Hi Guys,
Got my hands on the SGP Ultra Thin Air case, a thin snap-on style case that won't add much bulk/weight to your phone and is for those users that like to keep their devices slim. You can watch the full review below:
Capsule series is much better. No top and bottom part is big failure.
Ploone said:
Hi Guys,
Got my hands on the SGP Ultra Thin Air case, a thin snap-on style case that won't add much bulk/weight to your phone and is for those users that like to keep their devices slim. You can watch the full review below:
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
Looks similar to the $3 case from ebay, is sgp just repackaging these cases?
Look poor with finger prints.
All snap on style cases will look similar, cutouts are a little different and the Ultra Thin features a soft touch back.
Sent from my Nexus S using XDA App
I have the Thin Air case as well, along with the Glas, both are excellent products, thought a bit overpriced.
The Thin Air is a quality case, I am currently in Hong Kong, so I've tried on all the generic cases at the electronic malls as well. The cheap generic ones doesn't fit the best, there is always a creak or slight warp on the sides of the case that compresses as you squeeze the sides, which to me is annoying. The "better" branded ones are on par with the SGP, but the price is also similar to SGP, I rather buy from a well known brand.
I've had two cheap generic ones before I bought the case mate barely there and the SGP Thin Air, both cheap cases broke a few days after when I took the case on and off.
The Thin Air does leave finger prints, but I don't care too much since it is only the back, and it can be wiped away. The most important part for me is a super thin case with minimal protection that doesn't break easily. So far (fingers crossed), SGP has done it.
chiefroastbeef said:
I have the Thin Air case as well, along with the Glas, both are excellent products, thought a bit overpriced.
The Thin Air is a quality case, I am currently in Hong Kong, so I've tried on all the generic cases at the electronic malls as well. The cheap generic ones doesn't fit the best, there is always a creak or slight warp on the sides of the case that compresses as you squeeze the sides, which to me is annoying. The "better" branded ones are on par with the SGP, but the price is also similar to SGP, I rather buy from a well known brand.
I've had two cheap generic ones before I bought the case mate barely there and the SGP Thin Air, both cheap cases broke a few days after when I took the case on and off.
The Thin Air does leave finger prints, but I don't care too much since it is only the back, and it can be wiped away. The most important part for me is a super thin case with minimal protection that doesn't break easily. So far (fingers crossed), SGP has done it.
Click to expand...
Click to collapse
Thanks for sharing, I agree with most of what you have to say, however I feel the case itself just isn't for me. SGP however has been releasing some quality products for the GS2 (as expected) - and I'm excited for what they are bringing next.
Ploone said:
Thanks for sharing, I agree with most of what you have to say, however I feel the case itself just isn't for me. SGP however has been releasing some quality products for the GS2 (as expected) - and I'm excited for what they are bringing next.
Click to expand...
Click to collapse
I agree, this case isn't for most people, since the normal person that wants a case would want more protection than what the Thin Air has to offer, plus like your video mentioned, there is no top and bottom coverage. But out of the cases I have, I like this the most, the black color blends in with the phone.
Thank you for the review videos, you are doing a great job, very clear voice, smooth presentation, no "umms" or "uhhs," or any tongue smacking. Keep it up! It is because of you that I bought the Glas, which I love!
chiefroastbeef said:
I agree, this case isn't for most people, since the normal person that wants a case would want more protection than what the Thin Air has to offer, plus like your video mentioned, there is no top and bottom coverage. But out of the cases I have, I like this the most, the black color blends in with the phone.
Thank you for the review videos, you are doing a great job, very clear voice, smooth presentation, no "umms" or "uhhs," or any tongue smacking. Keep it up! It is because of you that I bought the Glas, which I love!
Click to expand...
Click to collapse
Thanks so much I enjoy doing it and I have a lot more content coming up!
Try to get your hands on one of these http://www.ebay.co.uk/itm/SAMSUNG-G...897177?pt=PDA_Accessories&hash=item3f0bae1319 !
I'm awaiting mine, but surely people would be interested.
Sent from my GT-I9100
I was really excited for this case due to it's look and how minimal it is, but after just 3 days I need to stop using it.
