Develop Bugs

[Q] irc, myn's rls5, toastmod kernal.....wth is wrong

Ok since this the third time typing this here is the condensed version. Running myns rls5 ontop of toastmod kernel listed on same page. Initial flash went ok minus the Flickr screen, distortion lines laterally, horrendous battery life, weird boot process...osmonitor I had to install due to interference with the OS. Myns crashed a lot with in first flash. Also some one dumb down how to use an irc app cuz I'm also lost....also what IM service can I get hold of u guys on cuz I hate forums.... too impatient

Ok no help? Not even some direction for irc where I can get some real help? Well just flashed a diff kernel thanks for the help guys. The Droid community has been a very unhelpful one compared to iPhone....
(irc help would be awesome still since I now have some help with main issue- I enter all the correct info into the app but it shows nothin. I've tried several to no avail. I appreciate the help) second I've ran into more pretentious ppl in these forums for Android then others no offense to the good guys but just my exp. It was brash to say that in this post tho. Thank you guys again for the ones willing.

That's because even the biggest idiot can work an iphone.

Jataadroid said:
Ok no help? Not even some direction for irc where I can get some real help? Well just flashed a diff kernel thanks for the help guys. The Droid community has been a very unhelpful one compared to iPhone....
Click to expand...
Click to collapse
Jataadroid said:
Ok since this the third time typing this here is the condensed version. Running myns rls5 ontop of toastmod kernel listed on same page. Initial flash went ok minus the Flickr screen, distortion lines laterally, horrendous battery life, weird boot process...osmonitor I had to install due to interference with the OS. Myns crashed a lot with in first flash. Also some one dumb down how to use an irc app cuz I'm also lost....also what IM service can I get hold of u guys on cuz I hate forums.... too impatient
Click to expand...
Click to collapse
Patience dude. I didn't catch it, but what exact kernel are you using, net has a lot of em, the one in the OP of myn's thread you mean? What recovery(and version of that recovery, some versions of clockwork floating around that have some bugs i think) did you use to flash the rom? what radio version and pri version do you currently have installed? Which ROM were you coming from, and did you do a full wipe(data, cache, davlik cache) before flashing it? I have never experienced anything like you are describing whilst using Myn's, his ROMs have been solid. Give a little more info and surely we can help you get running smoothly again.

thanks for the reply heres the details...myn's rls5, net toast havs more, ra_superson
Sincerely thanks for your reply. Typing this on my evo as my screen tears on and off. Running ra_supersonic(newest ver.) With Myns rls5 on net havs more smartass as listed on page. Updated to current radio and pri as listed on his post. Only dalvik and cache wiped not data. Flashed
Hulu and data governor hacks...CPU is only overlooked to 1190 in smartass and can't go any higher. This was my first root and flash so came from stock 2.2 on 3.30 ver. Have noticed avg using temp is around 103 off charger, cameras broke, my CPU in system panel says I'm running 100% continuously. Did a fast reboot , norm reboot, and still doin it. I had diminished battery life from the get go, I understand battery life per clockspeed relation but have underclocked profile to try to assist, which only cause frustration when coming back from lock screen and its still tryin to switch profile. Lagged the phone nearly locked out several times cuz it couldn't keep up with my fingers.0003 hw....I think that's it. Thank you again

Looks like we're running nearly the same setup, minus my ra_supersonic 2.2.1 recovery. I have attempted the stock kernel furnished in the Rom zip but since it didn't offer overclock I switched to net havs more smartass. I do the dalvik and cache wipe each time.

Jataadroid said:
Sincerely thanks for your reply. Typing this on my evo as my screen tears on and off. Running ra_supersonic(newest ver.) With Myns rls5 on net havs more smartass as listed on page. Updated to current radio and pri as listed on his post. Only dalvik and cache wiped not data. Flashed
Hulu and data governor hacks...CPU is only overlooked to 1190 in smartass and can't go any higher. This was my first root and flash so came from stock 2.2 on 3.30 ver. Have noticed avg using temp is around 103 off charger, cameras broke, my CPU in system panel says I'm running 100% continuously. Did a fast reboot , norm reboot, and still doin it. I had diminished battery life from the get go, I understand battery life per clockspeed relation but have underclocked profile to try to assist, which only cause frustration when coming back from lock screen and its still tryin to switch profile. Lagged the phone nearly locked out several times cuz it couldn't keep up with my fingers.0003 hw....I think that's it. Thank you again
Click to expand...
Click to collapse
Not trying to be a smart ass but do you realize that by insulting us will not get you any help? Rhetorical question
From reading what you jus stated the obvious problem is you did not do a FULL WIPE as you should do when flashing between roms.
Also next time please be patient as those like myself who browse through this section to help impatient ppl like your self, do actually have a life outside of xda. Its been a big snow storm in the southeast so most like myself included are outside enjoying the snow!
DO A FULL WIPE THEN REPORT BACK!

Gonna ignore the soap box chatter...
Obviously know I didn't do full wipe.....just gonna wait for other poster

gotta do a full wipe if you are switching between roms
Sent from my PC36100 using XDA App

also make sure whatever kernel your using works with the 3.70 based roms, as many dont.
Sent from my PC36100 using XDA App

Ok. Well crap.... thanks guys since that is apparently my only option.

OneStepAhead said:
also make sure whatever kernel your using works with the 3.70 based roms, as many dont.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
The kernel was included in the op and I've seen tags with same setup as mine.

Jataadroid said:
Gonna ignore the soap box chatter...
Obviously know I didn't do full wipe.....just gonna wait for other poster
Click to expand...
Click to collapse
Sorry you feel that way but since i have had the hero, on every thread about a rom says wipe all! This must be a joke for someone as rude as yourself to come on here and disrespect those who are trying to help.
Next time you decide to flash a rom remember to do a full wipe because inside the data partition is files for the particular rom, if you dont wipe, the new files will just over lay but not delete the old one. This will cause conflicting issues within the files as the phone tries to do both at the same time.

