Related
I got a file and some apps & drivers.
You can find a PDF file in the attachement.
Please read it to see whether it can help.
Apps & Drivers:
http-//rapidshare.com/files/455584224/KinTwoSetupApp.rar
( - should be replaced with : )
Hi guys, here is another USB driver for KIN TWO which is a little bit different to the one uploaded above.
http-//rapidshare.com/files/456921463/KUSBDrivers.rar
( - should be replaced with : )
Thanks to every one here.
Let's work together/
This looks to be exactly what we are looking for. This will definitely open up the possibilities of modifying the current kin os, or porting a new os to the device. However, this guide is useless without the tools and files mentioned in the document. You said you had some files as well, do you have these files?
SPST Vn.n.n.msi.
PB10ZUnPB20ZU (Lab) Vn.n.n.msi.
SPSTUSBDriverInstall.msi.
InstallPMXMTP.msi
With these files we be able to finally successfully hack this phone.
This is great. We have the resources, now we must figure out how to get a modified os on the phone using the tools.
Awesome find KinPhoneLover; not sure how and where you got this SPST, but it could be the very thing that is needed. For people who bricked their kin phones, they should try the "refurbish feature" to see if that will successfully reset their phones back to "factory mode". As for getting a new OS on the phone, in the pdf at the "Upgrade section", when you browse for the firmware file, it is a .ecn file. Not sure how flashing is done for Cyanogen and those other Android custom firmwares, or their file type extensions. If SPST only supports/allows .ecn files, that could be a problem trying to use those Android custom firmwares.
wow, this is exactly what we needed....did this get leeked or something? it says its from the sharp corp., so im guessing they got it somehow by chatting with them? why isnt there a lot of buzz about this??? i can read my phone number and everything off of this...so close to getting android, or just putting java apps on it..
Too bad its only 32 bit But yes. This is one step closer. Please, people with brick kin, test it out. See if we can get the ball rolling again.
Radar2004 said:
Too bad its only 32 bit But yes. This is one step closer. Please, people with brick kin, test it out. See if we can get the ball rolling again.
Click to expand...
Click to collapse
yes, i have to use my slow home computer, instead of using my quad core 64bit laptop
Just got everything up in running. Is anyone else having a problem with the SPST constantly dropping the connection with the phone and reconnecting? I'm not sure if this is due to running XP in a virtual box or if its something I can readily fix.
Short Answer: doesnt work.
Long Story: This needs your phone to be ON even for refurbish option and then, able to connect to a COM port. Unfortunately, that doesnt happen in SBL / APX mode and phone doesnt boot (autoreboots) so no COM mode available.
Just another software installed (for me).
No news in the front, guys. I guess i just need to get rid of verizon software (the one trying to get an OTA), not something from "normal" kin states.
Okay so now that we have a tool to upgrade the software all we need are custom firmware files to flash to it. However I don't see any option to read/dump the firmware using this software.
dezgrz seems to be correct, there don't seem to be a way to read/dump the current OS to make a backup of it. The PRL and ERI options don't seem to be what we want. The Provision option is the only option where we can read stuff from the phone. Could someone run that option, check all those settings (NAM1, security, feature, data, etc) and write it to a file and upload it? Maybe there will be something useful in there.
I gotta order a new battery, then I'll see if I can get anywhere with this... need to load up a 32bit OS first, apparently.
Either way, this is a huge step. Maybe not complete, but still a huge step. Thanks OP.
Hm..??
This seems interesting. I been watching this site until someone "Exploited" the phone. I have a mac, and does this work for kin? What does it do?
zero2duo said:
Could someone run that option, check all those settings (NAM1, security, feature, data, etc) and write it to a file and upload it? Maybe there will be something useful in there.
Click to expand...
Click to collapse
That features seem to be available already with "QPST" software... which didnt make anything advance (yet).
As i said, i renamed my NAM succesfully, and changed some security options (which i guess that doesnt matter, cause i *was* able to work anyway).
not much you can do that you cant do already, besides looking at your phones info. I was able to change voicemail numbers, was *86, i changed it to to just 8, and it says voicemail, but doesnt connect. Still playing around.
Why don't you just take it back to Verizon and get a replacement. How would they ever know you messed it up trying to hack it?
MicroNateDram said:
Why don't you just take it back to Verizon and get a replacement. How would they ever know you messed it up trying to hack it?
Click to expand...
Click to collapse
You should read the whole threads and/or other threads to understand why.
This phone needs to get hacked. I love my phone but i dont like the OS that the phone has. If this phone isnt hacked by the time summer comes, ill be glad to participate. I've hacked many phones but this may be a challenge. I would like to see apps on this phone.
PS I know the phone has java so where can i go to play games or apps for java?
Kinuser1 said:
PS I know the phone has java so where can i go to play games or apps for java?
Click to expand...
Click to collapse
Javascript
johnkussack said:
Javascript
Click to expand...
Click to collapse
Out of all the things I know, why wouldn't I know that its Javascript? Jeeezus. I would happily spend time on this phone but my grades are more important. Now what site could I go to on my phone to play apps/games.
