Related
so I just bought the Otterbox Defender for my Atrix 4G, and for some reason, on the top left corner, if I squeeze it, I feel a little give, of maybe like half a millimeter, but IDK if that means its defective or what? Also, whats a good way to clean a screen cloth to get the dust off? I love this thing, and my screen is very clean but there is like one or two small specks of dust I cannot stand looking at.
It will eventually get stretched out more and more as you use it. That's one of the biggest flaws of the Otterbox Defender.
My wife has had it for about a month and she's completely given up on it, as it's almost impossible (for her) to use the fingerprint scanner, and because of how she used to tug on the silicon protecting the charging port, the bottom is all stretched out too. YMMV.
Hope this helps...
_Alex_ said:
It will eventually get stretched out more and more as you use it. That's one of the biggest flaws of the Otterbox Defender.
My wife has had it for about a month and she's completely given up on it, as it's almost impossible (for her) to use the fingerprint scanner, and because of how she used to tug on the silicon protecting the charging port, the bottom is all stretched out too. YMMV.
Hope this helps...
Click to expand...
Click to collapse
whats a better case then? Should I just return this and get the candyshell? I'm actually thinking of just taking the otterbox screen protector off and putting a new one on, I cannot stand to even see a speck of dust under it.
DiamondJay20 said:
whats a better case then? Should I just return this and get the candyshell? I'm actually thinking of just taking the otterbox screen protector off and putting a new one on, I cannot stand to even see a speck of dust under it.
Click to expand...
Click to collapse
@ OP :
Military Grade protection - cheaper than the Otter Defender...
http://www.goballisticcase.com/collections/motorola-atrix
Case demonstration - http://www.youtube.com/user/BallisticOfficialYT#p/u/24/xf0PD8p-pZI
And it doesnt look half bad...
That or the Seido Active Case (which I use currently, in Sapphire Blue)
http://www.seidioonline.com/product-p/csk3mtatr-bl.htm
@ _Alex_ : The second link I posted for the Seidio Active case would suit your wife very well. That case does not hinder the fingerprint scanner at all, and its still offers a reasonably good amount of protection. Its also available with a holster. (I do not have the holster so I can't comment on it) I do love the case though. I've dropped my Atrix twice from about 4ft up (im a big guy, 6'4" tall) onto concrete, once landing on its side, the second face down. No damage to my Atrix at all, barely scratched the silicone skin of the case (its a two piece case, silicone case with a skeletal snap-on piece for extra strength and corner protection).
Honestly I have the defender and love it I use the clip everyday and it has a bit of play like yours but I haven't had any streaching and I've had it for a little over a month. I sometimes gwt trouble with the fingerprint reader but if you dont use it than that dosnt matter but I am defanitly trying out that upcoming ballistics case
Sent from my MB860 using XDA Premium App
I have the defender too. I have the same little problem in the top left corner too! The rubber part hasn't stretched for me, however.
I use the fingerprint scanner, but I don't notice any problems at all when using it.
does anyone know if its easy to cut out their screen protector? Its just that when I use it, I feel like I'm using the Blackberry Storm, like I slightly push more than normal, and it takes away accuracy when typing. Should I keep the Defender or just get the candyshell Speck and a separate screen protector?
I'm on my second silicone part. I emailed them about the port cover corner getting stretched out and they sent me a new one. The new one looks just like the old one already. Took maybe two weeks for it to start popping out again.
DiamondJay20 said:
does anyone know if its easy to cut out their screen protector? Its just that when I use it, I feel like I'm using the Blackberry Storm, like I slightly push more than normal, and it takes away accuracy when typing. Should I keep the Defender or just get the candyshell Speck and a separate screen protector?
Click to expand...
Click to collapse
The protector is just held in place with double stick tape. Just take the case off and push it out from the outside.
barry99705 said:
I'm on my second silicone part. I emailed them about the port cover corner getting stretched out and they sent me a new one. The new one looks just like the old one already. Took maybe two weeks for it to start popping out again.?
Click to expand...
