Develop Bugs

iPad or iPad2 Neoprene pouches? Do they fit?

Anyone know? Wanna grab one from Best Buy today but want to know if it works

Cant imagine they would since the GT is longer and narrower...

Gonna second this to increase my post count... A nice messenger bag would work tho

Most that I have tried do not. They leave a small gap where the top of the hole to the pouch would normally touch the bottom.
The 10.1 is just a little bit too long. I'm currently using a 10" netbook sleeve until I decide what I want to do...

Wont fit.
Sent from my SCH-I510 using XDA Premium App

10" netbook items work...but none are a snug fit. Ipad is no go because of dimensions.

xManMythLegend said:
10" netbook items work...but none are a snug fit. Ipad is no go because of dimensions.
Click to expand...
Click to collapse
It fits... but 1 car fits into an airplane hanger, doesn't make it right tho, haha

damn, I got the keyboard dock so I dont need a case that is also a stand, I just want a pouch to put it in when its in my bookbag etc to protect the screen. Any suggestions?

DroidHam said:
damn, I got the keyboard dock so I dont need a case that is also a stand, I just want a pouch to put it in when its in my bookbag etc to protect the screen. Any suggestions?
Click to expand...
Click to collapse
There are a few on ebay:
http://stores.ebay.com/The-Fair-Pri...286603010&_sid=62662480&_trksid=p4634.c0.m322
But other than being patient until more products are released, there's not much you can do. Remember, the iPad has been out for over a year, the iPad2 for months and this thing 5 days. Be patient.
I picked up a $10 neoprene netbook bag from the discard bin at a computer shop to use for now. Ideal, no. Functional and temporary, yes. For the first two days I used a bubble envelope - no joke. It was my "theft deterrent bag"...

bella92108 said:
It fits... but 1 car fits into an airplane hanger, doesn't make it right tho, haha
Click to expand...
Click to collapse
I think you were looking for the 'hotdog down a hallway' analagy...
Anyways... ipad2 != Tab 10.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I swear, that dude is saying "U mad, bro?"

I'm using this one. It's snug, but fits well. Plus it has a pouch in the front for my Mifi and cable.
Belkin Vue Sleeve

The neoprene roocase for the ipad2 is a very tight fit but should give good protection.

This fits, but is a little snug in the width. Got it on closeout for $10 at Staples.

Moto folio case mod?

So I'm thinking about doing a mod to the moto folio case and make the front cover detachable and reatachable. The material doesn't feel like it will unravel do I believe if I use a razor blade to cut it off and figure out a way to attach the other side of the lid. Hoping maybe this will make it a little better for the dock however I will probably lose the stand capability. Anyways I got the case for 20 and could probably get it again for that price. Any opinions? Has anyone tried this? Please let me know your thoughts.
Sent from my Xoom using XDA Premium App

smith3jk said:
So I'm thinking about doing a mod to the moto folio case and make the front cover detachable and reatachable. The material doesn't feel like it will unravel do I believe if I use a razor blade to cut it off and figure out a way to attach the other side of the lid. Hoping maybe this will make it a little better for the dock however I will probably lose the stand capability. Anyways I got the case for 20 and could probably get it again for that price. Any opinions? Has anyone tried this? Please let me know your thoughts.
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
Why bother? Fold it underneath when on your lap and u dont notice it. The only time mine annoys me is when i have to charge it

I don't know if it can unravel when cut, but that was a concern of mine as well. I added a 3/8-inch diameter hole over the charging port so that I can charge it with the cover closed. It works great. To prevent unraveling or fraying, I melted the hole (using an old nut driver heated over the stove).
I don't understand the desire to cut the flap off, but I won't question your goal. If you do cut it, you can heat seal the edge with a flame or hot blade.

I just feel like the flap gets in the way but now that I think about it I will probably need the stand capability for school. I may just cut the hole like you said.
Sent from my Xoom using XDA Premium App

So I did it. I really got tired of holding the case open. Now it fits in the dock better as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

good job... what do you use the dock for connecting to your tv/computer?

joshndroid said:
good job... what do you use the dock for connecting to your tv/computer?
Click to expand...
Click to collapse
Just charging, that's all you can do really other than plug in some speakers. Kind of bugs me it doesn't have a USB out of the dock. Oh well I only paid $25 for it.

