Hi
I'm new to hd2 ,Please reply to my noob question .well to start with i followed all procedure accordingly to use android on nand and all is fine & i see the clockworkmode and all 'em menu & was also able to flash this rom dated 28th june " 28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10] "successfully, and its working like charm.my only problem is " when i shutdown the phone & try to charge my phone using power socket/outlet my phone restarts automatically instead of charging in shutdown mode it runs magdlr script go go go!! and boots back to home screen.and keeps charging,My question ..is my phone alrite or something wrong in the flashing ?cause it never charges in shutdown mode & boots back to home screen,please help me asap..would appreciate it..
sundawg said:
Hi
I'm new to hd2 ,Please reply to my noob question .well to start with i followed all procedure accordingly to use android on nand and all is fine & i see the clockworkmode and all 'em menu & was also able to flash this rom dated 28th june " 28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10] "successfully, and its working like charm.my only problem is " when i shutdown the phone & try to charge my phone using power socket/outlet my phone restarts automatically instead of charging in shutdown mode it runs magdlr script go go go!! and boots back to home screen.and keeps charging,My question ..is my phone alrite or something wrong in the flashing ?cause it never charges in shutdown mode & boots back to home screen,please help me asap..would appreciate it..
Click to expand...
Click to collapse
it will do that as thats the way magldr does it
you can only charge the phone while it is on
so theres nothing wrong with your phone or rom
Kameirus said:
it will do that as thats the way magldr does it
you can only charge the phone while it is on
so theres nothing wrong with your phone or rom
Click to expand...
Click to collapse
Hi Kameirus,
Thanks much for a quick reply, So im safe,my phone hardware is not faulty rite? cause i got kinda scared,cause on winmo it would charge on shutdown.so like with MAGDLR it would never charge on shut down? is it really safe to charge with phone on? cause what i think..you woudln't get the correct battery stats with phone in online mode? am i rite? if not please correct me if i'm wrong. & is their a way to charge in shutdown mode..thanks again appreciate it
If you do feel like you need charging while device is off you can always go for a cLK setup.
patensas said:
If you do feel like you need charging while device is off you can always go for a cLK setup.
Click to expand...
Click to collapse
Thanks for the reply..b/w which is the better version to opt ? clk or magdlr .i mean to say which would be the safest, & can i install clk over magdlr?or do i have to start all over again? how safe is it?..in case if i would wanna roll back to winmo
This is the dev section not Q&A.
TheATHEiST said:
This is the dev section not Q&A.
Click to expand...
Click to collapse
Sorry my bad, i wasnt much sure i already told in my thread im a noob,i def appreciate your help,i'm sorry if i started a thread in dev thread,but would you mind taking your 2 minutes off on me by replying my question ..Much Appreciated
Choosing between MAGLDR or cLK is a personal thing, both do their jobs very well with just minor differences. One major difference is the charge option while device is off.
Some complain about data issues using cLK others swear by it.
However you should monitor battery usage when using MAGLDR to be sure your battery doesn't turn out empty, as you can imagine there will be no way you can charge when your battery runs out.
sundawg said:
Thanks for the reply..b/w which is the better version to opt ? clk or magdlr .i mean to say which would be the safest, & can i install clk over magdlr?or do i have to start all over again? how safe is it?..in case if i would wanna roll back to winmo
Click to expand...
Click to collapse
You could go to each loader's respective thread and read what it has to offer. Both are safe. cLK should have a few extra features though (except for tetris which comes with mgdlr ). I've never used cLK myself but I'd think that the procedure is the same. Bootscreen->flash clk->flash clockworkmod partition. This all becomes easier if you just download hd2 toolkit (use search) which is an all-in-one solution for all your flashing needs.
patensas said:
Choosing between MAGLDR or cLK is a personal thing, both do their jobs very well with just minor differences. One major difference is the charge option while device is off.
Some complain about data issues using cLK others swear by it.
However you should monitor battery usage when using MAGLDR to be sure your battery doesn't turn out empty, as you can imagine there will be no way you can charge when your battery runs out.
Click to expand...
