Related
I am changing from the 4gb sd card that came with my desire to a 16 gb one.
How do i get all my data from the old sd card to my new ?
Thank you in advance
hcgl said:
I am changing from the 4gb sd card that came with my desire to a 16 gb one.
How do i get all my data from the old sd card to my new ?
Thank you in advance
Click to expand...
Click to collapse
connect the phone in "Disc Mode" copy all your data onto your computer, disconnect, change memory card to the new one, and copy and paste to the 16 gig.
Sorry I don't know any way of moving you games or apps when changing an SD card
hope this helps! good luck!
Wow, is it that easy, thanks a lot! Can someone help me about the games/apps ?
sorry to dig up this topic, but since I searched for it, here goes:
Same issue, I am changing from 8GB Micro SD to a 16GB micro SD, the catch: I am using A2SD+ and my previous 8GB has ext3 partition, so do I simply backup, change card and copy back the files or do I need to partition the new 16GB card like I did the old one, and then copy my backup?
if you want to save your ext as well, then this is best done via amon-ra recovery.
do a nandroid + ext backup of your rom with your old sd card.
put in a new sd card, formatted with ext, restore nandroid + ext then your rom and ext will be fine.
As for the fat you will have to copy as outlined above (via a pc).
Lennyuk said:
if you want to save your ext as well, then this is best done via amon-ra recovery.
do a nandroid + ext backup of your rom with your old sd card.
put in a new sd card, formatted with ext, restore nandroid + ext then your rom and ext will be fine.
As for the fat you will have to copy as outlined above (via a pc).
Click to expand...
Click to collapse
isnt it that the the nandroid backup will be stored in the SD? if so then after I do a nandroid backup, place the new blank SD and do a nandroid restore, then if it looks for any backup, then it wouldnt find anything because the old card isnt there?
sorry i suck at this...
cyberkamote said:
isnt it that the the nandroid backup will be stored in the SD? if so then after I do a nandroid backup, place the new blank SD and do a nandroid restore, then if it looks for any backup, then it wouldnt find anything because the old card isnt there?
sorry i suck at this...
Click to expand...
Click to collapse
The folder "clockworkmod" stores the Nand backups. You need to copy this to the root of your new sd card. This will be detected by Clockworkmod automatically
droidzone said:
The folder "clockworkmod" stores the Nand backups. You need to copy this to the root of your new sd card. This will be detected by Clockworkmod automatically
Click to expand...
Click to collapse
OMG droidzone you're everywhere! thanks a million man!
cyberkamote said:
OMG droidzone you're everywhere! thanks a million man!
Click to expand...
Click to collapse
Cheers
This is what I did them I got a new card, I had this in another post so just cut and pasted, my solution to moving to a new card. Bering a new member I can't post the link in here, but here is the copy of it here.
My setup, 2GB no class listed MicroSD, HTC Desire, Rooted with MoDaCo r9, with A2SD. All of my apps are on the MicroSD pretty much.
Well the MicroSD came in and I did what I know how to do, I used a cloning program that I use all the time for PCs, figured what the hell it should work.
- I plugged both of the MicoSDs using the SD adapter, then plugged the SD adapter into an SD to USB adapter and plugged them into the PC.
- I used Acronis True Image 2010 Acronis True Image , did an exact clone (called "Disk Clone" in the Acronis software), from my 2GB MicroSD to the 16GB MicroSD. Did NOT adjust any partitions or anything, had 14GB of free unused, unpartitioned space on the new card.
- Then I took the new 16GB MicroSD and plugged it back into my phone, booted, and it worked great, the phone can't even tell that it's a new MicroSD, shows same sizes and everything, as I didn't adjust any partition sizes yet.
- Then I took the MicroSD back out, plugged it back into the PC, then used another product of Acronis, called Disk Director Disk Director and then went in and expanded/resized the FAT partition to the full size, it used the free unused space to do that, and moved the partitions down the line and expands the FAT one in place.
- Plugged the card back into my phone, booted, worked great, got 15 GB plus of space now on the FAT partition. All the apps works, everything works great. It seems a little snappier and faster when loading apps now.