Just put a USB (Motorola Camera Cable) inside my dock tonight. SWEET!
Took some doing, and had top pitch the top weight inside, but it looks pretty clean.

hybrid silicone series

has anybody bought 1 of these cases,
http://www.ebay.co.uk/itm/NEW-STYLI...uches&var=&hash=item43b164c2b3#ht_6034wt_1397
i really like the look of the red 1 but it looks like i would struggle to plug the charger in

http://www.amazon.com/gp/product/B008JGLU4W
For the us folks.

I have this case. I use it out of all the cases ive bought. The charger port is too small for the cable came with the phone. But you can stretch the silicone then put it in and it fits. The case is great quality so it will not break easily. Though I bought a new cable that fits better, but it raises the the silicone a little. Its not bad at all though. The buttons feedback is great, i can press them easily. This case is good looking, i just love it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-T999

Xcor3 said:
I have this case. I use it out of all the cases ive bought. The charger port is too small for the cable came with the phone. But you can stretch the silicone then put it in and it fits. The case is great quality so it will not break easily. Though I bought a new cable that fits better, but it raises the the silicone a little. Its not bad at all though. The buttons feedback is great, i can press them easily. This case is good looking, i just love it.
Sent from my SGH-T999
Click to expand...
Click to collapse
if it wasn't for the small charging port...then I would jump the gun and get one myself...
Sent from my SGH-T999 using xda app-developers app

Any on amazon?
-Sent from my T999 / T-Mobile Galaxy SIII

mikesdot said:
if it wasn't for the small charging port...then I would jump the gun and get one myself...
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
This case is much like the Incipio Silicrilic that I have bt I dont have issues with the charging port...
http://www.incipio.com/Samsung-Gala...ualPro-Hard-Shell-Case-with-Silicone-Core.asp
Charging your Samsung Galaxy S III just got easier. Utilize the DualPro™ case and enjoy the intelligently placed cutout near the charging port on your smartphone.
Click to expand...
Click to collapse

cgulliver said:
This case is much like the Incipio Silicrilic that I have bt I dont have issues with the charging port...
http://www.incipio.com/Samsung-Gala...ualPro-Hard-Shell-Case-with-Silicone-Core.asp
Click to expand...
Click to collapse
i like the look of that 1. im gonna have to look for a uk seller for that.
i bought the hybrid case and have found a couple of things i dont like about it.
1. the charger doesnt fit through the case, i have to pull the bottom lip of the case down.
2. the build quality is really bad, and i can see roughly cut edges all the way round the screen

Desk stand for S3 with case?

Has anyone been able to find a nice stand that they use while charging the phone in portrait mode? I currently am using the UAG case, so the normal docks won't work. Thx in advance.
Sent from my big red Samsung Galaxy S3 using XDA Premium.

I am using the basic black dock labeled "EZO" with the two piece Incipio Silicrylic case. Fits fine. Dock came with a plastic sizing adapter.
http://www.amazon.com/gp/aw/d/B008G1FFBO/
http://m.androidcentral.com/incipio-silicrylic-case-galaxy-s3-review
Sent from my SPH-L710 using xda app-developers app

I have the Kidigi and it works with my Incipio DualPro Silicrylic case. Not sure about the UAG though.

Icrado neo.
Sent from my GT-I9300 using xda app-developers app

Thanks for the replies. I think I am going to have to become less frugal and convince myself to spend more than I had originally hoped. Nice stands!

these work
I have this one and it works well http://www.ebay.com/sch/m.html?_nkw=dock&_sacat=0&_odkw=&_ipg=25&_osacat=0&_armrs=1&_ssn=supermom28
Also my wife has this one and my s3 also fits in it with a slim case that snaps on, but it has some room and would fit a tpu case as well http://www.ebay.com/itm/SAMSUNG-GAL...734459?pt=PDA_Accessories&hash=item19cbf0bdbb

yeah i use a dock as well

I wonder if it will fit my Incipio Faxion.

I found a nice little stand with a sticky front at the container store that works perfectly. And ya, cases force you to rethink stand choices.
Sent from my big red Samsung Galaxy S3 using XDA Premium.