Click to collapse
Thanks much..That answers my question,guess i'll stay with MAGDLR.and keep a Tab on battery that it don't die on me.
patensas said:
However you should monitor battery usage when using MAGLDR to be sure your battery doesn't turn out empty, as you can imagine there will be no way you can charge when your battery runs out.
Click to expand...
Click to collapse
This is somewhat incorrect statement - when battery dies, just plug it in and MAGLDR will turn on your device and start charging.
PS: this thread should be moved to Q&A.
is it? You go ahead and drain your battery till it's empty and try it. Your device will try to start and falls out due to the lack of power to get started.
Another battery is needed to config cLK to get the empty battery charged. Happened to me and i was glad i had a spare battery.
prosto said:
This is somewhat incorrect statement - when battery dies, just plug it in and MAGLDR will turn on your device and start charging.
PS: this thread should be moved to Q&A.
Click to expand...
Click to collapse
sundawg said:
Hi Kameirus,
Thanks much for a quick reply, So im safe,my phone hardware is not faulty rite? cause i got kinda scared,cause on winmo it would charge on shutdown.so like with MAGDLR it would never charge on shut down? is it really safe to charge with phone on? cause what i think..you woudln't get the correct battery stats with phone in online mode? am i rite? if not please correct me if i'm wrong. & is their a way to charge in shutdown mode..thanks again appreciate it
Click to expand...
Click to collapse
sorry its taken so long to reply this time i just got home from work
ive never had any problems with my phone charging it while its on
in fact since i do mods and test stuff my phone seems to be constanly plugged in lol
and i think everyone else has answered your other questions
patensas said:
is it? You go ahead and drain your battery till it's empty and try it. Your device will try to start and falls out due to the lack of power to get started.
Another battery is needed to config cLK to get the empty battery charged. Happened to me and i was glad i had a spare battery.
Click to expand...
Click to collapse
can someone confirm this?
magldr will turn on the phone and start charging when the battery empty? or it not able to turn on? some said yes and some said no.
hengmy said:
can someone confirm this?
magldr will turn on the phone and start charging when the battery empty? or it not able to turn on? some said yes and some said no.
Click to expand...
Click to collapse
check this thread or read here and ofcourse the MAGLDR thread
MAGLDR does not have a software in it which allows the phone to charge when off. My advice to you, never, ever, let your phone lose charge. A dead battery is a dead phone in our case, unless you have spare batteries.
Click to expand...
Click to collapse
hengmy said:
can someone confirm this?
magldr will turn on the phone and start charging when the battery empty? or it not able to turn on? some said yes and some said no.
Click to expand...
Click to collapse
Yes, it will.
Once again, just plug in your power adapter after your battery dies - your device will boot and start charging.
This is a feature of MAGLDR 1.13.
I'll stop the yes/no game but would like to know where you got the knowledge that this is solved in MAGLDR 1.13?
sahus
20th February 2011, 10:51 AM
Sorry for this, but the search function do not work now, and haven't worked for the past few hours. My phone was charged to 100% yesterday night, and today it was turned off because of no battery.
i plugged in the phone to my computer and it just reboots, i cant charge the battery. I need some seriously help here. Yes i have read this post but i cant find a solution to this problem.
I have also trieed it in my wall charger but the same happens, just reboots all the time.
I use this rom: [17 FEB][DFT] CleanDROID v2.02_smu - Super Clean Froyo+Cyanogen [Kernel GL_Core_v2b] By G.Lewarne link to rom: http://forum.xda-developers.com/showthread.php?t=917590
I use MAGLDR 1.13
please help me in the right direction
Click to expand...
Click to collapse
prosto said:
Yes, it will.
Once again, just plug in your power adapter after your battery dies - your device will boot and start charging.
This is a feature of MAGLDR 1.13.
Click to expand...
Click to collapse
patensas said:
I'll stop the yes/no game but would like to know where you got the knowledge that this is solved in MAGLDR 1.13?
Click to expand...
Click to collapse
Here's a link to Cotulla's 1.13 post and further discussion:
http://forum.xda-developers.com/showthread.php?p=11037197#post11037197
Personally had many occasions when the battery drained completely and had no problems plugging it in, booting up and charging.
