Related
Ok, so here is what I have done: I have already rooted my phone, etc, and have flashed some different roms on my phone, and have not had any problems until now. I recently tried the miui rom, but didn't like it.I just flashed the newest miui rom, and it was acting really weird, so I decided to go back to the virtuous rom which I had used before. For whatever reason, I am getting this error: E: can't mount /dev/block/mmcblk0p1 (file exists), and the installation aborts. I did the wipe data deal, and I also tried to reinstall the miui rom. It says that installs fine, but it won't get past the htc incredible screen. Any suggestions? Also, I didn't want to try this and mess things up further, but can I restore a backup I had done when I had the virtuous rom installed, or do I have to have the rom already working properly? Kind of a noob question, I know.
calamari85 said:
Ok, so here is what I have done: I have already rooted my phone, etc, and have flashed some different roms on my phone, and have not had any problems until now. I recently tried the miui rom, but didn't like it.I just flashed the newest miui rom, and it was acting really weird, so I decided to go back to the virtuous rom which I had used before. For whatever reason, I am getting this error: E: can't mount /dev/block/mmcblk0p1 (file exists), and the installation aborts. I did the wipe data deal, and I also tried to reinstall the miui rom. It says that installs fine, but it won't get past the htc incredible screen. Any suggestions?
Click to expand...
Click to collapse
Hmmm... Do you have any Nandroids from earlier roms? That'd be the easiest route.
If not, since you can't even get to a homescreen, you might try an RUU reset, but let's hope it won't come to that for now.
I get that too, but only when going into the menu for Dalvik Cache wiping, and it never actually gets in my way, it just pops up and then I can keep going on about my business.
1. yes you can restore the backup whether a rom is currently working or not
2. post questions in the correct forum
If you can't get a nandroid backup to work, you may have to RUU back to stock.
Here's the older one that will still let you use unrevoked after. Just rename this PB31IMG.zip, load up H-boot, follow the prompts, and be patient. Then run unrevoked when it finishes and install rom manager to restore your backup. If the backup still won't work, try a fresh install of virtuous.
Sorry
g00s3y said:
1. yes you can restore the backup whether a rom is currently working or not
2. post questions in the correct forum
Click to expand...
Click to collapse
My apologies, where should I have posted? And can I move the thread so it is in the correct place?
calamari85 said:
My apologies, where should I have posted? And can I move the thread so it is in the correct place?
Click to expand...
Click to collapse
Probably in the Q & A General Forum, but don't worry about it this time, just as long as it doesn't end up being a frequent thing.
But I don't know about being able to move the thread, I think that's a Moderator power.
Regarding your issue though, either use the RUU link posted above, or try Nandroid-ing back.
No go
I tried restoring a backup, and got cannot mount /data, along with the previous error... It changed my boot animation, but has not restored my phone. should I do this RUU back to stock? Sorry for not being very good at this, and I definitely appreciate the help.
calamari85 said:
I tried restoring a backup, and got cannot mount /data, along with the previous error... It changed my boot animation, but has not restored my phone. should I do this RUU back to stock? Sorry for not being very good at this, and I definitely appreciate the help.
Click to expand...
Click to collapse
It's cool.
Yes, you'll need it on the root of your SD-card (not in any folders), run it through hboot, and then you'll have to re-run the unrEVOked tool from your PC. I would also suggest running the S-Off tool afterwards, just to be safe. That has saved me once before.
Make sure you have at least 50% battery before you do the hboot flash. VERY IMPORTANT. If your phone dies or loses power while updating the radio files from the RUU, your phone is as good as bricked.
If you get stuck with the unrEVOked tool at waiting for root for more than fifteen minutes, post back here again and we'll continue from there.
EDIT: Actually, run the unrEVOked Forever S-Off tool through CWM recovery before doing this, as a pure precautionary measure.
I'm an idiot apparently
Well, I am really sorry guys, I won't ask any more questions on here. Apparently I am super stupid. I figured it out, I left out some info because it didn't even register as relevant, but it was the key apparently. So I just go a new sd card, and I formated it on my computer, and just dropped the zip files on there, and was trying to flash like that, and apparently the phone didn't like the new sd card, or it needed info off the old one, because once I put it back in and tried flashing from it, it works fine now. Sorry for bothering everyone, I am going to go sit in the corner in shame now.
calamari85 said:
Well, I am really sorry guys, I won't ask any more questions on here. Apparently I am super stupid. I figured it out, I left out some info because it didn't even register as relevant, but it was the key apparently. So I just go a new sd card, and I formated it on my computer, and just dropped the zip files on there, and was trying to flash like that, and apparently the phone didn't like the new sd card, or it needed info off the old one, because once I put it back in and tried flashing from it, it works fine now. Sorry for bothering everyone, I am going to go sit in the corner in shame now.
Click to expand...
Click to collapse
Hahaha! No worries, we all have our moments!
Glad you figured it out. Be sure to make a backup of your current rom on your new SD card right away haha.
Hi guys, I've had a Bell-branded Desire Z (on AT&T's network) for some time now, but I've never gotten around to rooting / flashing a different ROM on it. Since I have some free time this weekend, I figure I'll finally tackle it. Have a few general questions though:
1) Is the method listed in the guide: http://forum.xda-developers.com/showthread.php?t=928160 still the best method for rooting a desire Z? I've heard bad things about visionary, but every rooting method I've read seem to involve it in some way.