Side notes:
I just happened to have both of these products installed on my PC and use them all the time so that's what I used, but any Disk Cloning program that supports USB will work.
There is plenty of other "cloning" programs out there, like Norton Ghost - not free, some other pais ones. But also bunch free ones as well a list of them here , wiki list of them as well. Some of these programs are LiveCDs, which means you boot your PC of a CD and then you can edit HDs, also the USB Drives, other like Acronis will have a PC program as well a boot disk. With acorns I was able to use it just as a program no booting of a CD.
I personally have used this program called "hdclone" which is free, it has one limitations but it really is not a big deal in this case, it limits the copying to 1 GB per minute, hell for 16GB card thats 16 minutes !!! so not a limitation really. So do a exact clone using HDclone, don't resize the new SD just leave it as is, this worked for me, I think leaves everything exact as possible. Another free cloning program I have used in the past is DriveImage XML , so either of these will work to clone one SD to another. Now to resize, the product I use ALL the time to resize drives is "gparted", this one is a boot CD, so all you gotta do, plug in your SD card using the USB, boot of this small GParted CD, select your drive and then expand the FAT partition. Few extra steps with some free products but it works if you're not able to acquire Acronis.
Hope this helps, let me know if you have any questions or problems. Sorry for the long write up but haven't seen anybody describe doing this plus some people aren't as familiar with cloning HDs as others.
Help!
I just went in to recovery mode with CWM and did a Nandroid back up. Everything seemed to go well. Then i selected Reboot and now the phone is looping with the White HTC sreen and nothing else....... what should I do to fix it?
angusc said:
Help!
I just went in to recovery mode with CWM and did a Nandroid back up. Everything seemed to go well. Then i selected Reboot and now the phone is looping with the White HTC sreen and nothing else....... what should I do to fix it?
Click to expand...
Click to collapse
It's a known issue with Clockworkmod. Go back into Clockworkmod once again and restore the backup you just made. All will be well.
castro145 said:
This is what I did them I got a new card, I had this in another post so just cut and pasted, my solution to moving to a new card. Bering a new member I can't post the link in here, but here is the copy of it here.
My setup, 2GB no class listed MicroSD, HTC Desire, Rooted with MoDaCo r9, with A2SD. All of my apps are on the MicroSD pretty much.
Well the MicroSD came in and I did what I know how to do, I used a cloning program that I use all the time for PCs, figured what the hell it should work.
- I plugged both of the MicoSDs using the SD adapter, then plugged the SD adapter into an SD to USB adapter and plugged them into the PC.
- I used Acronis True Image 2010 Acronis True Image , did an exact clone (called "Disk Clone" in the Acronis software), from my 2GB MicroSD to the 16GB MicroSD. Did NOT adjust any partitions or anything, had 14GB of free unused, unpartitioned space on the new card.
- Then I took the new 16GB MicroSD and plugged it back into my phone, booted, and it worked great, the phone can't even tell that it's a new MicroSD, shows same sizes and everything, as I didn't adjust any partition sizes yet.
- Then I took the MicroSD back out, plugged it back into the PC, then used another product of Acronis, called Disk Director Disk Director and then went in and expanded/resized the FAT partition to the full size, it used the free unused space to do that, and moved the partitions down the line and expands the FAT one in place.
- Plugged the card back into my phone, booted, worked great, got 15 GB plus of space now on the FAT partition. All the apps works, everything works great. It seems a little snappier and faster when loading apps now.
Side notes:
I just happened to have both of these products installed on my PC and use them all the time so that's what I used, but any Disk Cloning program that supports USB will work.
There is plenty of other "cloning" programs out there, like Norton Ghost - not free, some other pais ones. But also bunch free ones as well a list of them here , wiki list of them as well. Some of these programs are LiveCDs, which means you boot your PC of a CD and then you can edit HDs, also the USB Drives, other like Acronis will have a PC program as well a boot disk. With acorns I was able to use it just as a program no booting of a CD.