Otherwise, I wouldn't repeat the same things over.
prosto said:
Here's a link to Cotulla's 1.13 post and further discussion:
http://forum.xda-developers.com/showthread.php?p=11037197#post11037197
Personally had many occasions when the battery drained completely and had no problems plugging it in, booting up and charging.
Otherwise, I wouldn't repeat the same things over.
Click to expand...
Click to collapse
Well that is another issue fixed but hey if it works for you
Sent from my HTC HD2 using XDA Premium App
Related
that's the point... becouse of low battery it turner off while I was using Android and there's no way to make it work... when I press the power button all i have is the "Touch Pro 2" on the screen, than it turnes of... what can I do?
I apologize if there're some threads on this topyc, but I didn't check too well
hope to get some answers from you, genius guys!
Plug in your charger when it's off. Leave it there for a few hours and then try again. If that doesn't work your batterie is dead and you will have to buy a new one.
If you already charged it and this is still happening, task 29 your internal memory and flash to your carrier stock rom. The same thing happened to me and flashing back the stock at&t rom allowed me to boot back into winmo.
Sent from my MSM using XDA App
Geko90 said:
that's the point... becouse of low battery it turner off while I was using Android and there's no way to make it work... when I press the power button all i have is the "Touch Pro 2" on the screen, than it turnes of... what can I do?
I apologize if there're some threads on this topyc, but I didn't check too well
hope to get some answers from you, genius guys!
Click to expand...
Click to collapse
Remove the battery for about 30seconds. replace the battery (do not power on) plug in the charger and wait about 10 mins then power on the phone. The battery is too weak to go through the boot process. Try not to touch the phone for about 2.5 hrs after powerup. Stay in WiMo as well....
Hi all, yesterday I rooted and s-off my device and all seem to be ok...the only problem that I have is when I switch off my dhd and I plug it with the charger....
The DHD turns on in the clockworkmode.....how can I charge my device keeping it totally off?
Thanks
Sent from my Desire HD using XDA App
killkenny said:
Hi all, yesterday I rooted and s-off my device and all seem to be ok...the only problem that I have is when I switch off my dhd and I plug it with the charger....
The DHD turns on in the clockworkmode.....how can I charge my device keeping it totally off?
Thanks
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
you cant change it thats wt happens on the DHD, put your device in hibinate mode then charge will stop cwm showing
Wow...surprised that the DHD can stay off and be charged in the same time...
could you explain "put your device in hibinate mode then charge will stop cwm showing"...what do you mean with device hibernate, how can I do it?
I usually switch off and charge my mobile in the night while i'm sleeping....no more again!! ...hope that i'm wrong! thank you for the info!!!
A couple of things, this exact question has been answered by myself and others countless times. Try to atleast search for an answer before you post.
Now the answer.
When your DHD is stock, plugging into to a charger when switched off would start a reduced function "Recovery" all this does is display the charging LED.
Now, since you replaced the Recovery with ClockworkMod Recovery. It will just start that instead.
The only fix/solution is to remove ClockworkMod Recovery.
killkenny said:
Wow...surprised that the DHD can stay off and be charged in the same time...
could you explain "put your device in hibinate mode then charge will stop cwm showing"...what do you mean with device hibernate, how can I do it?
I usually switch off and charge my mobile in the night while i'm sleeping....no more again!! ...hope that i'm wrong! thank you for the info!!!
Click to expand...
Click to collapse
Assuming that you are rooted n running CWM...flash the advanced power options zip then you ll get the option to hibernate your DHD (just when you long press the switch off button)
Hey guys,
Was just looking through the market and saw an animations app, so i downloaded it, installed as normal, accepted the superuser request and chose what animation i wanted, (I chose blur if it makes any difference). It then requested a reboot, so i rebooted, but now nothing happens to my phone, It is just like the phone is powered off, nothing comes up on the screen. Ive tried booting normally and booting into recovery but nothing
Any ideas?
I'm using Leedroid ROM and Kernel, both on the latest versions.
Thanks in advance.
What happend if you plug in the power cable? Isn't booting into recovery?
dmue said:
What happend if you plug in the power cable? Isn't booting into recovery?
