Do it yourself.
Enjoy. See Ya.
Any chance could we get file size? Just downloaded it but want to double check file size and MD5
Fate0n3 said:
Any chance could we get file size? Just downloaded it but want to double check file size and MD5
Click to expand...
Click to collapse
215.1mb
funny story, no idea on how to do an MD5. *hides in corner*
Its been up for awhile now, its probably good to go.
Thanks. I've been borrowing a Tab from a friend, and wanted to give it back with GB. I'd use your ROM instead, but he is getting it back tomorrow, so he'll take this one
To install, just follow the Heimdall instructions for your version? Want to make sure before i brick it
gunslingerfyre said:
Thanks. I've been borrowing a Tab from a friend, and wanted to give it back with GB. I'd use your ROM instead, but he is getting it back tomorrow, so he'll take this one
To install, just follow the Heimdall instructions for your version? Want to make sure before i brick it
Click to expand...
Click to collapse
Yeah follow directions.
Its always good to do a full wipe in recovery prior to expecting it to actually work.....better safe than sorry.....
oldmacnut said:
215.1mb
funny story, no idea on how to do an MD5. *hides in corner*
Its been up for awhile now, its probably good to go.
Click to expand...
Click to collapse
for any file you in linux you can get a md5 by:
Code:
md5sum filename.zip
also just so ya know when making an odin compatible tar you would do it this way:
Code:
md5sum -t filename.tar >> filename.tar
mv filename.tar filename.tar.md5
Thanks for this
İs this a gsm rom?
Sent from my GT-P1000 using XDA Premium App
cdma
ggursel said:
İs this a gsm rom?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SHW-M180L using XDA App
Link is down :-(
[#10869] You do not have access to this section of the site.
Oditius said:
[#10869] You do not have access to this section of the site.
Click to expand...
Click to collapse
That's because you need to register and be a member.
Thanks, I just want to restore my tab. Camera doesn't work thanks to the Verizon Tab bootstrapper. Personally I rather have my tab restored to original condition.
So why not just register and download and flash? I just tried the link and it's working fine.
I did, and downloading... Thanks a million...
I have registered and Im getting the same error.
I had to close the browser, and then open it. Did you get the email? It will let you logon first, but not go there till you click on the link in the email to verify your address..
Verizon Bootstrapper doesn't work with this as of yet. :-(
I hope I can get a recovery on it....
ripjaw27 said:
Verizon Bootstrapper doesn't work with this as of yet. :-(
I hope I can get a recovery on it....
Click to expand...
Click to collapse
I've been pretty silent in regards to people asking if boush's voodoo kernel will work, or if the bootstrapped will work, until now.
I'm not trying to come off as a **** right now, but come on.
This is gingerbread, the bootstrapper is for froyo, kernels are different.
I have a kernel+recovery, if you need 3g, stick with stock kernel for now, if you use the tab for wifi only, then my kernel + recovery is perfect for you.
If I may, I suggest people read threads, read instructions, follow instructions, and fully understand what they are doing before they flash a device, as it always comes back onto the devs as our fault. If people do not read the title, read every word of a post, then it is not our fault if the end user is impatient and flashes the wrong thing.
I am 1 person working on 4 builds for the sprint and Verizon tablet, 2 builds per tab, plus working on the kernel and recovery. If you can not read all my updates in the active Verizon better than life gingerbread thread, then you end up wasting your time, and mine as I have to reply to the pm, email, or thread asking for help bailing out of a brick, and in that I lose dev time.
Boush doesn't come to xda anymore, his threads should be closed and considered abandonedware, it only creates confusion when it comes to the new people.
Sorry if I came off harsh, but its true. Dan and I are currently the only cdma devs now, time for people to fully read our detailed instructions.
Jim
Sent from my SCH-I800 using XDA App
Well said. Thanks for your work.
Related
Well recently I wanted to COMPLETELY redo my XOOM in anticipation of the Jelly Bean update. I've been around Android for awhile now so it was something I'm accustomed to doing and I didn't think it would be a problem. To make a long story short, I did have a big problem and realized there wasn't really one easy, simple, automated way (with comprehensive instructions) to get a XOOM back to its factory state. I tried to solve this a little bit by making a ZIP package to return a XOOM to stock.
Here's a quick rundown:
-ONLY works for wingray (US XOOM WiFi-only/MZ604)
-Works coming from any ROM, etc. as long as your bootloader is unlocked
-Flashes the original factory software that the XOOM ran (yes that's right, Honeycomb)
-Works on Windows or Linux
-Will relock your bootloader and therefore wipe your data - this gets you COMPLETELY back to stock, folks!
There is a more comprehensive list of information and step-by-step instructions in a readme file found within the ZIP (named README.txt). READ IT before doing anything!
Once you do this it will only take 15-20 minutes to run through all the OTAs if you're looking to upgrade to the latest stock ROM. Hope this helps some people out!
DOWNLOAD HERE: http://www.mediafire.com/?etw97xdi5x1fhf2
Forgot to mention, thanks to Motorola for providing the stock images and Google for the fastboot software!
If you guys have questions, comments, requests, etc. feel free to post them of course!
Thank you very much for posting it! I am about to sell my Xoom and wanted to deliver it stock.
I was just wondering if anyone has tested it as well.
Thanks again!!