I personally have used this program called "hdclone" which is free, it has one limitations but it really is not a big deal in this case, it limits the copying to 1 GB per minute, hell for 16GB card thats 16 minutes !!! so not a limitation really. So do a exact clone using HDclone, don't resize the new SD just leave it as is, this worked for me, I think leaves everything exact as possible. Another free cloning program I have used in the past is DriveImage XML , so either of these will work to clone one SD to another. Now to resize, the product I use ALL the time to resize drives is "gparted", this one is a boot CD, so all you gotta do, plug in your SD card using the USB, boot of this small GParted CD, select your drive and then expand the FAT partition. Few extra steps with some free products but it works if you're not able to acquire Acronis.
Hope this helps, let me know if you have any questions or problems. Sorry for the long write up but haven't seen anybody describe doing this plus some people aren't as familiar with cloning HDs as others.
Click to expand...
Click to collapse
what can i say? very detailed!
the only problem is that, I had to download Acronis product demos before I can do all these. I do imaging before but I dont resize EXT partitions...
ANyway Im still downloading..
Although I think it would help if anybody can post free and lighter (below 50MB, I guess) of softwares that can do USB cloning (disk cloning in general),..
I will post here my results..
HDclone is pretty small program and it should do the job.
Lennyuk said:
if you want to save your ext as well, then this is best done via amon-ra recovery.
do a nandroid + ext backup of your rom with your old sd card.
put in a new sd card, formatted with ext, restore nandroid + ext then your rom and ext will be fine.
As for the fat you will have to copy as outlined above (via a pc).
Click to expand...
Click to collapse
So far, this worked for me.
1. Backed-up my old 8GB card on my PC (the FAT partition).
2. Did Nandroid + Titanium Back up. (The Nandroid will backup the EXT partition)
3. Formatted the new 16GB with FAT32 on my PC
4. Resized the 15.++ GB of FAT32 to 14.XX GB so that the 1GB goes to the EXT3- I did this via a bootable GPARTED CD I got here: http://gparted.sourceforge.net/download.php
5. Copied the Clockwork MOD folder from my PC backup (see step 1) to my new 16GB card.
6. Inserted the new 16GB to my phone and booted into ClockworkMOD recovery
7. Did a NANDROID Restore.
8. After restore, I had to shut off my mobile and I removed the card coz I needed to copy back the whole FAT partition backup from step 1 to the new card.
9. Placed the new 16GB back and voila!
(NOTE: steps can be interchanged,for example, I think the copying of the FAT partition done in step 8 can be done after step 3 above.
Anyways, hope it helped.
!PANDA said:
connect the phone in "Disc Mode" copy all your data onto your computer, disconnect, change memory card to the new one, and copy and paste to the 16 gig.
Sorry I don't know any way of moving you games or apps when changing an SD card
hope this helps! good luck!
Click to expand...
Click to collapse
please bear with me, i am a newbie, have this unrooted desire froyo. i still have no plans of rooting it.
i also wanted to change the 2gig memory card to an 8 gig mem card. can i just follow the instructions above? is rooting really required for this?
thank you in advance for any help or step by step procedure.
Don't worry, you don't need root and it's really simple as copy and paste.
@3722 Huh?.. how can he carry out the above procedure without being rooted?
Sent from my HTC Desire using eMIUI
My reply is to the comment above my post (by nytevs), and he is using a standard froyo A2SD, no root, no ext partitions so it's just simple as copy/paste, just like it says on the quote that he is reffering to in his post (the quote from !PANDA).
3722 said:
My reply is to the comment above my post (by nytevs), and he is using a standard froyo A2SD, no root, no ext partitions so it's just simple as copy/paste, just like it says on the quote that he is reffering to in his post (the quote from !PANDA).
Click to expand...
Click to collapse
Oh i see....