Click to expand...
Click to collapse
Nope nothing happens, it's just like its got no power to it :/
take out your battery, put it back in and restart your DHD.
sphuyal said:
take out your battery, put it back in and restart your DHD.
Click to expand...
Click to collapse
Nope nothing happens, maybe I should try a new battery?
IMHO a new battery dosen't help...
No more idea, sry.
Sent from my Desire HD using Tapatalk.
charge battery till full ?
Take your battery out for five minutes, put it back and connect charger. Do not touch the power button.
Sent from my Desire HD using Tapatalk
jkoljo said:
Take your battery out for five minutes, put it back and connect charger. Do not touch the power button.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Will try this now
jkoljo said:
Take your battery out for five minutes, put it back and connect charger. Do not touch the power button.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Nope nothing happened
Take the battery out again, put it back and then hold volume down & power button. You can also connect the charger to be sure that this is not caused by low battery level. If it still stays off, you should send it to HTC.
jkoljo said:
Take the battery out again, put it back and then hold volume down & power button. You can also connect the charger to be sure that this is not caused by low battery level. If it still stays off, you should send it to HTC.
Click to expand...
Click to collapse
Yep still nothing happens, send it to HTC even though it is rooted?
You have no other choice. Software mods do not void warranty, so it should be ok.
jkoljo said:
You have no other choice. Software mods do not void warranty, so it should be ok.
Click to expand...
Click to collapse
Ok, thanks so much for the help.
I'm having the same problem now... wilky let me know if you get it working or if HTC gets it fixed without a hassle, because mines rooted .
Hi
I have the same problem. When I put the Battery and plug in the chagher the red led start to flash.
After 1 minute stops.
If someone can help us we will be very happy!!!!!!
10x
Got the same problem after starting to format my sdcard with cwm. Just nothing happens anymore, but when i connect my dhd to my computer its indicated as device "qhsusb_dload", but i cant access it with adb or anything. Tried to foce install htc-drivers, but didnt help. Gonna take it to a local o2 store and check if there can be anything done bout it.
when i drained my battery fully to the point that it turns itself off, when i plugged it in it sort of looped into boot, but after i remove the charger and plugged it again, the red light turned on and i just left if for ten minutes, then pressed the power button then i turned on as normal.
i'm thinking it might be because the battery is just too drained at one point.
Squalli said:
Got the same problem after starting to format my sdcard with cwm. Just nothing happens anymore, but when i connect my dhd to my computer its indicated as device "qhsusb_dload", but i cant access it with adb or anything. Tried to foce install htc-drivers, but didnt help. Gonna take it to a local o2 store and check if there can be anything done bout it.
Click to expand...
Click to collapse
I have same problem.
Its just happened NOW. What the hell ? What we can do to fix this ?
Guys
I had the same problem.
I charged aways the phone by the USB on my PC.
But this is a problem.
Try to charge for an Hour or two your usb original charger your phone.
My problem was that the battery was so empty that the PC USB coudn't had the power to charge it. The Original Charger CAN.
So dont wait more and put it and Charge.
Tell me if this was the resolution.
Bye bye
1) I have cm7
2) I downloaded Kernel Manager and downloaded and flashed the latest Tiamat kernel.
After that, my battery will not charge. I have an all in one charger that I can use in my car or plug into an outlet (from Sprint). When I plug in the charger, a light comes on so that I know it's plugged in. However, when I plug it into my phone it won't charge AND it turns off the light on the charger. Luckily I have a coworker that has an EVO and my charger works just fine with his phone.
I've rebooted several times, which is killing my battery. I tried to just flash a new kernel, but now I kept getting errors that flashed too quickly for me to read. I thought, Hey I'll uninstall and re-install. So I uninstalled and tried to open the Market and now I'm getting network errors and can't connect through anything. I'm down to 37% so I can't flash the new cm7.1.
Yes, I'm a n00b but I have researched and Googled and I can't find anyone with the same problem. Feel free to tell me to throw my phone out the window, but I'd really appreciate some help. Even if it's "Take out your SD card and flash cm7.1 when you get home."
TIA.