Screen tearing and the "jigglies" as I like to call it have always come from kernels - in my experience. And just because someone might have the same set up as you, the way it affects your phone ccan be quite different as you are running different apps, different settings, etc.
First thing I would do if I were you is to freeze any kernel govenor you are using - no setcpu, no secreen off profile, no set on boot, no os monitor govenor, no nothing like that. You don't want want any of that going on when you flash a new rom or kernel.
I know you don't want to do a full data wipe so let's see if we cna get you going without that. I used to HATE doing data wipes, I don't mind so much now because I've learned that trobule shooting can frequently take longer than just doing a data wipe.
I would say #1 make sure you are using AMON RA. Power button-reboot-recovery. Wipe cache at least twice, wipe dalvik at least twice. Now JUST flash the rom (you've already said your radios are updated so you wont have a problem with this). Let the phone boot up and give it time to settle in. You wont have any screan tearing. Now you're running a completely stock Myn's rls5 rom. Check some stuff out, make sure your basic settings are good, make sure your 4g is not scanning, etc.
Make a nandroid of this and keep it.
Now start making changes if you'd like. Flash a different font, flash a different kernel, etc. But leave all the governors OFF until you have a kernel that you KNOW will run ok on your phone. For example - I can run 2 of ziggy's kernels but the others don't work for me. I can run a few of net's kernels, but many don't work for me.
So my basic suggestion is to make sure you get a stable, stock Myn's rls5 on your phone before you mod it. If you can't get that, then yes - you might want to wipe data. Doing a batch backup in Titanium is really easy and it makes restoring very easy as well. It's our own customizing that is time consuming because we are all probably very picky (and proud!) of our beautiful phones.

Thanks for the helpful info from ALL that posted. I understand the risk of the non entire wipe, nandroid is safe of original stock Rom but not of new one. After tinkering with setcpu I've gotten more consistent stability. I know I will reflash with an entire data wipe here soon to see results. Running ra_supersonic 2.2.1 recovery.
I've made list of check point when I test some new Roms and kernels. I have some more question on backing up user info from backed up apps but Im sure ill find it on here.
Now that my system is stable for the time being, some one mind help me setup irc? And also has anyone issues with camera breaking with this Rom or kernel? I should wait to wipe entirely to see if it fixes, but I'd rather not waste my time with this Rom or kernel if the camera won't work. Love everything else about this Rom, need to learn more about the kernel to praise it. Ra_supersonic 2.2.1 recovery i like also.

Jataadroid said:
Sincerely thanks for your reply. Typing this on my evo as my screen tears on and off. Running ra_supersonic(newest ver.) With Myns rls5 on net havs more smartass as listed on page. Updated to current radio and pri as listed on his post. Only dalvik and cache wiped not data. Flashed
Hulu and data governor hacks...CPU is only overlooked to 1190 in smartass and can't go any higher. This was my first root and flash so came from stock 2.2 on 3.30 ver. Have noticed avg using temp is around 103 off charger, cameras broke, my CPU in system panel says I'm running 100% continuously. Did a fast reboot , norm reboot, and still doin it. I had diminished battery life from the get go, I understand battery life per clockspeed relation but have underclocked profile to try to assist, which only cause frustration when coming back from lock screen and its still tryin to switch profile. Lagged the phone nearly locked out several times cuz it couldn't keep up with my fingers.0003 hw....I think that's it. Thank you again
Click to expand...
Click to collapse
You're welcome. I am late at getting back to this post, but yea. Definitely. As everyone else has suggested, you have to do a full wipe when changing ROMS. Only time you could get away with just wiping davlik cache and cache is when upgrading the same rom ( like from rls 3 to rls 4, and rls to rls 5), but even then, it doesn't always work. Full wipe is always recommended. I would also recommend downloading your apps one at a time from the market, and adding your mods one at a time, make sure everything is stable after each flash. Good luck.

QUOTE And also has anyone issues with camera breaking with this Rom or kernel? I should wait to wipe entirely to see if it fixes, but I'd rather not waste my time with this Rom or kernel if the camera won't work. Love everything else about this Rom, need to learn more about the kernel to praise it QUOTE
If your phone is the newer hardware (late 003 or 004), you can only use the stock kernel, or a kernel based off stock for the camera to work. That would be htc #15. I believe Net's 4.3 kernels are based off of that. I am also pretty sure that Net explains that in his kernel thread in the development section.

Thanks guys did the full wipe and reflashed, working ok except SD file permissions are screwed up now. I go to test camera and it says insufficient file permissions when I take a pic. I go to check in astro, I see all the file that are supposed to be there but no editing; it still shows rw. Did not have card in when full wipe was completed would that effect it? Any help? Haven't attempted another SD card. I hope this isn't the second SD card to be trashed during my rooting process. Atleast I can still see that there r files on there. Thanks for the help.
Also any help gettin set with irc? Still having a horrible time trying to work with it....it seems so simple.... so 0003hw are stuck with stock roms or ones based off them...I believe nets kernel on that page was. I will test it out and let you know. I just need to know about the SD card problem. Thanks again guys.

Theres been lots of issues with 3.70 based roms. I always stick to lower versions..usually 3.30 and have no problems.. i also hace seen alot of people having battery problems on 3.70 after updating to 1.90 pri. They usually downgrade to pri 1.77 and there good.....
Evo - Myn 2.2 RLS 3 - Clockwork - HBoot .76