I always backup boot and system right after an OTA (need to flash CWM recovery first) - and before applying root.
Prior to taking a subsequent OTA, restore those partitions and let it fully boot - this will overwrite recovery to stock.
Sent from my Xoom using XDA Premium HD app
Thanks!
In order to get it working I had to reorder the flashing of system and recovery (system first, then recovery), else I got an error.
Flashed it on my Mac by the way. The shell script didn't work out of the box for some reason, but executing the commands in the file with the "./" part skipped and the mentioned reordering it worked flawlessly.
Going to try this later.
Sent from my Xoom using Xparent Cyan Tapatalk 2
i have done all the steps.. but the least i have push down volume and i don't know i have lock my bootloader or not.. can anybody help me? i think i have unlocked yet!
Any chance...
.. Hi, any chance you still have this file? I've been trying to put my Xoom back to stock version to sell on, but have been unable to find the needed files.
Thanks (hopefully)
For MZ601
For owner of Xoom MZ601 Umts Everest to return in one shoot to original stock ICS 4.0.4.
Download this tool: https://www.dropbox.com/s/qrazfho7p4oz4an/RSDLite 5.4.4.rar?dl=0
Download this ROM stock untouched: https://www.dropbox.com/s/8jr8zgiuc...FR_P025_A021_M007_HWumts_everest_1FF.rar?dl=0
Install RDS on your Desktop, start in administrator.
Start you tab with power + volum up. connect with the USB cable
Unzip the ROM to obtain the .sbf file
search the place of the .sbf file downloaded with RDS
push Start to flash the TAB and after few minutes you are in original last update I.C.S 4.0.4
Work coming from any ROM and any type of partition Normal or Big.
Anyone have this file for the Wingray
Sent from my Xoom using XDA Premium HD app
dkahs23 said:
Anyone have this file for the Wingray
Sent from my Xoom using XDA Premium HD app
Click to expand...
Click to collapse
You can try this. I believe it's the original Honeycomb that came with the Xoom when it was first released. I say I believe it is because it's been a long time since I've been on stock and I'm not really sure if this is ICS or Honeycomb.But, I did a bit of searching though before posting this and from what I can find, the wifi only version of the Xoom was released in Feb of 2011. If you drill down through the zip and check the properties of the files, you'll see the date modified is March 10, 2011. So, I have to assume it's Honeycomb. If you want to give it a try, I uploaded it to my dropbox. Here's a link to the file. https://dl.dropboxusercontent.com/u/67672751/MZ604_HWI69.zip
Sorry I can't be sure on this but it's been a long time since I downloaded it. I have things organized pretty good though and it's definitely for the wifi only xoom. I can tell you that.
hello can anyone can upload the everest stock version? thank you!!!
haldaios said:
hello can anyone can upload the everest stock version? thank you!!!
Click to expand...
Click to collapse
There appears to be a Wingray version in post #10. Do you need cellular capability? If not the Wingray version may work for you.
brewer75 said:
There appears to be a Wingray version in post #10. Do you need cellular capability? If not the Wingray version may work for you.
Click to expand...
Click to collapse
its ok I find it through an older post my version!! thank you for replying!!
OP's file missing
Can someone upload OP's original attachment? Mediafire seems to have taken it down.
OK
johneflik said:
You want everest European or international or USA or Korean... Be specific then chose the server you want me to upload on it
Click to expand...
Click to collapse
it doesn't matter anymore, I appear to have screwed the pooch on my Xoom. It won't wipe partitions or let me load the system partitions back on. Thanks for the offer though.
johneflik said:
You want everest European or international or USA or Korean... Be specific then chose the server you want me to upload on it
Click to expand...
Click to collapse
I want the everest version!
Sent from my SM-G920F using XDA-Developers mobile app
OK
johneflik said:
Ok here is everest but chose the version you need
International
https://drive.google.com/file/d/0ByGtxlrI5GAoOTgwdE5HSWZTcGM/view
Europe
https://drive.google.com/file/d/0B5-sw2BpNffdNm4tdU9fcHFPbUE/view
Korea
https://drive.google.com/file/d/0ByGtxlrI5GAoemhiQkNmQU9jODg/view
Good luck ... if you find difficults in downloading i might upload the one you like on other server
By the way have sold my xoom
Click to expand...
Click to collapse
Download requires permission. Please give adequate permission for download.
OK
Hi guys,
I was trying to download the att GS3 stock ROM from official Samsung's website. However there are too many choices there whihc has left me a little confused. Anyone know which is the option I should chose? I've attached a screenshot of the page.
Thanks.
pwned101 said:
Hi guys,
I was trying to download the att GS3 stock ROM from official Samsung's website. However there are too many choices there whihc has left me a little confused. Anyone know which is the option I should chose? I've attached a screenshot of the page.
Thanks.
Click to expand...
Click to collapse
Just use this thread. http://forum.xda-developers.com/showthread.php?t=1737848
The LG1 rom is the latest for AT&T G3. The second one in the thread is stock from initial release I believe. Download and flash. Since it's stock, it won't bump your counter. Will lose root though.
reaganSMASH said:
Just use this thread. http://forum.xda-developers.com/showthread.php?t=1737848
The LG1 rom is the latest for AT&T G3. The second one in the thread is stock from initial release I believe. Download and flash. Since it's stock, it won't bump your counter. Will lose root though.
