Related
This will officially not work for 1.1
What it does:
Enables ADB via uRamdisk
Installs su and Superuser.apk
Installs Busybox
Installs Button Savior
Installs Go Launcher
Installs NookColor Tools (To Enable Non-Market Installs)
Installs Gapps (Gmail, Market, Youtube, Others)
System Files that get Modified:
/system/build.prop - Enabling Google Check In
packages.xml - Allows Gapps to install properly.
framework.jar - Should allow a proper Android ID to generate.
Changes:
June 24, 2011 -
Removed: Multitouch Permission
Added: Modified framework.jar
June 22, 2011 - Fixed: Script not running at boot.
June 20, 2011 - Initial Release
Before you begin:
You must already have a registered Nook Simple Touch
You must have a Gmail/Youtube linked Account. IF you used a Gmail account for B&N Registration you should use that one for this process.
You must either have dd (Linux) or WinImage (Windows) software.
You must have an external microSDCard reader or this will not work. Do NOT use the Nook Simple Touch.
You must have enough intelligence to follow instructions.
Let's get started:
Download TouchNooter from here: touchnooter-1-6-24.zip
Linux: Unzip and use dd if=touchnooter-1-6-24.img of=/dev/sdcard
Windows: Unzip and use WinImage to "Restore Virtual Hard Disk Image" to your SDcard.
Windows Alternative: https://launchpad.net/win32-image-writer/+download
Power off your Nook Simple Touch.
Insert TouchNooter SDcard into your Nook Simple Touch.
Power on your Nook Simple Touch.
You should see the screen "Rooted Forever".
It will boot like normal and you should be asked to select a launcher now. (If not use Button Savior to go home. This will bring up the launcher chooser.)
That was the hard part, now to the simple stuff.
Upon boot unlock your screen.
At the Android Welcome Screen skip Sign In.
Enable Location Services when given the option.
Connect to Wifi and launch Youtube from Go Launcher's App Drawer (Or the App Drawer of your Choice).
Click the Menu button (The right one in the middle of the status bar).
Select "My Channel" and Login using your Gmail Account.
Exit Youtube and Launch Gmail from "Extras".
Sync your Gmail Account and Exit. (If it fails to sync that is fine.)
Open up Market and Accept Terms and Service.
If you made it this far your nook should be successfully Rooted. Go Download an App to make sure.
Enable Non-Market Installs by running the NookColor Tools App.
If your Youtube fails to launch Uninstall and Reinstall Youtube from /data/app
Go to Settings > Device Info > SdCard > UnMount > Format
Thanks To:
Arnold Snarb - modified framework.jar
nemith - helping me figure out getting it to run at boot.
JesusFreke - For getting root.
MrMuffin - For the original Market Hack that we're using.
Currently Working On: TouchNooter 1.11.x
I've probably screwed up, but perhaps not too badly. Tried to follow all the steps and got the system files copied to media, and then to replace the main system files, but there I got confused. I ended up rebooting without attempting to install the youtube app, which I didn't find in the download. Even now, a lot looks like it is working, but I can't even attempt to sign in to google cause I can't get a keyboard to come up to allow me to enter my user name and password. Is there any help for me, or am I a total dunce needing to start over? thanks!
EDIT: I see I am screwed -- no keyboard is coming up for me anywhere. I guess I can go through a major reset but if anyone has a suggestion to just get the keyboard back I will appreciate it.
EDIT2: Well I got past that, simply chose multitouch keyboard instead of Gingerbread in NookColor Tools.
EDIT3: But now I am stuck again as I can't sign in to a google account... says can't establish a reliable data connection to the server, even though my wifi is fine. But at least at the moment everything else is fine, though the keyboard isn't working very well (but it does work; lots of ghosting)
An .img file is being uploaded for TouchNooter 1.6.20 It'll do all the copy and edit stuff, the only thing it can't do is create an android ID.
In the "GappsAndMore" there was some keyboards which were from the NC it was just a raw pull from AN. This is more refined with things that could cause issues removed. (Like Keyboards, Framework.jars from the NC, etc.)
william1853 said:
I've probably screwed up, but perhaps not too badly. Tried to follow all the steps and got the system files copied to media, and then to replace the main system files, but there I got confused. I ended up rebooting without attempting to install the youtube app, which I didn't find in the download. Even now, a lot looks like it is working, but I can't even attempt to sign in to google cause I can't get a keyboard to come up to allow me to enter my user name and password. Is there any help for me, or am I a total dunce needing to start over? thanks!
EDIT: I see I am screwed -- no keyboard is coming up for me anywhere. I guess I can go through a major reset but if anyone has a suggestion to just get the keyboard back I will appreciate it.
EDIT2: Well I got past that, simply chose multitouch keyboard instead of Gingerbread in NookColor Tools.
EDIT3: But now I am stuck again as I can't sign in to a google account... says can't establish a reliable data connection to the server, even though my wifi is fine. But at least at the moment everything else is fine, though the keyboard isn't working very well (but it does work; lots of ghosting)
Click to expand...
Click to collapse
I'd suggest a wipe and running TouchNooter... GappsAndMore had Keyboards and stuff in it and removed the stock keyboard =\
is a wipe in the nook touch holding down the power for 20 seconds?
No you need to do a complete wipe by triggering recovery, but I don't know how to trigger recovery yet.
oh well the perils of early adoption. I'll follow the thread with anticipation!
william1853 said:
oh well the perils of early adoption. I'll follow the thread with anticipation!
Click to expand...
Click to collapse
You could try 8 failed boots. Basically you power it on and then power it off before it fully boots. Do that 8 times and it might trigger recovery.
Confirmed this works great. I'm going to find a fix for the calendar.