2) with S-OFF, am I free to flash any Desire Z / G2 ROM? or will only certain ROMs work with a Bell Desire Z? Any specific recommendation on ROMs? I'm planning on trying out CM7, then going from there
3) What is the best method for backing up my current image + a few other things (mostly contacts and SMS)? Titaniumbackup gets thrown around a lot, but I only have a handful of apps, and really would rather just redownload them then go through the trouble of backing them up
Thanks
http://wiki.cyanogenmod.com/index.php?title=TMobile_G2:_Rooting
that is going to be your safest way to root your vision. eventhough this is longer, there is a lot less chance of bricking your phone. the one you listed is very simple to do, but runs a high risk of turning your phone into a paper weight.
when you do have your phone completely s off, you now have every right to flash kernels, roms, and other things. you can find all of the things i just listed over in the development forum on the g2/desire z. download rom manager from the market. that allows you to back up your current rom, flash the latest recovery and so on. it just allows you to not have to manually install everything. it has the popular g2 roms under the "download rom section".
in terms of backing up everything, there are a few different options. every contact to save is linked to your gmail account, so whatever rom you flash and load youll always have those contacts coming with you. thats the beauty of google and gmail on a android device! but with rom manager, you can back up your current rom and image with that app and save it to your sd card. BEFORE YOU FLASH ANY ROM, OR BEGIN TO START TRYING OUT ROMS, BACK UP YOUR STOCK ROM. whenever i got my g2 when it first came out, i made a nandroid backup of my stock rom and i still have it. when i originally backed it up, i just named it "stock" and havent messed with it since. i just know that i have the stock image(it helps me sleep at night). jk, heh. for your text messages and stuff, download sms backup from the market and you can back everything up through that. all of the apps that you download, including the paid ones of course, travel with you between roms, etc.
i hope i helped ya out, and i wish you luck. if you have any other questions, just shoot me a private message!
Thanks for that;
I actually went ahead and used that method in the guide since upon further research, it seems that visonary was only causing issues when it was use for perm root; temp root, which is what that method uses visionary for seems to work fine.
So did that, reboot into the bootloader, confirmed that I had S-OFF on the first line.
Installed ROM manager from the market
Flashed Clockwork recovery
Booted into recovery and did a system backup to SD card
Rebooted and decided to download the Virtuous ROM from ROM manager
Told it to reboot into recovery and flash that image, wiping all data and settings
Got stuck on an bootup loop (HTC logo + start up sound -> black screen -> HTC logo + startup sound ad infinitum)
Rebooted into recovery, and did a restore from the backup (whew)
Phone seems to be working fine now
Now I'm trying to figure out what went wrong... any ideas?
K, I redownloaded virtuous from XDA, checked the MD5, and tried to flash it again.
Same problem, infinite loop on startup screen.
Do i need to flash the engineering hboot? I was under the impression that that wasn't necessary for using custom ROMs.
Still can't figure out what's wrong.
did you debrand? http://forum.xda-developers.com/showthread.php?t=835777
Have you tried flashing through CWM directly? I really don't like ROM Manager for flashing new ROMs and seems to oversimplify the process to allow green users to get on the flashing wagon.
I would boot into CWM (camera + power i think) and do a complete wipe + flash from in there. I have never had an issue with doing things directly from recovery and I have a Bell DZ as well. It's long since lost it's blue and white colours, but that was it's origin
Have fun!
Im new to this stuff here, and i DO want to learn about it as this stuff is very interesting to me! Technology is something i learn very quickly if im directed in the correct direction
The question i have here is about my Desire Z ( Bell Cannada ).
A few months ago we received a OTA update. So its currently running on Android 2.2.1 : Build - 1.84.666.2 CL322105, and its SUPER slow! Is it still possible to root this version?
I want to install the Gingerbread version on my phone, but i cant find instructions to root this OS version to be able to do so.
Or should i wait till the Official gingerbread Os to come out for our phones?
Ive been searching every where's for this info and everything i find is all back dated to last yr and nothing up-to-date after the OTA.
I hope this question is not TOO n00bish as i tried to search every where for it, and ether i could not find it or i did not enter the correct word search to get a result i needed.
Thanks in advance!
Andrew
Edit: NVM my question here.... i have finally found an update post within the wiki ( April 1 2011 )
Sorry for a useless post!
Thank you all for your efforts in posting in this forum! Very informative!
Athrun88 said:
Have you tried flashing through CWM directly? I really don't like ROM Manager for flashing new ROMs and seems to oversimplify the process to allow green users to get on the flashing wagon.
I would boot into CWM (camera + power i think) and do a complete wipe + flash from in there. I have never had an issue with doing things directly from recovery and I have a Bell DZ as well. It's long since lost it's blue and white colours, but that was it's origin
Have fun!
Click to expand...
Click to collapse
heh. that actually worked. Flashed directly from CWM recovery and it booted up with no issues.
Guess I know not to flash from ROM manager anymore
Thanks.
deaththeorist said:
did you debrand? http://forum.xda-developers.com/showthread.php?t=835777
Click to expand...
Click to collapse
You do not need to debrand to flash custom ROMs to the Bell Canada Desire Z.
makken85 said:
heh. that actually worked. Flashed directly from CWM recovery and it booted up with no issues.