P.S your post didn't really help me.
I accidentally flashed ktoonsez i777 rom on my i747 in a hurry to do so and when it aborted, I realized it was wrong. Not thinking about it, I just restarted from cwm because usually when it aborts, it just reverts. Now my phone does nothing. I was able to aquire the drivers for the mode it is in when it's bricked and it detects it, but odin sees nothing. It says its on COM10 in device manager. I think it was qhusb or something. Anyway, it is not an unknown device anymore and I have read all about this and how everyone does jtag, but is there any software that CAN detect the phone to add any kind of files? I read that somebody was able to find some software to detect it, but this was one person. Any help would be appreciated and I'm sorry for possibly going on a sore topic again, but I REALLY would rather not send this to jtag if I can help it.
Can you get into download mode?
Sent from my SGH-I747 using xda app-developers app
This is his buddy, no he can't. Phone is in some other mode, and unresponsive.
Sent from my Galaxy Nexus using Tapatalk 2
RicoStang said:
I accidentally flashed ktoonsez i777 rom on my i747 in a hurry to do so and when it aborted, I realized it was wrong. Not thinking about it, I just restarted from cwm because usually when it aborts, it just reverts. Now my phone does nothing. I was able to aquire the drivers for the mode it is in when it's bricked and it detects it, but odin sees nothing. It says its on COM10 in device manager. I think it was qhusb or something. Anyway, it is not an unknown device anymore and I have read all about this and how everyone does jtag, but is there any software that CAN detect the phone to add any kind of files? I read that somebody was able to find some software to detect it, but this was one person. Any help would be appreciated and I'm sorry for possibly going on a sore topic again, but I REALLY would rather not send this to jtag if I can help it.
Click to expand...
Click to collapse
Huh? You flashed Ktoonsez's i777 rom? he doesn't have an i777 rom. you mean you flashed his kernel onto this device or what? If you flashed aokp for the i777 then you would be referring to me then. Still unsure what you are talking about flashing so I can't help you out until i know.
NickS_ said:
This is his buddy, no he can't. Phone is in some other mode, and unresponsive.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
What is this other mode? Open task manager and close everything related to Kies before trying Odin.. see if that helps at all
task650 said:
Huh? You flashed Ktoonsez's i777 rom? he doesn't have an i777 rom. you mean you flashed his kernel onto this device or what? If you flashed aokp for the i777 then you would be referring to me then. Still unsure what you are talking about flashing so I can't help you out until i know.
Click to expand...
Click to collapse
I'm apologize. I used to mod the hell out of my old Motorola's before smartphones were mainstream, but I'm new to this again. I flashed his aokp for the i777. I had the 11/4 version for the i747 and I saw that something came out more recently for the aokp so I went to flash that and saw that it was the i777 version when I looked at the file after it aborted and figured I could reboot and it would work. This is when absolutely nothing happened. I accidentally did this same thing with the i747 version on my girlfriends SII and once I saw that it was the wrong version, it just reverted upon reboot which is why I thought it would do the same for me. I know you guys don't make guarantees and it was my fault. I love this aokp and I'll still use it. I'm just a bit upset that I hard bricked because I don't want to have to send my phone out to be jtagged. I can't get it into download mode and I heard on several posts that USB jigs wont work on this phone for forcing it unless the phone isn't bricked (which is kind of useless if you ask me). After this all happened, it came up in windows as QHSUSB_DLOAD as unrecognized. After searching for a while, I found and installed drivers and it now recognizes it, but it wont come up as a device in ODIN. I'm assuming I'm kind of screwed here I'd really appreciate any help or advice other than to return it. I understand I may have to do that, but I'm looking for a solution here. I see that this has happened with a lot of GS3's for various reasons and I'm surprised there isn't a fix yet. Thanks in advance for help.
Update! I'm not sure if this means anything or not, but I have QPST running and the phone is on COM11 and it is detecting it in download mode. Once again, ODIN, will not read this, but QPST is. It is asking me for a phone image to flash in the form of a .hex .hxb .pbn .bin. or .mbn
I can't do much in this software because I'm in QPST download mode, but it looks like it will allow me to flash files with these extensions. Not sure if this matters, but I'd love to find a solution to this bricking issue to save people the money of having to send a phone out or hassle insurance returns and having to run over a poor GS3 with a car to "accidentally break" it. Does anyone have files like this that I can flash?
Alright I got some .mbn files and one .bin using 7zip extracting from a stock rom. On the .bin when I try to flash it, I get "Use the phone's UI to switch it to streaming download mode" and NAK: invalid address when attempting the .mbn flash. I'm getting a bit discouraged again. The only area I can use is "software download" because I can't do anything else with the phone. I'm going to sleep though. Hopefully there will be some insight in the morning. Glad I have developers here!
Follow this thread, though it's mainly about msm8660 for now: http://forum.xda-developers.com/showthread.php?t=1914359
RussianBear said:
Follow this thread, though it's mainly about msm8660 for now: http://forum.xda-developers.com/showthread.php?t=1914359
Click to expand...