GabrialDestruir said:
You could try 8 failed boots. Basically you power it on and then power it off before it fully boots. Do that 8 times and it might trigger recovery.
Click to expand...
Click to collapse
Recovery is holding the power button for 20+ seconds it will trigger recovery
xboxexpert said:
Recovery is holding the power button for 20+ seconds it will trigger recovery
Click to expand...
Click to collapse
Really? Is that from when it's off?
GabrialDestruir said:
Really? Is that from when it's off?
Click to expand...
Click to collapse
Not sure I have yet to try it but someone in the other thread said he called BN and they told him that and he did it.
xboxexpert said:
Not sure I have yet to try it but someone in the other thread said he called BN and they told him that and he did it.
Click to expand...
Click to collapse
I tried it and all I could get was it turning on and off
TouchNooter 1.6.20
This doesn't seem to work for me at all... I tried restoring the backup image and starting from scratch and it still will not work. I tried enabling Google Apps manually and it won't work for me either.
I think I'm done, if the 7th time wasn't the charm then I'm giving up for now...
MystaWright said:
This doesn't seem to work for me at all... I tried restoring the backup image and starting from scratch and it still will not work. I tried enabling Google Apps manually and it won't work for me either.
I think I'm done, if the 7th time wasn't the charm then I'm giving up for now...
Click to expand...
Click to collapse
I ran this on my Nook Touch and it worked just fine. Are you getting the "Rooted Forever" boot screen?
GabrialDestruir said:
I tried it and all I could get was it turning on and off
Click to expand...
Click to collapse
Didn't work for me either. 8 interrupted boots did.
i'm getting the rooted forever screen and then it just goes to the default stock home
any thoughts?
GabrialDestruir said:
I ran this on my Nook Touch and it worked just fine. Are you getting the "Rooted Forever" boot screen?
Click to expand...
Click to collapse
Same problem here... tried to return EVERYTHING to stock too.
yugoliang said:
i'm getting the rooted forever screen and then it just goes to the default stock home
any thoughts?
Click to expand...
Click to collapse
I did a reset of the device back to the out of the box experience, registered with my BN account, shut down and followed the directions to the letter. I had no luck at all. It just shows the Rooted Forever screen, then boots normally is if nothing happened.
Sorry Guys and Gals. Entirely my fault. It seems a combination of my own forgetfulness and bad scripting (I forgot proper codes and methods used in AN) caused this just to do nothing. I'm uploading a version as I'm typing this and will remove "BROKEN" from the title when it's up.
Still broken. init.rc isn't running it's script properly.
Script can be ran manually with:
Code:
adb shell sh /sdcard/nooter/tmp/scripts/Nooter
Will be working on getting it to trigger properly
This Thread is outdated!
I will update it soon!
Thanks for your understanding
Hello everybody,
as there is no sub-forum for the new nook simple touch (help to get one),
all information are split on several posts in the nook color forum.
I want to create a central thread which list all the knowledge and work that is already done.
The most solutions are NOT my work!
I will link to the post and add the author,
please thank them for their work.
Basics
Update
There is an update for the nook touch!
(not recommended for now)
Checkout the discussion: Nook STR update 1.0.1
Screen Refresh
To avoid ghosting you can easily refresh the screen by pressing the n button twice (open and close default launcher).
Hidden back "button"
You can easily go back by swiping in the middle of the topbar from right to left.
(You may need this in stock apps / settings, after getting root you get 2 buttons for menu and back on this area)
Hidden Browser
you can access a browser by typing in an url into the searchbox,
but the browser doesn't work well...
liliputing.com nook touch browser (no root)
Backup
Backup/Restore N2E by jocala
Windows HowTo is on the second post
Factory Reset / Recovery
[TOOL] nookRestore { Nook Touch - Factory restore | recovery } by ros87
B&N - nook Support
Rooting:
Please take the time and get a backup of your nook!
nookdevs.com NookTouch Rooting (linux, mac, windows)
JesusFreak of nookdevs make all this possible!
Here you can find his original guide.
TouchNooter (linux, mac, windows)
GabrialDestruir said:
Enables ADB via uRamdisk
Installs su and Superuser.apk
Installs Busybox
Installs Button Savior
Installs Go Launcher
Installs NookColor Tools (To Enable Non-Market Installs)
Installs Gapps (Gmail, Market, Youtube, Others)
Click to expand...
Click to collapse
Root & Setup Script Kit (windows only)
xboxexpert said:
Full Superuser Access
Updates are permanently blocked!
Unknown sources Enabled (install non-Market applications)
adb debugging is active [mostly for developers]
Ability to replace the Authors ****ty pictures
Ability to remap the left buttons to Menu & Back
Market Installed & Working! Login to YouTube with your GMAIL!
Software Included:
AdFree (Block those nasty ad's) [Wi-Fi needed]
Button Savior (Displays Softkeys)
gTab simi Clock (really awesome clock for your desktop)
Kindle (read your Kindle books on Nook, lol) [Wi-Fi needed]
LauncherPro (default launcher instead of Nook base launcher)
Superuser (provides a list of applications that use superuser access)
Click to expand...
Click to collapse
Advanced:
(need root)
adb
WiFi
by default you can only use wifi to connect to your nook!
Please consider that anyone in your network can connect to your nook!
This is a serious security problem!
mycr0ft modified the uRamdisk to disable adb over wifi by default! (not tested)
Code:
adb connect [I]NOOK-IP[/I]
USB
xor_ uploaded a uramdisk with adb usb enabled
and traycold has found drivers for windows (thanks to cceerrtt)
xboxexpert modified the adb usb driver to work with the n2e. (not tested yet!)