*EDIT: Thanks for everyone's help. It looks like it is a hardware problem (bad pins). I went back to stock and unrooted so Sprint can fix it/give me a new phone.
Have you taken out the battery, and let it sit out for maybe a good solid minute, then try to charge? it worked for me on the random time it happened, and make sure its plugged into a wall outlet, not a usb port, ect.
teh roxxorz said:
Have you taken out the battery, and let it sit out for maybe a good solid minute, then try to charge? it worked for me on the random time it happened, and make sure its plugged into a wall outlet, not a usb port, ect.
Click to expand...
Click to collapse
I'm defintely just using my wall/car charger since my usb cable is at home.
I left it out for two minutes and I still have the same problem.
Thanks for the suggestion!
Well first try letting the battery cool down just turn off your phone for like 15 min. And see if that works.
If that dont work try this and since you use kernel manager try this.
1.go into the settings of kernel manager and turn off the setting for auto flashing.
2.download the godmode kernel towards the bottom of the list.
3.steel your friends battery with his permission since your running out.
4.boot into recovery and wipe cache/dalvik.
5.(now I take it your in clockwork and not amon since you running cm7 so I'm not sure what you click to do this since unused amon) but go to flash a zip from SD card and look for a folder on the root of your SD called kernel-manager then go to the toastcfh folder and flash the godmode-v9 zip that's in there. Its a great kernel the was made for use with cm7 + all other aosp so it should work. Post your results if it did or didn't work
Sent from my PC36100 using XDA Premium App
Did you make a backup before flashing? If so, flash the nandroid and reflash the kernel.
Also, try downloading the kernel to your computer from its respective website, transfer it to your phone, then flash.
staveflyer said:
I'm defintely just using my wall/car charger since my usb cable is at home.
I left it out for two minutes and I still have the same problem.
Thanks for the suggestion!
Click to expand...
Click to collapse
What I would try is download the kernel from the dev section [could have gotten a bad flash], then try that.
Also, try another battery in your evo, like you co-workers, because you battery could be super drained and it'll have to be jumped at a sprint store; or leave in on the charger for a few hours and see if it turns on.
AZ1412 said:
Did you make a backup before flashing? If so, flash the nandroid and reflash the kernel.
Also, try downloading the kernel to your computer from its respective website, transfer it to your phone, then flash.
Click to expand...
Click to collapse
I did not backup because I am stupid and was having trouble trying to flash it in recovery (my power button wasn't working as "select", it was just turning my screen off). But I have titanium back up and I didn't flash cm7 so long ago that I would mind flashing the nandroid or a new ROM.
I can't flash right now because my battery is now a very sad 22% and I'm pretty sure my coworker isn't going to lend me his battery. I also don't have my data cable with me so I can't do anything between my phone and computer until I get home.
This is really ****ing with my happy hour plans.
staveflyer said:
I did not backup because I am stupid and was having trouble trying to flash it in recovery (my power button wasn't working as "select", it was just turning my screen off). But I have titanium back up and I didn't flash cm7 so long ago that I would mind flashing the nandroid or a new ROM.
I can't flash right now because my battery is now a very sad 22% and I'm pretty sure my coworker isn't going to lend me his battery. I also don't have my data cable with me so I can't do anything between my phone and computer until I get home.
This is really ****ing with my happy hour plans.
Click to expand...
Click to collapse
Did you try my method? I'm like 90% sure it will work haha you just got to get a battery from someone. And no need for a computer just download to your phone. It will be in the download folder on your sd
Sent from my PC36100 using XDA Premium App
I'm going to try leaving it on the charger to see if it is just the light that is going bonkers with my phone. While the phone was off (after pulling the battery for 10-15 minutes), I plugged in the phone and it turned it on. That's a good sign that it recognized the charger, right?
My coworker isn't going to let me use his battery.
staveflyer said:
I'm going to try leaving it on the charger to see if it is just the light that is going bonkers with my phone. While the phone was off (after pulling the battery for 10-15 minutes), I plugged in the phone and it turned it on. That's a good sign that it recognized the charger, right?
My coworker isn't going to let me use his battery.
Click to expand...