The stickers you place along the sides are constantly moving. They slide up and out of the case somehow, so you need to slide them back down, which leaves a trail of sticky residue.
Also, there is one spot on the back my phone just above the battery
cover that is now damaged due to the case rubbing against it. There are scratches and an area where the color has rubbed off.
My phone is in worse condition after a few days in this case than from a week without any case.
Sent from my GT-I9100 using XDA Premium App
tietherope said:
I was really excited for this case due to it's look and how minimal it is, but after just 3 days I need to stop using it.
The stickers you place along the sides are constantly moving. They slide up and out of the case somehow, so you need to slide them back down, which leaves a trail of sticky residue.
Also, there is one spot on the back my phone just above the battery
cover that is now damaged due to the case rubbing against it. There are scratches and an area where the color has rubbed off.
My phone is in worse condition after a few days in this case than from a week without any case.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Really? That doesn't bode well at all. Did you check authenticity of the case with the serial number at their site?
Sent from my GT-I9100
m0rtiis said:
Really? That doesn't bode well at all. Did you check authenticity of the case with the serial number at their site?
Sent from my GT-I9100
Click to expand...
Click to collapse
I did not, but it was bought directly through their site, not a 3rd party.
Don't get me wrong, the case is beautiful and the damaged area is a lot smaller than the damaged area would be if you were to drop it on concrete without this case. I just want to let others know that this happens as others could be even more OCD about their phone condition than I am. SGP knows the inside of this case scratches your phone, that's why they include the stickers. Unfortunately this one spot was missed, either due to oversight, or it is too small of a location to place a sticker.
I had the Captivate before this phone using a Body Glove case. While it is the best case I have ever used on a phone, it also scratched up the top and bottom of my phone pretty bad. It's a pretty common thing with the harder cases.
tietherope said:
I did not, but it was bought directly through their site, not a 3rd party.
Don't get me wrong, the case is beautiful and the damaged area is a lot smaller than the damaged area would be if you were to drop it on concrete without this case. I just want to let others know that this happens as others could be even more OCD about their phone condition than I am. SGP knows the inside of this case scratches your phone, that's why they include the stickers. Unfortunately this one spot was missed, either due to oversight, or it is too small of a location to place a sticker.
Click to expand...
Click to collapse
I see. I'm awaiting one of these as we type, do you have pictures of the scratches so I can avoid them with stickers?
Sent from my GT-I9100
m0rtiis said:
I see. I'm awaiting one of these as we type, do you have pictures of the scratches so I can avoid them with stickers?
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, definitely. Just give me a little while and I will get you a picture of either the scratches or at least the part of the case causing it. Whichever will show up on camera first.
tietherope said:
Yeah, definitely. Just give me a little while and I will get you a picture of either the scratches or at least the part of the case causing it. Whichever will show up on camera first.
Click to expand...
Click to collapse
Trouble with the camera?
Sent from my GT-I9100
m0rtiis said:
Trouble with the camera?
Sent from my GT-I9100
Click to expand...
Click to collapse
Nope, just personal emergencies that required me to be out of town for a week. I'll get some pics after work tonight.
I received my Ultra Thin Air Infinity White today and I have to say I'm quite disappointed.
The case doesn't fit that well. If I lay the phone on a table and press down on the left or right side the phone sinks deeper into the case. Without pressure the edges of the case are almost even with the screen's surface, it's only if I press down on the phone that the edges rise above the screen.
Is this a flawed specimen or are all the Ultra Thin Air cases like this?
m0rtiis said:
I received my Ultra Thin Air Infinity White today and I have to say I'm quite disappointed.
The case doesn't fit that well. If I lay the phone on a table and press down on the left or right side the phone sinks deeper into the case. Without pressure the edges of the case are almost even with the screen's surface, it's only if I press down on the phone that the edges rise above the screen.
Is this a flawed specimen or are all the Ultra Thin Air cases like this?
Click to expand...
Click to collapse
As I stated in the video, it's not as tight as I'd like it to be. It won't fall off but I feel a gap between. Seems like it's all cases.
Ploone said:
As I stated in the video, it's not as tight as I'd like it to be. It won't fall off but I feel a gap between. Seems like it's all cases.
Click to expand...
