Develop Bugs

Suggestions for a Protective Cover

I've had my dash now for 6 months and noticing im becoming less and less careful with it. I just saw on Amazon.com there are a few to choose from. I like to keep my phone in my pocket.
Any info or suggestions on what everyone else uses and likes would be greatly appreciated.

#2! said:
I've had my dash now for 6 months and noticing im becoming less and less careful with it. I just saw on Amazon.com there are a few to choose from. I like to keep my phone in my pocket.
Any info or suggestions on what everyone else uses and likes would be greatly appreciated.
Click to expand...
Click to collapse
Do a search for black aluminium in this forum and you will find some cases and people choices.
Link as i'm now @ computer

stylez said:
Do a search for black aluminium in this forum and you will find some cases and people choices.
Click to expand...
Click to collapse
Didn't find much help in that thread. Just long discussions about whether aluminum cases block signals.

#2! said:
Didn't find much help in that thread. Just long discussions about whether aluminum cases block signals.
Click to expand...
Click to collapse
There are some links from Pudge and also views on cases i was just about to say that it's not exact subject but there are some ideas.
I use a leather case.
There is a selection on here http://www.wirelessground.com/tdahtcexac.html reason i gave other link is as the Aluminium cases look very sturdy.

Iv been leaning towards the cheaper silicon covers or clear plastic snap on's but I wanted some insight of whether they are worth having or if i should just save my pennies to buy a cool aluminum or leather cover.
I like the idea of having the screen covered though.
Thanks for the info Stylez.

#2! said:
Iv been leaning towards the cheaper silicon covers or clear plastic snap on's but I wanted some insight of whether they are worth having or if i should just save my pennies to buy a cool aluminum or leather cover.
I like the idea of having the screen covered though.
Thanks for the info Stylez.
Click to expand...
Click to collapse
I used to use a silicon case on the MDA Compact but found that crap would get between the silicon and the phone, the leather case does me as i only tend to have the case on when leaving the house but the Aluminium cases do look pucka and bet they would keep the phone in better shape for longer.

I really like the silicon covers... they are not bad in my opinion... you can get them for like less than 5 dollars off ebay...

I have a couple of the plastic covers and they are great. I wish they were rubbery (there are some that are) but the durability is great, they have protected my Dash very well. I only had one silicone cover and my complaint with it was pocket lint.
If you are a pocket person, I think you will like the plastic. If you are not, the silicone is "grippier" and thinner. I cant comment on the metal ones, they always scared me.

Haha metal ones look weird in my opinion. And yes I agree with you on the pocket lint... sometimes that is a pain...

rubberized cover
this is the one I have on mine and I've dropped it a few times and its quite strong against scratches and it cradles it pretty well. The downside is if your phone happens to freeze from overclocking or from doing tweaks, its a pain in the butt to remove for the battery or to change the sd card. To me is so worth it. http://cgi.ebay.com/New-Black-Rubbe...4|66:2|65:12|39:1|240:1318|301:1|293:1|294:50

this the case i am using , http://www.wirelessground.com/tdaboglsccec.html
i needed a belt clip style to match the custom made setup i have in my vehicle from a previous phone .
holds the phone upright and secure in my field of vision even if i roll over ( yes it is an offroad vehicle ) i will try to get a pic uploaded tonight.
also , it can fit over a 1550 Mah extended battery , if you remove the back cover .

I´m using this and I love it!
and very cheap
http://www.boxwave.com/products/flexiskin/flexiskin-htc-excalibur_2351.htm

orb3000 said:
I´m using this and I love it!
and very cheap
http://www.boxwave.com/products/flexiskin/flexiskin-htc-excalibur_2351.htm
Click to expand...
Click to collapse
Dose covering the top set of buttons impair the use in any way??
I wouldn't mind covering all the buttons if they all worked. Kinda like a keyboard condom.

T-Mobile Accessories

I am a rep for T-Mobile and we have started receiving our accessories in the stores. I don't have pictues just yet because I don't want to lose my job as many of my co workers are also tech savvy and on this forum, however I have seen that there are a few nice accessories that you all can expect from T-Mobile at launch. Keep in mind that our stuff is pretty expensive but there is a buy 2 and get 20% off and buy 3 get 30% off accessories special going on right now.
1) leather vertical belt clip
2) gel skins in blue, purple and pink so far
3) a hard shell with a kind of monochrome checker pattern n the back. (This one is nice and thin but is the kind that lacks wrap around protection on the top and bottom of the phone. Kinda just cradles the sides and back. Still nice though.)
4) there is supposed to be a hard shell with a slot for you ID and credit cards. (I haven't seen this one yet but if its nice and thin this is the one I will buy.)
5) there should be a desktop cradle coming soon too because this phone has the charging contacts on the side so it will be a landscape cradle. Looking forward to this one too! (Missed it from when I had my nexus)
Anyways I'll stop rambling now. I hope this helps you all out and at least can give you an idea of what is coming at launch time guys. The MyTouch line is
T-Mobile's franchise line of products so expect to see a lot of advertising, support and a full line of accessories.
Sent from my T-Mobile G2 using XDA App

Thanks for the update. Keep us posted when and how we can order the new phone.

