometimes wonder if people bricking is just user error.... knock on wood....
OmarEvo said:
My phone doesn't allow me to get into download mode mode... Does that mean it is bricked?
Click to expand...
Click to collapse
I don't know what that other guy was saying but you have to hold the volume down Button and the power button until it shows the custom OS menu the press volume up and then download sfhubs one-click EL29 and then open it, its in development fyi, connect your cable to your PC and your phone and the program will have a yellow box light up that will say COM#, don't worry about the number next to COM, then press start and wait until it reboots. Do not unplug the phone or close the program. If it works for you please respond back here so others can hear the results.
Sent from my SPH-D710 using xda premium
Is your phone recognized by adb? Maybe try "adb reboot download"?
Also if you read up about a jigg for the epic touch, in case this doesn't work, them that could also fix it. You might need to spend something though but I can't clarify this because i've never bricked before.
Sent from my SPH-D710 using xda premium
Nabbu said:
I don't know what that other guy was saying but you have to hold the volume down Button and the power button until it shows the custom OS menu the press volume up and then download sfhubs one-click EL29 and then open it, its in development fyi, connect your cable to your PC and your phone and the program will have a yellow box light up that will say COM#, don't worry about the number next to COM, then press start and wait until it reboots. Do not unplug the phone or close the program. If it works for you please respond back here so others can hear the results.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yea he's explained it better than be. I'll just be posting from my laptop here on out. On screen keyboards kill me. I miss my g1s QWERTY. Ah well.
I press volume down and power but the custom os screen doesn't show up, all the phone does flash the blue notification light and the screen looks as if it is off.
This isnt something that a jig can help and for everyone else trying to help he cant access download mode or recovery.
You're most likely hard bricked and the only thing you could try is to leave the battery out overnight then try to turn the phone on again. If you still have black screen with just the notification LED on then the last resort would be a jtag service which isnt guaranteed to work either.
This is a known issue from wiping any partitions on an ics kernel.
What would a jtag service be?
You're going to need a USB jig to get your computer to recognize your phone to download the firmware over the current one. Wait till tomorrow if someone doesn't respond because i'm assuming all the devs and admins are knocked out and they are the ones who can help.
Sent from my SPH-D710 using xda premium
Geez a lot got posted while I was typing.
Seeing as how you can't get into download mode or recovery I'm afraid you're out of luck. (unless the jigg thing works, which I don't think will at this point)
This is a hard lesson to learn but exactly why you don't take any shortcuts when flashing custom ROMs.
What is a jtag service, and how would I go about it if I tried to get it done?
Thanks for helping them out! Its late and I forgot about the overnight battery pull and jtag.
Sent from my SPH-D710 using xda premium
OmarEvo said:
What is a jtag service, and how would I go about it if I tried to get it done?
Click to expand...
Click to collapse
Do a search in this forum, since there's been a lot of bricking I'm sure you'll find a ton of threads concerning this.
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
Thats one of the companies offering jtag services. I believe some people have used it before but im not sure of their results.
Yeah, I'm only sixteen, so I'm trying to grasp all these different things. I'm used to htc because i had an evo, then i got an evo 3d. I use the e4gt as a second phone, but all the things for a rooted samsung are completely different compared to an htc. Thank you for all your help guys. I have learned my lesson now
Good luck. I hope the overnight battery pull helps or that the jtag folks can get you up and running.
For the overnight battery pull, when I try to boot it, should I try to put it into download mode? Or just plain boot? Thanks again
Hi guys. Have a problem with my phone. Seems like I screwed it up. I was running sacs custom rom and I downloaded the TWRP (maybe a wrong version), the thing is that I downloaded it and flashed through Clockwork recovery and after that the phone went black and now doesn't turn on. Not even with home+vol up+power and not even with vol down+home+power. Nothing. Removed battery for 30 seconds and nothing.
any advice? I know I was a dumb. I'm paying insurance for it so I guess I could turn it in. But if there's something I can do, please let me know.
Thanks!
You might be hard bricked and have to take it into repair or replacement
Sent from my GT-I9300 using xda app-developers app
Where did u get the twrp u flashed? gotta link?
Double check you didn't flash something for the I9300 or another version. If it won't give you any sort of life (Try getting to download (Odin) mode) Then more then likely it's bricked..
