Both experiencing the same problem,
One UD 8.0 got stuck in loop after I tried installing Koush Kernel
2nD one is running CM6.0.1, was fine until I tried using to read Phone #1s MicroSD to figure out what was wrong.
2nd phone (CM6) then restarted randomly while plugged into PC, which started the bootloop.
Tried everything, nandroid (Couldn't mount /Data), I wiped, factory reset, tried reflashing update.zip for CM6 phone.
Both phones are completely useless, not sure what to do at this point and CM6's owner was leaving town.
Any ideas? Ultimate way to unbrick a DINC? If you know of anything, please help.
A boot loop is not a brick. I would nandroid back to stock(you did this right?) or use an RUU.
grnmons said:
Both experiencing the same problem,
One UD 8.0 got stuck in loop after I tried installing Koush Kernel
2nD one is running CM6.0.1, was fine until I tried using to read Phone #1s MicroSD to figure out what was wrong.
2nd phone (CM6) then restarted randomly while plugged into PC, which started the bootloop.
Tried everything, nandroid (Couldn't mount /Data), I wiped, factory reset, tried reflashing update.zip for CM6 phone.
Click to expand...
Click to collapse
Does this mean you can get into hboot?
If yes, you should be able to ruu an official release..
Sent from my ADR6300 using XDA App
I do not have a great deal of experience, but since you can get in recovery, place King Kernel #3 on your SD card, boot into recovery and apply the KingKernals #3 zip file from your SD card for the 1st phone. See if that fixes it. Just sounds like incompatibility with the kernel if it happened right after you flashed it.
ziggymanILT said:
I do not have a great deal of experience, but since you can get in recovery, place King Kernel #3 on your SD card, boot into recovery and apply the KingKernals #3 zip file from your SD card for the 1st phone. See if that fixes it. Just sounds like incompatibility with the kernel if it happened right after you flashed it.
Click to expand...
Click to collapse
UD is an AOSP Rom, King's kernel does not support it at this time.
I would try a fresh install of the 8-26 leak. Do wipe first, then do dalvik wipe under advanced settings. Get deodexed version of rom Here
If that does not work let's get some information
Did you run unrevoked forever and get S-off status?
What radio version are you using?
You should not be borked if you are getting into recovery you should be fine.
@ToyTank
BOTH phones are - 2.05.00.6.11 S-ON, Neither are unrevoked forever.
Problem with phone 1 (UD) is that the SD card is completely messed up now. It's an 8GB that has nothing on it, the compuiter is reading it at 758MB. Any function of Recovery leads to errors mounting, so flashing stuff isn't working, nandroid as well.
Phone 2 (CM6) let's me flash stuff onto it, "Install from sdcard complete." but will continue into a bootloop when I restart the phone.
I attempted RUU last night and maybe I'm doing it wrong but the software is giving me an error connecting to USB. How should I go about installing the 8-26 leak? Just wipe > throw in PB31IMG and install?
I assume I don't need unrevoked forever for this, I tried 8-26 and flashed PB31IMG.zip, Device 2 Starts dancing until it says "Main Version is older! Update Fail". Anybody know a workaround?
Try formating the sd card to FAT32 using a computer. That might help with phone #1. Error with usb can be solved using these steps.
1. Try the RUU executable. it will give you that usb error, taking you to the black htc screen.
2. Exit the ruu program (leaving phone in that state) and run it again. This worked for me when I RUU'd mine.
Who knows though. It may have been a one shot deal.
sounds like you are trying a bunch of stuff without READING about what you are doing. you flashed kernels with a rom that CLEARLY states that they will not work and then you tried to flash unsigned roms through hboot which will not work without s-off and then you try to downgrade when you have the ota leak (radio 2.05) which will not work.
you either need to get the ruu working, get s-off applied or follow the steps to go back to stock hboot.
time for you to start doing your homework to get yourself out of this mess.
Neither are bricked. Ruu back to stock.
yeah bro not good practice
@Fretless, @Lafester, @GermanBrat. Thanks for the comments - going to try RUU 3.21.605 and report back.
Hey guys RUU worked for Phone 2 (CM6) but is not playing nice with Phone 1. USB connection error. I appreciate the help so far, any more ideas for this phone?