r.storm85 said:
Theres been lots of issues with 3.70 based roms. I always stick to lower versions..usually 3.30 and have no problems.. i also hace seen alot of people having battery problems on 3.70 after updating to 1.90 pri. They usually downgrade to pri 1.77 and there good.....
Evo - Myn 2.2 RLS 3 - Clockwork - HBoot .76
Click to expand...
Click to collapse
This isn't true, the problem is ALWAYS the kernel. I'm running myn rls5 and mikfroyo 4.3 with an SBC #15 v7 kernel (i'll edit post and add the link) and I have had zero issues except I can't download MMS messages on 4g on mikfroyo.
Jataadroid said:
Thanks guys did the full wipe and reflashed, working ok except SD file permissions are screwed up now. I go to test camera and it says insufficient file permissions when I take a pic. I go to check in astro, I see all the file that are supposed to be there but no editing; it still shows rw. Did not have card in when full wipe was completed would that effect it? Any help? Haven't attempted another SD card. I hope this isn't the second SD card to be trashed during my rooting process. Atleast I can still see that there r files on there. Thanks for the help.
Also any help gettin set with irc? Still having a horrible time trying to work with it....it seems so simple.... so 0003hw are stuck with stock roms or ones based off them...I believe nets kernel on that page was. I will test it out and let you know. I just need to know about the SD card problem. Thanks again guys.
Click to expand...
Click to collapse
Okay, this process will 100% work. It's the one I've been using since my lowly mytouch slide oh so many months ago.
*before you do this, make sure you have backups of your nandroid and your rsa keys. I'll edit post and give you links on how to back up your rsa keys*
RSA Key back-up: http://forum.xda-developers.com/showthread.php?t=887900 ...since you're rooted you can go straight to the part where it says "if you're rooted do this.."
1. First you need to fix the sd card. Create a folder on your computer desktop and call it "my sd card". Plug your phone into the computer and select "disk drive". Next you're going to copy EVERYTHING from the sd card and place it in the folder on the desktop (and dude I mean everything! AS IS, DON'T CHANGE ANY NAMES). Then, you're going to unhook your phone, go to settings>sd and phone storage. Then you're going to format your sd card. Yes, do it, but make sure you have EVERYTHING backed up first. After that's done, plug your phone back in, select disk drive and copy everything from your "my sd card" folder on your computer and put it back onto your sd card.
*phew*
Okay now that the sd problem is fixed, here's how you fix the rest. You see, when you upgrade your PRI to 1.90 and your radio, etc etc you gotta update the kernel to a version that's 1.90 supported. I'll edit post and post a link to where you can find one OR you can just use the kernel that's included with myn's rom because it WILL WORK. *edit* the kernel I'm using has been taken down because of the witch hunt against SBC kernels. So for now, just stick with stock. It works just fine.
Anyway.
Steps to getting myn working perfectly.
*before starting, re-download myn rls5 in case the screen flickering was caused by a corrupted download*
1. Download Titanium Back-up from the market. Back up all the apps you want to keep (basically, anything you downloaded from the market as you'll get facebook, sense widgets, etc back). You can do this while you re-download the rom.
2. Make a nandroid back-up in case something goes seriously wrong. A rom that flickers your screen is better than a brick.
3. Once that back-up is done, reboot into recovery. Once there, you're going to WIPE EVERYTHING. Full data, cache and dalvik wipe. Yes, do it. There is no other option.
3. Flash myn's rom. Let it go all the way through. Do NOT flash a new kernel until you've found one that's 3.70 compatible and works with PRI 1.90. Myn rls5 is designed to work with the newest updates (which means a #15 kernel, like the one that came stock).
4. Reboot. If the screen is still flickering, then at this point it's a hardware problem. Flash back to stock, unroot and go get a new one. If it works fine, re-download titanium back-up from the market and restore all your apps. From there it's just putting your widgets back on your home screen.
From here, you can search the forums for a kernel that works with the newest updates. If you read them, they'll tell you what they're compatible with. Remember do NOT use an AOSP kernel with a SENSE rom, that's just spells IDIOCY. Until you find a kernel that works, stick with the one that came with the rom because everyone knows that one works.
I hope this helps. As for the IRC chat, not all the experts are on all the time. If no one is online that can help when you get one, try getting a few hours earlier or a few hours later.

Answers to common questions about SyndicateROM Frozen

This is a guide I’ve put together from my (in)experience with flashing ACS. It mainly comes from the replies of k0nane and theimpaler747 in the SyndicateROM thread. However, since there’s so many pages that can be tricky to search for idiots like me who just throw up random posts for others to solve their problems, I thought it would be good to summarize it along with anything I happened to notice from flashing a couple of Epics. Consider it the FIBI guide.
Step 1: Read all posts by k0nane on page 1 of the SyndicateROM thread before doing a damn thing! http://forum.xda-developers.com/showthread.php?t=976194
Instructions for CWM are in this thread: http://forum.xda-developers.com/showthread.php?t=897612
Useful hotkeys:
Download mode - Hold down 1 on the keyboard when you power on the phone
Recovery mode - Hold Volume down+camera+power to power on the phone
Reset phone - Hold volume up+camera+power. This generally works when the phone is completely locked up.
Flashing:
When going between versions of ACS, check their notes to see if you need to do anything other than flash. You can go between some versions without wiping or losing anything. You can also flash between standard and fully loaded without wiping or losing anything.
Sdcard doesn’t mount in CWM, but shows up in Android - Format the sdcard in Android.
Boot hangs on the Samsung screen – Redownload, format your SD card and reflash
Boot screen flashed between different things – Wipe cache & data 3x and reflash
Journaling:
Enable journaling – In CWM, go to backup and restore. Backup, then restore using that backup. Journaling enabled!
Make it so you don’t need journaling – Keep a copy of the ROM on your phone at all times. Should you ever have data corruption, jump into CWM and flash the ROM again. It’s quick, no wipes needed.
If you restore a backup made in CWM and want to have non-journaled again – Flash the ROM after restoring.
Other issues:
FC in a specific app – Go into manage applications and clear data for that app
FC in several apps – In CWM > Advanced, try fixing permissions. Can also clear caches, and if that doesn’t work, reflash the ROM.
If you have any major issues that seem unresolved, Odin everything back to stock with EB13, format your sdcard in android, re-download everything, re-install CWM, re-read all of k0nane’s posts on page 1 and try again.
If you want ads back – Install adfree from market and hit revert
If your phone is freezing often - Flash either the vision kernel found here: http://forum.xda-developers.com/showthread.php?t=1012136 or the Twilight 1.0.4 kernel found here: http://forum.xda-developers.com/showpost.php?p=12504067&postcount=5904. I haven't had the freezing issues, but I'd recommend trying the vision kernel first as it has some other potential benefits.
Recommended tweaks and add ons:
Fugutweaks – This will smooth out a few random things on the phone. I’ve noticed more responsiveness on the lock screen and icons on my homescreen. Small, but nice. Install the ZIP in CWM, file can be found here: http://forum.xda-developers.com/showthread.php?t=981125
Impaled Keyboard – Makes the keyboard less likely to skip keys. Still have some, but they’ve gone down a lot. I use the Speed Demon Edition, still had a fair amount of dropped keys with standard one. Install the ZIP in CWM, file can be found here: http://forum.xda-developers.com/showthread.php?t=1025533&page=18
SetCPU – Handles scaling the CPU and overclocking. Use ondemand setting for smooth performance. If you have issues when the phone is idle or it doesn’t wake up properly, set minimum CPU to 200Mhz. Free for XDA members, APK can be found here: http://forum.xda-developers.com/showthread.php?t=505419
Battery Calibration – If you want to calibrate your battery without going into CWM, grab the app from this thread: http://forum.xda-developers.com/showthread.php?t=1024867. It’s now available from the Android Market.
Vision Kernel – Pretty much Twilight + gives you 1.4Ghz and Voodoo colour which improves balance when brightness is at 100%. Flash in CWM, wipe dalvik. Kernel can be found here: http://forum.xda-developers.com/showthread.php?t=1012136
And a final note that I'm now about 10 hours into testing... if you are using fully loaded and want better battery life, really try standard. It very easy to switch, it flashes over fully loaded with no wipes or data loss, the only thing you lose is that it resets your homescreens. But really, this is day 1 of it for me and 10 hours in I'm at 62% battery remaining. Usually by this time I'd be around 20%.