Click to expand...
Click to collapse
Ya I saw that thread before posting here. But the links are from samsung-updates.com. I was thinking I'll download it from the official site thats all. I guess you dont have the answer then?
pwned101 said:
Ya I saw that thread before posting here. But the links are from samsung-updates.com. I was thinking I'll download it from the official site thats all. I guess you dont have the answer then?
Click to expand...
Click to collapse
Uuuh, those roms are straight from Samsung Kies (their official roms). They are safe. I have used it to ditch root and go back to my stock kernel prior to flashing new custom roms. They are official roms from Samsung. If you want to get them from Samsung directly, install more bloatware on your pc (Kies). Have fun.
I really don't care about a few apps being there (even if I don't use it).. So are u saying that if I install either one of the three (in the green box in the picture) I should be fine? Do u happen to know why they have different numbers in them?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pwned101 said:
I really don't care about a few apps being there (even if I don't use it).. So are u saying that if I install either one of the three (in the green box in the picture) I should be fine? Do u happen to know why they have different numbers in them?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Nope. I got my stock roms from the thread I sent you. Use the thread. Like I said, they are official roms straight from Samsung. It wouldn't be a main sticky on the development forum if it wasn't legit. Or you can just download Kies from the Samsung.com website and use that to flash newer stock roms to your phone. Or you can pull your hair out wondering which one to use until someone who knows their serial scheme to answer it better than I can.. The choice is yours. Chances are, anyone else would just link to that same thread I sent you already anyway. I've used them and they are just fine. I keep the latest stock on my ext_sd for backup just in case, which I downloaded from that thread. Works like a charm every time I have flashed it to go back to stock.
If you are already rooted and just trying to get back to stock to take your phone back for warranty, I also suggest you look into the app Triangle Away. Just do a forum search, it's in the development section. It resets your flash counter to zero. You will want to do that *before* you unroot. Assuming you've already rooted. Since I don't know your situation, I can only offer some suggestions. Hope this all helped.
Hehe.. Thanx for replying so elaborately. I have indeed tried the ROM posted on the thread earlier to go back to stock from CM10. They do wrk fine indeed. I just thought I'd get it from the official Site. That's all. I'm a little new to this but not a uber noob
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pwned101 said:
Hehe.. Thanx for replying so elaborately. I have indeed tried the ROM posted on the thread earlier to go back to stock from CM10. They do wrk fine indeed. I just thought I'd get it from the official Site. That's all. I'm a little new to this but not a uber noob
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
No worries, everyone here was new to Android and flashing at some point as well. I completely understand you wanting to make sure what you are about to flash to your $500 phone is clean and safe. I have used the roms linked from that thread from the samsung-updates.com website myself with no problems. Anyone else here on XDA will tell you the same thing, they are safe and straight from Samsung Kies.
Question .
I downloaded one of the original stock rom from the link , currently I'm rooted but if i wanted to go back to stock how would I do it?
Flash the file i just downloaded ? How with CWM? Odin? this part is what's confusing me.
Thanks if anyone can explain , I guess I mainly want to know how to go back to stock and how to unroot.
1st Download the Triangle away app and reset ur flash counter if it's not zero already.
2nd Put ur phone in download mode(volume down+home+power button) and use Odin to flash the Stock ROM from your computer.
3rd This should have removed all root from your phone. But do go into settings-> About device->Status->Device status(in ur phone) . If it still shows 'modified', goto recovery menu(volume up+home+power button) and do a factory wipe.
Ur good to go after that.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
make sure you flash stock kernel or else you get boot loop....
whit3gh0szt said:
make sure you flash stock kernel or else you get boot loop....
Click to expand...
Click to collapse
I thought when u flashed Stock ROM with Odin, it flashes the kernel and modem too? At least when u flash it with mobile Odin it happens by default.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pwned101 said:
Hi guys,
I was trying to download the att GS3 stock ROM from official Samsung's website. However there are too many choices there whihc has left me a little confused. Anyone know which is the option I should chose? I've attached a screenshot of the page.
Thanks.
Click to expand...
Click to collapse
go to your phone settings "About device" the information you require should be here
pwned101 said:
I thought when u flashed Stock ROM with Odin, it flashes the kernel and modem too? At least when u flash it with mobile Odin it happens by default.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Last time i used it, it does. System, modem, kernel, bootloaders, cache, everything.
icedragon24 said:
go to your phone settings "About device" the information you require should be here
Click to expand...
Click to collapse
I did check the 'about device' to see if there is anything that'll help me narrow it down(before you even replied). Yes, it helped me narrow it down to the green box in the picture.
Before you type some random **** like this why dont you check it out on your phone and give a reply. Let me know if you find out anything useful.
At the risk of sounding like an ass, did you look under the battery?
pwned101 said:
I did check the 'about device' to see if there is anything that'll help me narrow it down(before you even replied). Yes, it helped me narrow it down to the green box in the picture.
Before you type some random **** like this why dont you check it out on your phone and give a reply. Let me know if you find out anything useful.
Click to expand...
Click to collapse
watch what you say around here! we mods are all around here.
mrhaley30705 said:
At the risk of sounding like an ass, did you look under the battery?
Click to expand...
Click to collapse
yes i did check under the battery. All it says is SGH-i747.