Guess I know not to flash from ROM manager anymore
Thanks.
Click to expand...
Click to collapse
Interesting, I've flashed many ROMs from ROM Manager on my Bell Canada DZ, and never had an issue. That said, flashing from recovery is really not any harder, so if it works, it works.
redpoint73 said:
Interesting, I've flashed many ROMs from ROM Manager on my Bell Canada DZ, and never had an issue. That said, flashing from recovery is really not any harder, so if it works, it works.
Click to expand...
Click to collapse
Yeah, I assumed that flashing from ROM manager just meant that it rebooted to recovery and flashed it from there. I guess there is a difference.
Either way, been playing with Virtuous 1.0.2 for a few days now, really like this ROM, but I'm itching to try out something different now. Man, I can see this is going to develop into a time consuming hobby.
Plus, I'm going to need a bigger SD card to store all of these ROMs + backup =X
Oh, another noob question; I've come across a few zip files that included a system folder and an META-INF folder. How exactly do I install these?
G2 only works with at&t
alright here it is my t-mobile G2 won't connect to the t-mobile network at all, I've went through 3 SIM cards because this thing use to kill the SIM card from working on other t-mobile phones and it works perfectly fine on at&t network. so I've unlocked so it will work on at&t just to see if it would work. so i gave p and bought a MT 4G, but i still want to know if the G2 is fixable because I'm just about ready to throw in the towel this is what I've tried to resolve the problem called t-mobile they ended up saying just return the phone but i can't since i didn't buy it from them. Called them again got the unlock code. I've flashed the radio a few times. I've also just got the leaked 2.3.3 update and nothing has worked. It find t-mobile network but says your SIM card isn't allowed to connect to this network then after trying again it says unable to connect to network please try again later.
Just so frustrating i don't know what to do just about to say forget it. this thread is my last resort.
also i still have S-OFF
i used this method on my G2 just yesterday and put on CM7.0.3. the only issues i came across were because i restored everything (should have just done apps and app data) using Titanium, which put me in a boot loop. I'm dumb, so i did it twice before i figured out what was the problem. the thread has a comment about how Visionary is dangerous, but the OP responded that since it is only used to gain temp root, there should be no problems.
So, I don't really post on forums because I'm pretty tech-savvy, but I have a big problem that I can't fix, and I can usually fix everything (thanks to you guys!)
This morning, my incredible acted up as I was checking an e-mail and it froze, so I decided to battery pull because restarting my phone didn't work. (Note, my incredible has been running VERY solidly on a CM7.1 nightly). As I tried to boot up the phone again, it would stay on the white HTC Incredible screen. When I rebooted into recovery thru HBOOT, i realized that there was an error mounting something, like recovery_log, or something like that (i didn't mind this because I thought I knew what I was doing), but I tried restoring my old nandroid backup that was working well, but it didn't work. It said it couldn't format /data or something... It ended up staying on the white HTC incredible screen. So, I wiped data/cache like 10 times, and dalvik cache as well and tried re-flashing a clean install of cm7.1 stable, but didn't work again - led me straight to the white Incredible screen. So, installing a fresh rom AND restoring a solid backup didn't work... so...
I found the RUU 2.3 stock rom on the development forums, and tried to install that like I do with the radios (PB31IMG.zip) through HBOOT, but no cigar. It did go PASSED the white screen, but boot loops at the Droid eye.
So, I thought I'd find a different stock img, and found the 2.2 official OTA .zip and installed it the same way, but got the exact same result (boot loops, forever).
Any suggestions? I can't think of anything else.... I feel like my phone is bricked, but I didn't do anything to make that happen.
I feel like something happened that made me not able to format the /data, and stuff. I even formatted my SDcard in case it was the problem.
Any help is appreciated. Thanks!
Load the RUU onto a different fat32 sd card and see if you are able to boot.
Sent from my ADR6300 using XDA Premium App
i'll try that and give an update. thanks for the reply!
*update* no luck. same thing happens. i tried on three different sdcards formatted fat32...
Can you factory reset and flash a ROM from a different sd than the one you were using? Description sounds like bad sd, and AOSP roms interact with the sd on boot. If original (CM 7) sd is toast, it'll never boot, hence different sd card and prefably RUU
Sent from my ADR6300 using XDA Premium App
I had this happen once where no matter what rom i flashed all i got was bootloops. I had to get the stock froyo ruu.exe that you run from your pc and install it that way. Then once installed boot up and go to settings/sd & phone storage and do a factory reset from there. This factory reset is a true reset as it wipes out vzw programing also. After reset folow on screen steps to reactivate your phone, you can skip the rest of the setup. Once thats done your good to go just flash clockwork or amon ra recovery and then flash what ever rom you want. No guarantees but it worked for me.
NOTE: This assumes you are s-off, if your not after flashing the ruu you will have to use unrevoked to regain root and s-off again.
You can also try wiping /system and /boot.
*token post to get my post count high enough to ask for help in the hacking section, dumb rule btw. FAIL*
Mine is now stuck in a continuous boot as well. It's not rooted and have no idea how to fix it.
