[Q] Synergy+GodMode won't flash - EVO 4G Q&A, Help & Troubleshooting

I keep re-downloading the rom but every time at the end during the boot image flash I get an error. Installation aborts and I get nothing if I try to boot. Can anyone help with this?

Make sure you clear out everything good. I had an issue in the beginning and had to wipe the cache real good. No issues since

I have tried. I have done numerous cache wipes prior to install. I don't know what the deal is. Thanks for the advice though!

I guess this is probably a stupid question but, would not having an ext partition on my sd card stop the rom from flashing?

d_cook said:
I guess this is probably a stupid question but, would not having an ext partition on my sd card stop the rom from flashing?
Click to expand...
Click to collapse
no having sd ext is fine. no problems as far as i know. but are you using Clockwork mod recovery? because the rom wont flash with clockwork you need amon-ra 2.3 there is something in the godmode scripts that is in an unsupported format for clockwork.

http://forum.xda-developers.com/showthread.php?t=705026
here is a link to the amon-ra recovery. if you have questions about how to install it feel free to pm me. btw you don't flash recovery's in a recovery so don't try to flash it in one

I'm gonna try that. I realised that I couldn't flash Mik's rom either. I think I may have an old recovery. Thank You! I was using Amon-RA. I think it was an old version though

d_cook said:
I'm gonna try that. I realised that I couldn't flash Mik's rom either. I think I may have an old recovery. Thank You! I was using Amon-RA. I think it was an old version though
Click to expand...
Click to collapse
yeah you might have been on 1.8 instead of 2.3 and if it still doesn't flash then its probably never going to. godmode seems to be tempermental with what phones it wants to work on and theres multiple people who no matter what they tried cant get it to flash. so cross your fingers and hope for the best

I had the same problem. Couldn't flash with cwm. So I flashed amon ra 2.3 and then flashed synergy rc2 god mode it took about 20 minutes but worked.
Sent from my rooted s off PC36100 using XDA Premium App

Thanks for the help. It turns out that I was running 1.8. I am on 2.3 now and all is good.
Sent from my Synergized GodMode Evo

Related

Boot Loop after new Rom

Whenever I install a new Rom I wind up with the boot animation looping. The only Roms that seem to work are Fresh and CM7. I've tried myn, emerald, cm6. Currently I'm using Clockworkmod. Can anyone supply some instructions on how to get past this? I'd really love to try some new Roms.
Thanks,
bk
Try installing it again. Do a all the wiping and see if that works. If not maybe there is a missing file or something. Like the .image file... but hope this helps.
Sent from my PC36100 using XDA App
ruben1221 said:
Try installing it again. Do a all the wiping and see if that works. If not maybe there is a missing file or something. Like the .image file... but hope this helps.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks for the info, I just tried rolling back my version of Clockworkmod to 2.5 and things seem to be going much smoother.
bkcoke said:
Thanks for the info, I just tried rolling back my version of Clockworkmod to 2.5 and things seem to be going much smoother.
Click to expand...
Click to collapse
No prob. Try using Amon ra, I think its better than clockwork mod. U can back up rsa keys and does a better wipe cleaning. Imo. Good luck.
Don't forget to hit the thanks button if I helped you.
Use Amon_RA Recovery 2.3 and make sure to format /system, /data, and /cache between ROMs. You can alternatively just flash a FORMAT_ALL.zip using Amon_RA or ClockworkMod 2.x to do the same thing. Just remember to Nandroid backup beforehand, and turn on signature verification for your ROMs to prevent any issues!

[Q] Hlep can't install rom on htc evo

Hello, just checking to see if anyone can help, everytime I try to install a new rom it says that it installes but then when I reboot it boot loops after the htc evo 4g screen. I have used clockwork recovery and also used ra-supersonic-v2.3. The only thing I can install is my nandroid that I have from a previous rom. The new update wont boot either. If any one can help please let me know.
Try wiping everything and then flash the rom. And dont flash two zips at yhe same time.
Sent from my PC36100 using XDA Premium App
ok tried it, still no luck, never gets past htc eco 4g boot screen
try it with both recoveries and if it still doesnt work try older recovieries by going into rom manager going into the very botom and click all clockwordmod recovieries and flash a different one.
I have also used a format all.zip, nothing. everytime i wipe everything multipule times it does the same. Only the nandroid works no other roms will. Please help
got it to install cm7 with no prob, I wanted to load a sense rom though
Anyone got any ideas, I have read all the other threads about this issue and have tried all the suggestions but nothing works
Sent from my PC36100 using XDA App
did you flash an older recoviery
Yes i did try diffrent recovery's no luck
well clockwork is your problem. lol. install amon ra v2.3 recovery. once on there wipe everything in the wipe menu except the rotate settings and the sd-card. flash your rom of choice and you should be set.
well clockwork is your problem. lol. install amon ra v2.3 recovery. once on there wipe everything in the wipe menu except the rotate settings and the sd-card. flash your rom of choice and you should be set.
Click to expand...
Click to collapse
Hahaha this +100
Sent from my PC36100 using XDA Premium App
Ok did this like ten times no help. It just wont load a sense rom.
+1
Sent from my PC36100 using XDA App
PhxkinMassacre said:
well clockwork is your problem. lol. install amon ra v2.3 recovery. once on there wipe everything in the wipe menu except the rotate settings and the sd-card. flash your rom of choice and you should be set.
Click to expand...
Click to collapse
That should work seen clockworkmod get messed up couple time. Even know thats what I use
Figured it out, had to unroot my phone and reroot it then it worked