Only thing left i can think to do would be to call the number listed for further assistance
Edit
Look under your battery again. Notice under the imei barcode. You see 2 letters there? Mine was mb. That might have something to do with it. Might not.
mrhaley30705 said:
Only thing left i can think to do would be to call the number listed for further assistance
Edit
Look under your battery again. Notice under the imei barcode. You see 2 letters there? Mine was mb. That might have something to do with it. Might not.
Click to expand...
Click to collapse
Wow..good catch. I thinks that's it. Its just two letters printed just like that not part of anything else. Mine is RW. Dont know what the difference b/w them are though. Thanks again. :good:
Update:
Called them up. Its all the same...the MB,RW and ZR refers to the different colors.
MB refers to Pebble blue
RW refers to Marble White
and ZR refers to Garnet red.
has anyone here been able to unlock a pin locked screen? I changed my pin and forgot it. I own this Sprint galaxy S3, i can verify that with a sprint rep and account. How can I unlock the screen without a hard reset?
No, I dont get the option to enter my gmail account to unlock.
thanks,
jc
http://forum.xda-developers.com/showthread.php?t=2179721
May take a couple tries, so set aside a good amount of time to unlock it.
CNexus said:
http://forum.xda-developers.com/showthread.php?t=2179721
May take a couple tries, so set aside a good amount of time to unlock it.
Click to expand...
Click to collapse
tried it, over 40 times, not luck. is there any other way?
one youtube video shows using a site calld FGM service and for a fee, if you give them your IME number they will unlock the phone. Anyone here tried this before or know about this service?
I would not give any info to anyone, if it were me. As for other ways, I dont know of any but the method in the link above worked for me when I tested it on my sisters S3
Just throwing this out there no idea if it will work but I'm guessing it would if worse comes to worse. Flash the a stock or rooted tar in Odin from freeza.
Sent from my Nexus 7 using Tapatalk 2
That true. OP, go into recovery, and make a backup
Then ODIN to stock rooted and restore your data...should work
CNexus said:
That true. OP, go into recovery, and make a backup
Then ODIN to stock rooted and restore your data...should work
Click to expand...
Click to collapse
Thanks for the help but I'm a noob, this is my first smart phone. Are there any write ups or links to how to do recovery/backup, ODIN, restore?
backinblack00 said:
Thanks for the help but I'm a noob, this is my first smart phone. Are there any write ups or links to how to do recovery/backup, ODIN, restore?
Click to expand...
Click to collapse
You're in luck, my friend. Our mighty qbking77 has created a set of videos with just what you need in his thread over here. They are easy to follow. The main thread on how to root is here. Just watch and read all you can before starting, and make sure not to use international ROMs on your Sprint phone (this causes a hard-brick and many facepalms here on XDA)
topherk said:
You're in luck, my friend. Our mighty qbking77 has created a set of videos with just what you need in his thread over here. They are easy to follow. The main thread on how to root is here. Just watch and read all you can before starting, and make sure not to use international ROMs on your Sprint phone (this causes a hard-brick and many facepalms here on XDA)
Click to expand...
Click to collapse
awesome! I'll give that a try. Thank you.
topherk said:
You're in luck, my friend. Our mighty qbking77 has created a set of videos with just what you need in his thread over here. They are easy to follow. The main thread on how to root is here. Just watch and read all you can before starting, and make sure not to use international ROMs on your Sprint phone (this causes a hard-brick and many facepalms here on XDA)
Click to expand...
Click to collapse
Yeah, dont flash international ROMs or any mods/flashable zips you find outside the Sprint forums
Sent from my PG06100 using xda premium
CNexus said:
That true. OP, go into recovery, and make a backup
Then ODIN to stock rooted and restore your data...should work
Click to expand...
Click to collapse
thanks for the help so far but just tried and got stuck again.
Question, I got into the "Android system recovery <3e>" menu and the back-up option is not listed.....
Is there another way to back-up? or am I out of luck and have to do a hard reset from same menu?
You can root it through ODIN (in download mode) and then flash a recovery
Is there anything out on rooting this device yet? Im in the V.A. HOSPITAL in West Palm Beach Fl. right now for the last 2 months w "M.R.S.A." so, i cant post the devices needed firmware for ChainFires auto rooting process. Can someone please help post what ChainFire needs on this post so we can root this device? Sprint SM-T807P. Thanks!
VenomousViper said:
Is there anything out on rooting this device yet? Im in the V.A. HOSPITAL in West Palm Beach Fl. right now for the last 2 months w "M.R.S.A." so, i cant post the devices needed firmware for ChainFires auto rooting process. Can someone please help post what ChainFire needs on this post so we can root this device? Sprint SM-T807P. Thanks!
Click to expand...
Click to collapse
We can't get it until samsung releases firmware. There are quite a few threads on this already. I am waiting for it also. Just keep checking back we will get it sooner or later.
Sent from my SPH-L720 using Xparent Blue Tapatalk 2
VenomousViper said:
Is there anything out on rooting this device yet? Im in the V.A. HOSPITAL in West Palm Beach Fl. right now for the last 2 months w "M.R.S.A." so, i cant post the devices needed firmware for ChainFires auto rooting process. Can someone please help post what ChainFire needs on this post so we can root this device? Sprint SM-T807P. Thanks!
Click to expand...