I see instructions in this thread but they mean nothing to someone who doesn't know what the abbreviations stand for or how to go about the commands required.
sl4m said:
*token post to get my post count high enough to ask for help in the hacking section, dumb rule btw. FAIL*
Mine is now stuck in a continuous boot as well. It's not rooted and have no idea how to fix it.
I see instructions in this thread but they mean nothing to someone who doesn't know what the abbreviations stand for or how to go about the commands required.
Click to expand...
Click to collapse
if you are non root. you will need to download the RUU.exe for 2.2 and install if from you pc.
http://androidforums.com/htc-droid-...mplest-instructions-ever-windows-xp-only.html
follow that and your phone will be back to the day you got it out of the box.
All the recommendations prior to Synisterwolf's post require root.
Some of the "abbreviations" are detailed in the Droid Incredible Development section. If you head over there you can read up on a beginners guide to root terms and helpful links in one of the top four threads namely:
If You're New to Modding/Rooting, Read This First! (Updated 08/05/10)
I will say though:
CM7.1 = CyanogenMod 7.1 (this is a rom)
OTA = Over The Air
2.2 = Froyo (Android software version 2.2)
RUU = basically refers to a file that people use to revert back to the Droid Incredible's pre-root status. Although there are additional steps as well.
SlimSnoopOS said:
All the recommendations prior to Synisterwolf's post require root.
Some of the "abbreviations" are detailed in the Droid Incredible Development section. If you head over there you can read up on a beginners guide to root terms and helpful links in one of the top four threads namely:
If You're New to Modding/Rooting, Read This First! (Updated 08/05/10)
I will say though:
CM7.1 = CyanogenMod 7.1 (this is a rom)
OTA = Over The Air
2.2 = Froyo (Android software version 2.2)
RUU = basically refers to a file that people use to revert back to the Droid Incredible's pre-root status. Although there are additional steps as well.
Click to expand...
Click to collapse
RUU = ROM Update Utility
no luck, I installed the program on my XP machine, but the app can't connect to the phone.
The phone literally keeps rebooting over and over.
sl4m said:
no luck, I installed the program on my XP machine, but the app can't connect to the phone.
The phone literally keeps rebooting over and over.
Click to expand...
Click to collapse
Then its gotta be a hardware failure.
Sent from my sexy assistant. (AMOLED HTC Incredible)
wow... what a bummer. thanks for the help anyway, it's much appreciated.
sl4m said:
no luck, I installed the program on my XP machine, but the app can't connect to the phone.
The phone literally keeps rebooting over and over.
Click to expand...
Click to collapse
Does it give any specific error code when it says it can't connect to the phone?
Someone correct me if I'm wrong but don't you have to have HTC sync installed on your pc to use an ruu.exe? Do you have that installed?
Sent from my ADR6300 using xda premium
I'll try it again to verify the code, I'm pretty sure it was "170"
sl4m said:
*token post to get my post count high enough to ask for help in the hacking section, dumb rule btw. FAIL*
Mine is now stuck in a continuous boot as well. It's not rooted and have no idea how to fix it.
I see instructions in this thread but they mean nothing to someone who doesn't know what the abbreviations stand for or how to go about the commands required.
Click to expand...
Click to collapse
I had this issue the first time i rooted my phone and attempted to put on a ROM, and i resolved it when i found this post to get back to stock. I also used this to fix a problem where my phone had a black screen with a line through it on booting to recovery or attempting to do a nandroid back up:
droidforums.net/forum/droid-incredible-hacks/95406-how-correctly-unroot-incredible.html
All i did was basically use the PB31IMG Method without turning s=on, ( i had stock radio and still have 7.28 )
1) download that PB31IMG.zip and drop it on the root of your sd card ( it has to be named ( PB31IMG.zip ) so make use you have file extensions showing on your PC.
2) boot to hboot and and let see the file and install it
3) used unrevoked ( remove sd card ) to aquire root again.
idk if this helps, but this seems to get me out of the few weird situations i had
sl4m said:
I'll try it again to verify the code, I'm pretty sure it was "170"
Click to expand...
Click to collapse
Check this out to fix your 170 error.
http://androidforums.com/incredible...170-171-solution-windows-7-a.html#post1472468
This low key happened to me and I booted in to HBOOT and went to clear storage and it did its thing and booted up, from there I had to activate it then I was set!
Sent from my ADR6300 using XDA App
=D
Sent from sweet snacks off tapatalk.
So, as people know, the newest builds of CM7 or CM9 by JackpotClavin require it to be placed on top of a fully updated Gingerbread Droid Pro. However, those of us with a US Band unlocked radio can't do that without losing our unlocked radio since there is no unlocker for the gingerbread radio. Based on what Axl did for the Droid 2 Global, I've created a gingerbread kernel based on the Droid Pro to allow us to install gingerbread roms while maintaining our unlocked radios. I've also created a clockworkmod backup that can be used as is, or as a base for installing another gingerbread rom such as CM7. Thanks to JohnS and dettofatto, the kernels and clockworkmod backups were updated to 4.7.3. Below are the Resources and the Process.