Click to collapse
No reflection on your review, I ordered the case before you published it.
It's a shame though, it looks good but I'm not sure I'll use it much.
Related
Hi,
I'm waiting for my Samsung Galaxy S II to arrive in the mail that I just bought on Ebay for $770 CAD. I was wondering what were the best cases available that won't detract from the phone's, 'sexyness'. Here are a few cases I thought looked nice on Ebay:
Barely There Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...00292&ssPageName=STRK:MEWAX:IT#ht_2449wt_1115
Leather 'Wallet' Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...58999&ssPageName=STRK:MEWAX:IT#ht_3824wt_1115
Mesh Case:
http://cgi.ebay.ca/Samsung-Genuine-...Accessories&hash=item2a119b4aec#ht_4050wt_957
Does anyone know what would be the best case for what I'm looking for? I'm focused on quality and looks rather than the price.
UPDATE: I just read the thread rules that stated "no advertising of any kind". Please note that I am not advertising these products. I am only posting them here for comparative purposes, with no intention to sell any products.
UPDATE 2: I bought the "barely there TOUGH" case. It was a little more expensive than the average case (I think it's going for 30 on ebay as of dec 16) but let me tell you, it is probably the only case you'll ever need for this phone. It feels like my phone is wearing a badass suit while still lookin fresh. Buy this case. You'll love it.
Jamie
DJ_Junkee said:
Hi,
I'm waiting for my Samsung Galaxy S II to arrive in the mail that I just bought on Ebay for $770 CAD. I was wondering what were the best cases available that won't detract from the phone's, 'sexyness'. Here are a few cases I thought looked nice on Ebay:
Space Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...00292&ssPageName=STRK:MEWAX:IT#ht_2449wt_1115
Leather 'Wallet' Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...58999&ssPageName=STRK:MEWAX:IT#ht_3824wt_1115
Mesh Case:
http://cgi.ebay.ca/Samsung-Genuine-...Accessories&hash=item2a119b4aec#ht_4050wt_957
Does anyone know what would be the best case for what I'm looking for? I'm focused on quality and looks rather than the price.
UPDATE: I just read the thread rules that stated "no advertising of any kind". Please note that I am not advertising these products. I am only posting them here for comparative purposes, with no intention to sell any products.
Jamie
Click to expand...
Click to collapse
barely there and mesh case are similar..both are slim ,light.. both look perfect..
mesh case has holes that might help on heat transfer from the phone,and can be removed much easier than the barely there case..
both do not cover top and bottom of the phone(barely there protects about 0.5cm more)..
in terms of the two in my opinion mesh case is better,,
the other case protects much more..but makes your phone extra large..
its a matter of personal taste
I like the mesh case, but I doubt these cases will protect the phone from any falls. I really like the Rearth case, and the mesh case. I'm waiting now for a Case-Mate Pop case I'm going to review, which will be out in august or september as I was told from CM. The best thin cases? I really REALLY like the Rearth case. I reviewed it just yesterday, check out my sig for that. The Mesh case, which I also own, are very good, and leave the phone all sexy ... The CM cases, I don't like the barely there case series. I don't know why. It makes it look too plain.
ive got the mesh case in black look great on the phone and as already stated really easy to take on and off but it does collect dust and dirty under it like a magnet. plus probably not much protection if dropped
I've got the casemate tough n it is nice, stops dust n grease, would defiantly protect from a fall. However the phone gets stupidly hot n stays hot for ages. Just ordered a mesh case to see how that goes
Sent from my GT-I9100 using XDA Premium App
I have the samsung mesh in white and it collected dust under it like nobodys business! It looks sooo sexy though! Solution? I ordered a Zagg maximum protection and installed it on the back and sides... Like stated before, the case is so easy to put on it wrapped right around it perfect and you cant even tell its there. So i am totally protected (from scratches) and still look sexy and slim.
Sent from my GT-I9100 using XDA App
daddymatt said:
I have the samsung mesh in white and it collected dust under it like nobodys business! It looks sooo sexy though! Solution? I ordered a Zagg maximum protection and installed it on the back and sides... Like stated before, the case is so easy to put on it wrapped right around it perfect and you cant even tell its there. So i am totally protected (from scratches) and still look sexy and slim.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
this is the best solution..zagg for the corners and mesh case..
coming soon
http://www.otterbox.com/Samung-Galaxy-S-II-Commuter-Series-Case/SAM4-I9100,default,pd.html
Don't care for the mesh case... tops and bottoms are completely exposed.