Click to collapse
just want to say hope you get better soon...wish you the best.
why do you say it is snapdragon ? on all website i found exynos, on samsung website i saw exynos ?
http://www.cdw.com/shop/products/Sa...id-4.4-KitKat-16-GB-10.5in-3G/3493309.aspx#TS
Anyone?
androidrouen said:
why do you say it is snapdragon ? on all website i found exynos, on samsung website i saw exynos ?
http://www.cdw.com/shop/products/Sa...id-4.4-KitKat-16-GB-10.5in-3G/3493309.aspx#TS
Click to expand...
Click to collapse
Sprint uses snapdragon 800 if im not mistaken
mac231us said:
just want to say hope you get better soon...wish you the best.
Click to expand...
Click to collapse
Thank you!
bcombel said:
We can't get it until samsung releases firmware. There are quite a few threads on this already. I am waiting for it also. Just keep checking back we will get it sooner or later.
Sent from my SPH-L720 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Yeah i was wondering about that! I couldn't find anything when i ran a search
wondering the same about verizon t807v
Yeah sprint and Verizon version uses snapdragon. Yeah unfortunately we have to wait for the firmware to get posted. I check faithfully so keep checking back.
Sent from my SPH-L720 using Xparent Blue Tapatalk 2
bcombel said:
Yeah sprint and Verizon version uses snapdragon. Yeah unfortunately we have to wait for the firmware to get posted. I check faithfully so keep checking back.
Sent from my SPH-L720 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Have you found the firmware for this device or has it still not been posted yet? Also, where can I look for it at? I'm assuming it is a website that has all of the firmwares listed for every Samsung device. Unfortunately, i cant remember the name at the moment and Ill kick myself when you say it or if someone else posts it, for not remembering something so often i used to go to. However, I was in the hospital for a couple months for M.R.S.A. and that sucked. Im finally out of there but 2 months out of the loop with this field is like several years missing information in the technology world! So, what site was this posted on again?
VenomousViper said:
Have you found the firmware for this device or has it still not been posted yet? Also, where can I look for it at? I'm assuming it is a website that has all of the firmwares listed for every Samsung device. Unfortunately, i cant remember the name at the moment and Ill kick myself when you say it or if someone else posts it, for not remembering something so often i used to go to. However, I was in the hospital for a couple months for M.R.S.A. and that sucked. Im finally out of there but 2 months out of the loop with this field is like several years missing information in the technology world! So, what site was this posted on again?
Click to expand...
Click to collapse
*kicks self* SAMMOBLE is the website lol!
Is there STILL no firmware out for this yet?
VenomousViper said:
Is there STILL no firmware out for this yet?
Click to expand...
Click to collapse
Oh its out. We just need someone to upload the firmware to a fast site and port cfautoroot
DUHAsianSKILLZ said:
Oh its out. We just need someone to upload the firmware to a fast site and port cfautoroot
Click to expand...
Click to collapse
I didn't see it on the sammobile site. Where's it posted at?
VenomousViper said:
I didn't see it on the sammobile site. Where's it posted at?
Click to expand...
Click to collapse
Google samsung updates. It should be there. Thats how I got the Tmobile firmware.
VenomousViper said:
I didn't see it on the sammobile site. Where's it posted at?
Click to expand...
Click to collapse
DUHAsianSKILLZ said:
Oh its out. We just need someone to upload the firmware to a fast site and port cfautoroot
Click to expand...
Click to collapse
so where is it? lol idk where it is bc i haven't yet seen it on SamMobiles site. when i enter the nomenclature it doesn't come up with any files for SM-T807P ! for the love of god please someone tell me so i can extract the file needed so we can get moving on this wonderful 4G LTE Sprint Samsung Tab S 10.5" Tablet i need a root for! Must have RooT...
so, does this mean that since this hasn't even been posted yet anywhere, completed, or done yet that considering this is the first step to development and achieving root, im also guessing people need this file to even start to begin making/developing the ROMs right? which probably means then there isnt/arent any even available as of yet and/or let alone a stock Rom/Custom ROMs for this particular device either is there? yes? no? if the answer is yes, then awsome cool where can i find any of them! if the answer is no, there arent any stock or custom ROMs available yet then my response is BoooooooooooooooooooooooooooooooooooooooooooooooooooooFREAAAAKKKKKIN Hisssssssssssssss 2 thisss maaaaaaaan! Bc this device has been out almost a year now and how can we begin development already on this thing! Is there anyway i can do it on my own? does someone have directions or a link to manually rooting IE the first way where we make the ADB command lines then type the next command to manually root the old fashioned way or what?! bc ill do it on my own if i have to!!!!! someone lead the way to the right direction(s) and im on it! might take some time but thats how i rooted my first smart phone the HTC EVO supersonic 31600. i know we use odin for samsung but what are the steps to get this ball moving?! if no one else is going to do it id like to try at least. anyone send me a link pls ? where do i start?