Click to collapse
I called them about my silicone case stretching and they sent me a new one as well.. still haven't put the new one on yet. Wife called about the "watermark" she is getting on her screen, and found out it is because they put the screen protector on backwards(her screen protector feels more rough than mine).. so they are sending her two stick on screen protectors. May have to try and just pop out her screen protector and flip it over?
bamastang said:
I called them about my silicone case stretching and they sent me a new one as well.. still haven't put the new one on yet. Wife called about the "watermark" she is getting on her screen, and found out it is because they put the screen protector on backwards(her screen protector feels more rough than mine).. so they are sending her two stick on screen protectors. May have to try and just pop out her screen protector and flip it over?
Click to expand...
Click to collapse
Go on YouTube and look at http://www.youtube.com/watch?v=XzHnvjc_-30 for the candy shell and http://www.youtube.com/watch?v=FmaW5bPuxFw&feature=channel_video_title for the Defender and you'll see that they're as good as each other...I just exchanged for the Speck and got a screen protector for the exact same price (minus one cent) and couldn't be happier! It feels much better, you can actually feel vibration, looks better, and is just as protected.
otter box commuter > defender.
foreverzero89 said:
otter box commuter > defender.
Click to expand...
Click to collapse
Defender is still good, just don't make my mistake by getting the Impact.
The Impact is a $20 Glorified Gel Skin Piece of Crap! (Seriously it's just a gel skin)
If I saved 1 person $20, I'm happy...
jgc121 said:
@ OP :
@ _Alex_ : The second link I posted for the Seidio Active case would suit your wife very well. That case does not hinder the fingerprint scanner at all, and its still offers a reasonably good amount of protection. Its also available with a holster. (I do not have the holster so I can't comment on it) I do love the case though. I've dropped my Atrix twice from about 4ft up (im a big guy, 6'4" tall) onto concrete, once landing on its side, the second face down. No damage to my Atrix at all, barely scratched the silicone skin of the case (its a two piece case, silicone case with a skeletal snap-on piece for extra strength and corner protection).
Click to expand...
Click to collapse
She has my Otterbox Commuter now which is similar to the Seidio Active case. I've switched over to nothing while I debate using a TPU or a Incipio Feather, as I have a lapdock now and the Commuter is just too big to fit...
I read somewhere you can remove a plate or something on the laptop dock to make extra room. I might have been seeing things though
Sent from my MB860 using XDA Premium App
ccrows said:
Defender is still good, just don't make my mistake by getting the Impact.
The Impact is a $20 Glorified Gel Skin Piece of Crap! (Seriously it's just a gel skin)
If I saved 1 person $20, I'm happy...
Click to expand...
Click to collapse
Right it doesn't even fit right fills loose ...I love the defender
Sent from my MB860 using XDA App
Ugh my defenders head phone door came off the phone recently just a confirmation of this problem sadly i would have thought it would have happened to the usb flap first being that i dont use headphones that often. I dont know if i should try to get them to send be a new silicon part out now that I got a body glove case today Seems to be a good alternative to this the grip on the case is nice and theres an option to have aclip on the back for a belt clip that comes with it Witch would be good if you used the Defender holster but you can replace the clip with circle shaped peace that finishes the case only thing that might be bad is there is no protection for the ports. I will say that it being all in one layer unlike the plastic and silicon on the defender means that there is no creekiness that i some time felt on my defender. it setill clips together on the front and back similar to the defender plastic layer though without a built in screen protector.
if anyone is looking for one. http://forum.xda-developers.com/showthread.php?t=1154013
Do all silicon cases when you put it in your pocket the screen collects a lot more dust and lint around the phone where the case meets the bezel?
I got this case from Verizon wireless, i think it the high gloss one.
I love the case because it fits perfectly doesn't make the phone too big. While not sure how well it will protect if i drop it, the biggest plus is, it gives me a better grip and does not slide out of hand so i will not drop it.
Every time I pull the phone out of pocket has tons of dust and lint and so hard to clean without taking the case off.
So I am curious anyone have any recommendations for a similar silicon case that will not attract all that dust while in the pocket?