Same problem here. No joy so far. The PC detects something (USB connected device) when I plug it in, but nothing that Odin is picking up.
ok. I downloaded TWRP 2.3 BL or something. Downloaded through GooManager doing a search,. Then rebooted the phone on recovery mode and installed it from CW. After it was flashed, the phone went black and never turned back on. If I connect usb cable to a PC I get the sound on the PC when you put any USB device but phone doesn't turn on. Tried removing the battery for a few hours and back in but nothing. tried conecting usb without the battery and it turns on the red light as if it's charging. then goes off. tried with vol up (and down), home and power but nothing.
I guess I got a hard bricked phone and I'm screwed for being stupid and install something I wasn't sure. It wasn't a ROM, so I thought it would not harm the device. Was wrong.
^ you say it all.
But when you got a replacement. Just press menu key in Goo Manager and select "install open recovery"
Sent from my O=O
yeap. asked sprint about repair it, since I have the insurance but they told me I had to pay a deductible. So I just called insurance I reported lost. Rather pay the same deductible amount and have it for spare parts than give it to them, plus the deductible. hehe. maybe someday I find way to make it work or just use it a spare parts.
thanks you guys for all the advices given. Still, if there's something else I could try, let me know.
Just hope no one else do that.
Once again... Thanks!
Since you found it via searching it could have been for any phone, probably not yours. a link would have helped here to confirm. The best way to confirm it's a paperweight is to plug in PC n see what windows calls it. If it shows up as QHSUSB_DLOAD then it's fukd.
billard412 said:
Since you found it via searching it could have been for any phone, probably not yours. a link would have helped here to confirm. The best way to confirm it's a paperweight is to plug in PC n see what windows calls it. If it shows up as QHSUSB_DLOAD then it's fukd.
Click to expand...
Click to collapse
yes. for sure was for any other phone that mine. so, should I put a bootloader on the micro sd and try lo connect it through odin to see if it detects it? where it's supposed to show that QHSUSB_DLOAD ?
Anyone know if OMAPFlash works for the GSIII? I'd suggest trying that. Google it.
Sent from my SPH-L710 using xda premium
I saw on ebay selling a Jig for the galaxy s3 but it says for: S3 /SIII I-9300 / I-747 Samsung Galaxy.
Does anyone knows if that device may work also for the Sprint S3? also if it may work for this kind of brick?
Bought this phone off the electronic bay, arrived totally fine, no signs of any damage, worked just fine. Upgraded it with the sony OTA updates to 4.1 and then the screen started acting a little funny. Sometimes when hitting the unlock button it would just light up the backlight. Then a few days later it stopped ever doing anything besides lighting up the backlight. Then it progressed to doing what I show in the video.
It still plays alert tones when i get messages or calls, but obviously the phone is totally unusable, but charges up fine.
any ideas what is going on here? Called Sony for a repair, but I was unaware they just charge a flat $185 irregardless of what the problem is...ridiculous.
foofiebeast said:
Bought this phone off the electronic bay, arrived totally fine, no signs of any damage, worked just fine. Upgraded it with the sony OTA updates to 4.1 and then the screen started acting a little funny. Sometimes when hitting the unlock button it would just light up the backlight. Then a few days later it stopped ever doing anything besides lighting up the backlight. Then it progressed to doing what I show in the video.
It still plays alert tones when i get messages or calls, but obviously the phone is totally unusable, but charges up fine.
any ideas what is going on here? Called Sony for a repair, but I was unaware they just charge a flat $185 irregardless of what the problem is...ridiculous.
Click to expand...
Click to collapse
Hi,
The best way to rule out any software problems would be to flash the latest 6.2.B.1.96 ftf using Flashtool. So, first make sure that the phone has enough charge, then press and hold the volume up+power combination until you get three vibrations. Then press and hold the volume down key and simultaneously connect the USB cable when Flashtool prompts you to. Once the flashing is complete, disconnect your phone and turn it on normally.