[GUIDE] ADB Workshop and Guide for everyone
Remapping Hardware Buttons
n Button
[MOD+APP][11Oct11] Configurable "n", "reading now", "RecentDialog" + Activity Picker!
XorZone said:
Features of mod
* Will return stock android go to home by short press of "n" button and recent apps dialog on long press (Configurable)
* All B&N quicknav buttons configurable, it even loads apps icons (after reboot)
* Reading now" button configurable
* NOTE: Installation of the jars w/o conf will have stock B&N effect + recent apps
Features of application
* Implements Activity Picker, so any app (i.e. Launcher Pro) can use "Shourtcuts" dialog that B&N removed.
* Configuration UI for above mod
* (In future) Configuration UI for page buttons
Click to expand...
Click to collapse
Page-Turn Buttons
The main thread is from xboxexpert,
the user aruangra shows how to map the keys to volume up/down so you can use it for scrolling in some applications
Softbutton
Softbuttons can add little buttons to your user interface which simulate the normal android buttons (Home, Back, etc.),
Button Savior is working very well.
OMGWTF_BBQ modded it for the eInk Display.
Market & gapps
If you have already rooted and want to enable the market by yourself you can use the tutorial on nookdevs from the nook color. GabrialDestruir have tested this and confirmend its working.
Additionally i have written down some steps to activate it by using resources of the touchnooter script.
GabrialDestruir updated his script, i dont know if my tutorial still works
AFTER you get the market working you can
update the market and gapps
or, just update the market.
This will fix the market search too
Language / Locale Settings
If you live outside of the USA and managed to get a nook,
there are a few steps to customize the system to your locale / regional enviroment.
To change the system language and the keyboard you can look here:
customize language
Timezone and 24:00 Clock can be set on the default settings menu
(On first-start-setup you can only choose US-Timezones)
Landscape / Screen Rotation
[APP] Orientation Switch by XorZone
on LauncherPro you have to enable Auto-Rotation (thanks to densets)
AdHoc WiFi
If you want to connect to an AdHoc WiFi you can checkout a fix for the nook color:
[FIX] AdHoc Wifi support on the NC! thanks to markmc87 & jago25_98
Misc:
Wallpapers
OMGWTF_BBQ made some nice wallpapers
The Wallpaper from the Video by OMGWTF_BBQ
Michael.Rose made a pencil sketch of it
Videos
XDA-User OMGWTF_BBQ upload a Nook2 Root Tour on youtube
JesusFreak's proof his working root with Angry Birds on Nook Touch
The Nook Touch has a Web Browser - No Root Required!
Gizmo - Nook Simple Touch Reader
B&N The All-New NOOK Guided Tour
App info
✔ Kindle, Kobo, txtr, Aldiko, Moon+, FBReader
ryanpl write together a list of supported apps
OMGWTF_BBQ Root Tour Video
You can try all other apps for Android 2.1
NOT WORKING:
xda-developers (some threads shows a blank page)
Pulse News (crash after initial screen)
(version from nook color market is working)
Skype (freeze on login screen)
Tricorder (system freeze)
Hardware/Software specs
Icehawk78 posted some system information on request.
stock-kernel:
MystaWright said:
VERSION = 2 | PATCHLEVEL = 66 | SUBLEVEL = 29
(2.6.29-omap1)
Click to expand...
Click to collapse
Links:
New Nook 2 eInk Reader Announced! Available for Preorder
Nook Touch Root Guide is OUT.
[REQUEST] B&N Nook Simple Touch forum
[N2E] Nook 2nd Edition Touch - Root
[N2E] Nook 2nd Edition Touch - Development
[N2E] TouchNooter 1.6.24
[NST] Root/Market & Setup Script Kit
[N2E] Nook Touch - App Support for Hardware Buttons
[N2E] Recovery & Source for Nook Touch
[N2E] Nook Touch n-button mapping
[N2E] modified framework.jar
Backup/Restore N2E
[NC]/[N2E] Warning!
Nook STR update 1.0.1
[APP] Orientation Switch
[MOD+APP][11Oct11] Configurable "n", "reading now", "RecentDialog" + Activity Picker!
[TOOL] nookRestore { Nook Touch - Factory restore | recovery }
[N2E] Nook ADB over USB on linux.
Nook Touch kernel hacking
[FIX] AdHoc Wifi support on the NC!
[Q] [POLL] Do we need NST specific launcher? If Y - how should it look like?
nookdevs.com NookTouch Rooting
ReviewHorizon.com Root Guide
Mike Cane's xBlog - Nook Touch Rooting: June 27th News
IRC: #nookdevs @freenode
B&N All-New NOOK Porduct Website
B&N nook Support
THANKS TO ALL OF YOU!
If i forget something or got something wrong, please feel free to complete this thread!
... reserved ...
First
Sent from my SPH-D700 using XDA App
What's the consensus as to the best launcher to use...
I currently use ADW, which seems to work ok. Biggest complaint is I can't see the text on the settings menus...
I prefer a white backgounnd. So ADW seems to be an only option. I am using ADW EX.
updated the fist post,
thanks to DenisTheMenace for the info about adb usb drivers,
the mod/person who made this stickie,
and again all of you
Xhorder said:
What's the consensus as to the best launcher to use...
I currently use ADW, which seems to work ok. Biggest complaint is I can't see the text on the settings menus...
Click to expand...
Click to collapse
iam using ADW too,
i like it more than Go Launcher or LauncherPro
but when i tried them i recognized some empty settings menus too,
so i dont think its the launcher that shows the settings menus without text...
rev0l said:
so i dont think its the launcher that shows the settings menus without text...
Click to expand...
Click to collapse
It's not without test, the test is white on white background, that's why we don't see anything.