Thanks
I have the same case and don't really have an issue. Maybe you should put a canned air in your other pocket to blow it off each time you pull it out. ^_^
Sent from my Galaxy Nexus using xda premium
I have a S-line TPU case from ebay, I find a lot of dust and fluff sticking to the edges in my pocket, but it doesn't bother me, maybe I just have really dirty pockets!
Yeah, I get a lot of dust and lint in there too. I use the amzer case with the Verizon screen protectors.
Sent from my GSM Galaxy Nexus using Tapatalk
Interesting thing is if I go naked with nexus it does not attract much dust.
Something to do with the silicon.
Sent from my Galaxy Nexus using Tapatalk
Should avoid silicone cases. They are dust magnets and will start stretching soon. Tpu's are way better and cost the same.
Sent from my Nexus in Texas.
@rbiter said:
Should avoid silicone cases. They are dust magnets and will start stretching soon. Tpu's are way better and cost the same.
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Thanks any recommendation which one?
I never heard of TPU that is new to me. What does that stand for?
Maybe I will return this case since it was $24.99
TPU wikipedia link, fantastic material! Plenty of cases on eBay for only a few pounds!
@rbiter said:
Should avoid silicone cases.
Click to expand...
Click to collapse
Very much so. Silicone is always a lint magnet especially if you pocket your phone.
I got myself the Barely There Case in black by Case-Mate. Was about to get the Otterbox Commuter but was worried that it would make the phone too big to hold with one hand.
Thanks everyone I went for one of the TPU forgot name starts with a D, rev 3..for I think $10 off amazon.
Will return this one at verizon once I get it
I use the Verizon silicon case too and found the same issue. Thats why I empty out my jacket's pocket completely before putting my phone in.
All the Same
I find the TPU cases to be nearly as good at concentrating dust on screens as silicone. It seems more a function of the protective lip protruding around the edge of the screen than the material it's made of. A dirty phone is just the price one pays for trying to protect it.
Hi,
Does anybody knows what is the bulk/size difference between the 2 cases?
same with trident aegis.
I bought my bro the commuter, but the store didnt have the defender to feel.
I think that the commuter is slick and nice, and hope the the defender is doing so as well.
Thanks!
BADtoBONE said:
Hi,
Does anybody knows what is the bulk/size difference between the 2 cases?
same with trident aegis.
I bought my bro the commuter, but the store didnt have the defender to feel.
I think that the commuter is slick and nice, and hope the the defender is doing so as well.
Thanks!
Click to expand...
Click to collapse
I have the defender case and I love it. It does add bulk to the phone. It actually makes the phone look huge, but I love it. It feels save and secure. I feel like if I were to drop my phone 5 feet down onto concrete, my phone would be fine. If you like the slick feel of the commuter, then I suggest you stay with that case. :good:
I have the commuter and I have to say that I love it and after dropping my phone from shoulder height which is prob around 5 ft high I can honestly say that this case does a great job protecting the phone.
A second thought is that there are cases like the commuter series that have a stand clip. Which is great if your going to use your phone as a media device. my sister just got the casemate pop which looks awesome.
Sent from my SCH-I535 using xda app-developers app
ergibson83 said:
I have the defender case and I love it. It does add bulk to the phone. It actually makes the phone look huge, but I love it. It feels save and secure. I feel like if I were to drop my phone 5 feet down onto concrete, my phone would be fine. If you like the slick feel of the commuter, then I suggest you stay with that case. :good:
Click to expand...
Click to collapse
I use a generic very bulky case right now.
I dont care about thickness, and i ment slickness - i like the feel of the material in the commuter.
anyway, what is the size difference between them?
The size difference is not much. I have both cases. I am no longer using the Commuter case because the back is hard plastic and very slippery. The button plastic is very hard. I use the Defender case now because the silicone cover give me a better gripe and buttons are easy to press.
Sent from my SGH-I747 using xda premium
Thanks, thats basically the answer i was looking for.
what is you opinion regarding the plastic screen protector compared to a sticker?
It's not bad, it will probably protect it better but isn't optically as good as a high end shield.
