Related
Please delete this thread!
I guess nobody can help? I'm really serious here.
my advice regarding roms... just read the sticky threads in the rom sub forum and follow the instructions. Once you flash your first rom you'll realize that the stress was all for nothing. I probably flash a new rom to my phone every week.
Regarding your moisture question. No, holding the phone in your hand wont cause moisture damnage unless you happen to be holding it in your hand under water Keep in mind that the back cases arent exactly air tight so regardless of whether you have the back cover on or not humidity from the air still gets in there.
The battery... It's not meant to just pop out willy nilly. You have to pry it out. If it was loose enough to fall out on its own it would just shake around on the inside of the phone which definatly wouldnt be a good thing.
I know when I put on my case (I have the Tilt 2 so if we ever need to soft reset the phone and want to do it by the red reset button we have to take the case off to do it) there's a good solid click when I press it into place. Especially if I'm putting the back cover on with the stylus still in the phone. These things were designed for that specific reason.... that you know when its closed, hense the click right? Just give'er. You wont break it.
Re: scratched screen.... if you havnt already get some screen protectors from your carrier or off ebay. 5-10 dollars for a pack of 3 or more. You'll notice that with the screen protectors on your screen gets a ton more scratches BUT it will be the protector and not the screen itself. The screen itself has a coating on it that makes it scratch resistent, to an extent. The screen protectors dont really have that BUT they will save the screen from gouges for sure.
As far as cases go I know I had a silicone case for the touch pro and it drove me nuts. To the point where I only used it for a week and took it off. It never seemed to fit right and seemed flakey. A friend of mine bought a hard case for their touch pro 2 at the mall and paid around 20 dollars and its actually a pretty solid looking and feeling thing. To take it off it takes some finesse, like when you want to take the battery out etc, both it did seem like a good investment. I keep my phone in a case on my hip so I wont be getting one but it did look good.
Hope this helps with some of your questions.
Thanks, but still aprehensive towards the rom and battery cover.
Mate, look at it this way, is a phone you're going to use or a decoration/ jewelry...
Whats the point of owning something you are too afraid to use because you could break it. You may as well put it in a vaccuum sealed storage locker and never take it out because the oxygen in the air and the oils and acids on your skin is going to eventually deteriorate the whole thing, will take a few hundred years but you know, better to be safe than sorry....
Lol, that's a good Idea. This has only been since the mysterious incident that required a hard reset.
I've always been against SPs. I know they serve their role, but I believe the Vibrant has held up extremely well for me. Regardless, seeing so many complimentary posts I decided to split the costs with another XDA user and give it a whirl.
Boy am I glad I did. The SP is not visible AT ALL. No bubbles, no change that I can tell in screen clarity, the feel is almost the exact same to my touch, and best of all.... with the SP + Gorilla I really have no worries at all about my screen. I guess in a worst case scenario the SP could get a scratch? Anyone had any issues with this?
Application was super easy. I opted to use a warm shower for humidity and some scotch tape to help apply.... first time trying was perfect. Never had I been able to apply a SP so easily/perfect.
Also, I use the black TMobile case that came on launch date. With this case, it wraps just slightly around the edge of the phone.... well, this is perfect because even if you could see the SP, this case wraps over it. This is flawless. Nobody would ever guess I had a SP.
Those in limbo or feeling good about the Gorilla... take it from someone who used to vocalize those same sentiments, this SP is worth it. Maybe find someone on XDA to help split the costs with you since it comes in a 2 pack.
If you order, you get:
2 SPs
an alcohol wipe
a microfiber cloth
2 strong adhesive tapes (to lift the SP if you do get dust under it)
2 little plastic pieces to smooth out any bubbles
instructions
I think that's all that came in the box... not bad for $11. O, and I got an email saying I should expect it on the 17th.... well, I got it today (11th). Pretty speedy delivery too!
I realize this sounds like an ad... I am not affiliated with them in any way, just trying to point out my thoughts since I was openly negative about it before.
UPDATE: 10/6/10
I'm still very happy with the SP. HOWEVER, I AM BECOMING VERY ANNOYED BY THE SMEARING/FINGER PRINTS THOUGH. I can clean my screen with a microfiber and instantly it's dirty again. I have dropped some saline on the screen and then cleaned it... immediately becoming dirty again. I think the screen was much better at not showing fingerprints BEFORE adding the SP. Anyone else notice this? Any ideas?
those things are amazing, I actually took mine off after a couple of weeks because I had a little bubble on the top right corner that wouldn't go away. I washed it and stuck it back on and its still perfect, these things are definitely worth the price
Yesss, another convert to SP. Glad you did it.
I have one and would not trade it for anything. I would rather be safe with my phone than mess it up and regret for the rest of the time that I have it.
