The aluminum bumper from capdae looks nice. I like the black/gold especially, or maybe the all silver color. Has anyone tried it yet? I want to know how rigid it is, if it really is aluminum, and whether it is smooth and cool to the touch. Also wanted to know if the break where the two pieces snap together can be easily felt, and if the finish is good and smooth with no sharp or rough places. I've bought cheap snap-on hard cases and the break where they snap on was always rough and unpleasant.
Here's a video:
http://www.youtube.com/watch?v=kpNyO1AaOUg
Here's the same thing for the S2. It's easier to see the bumper.
http://www.youtube.com/watch?v=LRHvtTb4j-s
katamari201 said:
The aluminum bumper from capdae looks nice. I like the black/gold especially, or maybe the all silver color. Has anyone tried it yet? I want to know how rigid it is, if it really is aluminum, and whether it is smooth and cool to the touch. Also wanted to know if the break where the two pieces snap together can be easily felt, and if the finish is good and smooth with no sharp or rough places. I've bought cheap snap-on hard cases and the break where they snap on was always rough and unpleasant.
Here's a video:
http://www.youtube.com/watch?v=kpNyO1AaOUg
Here's the same thing for the S2. It's easier to see the bumper.
http://www.youtube.com/watch?v=LRHvtTb4j-s
Click to expand...
Click to collapse
I have one, it's pretty good! The frame itself is definitely aluminium (checked for solidity and sonorous...ity and confirm it's metal) Takes a little effort to snap it together, but once in place it's extremely solid with no flex whatsoever. The frame is also slightly raised at the back in each corner so the camera lens does not touch the "surface" when you put it down (something that was crucial to me and not clear from the pictures)
The only slight downside is that the metal is quite smooth so it's a little slippery compared to my previous leather case (unsurprising!) and the brushed effect is only average, would have preferred a "matte" effect but that's only a minor gripe.
As for sharp edges, the only edges I really notice are around the stylus gap but even these aren't particularly sharp, just 90° cuts.
This frame is definitely not going anywhere without the opening tool, that's for sure!
Why do people put these bumpers on their phones...I mean on a phone like the iPhone or S2 where it's small, I'd get it...but on a large phone like the Note....I just find it so fugly.
PoisonWolf said:
Why do people put these bumpers on their phones...I mean on a phone like the iPhone or S2 where it's small, I'd get it...but on a large phone like the Note....I just find it so fugly.
Click to expand...
Click to collapse
Considering it's up to them since they bought it..
Tell you what, you can buy me another Note and put whatever you want on it.
What kind of aluminum is it and how does it feel? Say in comparison to the iPad (abit rough but nice), iPad2/3 (a bit too smooth and not as rigid as first ipad), iPhone (stainless steel-ish), samsung phones like the s8500 wave and omnia 7 (brushed and too rough, not very rigid). I guess any household item or gadget to describe it would be nice. Would like to also know how much of a surface area increase does it provide over just the bare chrome trim, and whether it is easier and more comfortable to hold with it on. Holding it comfortably and securely is my main focus. Oh, also wanted to know whether there is any soft material in the inside, especially where it touches the front glass, to protect the phone from getting scratched by the frame.
katamari201 said:
What kind of aluminum is it and how does it feel? Say in comparison to the iPad (abit rough but nice), iPad2/3 (a bit too smooth and not as rigid as first ipad), iPhone (stainless steel-ish), samsung phones like the s8500 wave and omnia 7 (brushed and too rough, not very rigid). I guess any household item or gadget to describe it would be nice. Would like to also know how much of a surface area increase does it provide over just the bare chrome trim, and whether it is easier and more comfortable to hold with it on. Holding it comfortably and securely is my main focus. Oh, also wanted to know whether there is any soft material in the inside, especially where it touches the front glass, to protect the phone from getting scratched by the frame.
Click to expand...
Click to collapse
The only soft inside is on the back section in the four corners. The phone does not move around at all so there is no risk of scratching, which is also coupled with the fact that aluminium physically cannot scratch Gorilla Glass - in fact your screen will scratch the aluminium!
As for holding it, there is a certain degree of personal opinion involved. Some people would find the ridge on the back surface (the cutout of the frame where it meets the battery cover) uncomfortable, however I really like it because it provided a gripping point for your fingers when holding one handed a bit like the finger ridges on some digital cameras.
Size-wise, it only adds ~2mm on each side so not much of a difference.