I got pulse to work, I used the pulse from the nook apps shop.
mkenney12 wrote me a pm.
he wants that everybody consider the consequences of using a rooted nook touch.
its definitely a point that everyone has to keep on mind!
rmkenney12 said:
Hi,
I'm not sure who to send this to in the xda-dev
community, but noticed that you were maintaining
the KB articles for the Nook Touch root. I tried
posting to the touchnooter dev thread, but I don't
have the requisite 10 messages, so I couldn't even
thank them.
I've been able to root my N2E with the
touchnooter root: the most recent 1.6.24. I'm
extremely happy with the results, but am having a
major concern that doesn't appear to be getting
proper coverage in that or other roots. (I initially
tried the noogie root with lesser results).
<Rant On>
IE, adb wireless/wifi access.
Nobody seems to be expounding on the fact that
it's an enormous freaking barn-door-size gaping
hole in the security of the N2E(or doing anything
to eliminate it). You yourself mention it in
passing in your KB article, but only give it a single
line.
Essentially, once these things are rooted, they
are -enormously- vulnerable if they are taken out
into the public, either at a Barnes&Noble store,
or at any other hotspot. All it takes is for a hacker
sitting there at that hotspot with a laptop, scanning
all of the IP's in that subnet for IP's that respond
to the adb port, and they can do a simple
#adb install MyFavBotController.apk
or somesuch thing. If adb pukes on them(IE, it's a
non-rooted Nook), then they just keep scanning.
Unless you're sharp and see the notification tab
popping up, you may never notice it. They can
install any freaking thing they want on your Nook.
Evetually you've got hundreds or thousands of
infected Nooks running bots, or some other fun
little thing(s) implanted on them.
Everybody seems to be incredibly happy about how
easy it makes their experimentation, and all of the
root developers seem to be focused on making sure
that adb wireless is enabled, either in the startup
scripting or even in the uRamdisk as with the
touchnooter root.
Sure, you can install the adbWireless app from the
market, and it will turn off adbWireless, but:
a) when you initially run the adbWireless app, it
doesn't even properly report that the adb wifi
function is on. It reports it as off, even though
it's actually still responding to adb connects.
So now you have to remember to turn it on,
and then back off. That does work(for a little
while).
b) it's not permanent with some roots, like the
touchnooter. I disable adb wifi with the
adbWireless app, it's off, and everything is nice
and safe? if I put my N2E through a power
cycle, guess what. It's been turned right back
on again. That's completely whacked.
1) For one thing, as an older person I may
forget to use adbWireless to keep turning
adb wifi off after power-cycles. Over and
over and over again.
2) Even if you remember, there's a window of
access during power-up that's about 30-60
seconds long before you'll be able to run
adbWireless to shut things down. A hacker
could do a lot of damage to your Nook in
that time.
3) I have heard rumors of Nooks turning
turning themselves back on after being
powered off. So now you could be in a
hotspot, your Nook could turn itself on in
your knapsack without you even knowing,
and the hacker sitting there has all the
time in the world to beat on your poor little
Nook.
It's BONEHEADED. adb Wifi should NOT EVER be
automatically turned on by the bootstrap. NEVER.
If developers of these roots want to make it easy for
the users or other devs using them, then simply
bundle the adbWireless application along with
SuperUser, Yahoo, and the other apk's they've
included in their root distro's.
Let the -users- decide when and where it's safe for
them to use adb Wifi. Devels are NOT doing them a
service by forcing adb Wifi on them, or encouraging
them to use it under dangerous circumstances.
</Rant Off>
Sorry, but I have a rooted Nook that I'd like to take
outside the confines of my home. Unfortunately,
I don't dare to now. So yah, I'm feeling cranky :-(
rev0l. -please- pass this on to any developers
you might have contacts with.
Thank you!
= Glucosaurus
Click to expand...
Click to collapse
i dont know if someone can disable the access over adb by default...
may you can use apps like tasker or automate it to disable wifi when your accesspoint is not in range or start the adbwifi app while connecting to a public wifi.
Xhorder said:
What's the consensus as to the best launcher to use...
I currently use ADW, which seems to work ok. Biggest complaint is I can't see the text on the settings menus...
Click to expand...
Click to collapse
I love Zeam.
I think that the best way to avoid the wireless adb security hole would be to enable adb over usb and disable adb wireless if it is possible.
I have read on irc someone (maybe JesusFreke) saying that we just have to do something like modifying adb or doing something else (I don't remember very well)
I'm also trying to find out how to adb with usb. In particular I'm looking to get my N2E to connect to my iPhone running MyWi 4.0. I've read that the nookdevs Ad-Hoc_WiFi wpa_supplicant file for the NC will work with the N2E, but I haven't found a way to connect with USB and I'm too scared to try it over wifi in case it goes wrong and I won't be able to connect with adb over wifi to fix it. Any help would be much appreciated.
Edit :
Managed to get ad-hoc wifi working by pushing the fixed wpa_supplicant.adhocfix file to the /system/bin/ folder with adb over wifi.
Then, I switched the wifi off on the N2E and opened terminal emulator and did the following :
Code:
su
adb shell mount -o rw,remount -t ext2 /dev/block/mmcblk0p5 /system
mount
cd /system/bin
mv wpa_supplicant wpa_supplicant.old */make backup of original wpa_supplicant file/*
mv wpa_supplicant.adhocfix wpa_supplicant
chmod 755 /system/bin/wpa_supplicant
exit
I am now able to connect to my iPhone's MyWi hotspot.
For security when connecting to a public hotspot, I have installed the ttxapps wifi adb app from the android market and turned off adb over wifi, meaning I can toggle it on only when I wish to connect on my home network.
does anyone have system restore image?
another pm from a user that cant post
J.Harmon said:
I figured out how to get a full factory "re-image" of my nook touch.