Click to collapse
Thanks!
RicoStang said:
I accidentally flashed ktoonsez i777 rom on my i747 in a hurry to do so and when it aborted, I realized it was wrong. Not thinking about it, I just restarted from cwm because usually when it aborts, it just reverts. Now my phone does nothing. I was able to aquire the drivers for the mode it is in when it's bricked and it detects it, but odin sees nothing. It says its on COM10 in device manager. I think it was qhusb or something. Anyway, it is not an unknown device anymore and I have read all about this and how everyone does jtag, but is there any software that CAN detect the phone to add any kind of files? I read that somebody was able to find some software to detect it, but this was one person. Any help would be appreciated and I'm sorry for possibly going on a sore topic again, but I REALLY would rather not send this to jtag if I can help it.
Click to expand...
Click to collapse
When i got hardbricked i sent it to samsung got it fixed completly i obviously had to pay cuz there were scratches on it but u could probably get away with it blaming a samsung software update and get it fixed for free
I like that lol. I didn't even think of that method. I am kicking myself repeatedly for not getting insurance so I could just run over the damn thing!
RicoStang said:
I like that lol. I didn't even think of that method. I am kicking myself repeatedly for not getting insurance so I could just run over the damn thing!
Click to expand...
Click to collapse
That's how I feel right about now haha
RicoStang said:
I accidentally flashed ktoonsez i777 rom on my i747 in a hurry to do so and when it aborted, I realized it was wrong. Not thinking about it, I just restarted from cwm because usually when it aborts, it just reverts. Now my phone does nothing. I was able to aquire the drivers for the mode it is in when it's bricked and it detects it, but odin sees nothing. It says its on COM10 in device manager. I think it was qhusb or something. Anyway, it is not an unknown device anymore and I have read all about this and how everyone does jtag, but is there any software that CAN detect the phone to add any kind of files? I read that somebody was able to find some software to detect it, but this was one person. Any help would be appreciated and I'm sorry for possibly going on a sore topic again, but I REALLY would rather not send this to jtag if I can help it.
Click to expand...
Click to collapse
So, I know this is basically a dead post... but I was wondering if you ever found the solution to this issue? I am experiencing basically the same thing with my i747. Luckily, I purchased a cheap HTC Inspire off of Ebay to use for the time being, but I feel like I am seriously on the brink of figuring this out and its driving me mad. If you did have any luck, I'd love to hear about it!
Ok, I have spent a really long time figuring out where to post this, but I still can't figure it out. Please forgive me if this is the improper place.
Please mind that I have looked at similar hard vs soft brick threads, and tried all of the advice given, but nothing has worked yet.
To start, I have a Samsung Galaxy S II from Sprint. The Epic 4G Touch, Model SPH-D710. I am on a MacBook Pro running 10.7.5 OSX. Recently, I followed the steps as listed by h tt p:// epic4gtouchroot .com /epic-4g-touch-root/ how-to-root-epic-4g-touch-on-mac-or-linux/
The Terminal went through the entire process and said it was successful. I thought 'Wow! That was easy!' However, upon rebooting my phone, it never booted past the splash screen which showed "Samsung Galaxy SII GT-I9100" with a yellow triangle at the bottom. At this point I could access Download mode, Recovery mode, this splash screen, and the charging battery that is shown when it is charging and powered off.
I was so confused so I spent about 3 hours on xda looking for an answer. Next, I downloaded Odin and packaged it for Mac. Then I downloaded the Samsung drivers just in case, and the stock ROM for my particular phone. I went through and tried to use Odin. Much to my dismay, Odin would not recognize my phone at all.
So then, I downloaded a .zip file containing the Official Samsung ROM, and put it on my internal sdcard. Under ClockworkMod, I wiped cache, dalvik cache, and wiped all user data. Then, I applied the .zip file using the option in CWM, and it said that it was successful. However, upon rebooting, it went back to the same screen with the yellow triangle.
Next, I downloaded the CF root, and tried to apply it the same way through CWM. Again a fail. However, now upon rebooting to splash screen, it would progressively turn from a black/gray screen to a white screen. Once it got to the white screen, it stopped and stayed there for about an hour. Then it died.
I tried to boot to Download mode but it says that the battery is too low. So now I am trying to charge it. However, it tries to load the charging battery icon that is normally shown when charging a powered off phone, and flashes to black. From this black screen it again slowly turns gray then white. Once it reaches the white screen, it turns back to the charging icon, and starts the stupid cycle over again. Its been doing that for the past 30 minutes.
UPDATE: My battery is not charging AT ALL. Whether plugged in to computer or wall it continues the cycle.
UPDATE 2: I made a video so that you can see what the phone actually does. I still can't post links, so please remove the spaces. http :// youtu .be /4LW60EknFWw
Remove the battery first, then try charging it. After, get windows onto your Mac or borrow a friend's, and use the windows Odin to get back to stock.
Sent from my SAMSUNG-SGH-I747 using xda premium
christykientzler said:
Ok, I have spent a really long time figuring out where to post this, but I still can't figure it out. Please forgive me if this is the improper place.