I'm using the SGP Ultra Capsule in Soul Black, fantastic case.
I'm waiting for this case to be back in stock: http://www.senacases.com/samsung-cases/galaxy-s-2/ultraslim/
I love how thin this phone is and I dont want to ruin it with something bulky.
Check these out, not yet available but seems to be really good
http://www.otterbox.com/samsung-cases/samsung-cases,default,sc.html
Could someone please recommend a good slip-in pouch for the GS2?
I don't feel comfortable with the hard plastic cases, as they tend to harm the phone body after sometime..
anti-derivative said:
coming soon
http://www.otterbox.com/Samung-Galaxy-S-II-Commuter-Series-Case/SAM4-I9100,default,pd.html
Click to expand...
Click to collapse
niketshah11 said:
Check these out, not yet available but seems to be really good
http://www.otterbox.com/samsung-cases/samsung-cases,default,sc.html
Click to expand...
Click to collapse
Thanks guys,
I think the Ottercase looks the best so far, as it seems to have the most protection. My only concern is that it may make the phone look too bulky.
Any experience with these cases?
Jamie
I bought this one... cheap and great
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=120702657798&ssPageName=STRK:MEWNX:IT
I've got both the Casemate barely there and the genuine mesh case (black with italic S character).
Both are thin, lightweight and adds a better grip without making it difficult to put the phone in and out of your pocket (I use tight pants ). In fact they are very similar, but the barely there has a bit more matte color, and is a tad more gray when compared to the completely black mesh case. Also the mesh case feels a tad better in the hand, and is easier to take on and off (it still sits firmly on the phone).
As you are talking about keeping the sexiness of the phone, I would recommend the mesh case But they both are good, so you won't be disappointed either way.
nicpol7 said:
barely there and mesh case are similar..both are slim ,light.. both look perfect..
mesh case has holes that might help on heat transfer from the phone,and can be removed much easier than the barely there case..
both do not cover top and bottom of the phone(barely there protects about 0.5cm more)..
in terms of the two in my opinion mesh case is better,,
the other case protects much more..but makes your phone extra large..
its a matter of personal taste
Click to expand...
Click to collapse
Hrti said:
I've got both the Casemate barely there and the genuine mesh case (black with italic S character).
Both are thin, lightweight and adds a better grip without making it difficult to put the phone in and out of your pocket (I use tight pants ). In fact they are very similar, but the barely there has a bit more matte color, and is a tad more gray when compared to the completely black mesh case. Also the mesh case feels a tad better in the hand, and is easier to take on and off (it still sits firmly on the phone).
As you are talking about keeping the sexiness of the phone, I would recommend the mesh case But they both are good, so you won't be disappointed either way.
Click to expand...
Click to collapse
Thanks for your input Hrti!
I heard a few other people saying that the mesh case doesn't quite cover the whole entire phone. And while the 'sexyness' is a huge factor, I am more concerned about keeping the phone completely protected. Cuz I'd be devastated if anything ever happened to my baby. lol.
Keep the suggestions coming!
Jamie
see my thread:
http://forum.xda-developers.com/showthread.php?t=1096459
i think these will be the best, D3O FTW
mucury case?
Has anyone had any experience with these?
It's called the "Mucury" case, I can only find it on ebay.
http://cgi.ebay.ca/i9100-samsung-ga...Accessories&hash=item2a10785213#ht_3691wt_957
Is it a good quality case? i.e. will it protect the phone from a fall at waist height?