Sent from my SPH-L710 using Tapatalk 2
contradude said:
It's not bad, it will probably protect it better but isn't optically as good as a high end shield.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
such as?
zagg shields are the typical goto screen protector.... There are cheaper ones, but you typically get what you pay for.
Commuter: 5.61 in x 3.10 in x 0.56 in / 142.5 mm x 78.84 mm x 14.28 mm
Defender: 5.88 in x 3.47 in x 1.41 in / 148.84 mm x 88.14 mm x 35.81 mm
Hey badtobone. I'll give you my experiences with the cases i've bought and the zagg shield cover i purchased. At first i had a tpu case with the zagg shield and the corners started coming up where the tpu case would rub on it. Scratch that idea. Then i bought the casemate phantom. The screen protector for the case pops on the front of the phone and then you cram the phone inside the outer shell of the case. Snapped the screen protector part putting the phone in the case one day and to boot the case is huge compared to the defender series but it was on backorder of course and i couldn't wait. So scratch that idea. I've always been an otterbox fan so i was finally able to order the defender for it. Awesome to a point. The case is somewhat smaller than the phantom which is awesome and great protection but i just don't like the screen protector. I've always liked the commuter cases screen protector because it was crystal clear on my other galaxy s phones and you can appreciate the screen more. If otterbox still offers the seperate screen protector for the commuter i'll probably use that along with the defender for the ultimate case. Just my 2 cents. Hope i could help.
Sent from my GT-I9300 using Tapatalk 2
I've never had an otterbox before a few days ago, but went with the defender model.
For previous Androids i've gone with the trident cases, and like them. The ones i've had are not comparable to the defender version of the otterbox, but i'll say now that any non-slide phone in the future for me will take into consideration defender case availability as part of the purchase decision.
It just feels safe now, the device.
Some things that could be better - the trident cases I've used have covers for speaker/mic with a filter behind to keep the dust out. This is decidedly lacking on the otterbox.
The holster is awesome, though. It's like the final stage of usefulness/protection. It makes a hard plastic shield over the screen and is an extra structural reinforcement of the protection level to the device.
Already i've turned it around in the holster, screen out, and clipped it to my visor in my car. Improv GPS mount.
In the same way you can just put something in the clip for back support and have a desk/tabletop mount for the device anywhere. Sitting in a hotel room watching a movie off the nightstand is much easier with this case.
My first impression of the clip on the holster was to cut it off and make a smooth outer shell for pocket carry. I may very well buy another case to try this out. The clip being on the case has literally proven it's case not to be cut off by how immediately useful it's been.
Another drawback, my only other complaint, the built-in screen protector.
Here again is another reason to buy a second case. Beyond trying it out without the belt clip, is trying it out without the screen protector.
I've seen a lot of threads where people mention cutting the on-board screen protector out of the defender with an xacto knife or something. Owning one, I now see why. I sit here debating the ramifications of the overall case structure if I do cut it out, because I would very much like to.
The silicon shell should still hold the case together, as well as the clips underneath that hold the case together, but I do worry about separation of the front of the case to the sides without the screen protector to hold them together. Especially given the holster clip will encourage that separation through use.
When the phone came in at the verizon store, I made sure that the first thing done to the device was to put a screen protector on it. Few days later I got the otterbox. It's whole life after unboxing, it's had a screen protector adhered to it's face. That part is important, as the otterbox screen protector just sits on the face, not adhered to it. This, to me, is an unacceptable level of compromise in protection of the device.
Without being adhered, the screen is subject to dust and oils getting between the screen protector and the screen itself. Once that happens, you are looking at the overlaid 'protector' acting like a piece of sandpaper with the dirt under it every time you touch it.
All in all, I can't see myself using anything but a defender to protect the SGSIII - a few slight modifications to the case and I will be completely satisfied.
I never played with a commuter model, but here are some thoughts on the defender.
Blue6IX said:
Another drawback, my only other complaint, the built-in screen protector.
Here again is another reason to buy a second case. Beyond trying it out without the belt clip, is trying it out without the screen protector.