I think one of the best places to get the phone will be at walmart usually 50-60 bucks cheaper...

The credit card holder shell/skin is cool! (already got it in my store)
-clear back shell/rubber side hybrid is cool too

motorjonny said:
The credit card holder shell/skin is cool! (already got it in my store)
-clear back shell/rubber side hybrid is cool too
Click to expand...
Click to collapse
Is there a chance you could post pics of credit card holder shell? Sounds interesting!

Any luck telling us location of your store? I personally am looking for the white my touch with the clear hard shell case and kickstand

Im using the black gel skin on mine we got some nice ones in my store there is a clear one with a grey rubber grip down the sides which cradles the phone nicely and covers the corners as well. I threw it on the white one and it contrasted very well. Wasnt to crazy about it on my black phone though.

t-mobiles facebook page posted a bunch of pics of the accessories. they all look pretty sweet!

here is a link to the preview:
http://www.facebook.com/album.php?aid=248603&id=108726828894&ref=mf
I'm digging the black case with clip

Are there any real-life pictures of these cases? I'm looking for a slim case that will protect that is not the rubber/silicone.

I got the black silicon slip case, the dual-port car charger and the generic GPS cradle (I wish they'd hurry up and release the official docks).
The silicon case is choice. It's not too 'rubbery' so it doesn't stick to things like other cases have in the past. It is extremely smooth. It feels like the soft touch paint along the frame, and adds the perfect amount of weight to the phone. I applied the included screen protector (film), which took a bit of 'finger grease' to cut back on the friction. Now, it feels similar to the standard glass (which was smooth as silk, similar to the Vibrant).
The generic GPS cradle is decent. No charging ports, but it serves a purpose. Pity the Car Home app is a bit buggy and not as handy as stock 2.2's application.
I'll be first in line to pick up the official docks when they are launched.

pics please

jorodee said:
pics please
Click to expand...
Click to collapse
+1..... Pleaseeeeeee!!

http://www.dropbox.com/gallery/6408333/2/mt4g/Wplastic-Grubber?h=ad75a1

jOrOdee said:
pics please
Click to expand...
Click to collapse
NexVision said:
http://www.dropbox.com/gallery/6408333/2/mt4g/Wplastic-Grubber?h=ad75a1
Click to expand...
Click to collapse
So it is two cases? I don't follow... What are the clear cases with the kickstand? How much was that one?

That is the case I am using I may take more pictures of others later tonight It is a 2 part case has a thin rubber underlying which the plastic overlays on to make one case.

I really like that white case, almost bought it last night. I just couldn't see spending $30 on it, that should be $20 at most. Waiting on some ebay knockoffs.

I got the clear case with the grey grip on the sides and i put it on a blk and am happy about it. Even with the case its not too much bigger than an i phone but the screen is bigger and it is lighter.

NexVision said:
http://www.dropbox.com/gallery/6408333/2/mt4g/Wplastic-Grubber?h=ad75a1
Click to expand...
Click to collapse
I have this exact case and it's just amazing!! I love it!
Case also includes a full screen protector.

That is a sweet case. I used one from OtterBox for my N1 called a "commuter case" and this is just like it.
The MT4G fits nice and snug and is very well protected.
Well worth the $30 imo.
Sent from my HTC Glacier using XDA App

White Metal Bumper Review w/ Hex Screws

Not much of a reviewer here, but I ordered this from eBay about 2 weeks ago and it arrived today from China. Packaging was a bit strange and is advertised as a Flip Cover i9300. It comes with 1 driver for the screws which can be put on your keychain. 6 screws ( 4 for the phone and 2 extra on the driver ). The overall feel is pretty smooth. The paint seems a bit cheap and might chip easily over time. The buttons are a bit difficult to access.. thats my main gripe, but not near as bad as pressing really hard on the otterbox commuter. No dramatic signal loss that I can tell .. I benchmarked at -87 and with the case -95. Pictures behind the link to show it off in action. If you have any questions please post them here!
http://imgur.com/a/zM4nD#0

Thanks for the pics, I ordered the same case and am waiting for it to arrive. Glad to see the signal loss isnt too bad.
EDIT: Quick question, how is the padding inside the bumper. This was my main concern with buying one.