Thanks for the reply
Hey guys I just wanted to ask u all a question bout upgrading sd cards on the Evo. I just purchased a Lexar 32gb class 10 sd card from Amazon. I still hav the stock 8gb card that has all my data....music,movies,music videos,custom roms,kernals amd so on. I hav heard that some people are having problems with changing their cards. So my question is what is the proper procedure to getting this transfer to be successful. Is it better to format new card thru windows or phone? Do I need to partition the new card? What is the easiest procedure to transfer my 8GB card stuff to my new 32gb card. The reason Im asking is I dont want to corrupt the new card in anyway...as u all kno they are NOT CHEAP!!! I just want the transition to workout smoothly with NO problems. Any advice wud b much appreciated. Thanks Yall!!! Evo runnin MikFroyo v4.61 w/ netarchy-toastmod-4.3.4-cfs-havs-more-nososbc...overclocked to 1152mhz.
Copy the contents of your current card onto your computer or an external drive. Shutdown your device. Remove your current card and replace it with your new card. Make sure your device supports the 32 GB size. Reboot your device. Many cards already come formatted, however, it wont hurt to reformat it to be sure. When your phone finish booting up, go to the SD card and phone storage setting within the menu. Select unmount SD card. After it unmounts, the option to format it will appear. Select format. When finished, select mount. Back out of that menu back to your homescreen. Connect your device via USB to your computer or external drive and transfer the items you copied to your newly formatted card. Reboot your device when you're finished. You can also format from your computer and from within recovery. Take your pick.
posting & replying via the XDA Premium app.
If am not wrong EVO supports max 16 GB and EVO Shift is 32 GB
^You're mistaken, the EVO does support the 32gb.
Says so on the HTC support page for EVO
Whew, you had me scared for a moment... I just ordered the same 32 gb microSD this morning. :]
I've been through 2 lexar 32gb cards. Within a matter of weeks to days, I was getting data corruption. Not sure if it's limited to the lexar class 10 cards, or any class 10. It would appear to function fine at first. At some point during the day i'd go to check my email and get a sd card mounted in read only mode message on the status bar. Rebooting would usually not help. Had to hook up the phone to the pc, mount the sd in recovery, then run a chkdsk. I'd typically get many many corrupted files.
Now mind you, i'm always careful to shutdown properly, only mount the sd when recovery. I've come to the conclusion that there is some incompatibility issue either due to the size, or perhaps lexar's ability to be downward compatible with the slower speed devices (I think the evo can only take advantage of up to class 6 devices).
Lets hope you have better luck than I did, but after multiple corrupted files, I'm back with the stock card, which has caused no issues at all (besides being low on space).
i have 32g patriot class 10 card and it works great for me. i just transfered my old sd card stuff onto my computer via the card adapter it came with. i inserted and formatted my new card into my phone. and transfered everything from my computer tomy phone via usb.
Ditto on the formatting with the phone. Since i am using ext, it had to be via the phone as I don't have the right tools to do it in windows.
FWIW, with the initial lexar card, there were no problems for nearly 3 weeks. With the replacement card they sent me, issues started showing up 2 days later. Could be my phone is less tolerant of media quality than others..
one thing you need to remember when copying the files, is to hit the option to see the the hidden files on your sd card, if you dont your phone will have glitches because it will be missing those files, because when they are hidden they dont get copied
Hate to hijack here but it's along the same lines.
If I don't listen to music or take a bunch of pictures what if any difference will I notice upgrading my class? Sorry I am coming from a Vibrant that had 14gigs internal and the sc card was purely optional.
I was thinking about just getting an 8 gig class 10 if it would make a difference.
pc to dupe sd card?
Could you just copy the sd card using an adaptor to your pc hard drive, then copy the files onto the larger sd card, again using the adapter in the pc. then install the new sd card into the phone? I am new, to this, i'm just askin.
blairan...I think you wud b safe to do that but u must format the new sd card first via phone(itself) or thru windows before any transfer of data is made. My question was simply that I hav read that many people hav had complaints bout corrupted files being present thru their new cards. Or problems with "read only" errors and not being able to access things on the card. If u are rooted and are running a custom ROM that allows Apps2sd to help free up internal memory on ur phone then u wud also need to partition the card as well to allow that. I just dont understand why their have been so many people having these problems with the 32g class 10 cards.
blairan...Im pretty sure u wud be safe to do that but if it is a new card u must make sure it is formatted first via phone itself or windows before u transfer anything to it. My question was simply I dont understand why so many people have complained bout corrupted files and or read-only errors on the 32g class 10 cards. Problems that seem to arise days or weeks later after installing new cards. I wud really like to get to the bottom of it and find out why.
blizzard1017 said:
Hate to hijack here but it's along the same lines.