I've seen a lot of threads where people mention cutting the on-board screen protector out of the defender with an xacto knife or something. Owning one, I now see why. I sit here debating the ramifications of the overall case structure if I do cut it out, because I would very much like to.
When the phone came in at the verizon store, I made sure that the first thing done to the device was to put a screen protector on it. Few days later I got the otterbox. It's whole life after unboxing, it's had a screen protector adhered to it's face. That part is important, as the otterbox screen protector just sits on the face, not adhered to it. This, to me, is an unacceptable level of compromise in protection of the device.
Without being adhered, the screen is subject to dust and oils getting between the screen protector and the screen itself. Once that happens, you are looking at the overlaid 'protector' acting like a piece of sandpaper with the dirt under it every time you touch it.
Click to expand...
Click to collapse
You don't need an xacto knife to remove the built-in screen protector. The screen is adhered to the case by a strip of removable glue. Just push the screen protector in with a little force and it pops right off. You can then remove the glue around the edges by simply pulling the one long strip up around the edge.
The built-in screen protector does suck. It makes the screen very pixalated and dust does get trapped under the screen protector.
Try this out... Remove the built-in screen protector and buy a best skin ever wet protector. Apply that wet protector, let it dry completely, now place you defender case (with built-in protector removed) on the phone. This is the setup I have and it is absolutely perfect. I promise you'll love this setup. I'm extremely anal about my screen protector and case combinations for my phones and I've tried 5 different combinations before going with the BSE/defender combination. Trust me, it doesn't get better than this combination. My screen quality is perfect and my phone is secure and safe.
Sent from my SGH-T999 using xda app-developers app
Thanks to all the repliers!
so buying the case knowing that youre gonna take of the screen might be a good idea?
anl links or clips from people who did it?
anything in youtube?
BADtoBONE said:
Thanks to all the repliers!
so buying the case knowing that youre gonna take of the screen might be a good idea?
anl links or clips from people who did it?
anything in youtube?
Click to expand...
Click to collapse
You don't need any videos or anything. All you're gonna need to do is pop the screen protector off by pushing it away from the case. It's actually really simple and doesn't require much effort at all. U won't break the case doing it. Just know that once u remove the screen protector, you can't reapply it. So u may want to see what the screen clarity looks like before removing the built in screen protector. You may think the screen quality is ok with it.
Sent from my SGH-T999 using xda app-developers app
had a chance to check out both the other day.
imo there's no real comparison between the two..and the commuter is almost useless to choose over the defender
its harder to take the commuter on and off imo...
it doesn't feel as nice as the defender..and its slippery..
the buttons are hard to press.... no where near impossible or anything like anyone really says when they complain but it's definitely not convenient and its fairly annoying...I actually had the phone try to slip out of my hand a few times while squeezing the phone to press the buttons.
and....the defender for the SG3 isn't as big as you'd think it is (especially in comparison to the commuter)
best part....the silicone otterbox uses on there defender has always been my main complaint...but they've used some stiffer stuff, doesn't flop off at all (or really stretch like at all) and it doesn't feel like it will collect a ton of lint or snag too much coming out of a pocket. It's just the right amount of grip
Can anyone post pic of the 'improved' defender (without plastic screen)?
I am loving my commuter. Buttons are fine for me even the power being hard to press Is not a deal breaker. My main gripe is screen protectors seem to be an issue if they are full like the curved crystal. Lesson learned, I am going to try the one that came with the case today.
Sent from my SPH-L710
alexyaz said:
I have the commuter and I have to say that I love it and after dropping my phone from shoulder height which is prob around 5 ft high I can honestly say that this case does a great job protecting the phone.
Click to expand...
Click to collapse
Definitely. I was thinking of getting a thinner case, but I drop my phone often enough that Commuter is worth it. I have the green one and I imagine it can get quite dirty in the future.
Buttons are definitely hard to press, but I can get used to it I guess. Definitely worth it for the protection alone.
BADtoBONE said:
Can anyone post pic of the 'improved' defender (without plastic screen)?
Click to expand...
Click to collapse
It looks exactly like the defender.. Just without the plastic screen protector. Think of it as a window with no glass. The window will still look the same, it just has no glass. U will be using a wet screen protector instead of the builtin screen protector.
