when i try to use the zip room he tell me
amend scripting(update scripte)is no longer supported
amend scripting was deprecated by google in android 1.5
it was necessary ro remove it when upgrading to clockworldmod 3.0 gingerbread based recovery
please switch to edify scripting(updater-scrupt and update binary)
to creat working update zip packages
installation aborted
what shoult i do to install the room
- Download ROM Manager App from the Market, Open it
- Then Select Install Clockworkmod Recovery. This will install v2.5 on the SDCard
- Select Reboot into Recovery from ROM Manager
- This will take you to Clockworkmod 2.5, then you can install this ROM as usual.
Remember to perform a wipe before installing a new ROM.
Boot your current rom. Root it if not yet. Install rom manager.
Then flash 2.x recovery from ron manager. Then reboot to recovery from rom manager itself. Now install your rom.
For next time to use 2.x recovery, just open the recovery and apply sdcard update (works only if u have flashed 2.x recovery from rom manager for the last time) .
Sent from my HTC Wildfire using XDA App
3xeno said:
- Download ROM Manager App from the Market, Open it
- Then Select Install Clockworkmod Recovery. This will install v2.5 on the SDCard
- Select Reboot into Recovery from ROM Manager
- This will take you to Clockworkmod 2.5, then you can install this ROM as usual.
Remember to perform a wipe before installing a new ROM.
Click to expand...
Click to collapse
thank's so much for help
bharatgaddameedi said:
Boot your current rom. Root it if not yet. Install rom manager.
Then flash 2.x recovery from ron manager. Then reboot to recovery from rom manager itself. Now install your rom.
For next time to use 2.x recovery, just open the recovery and apply sdcard update (works only if u have flashed 2.x recovery from rom manager for the last time) .
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
thank's for help
it work he start install the room now
I have the same problem but the catch is: I installed HCDR.Jacobs kernel(http://forum.xda-developers.com/showthread.php?t=798471) while running CyanogenMod 7.1. and of course couldn't boot afterwards . Now i can't Install a ROM that will support the new kernel and i can't install the stock kernel . I am running Clockworkmod 3.0.0.6. Can someone help??? I've got to have the phone running before Saturday
P.S. Don't tell me that I'm stupid for installing the kernel, I already know that -_-
NEED some help. I had TWRP loaded on my Htc Wildfire S. I tried to Flash CM 7.2 but it said FAILED. So I installed CWM through ROM manager. The problem is now I cant get into recovery. When I try to boot in recovery the phone starts up normally. I tried it a lot of times. Still no success. PLEASE help me.!!!
Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here
csoulr666 said:
Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here
Click to expand...
Click to collapse
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)
ij345 said:
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)
Click to expand...
Click to collapse
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager
csoulr666 said:
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager
Click to expand...
Click to collapse
Yeah. I did that. I must have only CWM in my cell. I had flashed it through ROM manager.
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
updated 4.3official ane now wanna DN3 Rom v3.0
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Issue flashing DN3 rom
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
how to root in 4.3 official knox
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
but how to root ... installed 4.3 official version
patelsagar said:
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Click to expand...
Click to collapse
it is easy to root ur phone just download these
CWM---- http://forum.xda-developers.com/showthread.php?t=1901196 [download the latest one with (.TAR) extension]
samsung usb drivers---google search for them
ODIN from here----http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
now once u have all of the follow this video so that u can get every step
http://www.youtube.com/watch?list=UUA2XWPjQBJVScn7wQjeqMqA&feature=player_embedded&v=NFHZ535L7is
once ur done just update the superSU
thas for rooting need help to install the rom ask me:good:
Installing stopped at Page 1 of the Samsung apps
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
yu133 said:
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
Click to expand...
Click to collapse
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
dvn2008 said:
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
Click to expand...
Click to collapse
Thanks guys for the help.. will download the philz 5.15 then and do it. anyways, ru guys having any problems with the ditto rom? does it hand when u multitask, etc?? coz i heard fr my frens that it hangs often...
appreciate your feedback guys. Thanks
ijsiregar said:
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
Click to expand...
Click to collapse
I just signed up to say THANKYOU.... install Touchphilz 5!! it works than especially when you install DN3 v.3.1 or above!! thanks again!
Ditto Note 3 -> 3.2
DN3 rom work perfectly for me so far starting from v3 and now in v3.2.
I flashed DN3 rom in following sequence:-
(i) I came from MK4 Wanamlite previously and then I flash TWRP v2.6.0.3 via Odin
(ii) then I flashed MJ5 bootloader (downloaded from JoelDroid rom site) before installing DN3 rom
(iii)then I flashed DN3 v3 successfully.