Enjoy.
Yes it's awesome but I did manage to scratch the screen protector itself somehow =( that's why I split it with you lol. I'm glad you got it already tho.
Sent from my SGH-T959 using XDA App
Did you notice the tiny pieces? You know those are for the cameras lens right? (i think lol it fits perfectly so I thought that's what it is for)
Sent from my SGH-T959 using XDA App
I agree that it is virtually invisible when on but try as I might I cant get it to go on cleanly. I finally gave up and live with two bubble. Thankfully they arent in the primary display area.
Oh Realook is definitely better. I first tried the T-mobil SP and noticed a big difference once i tried the Realook. Although my experience was not perfect with Realook, i did have a bubble around the speaker which i can't remove.. I haven't applied the 2nd one, i tried re-using the same one but i got the same results..even after i re-cleaned that area. Having said that, I would still recommend this SP as well
I love realook, they are amazing. I was showing my phone to a customer and they asked why I didn't use a SP. I told them I was using a SP but they didn't believe me. I took my case off and showed them the edge of the SP and they finally believed me.
Yes its good.I just wish it would not attract finger prints as much.oh well small issue to deal with. I had the t mobile one and it made the screen crappy.
Sent from my SGH-T959 using XDA App
KerryG said:
I agree that it is virtually invisible when on but try as I might I cant get it to go on cleanly. I finally gave up and live with two bubble. Thankfully they arent in the primary display area.
Click to expand...
Click to collapse
If the bubbles are on an edge that means it's not centered properly. Anywhere else I would say it's dust.
Yep RealLook is awesome. I got it because at the time, Clarivue didn't have one available. But RealLook seems to be the exact same thing so I'm very impressed.
I am a Realook Fan now. I had the t-mobile SP and that made the screen look so bad. Having the Realook Sp looks like there is nothing there.
im still streaking naked !!!!
I had the Realook SP for about half a week now, and I AM LOVING it. It's better than the T-Mobile, and Case-Mate SPs.
It doesn't even look like there's one there. No streaks, fingerprints, smudges, or grease.
When my brother seen the package, he asked if I ever put it on. I told him that there wasn't a SP on, and he believed me. I told him I put on a SP and he said, WOW. He didn't notice it.
It does take a little while to put on, I couldn't get on small bubble off, so I have to live with it.
You got a pm.
Sent from my SGH-T959 using XDA App
Well. I'm not impressed.
Both screens could not adhere properly at the earpiece level. The bubble would not go away. (and yes, it was spotless dust-free/clean application).
The adhesive eventually wore off from constant rejiggering and the bubble got bigger....
Yea its tricky i actually got pissed and crumpled the first one..
2nd one took some time...like 20 mins of patients but i eventually got it perfect and im loving it i have no issues with earpiece had few specs of dust but got rid with piece of tape.
Also someone stated its doesn't show fingerprints, smudges, or grease...that's not true.
you still see marks all over the screen from your fingers just like you would without a SP.
But doesn't bother me at all. I cant even tell i have SP and coming from crappy invisible shield rubbery SP im %100 satisfied with it.
I just received my RL screen protectors. They look and feel great. I noticed on both installed on our two vibrants the bubble around the earpiece. I worry that it may get bigger with wear, but if that's the only thing I have to worry about, I'll shell out the $11 again for another pair.
My wife has a snap on cover that goes around the earpiece, so I don't think she'll have that problem.
Sent from my SGH-T959 using XDA App
I have a trick to get rid of the ear piece probelm but not sure how to explain and if it will even help you
At the ear piece i think the SP plastic dips in slightly causing the not to sit properly.
I used my fingernail and scratched in towards the opening for the earpiece hole untill it was sitting flush and eventually flattened out.
dont worry you cant scratch the SP with your finger nail
LOL i hope i described that so you can understand
Do you just keep scratching it while it's on until it flattens out?
Sent from my SGH-T959 using XDA App
Hi all. Quick searching leads me nowhere as there are thousands of problems concerning issues I'm NOT having. Sorry for the crappy 3ds camera pic, it's the only thing I have at my disposal right now besides the phone. As I said in the title, I'm not using a screen protector - this is a stock phone right out of the factory with no accessories, albeit aged a bit.
If you'll take a look, you'll see two screen bubbles. The huge funky-looking one at the top started out looking like the one at the bottom, and grew over a period of a few weeks. The bottom one started out really small and doubled in size to what it is now, but has since stopped.
It's really annoying and starting to bother me, but I was wondering if anyone had experienced similar issues, or has any input whether or not I can maybe fix this thing without having to get a whole new screen/digitizer/whatever. No replacement plans on this phone so gotta figure something else out. Any idea what's going on?
