[Q] [ROM] Synergy - [RLS1+GodMode 08/05/2011] - Now With Warm Sprinkles - EVO 4G Q&A, Help & Troubleshooting

I am trying to flash [ROM] Synergy - [RLS1] - the first time it got stuck in the HTC load screen, so i re-downloaded it and tryed again now it got to the synergy rom load screen and it is stuck on that one now. what can i do to get this rom working please help

I have also tried rebooting three times, done battery pulls. i have done everything the same way i did everyother rom i have flashed and this is the only one i have had any problems with.

We need some additional information to help you guys with this. Are you using RSL1 godmode or non-godmode? Are you using RA, CWR, or TWR? do you have an sd-ext partition setup?
If you are trying to flash RLS1 godmode you must use RA. Last I checked CWR was not compatible and I am not sure of TWR.
Here are the procedures I use in RA.
Wipe -> cache, system, data, sd-ext, dalvik. Then flash and reboot. It has worked for me every time. I know some ROM automatically format system and maybe data, but I do it manually before flashing anyhow.
Hope this helps. Let me know if you need anything else.

im using RSL1 non-godmode. Sorry im not sure what RA, CWR, or TWR are.and i dont know how to do a sd-ext partition setup. all that is new to me for flashing sorry.

I have done what you said you did as far as the wiping everything but it just gets stuck on eather the HTC boot screen or the synergy boot screen

IrishAce777 said:
I have done what you said you did as far as the wiping everything but it just gets stuck on eather the HTC boot screen or the synergy boot screen
Click to expand...
Click to collapse
i put on godmode and i thought it was stuck on the synergy bootscreen but it just took a LONG time to boot up after the install i just left it there and walked away when i came back it was booted

Related

Cannot boot my phone

My phone won't boot more than 3 seconds into the animation. I use CM6.0 stable. I had flashed the PS3Freedom zip in order to Jailbreak my PS3, restored to CM6 with no problem, and then when I did it again I couldn't boot into my RESTORED CM6 ROM. I restored few old nandroids that I didn't like till I got to my rooted Sense 2.2 one, then I deleted a few nandroids from when I was flashing nightlies to make room to download BakedSnacks 1.7 through ROM Manager. Everything was working fine, but then I tried to get CM6 running again and I am still not able to boot into it. What's going on here?
To the best of my knowledge I've been wiping the Data/Cache as often as necessary, even the Dalvik Cache a few separate times trying to get this to work.
blakerboy777 said:
My phone won't boot more than 3 seconds into the animation. I use CM6.0 stable. I had flashed the PS3Freedom zip in order to Jailbreak my PS3, restored to CM6 with no problem, and then when I did it again I couldn't boot into my RESTORED CM6 ROM. I restored few old nandroids that I didn't like till I got to my rooted Sense 2.2 one, then I deleted a few nandroids from when I was flashing nightlies to make room to download BakedSnacks 1.7 through ROM Manager. Everything was working fine, but then I tried to get CM6 running again and I am still not able to boot into it. What's going on here?
To the best of my knowledge I've been wiping the Data/Cache as often as necessary, even the Dalvik Cache a few separate times trying to get this to work.
Click to expand...
Click to collapse
what recovery are you using?
in clock work, try wiping to factory, wipe cache partition, wipe datavik then flash from zip to whatever rom.
in RA do the same but make sure your rom is on the root of your sd.
i had the same issue and did that and it worked fine.

Evo stuck on boot animation screen - CM7

I just flashed a fresh cm7 rc4, along with gapps, and zendroid kernel (avs i think i'm not sure which one).
Things were working great. I was using the phone, had just installed widget locker, and then tried to plug my phone into the computer.
Thats when the trouble started. For some reason, usb debugging worked, even the wireless tether worked, but I could not get the sd card to be on the computer, the option just never came up.
To fix the problem, I tried resetting the phone, but when I did so the phone became stufk on the cm7 boot animation for a few hours. What do I do?
I would just do a fresh install, but this is actually the third time that I have gotten stuck on the bootloading screen with cm7, so I just need to find a solution. Please help.
-AJ
Really need some help with this, guys...need my phone back
You're not alone. I installed GApps along with CM7. Stuck in Boot animation. My wife is pissed.
You posted in the wrong section. I will transfer this over to the EVO Q&A area.
I am assuming that you have your EVO rooted. If you are stuck in a bootloop, simply pull your battery, put it back in and press the power button while holding Vol Down. This will make you go into bootloader. From there, simply go into recovery, wipe everything, and reflash the rom. I have done CM7 and gapps and have no issue.
egzthunder1 said:
You posted in the wrong section. I will transfer this over to the EVO Q&A area.
I am assuming that you have your EVO rooted. If you are stuck in a bootloop, simply pull your battery, put it back in and press the power button while holding Vol Down. This will make you go into bootloader. From there, simply go into recovery, wipe everything, and reflash the rom. I have done CM7 and gapps and have no issue.
Click to expand...
Click to collapse
I did that, many times. One time, it just worked. Didn't do anything different as far as I know, but kind of makes me unsure about future flashes etc.
Pull your battery out, wipe data, cache, and dalvik cache in recovery. Flash ONLY CM7 and the google apps. I think the kernel might be the problem for the bootloop.
harryprk2x said:
Pull your battery out, wipe data, cache, and dalvik cache in recovery. Flash ONLY CM7 and the google apps. I think the kernel might be the problem for the bootloop.
Click to expand...
Click to collapse
I never wipe any of those things seperately, I just use calkulin's format all. That couldn't be the source of any problems right?? I mean, I always believed that that was the best way.
Thanks. I ended up doing that. All is better now.
Sent from my rooted Thunderbolt with VirusROM AirborneTB. Xda premium
My problem was installing both at the same time.
Sent from my rooted Thunderbolt with VirusROM AirborneTB. Xda premium
thenimboo said:
I never wipe any of those things seperately, I just use calkulin's format all. That couldn't be the source of any problems right?? I mean, I always believed that that was the best way.
Click to expand...
Click to collapse
I've used Caulkin's format all twice, and both times, I got stuck in the white screen boot loop and had to reflash Amon Ra, just to get back to recovery and flash one of my nandroids.
Wiping everything in recovery works perfectly fine for me.
I use Calk's format all at least a few times a week, sometimes a couple times a day. Always works fine.
Did you wipe?
Did you wipe the data/cache from the handset? if not do so through clockwork