Click to collapse
Yeah that's a good sign. And wtf that is very unchill of him.
Sent from my PC36100 using XDA Premium App
PhxkinMassacre said:
Yeah that's a good sign. And wtf that is very unchill of him.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I turned WiMax on for a sec and at least the network started working for me. I installed Kernel Manager again and downloaded Godmode. Of course, I turned WiMax back off.
I was sitting here plugged in for 10 minutes at 17%.
I guess my coworker didn't get my hints, but when I flat out asked him, he is letting me charge my battery in his phone, which is working. You boys ...
staveflyer said:
I turned WiMax on for a sec and at least the network started working for me. I installed Kernel Manager again and downloaded Godmode. Of course, I turned WiMax back off.
I was sitting here plugged in for 10 minutes at 17%.
I guess my coworker didn't get my hints, but when I flat out asked him, he is letting me charge my battery in his phone, which is working. You boys ...
Click to expand...
Click to collapse
Well at least you got it, and being blunt wins again.
I will post when I try your method, though I'm worried I'm going to have the same problem with my Power button not working like a Select button. It's incredibly nerve racking when your screen just powers off.
Thanks for all the help. Don't worry, I'm hitting the Thanks button, too.
staveflyer said:
I will post when I try your method, though I'm worried I'm going to have the same problem with my Power button not working like a Select button. It's incredibly nerve racking when your screen just powers off.
Thanks for all the help. Don't worry, I'm hitting the Thanks button, too.
Click to expand...
Click to collapse
Well I think the problem will be solved if he's letting you charge your battery in his phone, and its not needed to hit it, but thank you, and you're welcome.
PhxkinMassacre said:
Well first try letting the battery cool down just turn off your phone for like 15 min. And see if that works.
If that dont work try this and since you use kernel manager try this.
1.go into the settings of kernel manager and turn off the setting for auto flashing.
2.download the godmode kernel towards the bottom of the list.
3.steel your friends battery with his permission since your running out.
4.boot into recovery and wipe cache/dalvik.
5.(now I take it your in clockwork and not amon since you running cm7 so I'm not sure what you click to do this since unused amon) but go to flash a zip from SD card and look for a folder on the root of your SD called kernel-manager then go to the toastcfh folder and flash the godmode-v9 zip that's in there. Its a great kernel the was made for use with cm7 + all other aosp so it should work. Post your results if it did or didn't work
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
So after my coworker let me charge my battery enough to make it to the Sprint store, they charged it up to about 70% and I wiped and flashed GodMode. All better! It got stuck in a boot loop so i had to reboot but then it was fine. Thank you!
Completely unrelated, but now Launcher Pro Plus is throwing an error and force closing upon start up.
staveflyer said:
So after my coworker let me charge my battery enough to make it to the Sprint store, they charged it up to about 70% and I wiped and flashed GodMode. All better! It got stuck in a boot loop so i had to reboot but then it was fine. Thank you!
Completely unrelated, but now Launcher Pro Plus is throwing an error and force closing upon start up.
Click to expand...
Click to collapse
Glad you got it working, and is it just lagging, like not swiping when moving screens or opening the app drawer? if so lock the device, wait a second, then unlock again. Also check your minimum frequency.
teh roxxorz said:
Glad you got it working, and is it just lagging, like not swiping when moving screens or opening the app drawer? if so lock the device, wait a second, then unlock again. Also check your minimum frequency.
Click to expand...
Click to collapse
It's just whenever I boot up my phone, the very first time it just doesn't work and force closes. As long as I don't turn off my phone, it's fine (mabe a bit laggy, but that's it).
So now that i have been home, my data cable charges my phone just fine (though, it did take longer than usual). I'm at work again, and my charger still doesn't charge my phone! It charges my coworker's phone but not mine. SO WEIRD!
Back to the Sprint store for me ...
staveflyer said:
It's just whenever I boot up my phone, the very first time it just doesn't work and force closes. As long as I don't turn off my phone, it's fine (mabe a bit laggy, but that's it).
So now that i have been home, my data cable charges my phone just fine (though, it did take longer than usual). I'm at work again, and my charger still doesn't charge my phone! It charges my coworker's phone but not mine. SO WEIRD!