D-Lew said:
Hi all. Quick searching leads me nowhere as there are thousands of problems concerning issues I'm NOT having. Sorry for the crappy 3ds camera pic, it's the only thing I have at my disposal right now besides the phone. As I said in the title, I'm not using a screen protector - this is a stock phone right out of the factory with no accessories, albeit aged a bit.
If you'll take a look, you'll see two screen bubbles. The huge funky-looking one at the top started out looking like the one at the bottom, and grew over a period of a few weeks. The bottom one started out really small and doubled in size to what it is now, but has since stopped.
It's really annoying and starting to bother me, but I was wondering if anyone had experienced similar issues, or has any input whether or not I can maybe fix this thing without having to get a whole new screen/digitizer/whatever. No replacement plans on this phone so gotta figure something else out. Any idea what's going on?
Click to expand...
Click to collapse
Is the plastic actually raised up? Can you see it when the screen is off? To me it looks like the digatizer may be going out, but its hard to tell from a pic.
It appears to be sealed and working fine... just has bubbles. I don't really know much about the insides of this phone, but it almost looks as if whatever is behind the digitizer is slightly warped and might be causing some contact with the glass or something like that. Reflections (off what is behind the screen - lcd? Not the reflections off the glass) tend to bend near the bubbles, whereas everywhere else behind the glass is pretty straight.
Essentially it just looks like water droplets or air bubbles forming on the inside surface of the glass, but it's never seen water before. I don't think the digitizer is failing.
Same problem, can I fix this myself?
Hi guys, I have the exact same problem on my HTC Desire. Touch is working fine, the pixels underneath are ok... yet this thing is expanding. What used to be 3 little bubbles near the very corner moved and turned into this amoeba looking thing after a few months.
Here are a few other shots.
Hope someone can let me know the possible verdict? Is it gone? Can it only be repaired by a professional or can I expect to be able to "clean up" the inside of the screen if I dismantle my phone as it is done here?:
http://forum.xda-developers.com/showthread.php?t=1566313
Maybe the liquids from the lcd are boiling from the heat? Sounds dumb but is a possibility
Sent from my ADR6300 using xda app-developers app
Yikes. Mine is still having the same issues. I'm thinking about just tearing it down soon and figuring it out myself. A little nervous working on something with such small components. Any tips for a first teardown? I need to get a T6 torx and I've already looked at a couple disassembly guides, was a while ago though.
As far as I can tell, I will have to replace either the digitizer/glass or the LCD. If it's the latter I'll probably just upgrade the phone cause they seem pretty pricey.
Ok, I did what I said and investigated myself. Unfortunately, I broke my phone doing it.
The problem is the front glass/digitizer. I couldn't get the LCD off, but I pried it back enough to see bubbles through the glass looking from the inside.
I broke my LCD prying on it, now I have an ugly black spot. Guess I'll be buying an LCD and a digitizer now. Anybody have some spare ones, or know the cheapest place to get them?
D-Lew said:
Ok, I did what I said and investigated myself. Unfortunately, I broke my phone doing it.
The problem is the front glass/digitizer. I couldn't get the LCD off, but I pried it back enough to see bubbles through the glass looking from the inside.
I broke my LCD prying on it, now I have an ugly black spot. Guess I'll be buying an LCD and a digitizer now. Anybody have some spare ones, or know the cheapest place to get them?
Click to expand...
Click to collapse
There are some digitizers on ebay for about $20 USD. i dont know about LCDs cause i never needed to replace mine but i would assume that they would be a little more expensive. Also, make sure you get the digitizer WITH the bezel because it will make your life a ton easier.
I'd better not touch it then
Sorry to hear about your LCD, D-Lew
Guess I wont be touching mine on my own. I'll definitely break it trying to do the same thing as you. I wonder if it's gonna break my phone if I just leave it as is. I mean, apart from the fact that it is there, it is not affecting the performance at all.
The bubble might get bigger. That's all you have to worry about.
Sent from my GT-P3113 using xda app-developers app
I've got these minute scratches on the WFS screen, 5-6 of them. Each a bit smaller than a millimetre and quite faint. Yes, I know, should have got myself a screen protector and the cause is most likely my pocket.
So I was wondering if anyone had any good experiences getting rid of scratches on a touch-screen? Of the ones I've come across, Displex seem to have mixed reviews about it. And there are some who swear by removing scratches using toothpaste. So before I do anything crazy, was just looking forward to get a second opinion.
PS. I've also come across articles about using cerium oxide and Brasso but I doubt they're safe to use on a touch-screen.
You could just replace the digitizer.
Thrawed said:
You could just replace the digitizer.
Click to expand...