If I don't listen to music or take a bunch of pictures what if any difference will I notice upgrading my class? Sorry I am coming from a Vibrant that had 14gigs internal and the sc card was purely optional.
I was thinking about just getting an 8 gig class 10 if it would make a difference.
Click to expand...
Click to collapse
If anything, you'd probably notice quicker loading from apps that you've moved to the SD card. But admittedly, video, music, and photos are the places you'd see the most tangible improvement.
Doug,
I've tried this several times (I think I'm up to double digits, now) on my rooted Evo running the stock ROM. After I transfer all the files and reboot, several apps are not installed and the phone says it has a low amount of space. I've tried restoring a Clockwork Mod backup as well and I get the same thing. I have everything backed up in Astro, but when I try to install the missing apps, the low memory issue prevents them from being installed. Should I remove all my apps and start over? Should I un-root my phone and do a factory reset? I'm so frustrated I'm about to do the latter.
I'm upgrading to a 32GB class 10 card and I just can't figure it out. Any thoughts?
jmattix said:
Doug,
I've tried this several times (I think I'm up to double digits, now) on my rooted Evo running the stock ROM. After I transfer all the files and reboot, several apps are not installed and the phone says it has a low amount of space. I've tried restoring a Clockwork Mod backup as well and I get the same thing. I have everything backed up in Astro, but when I try to install the missing apps, the low memory issue prevents them from being installed. Should I remove all my apps and start over? Should I un-root my phone and do a factory reset? I'm so frustrated I'm about to do the latter.
I'm upgrading to a 32GB class 10 card and I just can't figure it out. Any thoughts?
Click to expand...
Click to collapse
No, you do not need to unroot, but I do recommend you start from scratch. Since you already have the contents of your card backed up to your computer, go into recovery and re-partition and re-format your card. In amon_RA select "partition SD card" from the main menu. You will be prompted to set a size for 3 different things. Insert a zero each time. Doing so will allow you access to your entire card. Afterwards, copy the rom you want to use to the card via the MS-USB or the Mount USB option, if using ClockworkMod and flash it. Your paid apps will be listed in the Market after you've logged in with your credentials. Your unpaid apps will have to be redownloaded and reinstalled unless you have them backed up to Google's servers or backed up with Titanium Backup. Anyway, you will have a clean install of your rom, a clean install of your apps and a freshly formatted and partitioned SD card. If you still get the low memory error afterwards then I am assuming you have too many apps on your internal memory and thus, you will need to move many of them to your SD card to free up your internal memory. There are tutorials available to learn apps2sd. Anyway, I hope this helps you.
posting & replying via the XDA Premium app.
Thanks so much. I'll give it a try.
jmattix said:
Thanks so much. I'll give it a try.
Click to expand...
Click to collapse
You're very welcome. Enjoy the rest of your holiday...
posting & replying via the XDA Premium app.
I'm using an 8GB SD card and want to change it to a 4GB card. I formatted the 4GB card in Fat32. 2,6GB for EXT3 and the rest fat32. I then copied the ext of my old card to the new card.
I made an nandroid backup with the 8GB card inserted. I copied the nandroid backup to the 4GB card afterwards, wanting to restore it then. But when I choose "restore" I get some weird message that ".../dev..." could not be found or isn'tw orking or something like that.
Any idea??
For one thing, I think your Ext partition is way too big. Why do you need 2.6gig?? Most people will recommend 1 - 1.5gig as plenty enough.
If you made your nandroid with the 8gig, copied to entire card to PC and loaded onto the 4gig, it should work. It worked when I went from 8 up to 16gig, so can't see what is going wrong for you.