[Q] Cant flash sense anymore or make a nandroid backup

Hi I recently flashed evo-decks 1.2 stable after I did that I had errors with any nandroids and I can't flash any sense or aosp ones either. I'm stuck and and stumped as to what my course of action should please any ideas would be fantastic thank you.
Well first, do you have a current working rom at the moment?
What he ^ said.
Sent from my PC36100 using XDA Premium App
yes I do its the evo decks 1.2z the one I found to be more of a stable version
[email protected] said:
yes I do its the evo decks 1.2z the one I found to be more of a stable version
Click to expand...
Click to collapse
Well backup the rom; make sure you have at least 500mb free space. Do a full wipe [factory/data, cache, dalvik cache], flash the new rom. Make sure you have more space, because the sense 2.1/3.0 can be big in backup size.
What happens when you try to flash another Rom?
Sent from my PC36100 using XDA Premium App
I get stuck at the HTC evo 4g screen just stays white and wont boot I have wiped it numerous times and I get the same result never happend until I flashed the 1.2 stable I also did flash the vipermod and Google apps as well as available memory mod I found I had used that multiple times before as well
Wipe everything 3x, use Virus's CR super wipe after you manually wipe everything. Factory wipe, cache and delvik cache. That should clear everything out. Then flash a Rom. It sounds like something isn't getting wiped.
Sent from my PC36100 using XDA Premium App
Well it says report to the recovery log to see what went wrong its preventing me from even Making a backup at all it says depot to recovery log to see what went wrong seems more serious no?
So because somethings not wiping properly that will give me an error telling me to view the recovery log and then prevent me from flashing different builds and making a nandroid backup I don't seem to see a link for the superwipe under virus I tried searching and i could not locate it is it on his website?
[email protected] said:
So because somethings not wiping properly that will give me an error telling me to view the recovery log and then prevent me from flashing different builds and making a nandroid backup I don't seem to see a link for the superwipe under virus I tried searching and i could not locate it is it on his website?
Click to expand...
Click to collapse
here you go.
http://bit.ly/jEjuoN
If I were you, I'd backup my SD Card, format it, repartition it, if you're using partitions, and then copy the essentials back over. Specifically, you're nandroid folder, then reflash your Recovery, which hopefully, is Amon Ra.
Then either try to reflash one of your nandroids, although if it was me, I'd just copy the ROM you want first, and then try to flash that, and it if goes well, try a nandroid you have saved.
I've had this happen twice and both times, reflashing recovery did the trick
Alright ill try thanks alot everyone I appreaciate your help ill get back to you guys hopefully with good news
Well so there's no way I could just wipe it with recovery and flash it over cause apparently I'm not the only one with this issue and somebody said it has to do with partitions of my SD card I'm trying to look into it deeper.
Sent from my PC36100 using XDA App
[email protected] said:
Well so there's no way I could just wipe it with recovery and flash it over cause apparently I'm not the only one with this issue and somebody said it has to do with partitions of my SD card I'm trying to look into it deeper.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
You don't have to partition it; first reflash your recovery via PC36IMG image, then copy your sdcard to a pc, format it, then copy the files back over, try to restore a backup, or reflash the rom.