VenomousViper said:
so where is it? lol idk where it is bc i haven't yet seen it on SamMobiles site. when i enter the nomenclature it doesn't come up with any files for SM-T807P ! for the love of god please someone tell me so i can extract the file needed so we can get moving on this wonderful 4G LTE Sprint Samsung Tab S 10.5" Tablet i need a root for! Must have RooT...
so, does this mean that since this hasn't even been posted yet anywhere, completed, or done yet that considering this is the first step to development and achieving root, im also guessing people need this file to even start to begin making/developing the ROMs right? which probably means then there isnt/arent any even available as of yet and/or let alone a stock Rom/Custom ROMs for this particular device either is there? yes? no? if the answer is yes, then awsome cool where can i find any of them! if the answer is no, there arent any stock or custom ROMs available yet then my response is BoooooooooooooooooooooooooooooooooooooooooooooooooooooFREAAAAKKKKKIN Hisssssssssssssss 2 thisss maaaaaaaan! Bc this device has been out almost a year now and how can we begin development already on this thing! Is there anyway i can do it on my own? does someone have directions or a link to manually rooting IE the first way where we make the ADB command lines then type the next command to manually root the old fashioned way or what?! bc ill do it on my own if i have to!!!!! someone lead the way to the right direction(s) and im on it! might take some time but thats how i rooted my first smart phone the HTC EVO supersonic 31600. i know we use odin for samsung but what are the steps to get this ball moving?! if no one else is going to do it id like to try at least. anyone send me a link pls ? where do i start?
Click to expand...
Click to collapse
Right here. samsung-updates.com/device/?id=SM-T807P now can you upload the latest one to mega upload or mediafire? Then I can perhaps extract whats needed but still may take a while as beans or chainfire hasnt been porting cfautoroot to some devices. I could try to preroot it, but it may not work.
Root for SM-T807P
I got tired of waiting around for CF-Auto-Root to come out with a package so I made my own. It's all based off the CF-Auto-Root that I modified using another device that uses the same chip as the T807P.
I am in the process of testing it. So far I've come up with one bug which causes the DHCP wifi loop, but it was an easy fix. Once you have root access just change the permissions on the /system/etc/dhcpcd/dhcpcd-run-hooks file to "execute" by "user" "group" and "others" by using a root file explorer. It fixes the "obtaining ip address loop" for wifi.
All the standard legal stuff like - I am not responsible if you brick your device or if the root doesn't work.
Here is the link to the file I used with Odin to flash the CF-Auto-Root for my T807P.
"https://db.tt/PNeQOwAR"
gorriel said:
I got tired of waiting around for CF-Auto-Root to come out with a package so I made my own. It's all based off the CF-Auto-Root that I modified using another device that uses the same chip as the T807P.
I am in the process of testing it. So far I've come up with one bug which causes the DHCP wifi loop, but it was an easy fix. Once you have root access just change the permissions on the /system/etc/dhcpcd/dhcpcd-run-hooks file to "execute" by "user" "group" and "others" by using a root file explorer. I had to to fix the "obtaining ip address loop" for wifi.
All the standard legal stuff like - I am not responsible if you brick your device or if the root doesn't work.
Here is the link to the file I used with Odin to flash the CF-Auto-Root for my T807P.
"https://db.tt/PNeQOwAR"
Click to expand...
Click to collapse
How did you modify the stuff/exactly what did you do in cfautoroot? I tried myself but didn't know what else to do. I would love to learn! (I dont own a 807p so but I have always wondered how) Thanks!
Are you a BOOST MOBILE customer??
You now have the new Tri-Band model: Samsung Galaxy S3 (SPH-l710T)
[Update: OH1 and still works flawlessly
I RECENTLY SWITCH TO THE 60$ A MONTH PLAN COMPLETELY UNLIMITED WITH NI THROTTLING SPEEDS WHICH IN RETURN CAN HOTSPOT MULTIPLE DEVICES AND ITS WONDERFUL!!!!]
YOU CAN CALL YOUR CARRIER AND GET THE MSL NUMBER!! THAT EASY!
Are you are prompted when trying to use your HOTSPOT that you need to subscribe???
Well I got great news for you! No need to worry... Follow this guide and get your HOTSPOT
working again for ABSOLUTLY FREE !!!!!
Me nor XDA is NOT responsible for what you decide to do to your phone.
I can guarantee this will work on stock rom 4.4.2 SPH-L710T GS3.
If your willing to try this on any other phones please comment and let others know. Make/model of the phone for starters.
If you will explain your steps taken also would help others out very much! THANK !!!
I received the SPH-L710T after making an insurance claim. I originally had the SPH-L710. Anyway, all I have done so far was use ODIN to install the latest .TAR FILE from
Philz Recovery thread:---> http://forum.xda-developers.com/showthread.php?t=2201860 (only custom recovery I recommend to use period) BIG THANK YOU TO PHIL! You can check Philz Recovery out for yourself and how to root this device. I'm not going through the whole thing on how to root and so on. So, I am pretty much running the STOCK ROM that came on the phone straight out the box, [BOOST MOBILE]-[NF4]-[4.4.2]. I did ROOT w/ Philz Recovery very simple. Please make sure you take your time and read directions.
This is CONFIRMED to work on SPH-l710T running the STOCK ROM out of the box but ROOTED and I have Philz Recovery once again. I used SPCUtility.apk to finally get my MSL/SPC that I been reading about the past 4 days and couldn't get it till NOW!!! I attached the SPCUtility.apk for you to download. It did work for me. Took me days of searching till I came across a old post I tried so many different ways its ridiculous.