The finish is brushed aluminium, so cannot be compared to any iDevice because they are all matte/sandblasted. The finish reminds me of the brushed aluminium of the Hyper Osiris PC case (mainly because I had one of these myself for a while) If you do a Google Images search and filter for large images you'll get a good view of the finish style. One thing for sure, it definitely does not flex when pushed anywhere!
capdase usually has good, reliable and cheaper cases for those on a budget i think in some you get a free screen gaurd too which is like killing two birds with one stone
nikethdesouza said:
capdase usually has good, reliable and cheaper cases for those on a budget i think in some you get a free screen gaurd too which is like killing two birds with one stone
Click to expand...
Click to collapse
Forgot to mention that bit, my Duo Frame came with a screen protector as well. Not applied it yet though!
So I purchased this case off ebay- its from a korean store. Not much regarding the store or the company the case is made by: Neim
I was looking for a high quality, nice looking with features to set it apart but also to protect the phone.
It is made out of genuine leather, dark navy blue and yellow accent latch (which is magnetic) and yellow CC/license (3) holder inside, which allows you to hold cash. There are 2 cut outs for camera/led flash and speaker.
The interior is lined in felt. The case portion where the phone sits in is plastic but that rubbery smooth texture. The top and bottom (on sides) are what clips the phone to stay in. I wish the top corners were covered like the bottom is. All buttons and ports are easily accessible. The phone though is very tightly secured.
The case can be opened and used as a stand in landscape. its quite sturdy and stays in place.
An added bonus which I liked was the included matte finish screen protector. It was easy to apply. I like it cause there are little/no finger prints.
Overall I like the case. It does add bulk to the phone, which I dont mind.
2 pictures uploaded. Will take HD pictures and video when i have some time
Looks pretty neat.
I've got one of these STM Grip cases for my iPad and it's by far the best case I've owned for a tablet. It's super slim, gives really good protection (iPad dropped without damage), has a rear kick stand and is clip-in style so obscures nothing of the glass. I've now also bought a Note 10.1 and have searched and searched everywhere to find a similar style of case for the Note but can't find anything. The most important factors for me are a clip-in style and a rear kickstand.
I can't stand the rotating (or non-rotating) type with front kickstands because they always fall over when set a low angle, and I've owned a few of them, some expensive. The STM Grip isn't cheap but does everything well whilst adding very little bulk.
I've bought one of these cases from Amazon and which does half the job because it has a superb and very stable adjustable rear kickstand but is a slip-in style so the leather case edges obscure a chunk of the front glass.
Any help finding an STM Grip-style case for the Note is very much appreciated :good:
I'd like to see one of these too, I'm using the "Roocase" that is similar to the second image and it makes interacting with the corners of the screen awkward if not using the stylus...
Ashton_Durkhun said:
it makes interacting with the corners of the screen awkward if not using the stylus...
Click to expand...
Click to collapse
Thats exactly my issue. It's not ideal at all. I'm pretty sure that (amazingly) there isn't such a case for the Note so I'm going to make a hybrid by taking a clip-in hard plastic tray from one case, removing the leather sleeve (but keep the back board) from the kickstand case then bonding the tray to the back board of kickstand case. Won't quite be the STM Grip but it should give me a good solid rear kickstand and full access to the screen.
Will post up some pics if I manage to get it done.........
We got an Moto X last week and a 2nd one on Monday Sale..
We got a case for the 1st one but it covers up the MotoMaker design.
Like the clear back and the rubber sides.
Any thoughts or feed back?
http://www.motorola.com/us/Air-Jack...-Jacket-Grip-for-Moto-X-by-Power-Support.html
I got one yesterday and I really like it. The rubber on the sides seal up to the bezel really nice and it fits snug. Adds just enough grip to it feel secure holding it (I don't like slippery devices!)
My first case was the clear plastic shell by inCase and I wasn't a fan. The plastic felt really slick & had no grip, and held on to smudges FOREVER. The AirJacket's plastic is a lot easier to wipe clean.
That looks like a really nice case. Even with last week's 30% off though, I couldn't justify that much for a case.
I like the one I got, except for the orange color. Is this odd pastel orange. Good quality though
Sent from my XT1058 using Tapatalk
Thank you able to post any pics..?
On the Monday sale at 350 for the phone and 30% on the case its till an amazing price for a phone with a nice case!
My main issue with the case is that it is so hard to get on and off the phone
Sent from my XT1060 using xda app-developers app
wwr8bz said:
My main issue with the case is that it is so hard to get on and off the phone
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
I found the trick to that.
When putting it on--but the bottom of the phone in first, then slide the top over.
Reverse this for taking it out of the case. (Start at bottom, go to top.)
Anyone know the difference between the InCase clear case and the Air Jacket Clear case? I ordered the Air Jacket one, but haven't seen any reviews except on the InCase one.
v3rn said:
Anyone know the difference between the InCase clear case and the Air Jacket Clear case? I ordered the Air Jacket one, but haven't seen any reviews except on the InCase one.