Great info! I recently installed the newest SyndicateROM 1.1.0 on my Epic and the only trouble I had was with the included Twilight 1.1.0 kernel. My phone kept freezing and I would have to pull the battery to reboot.
This is an issue that has been documented with the ROM and is said to be caused by the kernel and its adjustments to voltage and overclocking, not all phones handle this well.
To fix the issue I flashed the Twilight 1.0.4 kernel, as suggested by k0nane, and I am about a day into testing without any freezing issues. The only problem is that the Twilight 1.0.4 kernel has a known issue with video recording and it does not work.
Let me say that the performance increase from installing SyndicateROM and ext4 are well worth the trouble.

Have you tried the vision kernel? That might fix your freezing without breaking video recording.

is your brightness at 100%??? what was the difference between standard and fully loaded again??

VeNoM vZ said:
is your brightness at 100%??? what was the difference between standard and fully loaded again??
Click to expand...
Click to collapse
What does the brightness have to do with anything? And for the differences, here's from the SyndicateROM thread:
k0nane said:
SyndicateROM Standard includes LauncherPro. All Samsung and Sprint bloatware are completely gone!
SyndicateROM Fully Loaded - the choice of ACS team lead rjmjr69 - features TouchWiz instead of LauncherPro, and adds in Social Network Sync, Facebook, BuddiesNow, Program Monitor, and the stock live wallpapers. All the rest of the bloat is still gone!
Click to expand...
Click to collapse

Catalyst Shift said:
What does the brightness have to do with anything? And for the differences, here's from the SyndicateROM thread:
Click to expand...
Click to collapse
The brightness for battery life.

No, brightness is not at 100%. I generally use 0-25%, though I'll kick it to 100% when viewing photos or when I'm outside. Even with the lower brightness setting, I'd always have to recharge in the afternoon. I'm still doing a lot of testing for ways of having the battery last longer, today is longest it's ever gone for. I'll be adding more information when I feel like I've got a solid way of having it all setup.

OP, could you add the freezes and "terrible battery life" solutions? Namely, flash the kernel in the second post or VisionKernel. It's the most annoying one to answer multiple times daily.
Thanks much for this! Hopefully people read it.

I want to get the battery situation on my phone sorted out before adding it to the list. I was having pretty bad battery life, but switching to standard and removing gallery has made my phone last all day for the first time ever. I want to do some experiments between setcpu options, juicedefender and the vision kernel to see what works best. Hopefully by this weekend I'll have a more detailed idea as to how to get better battery life.
But for now, anyone having battery issues my current setup is using ACS standard and replacing gallery with quickpic. This has doubled my battery life.

Hey wassup everyone, first time writer long time viewer, and first let me say thanks to all the great people that have provided us with great roms for the epic and the syndicate team as well, Im currently using a Epic 4G with sindicate rom freeze 1.1.0 and i must say its awesome, aside from my battery dying really quickly when im runing it at 1.3ghz its actually great, usually i end up operatig it at 800mhz to actually save some battery life last me for 3 days at a time, and when i have it pluged in or show off my awesome epic i raise it back upto 1.3ghz, big difference cuz when i raise it up there my battery drains rather quickly like 3 percent a minute or so.....
well anyways now that, thats says, I have CWM 3..0.5 with syndicaterom twilight 1.1.0 and ive been sucessful at loading custom boot animation, but one thing is that im having trouble is loading the animation with sound? any idea onhow i can od that?, what are the steps, cuz so far ive been using root explorer to transfer and change bootanimation to load up on my screen, but i have no idea where to put the sound or how to even get it to load with the bootanimation any one have any ideas? please help, i do all his trought my phone, put the bootanimation on my sd and work from there and trasfer it to the system/media, most bootanimation that do have sound on them say to put it on the system/custimization/resources but i look every where and the syndicate rom doesnt have that archieve just the system/media, how can i load the sound into my boot? and how can i change the power off animation as wll?

Maybe someone should make a wiki "Trouble shooting guide" formatted like the ones found in the back pages of user manuals..
This might.. just maybe (crosses fingers) alleviate the never ending repeating of questions in the main sfr thread

Catalyst Shift said:
Have you tried the vision kernel? That might fix your freezing without breaking video recording.
Click to expand...
Click to collapse
Just tested Vision kernel 1.1 and ran into countless issues. My phone would not open camera, gallery, or music apps. And after that debacle I didnt even bother to find out if any other apps were misbehaving.
The first sign of trouble came when I installed a fresh version of SyndicateROM 1.1.0 and then flashed Vision kernel 1.1. The phone booted-up fine but when I went to shut down it immediately froze and I had to pull the battery.
Im going to stay on Twilight 1.0.4 kernel for a while until I find something else.
I have tested Twilight 1.0.4 kernel for about a day or two and have not had any problems so far. I even overclocked with SetCPU to 1.2GHz without any issues.
tmspyder said:
Maybe someone should make a wiki "Trouble shooting guide" formatted like the ones found in the back pages of user manuals.
Click to expand...
Click to collapse
I would be more than happy to contribute my experiences if this gets up and running. PM me with any updates to the "SyndicateROM [TSG] WiKi"

Please Help a Novice
I have installed this ROM, followed the directions and thought I did everything right. But when I rebooted the phone, I just get the Clockwork Recovery screen. Have I bricked my phone? How do I recover? Please please please help...Haven't even had my phone for a day...