I ran the SPCUtility.apk and it gave me my MSL(SPC) number with out problem! (FOR WHATEVER REASON WHEN YOU LOOK IN YOUR APP DRAW THE APPS NAME IS MSL UTILITY and the icon is a picture of a lock. Open the MSL UTILITY and hit the Read SPC button. You might want write it down. You want to change your APN TYPE now.... Follow these directions to the T. This was is very easy! By adding the following ",Dun" fixed my hotspot(of course without the quotations) It was very simple. I had to find the APN TYPE option but once I found it, it was a text box and all I had to add was ,Dun and hit ok. REBOOTED and it work that easy! . AGAIN follow this EXACTLY and you should have no problems finding the APN type option.
GUIDE FOR GETTING YOUR HOTSPOT TO WORK:
STEP 1: Download the attached file named SPCUtility.apk to phone or EXTsd card. Now install it. Go to your apps and run the MSL Utility app that you downloaded. Click the Read SPC button and write it down. (icon for the app is a lock)
STEP 2: Okay so Go to dial pad and type ##3282# (##DATA#) and hit EDIT then enter the MSL/SPC number you wrote down from STEP 1.
STEP 3: Next go to MORE and select it...
STEP 4: Scroll down to LTEAPN SETTINGS and select it.
STEP 5: Select APN2 LTE internet. Scroll about half way down and select APN type and add ,Dun and select OK.
REBOOT AND PROFIT !!!
ENJOY
Please hit THANK YOU button if I was of any HELP TO YOU!
It would be very appreciated! This took a lot of time and research to get this working. I couldn't find anything on a working HOTSPOT. Only info I could find was paying for an app from the play store. Well in this case its completely FREE !
Please leave some comments or a simple reply!
4.4.2 -Boost Mobile SPH-L710T
WORKING HOTSPOT !!!!
So anybody else try this out??? I would love to get some feedback for others. Im seeing alot of views but no replys..... Wow this was huge for me. I was so excited to have my HOTSPOT back and working finally. Since i got this tri-band phone i thought i was gonna have to run sprints software to get my HOTSPOT working but that was not true. Some replys would be nice. I love and enjoy XDA very much. Such a great community!
I posted a question on the other thread asking hot you turned on the hotspot.
Sent from my SPH-L710T using XDA Free mobile app
covergeek said:
I posted a question on the other thread asking hot you turned on the hotspot.
Sent from my SPH-L710T using XDA Free mobile app
Click to expand...
Click to collapse
You dont have the hotspot in your settings option under connections???
No...for some reason the Sprint prepaid is neutered. Won't work with foxfi either
Sent from my SPH-L710T using XDA Free mobile app
covergeek said:
No...for some reason the Sprint prepaid is neutered. Won't work with foxfi either
Sent from my SPH-L710T using XDA Free mobile app
Click to expand...
Click to collapse
Your phone is rooted correct?
Also if your phones prepaid be careful cause i get messages tht i have reach my data limits. I dont know if it would burn up your money fast using the hotspot or not cause im with boost and I get a message that my data limit has been reached and i notice my speed is a lil bit slower after that. Would hate for you to use it and run threw all your money and it be cut off with lack of funds. I pay month to month plan with boost mobile
Sent from my SPH-L710T using XDA Free mobile app
@covergeek you can try using odin and flash the NF4 stock .tar file. Then flash the philz recovery .tar and root it again. Its very simple. Look around the threads for the stock NF4 .tar and go from there..... just a thought. It will deff give you the hotspot option in settings under your connections tab. I attached the screenshot. Follow the directions in the thread on the NF4 .tar to make sure you do it right. Might wanna ask questions first to make sure. Im positive someone will assist you with any questions you might have before committing to the NF4 build. Then try my guide
Cool..thanks for the info..
Sent from my SPH-L710T using XDA Free mobile app
covergeek said:
Cool..thanks for the info..
No problem bro. Anything i can do to help. Once you get either NF4 build or ND8. USE my hotspot thread and its sure to work! Rooting once you odin philz recovery is super easy. I even added the superuser update file in case its needed. Just flash the updated supersu thru recovery and you should be good to go. It will do its thing and reboot. Make sure to download busybox and supersu by chainfire. Thats what work for me. I had a problem at first but flashed the UPDATED SUPERSU file and that did the trick. Also download root checker. That will confirm you have root.
Click to expand...
Click to collapse
Works4Me
XxTeXx07xX said:
@covergeek you can try using odin and flash the NF4 stock .tar file. Then flash the philz recovery .tar and root it again. Its very simple. Look around the threads for the stock NF4 .tar and go from there..... just a thought. It will deff give you the hotspot option in settings under your connections tab. I attached the screenshot. Follow the directions in the thread on the NF4 .tar to make sure you do it right. Might wanna ask questions first to make sure. Im positive someone will assist you with any questions you might have before committing to the NF4 build. Then try my guide
Click to expand...
Click to collapse
Thank you Tex, I must have missed the link in the L710T rooting thread; NF4 hotspot is unlocked Getting the MSL was a major PITA but MSL Utility worked like a charm. Big thanks again my friend!
NightFlight1 said:
Thank you Tex, I must have missed the link in the L710T rooting thread; NF4 hotspot is unlocked Getting the MSL was a major PITA but MSL Utility worked like a charm. Big thanks again my friend!
Click to expand...
Click to collapse
You are very welcome. Im super stoked i was of help. I love this community
dearly. Im sure this will work on other phones too.... Not getting much feedback
as I thought. It took me days to find a app that actually work for the MSL/SPC code.