Looks nice but buttons look a bit mad. I got this
http://pages.ebay.com/link/?nav=item.view&id=180924186125
Sent from my GT-I9300 using XDA
It's really nice and quite flush. I was a bit worried about the slide action but it sits tight. My 4th case so far.

I want to get one but i really do not see the point in buying one for two reasons..
1. The back bit of the phone is the bit i want to protect this doesn't keep it from getting scratched and stuff.
2. It's ugly lol..

Se23 said:
Looks nice but buttons look a bit mad. I got this
http://pages.ebay.com/link/?nav=item.view&id=180924186125
Sent from my GT-I9300 using XDA
It's really nice and quite flush. I was a bit worried about the slide action but it sits tight. My 4th case so far.
Click to expand...
Click to collapse
So you bought a fake Triobump. The real one gets real loose and flimsy. Doesn't speak much for the fake one.

Cbroph said:
Thanks for the pics, I ordered the same case and am waiting for it to arrive. Glad to see the signal loss isnt too bad.
EDIT: Quick question, how is the padding inside the bumper. This was my main concern with buying one.
Click to expand...
Click to collapse
I'll take it out tonight and double check. I was so excited to get it on that I didn't even look at it that well. I'll check it out tonight.. I did contemplate looking into putting more in. I'll try and take some better pictures of it.

How do you push the buttons?

chrischoi said:
How do you push the buttons?
Click to expand...
Click to collapse
its a bit difficult if you have big fingers, but the tips of my fingers fit in there nicely.. its a bit harder than most cases.

bought the same one in black for my white s3. case is perfect fit for a pouch. previous smoke tpu case would always shut the phone off

would of bought it if it covered the buttons, so it would be easier to press. also, having a nice backplate would be nice, but i was thinking of just buying the white carbon fiber back

@chrischoi Never heard of triobump but we'll see how it goes
Just looked it up on YouTube and see your post.
Sent from my GT-I9300 using XDA

JayDieu said:
would of bought it if it covered the buttons, so it would be easier to press. also, having a nice backplate would be nice, but i was thinking of just buying the white carbon fiber back
Click to expand...
Click to collapse
The bumper alone drops reception about 5db, adding a metal backplate would encase the phone in a faraday cage, thus drooping reception to 0. making it no longer a phone, be glad no-one has offered that, because anyone that bought it, would be wasting money.

wow i really like the look and shape of that metal bumper, I think it looks really nice!
I wonder if they have a version with buttons instead of holes.
I have a "fake triobump" without buttons, and its easy enough to use once you get used to it, I'd still prefer to have buttons for the cleaner look and ease of use.
the hex screw bumper with buttons would be perfect!
btw my "fake triobump" was slightly loose fitting at first, but it was very snug once i put on my screen protector and fake carbon fiber backplate (which also slightly recesses the camera :good I LOVE the fit and feel of this combination.

Meemo23 said:
I want to get one but i really do not see the point in buying one for two reasons..
1. The back bit of the phone is the bit i want to protect this doesn't keep it from getting scratched and stuff.
2. It's ugly lol..
Click to expand...
Click to collapse
LOL the GS3 back is simple to replace and only $7 to get a new OEM one. I don't see a reason to add the bulk of a full case when I can just add a bumper to the part that's harder to protect.

Black Bumper for S3 (HQ pics) Recommend!!

Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks

Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!

You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too

Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2

i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.

I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.

Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap

How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.

I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.

ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.

is it easy to take it in and out of your pant pocket

denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.

Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity

PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:

Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.

Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.

rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:

dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.

Has anyone bought cases by Rock?

Hey guys!
I came across a few TPU cases by Rock.. Flip and back-only. Anyone heard of or used them? Couldn't find any reviews for the case.. I'm not sure about the TPU quality and transparency of the back (for the flip one). Check them out, heres the link:
Flip: http://www.rockphone.cn/en/Html/Product/507.html#next
Back only: http://www.rockphone.cn/en/Html/Product/517.html#next
:good:

I bought this one ( search ROCK big city Brand New Leather Folio Case Cover Pouch For HTC One M7
in ebay) in navy, turned out to be a bit too shiny/shimmery for me. If your interested I can sell it to you from UK, unused with retail packaging.