Jamie
bassmonkey said:
I've got the casemate tough n it is nice, stops dust n grease, would defiantly protect from a fall. However the phone gets stupidly hot n stays hot for ages. Just ordered a mesh case to see how that goes
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Got mesh case, now back using the case mate tough. Not sure what the mesh cases point is, top n bottom completely exposed, its a dust magnet. My phone dropped from the arm of the sofa and it came clean off. I suppose it does look nice but if that's the main concern and you're not bothered about the non protection it provides you may as well not have a case. That's just my opinion anyway
Sent from my GT-I9100 using XDA Premium App
bassmonkey said:
Got mesh case, now back using the case mate tough. Not sure what the mesh cases point is, top n bottom completely exposed, its a dust magnet. My phone dropped from the arm of the sofa and it came clean off. I suppose it does look nice but if that's the main concern and you're not bothered about the non protection it provides you may as well not have a case. That's just my opinion anyway
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thanks for writing that - I dropped my phone last night indoors on a carpet, and I've always used the mesh case - but it popped straight off and the phone and the case were about a meter apart when they settled.... (phone was fine btw). It got me thinking if I dropped that on concrete or something it'd be pretty badly damaged!
Was looking at the case mate tough - and it's not till I just read your post now that it's convinced me to get one!
Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks
Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!
You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too
Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap
How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.
I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.
ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.
is it easy to take it in and out of your pant pocket
denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:
dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.
Looking for the best case to show off the Moto X, so I'm trying to find the thinnest clear (not frost!) case out there. Not worried about drops, just want basic scratch and scuff protection.
For reference, I have the Diztronic TPU clear case and the Minisuit clear case, but am looking for something more minimalist that will LEAST change the look of a naked X. Has anyone seen such a case?
I have the clear power support air jacket case. It's kinda expensive but it's thin & it has some sort of self healing coating that heals scratches. The only downside is that it makes your phone slippery.
I bought the Griffin Reveal Case. It has the clear back and is pretty thin. It's hard plastic with a softer rubber around the edge. The back scratches fairly easy, but I do not see them unless I take the case off and look for them. I had read this in reviews, but I'll live with it for the $12.50 I paid from their ebay store (price is higher now on ebay, though cheaper than amazon with shipping).
Ebay link
or
Amazon
I originally had a clear diztronic tpu case, which added a lot of bulk IMO. The Reveal case keeps more of the original feel of the phone.
Mayze23 said:
I have the clear power support air jacket case. It's kinda expensive but it's thin & it has some sort of self healing coating that heals scratches. The only downside is that it makes your phone slippery.
Click to expand...
Click to collapse
do the scratches actually "heal"? I'm getting this case tomorrow, I'm undecided if I want to keep it or get another one...
I haven't scratched it on purpose to see but I've used it for a couple of weeks now and there are no visible scratches.
Mayze23 said:
I haven't scratched it on purpose to see but I've used it for a couple of weeks now and there are no visible scratches.
Click to expand...
Click to collapse
Same here. Been using it 2-3 weeks and there are zero scratches.
I have found, like others have said, that it is very hard to get off. It's a breeze to get on though.
Are there any truly transparent TPU cases? The Diztronic is frosted
Rocketfish TPU Case from BestBuy
What you need is the Rocketfish TPU case from BestBuy. It's what I've been using from day 1 of owning my Moto X, and it's pretty fantastic. 100% clear all round, and great to the touch. Covers the buttons as well, and has a good lip around the edges so you can put it face down. Go for it, you won't be disappointed. I'm surprised this case doesn't get as much publicity around here as it should.
http://www.bestbuy.com/site/soft-sh...&skuId=1645012&st=rocketfish moto x&cp=1&lp=1
I've been using the AirJacket for a while and really like it. As others have said, no visible scratches, good protection, and it doesn't feel particularly slippery to me. Also doesn't add much bulk. I don't like what it does to the feel of the buttons. Where before they were good and "clicky", now it's mushy, hard to press, and doesn't always respond. I've taken to pressing on them horizontally with my thumbnail instead. Could be I've had bad luck with mine, but I have been tempted to try modifying the buttons (scraping away some rubber to thin them out).
Hey guys!
Now I'm waiting for my walnut Moto X and trying to choose between Rocketfish TPU case and Air Jacket by Powersupport. Price doesn't matter on me. Understood from forums that air jacket has some self-healing coatin and dunno abt same issue in Rocketfish case.
What you guys think about it? What case might be your choise?
Thanks beforehand.