By the way, the error I'm getting is:
ClockworkMod Recovery v2.5.1.0
E:Can't open /cache/recovery/log
I backed up before I installed this ROM, and Restore brings me back to this same screen / message

mercerma said:
I have installed this ROM, followed the directions and thought I did everything right. But when I rebooted the phone, I just get the Clockwork Recovery screen.
Click to expand...
Click to collapse
Please elaborate on the steps that you took to install the ROM and CWM.
What version of CWM are you running?
What modem do you have installed (...DK28, EB13, EC05)?
Have you transfered the SyndicateROM 1.1.0 onto your SD card before you installed CWM?
Did you wipe data, cache, and dalvik cache at least three times each before installing the .zip?
Your phone most likely is not bricked, that is a very hard to task to achieve. Worst case scenario you may have to do a clean wipe with odin and flash the stock ROM to start the process over. We can try to help you with any issues you may have but in the mean time try searching to the forum to find answers to these questions.

Hey, great idea for the thread.
Something I learned:
I was having AWFUL freezing problems. Tried all the fixes (vision kernel, old twilight) to no avail. If these don't fix your problems, try Genocide Kernel (on these forums). Solved my problems.

Catalyst Shift said:
But really, this is day 1 of it for me and 10 hours in I'm at 62% battery remaining. Usually by this time I'd be around 20%.
Click to expand...
Click to collapse
Ok, so im thinking of switching to the standard edition of he rom cuz im currently using the fully loaded added the 1.0 kernel vision on it to get the 1.4ghz, and its pretty smooth its stable at times so im keeping it at 1.3 for now until its set more stable..... however when u said that ure at 10 hours and u still have 62% whats the speed u have ure epic set at and whats the brightness?

Nolyrics2 said:
Just tested Vision kernel 1.1 and ran into countless issues. My phone would not open camera, gallery, or music apps. And after that debacle I didnt even bother to find out if any other apps were misbehaving.
Click to expand...
Click to collapse
Fix permissions in CWM/etc.
Kernels cannot cause that. It's that simple.

Nolyrics2 said:
Please elaborate on the steps that you took to install the ROM and CWM.
What version of CWM are you running?
What modem do you have installed (...DK28, EB13, EC05)?
Have you transfered the SyndicateROM 1.1.0 onto your SD card before you installed CWM?
Did you wipe data, cache, and dalvik cache at least three times each before installing the .zip?
Your phone most likely is not bricked, that is a very hard to task to achieve. Worst case scenario you may have to do a clean wipe with odin and flash the stock ROM to start the process over. We can try to help you with any issues you may have but in the mean time try searching to the forum to find answers to these questions.
Click to expand...
Click to collapse
I used the one step root process I found here to install CWM 2.5.1.0. I then downloaded the ROM, copied it to my SDcard, then used CWM to install the zip from my sdcard.
I don't know what modem I have, is there a way to check with my phone in it's current state?
I installed CWM previous to transferring the rom to my sd card
I did not the first time, but per instructions on the page where I downloaded the ROM, I reformatted my sd card, redownloaded the ROM, wiped everything 3x's and tried to reinstall. Same result. I keep getting the error on just about everything I do that states "E:Can't open /cash/recovery/log"
And thank you for your advise, any more would be greatly appriciated. I did search the forum, but there is so much information, hard to find what I really want, especially as a novice. I plan to not be a novice for long thanks to xda!

mercerma said:
I used the one step root process I found here to install CWM 2.5.1.0. I then downloaded the ROM, copied it to my SDcard, then used CWM to install the zip from my sdcard.
I don't know what modem I have, is there a way to check with my phone in it's current state?
Click to expand...
Click to collapse
I could probably answer that question, im still a noob, but from what i know u need to install CWM version 3.0.5/6 in order for u to run does roms, thats why ure having trouble flashing it, since Syndicate roms are EXT4 Base Roms anything lower then CWM3 wont support since they are RFS files, go here and follow the steps
http://forum.xda-developers.com/showthread.php?t=976194
download the CWM3 and root it again, u can run the CWM Root over the previous 1 so dont worry, i did it that way and i had no problems what so ever, as to check to see what modem u had, go to settings, about phone, under base band version check to see if the last 4 letters says EB13, or DK28, or if u have the ECO5 which is the newest stock base update that came out.
Also its best to know if ure phone is from stock, or if u updated from any of the first 2 version updates, EB or DK, if u where like me that waited for the update and stayed at Eclair then updated when the ECO5 OTA came out then u should be fine....
Just incase u are from a update of EB or DK here is the link for does 2 versions of CWM3
http://forum.xda-developers.com/showthread.php?t=897612
if im wrong then someone please correct me im still a noob learning.
EDIT: just noticed that u said ure phone is messed at that point, umm u can try to do a factory reset then restart ure phone see if that fixes the problem, then try follow the steps above, if that doesnt work, u will have to download odin, which is also in that link and reflash back to stock, everything is there so if u follow does instrunctions u wont have a problem.....its actually pretty easy.....

Clockwork not so good.