[Q] Helpppp SNS Gingerbread v1.7,OTA 4.53 Sense

I flashed SNS Gingerbread v1.7,OTA 4.53 Sense to my EVO and the ROM won't start. The phone has been sitting for 2 hours. I only see the black screen with android then somtimes the white htc screen will pop up but the ROM won't start. How long should it take.
Help is appreciated.
rford78 said:
I flashed SNS Gingerbread v1.7,OTA 4.53 Sense to my EVO and the ROM won't start. The phone has been sitting for 2 hours. I only see the black screen with android then somtimes the white htc screen will pop up but the ROM won't start. How long should it take.
Help is appreciated.
Click to expand...
Click to collapse
have you tried clearing cache in recovery?
if that doesn't work, i would do a wipe and reflash the rom.
I run that ROM with no problems. Try wiping everything (cache data dalvik), and then reflashing the ROM. It's always going to take a little longer to start up the first time, like 5 minutes, but should be faster from there.
Im a little new so thank you for the patience, here is a quick order of how i was taught to flash
wipe data/factory reset twice
wipe cache partition twice
go to advance
wipe dalvik cache twice
wipe battery stats twice
install zip from sd card
choose zip from sd card
then select the rom,
after that the screen has the black background and android then flashs the white background htc,
any corrections you advise are appreciated
Are you using Clockwork or Amon Ra?
If Amon Ra, which I suggest you use, Wipe everything, except SDCard: (And Battery Stats if not fully charged). Everything else gets wiped.
Then flash the ROM and reboot.
Im useing Clockwork, will give it a third try
This time the evo loaded Kings Alliance (which i pulled from backup, previously today)
AKWARD??
Where did you get the ROM from? Possibly a bad zip file. Check the Dev section and download it from there. Then reflash and see how that works.
It probaly was a bad file i flashed a new one so now im working on overclocking thanks everyone

[Q] boot loop

I flashed CM7.1 and I'm stuck in a boot loop. I tried wipe cache partition, wipe date/factory reset, wiping dalvik cache and reflashing a different rom but still keep getting the boot loop. What else should I try doing to slove this ?
Could be kernel related, are you using an aosp and hopefully not a sense kernel? Need more info, what kernel, recovery are you using?
I'm using ClockworkMod recovery I'm not sure what kernel I using
Easy fix, recommend starting from new. wipe the entire phone in recovery at least 3 times, sd card also, backup sd card to computer if you need to via USb toggle, flash Cm 7.1, flash tiamat kernel, found in development section, reboot, good to go, nandroid once up and running, happy flashing
Thanks, okay I'm glad you said easy fix I'm not as worried now. I'm gonna follow your advice. Whats a roamer kernel ?
sorry swype acting weird, use tiamat kernel 4.1 something in development section
The FIRST Thing you should do is get rid of Clockwork Mod, and get Amon Ra, so you can wipe everything.
Just wiping Data/Cache/Dalvik when flashing a new ROM isn't enough.
Hey thanks again ! ! I followed your advice and got everything working again

Roms arent being flashed

So, im having a problem now. I used boot manager then i installed a cm7 nightly, i restarted and went back to deck ics 5, then everything was fine so i rebooted. it was looping. so i wiped everything and i just decided to install deck ics 6 and it reboots and goes to the recovery, Im stuck and I need some help, after the flash and it goes to recovery, i checked the usb mode toggle and theres nothing there, so im guessing its not installing at all
Just do it the normal way. Wipe everything in recovery (With Amon Ra) as has been detailed a billion times on here, then flash the ROM you want
^ Yeah I agree with that person. I was using CWM until yesterday when it wasn't wiping the Dalvik cache properly. I now use the alternative that he said, use it lol

Categories

Resources