Back to the Sprint store for me ...
Click to expand...
Click to collapse
That occasionally happens, where it may take launcher pro an extra minute to load, make sure its on the internal memory to make it the fastest.
And that is weird, I would have suggest you may have been using a bad outlet or cable, but no reason for it to charge one phone and not the other. Its possible you could have a bad usb port, so I'd take it to sprint and see what they say.
So I took it to Sprint and they say I need to go back to stock and unRoot before they will work on my phone. :/
They tried different wall chargers and none work, but USB cables work as long as they are plugged into a computer or AC adapter.
Do I try flashing a different ROM? do I restore my NAND backup from before I rooted? Do I just rely on my data cable to charge my phone and deal with it? UGH.
And now I will never know if i messed my phone up with the kernel flashing business or if it was a true hardware problem.
staveflyer said:
So I took it to Sprint and they say I need to go back to stock and unRoot before they will work on my phone. :/
They tried different wall chargers and none work, but USB cables work as long as they are plugged into a computer or AC adapter.
Do I try flashing a different ROM? do I restore my NAND backup from before I rooted? Do I just rely on my data cable to charge my phone and deal with it? UGH.
And now I will never know if i messed my phone up with the kernel flashing business or if it was a true hardware problem.
Click to expand...
Click to collapse
I think it may be hardware. I only use the data cable via usb, or use the adapter for the wall outlet, and never had a problem.
What's your current setup? You can always change kernels, and if you wana unroot, shoot me a pm and I'll fix ya up.
My battery is not stable . it takes too long to complete the charge than normal . And when im using it the battery drains so faaast! When I reach the battery level : 1% I can still use it for hour . But when I rest my tablet for couple of minutes or hours ... the battery percentage go to 30% from 1% ?!!
I currently flash original firmware , but still the same.
So I just reflash my custom rom which is inspire rom by JT ..
And problem still exist!
what to do?! help pls.
I already did , battery calibration and using battery doctor app ..
Tablet: samsung galaxy tab 3 7"
Model: SM t210r
Custom rom : inspire
Kernel: werewolf 3.4.5
Anyone ? please ..
serves as BUMP
pinkLeviosa said:
Anyone ? please ..
serves as BUMP
Click to expand...
Click to collapse
Remove the back from the tablet and unplug the battery for a few minutes. Then put it back in charge fully.
i dont have any safe instruments to open it.. any diy alternatives to open it?
pinkLeviosa said:
i dont have any safe instruments to open it.. any diy alternatives to open it?
Click to expand...
Click to collapse
There are actually quite a few "Galaxy Tab 3 teardown" videos on YouTube.
calibration
pinkLeviosa said:
i dont have any safe instruments to open it.. any diy alternatives to open it?
Click to expand...
Click to collapse
Hi if ur flashing a new rom it can be cause be the battery file go to the app store and find a battery cqlibrator and let it charge to 100 then calibrate it hope i helped
dsilx said:
Hi if ur flashing a new rom it can be cause be the battery file go to the app store and find a battery cqlibrator and let it charge to 100 then calibrate it hope i helped
Click to expand...
Click to collapse
thanks , but like i said i already did it, no luck
oh
pinkLeviosa said:
thanks , but like i said i already did it, no luck
Click to expand...
Click to collapse
Sorry i couldnt help
dsilx said:
Sorry i couldnt help
Click to expand...
Click to collapse
no problem
Have you tried changing the usb cable ?
Had the same problem earlier, then tried using a friends usb cable and found that the issue was due to my cable.
pinkLeviosa said:
Anyone ? please ..
serves as BUMP
Click to expand...
Click to collapse
I know there is a method to reset the battery file but I don´t know where I read that
You have to hold some buttons for 10s while the device is off.
Try that at your own risk:
1. Turn off your Tab
2. Plug it in (wall charger)
3. Wait till it shows a charging battery
4. Press and hold menu-button 10s or more
OR
1. Turn off your Tab
2. Plug it in (wall charger)
3. Wait till it shows a charging battery
4. Press and hold menu-button + power-button 10s or more