Please mind that I have looked at similar hard vs soft brick threads, and tried all of the advice given, but nothing has worked yet.
To start, I have a Samsung Galaxy S II from Sprint. The Epic 4G Touch, Model SPH-D710.
<snip>
Click to expand...
Click to collapse
You're in the wrong forum. This is currently posted in the i9100 forums. You want the Epic 4G Touch forum.
EDIT to add:
To clarify - the Epic 4G Touch is a CDMA phone, and the GT-I9100 is a GSM phone which doesn't even work on Sprint's network.
So according to this:
christykientzler said:
Recently, I followed the steps as listed by http://epic4gtouchroot.com/epic-4g-touch-root/how-to-root-epic-4g-touch-on-mac-or-linux/
The Terminal went through the entire process and said it was successful. I thought 'Wow! That was easy!' However, upon rebooting my phone, it never booted past the splash screen which showed "Samsung Galaxy SII GT-I9100" with a yellow triangle at the bottom. At this point I could access Download mode, Recovery mode, this splash screen, and the charging battery that is shown when it is charging and powered off.
Click to expand...
Click to collapse
You apparently flashed something for the GT-I9100 onto your Epic 4G Touch SPH-D710. If you actually did follow the steps at http://epic4gtouchroot.com/epic-4g-touch-root/how-to-root-epic-4g-touch-on-mac-or-linux/ properly, this should not have happened. What exactly did you download and flash? Because if you followed steps for an Epic 4G Touch, then you would not have downloaded and flashed something that would alter your bootscreen to read GT-I9100.
You MIGHT have been at a recoverable spot at this point, until:
christykientzler said:
So then, I downloaded a .zip file containing the Official Samsung ROM, and put it on my internal sdcard. Under ClockworkMod, I wiped cache, dalvik cache, and wiped all user data. Then, I applied the .zip file using the option in CWM, and it said that it was successful. However, upon rebooting, it went back to the same screen with the yellow triangle.
Next, I downloaded the CF root, and tried to apply it the same way through CWM. Again a fail. However, now upon rebooting to splash screen, it would progressively turn from a black/gray screen to a white screen. Once it got to the white screen, it stopped and stayed there for about an hour. Then it died.
Click to expand...
Click to collapse
By my count, that's you flashing 3 things meant for an GT-I9100 to an SPH-D710.
You're probably out of luck at this point, but again, check in the Epic 4G Touch forum. Maybe someone there can help you, but I wouldn't hold my breath. You might have some luck trying to get a warranty exchange at a Sprint store, if they can't get your phone to boot and see exactly how bad you buggered it. But I wouldn't hold my breath on this, either.
Oh my goodness...
ctomgee said:
You're in the wrong forum. This is currently posted in the i9100 forums. You want the Epic 4G Touch forum.
EDIT to add:
To clarify - the Epic 4G Touch is a CDMA phone, and the GT-I9100 is a GSM phone which doesn't even work on Sprint's network.
So according to this:
You apparently flashed something for the GT-I9100 onto your Epic 4G Touch SPH-D710. If you actually did follow the steps at http://epic4gtouchroot.com/epic-4g-touch-root/how-to-root-epic-4g-touch-on-mac-or-linux/ properly, this should not have happened. What exactly did you download and flash? Because if you followed steps for an Epic 4G Touch, then you would not have downloaded and flashed something that would alter your bootscreen to read GT-I9100.
You MIGHT have been at a recoverable spot at this point, until:
By my count, that's you flashing 3 things meant for an GT-I9100 to an SPH-D710.
You're probably out of luck at this point, but again, check in the Epic 4G Touch forum. Maybe someone there can help you, but I wouldn't hold my breath. You might have some luck trying to get a warranty exchange at a Sprint store, if they can't get your phone to boot and see exactly how bad you buggered it. But I wouldn't hold my breath on this, either.
Click to expand...
Click to collapse
Oh my goodness... I knew I really had screwed the pooch on this one D:
Thanks for letting me know that I really am in a world of trouble. I had thought that GT-I9100 was a type of SPH-D710.
Also I apologize for the incorrect post location. Again, I hadn't understood the difference.
Do you think if I could charge up the battery, and get it into download mode with a jig, I might be able to use OneClick UnBrick? Or some other method?
christykientzler said:
Oh my goodness... I knew I really had screwed the pooch on this one D:
Thanks for letting me know that I really am in a world of trouble. I had thought that GT-I9100 was a type of SPH-D710.
Also I apologize for the incorrect post location. Again, I hadn't understood the difference.
Do you think if I could charge up the battery, and get it into download mode with a jig, I might be able to use OneClick UnBrick? Or some other method?
Click to expand...
Click to collapse
I have no idea. The two phones are different enough that any advice I give you would be invalid.
My suggestion about going to the Epic 4G Touch forum to ask for help there still stands. You're much more likely to find helpful advice and valid files for your particular device there. Do not use any more guides or download any more files from the I9100 forums.