Click to expand...
Click to collapse
I have both of these cases. I ordered the clear InCase with my phone off of the Moto Maker. It fit the phone fairly snug, but it seemed to feel like cheap plastic to me. It would act like a magnet for skin oils and finger prints and then was nearly impossible to get completely clean again. The molding of the edges that grip the phone seems kind of funny, because if you look at it pretty straight on it looks like there are paint chips in the plastic or something. Getting it off the phone always felt impossible, too! The whole thing felt very poorly made.
The Air Jacket I just got is a whole other story. The plastic on the back feels a lot better and doesn't have as much of the issue with finger prints. The rubber on the sides is grippy but not enough to be distracting. I feel a lot more confident holding this phone in my hand as I walk down the street, mainly in that I don't think it might slip out of my hand on accident.
I got the orange Air Jacket to go with my phone's metallic orange accents. The orange on the case is a little brighter and more washed out, but I still think it looks nice. I have a couple photos of both cases attached. Sorry if you are interested in seeing the phone in the clear InCase! I am not motivated enough to go through the hassle of swapping them again!
Edit: My attached photos aren't working for me so I'm guessing its not working for anybody else. Here are some linked photos, instead.
http://files.h4xful.net/airjacket1.jpg
http://files.h4xful.net/airjacket2.jpg
http://files.h4xful.net/airjacket3.jpg
geeksunny said:
I have both of these cases. I ordered the clear InCase with my phone off of the Moto Maker. It fit the phone fairly snug, but it seemed to feel like cheap plastic to me. It would act like a magnet for skin oils and finger prints and then was nearly impossible to get completely clean again. The molding of the edges that grip the phone seems kind of funny, because if you look at it pretty straight on it looks like there are paint chips in the plastic or something. Getting it off the phone always felt impossible, too! The whole thing felt very poorly made.
The Air Jacket I just got is a whole other story. The plastic on the back feels a lot better and doesn't have as much of the issue with finger prints. The rubber on the sides is grippy but not enough to be distracting. I feel a lot more confident holding this phone in my hand as I walk down the street, mainly in that I don't think it might slip out of my hand on accident.
I got the orange Air Jacket to go with my phone's metallic orange accents. The orange on the case is a little brighter and more washed out, but I still think it looks nice. I have a couple photos of both cases attached. Sorry if you are interested in seeing the phone in the clear InCase! I am not motivated enough to go through the hassle of swapping them again!
Edit: My attached photos aren't working for me so I'm guessing its not working for anybody else. Here are some linked photos, instead.
http://files.h4xful.net/airjacket1.jpg
http://files.h4xful.net/airjacket2.jpg
http://files.h4xful.net/airjacket3.jpg
Click to expand...
Click to collapse
Thanks for the pictures and thoughts. I actually got the clear air jacket case. It doesn't have the rubber bumper, its similar to the incase clear, but supposedly has a self healing plastic. But if you like the clear plastic on the normal air jacket, its probably the same as on the case I ordered.
geeksunny said:
I have both of these cases. I ordered the clear InCase with my phone off of the Moto Maker. It fit the phone fairly snug, but it seemed to feel like cheap plastic to me. It would act like a magnet for skin oils and finger prints and then was nearly impossible to get completely clean again. The molding of the edges that grip the phone seems kind of funny, because if you look at it pretty straight on it looks like there are paint chips in the plastic or something. Getting it off the phone always felt impossible, too! The whole thing felt very poorly made.
The Air Jacket I just got is a whole other story. The plastic on the back feels a lot better and doesn't have as much of the issue with finger prints. The rubber on the sides is grippy but not enough to be distracting. I feel a lot more confident holding this phone in my hand as I walk down the street, mainly in that I don't think it might slip out of my hand on accident.
I got the orange Air Jacket to go with my phone's metallic orange accents. The orange on the case is a little brighter and more washed out, but I still think it looks nice. I have a couple photos of both cases attached. Sorry if you are interested in seeing the phone in the clear InCase! I am not motivated enough to go through the hassle of swapping them again!
Edit: My attached photos aren't working for me so I'm guessing its not working for anybody else. Here are some linked photos, instead.
http://files.h4xful.net/airjacket1.jpg
http://files.h4xful.net/airjacket2.jpg
http://files.h4xful.net/airjacket3.jpg
Click to expand...
Click to collapse
Nice, just to confirm cause in your pics it looks like it doesn't, but does this case hit the screen at all on the edges? I ask because I am curious if it would cause any screen protectors to lift on the corners like some TPU cases do because they hit the screen.