Ok so I have been rooted for months. I have used a ton of ROMS. Currently using Warm 2.2. I tried several GB ROMS but not having custom kernals SUCKS. And I hate ASOP ROMS they are all too buggy and I need to record 720p too so that's out. So I use a nice Froyo Sense ROM. All was good until recently I noticed I have a problem with recovery. It be actin a fool. I tell it to wipe all data etc and it *does* it but it doesn't actually *do* it. So i get the message that it worked, I flash a new ROM, and when I get in my apps are STILL there. But I get FCs out the wazzu. This all came about when I decided to try Synergy. I then switched back to warm due god awful battery life thanks to the lack of custom kernals(i know they are out now but they weren't when this happened).
Now, I can't even get my market to work! And half my programs FC I'm assuming because they were installed under GB and now are on Froyo. I can't replace them however because the market don't be workin.
So, i now need to do a COMPLETE re-do of my phone. I don't need to go back to S-Off but short of that everything needs *fixing*. I need to somehow fix Clockwork, then i need to truly wipe the data and cache, then I need to finally put on a new ROM(Im thinking of having another go at Synergy I liked it a lot and now there are new kernals for it). But I am afraid to just install it, since I know Clockwork is boinked. And I know that other recover is supposed to be better so maybe I could try that but I've never used it and don't really know how. So if someone could post a couple steps or just links to help me fix this thing I'd be happier than a catfish at a rodeo!
Boogidy boogidy boogidy,
Amen.

Change recoveries: Amon_RA if you want backwards compatbility with older scripts, or TeamWin Recovery Project (which is really new, but doesn't support the old scripting style). Visit the development section to find these. Each thread has instructions on how to flash. Since you are S-OFF, it's as simple as putting a file on your SDcard and rebooting into the bootloader.
There are Custom GB kernels now, but they are still learning to crawl and in diapers

Amon RA ftw. I've never had issues with it. CWM is very unreliable.

Sounds more like user error if you ask me.
Sent from my PC36100 using XDA Premium App

Rem3Dy said:
Sounds more like user error if you ask me.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I didn't. And you don't know jack. Or you didn't read the post. In either case, your posting here was a waste of everyone's time. Don't you have some reality TV you should be watching?

Look for the amon_RA thread in development section. Install that (2.3) it supports old and new scripting. Cwm has known wipe issues anyway. The thread has all the flashing instructions u need. Also search for vr superwipe and flash that in recovery to wipe for you.
Sent From My Pocket

Landara said:
I didn't. And you don't know jack. Or you didn't read the post. In either case, your posting here was a waste of everyone's time. Don't you have some reality TV you should be watching?
Click to expand...
Click to collapse
Hahaha.. its your fault for not reading that cwm doesn't wipe correctly
Deck's + SZ + SuperCharger script + ViperMod script.

Crossrocker said:
Hahaha.. its your fault for not reading that cwm doesn't wipe correctly
Deck's + SZ + SuperCharger script + ViperMod script.
Click to expand...
Click to collapse
I knew it had issues with dalvik, I've never read anything about it not wiping your system data and apps. And anyway, if the programs at fault its not bloody well operator error is it? This post was asking how to fix my phone, not why it was broken(which is irrelevant since I'm looking to re-do everything anyway AND switch to AmonRa).

github said:
There are Custom GB kernels now, but they are still learning to crawl and in diapers
Click to expand...
Click to collapse
What exactly do ya mean there? The only thing I'm concerned with is battery life I often work 17 hour days and have to use my phone during that time. With Synergy that wasn't even remotely possible. But if the new kernals correct that then I'm happy

Landara said:
What exactly do ya mean there? The only thing I'm concerned with is battery life I often work 17 hour days and have to use my phone during that time. With Synergy that wasn't even remotely possible. But if the new kernals correct that then I'm happy
Click to expand...
Click to collapse
I got tired of worrying about my battery life and having to turn all of my radios off, etc just to make it through the day AND use my phone.
So I hit ebay and bought 3 cheap batteries (1500mah, I didn't want an extended one) which came with an external wall charger for $11 with free shipping. Delivery took about two weeks from China but it was so worth it. Now I just leave with an extra battery in my pocket and abuse the crap out of my phone. It's great, and an easy solution to anyone's battery life issues.
Sent from my PC36100 using Tapatalk

I've never had a problem with CWM but I've read a lot of bad things about it so I switched to amon ra. I havnt had any problems with it either. It's simple to use, if u can use CWM then u can figure out amon ra. If I'm not mistaken myn suggests only amon ra for synergy, and the freedom kernel works great with it. I don't think your nands from CWM work with amon ra. So you'll have to restore one then use Rom mngr to flash amon ra then back it up.then use Rom mngr to flash CWM and restore another, flash amon ra, back it up.....so on and so on.
sent from my synergized supersonic

[Q] Constant Reboots...

Hello everyone. I have not been too particularly active here mainly because I have had no real reason to post. I give thanks when needed, but don't really post. Well, now I am having an issue that I genuinely cannot figure out. I recently dropped my phone and the digitizer cracked big-time. When I went to replace it, the connector for the ribbon cable broke. So instead of buying a new logic board, I just decided to buy a new Evo. However, I couldn't afford the approx. $600 for the "without a contract" price. So I went to a local Sprint dealer in my town and bought a factory refurbished Evo. Here is where the problems start.
I have been having reboots constant with this phone. I knew that there were some issues with the Evo randomly rebooting, but I have never seen something like this. It happens about every minute or so. Sometimes sooner. Sometimes I luck out and it doesn't reboot for a few hours. I notice that it does not reboot at all while it is in recovery, which is a great thing. I have tried multiple different ROMs and each one does it. I am completely out of ideas. I don't necessarily want to take it back, mainly because returning it to stock would be a pain. However, it is looking like I have to. Does anyone have any idea? It is obvious that it is not a bootloop, because I am able to actually get into the launcher. However, within a minute, it reboots. Can old radios cause it to reboot like this? It did this even with stock unrooted.
If any information is needed, please let me know. I really want to get this working without returning.
Thanks
StompySan
EDIT: It would seem that flashing my Nandroid backup of stock rooted seems to stop the rebooting issues. Could the ROMs I am installing be conflicting with the radios, causing it to reboot?