I followed the instructions for the nook color here:
Method two: Set the Boot counter to 8 by typing
http://nookdevs.com/Flash_back_to_clean_stock_ROM
I rooted my nook touch using touchnooter. Loaded up the amazon app store and played around for a while. But I found after I rooted the nook that the nook store didn't work any more. So i wanted to get back to factory state. I then installed the wireless adb app. I logged in to my nook using my linux pc and followed the above directions. After the re-image you have to do a data reset by going in and restoring to factory settings in the nook itself.
As soon as I gave the reboot command it started the re-image as seen in this link:
https://lh3.googleusercontent.com/-p...2E_Restore.JPG
I'm sending you this message because I'm a "noob" and can't post in the developer forums. So if you wouldn't mind reposting for the others to use.
Click to expand...
Click to collapse
Was anybody else able to get to "Restoring Factory Image..." dialog?
It happened to me after 20+ resets, I was just searching for bricked N2E solution and kept on pressing the button... I would like to know how to replicate this again
i tried it with the 8 times boot failure method, it brings up the factroy reset screen, but it does not the reall factory reset, root and some other stuff were still n the nook after this "factory reset" don't know..
and don't tried (or even read) the method from the pm...
too busy at the moment :/
Inspired by rmkenney12 (and rev0l), I updated the uRamdisk file from TouchNooter 1.6.24 so that adb over wi-fi does not run at boot.
Disclaimer: Don't try this unless you know how to restore your nook in case it does not work.
To install the new uRamdisk:
Unzip the attached file somewhere, then...
Code:
adb connect <nook>
adb shell mkdir /cache/boot
adb shell mount -o rw -t vfat /dev/block/mmcblk0p1 /cache/boot
adb push <path>/uRamdisk /cache/boot
adb reboot
Cross your fingers and hope it works.
You will also want to download an app to turn adb on and off. Search market for 'wifi adb'.
P.S. Does anyone know specifically what needs to be changed in the uRamdisk to enable adb over usb?
This guide isn't working for me. It says that after you create a noogie sd card, just pop it in, start the nook and it will mount the 7 partitions....
What 7 partitions? They never show for me. When I start the nook with the card inside it mounts the "boot" partition which is 64.8 out of 74.7 megabytes.
That's it. That's all I see. Inside of this partition are the files that were contained in the noogie image.
ibex333 said:
This guide isn't working for me. It says that after you create a noogie sd card, just pop it in, start the nook and it will mount the 7 partitions....
What 7 partitions? They never show for me. When I start the nook with the card inside it mounts the "boot" partition which is 64.8 out of 74.7 megabytes.
That's it. That's all I see. Inside of this partition are the files that were contained in the noogie image.
Click to expand...
Click to collapse
wrong thread?
which guide do you mean?
anyway, i don't know if windows can recognize all partitions...
download a live cd linux and try again
Ok... This is on windows 7. I dont know how to use Linux.
I am trying to root the Nook STR and using the guide provided here. It just gets stuck at the rooted forever screen, and the rest is as described in previous post.
Hi there,
I owned a Galaxy Nexus running Jelly Bean 4.2.1 version, yakjuxw (Not rooted), GSM. I activated the Pattern Lock to prevent the kids at my relatives house messing my phone. Unfortunately, I forgot the pattern and the phone stays locked out. I have tried the pattern combinations for days but failed.
I have tried to key in my Gmail account username/password but since my phone is wifi/data switched off, I cant sign in. Moreover, I am not sure whether the USB Debugging is enabled.
I have tried some 'hole' methods recommended at some forums, but it didnt work on my phone.I hope to get access to my messages/images/some files and transfer them to my pc before reset the phone to factory setting. Please help! :-|
yu_buffon said:
Hi there,
I owned a Galaxy Nexus running Jelly Bean 4.2.1 version, yakjuxw (Not rooted), GSM. I activated the Pattern Lock to prevent the kids at my relatives house messing my phone. Unfortunately, I forgot the pattern and the phone stays locked out. I have tried the pattern combinations for days but failed.
I have tried to key in my Gmail account username/password but since my phone is wifi/data switched off, I cant sign in. Moreover, I am not sure whether the USB Debugging is enabled.
I have tried some 'hole' methods recommended at some forums, but it didnt work on my phone.I hope to get access to my messages/images/some files and transfer them to my pc before reset the phone to factory setting. Please help! :-|
Click to expand...
Click to collapse
You can reset the phone to Factory settings.
1. Turn off your phone.
2. Press vol up+vol down+power buttons till it vibrates. Now you see a dead android.
3. Navigate with your volume buttons to "Recovery Mode" and select it with the power button.
4. When its booted you should see a soort of menu.
5. Select "wipe data" (or something like that). THIS WIPES YOUR DATA AND YOUR INTERNAL STORAGE (music, pictures etc..)
6. Select reboot system now.
7. Done.
Sent from my Galaxy Nexus using XDA Premium HD app
Without wiping out the data
mrgnex said:
You can reset the phone to Factory settings.
1. Turn off your phone.
2. Press vol up+vol down+power buttons till it vibrates. Now you see a dead android.
3. Navigate with your volume buttons to "Recovery Mode" and select it with the power button.
4. When its booted you should see a soort of menu.
5. Select "wipe data" (or something like that). THIS WIPES YOUR DATA AND YOUR INTERNAL STORAGE (music, pictures etc..)
6. Select reboot system now.
7. Done.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thank you for the reply. But, I wish to get access to my files in order to transfer them to a save location before reset the phone to Factory settings. Is there a way to hack into the device without wiping out the data?
Try this out.
http://en.miui.com/thread-5684-1-1.html
ATTACK said:
Try this out.
http://en.miui.com/thread-5684-1-1.html
Click to expand...