Thanks
The rubber does not extend past the bezels at all so you should never have that problem. In fact at the edge of the case you can see a tiny bit of the bezel.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Screen on table
Does the case make it so the screen no longer touches a table if you were to place it screen down? Thanks for the info
Raistlin1 said:
Nice, just to confirm cause in your pics it looks like it doesn't, but does this case hit the screen at all on the edges? I ask because I am curious if it would cause any screen protectors to lift on the corners like some TPU cases do because they hit the screen.
Thanks
Click to expand...
Click to collapse
What Jayrod already said on this is correct. You will still see a small sliver of the bezel.
lionman229 said:
Does the case make it so the screen no longer touches a table if you were to place it screen down? Thanks for the info
Click to expand...
Click to collapse
Yes, the case will lift the screen up away from the surface its sitting on. I usually place mine face down when I'm at my desk. No problems.
I ordered the Air Jacket Grip from Motorola and one of the anti-glare screen protectors. I think they both fit nicely on the Moto X. Does anyone know if there's a holster solution that works well with this case? I've been back and forth on all my phones between holsters and pocket carry. I was just wondering if Air Jacket made a holster for this case or if I'd have to go generic pouch.
I've been using my moto X with the air jacket case and the brilliant screen protector for about a week now. I'm really liking both. My biggest gripe about screen protectors was the way they felt. My previous ones felt too gummy and made it annoying to use so I would always rock the phone naked. The brilliant is as smooth as the glass. It does attract fingerprints and smudges but they wipe away easily enough.
Thank you..got the phone and the Air Jacket today and love the case!
It matches the Moto Maker Lime Yellow so great mix.
Real comfortable to use and good protection.
With the $350 purchase and 30% accessories it was great value vs the 1st Moto X I got at full price and returned for the difference!
Just put the Air Jacket Grip on my wife's and the regular Air Jacket on mine (they didn't have the color I wanted). Both cases fit very nicely, with minimal bulk, and don't appear to overlap the screen. They wrap just enough of the bezel to keep them firmly in place. Both models are super thin, lightweight, and follow the contours of the phone perfectly. Each has its pros/cons.
The Air Jacket Grip was fairly difficult to attach, and covers the buttons so if you're in love with your accent color, you'll lose some of it. This is offset by the fact that the transparent plastic "transmits" the color of the rubberized grips to all the visible edges of the plastic, so you pick up color accents all around your camera, speaker, and all the other cutouts. Kinda cool fiber-optic-like effect. The other obvious thing is the edge is grippier, but not nearly as much as I expected.
The regular Air Jacket has cutouts for all the buttons, so it doesn't hide the accent color, and is a breeze to attach. It covers much less of the front of the phone too than the grip version, because it doesn't wrap around the top or bottom of the phone. It's also extremely slippery.
Wade-0 said:
The regular Air Jacket has cutouts for all the buttons, so it doesn't hide the accent color, and is a breeze to attach. It covers much less of the front of the phone too than the grip version, because it doesn't wrap around the top or bottom of the phone. It's also extremely slippery.
Click to expand...
Click to collapse
I just received my regular Air jacket today and you're absolutely right about it being slippery. I'm glad they designed it to where I can still place my finger in the dimple though.
Got mine and fought like hell to install. Silver is not silver. More like white. Returning.
Also don't like how hard it is to push the buttons.
On to the next. (i have 5 total-mostly cheap one's from amazon)
After seeing no choices for a regular bumper style case with a pen holder, I decided to get creative and made one for myself. I used this Poetic Turtle Skin case (I have it on all the tables in my house). Then I got these pen holder tabs.
Using an exacto knife I made a tiny cut in the top edge of the case, just barely long enough to equal the width of the pen holder loop. I had to do it slowly and repeatedly cut away until I made it through the thick rubbery material. I think this case will work the best for this because of the durable rubber material should continue to split. Then I pushed the loop through on the inside. I didn't try to adhere the inside tape to the case because the tablet will hold the tab in place, plus the snug fit of the loop through the rubber is pretty tight.
It's been working well and holding up great for me for the past 2 months. I've included some pictures so you can see what it looks like.
Hope this helps someone else out.
How does the tablet sit in the case with the mod? I tried the same thing with a more slim fit case and it prevented the edges of the case from covering the tablet at that spot due to the thickness of the sticky pad.
irieblue said:
How does the tablet sit in the case with the mod? I tried the same thing with a more slim fit case and it prevented the edges of the case from covering the tablet at that spot due to the thickness of the sticky pad.
Click to expand...
Click to collapse
It has worked out very well and there's no chance it will come out. There is a slight bump along the top edge but it's really negligible and doesn't bother me or my use of the tablet. It still covers the entire device and protects the edges.
Ok see
thats a nifty pen holder