Regards,
abcdjdj
Sent from my LT26i using xda app-developers app
I already flashed back to stock just using the sony bridge app. It seemed to work fine (nothing showed up on the screen the entire time). After the phone boots up I can hear notification sounds as it gets all my texts and voicemails/whatever else. But otherwise it still does what is shown in the video below:
here is the video again, not sure if it worked last time:
http://www.youtube.com/watch?v=jbrpsWburMw
foofiebeast said:
I already flashed back to stock just using the sony bridge app. It seemed to work fine (nothing showed up on the screen the entire time). After the phone boots up I can hear notification sounds as it gets all my texts and voicemails/whatever else. But otherwise it still does what is shown in the video below:
here is the video again, not sure if it worked last time:
http://www.youtube.com/watch?v=jbrpsWburMw
Click to expand...
Click to collapse
What bug u reported is the bug of .200 and .211 official bug.. Its fixed in .96fw.. Wipe everything when u flash .96fw... So there won't be any problems..
sudhindrakv said:
What bug u reported is the bug of .200 and .211 official bug.. Its fixed in .96fw.. Wipe everything when u flash .96fw... So there won't be any problems..
Click to expand...
Click to collapse
Well there is a slight problem.
The phone does not have an unlocked bootloader yet, so I can't use flashtool. It has been flashed back to stock using the method I mentioned above. I have just finished installing ADB because (bear with me please) there is no way to turn the phone into fastboot mode without turning it off (I cannot currently turn it off because I can't see what is happening on the screen and don't remember how this phone works when you hold down the lock key to turn it off). I can perform a hard reset, but no way to just get it to turn off entirely.
So I thought I could use adb to shut it down, but adb won't work unless I have debugging enabled, which again I can't do unless I could basically just blindly navigate the menu to those buttons.
Although if I wait until the phone is fully dead then I can hopefully get it into fastboot mode, but that only gives me one chance. Plus it has a full charge right now, so that's going to be awhile.
Any suggestions?
I can get it in to fast boot if I'm quick, but I still can't enable debugging beforehand so its semi worthless.
I've been trying to watch videos to see where the button placement is to navigate through the menu to blindly enable debugging, but I can't seem to figure it out. It also doesn't help that I have no idea what version of android is now on the phone. I used the mac sony bridge app to restore the phone, but i'm not sure if that set it back to stock stock, or what version of android it set it to.
I am also now even more confused because I connected the phone to the computer and when I browsed it, all the pictures I took were still there...which should have been wiped when I restored it with sony bridge...
figured out it was 4.1 and watched review videos until i found one that showed the menu layout (although now I realize google images would have been more helpful).
Now going to see if I can get the bootloader unlocked.
I still feel like flashing 6.2.B.1.96 isn't going to do anything, because I assume that is what the sony bridge app flashed to it. Also I don't see where you are talking about that the issue I am having was a known issue, if you could point me in that direction that would be very helpful.
EDIT: Actually I'm not sure I enabled debugging after all, as when I do adb devices, no device is listed as running, just a blank space. Though I'm still not convinced doing the above would do anything, as it is basically what I have already done, just with flash tool as opposed to the official sony route.
Anyone have any ideas? I got a torx 6 and opened the phone, checked the connection between the motherboard and phone and it is fine. Screen is still having same issue.
I would be happy to just buy a replacement part for it, but i have no idea what part is messing up. Is it the display (the touch works fine) or is it the motherboard (it seems weird that it would be this because the phone functions completely normally, I even accidentally answered a call yesterday).
If i was to try and replace the LCD (or whatever it is) would I have to replace the digitizer as well? At which point it would make more sense to just sell the phone for parts I suppose.
You can use the flash tool by bin4ry with a locked bootloader. Not sure if you're past that stage though.
Sent from my LT26i using xda app-developers app
dkconor said:
You can use the flash tool by bin4ry with a locked bootloader. Not sure if you're past that stage though.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I'll go ahead and try that out, but is there really much of a point do you think? Considering I've technically flashed the phone back to stock using the official software, why would it be any different doing it this way?
I am asking honestly btw, not trying to sound rude. I'm thinking it is more of a hardware failure, i just have no idea what part exactly is failing.
The phone itself works totally 100% fine, the touch works totally 100% fine, the only thing that is not happening is the data getting to the screen and displaying. The screen just flashes white for a second and then fades out (as you can see in the youtube link). Or it flashes a solid block of white at the top in the middle and faded white the rest of the way down and then it slowly all fades out (or disappears immedaitely if i press the lock button. The buttons all work fine (physical and touch) and i can navigate around the phone, albeit totally blindly.