raghav2511 said:
Hey guys!
I came across a few TPU cases by Rock.. Flip and back-only. Anyone heard of or used them? Couldn't find any reviews for the case.. I'm not sure about the TPU quality and transparency of the back (for the flip one). Check them out, heres the link:
Flip: http://www.rockphone.cn/en/Html/Product/507.html#next
Back only: http://www.rockphone.cn/en/Html/Product/517.html#next
:good:
Click to expand...
Click to collapse
I think this one is the best looking one ive seen so far. Might have to place an order for an orange one

i purches both of them, i loved the rock cases on my hox and my S3.
the back only cover arrieved yesterday. great looking, good feeling and perfect match. just a few rather sharp edges, which i removed with my nails.
i got a grey cover for my silver one, looks really great.
i am waiting for the black flip cover . it did not arrieved so far

GlobeUK said:
I bought this one ( search ROCK big city Brand New Leather Folio Case Cover Pouch For HTC One M7
in ebay) in navy, turned out to be a bit too shiny/shimmery for me. If your interested I can sell it to you from UK, unused with retail packaging.
Click to expand...
Click to collapse
Thanks for your offer, but I'm thinking about the yellow one. Haven't really decided about it yet.

phewBAR said:
I think this one is the best looking one ive seen so far. Might have to place an order for an orange one
Click to expand...
Click to collapse
If you do get one, please post a quick review and let others know how the cases actually feel!

Havoc2k said:
i purches both of them, i loved the rock cases on my hox and my S3.
the back only cover arrieved yesterday. great looking, good feeling and perfect match. just a few rather sharp edges, which i removed with my nails.
i got a grey cover for my silver one, looks really great.
i am waiting for the black flip cover . it did not arrieved so far
Click to expand...
Click to collapse
Good to know! Two questions for you -
1. Is the TPU flexible? If so, is it like completely flexible or just a little?
2. Is the case too shiny? Like candy colours (think: Nokia Lumia)?

raghav2511 said:
If you do get one, please post a quick review and let others know how the cases actually feel!
Click to expand...
Click to collapse
Yep, just placed an order for Orange flip. I'll let you guys know

raghav2511 said:
Good to know! Two questions for you -
1. Is the TPU flexible? If so, is it like completely flexible or just a little?
2. Is the case too shiny? Like candy colours (think: Nokia Lumia)?
Click to expand...
Click to collapse
1. its rather hard, looks not like TPU, hard plastic would i say, but still flex enoth to fit it
2. the grey one is not that shiny, matt i would say

I ordered the black one, and it just arrived today. Bit of a shame I don't have a phone to put in it, because it looks great. It is glossy, but not overboard. Maybe similar to the gloss on the original PS3? But don't quote me on that, I only owned the slim.
My One should arrive tomorrow. Once it does, I'll post up some pictures so you guys can check it out.
As far as Rock cases go though, I had one for my One X and I really liked it. I would def recommend you guys check them out. Or also Capdase. I just got a white case from them today as well. Both very nice. One is glossy, one is matte.

Thanks! Looking forward to the pics
Sent from my HTC One using xda app-developers app

Do you order straight from their website ? I had their case for my s3 and loved it but then a whole ton of knockoffs started coming out.

So my phone arrived, and I had it in the Rock case within about 5 minutes. I'm in Korea for the day, so I'm trying it out. So far: really like it. The case fits like a glove. Doesn't snap on really tight like some, but there is absolutely no movement. I actually prefer this to the ones that make you think you are going to break your phone putting on/taking it off. The black on black looks so good! It's super thin, so the phone shape is maintained. It also has a very slight lip around the edges on the front so you can put it down on it's face, if you want.
The negatives: the black is a fingerprint magnet. I guess that's why they bundled a cloth in the package. The other is I am afraid I'm gonna drop my phone and it will break. I attribute the fear to having just got the phone, as well as being pretty hungover . If I were to drop the phone, the case wouldn't do much to protect it. It's more like a scratch guard.
Anyway, so far I really like it. I bet the coloured ones on the black would look ridiculous good. I'll add pictures when I get some time.
Sent from my HTC One using xda app-developers app

I have Rock "Quicksand" case with the Xperia S.
Dropped it from around waist level to the hard ground. No scratch.
So.. when I got One, I quickly try to find a Quicksand series but they don't seem to made it yet.

pepporony said:
I have Rock "Quicksand" case with the Xperia S.
Dropped it from around waist level to the hard ground. No scratch.
So.. when I got One, I quickly try to find a Quicksand series but they don't seem to made it yet.
Click to expand...
Click to collapse
Search on amazon for the bear motion case. I had the quicksand for my s3 and this bear motion feels just like that.

azelaya said:
Search on amazon for the bear motion case. I had the quicksand for my s3 and this bear motion feels just like that.
Click to expand...
Click to collapse
Thanks, I already ordered something similar from ebay (not bear motion). I believe they came from the same wholesale retailer and slap different brand on it...