Sent from my SGH-T999 using xda app-developers app
hi guys
i have been comparing these two products for a quite some time and i cannot give my final decision to which product should i buy. i am looking for a case that has a front face cover. and i found the ballistic maxx and otterbox defender. but what makes me think twice between these product is the comes with screen protector. these protector is quite think and most likely it will ruin the colors of my S3's screen. i have seen it in some product reviews posted by youtube users. the screen becomes glary. and the second thing that makes me think twice is, if i remove the screen protector, will my S3 shake around inside the case if i dont use the screen protector?
i tried contacting the customer support of otterbox they said they cannot answer my concern. and for ballistic they told me i can still use the case even if i dont use the screen protector, but i still do not understand what they really meant. and they did not gave me a straight answer to my question on what will really happen if i did not use their product's screen protector.
now i would like to ask your personal opinion about these two products, which is better? and if you guys did not use the comes with screen protector will your S3 shake around inside the case? and lastly i am just looking for a case that has a front cover. i dont really like the flip cover cases.
thanks
From what I read about the defender taking out the screen protector does not affect the snugg-ness of the phone and case.
I have the trident kraken that came with a removable screen protector, that I decided but to use.
Sent from Pluto.
I know how you feel, i looked at both those cases and went with the Trident Kraken. Provides the same level of protection and the kickstand is a bonus. Second choice would be the otterbox.
Sent from my SPH-L710 using Tapatalk 2
I personally hated the otter box, sold it as soon as I got the chance. I kept the maxx and it's the case I go for when I need a holster.
I took the screen protector off of my defender with no fit issues. I stopped using it because it squeeks so much. When you hold the phone. This may be due to extra flexing from the removed screen protector as it is rigid and glued in.
The otterbox is an awesome case, the only thing I hate is that the outer silicone layer always stretches out. The defender for my GS3 streched out after 2 months...
Sent from my SCH-I535
ricktat said:
I took the screen protector off of my defender with no fit issues. I stopped using it because it squeeks so much. When you hold the phone. This may be due to extra flexing from the removed screen protector as it is rigid and glued in.
Click to expand...
Click to collapse
I think it's just the case in general. My screen protector is still in tact and it squeaks like no other.
I'm tempted to get a new case, but can't decide. I've narrowed it down to the SG MAXX, Commuter, Kraken, PX260, and the Dualtek.
owlchemist said:
I think it's just the case in general. My screen protector is still in tact and it squeaks like no other.
I'm tempted to get a new case, but can't decide. I've narrowed it down to the SG MAXX, Commuter, Kraken, PX260, and the Dualtek.
Click to expand...
Click to collapse
I got the dualtek case yesterday, it's a really nice case. I just wish there was a compatible holster for it.
Sent from my SCH-I535
I have both cases mentioned in OP. The included screen covers are garbage. Make the screen look like crap plus particles such as sand, dirt (I am in construction field) and so on can get behind protector and scratch screen.
Standard zagg and otterbox working well for me. Zagg HD seemed to thin and marked up easy om my pocket. Otter box laps over the edge of the zagg, which so far has kept the edge from peeling on me which is a common problem for me and my use.
Ballastic has great rubber corners for drop protection but the otter box is easier to slip in and out of pocket and my preferred case.
Sent from my SPH-L710 using xda premium
naturecannon said:
I have both cases mentioned in OP. The included screen covers are garbage. Make the screen look like crap plus particles such as sand, dirt (I am in construction field) and so on can get behind protector and scratch screen.
Standard zagg and otterbox working well for me. Zagg HD seemed to thin and marked up easy om my pocket. Otter box laps over the edge of the zagg, which so far has kept the edge from peeling on me which is a common problem for me and my use.