Resources:
1) RDS Lite (http://forum.xda-developers.com/showpost.php?p=19390783&postcount=1)
2) SBF 2.26 (http://db.tt/5gKwCQwF)
3) TBH Radio Unlocker (http://goo.gl/6NuuG - http://www.mediafire.com/?9pfbk846tjb5a36)
4) Root (http://www.psouza4.com/Droid3/)
5) Droid 2 bootstrap (http://www.mediafire.com/?g8l7vy0futbc4g5)
6) Kernel (US http://www.mediafire.com/?swv4bl7wa47mpxg or EU http://www.mediafire.com/?w6963rmkvdqmro1)
7) ClockworkMod Backup (Verizon US http://www.mediafire.com/?yhr4b768qbnyote or European http://www.mediafire.com/?wn3pyy5fw3i1nr2)
8) Optional Roms - CM7 for Droid Pro (http://goo.gl/M6e4s) or Apex for Droid Pro (http://goo.gl/sTwSp)
Process:
1) Boot to Recovery & Wipe Data (R+M+Power)
2) Boot to Bootloader (Up+Down+Power) & SBF to 2.26 (Using RSD Lite & SBF file) - Usually I have to copy SBF File to root of Hard Drive & name it 2026.sbf or it may fail (ymmv)
3) Skip Activation (http://goo.gl/n2Zhw)
4) Settings->Applications, Set Unknown Sources and USB Debugging (in development)
5) Root
6) Install Bootstrap apk, open, press 'bootstrap recover'. then 'reboot recovery' to boot to recovery mode.
7) While in recovery mode, and without rebooting at all:
...a) Wipe Data
...b) Install Radio Unlock
...c) Install Kernel
...d) Restore Clockworkmod backup (you should have extracted the clockworkmod zip so the folder is located on your sdcard at [ie clockworkmod\backup\...] folder (with the system.img and other images under that folder))
8) Optional - Install cm7, apex or other rom you download
9) Reboot
Notes:
1) You can build your own Clockworkmod recovery file by following the JackpotClavin link below and then just backing up your build. It won't have signal while you're doing it (because of the locked radio), but after you restore it later using the above steps, it'll be fine.
2) Your SIM needs to be unlocked from verizon (i used sim-unlock.net) to work.
3) Info on an Argentinian 2.3.6 rom here
Credits:
JackpotClavin - CM7 for Droid Pro (http://goo.gl/M6e4s)
Axl - Created the Droid2 Kernel which allowed me to use the same method for the Droid Pro (http://goo.gl/ErLAR)
dettofatto - Clockworkmod backup and kernel for European 4.7.3
JohnS - Clockworkmod backup and kernel for Verizon US 4.7.3
Good Luck!
hey im from argentina, here we have Motorola Pro which is the same as droid pro but it doesnt use cdma, it uses gsm and hsdpa. Can i install this on my phone or will it turn to a nice brick?
now i have ANDROID 2.2.2 and it says that the phone is the xt610 same as the droid pro.
thanks
edit: i just followed your source (jackpotcalvin) and it says it should work with gsm but there are still issues
bveditz, thanks for your work.
i have a droid pro (unlocked, verizon branded).
right now i'm using android v2.2 because the TBH radio hack only works with this version. i didn't dare doing any updates because of that. lol. i have one questions.
my phone is already sim unlocked.
so with this new CM7 build, can i just flash and use it without doing the TBH radio hack all over again?
chagla said:
bveditz, thanks for your work.
i have a droid pro (unlocked, verizon branded).
right now i'm using android v2.2 because the TBH radio hack only works with this version. i didn't dare doing any updates because of that. lol. i have one questions.
my phone is already sim unlocked.
so with this new CM7 build, can i just flash and use it without doing the TBH radio hack all over again?
Click to expand...
Click to collapse
Yes, you don't need to unlock the radio, you can start from step 5 (or 6 if its already rooted) and just skip the part about running the radio unlock. Running the radio unlock again doesn't hurt anything either.
Just a word of note, I don't know how the froyo build is by default (i didn't use it), but the current CM7 build still has the issue with switching between mobile data and wifi data, and mobile data can also cut out at times. All that info is in the CM7 discussion, but it's worth noting that the Droid Pro CM7 Build isn't a final build and might not function with the same stability as the Froyo build did. This has nothing to do with this process, it's just the current state of the CM7 rom at the moment. Flashing APEX might produce better results with the radio, but you lose features of CM7, although it has a number of its own features.
installed it. i just started with step 7C. so far so good.
radio is working. sim is still unlocked.
so far i've found one thing, maybe i didn't see the setting yet. the keyboard back lights aren't working?
chagla said:
installed it. i just started with step 7C. so far so good.
radio is working. sim is still unlocked.
so far i've found one thing, maybe i didn't see the setting yet. the keyboard back lights aren't working?
Click to expand...
Click to collapse
No, with that issue and the wifi/radio issues (loosing connection and not being able to switch between the two) , I switched over to the APEX ROM, it's more stable. You don't get the features of CM7, but it has less bugs. Might want to try that. You don't need to do anything different, just put the apex file on your SD, reboot to clockwork mod and wipe data and reflash.
is it possible to use this in some way to have band unlock and normal ginerbread without cm7
Yes. You need to basically upgrade Gingerbread to the full release, root it and do a nandroid backup. Then, you follow the steps in the first post but instead of restoring the nandroid backup of CM7, you install the nandroid backup of regular gingerbread that you made yourself.
bveditz, thanks, that is along the lines of what i was thinking might work after reading the directions... Im already running tbh rooted gingerbread... Do i need to sbf and upgrade to a clean gingerbread, or can i nandroid backup what i already have and then retain all my settings and apps so i dont have to start over. Has anyone noticed any disadvantage to useing the older radio besides the obvious advantage of being able to use the band unlock?