Maybe try to format your 4, repartition to 1gig Ext and see what happens.
But EXT is where the DATA is stored, isn't it? The apps and music and so on.
What was wrong with the previous thread?
Sent from my HTC Desire using Tapatalk
Sorry, I forgot that I already made a thread here. ;D Do many message boards, you know! ;D
So, can you tell me how I could partition the sd card through the CM7 recovery? It's supposed to work isn't it.
I then copied the ext of my old card to the new card.
I made an nandroid backup with the 8GB card inserted. I copied the nandroid backup to the 4GB card afterwards...
Click to expand...
Click to collapse
you don't need to do a NAND restore!
since you've copied the old ext contents to the new sdcard ext, then you are good to go, just insert the new sdcard in the phone and start it
the ROM itself was not touched ... its on the phone mem, so it still there...
+1 for the note above, 2+ GB is way much , no need for this large partition.
stinger1 said:
you don't need to do a NAND restore!
since you've copied the old ext contents to the new sdcard ext, then you are good to go, just insert the new sdcard in the phone and start it
the ROM itself was not touched ... its on the phone mem, so it still there...
+1 for the note above, 2+ GB is way much , no need for this large partition.
Click to expand...
Click to collapse
That was the very first thing I tried. Not working. Bootloop.
Sephi said:
That was the very first thing I tried. Not working. Bootloop.
Click to expand...
Click to collapse
i am not sure if there is a standard procedure for such action
another 2 guesses
1- is to make sure the new ext partition is the same format as the old (ext3 or ext4)
2- permissions: try to set permissions for the new ext (after you copied it)
maybe the got some limitation and the OS can't read/write/execute some files...
** in such tricky situation, a logcat will be useful so you can find out what is going on, specially for the bootloop issue, since a copy-paste logically should do it.
Hi everybody. I am trying to get my daughters phone set up. She is 20, very busy, and I only get the phone an hour or so at a time which is frustrating. I have modded my own android phones(Note, Infuse,Gnex) so I'm not a beginner, but this captivate glide is acting a little different.
Here is where I am. CWM is installed and a backup of 2.3.6 is done, and a copy saved on my laptop. I have ardatdat's 1.2 version kernel ready to flash for root and to remove the IQcarrier junk. She will probably stay on stock, rooted since she is not into teching her phone but does want to remove ads and maybe tether to a tablet occasionally on ATT without a tethering plan- tit BU and freezing or removing the tethering manager.
I am having trouble getting the phone to recognize an 8 gb sd card. I have repartitioned it so more apps can be moved over(primary fat32 and logical-ext 2) and split the card to 4gb and 4gb.(approx)- even when just left as a one partition card with 8gb fat 32 the phone just won't recognize it. I put the old 2gb card into the phone and that one is recognized but is from a non android phone- an LG xenon.
I want to put the zip files to flash on the external sd card along with a few apk's ti install with the appinstaller. But.. the phone won't see the files. Do I have to use the internal storage?????
Don't have the phone now- it's off to work with her. So I will try later tonite. Any suggestions??
Thanks. Open for any help here. I have never had this much trouble before! Have searched for sideloading apk's, but from what I am finding it has to be rooted first??? I have checked unknown sources for install of 3rd party apps and usb debugging also checked.
I will continue my hunting for info. I'm sure it's just basic stuff I'm just not seeing. Thanks again
Ah. CWM Recovery is not compatible with the external sd card, I believe. It's located under /sdcard/external_sd but the zips are invisible in the recovery. So yes, I think you have to use internal
Aquethys said:
Ah. CWM Recovery is not compatible with the external sd card, I believe. It's located under /sdcard/external_sd but the zips are invisible in the recovery. So yes, I think you have to use internal
Click to expand...
Click to collapse
Thanks for that. Did not read that anywhere! Any idea about apks on the external sd card?
Ive tried that too... The apps are located in the data partition on the kernel so that is already directed to internal... The only things most people put are Media like movies because music players scan the entire /sdcard partition and the /external_sd is in it.