With the DN3 v3.2 update, I tried dirty flash without wipe but hell lots of problems so finally I did full wipe, format data and then
clean install DN3 v3.2 anf all working perfectly so far including all the Note 3 features.
problem
hi
after i install dn3 ROM i can't make a call the imei is good but not registered to network
please help me
i got the same problem on 7105 Imei but no network, and stuck in factory mode, changing to on and running terminal script didnt help
i just updated 4.4.2 KK official version note 2 but now i wanna DN3 Rom without root..can i use DN3 rom feuture in my phn..
ota 3.2.1
Hi
I have one problem with OTA uppdate
I can't uppdate to 3.2.1
When I push uppdate , displays an error message
What is a problem?
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
Download the zip again and copy it on your sd card(maybe not copied well). This happens to me too
I was trying to install CWM recovery on this phone , I used Odin to flash recovery . I flashed recovery then removed battery and then booted to recovery then CWM loaded but as soon as I restarted the phone and again tried opening recovery phone took me to stock recovery , how can I solve this? I am running 4.2.2 firmware . And also I tried flashing CM11 with this temporary CWM but package installation stopped because of a error (status 7) saying some problem with partition , I was not rooted at the time . Is root needed to flash CM11 ?
cyb3r.pr3dat0r said:
I was trying to install CWM recovery on this phone , I used Odin to flash recovery . I flashed recovery then removed battery and then booted to recovery then CWM loaded but as soon as I restarted the phone and again tried opening recovery phone took me to stock recovery , how can I solve this? I am running 4.2.2 firmware . And also I tried flashing CM11 with this temporary CWM but package installation stopped because of a error (status 7) saying some problem with partition , I was not rooted at the time . Is root needed to flash CM11 ?
Click to expand...
Click to collapse
1. Once u boot into CWM recovery flash SuperSU (If u don't have get it from here). This will ensure that the recovery doesn't revert back to stock.
2. Status 7 error has various reasons. Ensure that u r using most latest recovery and perform clean install.
Trilochanaaya said:
1. Once u boot into CWM recovery flash SuperSU (If u don't have get it from here). This will ensure that the recovery doesn't revert back to stock.
2. Status 7 error has various reasons. Ensure that u r using most latest recovery and perform clean install.
Click to expand...
Click to collapse
it was telling me some error with partition like eemc when i flashed cm11 , can this be due to because i was't rooted?
cyb3r.pr3dat0r said:
it was telling me some error with partition like eemc when i flashed cm11 , can this be due to because i was't rooted?
Click to expand...
Click to collapse
First of all root your device.
Secondly install philz recovery using odin.
Then flash your desired ROM
(i suggest you aogp dual sim).
PM me if you need any help.
All the best :thumbup:
Press thanks Button
Sent From AWSOME AOGP ROM for I9082
emmc is a partition i believe, if you see such errors, recheck if you are using the correct recovery... I flashed my tablet with wrong recovery and it wiped out all my partitions. It's as good as a brick now if not worse.
hy guys im insall lolipop yasterday on my device then i want back to backup india or anther cm 11 but all recovery cant insall any rom and write (error executing updater binary in zip ) please any one help me thanks all
eslamhassan said:
hy guys im insall lolipop yasterday on my device then i want back to backup india or anther cm 11 but all recovery cant insall any rom and write (error executing updater binary in zip ) please any one help me thanks all
Click to expand...
Click to collapse
Are you using the recovery from the CM12 Lollipop thread? Try flashing a different recovery.
FoxyDrew
FoxyDrew said:
Are you using the recovery from the CM12 Lollipop thread? Try flashing a different recovery.
Click to expand...
Click to collapse
im try all recovery found in xda dev but no one can install another rom im tired about this proplem please solve my proplem you can upload any rom work and i can install it thanks
Do these… just install the CWM recovery… ..then find the backup on some threads which is the same as your phone variant then restore it..
eslamhassan said:
hy guys im insall lolipop yasterday on my device then i want back to backup india or anther cm 11 but all recovery cant insall any rom and write (error executing updater binary in zip ) please any one help me thanks all
Click to expand...
Click to collapse
Did you factory restore / Wipe data/cache
before restoring?
-If you have not I recommend doing so now.
-Now try flashing a different recovery in Fastboot USB mode; such as Philz CWM.
-Then try to install CM11.
-Now put your backup back where it needs to be:
Philz CWM: /data/media/0/clockworkmod/backup
Original CWM 6.0.5.1: /data/media/clockworkmod/backup/
If that didnt work then try from step one with factory restore in recovery mode again but now instead of flashing any recovery flash the one specifically from the CM11 Official thread then continue with your restore.
This is because it is different from the one in the actual CWM 6.0.4.8 thread.
The one from CM11 official thread is 6.0.5.1 and fixes the black recovery screen issue people have when using the one from the 6.0.4.8 thread or when flashing Philz / TWRP for the first time.
After flashing the one from CM11 Official it (allows?) the device to flash other recoveries properly.
Weird bug, I know.
Sent from my 710C using XDA Free mobile app