Ballastic has great rubber corners for drop protection but the otter box is easier to slip in and out of pocket and my preferred case.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I also have both cases described in OP and have to agree to a point, the screen protectors make the screen look terrible. I went with the Ballistic for a couple reasons. 1. The Ballistic seems to slide in and out of my pocket easier (probably because it has more smooth surface than the Defender). 2. The belt clip seems more comfortable to me. The Defender belt clip seemed to sit higher on me which would gouge my hip. Not cool. 3. I got the Defender used when I bought my phone and the rubber on it seems a little loose. I don't think this will happen with the Ballistic mainly because my wife has one on her Note and it's help up extremly well. 3. I got my Ballistic Maxx on ebay for $30 in the color I wanted and I thought that was a good price. Now I need to ditch this screen protector and get a nice one.
I too have both cases. I did/don't use any of the screen protectors that came with it. As for OP, it really depends what you're trying to get out of it. What's your average day like? do you work in an office? go to school? work in construction? I am a process engineer and i'm in and out of food plants and i pull my phone out to snap pictures at least 4 times a day on a daily basis for an hour or so. With that being said I NEED the protection because I have dropped it a few times. I'm currently using the Ballastic without the clip, i just hold it in my pocket. The otterbox is a bit bulkier for me and it slips easy (from hand and in and out of pocket). The ballistic on the other hand, doesn't. It gives you good grip, and isn't a pain for me to pull out of my pockets (i wear dickies for work and rvca romero ii jeans when i'm out and about or jordan basketball shorts when i feel like bumming it). I like the grip because it doesn't slip out of my pockets easily when i wear basketball shorts as the ottorbox did. HOWEVER, be warned that it does pull lint easily. It's not alot where you'll get a hairball when you pull it out of your pockets but it is there. Overall, I'm sticking with the ballastic because it offers great drop protection (as does the OB), but with the corners I personally feel it's more secure and it's not as bulky as people say it is. I'll post up pictures when i get the chance.
Was hoping Some one could point me in the right direction, I was either thinking of getting the otter box defender or the Trident aegis
I'm mainly concerned about dust getting in the phone and it seems like the otter box has good protection but dust seems to find its way in, has anyone had some experience with both cases out can confirm how well the Trident blocks dust?, thanks!
Sent from my XT1034 using xda app-developers app
p00lshark5 said:
Was hoping Some one could point me in the right direction, I was either thinking of getting the otter box defender or the Trident aegis
I'm mainly concerned about dust getting in the phone and it seems like the otter box has good protection but dust seems to find its way in, has anyone had some experience with both cases out can confirm how well the Trident blocks dust?, thanks!
Sent from my XT1034 using xda app-developers app
Click to expand...
Click to collapse
I have Trident Aegis case. Initially, it will collect dust like crazy until the new wears off. Afterwards, its smooth sailing. Check out the threas, "finally found the case for moto g". I posted some pictures there.
Sent from my XT1034 using Tapatalk
zener773 said:
I have Trident Aegis case. Initially, it will collect dust like crazy until the new wears off. Afterwards, its smooth sailing. Check out the threas, "finally found the case for moto g". I posted some pictures there.
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
Yeah I saw your post earlier looks good, but was wondering does dust get under the case? And threw the ports? I'm told otter box is bad for that... I work in very dusty environments so I'm assuming that's the reason why my phone break down in less than a year, anyway would be helpful if I knew before I purchase !
Sent from my XT1034 using xda app-developers app
Well i have the otterbox commuter and its really great protection. And no dust will get in. Because you have to put a screen protector. And the otterbox defender the dust gets inside the protector. But the defender is stronger so idk.
Sent from my XT1034 using XDA Premium 4 mobile app
I took out my Moto g out of its aegis case a few days ago. I didn't find a lot of dust inside. There was some very, very small quantities. I work at a electronics repair shop and there is some dust there. I suppose it could be a problem if someone works in a similar or worse environment.
Sent from my XT1034 using Tapatalk
I started the trident case thread, and for me there is no issue with dust. The trident case gives great protection without the bulk of the otterbox case. But if you plan on dropping it from 30 ft. up........
I have both the Otterbox Commuter and Trident Aegis cases, and I like the Aegis case more. I don't know how Aegis compares to the Defender, but the Commuter is denser and bulkier due to its curved back. Quite a bit of dust gets in around the screen edges since the silicone layer has a looser fit; even the port "doors" collect dust.