Click to collapse
Well, 30-odd quid and a lot of hard work doesn't seem right considering how minute the scuffs are. I can just as well live with it but yeah, getting rid of them or maybe making them less noticeable would be just great!
stitizz son,
What would happen if you place a screenprotector over the scratches?
I don't believe in polishing with tooth paste i used it before on a Nokia and i wasn't happy whith the result. But don't know if it was a glass screen.
I never use a phone, not for a day, whitout screenprotector i learned my lesson.
Joop
I wasn't too keen on the toothpaste thing either. But any product which may as well do the least bit something! It's sad, come to think about it, that there are so many such products in the market, and nobody's satisfied with their experience of it. I might well stick to applying a screen protector on top of the scuffs. Well, it'd atleast do a good job keeping future scuffs at bay if anything! Thanks though guys, appreciated.
So fresh out of the box, the bezel on my Note 2 is a bit scratched, like someone took a fine blade and scraped into the inside of the bezel in a few spots. You can see it to the right of the button and in the corner. Kind of annoying. Anyone else seeing anything like this?
Absolutely not to be honest. Sorry.
Sent from my SPH-L900 using xda premium
Off topic, what camera are you using to take those pictures?
Sent from the second version of a hefty "Note" pad.
Oly XZ1. $200 on Amazon right now. I highly suggest picking one up. Those aren't even my best effort. I took some pics of surgeries today that put my Powershot S100 to shame. f/1.8-2.5 with a real nice sensor. If you don't care about movies on it, it's tough to go wrong.
I have two knicks on my pwr button. Methinks they reused a refurb button from an s3 or something.
Sent from my SPH-L900 using Tapatalk 2
To be honest I dont see anything wrong either looks like its supposed to. Perhaps your seeing a tiny flash on the sides of the case from manufacturing but I dunno I really dont see anything I want to as well..
deflon said:
I have two knicks on my pwr button. Methinks they reused a refurb button from an s3 or something.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
That's weird. I have a sixer and a laker on my volume up/down button.
leedawg said:
To be honest I dont see anything wrong either looks like its supposed to. Perhaps your seeing a tiny flash on the sides of the case from manufacturing but I dunno I really dont see anything I want to as well..
Click to expand...
Click to collapse
You can run your finger along the inside edge of the bezel and feel the scrapes. It's nitpicky, I know. But for $300, I want a pristine device that'll sit in a case with a screen protector. Yeah, Imight get a ding down the road, but I want the new car smell for as long as I can. I reuploaded the pictures and circled the areas. There's about 3 or 4 areas like that on the phone.
Same on my phone.
I thought it was only me!
Same here. Maybe it was just a handling issue for some scattered ones. Just a bit bummed as my original was overnighted, but now I have to wait 3-4 days. I'm not using it since I don't have a case and don't want to take a chance on it getting damaged somehow to where they think I did something to the phone. So I'm back on the S3. And MyBackupPro worked well for just backing up all my apps, SMS and logs and just restoring onto the Note. So that's a little comforting moving forward.
dbpaddler said:
That's weird. I have a sixer and a laker on my volume up/down button.
You can run your finger along the inside edge of the bezel and feel the scrapes. It's nitpicky, I know. But for $300, I want a pristine device that'll sit in a case with a screen protector. Yeah, Imight get a ding down the road, but I want the new car smell for as long as I can. I reuploaded the pictures and circled the areas. There's about 3 or 4 areas like that on the phone.
Click to expand...
Click to collapse
I totally understand I'm the same way i am the same way.. I like my study to stay in great condition as well.. i say send it back...
I would definitely call sprint or go to the store and get it exchanged. For this kind of money the phone better be mint.
Sent from my SPH-L900 using xda premium
Subiegsr said:
I would definitely call sprint or go to the store and get it exchanged. For this kind of money the phone better be mint.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I already have the return kit coming. Unfortunately, Sandy will probably cause it to be delayed.
Just got back from exchanging mine due to major imperfections in display and minor scratching on bezel.
On display the brushed grey color applied was not lined up thus making viewing area look crooked , Left side had 1/8 + inch / right side had less then 1/16 inch reveal.
Picture below is how its supposed to look which my 1st looked nothing like.
Also menu button light transparency was hindered creating jagged look due to brushed grey color not having clean lines < Very annoying to say the least , When soft key lights turned on it became my focus.
Basically the display was a mess not worthy of 225.00 contract buyout / 300.00 device cost so I had no choice but to attempt swap.
Bezel had minor nicks nothing major but could be seen.
Display units had same thing going on but not as bad so my chance of successful exchange were pretty slim but thanks to a very nice sprint store rep exchange was allowed.
She had not units in stock but let me know when they arrived one would be held for me.
An hour later I get the call swap took place and I'm now typing on perfection thanks to Sprint store rep Lisa.