That said, it looks like you may have tried either flashing a GT-I9100 bootloader or .pit file to your phone, which REALLY would have screwed the pooch, yes. If you can't get help in the Epic 4G Touch forums, I'd just take it to a Sprint store and tell them that a Kies update screwed your phone up.
TLDR
There is no such thing as a "Soft" or "Hard" brick, Your device is either bricked or it isnt, simple as that.
If you can get into download or recovery and use them your device is not bricked.
Will do
ctomgee said:
I have no idea. The two phones are different enough that any advice I give you would be invalid.
My suggestion about going to the Epic 4G Touch forum to ask for help there still stands. You're much more likely to find helpful advice and valid files for your particular device there. Do not use any more guides or download any more files from the I9100 forums.
That said, it looks like you may have tried either flashing a GT-I9100 bootloader or .pit file to your phone, which REALLY would have screwed the pooch, yes. If you can't get help in the Epic 4G Touch forums, I'd just take it to a Sprint store and tell them that a Kies update screwed your phone up.
Click to expand...
Click to collapse
Ok :good: Will do. I was wondering what I'd tell them if I went to a Sprint store Thanks again.
TheATHEiST said:
TLDR
There is no such thing as a "Soft" or "Hard" brick, Your device is either bricked or it isnt, simple as that.
If you can get into download or recovery and use them your device is not bricked.
Click to expand...
Click to collapse
Lol?
Softbrick is corrupted system files which result in a bootloop.
Hardbrick is a dead phone that can be fixed with a Jtag or M/B replacement...
Sent from my GT-I9100
Again, there is no such thing as a "soft brick". There is just "bricked" and the term is used too loosely by n00bs.
If you can simply re-flash a rom your device is not bricked at all.
"Soft brick" is just a n00b term that is used because they think their device is bricked if they can't get it to boot.
Your device is only "bricked" if all you can do is JTAG or mobo replace.
Sent from my GT-I9100 using xda premium
ctomgee said:
I have no idea. The two phones are different enough that any advice I give you would be invalid.
My suggestion about going to the Epic 4G Touch forum to ask for help there still stands. You're much more likely to find helpful advice and valid files for your particular device there. Do not use any more guides or download any more files from the I9100 forums.
That said, it looks like you may have tried either flashing a GT-I9100 bootloader or .pit file to your phone, which REALLY would have screwed the pooch, yes. If you can't get help in the Epic 4G Touch forums, I'd just take it to a Sprint store and tell them that a Kies update screwed your phone up.
Click to expand...
Click to collapse
boki9999 said:
Lol?
Softbrick is corrupted system files which result in a bootloop.
Hardbrick is a dead phone that can be fixed with a Jtag or M/B replacement...
Sent from my GT-I9100
Click to expand...
Click to collapse
Is there a one-stop resource for "Jtag or M/B replacement"? I'm having trouble searching forums for some reason, otherwise I would look for it myself.
You need to get it into download mode and then reflash a ROM appropriate for your device. Your phone isn't bricked - but if you fail to get it working again and have to resign to using it purely as a surface to sniff your cocaine off, then you have only yourself to blame.
postfatal said:
You need to get it into download mode and then reflash a ROM appropriate for your device.
Click to expand...
Click to collapse
Thank you, will do.
postfatal said:
Your phone isn't bricked - but if you fail to get it working again and have to resign to using it purely as a surface to sniff your cocaine off, then you have only yourself to blame.
Click to expand...
Click to collapse
LMAO, that's true. I don't blame anyone but myself for my mistakes.
If you hadnt understood the difference then why did you decide one day to go I to your phone and per form operations that are completely unknown to you? Do you ipen up your cars engines and place honda parts into your ford Fiesta?
Sent from my SGH-T889 using Tapatalk 2
Curiousity killed the cat...
ssCISengineer said:
If you hadnt understood the difference then why did you decide one day to go I to your phone and per form operations that are completely unknown to you? Do you ipen up your cars engines and place honda parts into your ford Fiesta?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Because I am curious. This is where it often times gets me, but I like to learn new things by doing. In my eyes it's usually worth the risk. I will admit this was a stupid mistake, but I have certainly learned a lot about rooting in the process
Wow. So, hopefully by now you are in the correct forum. And hopefully have downloaded the appropriate Odin tar file to restore your phone properly. Get that at the dev section of E4GT. Charge that battery in a different phone if you have to. Get into Odin mode and run Odin from a PC (Heimdall for macs?), if the PC does not recognize your phone, its probably the cable. If Odin starts but then fails half way through, its probably the cable. BTW, check out SFHubs Odin-one clicks for your phone, probably the easiest way to restore a clean, new rom.
And in the future, be more curious before you act. Read read read.
Good luck.
Thank you
Dr. Fed said:
Wow. So, hopefully by now you are in the correct forum. And hopefully have downloaded the appropriate Odin tar file to restore your phone properly. Get that at the dev section of E4GT. Charge that battery in a different phone if you have to. Get into Odin mode and run Odin from a PC (Heimdall for macs?), if the PC does not recognize your phone, its probably the cable. If Odin starts but then fails half way through, its probably the cable. BTW, check out SFHubs Odin-one clicks for your phone, probably the easiest way to restore a clean, new rom.