I think the two tone air jacket is not very appealing but it's all personal taste. If the rocket fish is like the diztronic but clear I'd go with that
tgerbracht said:
I think the two tone air jacket is not very appealing but it's all personal taste. If the rocket fish is like the diztronic but clear I'd go with that
Click to expand...
Click to collapse
Thanks for feedback!)
Already ordered air jacket + non-glair film. Will make photoes upon delivery
I got a LUVVITT from amazon. TPU sides and Polycarbonite clear back.
I like it so far. It does seem to show minor scuff and scratches on the back though.
samarth1 said:
What you need is the Rocketfish TPU case from BestBuy. It's what I've been using from day 1 of owning my Moto X, and it's pretty fantastic. 100% clear all round, and great to the touch. Covers the buttons as well, and has a good lip around the edges so you can put it face down. Go for it, you won't be disappointed. I'm surprised this case doesn't get as much publicity around here as it should.
http://www.bestbuy.com/site/soft-sh...&skuId=1645012&st=rocketfish moto x&cp=1&lp=1
Click to expand...
Click to collapse
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
yamaha83 said:
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
Click to expand...
Click to collapse
Thank you. The buttons are hard to press as well. I will return it tomorrow. I will probably go naked.
Sent from my Nexus 7 using Tapatalk
yamaha83 said:
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
Click to expand...
Click to collapse
You know I thought it was my eyes--mine seems to be looking a bit yellow too! Nice to see someone else has the problem and I am not seeing things. Dang it, I like this case too... Maybe I will try to soak it in something...like oxyclean or I don't know... something! If I am able to remove my yellowness I'll report back!
Please do
The rocket fish case looks great, the buttons are a bit stiff and it is relatively expensive from best buy. Still, it's the best truly clear case I've found.
styndall said:
You know I thought it was my eyes--mine seems to be looking a bit yellow too! Nice to see someone else has the problem and I am not seeing things. Dang it, I like this case too... Maybe I will try to soak it in something...like oxyclean or I don't know... something! If I am able to remove my yellowness I'll report back!
Click to expand...
Click to collapse
Good luck, but don't be hopeful. I've had clear TPU yellow before. I think it's a chemical reaction from either light exposure or skin oils. I tried everything and it doesn't 'clean' up at all.
Got my Poetic Affinity Case in today and figured I'd write a quick review. These poetic cases are very similar to UAG in looks and design but for 1/3 of the price. They are single peice hard poly carbonate and very ridged. Overall a nice design with a clear back to show off the beauty of your aluminum backed phone, offer a nice lip around screen for medium drop protection. My only issue is that the buttons are a little stiff but I suspect they will break in over time. I'm satisfied with my purchase and feel like it was a really good deal at around $10. It plays well with my spigen crystal screen protector and offers a good grip and feel in hand. If you guys have any questions feel free to ask. Sorry for the quality of the pics all I has was an s3 to take them.
how is the grip on it?
I had the Spigen Bumper Premium and it was still too slick for me..
Right now i have this case.. Zizo armor.. Super grippy.. but had to modify the power opening.. plus it squares off the phone and doesn't really show the HTC Beauty..
i got a Poetic Affinity case, it's a PIA to take it off if you want to, after the second time i took it off never put it on again, using Orzly FlexiCase now
codeglitch said:
i got a Poetic Affinity case, it's a PIA to take it off if you want to,
Click to expand...
Click to collapse
so other than it was hard to get off.. did you like the case? grip? feel? look?
Jaws4God said:
so other than it was hard to get off.. did you like the case? grip? feel? look?
Click to expand...
Click to collapse
in all honesty the case looks and feels good, great grip, my 2 issues with it was the taking it off because its harder "plastic", and the other issue was that the case doesn't exactly fit on top of the back of the phone, so it gets a lot of dust under there and you're gonna want to clean it.
If you can manage to take it off better than i could i would recommend the case, makes the phone a lite more bulkier but shouldn't be a problem, it wasn't for me.
I just got the Spigen rugged armor today, it's really great too, using it now!
IMO:
Poetic: good protection and good looks, still showing off your metal
Spigen Armor: good protection and good looks, no metal show off
Orzly crystal: not as good protection (thinner) but still good, and very transparent
Sorry for mentioning other cases on this thread but those are the 3 i got and i can give my opinion on
codeglitch said:
in all honesty the case looks and feels good, great grip, my 2 issues with it was the taking it off because its harder "plastic", and the other issue was that the case doesn't exactly fit on top of the back of the phone, so it gets a lot of dust under there and you're gonna want to clean it.