Excellent tutorial!!
EXCELLENT TUTORIAL GUYS. Also, you should make sure to mention after installing bootstrap, press 'bootstrap recover'. then 'reboot recovery' option. I did that, installed the kernal and restored backup fine.
Only issue so far was a -20% battery decrease randomly. I had 100% with a brand new battery fully charged for the first time and when I finished installing cm7 I was already on 80%, then dropped to 70% on a reboot or two, its weird. Anyone else had this happen? I heard the apex 2.0 rom did it to someone else as well on another forum
Also, do you guys know how to get back the blur social network apps such as friendfeed, or whichever app it was that adds your friends social network updates to their contact numbers on your contacts? Most people don't like it, but I think its a pretty awesome built in feature
jxs714 said:
EXCELLENT TUTORIAL GUYS. Also, you should make sure to mention after installing bootstrap, press 'bootstrap recover'. then 'reboot recovery' option. I did that, installed the kernal and restored backup fine.
Only issue so far was a -20% battery decrease randomly. I had 100% with a brand new battery fully charged for the first time and when I finished installing cm7 I was already on 80%, then dropped to 70% on a reboot or two, its weird. Anyone else had this happen? I heard the apex 2.0 rom did it to someone else as well on another forum
Also, do you guys know how to get back the blur social network apps such as friendfeed, or whichever app it was that adds your friends social network updates to their contact numbers on your contacts? Most people don't like it, but I think its a pretty awesome built in feature
Click to expand...
Click to collapse
Thanks, made the note to the tutorial. I haven't noticed the issue with the battery, but I do know that this is one of those roms that seems to jump in increments of 10 for the battery which is kinda weird. That said, i only used it about a week on CM7 before switching over to the Apex rom (and haven't noticed that issue on the apex rom).
Don't know about blur, I didn't use the original OS at all. That said, you can do what the guy above did and wipe the phone, upgrade all the way to gingerbread, do a nandroid backup then follow the original instructions but use that backup to restore to, which should have the full motoblur functionality. Thats just a guess though, haven't tried it myself.
------------------
Could you re-up just the Kernel file? I've followed your instructions to the T and every time it seems that I have a problem at that step.
I've gotten to Flashing the Kernel VIA CWM, and when I try to restore the backup of CM7 via \clockworkmod\restore\ folder - it will say MD5 mismatch.
Also, if I skip the restore portion of CM7 and just try to reboot the phone after flashing the Kernel, I will be stuck at the red M.
I've tried rebooting the phone right after applying the band unlock (all after SBF + Wipe data), and the phone will boot up just fine if I skip flashing the Kernel (again I leave it in zip form and install it via CWM).
I’ve already unlock my SIM via code provided by VZW (I am a VZW customer in good standing)
While stuck at the red M, I’ve done a battery pull and tried to enter Recovery mode by pressing M+R+Power, and the recovery screen that is booted up doesn’t look like it’s compatible with the phone. I can almost describe it as a bunch of white horizontal lines of what the menu should be, and all the menus and the green android are skewed diagonally to the right/and also looks like it’s double or triple vision.
I know a very similar process works for the D2G, because I have successfully performed and tested it on the D2G on one of my other lines.
Any help is greatly appreciated. I can stick with Froyo, but I’d like to have GB.
Try redownloading the CM7 backup, it might be a corrupted download. If that doesn't work, try the APEX file. But, yes, you cannot reboot without restoring a gingerbread backup or you'll have to start over again (there's ways to get back to the cwm but i'm not sure how, I did it accidently a few times).
Thanks I am a complete noob
So it turns out the problem is when I unzipped the Backup that it created sub folders "\nandroid\restore\xxxx\xxx\backup\restore\"
Just to save everyone headaches, make sure the when you unzip the file into your backup folder that the name of the next folder down is the series of numbers that represent the name & number i.e.
Should NOT be
\clockworkmod\backup\clockworkmod\clockworkmod\backup\2011-11-27.09.52.03\
but instead SHOULD BE
\clockworkmod\backup\2011-11-27.09.52.03\
My 7zip by default created all those sub directories, which caused the CWM restore not to find the back up files.
On another note, I am having issues with GSM Wifi and 3G.
With a fresh flash & WiFI on - if I connect WIFI first I cannot later add the APN and access Cellular Data
Inversely, If I add the APN first (again after a fresh SBF flash, kernel update, and Backup restore), and connect to cellular data, none of the WIFI connects I make can access WIFI Data
I am going to try WIFI fixer in one of the older threads to see if this resolves the problem.
DROID PRO
Please upload the file in other downloads bc megaupload is temp down
agni said:
Please upload the file in other downloads bc megaupload is temp down
Click to expand...
Click to collapse
If you're talking about the two multiupload files I put up, use one of the other links below megaupload. I just tried the bottom one (wupload) and it worked. If you're talking about RSD Lite and SBF files, I'll see if I can find another link to them, but you can easily find them by searching the forums or google.
**Edit** Edited first post with non-megaupload links.
jraskal said:
On another note, I am having issues with GSM Wifi and 3G.