And in the future, be more curious before you act. Read read read.
Good luck.
Click to expand...
Click to collapse
Yes I got to the correct forum.I still don't know which file to download. Nobody has bothered to point me in the right direction. Considering what I did to it last time with what I thought was the correct file, any direction would be appreciated. :/ I'll definitely ask in the E4GT forums. I'm currently working on getting a charged up battery, but I won't be able to do so until next Friday. I've looked into OneClick UnBrick. When I get the charged battery, I will definitely use a more reliable cord. XP I will definitely research more next time. In fact I might not mess with it at all!
Thank you for your help!
christykientzler said:
Yes I got to the correct forum.I still don't know which file to download. Nobody has bothered to point me in the right direction. Considering what I did to it last time with what I thought was the correct file, any direction would be appreciated. :/ I'll definitely ask in the E4GT forums. I'm currently working on getting a charged up battery, but I won't be able to do so until next Friday. I've looked into OneClick UnBrick. When I get the charged battery, I will definitely use a more reliable cord. XP I will definitely research more next time. In fact I might not mess with it at all!
Thank you for your help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1903252
If you can get into Odin mode (on a PC preferably) , download one of these files. I recommend the latest official ICS build. Read the op carefully. That will return you back to stock. All your data is gone,, but hopefully you've always backed up your contacts to Google. The play store will have your app history.
Wait what..?
Dr. Fed said:
http://forum.xda-developers.com/showthread.php?t=1903252
If you can get into Odin mode (on a PC preferably) , download one of these files. I recommend the latest official ICS build. Read the op carefully. That will return you back to stock. All your data is gone,, but hopefully you've always backed up your contacts to Google. The play store will have your app history.
Click to expand...
Click to collapse
I see that the latest is FI27. The three files shown are OneClick.exe, a zip file, and an unrooted TAR file. From those I'm assuming that OneClick.exe is a windows application that goes in and puts your phone back to the ICS build with one click? This method would be the simplest, except for the fact I have a Mac. Would the time taken to repackage it be worth it or would one of the other two options be better? And the zip file. Would I be able to put that on my internal SD card and flash it through CWM? Or would I unzip it and flash through heimdall. As for the TAR file, I am unfamiliar with this, and am not sure how this file would be utilised.
The last time I tried to understand a concept on my own, I ended up with a bricked phone so please forgive me for asking so many questions, I just don't want to mess it up a second time.
As for the data, yes it is gone. DX Yes I backed up contacts *phew*. I had a feeling going into this that I should back up something.
christykientzler said:
I see that the latest is FI27. The three files shown are OneClick.exe, a zip file, and an unrooted TAR file. From those I'm assuming that OneClick.exe is a windows application that goes in and puts your phone back to the ICS build with one click? This method would be the simplest, except for the fact I have a Mac. Would the time taken to repackage it be worth it or would one of the other two options be better? And the zip file. Would I be able to put that on my internal SD card and flash it through CWM? Or would I unzip it and flash through heimdall. As for the TAR file, I am unfamiliar with this, and am not sure how this file would be utilised.
The last time I tried to understand a concept on my own, I ended up with a bricked phone so please forgive me for asking so many questions, I just don't want to mess it up a second time.
As for the data, yes it is gone. DX Yes I backed up contacts *phew*. I had a feeling going into this that I should back up something.
Click to expand...
Click to collapse
The one clicks are full "images" flashed through Odin. I recommend this because a one click will reflash your stock rom, modem, and recovery partition. This is what you need to do to repair your phone. If you try to flash something in recovery, it will repair your rom but not necessarily your modem/radio/firmware, and this could be a problem. I'm not sure exactly what you flashed before, so I think its best if you fix it all with a One Click.
As far as using a Mac goes, I am not sure. I'll look into it, you should too. Odin used to be only for PCs, Heimdall for Macs. Maybe its changed now?
---------- Post added at 08:30 PM ---------- Previous post was at 08:19 PM ----------
You must have some schmo friend that will let you borrow his or her PC laptop for 10 minutes. Install Odin , install the proper drivers. Go into Odin mode, connect phone, once recognized... click.
Look up QBKing77 on YouTube, search on YouTube "QBking77 Epic 4g Touch" and you will see instructional videos with appropriate download links.
Why have you lot continued to answer this thread ? It's in the wrong place. More to the point, why hasn't anyone asked mods to move it to Epic 4G Q&A ? (Which I've just done)
First of all let me say THANKS to all of the dedicated folks on this website that I have found to be most useful while looking for help.
My problem may have been discussed previously, but after doing much browsing I must not be using the right keywords to find a resolution.
I am having issues with a SGH-i747 running stock 4.3 that I just purchased, so I have no clue what may have been done to it in the past.
So as the title says - The green android while booting into recovery mode just falls over with red triangle, and underneath it flashes - No command - Error - No command.
Also if I do try to flash anything - I get several RED errors in a row basically saying - E: No data folder found and a few other things before it quickly reboots and I can't see what the other errors are.