If you can manage to take it off better than i could i would recommend the case, makes the phone a lite more bulkier but shouldn't be a problem, it wasn't for me.
I just got the Spigen rugged armor today, it's really great too, using it now!
IMO:
Poetic: good protection and good looks, still showing off your metal
Spigen Armor: good protection and good looks, no metal show off [emoji14]
Orzly crystal: not as good protection (thinner) but still good, and very transparent
Sorry for mentioning other cases on this thread but those are the 3 i got and i can give my opinion on
Click to expand...
Click to collapse
no problem. i already ordered the poetic. looks like it should arrive monday.. just hoping its a great case for me.. im very picky lol
Sent from my HTC6545LVW using Tapatalk
well my case came today...
First Impressions:
Good:
1. Case feels premium.
2. Phone has great grip and texture.
3. Cutout for charger seems to be large enough for all my chargers, but will test more later.
4. Clear plastic is thick and doesn't have any tinting.
5. Cutouts for camera and speakers and mics seem perfect.
6. Buttons work great and have grip on them.
Bad:
1. Headphone cutout is small, should work for standard headphone plugs, but for a computer speaker plug in, it will not fit.. i may need to modify.
It will be interesting to see how the case does after a few days of testing... hopefully it will hold up as I really like the style and feel.
Thank you.
Shadows?
Came across this case the other day in my internet travels looking for something similar to my Supcase Unicorn Beetle Hybrid for my M8. The only case SC has for the 10 looks like a gawd damn brick. Ok for some, just not me. So, my question is, can anyone please confirm whether photos taken in this case cause any kind of blur, or shadow, from the cut out. I'm not talking about the known issues with lens flare here too, just to clarify. I've never owned a clear case but have heard of some that do cause a shadow (I am assuming a reflection from flash off the clear cut out).
Cheers.
Sc0ttyP said:
Came across this case the other day in my internet travels looking for something similar to my Supcase Unicorn Beetle Hybrid for my M8. The only case SC has for the 10 looks like a gawd damn brick. Ok for some, just not me. So, my question is, can anyone please confirm whether photos taken in this case cause any kind of blur, or shadow, from the cut out. I'm not talking about the known issues with lens flare here too, just to clarify. I've never owned a clear case but have heard of some that do cause a shadow (I am assuming a reflection from flash off the clear cut out).
Cheers.
Click to expand...
Click to collapse
since they are completely cut out, should not have any interference.
Sent from my HTC6545LVW using Tapatalk
Jaws4God said:
since they are completely cut out, should not have any interference.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
Ok. So, photos all good then?
Sc0ttyP said:
Ok. So, photos all good then?
Click to expand...
Click to collapse
yep, should be no issues..
see attached picture. cutout is d
clearly around camera, flash and Laser focus..
Sent from my HTC6545LVW using Tapatalk
Rightyo, and still thumbs up on the case?
Sc0ttyP said:
Rightyo, and still thumbs up on the case?
Click to expand...
Click to collapse
only complaint after 1 day use was the headphone plug too small for the larger plugs.. like for computer speakers.. so i used a round file and widened it..
so now its perfect.. great grip. love how it shows off the phone.. slim and shaped like phone.
Sent from my HTC6545LVW using Tapatalk
Jaws4God said:
only complaint after 1 day use was the headphone plug too small for the larger plugs ... slim and shaped like phone.
Click to expand...
Click to collapse
That's exactly what i'm looking for. Thanks for the replies J4G, and the review.
Hey man, I was just about to purchase from Amazon, thought i'd read through some of the reviews and some people are advising where the camera cut out is, the case sits up off the phone a little (i.e. not flush with phone), allowing debris in through the cut out. Looks flush from your last pic. Is this true?? I really don't mean to sound pedantic want to make sure I'm happy with case before I pull the trigger cause there's none to be found in Oz and I don't want to have screw around with returns.