Hope this helped ^o^
Sent from my SAMSUNG-SGH-I927R using xda premium
sashusmom said:
I am having trouble getting the phone to recognize an 8 gb sd card. I have repartitioned it so more apps can be moved over(primary fat32 and logical-ext 2) and split the card to 4gb and 4gb.(approx)- even when just left as a one partition card with 8gb fat 32 the phone just won't recognize it. I put the old 2gb card into the phone and that one is recognized but is from a non android phone- an LG xenon.
Click to expand...
Click to collapse
You may need to format the sd card in the phone itself to get it to show up, some people have had problems with cards formatted in other devices or a pc.
I haven't tried a dual partition card in the Glide, but I came from a Motorola Flipside which had an absolutely tiny amount of space for apps, making link2sd and the second partition virtually mandatory. The Glide, however, has 2gb internal memory for apps, and the ~3.75gb internal memory that's mounted as /sdcard that you can store apps on with the standard Move to SD build into android, so I can't imagine anyone needing more storage than that for standard apps.
You can always points Titanium Backup to /sdcard/external_sd, my backup folder tends to get pretty big since I keep multiple backups. If she's installing a ton of games that have extra downloads to the sdcard though, you can fill up the internal "sd card" pretty quickly, and there's only a couple of ways to deal with that. She can give you the phone after installing those games and downloading the extra data, and you can manually move the data over to the external SD and create symlinks yourself, which can be tedious.
Alternatively, you can modify the vold.fstab to change the mount points, putting the real external sd as /sdcard and the internal storage as /sdcard/external_sd. There's instructions for this here. The vold.fstab method is what I personally use, as I've got a 32gb sd card and far too many games that want to download 500mb+ each.
bakageta said:
You may need to format the sd card in the phone itself to get it to show up, some people have had problems with cards formatted in other devices or a pc.
I haven't tried a dual partition card in the Glide, but I came from a Motorola Flipside which had an absolutely tiny amount of space for apps, making link2sd and the second partition virtually mandatory. The Glide, however, has 2gb internal memory for apps, and the ~3.75gb internal memory that's mounted as /sdcard that you can store apps on with the standard Move to SD build into android, so I can't imagine anyone needing more storage than that for standard apps.
You can always points Titanium Backup to /sdcard/external_sd, my backup folder tends to get pretty big since I keep multiple backups. If she's installing a ton of games that have extra downloads to the sdcard though, you can fill up the internal "sd card" pretty quickly, and there's only a couple of ways to deal with that. She can give you the phone after installing those games and downloading the extra data, and you can manually move the data over to the external SD and create symlinks yourself, which can be tedious.
Alternatively, you can modify the vold.fstab to change the mount points, putting the real external sd as /sdcard and the internal storage as /sdcard/external_sd. There's instructions for this here. The vold.fstab method is what I personally use, as I've got a 32gb sd card and far too many games that want to download 500mb+ each.
Click to expand...
Click to collapse
Hi and thanks. I just read about that mod. Is it as straightforward as just rewriting that file in rootexplorer? It sounds too easy!
I was gonna format the sd card in the phone but was not sure it would format the internal card and not the external one since I can't seem to get it recognized. I would be in big do do if I erased her stuff!!! It might be a bad card and I'll try an alternate one.
Yep, it's really as easy as snagging the file, editing it, and rewriting it in root explorer (or a shell, I haven't bought root explorer so I tend to do things from the shell). As for formatting in the phone, it should list both an SD card and USB storage, the usb storage is the internal storage, and the sd card is actually the sd card, it *should* have a format option there if the card is good, even if it's not seeing the files on it.
Thank you all!!!!!
bakageta said:
Yep, it's really as easy as snagging the file, editing it, and rewriting it in root explorer (or a shell, I haven't bought root explorer so I tend to do things from the shell). As for formatting in the phone, it should list both an SD card and USB storage, the usb storage is the internal storage, and the sd card is actually the sd card, it *should* have a format option there if the card is good, even if it's not seeing the files on it.
Click to expand...