Click to collapse
Call yourself from another phone and answer, after that your phone will probably get unlocked.
In ADB or some other way to access the file system in Recovery Mode
navigate to /data/system and
delete password.key and/or gesture.key
- reboot.
Password/Gesture Lock gone.
You can use AROMA File Manager in Recovery (would have to sideload it if you didn't pre-install it)
http://forum.xda-developers.com/showthread.php?t=1646108
Good luck. Post back with your solution.
Trying...
ATTACK said:
Try this out.
Click to expand...
Click to collapse
Thank you for the link. I am downloading the Cygwin on my Windows Vista machine. Slow broadband speed has actually delayed my work.
Sideload
jpinsl said:
In ADB or some other way to access the file system in Recovery Mode
navigate to /data/system and
delete password.key and/or gesture.key
- reboot.
Password/Gesture Lock gone.
You can use AROMA File Manager in Recovery (would have to sideload it if you didn't pre-install it)
http://forum.xda-developers.com/showthread.php?t=1646108
Good luck. Post back with your solution.
Click to expand...
Click to collapse
Thank you for the help. What do you mean by sideload? I am using a Galaxy Nexus which has no SD slot.
yu_buffon said:
Thank you for the help. What do you mean by sideload? I am using a Galaxy Nexus which has no SD slot.
Click to expand...
Click to collapse
Please use the search function:
http://forum.xda-developers.com/sitesearch.php?q=sideload
adb method failed
ATTACK said:
Try this out.
/QUOTE]
Hi, I have used the Mint Live session instead. When I type <adb shell>, it returns <error no device found>. What should I do? Please help.
Click to expand...
Click to collapse
I am a noob
jpinsl said:
Please use the search function:
Click to expand...
Click to collapse
Hi, I have searched about sideload. I have never rooted my phone before and having difficulties in understanding the android features. Can you provide me a walk-through on how can I install the recovery on my locked out phone and access my files please.
FYI, I tried the adb method listed above, but the terminal returns <error no device found>. I tried the method on Mint (linux) live session.
I managed to get access to my data. Messages are the only thing I am losing out. Thank you XDA guys.
Great NEWS
I've been bricked for few day now.
While searching the web I found this OUYA forum post and thought it might work on th FTV too.
http://forums.ouya.tv/discussion/1380/recovery-mode
I just had to try. IT WORKED!
1 - Plug in a USB keyboard. May have to be wired.
2 - While booting - Press Alt+PrintScreen/SysRq+I
3 - Repeat 1-3 times. You should get to Update screen.
4 - Press the HOME button on the keyboard.
5 - YOU HAVE RECOVERY MODE!
I selected Factory Reset.
It took a little longer to boot. Prompted for missing remote & press Home.
Signing in NOW!
Will add pictures doon.
https://www.dropbox.com/s/vod5lhc5jvcegtv/20140629_195903.jpg
https://www.dropbox.com/s/3qh6sbibugf5pbd/20140629_185422.jpg
https://www.dropbox.com/s/u7faby39fkqd9gt/20140629_185430.jpg
Update:
I rebooted to see if I could get into recovery again.
I got back on the update screen but the Home button wouldn't put me in recovery mode this time. The KB seemed dead.
I was using the keyboard connected through a hub this time. Would that matter? IDK
Could not reboot with Ctrl-Alt-Del
Pulled the power plug & replugged and it booted fine.
Hey, dude, thats amazing!
Did you tried another options?
It's possible with mac keyboard, may be alternative combination exists.
There's not printscreen button on keyboard.
Great Find! :good:
EDIT: I just got to recovery by doing this:
1- boot up normally
2- adb shell
3- su
4- reboot recovery
5- at update failed screen press home
6- PROFIT??
iRet said:
Hey, dude, thats amazing!
Did you tried another options?
It's possible with mac keyboard, may be alternative combination exists.
There's not printscreen button on keyboard.
Click to expand...
Click to collapse
Thanks -
No, on the other options.
I thought for sure the factory reset would let me boot my FTV again - and it did.
I don't k know about mac KBds
{ParanoiA} said:
Great Find! :good:
EDIT: I just got to recovery by doing this:
1- boot up normally
2- adb shell
3- su
4- reboot recovery
5- at update failed screen press key combo- alt + print screen + i
6- back at update failed screen press home
7- PROFIT??
Click to expand...
Click to collapse
I'm sure your way is the preferred way.
It feels good to be able to boot up normally again.
Glad you got back to working condition
{ParanoiA} said:
Great Find! :good:
EDIT: I just got to recovery by doing this:
1- boot up normally
2- adb shell
3- su
4- reboot recovery
5- at update failed screen press key combo- alt + print screen + i
6- back at update failed screen press home
7- PROFIT??
Click to expand...
Click to collapse
This is nothing new (using adb to reboot into recovery). But it's not useful when you brick the OS and there is no ADB.
The OP found the way into the recovery w/o an OS, which is pretty key to unbrick your firetv, as long as you have a working recovery partition. Now we can also do complete flashes via update from adb (which probably allows sideloading the OTA packages).
{ParanoiA} said:
Glad you got back to working condition
Click to expand...
Click to collapse
Thanks
wow great find dude I just unbricked my first FTV using this method with a logitech k400. These things are damn near brick proof now!
alwaysbless said:
wow great find dude I just unbricked my first FTV using this method with a logitech k400
Click to expand...
Click to collapse
Awesome news!
Glad it helped.
alwaysbless said:
wow great find dude I just unbricked my first FTV using this method with a logitech k400. These things are damn near brick proof now!
Click to expand...
Click to collapse
Which key on the k400 is sysrq?