Cannot flash any 3.0 roms

I have been trying to flash Shooter E3, MikG, and Synergy. I cannot get any of them to work!!! They flash fine but all get stuck in a boot loop. I have wiped everything, more than once and redownloaded all of them just to check. Every other Rom i have downloaded (CM6, Cm7, Fresh, Stock, Myns Warm, MIUI, etc.) all flash and work fine. Anyone have some ideas???
I think I read somewhere that u have to use RA recovery but not 100% on that. If ur on cwm then try with RA. If ur on RA then idk
Sent From My Pocket
Correct, and it has to be the latest version 2.3
Sent from my nike hating evo!
I am using 2.3, but does my sd have to be partitioned?
Sent from my PC36100 using XDA App
legasus233 said:
I am using 2.3, but does my sd have to be partitioned?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No it doesn't but it helps if you want more internal space for running a rom using A2sd
Jlallman said:
No it doesn't but it helps if you want more internal space for running a rom using A2sd
Click to expand...
Click to collapse
Ok, then any other ideas why any 3.0 rom I load results in an endless bootloop?
legasus233 said:
Ok, then any other ideas why any 3.0 rom I load results in an endless bootloop?
Click to expand...
Click to collapse
If you get a bootloop, that's because the phone wasn't wiped correctly. Be sure to do a full wipe [factory/data, cache, and dalvik cache].
{ParanoiA} said:
I think I read somewhere that u have to use RA recovery but not 100% on that. If ur on cwm then try with RA. If ur on RA then idk
Sent From My Pocket
Click to expand...
Click to collapse
RA is not required I flashed in CWM all the time, I use RA now because it wipes better just like Charmin!
---------- Post added at 11:53 AM ---------- Previous post was at 11:50 AM ----------
legasus233 said:
I have been trying to flash Shooter E3, MikG, and Synergy. I cannot get any of them to work!!! They flash fine but all get stuck in a boot loop. I have wiped everything, more than once and redownloaded all of them just to check. Every other Rom i have downloaded (CM6, Cm7, Fresh, Stock, Myns Warm, MIUI, etc.) all flash and work fine. Anyone have some ideas???
Click to expand...
Click to collapse
Oh! Btw I'm running Synergy RLS1 it was flashed in CWM just remember if you flash in CWM do it three times over or so it just seems to work better
I am using RA 2.3 and have been sure to wipe everything, every option except sd card (duh). I have wiped multiple times, tried Calkulins format all, kings format all. It seems to start looping right when the phone boots up and starts sending/receiving data. Could this be a radio problem??
Most of the 3.0 roms, shooter especially, take a very long time to load. Usually around 10 minutes on first boot...are you waiting long enough?
im having the same issue, everything worked fine till i tryed to use firerats method to install kingedrunny 0.3. now it just sits at the boot screen, 37 mins & counting now
i also noticed when i flash a new rom it takes abot 1 min which is unusually fast.
I waited upwards of 1 hour. I am thinking of throwing in the towel.
Sent from my PC36100 using XDA App
im back on a 2.xx rom till i figure this out. may just have to flash back to stock & start from scratch.
im going to try again in a few since i have to re do my nv items anyway
I fixed mine, here's what I did, hope it works for you
http://forum.xda-developers.com/showthread.php?t=1265585

[Q] Stuck inTWRP Recovery

Hello. I just switched my recovery to TWRP and i wiped my cache/ dalvik/ factory reset my phone, in preparation to flash some ROMs. So i tried flashing several ROMs and they either ended up failing or it claims to be successful and when i try to boot up it bootloops the htc splash screen. So i'm stuck on recovery since I can't even boot into a ROM. I need help!! I have S-On and i'm unlocked.
It seems like TWRP has always been wonky on the Evo. It was even bricking them on version 2.1 I think. My advice would betoswitch to the smelkus mod version of Amon RA. It has never done me wrong.
Sent from my PC36100 using xda app-developers app
I never had an issue when I used to run TWRP 1.0. Having said that, I've been running Smelkus recently and haven't looked back. You might try switching recoveries and running the superwipe function and wiping the Dalvik cache in Smelkus before and after you flash a ROM and see if that clears things up. You can do a search on XDA for Smelkus recovery to find the OP and download link.
Just curious, though. What ROM are you trying to flash?
Six6tring said:
It seems like TWRP has always been wonky on the Evo. It was even bricking them on version 2.1 I think. My advice would betoswitch to the smelkus mod version of Amon RA. It has never done me wrong.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I got it flashed.
FinZ28 said:
I never had an issue when I used to run TWRP 1.0. Having said that, I've been running Smelkus recently and haven't looked back. You might try switching recoveries and running the superwipe function and wiping the Dalvik cache in Smelkus before and after you flash a ROM and see if that clears things up. You can do a search on XDA for Smelkus recovery to find the OP and download link.
Just curious, though. What ROM are you trying to flash?
Click to expand...
Click to collapse
I've tried several ROMs like Nitrous, Blackbean, Team Dirt's ICS 4.0.4 ROM and the RemICS ROM, DigitalKarma, MokeeOS, and Holo. I just finished switching recoveries so everything should work.
I have to ask. Is your SD card partitioned properly?
death-by-soap said:
I have to ask. Is your SD card partitioned properly?
Click to expand...
Click to collapse
I'm not sure. I just bought my sdcard 3 months ago. Is there a way to check? But anyway, this thread is done.
Mobiono said:
I'm not sure. I just bought my sdcard 3 months ago. Is there a way to check?
Click to expand...
Click to collapse
If your not sure. Then it ain't. Go here to see how to Partition your SD Card. Most Roms have A2SD baked in and not having your card partition will cause issues.

Categories

Resources