Click to collapse
Piece of cake!!!!! :highfive: We now have the external sd card (only 8gb for now) mounted instead. Whoever came up with that very clever work around is genius. That's better than apps2sd or link2sd.
Thank you so much to everyone who responded. Between all of you I have Rooted with the kernel on the internal card, and the appinstaller saw the apks when I put them on the internal card. My original 8gb card was bad. It was a cheap one- $5 or $8 dollars. I got 2 and the 2nd one works fine- formatted in my computer and phone saw it immediately. I transferred the stuff from the internal to the external. Did I need to do that? I left it on the internal incase the sd card is removed. Tethering manager is removed- att junk is frozen.
One more question if I may? If another rom is flashed, or I odin back to stock for whatever reason, does this sd card switch stay, or is it overwritten with the new rom? Just need to know what to do if I ever need to reset this phone.
I also added my google account to the market to put my paid apps on her phone but when I signed in to the play store under my account my paid apps did not show as paid. Anyone know why? I worked around it but I was surprised.
Again thanks to such a nice group of people! :highfive: I had a crash course in the captivate glide in 24 hrs. You gave me info here I don't think I could have found with continued searching.
sashusmom said:
I transferred the stuff from the internal to the external. Did I need to do that? I left it on the internal incase the sd card is removed. Tethering manager is removed- att junk is frozen.
One more question if I may? If another rom is flashed, or I odin back to stock for whatever reason, does this sd card switch stay, or is it overwritten with the new rom? Just need to know what to do if I ever need to reset this phone.
Click to expand...
Click to collapse
Moving everything that was on the internal memory to the SD card was a good call, since you swapped the mount points everything that stored stuff on the internal memory will now expect that stuff to be on the sd card. There's no need to keep it on the internal memory (you can delete everything there and it'll recreate LOST.DIR) unless you plan on swapping back at any point, in which case you could just copy stuff across before swapping back.
As for flashing another rom, that'll require you edit the vold.fstab again unless the rom has already made that change, which none of our existing roms have.
Personally, I keep the internal memory completely empty as far as daily use things go. CWR will store its backups there, as it mounts the memory independently of the vold.fstab, and all roms/kernels/etc you want to flash can go there, leaving the sd card free for things you actually use.
Bak- thank you so much for all the info. I saved the original file and I will make a copy of the edited mount file in case I need it again. If I ever get her phone back I will clear the internal card since that info is now on the external one.
I wonder how long this captivate glide will hold up with my daughter. She is very hard on her cell phones. Already case #1 broke due to a drop. 2 more are on the way. When I pointed out it could have been the phone broken she said- yeah, I know. I'll keep the case on. :victoryshe hates cases!) Hopefully this phone will get her thru her senior year in college!
Thank you everyone who pitched in to get me the info I needed to get it going. :laugh:
Figured I'd ask before attempting...
Lots of questions, but who better to ask?
I have a 32gb card in the phone right now, that's storing data, photos, backups, music and tasks plus probably some other stuff that I guess I don't want to lose.
I just purchased a 64gb card that I'd like to install in place of the 32gb card.
I realize I need to Unmount the old card first before removing it, but I'm wondering a few things...
Should I put both cards in my PC and just COPY everything to the new card? Or is there some other way this should be done?
Does the phone format the new card? And if so, won't that erase the stuff I just copied over to it?
Should I let the phone format it first, and then remove it and copy over the stuff from the old card?
I know its probably not the way to do it, but I'm curious...if I were just to install the new card in the phone, what happens to all the apps that stored data on the old card? Will they stop working, or will they just rebuild what they need, onto the new card?
Lastly, I forget as its been a few months since I put the first card into the phone, but...do I need to mount it some way {yes, I realize I"m leaving myself open on that one}
FYI...the phone is rooted, Lokified, Freegee, using Easebackup running stock JB and and I have CWM restore.
On a different note...why do some of the photos I take wind up on internal memory, and other go to the external memory? It seems to do it with the same camera app.
50 views, but no replies! Can't somebody help a brother out?
You need to format the new card to fat32 so it can work across all roms and recoveries.
Sent from my LG-E980 using Tapatalk 4