Sent from my Nexus 5 using Tapatalk
awsome!!!
awsome!!!
thank u very much!!!!
Luxferro said:
Which key on the k400 is sysrq?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
FN+Insert
Can someone give precise instructions to navigate the "update screen menu" blind? On my TV, the menu is completely cropped out. I don't even know if it's appearing when I press Home.
Does the menu come up instantly when you press Home on the Update Failed Screen?
Is it okay to press Home several times, or does that make the menu go away/toggle?
When you press Home, is the first menu item already selected or do you need to press down once to highlight the first menu item?
To get to the factory reset options do you press: Home > Down > Down > Enter?
Also, has anyone tried the "update from ADB" option? Does this enable ADB? Is it ADB over wifi or usb only? I ask mainly because factory reseting doesn't help those with a "host file softbrick" (where a modified host file is blocking initial registration). Those people need a way to get to the host file, which factory reseting doesn't touch.
fireTVnews.com said:
Can someone give precise instructions to navigate the "update screen menu" blind? On my TV, the menu is completely cropped out. I don't even know if it's appearing when I press Home.
Does the menu come up instantly when you press Home on the Update Failed Screen?
Is it okay to press Home several times, or does that make the menu go away/toggle?
When you press Home, is the first menu item already selected or do you need to press down once to highlight the first menu item?
To get to the factory reset options do you press: Home > Down > Down > Enter?
Also, has anyone tried the "update from ADB" option? Does this enable ADB? Is it ADB over wifi or usb only? I ask mainly because factory reseting doesn't help those with a "host file softbrick" (where a modified host file is blocking initial registration). Those people need a way to get to the host file, which factory reseting doesn't touch.
Click to expand...
Click to collapse
Hope this helps. Better pic. FTV recovery menu looks just like the ouya.
http://ouyaforum.com/showthread.php?4247-How-To-Put-OUYA-In-Recovery-Mode
[email protected] said:
Hope this helps. Better pic. FTV recovery menu looks just like the ouya.
http://ouyaforum.com/showthread.php?4247-How-To-Put-OUYA-In-Recovery-Mode
Click to expand...
Click to collapse
On the Fire TV, do you navigate the recovery menu with the keyboard up/down arrows?
fireTVnews.com said:
Also, has anyone tried the "update from ADB" option? Does this enable ADB? Is it ADB over wifi or usb only? I ask mainly because factory reseting doesn't help those with a "host file softbrick" (where a modified host file is blocking initial registration). Those people need a way to get to the host file, which factory reseting doesn't touch.
Click to expand...
Click to collapse
Stock recovery does not work with ADB over USB. And it doesn't have ethernet or wifi drivers. So "update from ADB", which is sideload, will not work on stock recovery.
fireTVnews.com said:
On the Fire TV, do you navigate the recovery menu with the keyboard up/down arrows?
Click to expand...
Click to collapse
You can use the keyboard arrows, but the keyboard must be plugged in before recovery starts.
fireTVnews.com said:
Also, has anyone tried the "update from ADB" option? Does this enable ADB? Is it ADB over wifi or usb only? I ask mainly because factory reseting doesn't help those with a "host file softbrick" (where a modified host file is blocking initial registration). Those people need a way to get to the host file, which factory reseting doesn't touch.
Click to expand...
Click to collapse
I thought alwaysbless was host softbricked, actually.
Maybe the factory reset in recovery is more thorough than the one coming from the gui?
roustabout said:
I thought alwaysbless was host softbricked, actually.
Maybe the factory reset in recovery is more thorough than the one coming from the gui?
Click to expand...
Click to collapse
Hi actually its not , im soft bricked by host file and this jewel find method didn't:crying help :crying:
Hi everyone
i my friend gave me his firestick 4k the other day because he has managed to mess it up big time
He said that he followed a tech docter youtube video to sideload an app to remove bloatware, after being successful at this, he then used an app that clears your cache and closes all the apps for you, from what i can understand it sounded like the app "cleanmaster"
after doing that he immediately lost his internet connection, he said that there wasnt even a network section anymore, just a troubleshooting option, he then factory reset his stick but this didnt solve anything
ive got the stick setup now, ive looked in the network section and he was right, theres nothing, even in the my fire tv section where you can see the ip/mac/ssid etc, they all say "not connected"
ill attach pictures
Im willing to flash this somehow, or root it, install cfw anything, please help!
Try:
Select Settings > Network from the Fire TV menu, then Play/Pause on your remote, and follow the recommended steps.
If that doesn't work maybe reset the stick again.
I know one of the settings in the debloat tool turns off the ability to see new networks, resetting should have reenabled that switch.
carpenter940 said:
Try:
Select Settings > Network from the Fire TV menu, then Play/Pause on your remote, and follow the recommended steps.
If that doesn't work maybe reset the stick again.
I know one of the settings in the debloat tool turns off the ability to see new networks, resetting should have reenabled that switch.
Click to expand...
Click to collapse
Thanks for replying, pressing play/pause does nothing, as you can see there is nothing on the network page at all except the troubleshoot option
Factory reset doesn't work at all, doing a factory reset from the my fire tv section just makes you go back to the settings menu, using the back and right button combo does nothing either, even if you wait for the countdown to end
When he gave me the stick he had already factory reset it so there are no apps on here at all including this bloatware one you mentioned, nothing
stickpirate77 said:
Doing a factory reset
there are no apps on here at all including this bloatware one you mentioned, nothing
Click to expand...
Click to collapse
Head to the unlock, root, twrp, unbrick thread here :
[UNLOCK][ROOT][TWRP][UNBRICK] Fire TV Stick 4K (mantis)
NOTE: There have been multiple reports of devices with serial numbers containing VM190 or higher being shipped with DL-Mode disabled in BROM. These devices cannot be unlocked using kamakiri. These devices do not show up at all on USB when...
forum.xda-developers.com
If you have a stick that is from 2019 you can fix it by unlocking it and installing another firmware. This will also give you root privileges.