The Aegis case is thinner and trickier to put on (all the locks/slots/etc.), but it's been doing a wonderful job of keeping dust away from my device. It also has an additional dust filter on the plastic shell to keep more dust out of the speaker. The silicone layer can be a dust magnet especially by the port flaps, but I haven't found as much dust on my phone compared to when it was in the Commuter. The Commuter's optional screen protector only reaches the top edge of the display, whereas the Aegis's covers the screen with a cutout for the camera/speaker/sensor bits.
Commuter
I've never been a fan of the defender. From a structural point of view, it might offer better protection, but there's something about keeping my phone stuck to hard plastic all the time that gets to me.
It WILL scratch the phone. The commuter has never done that on all my previous phones. Which is why I have it ordered.
I don't know about the trident cases; frankly I'd never heard of them before; but to me, an otterbox is the epitome of main stream good quality and warranty backed cases that do their job 99% of the time, but yes, in a dusty environment, I don't think anything less than a waterproof case would suffice for absolutely ZERO dust.
I am also undecided...Aegis or Commuter.
I like the fact that the Aegis is less bulkier but I saw some negative comments regarding it:
The rubber bits that fit in the headphone and USB plugs don't fit snugly inside the ports and leave space around the rubber body. The plug bits don't stay inside and come out too easily and the space between gets filled with gunk.
Click to expand...
Click to collapse
The only thing that bothers me is the USB/Headphone jack covers have a grab tab to open the covers. This grab tab can snag anything that gets in the way with normal use and expose the ports. That defeats the whole purpose of the covers.
Click to expand...
Click to collapse
The tabs for the silicone that covers the charging port and headphone jack are no longer pulled through the outer shell. To me this feels cheaper and almost negates the purpose of these covers to keep out debris. I can see the headphone silicone tab breaking in the future without this feature.
Click to expand...
Click to collapse
Port covers aren't quite what I expected as they don't seat in place quite like an Otterbox.
Click to expand...
Click to collapse
So what's the difference in bulkiness between the 2?
Also regarding a screen protector, I am looking at Orzly® - Premium Tempered Glass 0.3mm Protective Screen Protector, should I buy it or use a normal one?
ithanium2 said:
I am also undecided...Aegis or Commuter.
I like the fact that the Aegis is less bulkier but I saw some negative comments regarding it:
So what's the difference in bulkiness between the 2?
Also regarding a screen protector, I am looking at Orzly® - Premium Tempered Glass 0.3mm Protective Screen Protector, should I buy it or use a normal one?
Click to expand...
Click to collapse
I have the SAME doubts about that topic! Can anyone clarify us?
anyone?
Ive had both. Not on this phone. But trident is just as good. Id compare it more to the defender series tho. Without as much bulk. It doesnt cover the speaker or camera. But does cover the ports. IMO i like trident better. Protection is closly comparable to the defender. But less bulk/easier to take on and off. I just ordered one off newegg for $19 free shipping. Best deal IMO
Edit: also. In my past experience, skinomi has been the best screen protectors. Completely clear, if applyed correctly you cant even tell its there. Their a bit pricey but worth it
I started off with the Trident. It looked like it could handle the load and the price was right. The Trident profile is trimmer than the commuter and therefore lighter. While I never drop tested the Trident it appears it can handle the shock. The slick hard shell had me concerned about easily dropping the phone. There are tabs on the port covers that after a few pocket pulls will expose ports and cause me to check port covers on every pocket pull. The Trident out does the Commuter in the categories of smaller size and they have a neat dust filter cover over the speaker grill.
But I know Murphy's Law only too well. So I got a commuter. I wish I bought it first. Had one on my first smart phone which passed every abuse test I gave it in 2.5 yrs. The commuter is not as bulky on the G as previous phone. The shell is textured for sure grip. The screen & camera/flash protection is better with the commuter. Tuck and roll port covers for a very streamlined case. The commuter case and gorilla glass gives me enough confidence to leave the screen protector in its wrapping. The commuter costs more but compared to insurance is a better deal. The commuter is my insurance on this Moto G and I feel secure.