It's basically stuck in white htc inc screen and will go no further. It's completely wiped and nothing will mount in recovery. RUU can't detect a usb connection but the PC beeps when I connect via usb
I've search up and down all night looking for a solution for my problem. The other I let my lil cousin play with my phone. Somehow he got into the recovery and started formatting everything. After I found out my sd card was cleared completely I was like "its ok just put the rom back on the sd card and flash it" lets just say it didn't work. Each time it gets stuck at the splash screen. I was thinking maybe the custom splash is locking it up but I'm not sure on what to do. Anyone got any advice on what to do so I can get my phone back up and running?
IfcYipes said:
I've search up and down all night looking for a solution for my problem. The other I let my lil cousin play with my phone. Somehow he got into the recovery and started formatting everything. After I found out my sd card was cleared completely I was like "its ok just put the rom back on the sd card and flash it" lets just say it didn't work. Each time it gets stuck at the splash screen. I was thinking maybe the custom splash is locking it up but I'm not sure on what to do. Anyone got any advice on what to do so I can get my phone back up and running?
Click to expand...
Click to collapse
If it were me ... I would start over, reflash the recovery image, do a complete wipe, and flash a full rooted rom/radio image. Once everything is back working, update profile, prl, and then move on to your custom rom of choice.
i've re-flashed the recovery image and everything
I've tried flashing Synergy but just isn't happening. Could the custom splash be effecting it?
So after a while messing with i stuck my ad card in my friends hero to see if the data,android.secure file etc etc would have any effects but nope
IfcYipes said:
i've re-flashed the recovery image and everything
I've tried flashing Synergy but just isn't happening. Could the custom splash be effecting it?
So after a while messing with i stuck my ad card in my friends hero to see if the data,android.secure file etc etc would have any effects but nope
Click to expand...
Click to collapse
When you wiped, did you use something like Calkulin's "format all" zip? If you already did that then I would try going back to a stock splash image. Perhaps something went wrong with the splash image install.
Grab one of these PC36IMG.zip here and put it on your SD card.
It contains the stock splash screen and will basically RUU you. You will still have S-Off. Just get the one that corresponds with your HBoot. Then try reflashing recovery and wiping everything 3 times and flashing the ROM of your choice.
I tried to update my rom to the HellFire KitKat rom, but it failed, even flashing the gapps failed. Not sure what's going on with that. But now, when i try to reboot, it just goes straight to recovery. Is there any way i can access my SD card to put a different rom on there? I've never had a problem flashing roms ever. i have no clue what's going on with this. I just want The People's Rom back on here. Forget updating to new firmware
well for some reason it just decided to install after failing over and over. so i guess my problem fixed itself
I'm trying a different ROM now and it keeps doing the same thing! Luckily it's not stuck in recovery this time, but it keeps failing to flash. I don't get it? I've never once had a problem ever flashing anything on any android phone
Hi Community,
I have a massive problem and I hope you can help me.
I rooted my HTC One X successfully and tried to flash custom roms on it which kind of worked. I put the zip folder on the internat sd card and flashed it without flashing the boot.img.
Finnaly I found out to do that, flashed the boot.img but while installing the ROM the problem code/status 7 appeared and I had to restart the phone in order to put the right rom onto the phone, which i had on my computer.
But while booting, the phone just got stuck in bootloop showing the HTC logo.
I already tried quite a lot of stuff to rescue my phone, for example to restore the nandroid backup - didnt work, flash another backup onto phone - still bootloop, flashed a new rom with boot.img - still bootloop.
The only solution i could find was to unroot the device and flash the stock rom onto it.
Is that really my last resort or is there another way?
Thanks for your help.
Hello all. Wiped my ROM, tried to install a new ROM and it didn't work. Alright fine I'll just grab my backup and be on my way. No. Upon trying to use my backup I got the md5 mismatch error. So I fixed that by deleting the md5 file and it started to recover the backup. Then when I get to recoving /data I get an error after it does a few files.I can exactly see which file it takes a crap on. What am I suppose to do?
Am I screwed or am I missing out on something? Thanks all!
At&t galaxy s3
ROM I'm trying to recover is aokp
Clockwork Mod Recovery Version 6.0.4.7
UPDATE: Was trying to go back to stock....now phone has black screen. no vibrations, no nothing. The only thing I get is a noise from my computer letting me know it's plugged in. THATS IT. HELP!!!!!!!!
You can try the sdcard debrick IMG see if that helps
As for your backup, it sounds like it got corrupted somehow. Always be very careful forcing something to flash if the md5 check fails.