With a fresh flash & WiFI on - if I connect WIFI first I cannot later add the APN and access Cellular Data
Inversely, If I add the APN first (again after a fresh SBF flash, kernel update, and Backup restore), and connect to cellular data, none of the WIFI connects I make can access WIFI Data
I am going to try WIFI fixer in one of the older threads to see if this resolves the problem.
Click to expand...
Click to collapse
Let me know how that worked out. I stopped using CM7 and switched to Apex because of the Wifi/Cellular switching issues of the november cm7 rom.
bveditz said:
Let me know how that worked out. I stopped using CM7 and switched to Apex because of the Wifi/Cellular switching issues of the november cm7 rom.
Click to expand...
Click to collapse
Can you provide a link to the Apex rom you're using?
aaevann said:
Can you provide a link to the Apex rom you're using?
Click to expand...
Click to collapse
Theres an apex thread on xda that links to the rom http://forum.xda-developers.com/showthread.php?t=1292506
All right this problem has now been solved! Thank goes to khamsakamal48 for posting the solution for the problem. The problem is solved by replacing the updater-script with the one that is used in the GSM version the of Rom. Then Using the latest 4ext recovery, wipe everything and install. Thank you to everyone that have participated in trying to get this solved. This might also work with other recoveries, but has not yet been confirmed.
Updater-Script: http://db.tt/sUfk5p8E
Latest 4ext recovery: http://db.tt/sP5o7HhJ
only thing i could think of is try a different recovery .I haven't had any trouble at all booting miui an i use cwm touch version.
Alright I'll have to give it a try. Was trying to avoid that but oh well. Thanks!
Sent from my Incredible 2
so I tried 4ext and clockwork recovery. Both have caused my phone to just boot right back into recovery. Wiped data and all.
kylesag21 said:
so I tried 4ext and clockwork recovery. Both have caused my phone to just boot right back into recovery. Wiped data and all.
Click to expand...
Click to collapse
Can you give us a little more background on your phone setup? Have you flashed roms successfully before or is this a first time? Are you s-off?
Sorry bout that. I am S-off and I am able to flash all of the other roms available. But when it comes to this one it just won't flash.
Sent from my Incredible 2 using Tapatalk 2
I have been having this same problem. I am going to try to go through everything I have done to see if I can get more info.
I had MIUI V4 (2.9.29 CDMA) running shortly after rooting this phone (maybe 1 week ago). I installed it from the latest TWRP, so that isn't our problem. I loved it and everything was great. I am unsure what radio I was on at the time, and I think that may be where my problems came in.
I successfully installed ViperINC 1.0.0 after doing a factory reset, wiping cache, dalvik from my WORKING MIUI V4. It booted and I played with it for a few hours, but wanted to go back to MIUI. At this point I was on the firmware from nitsuj17's thread. When I tried to factory reset and install MIUI clean again I started having the same trouble as OP. Since then I have tried every radio I could get my hands on, and may have even been a bit sloppy about what firmware I flashed (the only one I'm unsure of is CondemnedSoul's Return to stock as I am unsure what all it included other than radio and stock rom). After a lot of different attempts, I used CondemnedSoul's PG32IMG and went back to stock where I had everything working fine (for stock). I got an OTA update, but wasn't satisfied so I kept trying different radios from the pinned post on the Development thread (really only .0312 and .0320 as well as the first leaked firmware I linked from nitsuj17). So far nothing has worked to get me any further than the OP unless I just use a different rom. Had this rom never worked I would just talk to the developer, but as I had it working before and no idea what changed I'm at a loss.
I don't have enough posts to get something on the Development forum, but if anyone here can help, I'd really appreciate it.
I've been scouring these forums looking for someone who has made progress on this issue. I'm going to make a list here of posts by people having similar problems, if not the exact same. I have yet to see anyone successfully address them.
One of a few people on the MIUI V4 thread who have had the same issue. I had this rom running at one point, though, so I'm not sure what change caused it to stop. I definitely get further with the TWRP recovery (freezes on "android" splash screen) than the 4ext recovery (reboots to recovery).
I don't believe the JB issues are directly related, but similar problems.
Similar to the Jellybean issue above. More similar to my own situation since I also only started having trouble after flashing ViperINC, but I have formatted, wiped and reverted (even to S-ON and unroot Froyo) so much that I can't see how it would have changed anything that I have not removed. This thread has 3+ people with the same sort of issues. Last report one of them installed ViperINC with all defaults and let it run for a few minutes then wiped and re-installed CM10 with success. I may try this, only with MIUI. I have no idea what settings would be slipping through.
And the cdma miui is one of the only roms that boots for me. Running it now. I think Zelmo is right, there's something sticking around with that Aroma script. I've flashed aosp roms over sense roms and vice versa without even wiping and never had issues like these. I've basically wiped this thing with steel wool and always the same thing. It's gone atleast 15 mins with it's bootloop/freezing max cpu process. It ain't gonna boot! I was up until 2am last night ****ing with it. I'm done.
I'm nearly there. Had I never been able to run MIUI, I would probably have dumped it by now, but it's like an itch I can't reach at this point. There is just something there that I can't see or imagine that is hanging in through every wipe I can find. I just formatted my SD card and did a bunch of wipes (I know that has been tried) and I'm going to try VenomINC with all defaults like Zelmo88 had some success with. If I don't have any luck getting to MIUI from there I'll probably go back to my dinc or buy a new phone soon. This one was really an experiment anyway.