Anyway I wanna thank you for reply and feedback ENJOY that hotspot and please hit the thanks button lol
XxTeXx07xX said:
You are very welcome. Im super stoked i was of help. I love this community
dearly. Im sure this will work on other phones too.... Not getting much feedback
as I thought. It took me days to find a app that actually work for the MSL/SPC code.
Anyway I wanna thank you for reply and feedback ENJOY that hotspot and please hit the thanks button lol
Click to expand...
Click to collapse
I'll try this out as soon as I can. Working on getting rooted,which I find out now. Also will this work on Sprint gs3?
zoedreads said:
I'll try this out as soon as I can. Working on getting rooted,which I find out now. Also will this work on Sprint gs3?
Click to expand...
Click to collapse
Im sure it will. Follow the guide. You wanna find that option APN TYPE. Not 100 percent on if your menu is exactly like mine but im 99 percent sure it will be. Once you go for it let me know either post it here or pm me. If you need any help during the process please ask for help. Its very handy if you have a pc to communicate during the process. It will make it easier for me to help if you run into any confusion.... Also please reply and give feedback for others that might come across the same thing as you do. Im pretty sure it will be the same as my guide explains...
Also its very easy to root these phones. I recommend using ODIN and flash Philz Recovery .tar file in the PDA slot. Uncheck auto reboot and other option. Once you get the green pass sign. Disconnect phone, pull battery and enter recovery mode. There a option to root phone in the menu. Very easy. There is alot of helpful guides here to look at. Good luck to ya. Pay attention to them. You need to flash the 4.4. Know as the kitkat bootloader if you upgrading. Depending on what you are already running on your phone.
¤[SPH-L710T_4.4.2_NF4]¤
¤[STOCK_ROOTED_DEODEXED]¤
XxTeXx07xX said:
Im sure it will. Follow the guide. You wanna find that option APN TYPE. Not 100 percent on if your menu is exactly like mine but im 99 percent sure it will be. Once you go for it let me know either post it here or pm me. If you need any help during the process please ask for help. Its very handy if you have a pc to communicate during the process. It will make it easier for me to help if you run into any confusion.... Also please reply and give feedback for others that might come across the same thing as you do. Im pretty sure it will be the same as my guide explains...
Also its very easy to root these phones. I recommend using ODIN and flash Philz Recovery .tar file in the PDA slot. Uncheck auto reboot and other option. Once you get the green pass sign. Disconnect phone, pull battery and enter recovery mode. There a option to root phone in the menu. Very easy. There is alot of helpful guides here to look at. Good luck to ya. Pay attention to them. You need to flash the 4.4. Know as the kitkat bootloader if you upgrading. Depending on what you are already running on your phone.
¤[SPH-L710T_4.4.2_NF4]¤
¤[STOCK_ROOTED_DEODEXED]¤
Click to expand...
Click to collapse
Thanks that what I needed. I'm at work but getting off soon.I'll let you how turns out.Been at this all week.Also I'm on stock,use towelroot but as you know they patch that.
But thanks again n I'll let you know
zoedreads said:
Thanks that what I needed. I'm at work but getting off soon.I'll let you how turns out.Been at this all week.Also I'm on stock,use towelroot but as you know they patch that.
But thanks again n I'll let you know
Click to expand...
Click to collapse
Np again thank you for the replay. Please hit the thanks button I join this wonderful community to help and help others. Its truly a good feeling every time I see a happy person reply getting their hotspot working! I should title it just HOTSPOT cause i kno it should work on more the just my SPH-L710T. Anyway ENJOY! N please hit the thanks button
¤[SPH-L710T_4.4.2_NF4]¤
¤[STOCK_ROOTED_DEODEXED]¤
XxTeXx07xX said:
Np again thank you for the replay. Please hit the thanks button I join this wonderful community to help and help others. Its truly a good feeling every time I see a happy person reply getting their hotspot working! I should title it just HOTSPOT cause i kno it should work on more the just my SPH-L710T. Anyway ENJOY! N please hit the thanks button
¤[SPH-L710T_4.4.2_NF4]¤
¤[STOCK_ROOTED_DEODEXED]¤
Click to expand...
Click to collapse
Hey need some help with the philz recovery. I have it on my phone n all. Thing is still no root. I saw the re root superuser n pick it reboot still nothing
zoedreads said:
Hey need some help with the philz recovery. I have it on my phone n all. Thing is still no root. I saw the re root superuser n pick it reboot still nothing
Click to expand...
Click to collapse
After you (re)root with Philz, install/update SuperSU via play store.
zoedreads said:
Hey need some help with the philz recovery. I have it on my phone n all. Thing is still no root. I saw the re root superuser n pick it reboot still nothing
Click to expand...
Click to collapse
Have you went to the playstore and downloaded busybox by stericson and SuperSU by chainfire???? Thats a must. After you download them try recovery mode and re root. Check the option the verify root on exit. If that still does not work try installing the SuperSU-UPDATE that I attched to this post and install it thru recovery.
Well crazy thing I had it. After reboot it everytime I lost root n superuser. I downloaded superuser n after reboot it gone n my root gone.
mattzeller said:
After you (re)root with Philz, install/update SuperSU via play store.
Click to expand...
Click to collapse
Agree.... thats a must