Would appreciate any ideas you folks may have - Thanks.
TWRP had an Odin flashable .tar. If you need recovery you should be able to just use that or terminal command to install.
Odin Fails Too
BCSC said:
TWRP had an Odin flashable .tar. If you need recovery you should be able to just use that or terminal command to install.
Click to expand...
Click to collapse
This is how I discovered the android falling over issue.
While attempting to install clockworkmod.tar through Odin which will PASS
But then when entering recovery mode I get the stock recovery with green android falling over & data errors.
I have performed this same procedure on my other phone which is identical make and model but starting off with stock 4.1.2 without any issues.
I have also tried flashing philz_touch_6.0.7.9-d2att.tar.md5, but that creates a whole new set for errors & fails.
Deeeno said:
This is how I discovered the android falling over issue.
While attempting to install clockworkmod.tar through Odin which will PASS
But then when entering recovery mode I get the stock recovery with green android falling over & data errors.
I have performed this same procedure on my other phone which is identical make and model but starting off with stock 4.1.2 without any issues.
I have also tried flashing philz_touch_6.0.7.9-d2att.tar.md5, but that creates a whole new set for errors & fails.
Click to expand...
Click to collapse
Push it in Terminal Emulator app. Instructions here. http://forum.xda-developers.com/showthread.php?t=2170635&highlight=recovery+terminal. This forces it top the memory block, so should work. I'm asuming the phone boots and you are rooted.
BCSC said:
Push it in Terminal Emulator app. Instructions here. http://forum.xda-developers.com/showthread.php?t=2170635&highlight=recovery+terminal. This forces it top the memory block, so should work. I'm asuming the phone boots and you are rooted.
Click to expand...
Click to collapse
Boots up just fine & Unlocked, but is not rooted yet - This is why I tried getting clockworkmod.TAR & CWM_SuperUser_v3.0.7 (1).zip flashed.
But my main concern is getting the android falling over issue fixed at the moment, and I think the rest will resolve itself once that's accomplished.
I realize I am no rocket scientist with android phones (Galaxy S3), or I wouldn't be looking through these help forums, and asking for advice.
But it seems to me it's like fixing your car - You need to figure out the root cause of the issue rather than putting band aid patches on it.
Seems like the operating system has other issues to deal with other than obtaining root access at the moment, or it wouldn't keep giving me errors stating that it can't access the DATA files.
Maybe my way of thinking is way off base? Thanks for all your input anyways & I will click the THANKS button if it lets me.
Deeeno said:
Boots up just fine & Unlocked, but is not rooted yet - This is why I tried getting clockworkmod.TAR & CWM_SuperUser_v3.0.7 (1).zip flashed.
But my main concern is getting the android falling over issue fixed at the moment, and I think the rest will resolve itself once that's accomplished.
I realize I am no rocket scientist with android phones (Galaxy S3), or I wouldn't be looking through these help forums, and asking for advice.
But it seems to me it's like fixing your car - You need to figure out the root cause of the issue rather than putting band aid patches on it.
Seems like the operating system has other issues to deal with other than obtaining root access at the moment, or it wouldn't keep giving me errors stating that it can't access the DATA files.
Maybe my way of thinking is way off base? Thanks for all your input anyways & I will click the THANKS button if it lets me.
Click to expand...
Click to collapse
I understand exactly what you mean, but root access can be a key to you here. Your recovery is broken or at least something in a system file is harming what recovery is trying to do. Problem is these are not accessible without root. Root is not the band aid, it's the scalpel Try fixing that car without wrenches. The problem with recovery is that it is protected. You could flash a new stock one as part of an official firmware, but if you are stock 4.3 you are going to run into bootloader issues (nevermind the fact that Samsung hasn't released one. This leaves your other fix as replacing your recovery and requires access to the root system files.
++On another note, I just found this and don't want to delete everything I just typed. See this thread here and see if it pertains to you. http://forum.xda-developers.com/showthread.php?t=2520115
Either you or someone else have already installed a custom recovery. Without root access recovery will fail, the android will fall and you will see red. Use this to root and fix your phone...http://forum.xda-developers.com/showthread.php?t=1963790
Good point on having no wrenches to fix the car --- I will head your advise, and move forward with getting it rooted.
BCSC said:
the android will fall and you will see red. Use this to root and fix your phone...http://forum.xda-developers.com/showthread.php?t=1963790
Click to expand...
Click to collapse
You nailed it on the head - I'll be sure to also hit the Thanks tab for chainfire also since he deserves credit also.
CF Auto Root did the trick and the poor little green android no longer falls over.
Moderators can mark this thread as resolved & Thanks again for all your help.
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
HPTesla said:
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
Click to expand...
Click to collapse
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Penley94 said:
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Click to expand...
Click to collapse
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
HPTesla said:
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
Click to expand...
Click to collapse
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Penley94 said:
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Click to expand...
Click to collapse
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
HPTesla said:
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
Click to expand...
Click to collapse
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Penley94 said:
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Click to expand...
Click to collapse
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
HPTesla said:
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
Click to expand...