Will follow up if I can figure out anything else.
khamsakamal48 posted pretty detailed instructions here. I have confirmed that my install is going pretty fast, so I am betting that could be our issue. I am not sure what causes this or how to prevent it. I'm going to try and flash it a bunch of times here to see if I can get it to complete.
Edit: I tried 3-4 times with CDMA file and had no success making it take longer than 1-2 minutes. I then flashed the GSM file which I had been having the same trouble with and it succeeded! I am going to check my MD5s again on the CDMA file and give it another go.
Edit: I have tried now around 10 times with the file found here linked from khamsakamal48's thread on the development forum. MD5 matches, but I cannot find any method of flashing>wiping>reflashing>rewiping>crying>flashing>snoring which will make it take more than about a minute with the "install". I'm going to type out my log from 4ext so that I have something to do.
>format all partitions (except sdcard)
>wipe dalvik cache ;multiply the repetetive redundancy
>install from sdcard
>MIUI.us_vivow_v4_2.9.29.zip ;MD5 9f36b433635e50e0daf23768280c050f
;begin log
Finding update package...
Opening update package...
Installing update...
Formatting system...
do not formate system ;???
Installing system files... ;this bit may take 1minute
Creating system links...
Set permission...
Update Boot image...
Install from sdcard complete. ;and done in less than 2 minutes every time.
If someone could post a link to this on the Dev forum or something I would appreciate it. I don't feel like spamming 4 more posts just so I have that privilege.
stoicwood said:
khamsakamal48 posted pretty detailed instructions here. I have confirmed that my install is going pretty fast, so I am betting that could be our issue. I am not sure what causes this or how to prevent it. I'm going to try and flash it a bunch of times here to see if I can get it to complete.
Edit: I tried 3-4 times with CDMA file and had no success making it take longer than 1-2 minutes. I then flashed the GSM file which I had been having the same trouble with and it succeeded! I am going to check my MD5s again on the CDMA file and give it another go.
Edit: I have tried now around 10 times with the file found here linked from khamsakamal48's thread on the development forum. MD5 matches, but I cannot find any method of flashing>wiping>reflashing>rewiping>crying>flashing>snoring which will make it take more than about a minute with the "install". I'm going to type out my log from 4ext so that I have something to do.
>format all partitions (except sdcard)
>wipe dalvik cache ;multiply the repetetive redundancy
>install from sdcard
>MIUI.us_vivow_v4_2.9.29.zip ;MD5 9f36b433635e50e0daf23768280c050f
;begin log
Finding update package...
Opening update package...
Installing update...
Formatting system...
do not formate system ;???
Installing system files... ;this bit may take 1minute
Creating system links...
Set permission...
Update Boot image...
Install from sdcard complete. ;and done in less than 2 minutes every time.
If someone could post a link to this on the Dev forum or something I would appreciate it. I don't feel like spamming 4 more posts just so I have that privilege.
Click to expand...
Click to collapse
Your post is an exact match to what I've done. Even tried reverting to ext3 ( no luck, obviously). Well I've got the bug so now I'm not stopping until I figure this out. I'm running viper 1.0.1 so there might be a common element.
grunt9800 said:
Your post is an exact match to what I've done. Even tried reverting to ext3 ( no luck, obviously). Well I've got the bug so now I'm not stopping until I figure this out. I'm running viper 1.0.1 so there might be a common element.
Click to expand...
Click to collapse
I think most of us first noticed these problems around the time we flashed Viper, but I have nuked this thing so hard from so many different directions since the last time I ran Viper that I can't imagine anything surviving. Still, a little too coincidental.
Running the GSM version didn't last long, either. I played around with trying to get it to use my sim, but as soon as I changed some of my network settings it went into a bootloop tailspin and somewhere along the way corrupted my /system. That took a little work to get around, so now I'm back to aeroevan's CM10 which runs OK... other than what doesn't.
Try replacing the updater-script under meta-inf with one from my GSM version!!
Hope that helps!!
Edit: Replace the updater-script with this one- http://db.tt/sUfk5p8E & use this recovery which I downloaded just now- http://db.tt/sP5o7HhJ
All the best!!
Sent from my HTC Incredible 2 using xda app-developers app
[SOLVED]
khamsakamal48 said:
Try replacing the updater-script under meta-inf with one from my GSM version!!
Hope that helps!!
Edit: Replace the updater-script with this one- http://db.tt/sUfk5p8E & use this recovery which I downloaded just now- http://db.tt/sP5o7HhJ
All the best!!
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Worked perfectly first try! Now running CDMA version without problem. I don't know why it works, but it works. Everyone thank khamsakamal48!
I'm not seeing a meta-inf folder. Is there another place it could be?
Sent from my vivow using xda premium
I believe it is in meta-inf>com>google>android
Updater-script should be located there.
Sent from my HTC Incredible 2 using Tapatalk 2
Nope, no meta-inf. Back to Google
Sent from my vivow using xda premium
Are you using 7zip to open up the zip file?
Sent from my HTC Incredible 2 using Tapatalk 2
I'm too embarrassed to tell you what I was trying got it now, thanks again
Sent from my vivow using xda premium