Regards
Bertonumber1 said:
Head to the unlock, root, twrp, unbrick thread here :
[UNLOCK][ROOT][TWRP][UNBRICK] Fire TV Stick 4K (mantis)
NOTE: There have been multiple reports of devices with serial numbers containing VM190 or higher being shipped with DL-Mode disabled in BROM. These devices cannot be unlocked using kamakiri. These devices do not show up at all on USB when...
forum.xda-developers.com
If you have a stick that is from 2019 you can fix it by unlocking it and installing another firmware. This will also give you root privileges.
Regards
Click to expand...
Click to collapse
How can I do this please? Keep in mind the stick doesn't display an IP address
stickpirate77 said:
How can I do this please? Keep in mind the stick doesn't display an IP address
Click to expand...
Click to collapse
This post may explain better mate :
[NEWBIE GUIDE] How to Unlock Bootloader/Root and install Addons FireStick 4k
None of this is my work and all recognition goes to the awesome developers that made this possible, I will link their guides in here with some minor notes for newbies like me that may had some issues trying to unlock and root the Fire Stick (FS)...
forum.xda-developers.com
It doesn't have to show ip address, follow the thread carefully. It involves opening up the stick, connecting it to pc (via the power cable) and shorting a resistor.
This will unlock the stick and let you flash brand new firmware. It's the only way to do it if your factory reset isn't working I'm afraid.
Regards
Thankyou for this fantastic response, when I've got spare time and the balls to try it I'll dive in, seems complicated but I'll give it a good go
stickpirate77 said:
Thankyou for this fantastic response, when I've got spare time and the balls to try it I'll dive in, seems complicated but I'll give it a good go
Click to expand...
Click to collapse
don't unlock your stick, use any of the method
Method 1:
reinstall the app again and turn on wifi, the wifi on the stick is disabled.
Method 2:
take out your stick, connect to your pc
wait for it boot
enter
adb devices
if it says "unauthorized"
press "Down" on remote two timesand press "select" to authorize your pcwhen it says "device"
enteradb shellsvc wifi enable
if you get "killed" error then go for method 3
Unplug your stick from PC and connect to your TV.
Method 3
Install the apk on your stick, then click on "Enable"
It will also tell you if your Wifi is disabled or not.
This app can TURN ON and TURN OFF the WIFI
Here's a proof
Hi I'm trying method 2 at the moment, but if it doesn't work how do I install the WiFi enabler APK without having WiFi?
stickpirate77 said:
Hi I'm trying method 2 at the moment, but if it doesn't work how do I install the WiFi enabler APK without having WiFi?
Click to expand...
Click to collapse
you can install the apk using adb
adb install "Wifi Enabler.apk"
Legendary! It worked! Thankyou so much, how do I mark this thread as solved? I'm new to this forum
stickpirate77 said:
Legendary! It worked! Thankyou so much, how do I mark this thread as solved? I'm new to this forum
Click to expand...
Click to collapse
You can close the thread but you'll have to contact the forum maintainer, which isn't necessary, just click the under post #8.
SweenWolf said:
You can close the thread but you'll have to contact the forum maintainer, which isn't necessary, just click the under post #8.
Click to expand...
Click to collapse
I've run into the next problem, I've installed the debloat tool, I've re enabled everything to try and clean up the mess my friend made, but when I try and deregister the stick it just goes straight back to settings, is there anything else I can do here? (he said I can have the stick now as he has a new one)
stickpirate77 said:
I've run into the next problem, I've installed the debloat tool, I've re enabled everything to try and clean up the mess my friend made, but when I try and deregister the stick it just goes straight back to settings, is there anything else I can do here? (he said I can have the stick now as he has a new one)
Click to expand...
Click to collapse
What do you mean be goes back to settings?
SweenWolf said:
What do you mean be goes back to settings?
Click to expand...
Click to collapse
I click on settings, my account, Amazon account, deregister, deregister.....
Nothing happens and I'm kicked back to the settings bar highlighting my account again
stickpirate77 said:
I click on settings, my account, Amazon account, deregister, deregister.....
Nothing happens and I'm kicked back to the settings bar highlighting my account again
Click to expand...
Click to collapse
Look, sorry for the issues, you have to do some steps.
Connect your pc to stick (using wifi)
adb connect IP:5555
then adb shell
then enter
pm list packages -d
And send me the output
SweenWolf said:
Look, sorry for the issues, you have to do some steps.
Connect your pc to stick (using wifi)
adb connect IP:5555
then adb shell
then enter
pm list packages -d
And send me the output
Click to expand...
Click to collapse
I typed ADB connect IP:5555
it said unable to connect
stickpirate77 said:
I typed ADB connect IP:5555
it said unable to connect
Click to expand...
Click to collapse
Reboot your stick (Long press "Play/Pause + Select" for few seconds)
Try deregistering, is result is same, go to developers options, turn it off and then on again.
Go to network section of the stick copy the ip address.
Then go to your pc, (make sure your Stick and PC are on same wifi network)
Enter
adb disconnect
adb connect ip:5555
Here ip is the ip address of your stick
Eg adb connect 192.168.43.123:5555
It should connect
stickpirate77 said:
I typed ADB connect IP:5555
it said unable to connect
Click to expand...
Click to collapse
Got it to connect
stickpirate77 said:
Got it to connect
Click to expand...
Click to collapse
In the shell
Enter
pm enable com.amazon.tv.oobe
pm enable com.amazon.aria
Then reboot and you will be able to deregister
Main one is oobe but enable both of them