Click to collapse
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Penley94 said:
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Click to expand...
Click to collapse
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what he said, framaroot was quick and easy for me, but the lgog is so damn picky and fiddy seems to be the preferred method so use it just to be safe. I had zero issues with framaroot but I think I've just been lucky. And definitely update to zvc before doing either. I'd also update prl and profile for good measure.
That sucks that you lost all of your data, they must have actually did a hard reset where as BestBuy told me they did a hard reset and actually did a soft reset. But it's BestBuy so I never expect much. I softbricked my lgog the day after I got it using the GAIO tool(before finding out about FreeGee) and they fixed it with a soft reset. The guy called the manager over and the manager asked me if I tried unlocking the bootloader and I played dumb. My exact words were "What the hell is a bootloader?" and he immediately fixed it. But I was shocked anyone at BestBuy would even know that. Lmao.
As for my EVO, the micro usb port broke so I was charging it for two months like MacGyver, literally stipped the usb charging wire and hooked it straight into the positive/negative terminals in the battery while turned off! It was a fire hazard but it did the trick, lol. And luckily it had external sd(my one big gripe about the lgog) so I could still get my stuff off of it even without usb. I did love that phone, but you're right, it's incredibly slow now compared to the wonderful lgog.
And as always you are quite welcome!
---------- Post added at 07:39 PM ---------- Previous post was at 07:30 PM ----------
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I think the reason I say framaroot is bc its also super easy, install the app, pick gandalf exploit and it will do it's thing - done without ever connecting to a pc. But @engine95 is right, fiddy is more stable so use that. As for TWRP, I love 2.5.0.0 but for KK roms you have to use the one that comes with updated FreeGee, TWRP 2.6.3.x because of the SELinux changes Google made with 4.4. TWRP 2.6 was unstable originally but has since become just as stable as 2.5 according to most. OpTimuS DE was rock solid for me, as for getting some of the G2 apps, I'm not certain. It's doable but I don't know how difficult it would be because I've never tried to install them elsewhere. And I already gave you my choice of best current KK roms but today I found out a few guys are trying to get OMNI official for us. When that happens I think I will be switching to OMNI because they have been producing some impressive commits/tweaks that you won't find elsewhere. Just look through xda news to see what I mean, OMNI is on a roll!
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Again, I think you're right on all fronts. Liquid was smooth(heh) but it hasn't been long since we received an official 4.3 so I don't think they're up to 4.4. And same goes for the G2 apps, sometimes it's as simple as pulling an apk out of a zip and pushing it to system/apps and changing permissions but I think Lrod did a lot of work to get the G2 apps working on our phone because they required certain dependencies/modified frameworks.
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Penley94 said:
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Click to expand...
Click to collapse
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
engine95 said:
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
Click to expand...
Click to collapse
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Penley94 said:
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Click to expand...
Click to collapse
AOSP SuperNexus has been getting good reviews here in the forums but I haven't tried it yet. I would give that one a shot though. I'd flash GAPPS standard with it instead of GAPPS core as well. This is just generally speaking with any of the AOSP roms.
The directions @engine95 gave you for fiddy are spot on(as usual ), specifically having the phone in charge only mode instead of mtp. I think a lot of people have missed that step and it won't work in mtp. Using usb 2.0 is another good tip.
And if your phone didn't reboot, you probably arent rooted. Easiest way to check that you are rooted is by going into the app drawer and seeing either Superuser or SuperSu app. If it's there, you're rooted, if not, it didnt work. If it said it worked but didnt reboot, Im assuming you rebooted manually? It sounds silly but sometimes it's as simple as that. But again, after rebooting if one of those apps arent there, you are not rooted.
EDIT: I've never tried rooting with fiddy without being in charge only mode, Im wondering if being in mtp may install supersu/superuser app but not the binary? Probably not but I could be wrong. Just wondering if there is any possible way that the app could be there but you still wouldn't have root privileges. For me, if the app is there, I'm rooted but I don't pretend to know everything(far from it, lol).
EDIT#2: Once you are rooted and recovery is installed, here is the link to SuperNexus.
EDIT#3: And I can't stress this one enough....after rooting and unlocking the bootloader, before flashing ANYTHING, make a full backup of your stock AND copy the TWRP folder(with your backup in it) to a computer, JUST IN CASE! That way you will always have a backup elsewhere, even if something goes wrong with your phone's internal storage. Better safe than sorry!!! And it's also best to copy the entire TWRP folder.
@HPTesla You're on a roll!
Go with everything he's said.
I don't use Google music ,so I'm of little help there.
Almost every ROM has its quirks, and it's just a matter of finding the one that does what you need/want.
Our devs have given us a lot of options. And I know, I sure appreciate them.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
I ran OpTiMuS for a long time and every time I would try new roms, decide I didn't like or whatever and go back, I'd always have to 1. Dial ##72786# 2. Let it self activate sometimes twice, but usually just once before I would pick up 3g/4g. May have just been my phone but you may try that out if you go back to optimus De. Over all, my favorite stock like rom though.
Sent from my Optimus G using XDA Premium 4 mobile app