I've been using this Thought Out ped3 universal steel stand ($22) for a couple months and I still love it. I had to return the first one I bought, though, because it was warped and wouldn't sit level.
EDIT: Wait, you looking for a DOCK or a STAND, because there's a difference. Your thread title says "stand"...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

A stand. I don't think there's a dock that will accommodate my UAG case. Thx for the tip. Looks nice.
Sent from my big red Samsung Galaxy S3 using XDA Premium.

I ordered 2 of these under a different brand name and got 2 for the price of this one. Nice and portable.
http://www.amazon.com/EMPIRE-Folding-Plastic-Smartphone-Packaging/dp/B006W0ZX1S/ref=sr_1_7?ie=UTF8&qid=1349793895&sr=8-7&keywords=cell+phone+stand

pappcam said:
I ordered 2 of these under a different brand name and got 2 for the price of this one. Nice and portable.
Click to expand...
Click to collapse
I bought this too. For 4 bucks I think it solves my lack of desk stand quite well.

The original Samsung dock takes a phone in a case. The bottom part around the microUSB plug is spring loaded, pretty clever.

I bent a gift card to use as a stand when I go to sleep since the phone is in landscape (it won't support portrait) and I have a mesh business card holder at Office Depot on my main desk at home for portrait/landscape.

[UPDATED] A slightly different slim metal bumper case, working magnetic cradle port.

Hi guys, I have just bought a slim metal bumper for my Z1. Here is the link if you want it too ==> http://www.ebay.co.uk/itm/Luxury-De...lePhonesCasesPouches&var=&hash=item2c76d1781e
----------------------------------------​It is different from both this one http://forum.xda-developers.com/showthread.php?t=2609711&page=2 and this one http://forum.xda-developers.com/showthread.php?t=2527493 , since the first one is a LOVE ME! model (personally don't like it, sorry) and the second one I don't know, it looks pretty cool but the owner said that the magnetic charger needs to be cut in order to make the phone charge properly.
----------------------------------------​
Actually mine is better, with this one you have still at least 1mm of gap between a flat surface and the front/back of your phone, there are some little silicon felt to grip the phone inside the bumper and protect it from self-scratch.
Last for the best : all ports are made for our phones functions BUT! My magnetic cable is working without any modifications or cuts, I just have to plug and there it goes!
I don't know if my cable is different from the Sony one or if it is a stock Sony one actually (it was branded Sony DK31 magnetic cable so who knows).
I can recommand it without reserve, the seller is trustworthy and shipped it really fast, 5 days from UK to France. The bumper itself is very light but still feels sturdy. Vastly positive impression.
Pictures are here !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here you can see the phone being charged.
I think you guys might like it too. Please let people know if you buy it and your experience with it.

This case looks good but will make volume button harder to press especially camera button.

Hav exactly this one...bought on aliexpress...its pretty good and all, sturdy and with rubber on the internal side to protect the phone from shocks, but i hav to say, makes the phone a little bit too big for my taste, when i take it out the case i remember how beautiful this phone is...and its too big to fit in my magnetic dock

I have the same metal case in black:
http://forum.xda-developers.com/showpost.php?p=49704636&postcount=412

ngvuanh said:
This case looks good but will make volume button harder to press especially camera button.
Click to expand...
Click to collapse
This is true for the volume button, when you want to find them on the go it is harder to press, but the camera button is not this hard to press, I was surprised.
LeoSquizz said:
Hav exactly this one...bought on aliexpress...its pretty good and all, sturdy and with rubber on the internal side to protect the phone from shocks, but i hav to say, makes the phone a little bit too big for my taste, when i take it out the case i remember how beautiful this phone is...and its too big to fit in my magnetic dock
Click to expand...
Click to collapse
You're right! Our phones are so beautiful when naked. But I don't trust the skinomi protection, it cannot withstand falls I think so it might be the "best compromise" for us.
DripleX said:
I have the same metal case in black:
http://forum.xda-developers.com/showpost.php?p=49704636&postcount=412
Click to expand...
Click to collapse
Thank you for your review, now those are detailled pictures! I didn't even think of shooting the locking mecanism and the rubbers.