If I were you, without unrooting, I would flash the RUU for your phone. Then flash the pc36img for Amon Ra.
Before all that, I'd also back up your SD Card, then reformat it, so you are basically starting from scratch. A good idea, before you restore everything to your SD Card, but after you flash Amon Ra, is to partition it for EXT3. ( http://themikmik.com/showthread.php?5669-GUIDE-TUTORIAL-Apps2SD-Guide&highlight=partition+sdcard )
A lot of the ROMS now will take advantage of that. Once that's done, you can restore your SD Card backup to your phone.
Then I'd make a nandroid of that stock/rooted ROM, so you can always go back to it if you need to. When I nandroid, I backup everything except cache.
Figure out which ROM you want, put it on your card along with DT A2SD and the kernel you want to use. Make sure it's a kernel for the type of ROM you want, either AOSP or Sense. Personally, I keep the best rated kernel for each on mine.
Go to Wipe in Recovery and wipe everything, EVERYTHING, except the SD Card, then flash your ROM, and in the same recovery session, flash DT A2SD.
Let it boot up and let it settle in before you do anything. For me, that means once the screen shuts itself off.
Back to recovery, wipe Cache and Dalvik-Cache, then flash your kernel, reboot and let it settle in again.
THEN setup your Google accounts and preferences.
For me, I'd go back to recovery and nandroid that setup, before you've restored your apps, and make another nandroid, so you have one of your ROM's Base.
Then, reboot and see if the problem is fixed. If it is, restore your apps and see how it goes. If it starts rebooting, you know it's in your apps, so you can go back to the nandroid you made and start form there, installing a few apps at a time

Thanks for your reply HipKat.
I followed your tutorial step-by-step. However, after flashing A2SD and rebooting, it bootlooped (not like what I was getting, but an actual no boot logo bootloop). I am assuming that the ROM that I flashed didn't like the A2SD. So I restarted the tutorial, skipping the part where you flash the A2SD script. It seems like it is doing great now! I have no clue what I was doing wrong. I was using CWM. Maybe that was the problem. Could it have not been wiping it properly?
Thanks again for the quick response!

1.There are some roms that provides a CPU speed of 1.2G. With those roms and setcpu installed manually by myself, my evo rebooted just like yours. I don't know why, too.
But after I wipe everything(as HipKat said) and flash other rom, my evo 4g works just fine.
2. Before flashing new roms, wipe everything is absolutely required, otherwise strange problems will keep coming out.
What I comprehend is that flash roms on phone is like upgrading OS on your computer, you can't run windows7 with XP's configuration, right?

Hey HipKat, I've noticed that you advise people to wipe everything but the SD card in Amon Ra. You may want to note that wiping battery stats is only good if you have a full battery and plan on calibrating properly. If you wipe battery stats at 70%, your phone won't charge past 70% (thinking that it's full) unless you use an sbc kernel. Just something to keep in mind.
I'm not knocking your directions, you help a lot of people out. It's just something to think about.
Sent from my PC36100 using Tapatalk

plainjane said:
Hey HipKat, I've noticed that you advise people to wipe everything but the SD card in Amon Ra. You may want to note that wiping battery stats is only good if you have a full battery and plan on calibrating properly. If you wipe battery stats at 70%, your phone won't charge past 70% (thinking that it's full) unless you use an sbc kernel. Just something to keep in mind.
I'm not knocking your directions, you help a lot of people out. It's just something to think about.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
You're right! I keep overlooking that because I never flash unless I'm fully charged.
My mistake on those posts. Thanks!

I was still getting reboots after doing all of that. I thought it went away, but it didnt.
79x1 said:
1.There are some roms that provides a CPU speed of 1.2G. With those roms and setcpu installed manually by myself, my evo rebooted just like yours. I don't know why, too.
But after I wipe everything(as HipKat said) and flash other rom, my evo 4g works just fine.
Click to expand...
Click to collapse
This has to be it. I changed the speed to 1.15GHz in SetCPU and it has not done it since. Thanks!
EDIT: Well, it was OK, but it has started again. I have no clue why it is doing it again...

Maybe you should try some classic roms that don't require app2sd, like kings' kinged kingdom.
Before I partition my sd card, with shooter E3D and synerge, my evo also sometimes reboot, but not so frequently as yours.

And the CPU speed should be below 998MHz on my device (HW version:004)! Set your cpu frequency lower first, then try some other roms.

79x1 said:
And the CPU speed should be below 998MHz on my device (HW version:004)! Set your cpu frequency lower first, then try some other roms.
Click to expand...
Click to collapse
It doesn't matter what speed I set it to. I had it at 998 before and it still rebooted.
79x1 said:
Maybe you should try some classic roms that don't require app2sd, like kings' kinged kingdom.
Before I partition my sd card, with shooter E3D and synerge, my evo also sometimes reboot, but not so frequently as yours
Click to expand...
Click to collapse
I am going to flash Synergy real quick. I have already tried the following:
EVOlvedROM r3chargeD
Cyanogenmod
Are there any other ROMs I should try?
EDIT: I recorded a video of exactly what it is doing. I am currently encoding it. I will throw a YouTube link up soon.

Kings' Alliance is the steadiest rom i've ever used, without sense 3.0 though. If you don't mind you could try this:
http://forum.xda-developers.com/showthread.php?t=1180048

Here is the video of the rebooting problem. Sorry it is so long. It seems like the one time I want it to reboot it took forever for it to. lol.
79x1 said:
Kings' Alliance is the steadiest rom i've ever used, without sense 3.0 though. If you don't mind you could try this:
http://forum.xda-developers.com/show....php?t=1180048
Click to expand...
Click to collapse
I will try this ROM later tonight. I probably won't be able to reply tomorrow, because I have to work from 10AM to 10PM (I hate long days, lol), but will reply as soon as possible.

MIUI, for the win, man!

OK, I can pretty much confirm that it is a hardware problem. I have tried every ROM I can think of. It always seem to restart when it tries to turn on the Mobile access. If it is connected to WiFi, it will not reboot. The moment it is disconnected, it starts. However, I know it is not because of a bad radio flash. I have tried re-flashing the radios and it still doesn't work. I have restored it completely back to stock (while keeping S-Off, naturally) and it still does it. So, I am going to be returning it tomorrow. However, I have one real quick question. I know how to unroot, but I am not sure on how to achieve S-On with the Revolutionary root. Can you just flash the Unrevoked S-On zip with this root, or is there a different method? I wasn't able to find anything out on this.
Thanks again for all of your help. I really can't believe how quick people on here replied.