Sc0ttyP said:
Hey man, I was just about to purchase from Amazon, thought i'd read through some of the reviews and some people are advising where the camera cut out is, the case sits up off the phone a little (i.e. not flush with phone), allowing debris in through the cut out. Looks flush from your last pic. Is this true?? I really don't mean to sound pedantic want to make sure I'm happy with case before I pull the trigger cause there's none to be found in Oz and I don't want to have screw around with returns.
Click to expand...
Click to collapse
from what i can see, that does appear true... I haven't seen much dust and debris get in there.. however i have only had it on a few days. :silly:
I will say that a lot of people said they are a pain to get off.. however I can attest that mine is like any other case.. it does hold on well, but just peel back a corner and then work on another corner, it pops right out.. so should be easy to clean..
Just received some of the Clear X-Level TPU case I found and ordered, it is .78mm with clear matte edges all around that feel great in hand.
https://photos.app.goo.gl/YNDccnTmGaIv250z1
The case is similar to the 'MNML' case in that it does not provide a lip for the screen, but it does hug the screens curves to provide a bit more protection in case of accidental drops since it is made of TPU. Dont get me wrong, it is not not a drop proof case at all, but even thin TPU material can absorb more of an impact than hard plastic, and with a good screen protector you're set. The camera is also ever so recessed enough that it wont hit flat surfaces when placed on them. The buttons are also feel great and tactile.
The only thing that may bother some, but doesn't bother me since it isnt that noticeable from afar, is that even though it has the "dot buffer" most clear tpu cases have, it still shows some "water markings" where the case meets the back glass. This is likely because of how thin the case is, and how the back glass curves and melts into the 2 XL's corners. The case will also likely yellow and scratch over time, but that is why I got a small supply lol. I'll be able to swap them out as needed since it will be my daily for a while.
(On a side note) If anyone is interested I would also be wiling to sell some of the extra I have. I know it sounds like an ad for me to sell... but I just feel I got more than I needed.. and it seems these are hard to get in the US for some reason. So if you are just let me know, id do $12 shipped, first class, US. If you want more than one Id do a deal cause of shipping as well! If I have more than one left i want to sell that is lol
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
scottjal said:
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
Click to expand...
Click to collapse
It actually does. The L&K is about as thick as the Ringke Bevel. I had the "Pleson" version of it (theyre both the same just rebranded) and that is how thick it felt. The X-Level is .78mm thin.
Have a link for where you got it?
Sent from my iPhone using Tapatalk
zaydaboss said:
Have a link for where you got it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Nocturnal86 said:
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Click to expand...
Click to collapse
Check your PayPal
zaydaboss said:
Check your PayPal
Click to expand...
Click to collapse
Check your PM's, need your address
Nocturnal86 said:
Check your PM's, need your address
Click to expand...
Click to collapse
Loving this case. Was concerned it would crack like the mnml ones it's tpu so that won't be a issue this will keep me from going commando I hate cases
You have a spare case to sell me?
rfuser said:
You have a spare case to sell me?
Click to expand...
Click to collapse
Just saw this, sent you a PM
What about sending one up north to Canada, eh?
evanwier said:
What about sending one up north to Canada, eh?
Click to expand...
Click to collapse
If you pay for shipping along with the case lol
eBay got the hook-up: https://www.ebay.com/itm/X-Level-Pu...-Slim-Armor-Clear-Soft-TPU-Cover/222698641914
It took 23 days to reach me in Los Angeles from China.
Just got mine yesterday and I love it. I've been on the hunt for a good clear case to show off the phone. I first had the Spigen Liquid Crystal but it added a bit too much bulk for my liking. This one is just thick enough to protect the rear camera lens when the device is resting face-up. My only complaints are that:
1. there is no lip to protect the screen if I want to set the phone face-down (seems to be common amongst slim cases), and
2. the cut-outs are a bit sharp from being unfinished (though really this is not a big deal for me).
The fingerprint reader cut-out is a bit off-center but at a glance it isn't noticeable for me.
Unfortunately after some time (2 weeks) case has weird bluish discoloration.
I'm assuming this came from holding my phone in pocket (jeans).
I have also Ringke clear case and same story, same discoloration.
been using this for more than half year, same as other tpu case, it will turn yellow as time goes by.