This is really frustrating, and I'm pretty disappointed to see how sony had no interest at all in helping me resolve this situation.
Flashtool works with lock and unlocked bootloader
XDAプレミアムを使用 して私のLT28hから送ら れてきた
UchihaDareNial said:
Flashtool works with lock and unlocked bootloader
XDAプレミアムを使用 して私のLT28hから送ら れてきた
Click to expand...
Click to collapse
....right i know, but why does that matter. Why would reflashing my phone help at all at this point. Did you even read my post?
Listen to us
Alright so you came to this thread for...help
We have told you numerous times to flash using this tool (dev host link):
http://d-h.st/Kb8
install the flashtool created by Binary (sorry for username spelling error)
Download the ftf
https://docs.google.com/file/d/0B18FXPCopQhkeXNoWGVWbzlRaG8/edit?pli=1
now USING FLASHTOOL (link 1)
FLASH the FTF (link 2)
A clean flash. This flash is different from the flash that Sony will provide you for obvious reasons.
Using this method will COMPLETELY remove any doubt whether the issue is regarding software or hardware. Then you dont have to "think" whether the issue is hardware related or software related.
Sorry if i sounded rude but i had a hard time comprehending why you would not use the advice given by i believe 2 different indiviuals on a questions and answers thread.
424aca said:
Alright so you came to this thread for...help
We have told you numerous times to flash using this tool (dev host link):
http://d-h.st/Kb8
install the flashtool created by Binary (sorry for username spelling error)
Download the ftf
https://docs.google.com/file/d/0B18FXPCopQhkeXNoWGVWbzlRaG8/edit?pli=1
now USING FLASHTOOL (link 1)
FLASH the FTF (link 2)
A clean flash. This flash is different from the flash that Sony will provide you for obvious reasons.
Using this method will COMPLETELY remove any doubt whether the issue is regarding software or hardware. Then you dont have to "think" whether the issue is hardware related or software related.
Sorry if i sounded rude but i had a hard time comprehending why you would not use the advice given by i believe 2 different indiviuals on a questions and answers thread.
Click to expand...
Click to collapse
Hi,
because I could not follow the advice from the first user because the bootloader is locked. The second person gave me the advice, but honestly it seemed like pretty pointless advice. I don't understand how it is "obviously different" if it is literally flashing the same firmware (at least the first advice was that). I don't think it's that strange to ask why it would be any different.
To me it sounds like I had a broken window in my house and I asked someone how to fix it. I bought the replacement glass from store A and it didn't fit. I asked for help and someone pointed me to the exact same item at store B and said that surely it would work. Do you understand why this could be confusing? I feel like about half the time people give help on XDA it is very general and people are just looking for "thanks"...
I'll definitely try this though if you think there's a chance that it might work out differently. I'll try and get it set up tonight, thanks for the encouragement, I understand I probably sound stupid, just trying to figure out what to do.
Also, I assume this flash tool won't work if USB debugging isn't enabled. As I've said in previous posts, I can click things just fine, but because I can't see what I am doing, I don't have way of knowing where to click on the menu.
Does anyone have their phone set up with this version of android still. If you could take screen shots of each click to make to get to the dubugging box (and if there is a confirmation box) i would greatly appreciate it. I only had the phone for a week before this randomly happened, so I hadn't thought to enable debugging yet, as I hadn't even thought about custom firmware yet.
EDIT: Or even just a picture of what the screen that comes up when you long press to shut the phone down. I have no way of turning off this phone right now without just waiting for it to run out of battery.
Holding down the power button for a long time does nothing, holding vol up and power restarts it, but I need a way to turn it off. If i hold the power button for like a second so instead of locking it, the menu comes up, I just can't seem to find the freakin button for power off.
(please remember I can see nothing on the screen, it is just blank).
flashtool does not need debugging when you doing the actual flashing
to turn off the phone
SIMULTANEOUSLY hold down
Power+ Vol up + Vol Down (AT THE SAME TIME)
wait for about maybe less than 25 seconds and you will experience THREE short consecutive vibrations
at this time...the phone is off
then you can begin the flashtool method