It isn't your hardware, I had a similar issue on my phone, it wouldn't go past the evo screen (for hours), I updated my firmware and it worked.
Clear caches, flash this rom (supersonic_4.24.651.1_odexed-signed2 google it), it will update your firmware, then flash the rom you want on top of it

stompysan said:
OK, I can pretty much confirm that it is a hardware problem. I have tried every ROM I can think of. It always seem to restart when it tries to turn on the Mobile access. If it is connected to WiFi, it will not reboot. The moment it is disconnected, it starts. However, I know it is not because of a bad radio flash. I have tried re-flashing the radios and it still doesn't work. I have restored it completely back to stock (while keeping S-Off, naturally) and it still does it. So, I am going to be returning it tomorrow. However, I have one real quick question. I know how to unroot, but I am not sure on how to achieve S-On with the Revolutionary root. Can you just flash the Unrevoked S-On zip with this root, or is there a different method? I wasn't able to find anything out on this.
Thanks again for all of your help. I really can't believe how quick people on here replied.
Click to expand...
Click to collapse
You can flash S-On.zip directly from the recovery, I suggest you try out the method I mentioned in the previous post, before you go doing something drastic.

prometh1us said:
It isn't your hardware, I had a similar issue on my phone, it wouldn't go past the evo screen (for hours), I updated my firmware and it worked.
Clear caches, flash this rom (supersonic_4.24.651.1_odexed-signed2 google it), it will update your firmware, then flash the rom you want on top of it
Click to expand...
Click to collapse
Nonono, it goes past the Evo screen. It goes past the standard boot logo. However, once you are in the lockscreen, and it tries to connect to 3G, it reboots. It is not a standard no boot logo bootloop.

stompysan said:
Nonono, it goes past the Evo screen. It goes past the standard boot logo. However, once you are in the lockscreen, and it tries to connect to 3G, it reboots. It is not a standard no boot logo bootloop.
Click to expand...
Click to collapse
If you're gonna trade it in, you don't need to unroot. Chances are no one will ever know, as long as you have a stock ROM on there.

HipKat said:
If you're gonna trade it in, you don't need to unroot. Chances are no one will ever know, as long as you have a stock ROM on there.
Click to expand...
Click to collapse
Yeah. That's what I was reading. Plus, I rooted with Revolutionary, which doesn't have a method to enable S-On.
Last night I flashed the latest stock ROM. As soon as it booted up and got to the lockscreen, it restarted. I can't see it not being a hardware problem. I am going to return it today. Hopefully they don't notice that it is S-Off. Any suggestions on what to say if they do?

same issue
i have an old evo that is doing the same thing, i flashed the original ruu and it still does it. i just reported it lost.

help please with New Evo

I recently just got a new evo replacement with HBoot 2.16.001. and I have rooted it with revolutionary. I thoroughly wipe 3 times before flashing roms, and every rom i try freezes up after it loads up. I unrooted and rerooted 3 times already and dont know what to do. Any help will be appreciated.
Please???

1, stop unrooting. What recovery are you using? If you're still using CWM, get Amon Ra form the Development section and use that instead. If you have ROM Manager, don't use that to flash ROMs. It's really a pretty useless app.
With Amon Ra, go to Wipe and wipe everything except SDCard: and Battery Stats, if you're not fully charged.
New ROMs need a lot of space, so look up the guide for partitioning, also in the Dev section and partition your card before you flash the ROM. Make sure the ROM you flash has DT A2SD baked in, or else, get that file and flash it in the same session you flash your ROM in.
And remember, it takes upwards of 10 minutes for some ROMs to boot up the first time.
Click the link in my signature for more details

HipKat said:
1, stop unrooting. What recovery are you using? If you're still using CWM, get Amon Ra form the Development section and use that instead. If you have ROM Manager, don't use that to flash ROMs. It's really a pretty useless app.
With Amon Ra, go to Wipe and wipe everything except SDCard: and Battery Stats, if you're not fully charged.
New ROMs need a lot of space, so look up the guide for partitioning, also in the Dev section and partition your card before you flash the ROM. Make sure the ROM you flash has DT A2SD baked in, or else, get that file and flash it in the same session you flash your ROM in.
And remember, it takes upwards of 10 minutes for some ROMs to boot up the first time.
Click the link in my signature for more details
Click to expand...
Click to collapse
I used R.A. with my first evo and never had any issues. Its just this new replacement evo that giving me the blues. I'm oldschool when it comes to flashing. I wipe everything except sdcard at least 3 times in R.A. Recovery. No matter what rom i flash, it will boot up but after about 30 seconds to a minute, it will freeze and i am forced to battery pull.

Have you tried just letting it sit and see what happens??
I know MIUI, older versions did that, but if I just let it sit, once for 20 minutes, it worked itself out, and that was always on the first boot up or two.

HipKat said:
Have you tried just letting it sit and see what happens??
I know MIUI, older versions did that, but if I just let it sit, once for 20 minutes, it worked itself out, and that was always on the first boot up or two.
Click to expand...
Click to collapse
i did try that, and most of the time, especially with CM7 it would either sit there or reboot until i eventually just have to do a battery pull

I also just got two brand new EVOs. One I rooted no problem, the other is impossible to do. Using Revolutionary, I kept getting a partition write error no matter what I have tried. I am running out of idea.

aztilt said:
I also just got two brand new EVOs. One I rooted no problem, the other is impossible to do. Using Revolutionary, I kept getting a partition write error no matter what I have tried. I am running out of idea.
Click to expand...
Click to collapse
The wierd part is that with the stock rom while rooted its ok. But as soon as i flash anything else whether it be aosp or sense, it will lock up on me shortly after it fully loads up. I have been flashing roms since the evo came out, and now that i have a new one, its giving me the blues

aztilt said:
I also just got two brand new EVOs. One I rooted no problem, the other is impossible to do. Using Revolutionary, I kept getting a partition write error no matter what I have tried. I am running out of idea.
Click to expand...
Click to collapse
Have you tried reloading the RUU exe again and starting from scratch?