Develop Bugs

Failed to boot into recovery

I succesfully installed the Rcmix hd v6.0.0.1 but now I cant get into recovery. I get a white HTC screen when I try enter it. Anything else works fine :S

Download ROM Manager from the market, and reflash it from there.

i tried it but no, i reverted it back to .5 and it works now but idk

Press vol-down and power. Keep them pressed until eng hboot prompts in. Select "boot recovery"

alienmind said:
Press vol-down and power. Keep them pressed until eng hboot prompts in. Select "boot recovery"
Click to expand...
Click to collapse
You shouldn't need to keep them pressed. For me I just hold vol- and as soon as I've pressed the power button (and it's obvious it is powering on - normally instant) I let go.
Just as a by-the-by comment, being someone that looks at a lot of posts I see more issues with RCMix ROM than any other especially about recovery or flashing (even taking into account the popularity or it).

CWM after Unrevoked?

I rooted my phone using unrevoked 3.1. I can't seem to access CWM to install CM9...
During the install, I just left it as "Clockworkmod Recovery"
Did I miss something?

What happens when you try to enter recovery through hboot?

nschiwy said:
What happens when you try to enter recovery through hboot?
Click to expand...
Click to collapse
So that's what I was missing... for some reason I though CWM started when you held power + vol down. I see it when I choose recovery. Thanks!

No Problem, glad I could help!

Ok another question... I'm wiping through CWM... how long does it take and how do I know it's working? It's just sitting on the logo.

you need to use the optical joystick or trackpad or whatever you want to call it down at the bottom of your phone. volume up/down can be used for navigation but enter is center press on that bottom button
EDIT: sorry, I wasn't very clear. the phone isn't freezing, the power button doesn't do anything in CMW on the dinc. If you click it again it will bring back the menu and you need to use the OJ to navigate and select to wipe system, data, data/data, cache, and dalvik cache. the first 3 of which can be done by selecting "factory reset" within CWM

I just want to add, the Power button does nothing but show the logo when you're on the main screen. The Power button serves as the back button once you've selected options using the optical button.

SlimSnoopOS said:
I just want to add, the Power button does nothing but show the logo when you're on the main screen. The Power button serves as the back button once you've selected options using the optical button.
Click to expand...
Click to collapse
True! I forgot about that, I always use the regular back button on the soft keys because i'm used to that but it's still good to know.

[Q] How to get out of stock Android system recovery (power button won't select)

Okay here's the run down. I'm on JB and rooted, and was about to apply the new FreeGee bootloader unlock, when I wanted, out of sheer curiosity, to check to see if I could get into the stock recovery by holding powering off and then holding Vol Down + Power. Ever since I rooted it didn't seem to work anymore, but I didn't have a need to boot into since manually applying the JB update.
Anyway, neither Vol Down+Power of Vol Up+Power worked, the phone just booted normally. So, I decided to use ADB to boot into recovery using "adb reboot recovery". It worked, and the stock recovery loaded up. I can scroll up and down using the volume keys, but for some reason cannot select any option by pressing the power button. If I hold the power button down, the phone will appear to restart, but it boots right back into the stock Android system recovery, where again, I cannot simply select any choice with the power button. ADB doesn't list the device since I'm in recovery, and I only have fastboot installed on my lapton running XP which isn't available at the moment (I'm on OSX 10.6).
I'm thinking pulling the battery may work, but I don't have my torx screw driver handy. Anyone have any ideas? Perhaps where to get fastboot for OSX (it appears to still be missing from Android SDK). Thanks.
EDIT: SOLVED - Turns out in stock recovery, the soft menu button (the one on the bottom right) is used to make the selection, not the power button like in the custom recoveries. Still not sure why the Power+Vol. Down doesn't work to boot into the stock system recovery.

Use the menu button to select now.

what dm said. they wont be lit up but they still work

Yeah, I figured that out almost immediately after posting this (feel dumb now). Thanks though.
Any idea why the key combo Vol. Down + Power no longer works to boot into stock recovery? Seems odd that it worked before when manually updating to JB.

Hello. Can you tell me another solution. I have similar problem. Stuck in recovery mode with faulty power button, and can't get out of there. It's not working with menu button. Is there a way to do it with SD memory card? Thanks.

Tried flashing Viper and now can't get to fastboot menu!

I tried flashing ViperOneM8 1.8.0 (ViperOneM8 1.7.1 -> 1.8.0) which I guess was the wrong thing (I think that was an update, should have started with 1.7.1 first). Anyway... Now my M8 boots to some type of android base OS without a lot of things...
1) It's not possible to get to settings as there is no settings app in the app drawer.
2) There is no title bar/task bar at the top. The area that holds the time, and a few icons at the top is gone.
3) There is no background.
4) There is no way to get on the WiFi do to #1 and because of this I can not add my google account. That in turn means no google play store access.
But the BIGGEST thing of all... I CAN NOT BOOT TO FASTBOOT!!!
- Power the device off.
- Hold the volume down button (also tried the volume up button) + press power usually boots strait to fastboot mode.
I THINK it has something to do with the fact that by default in the settings I need to untick the fastboot option in the dev options.. Well I can't get to settings. Now what?

arvo.bowen said:
I tried flashing ViperOneM8 1.8.0 (ViperOneM8 1.7.1 -> 1.8.0) which I guess was the wrong thing (I think that was an update, should have started with 1.7.1 first). Anyway... Now my M8 boots to some type of android base OS without a lot of things...
1) It's not possible to get to settings as there is no settings app in the app drawer.
2) There is no title bar/task bar at the top. The area that holds the time, and a few icons at the top is gone.
3) There is no background.
4) There is no way to get on the WiFi do to #1 and because of this I can not add my google account. That in turn means no google play store access.
But the BIGGEST thing of all... I CAN NOT BOOT TO FASTBOOT!!!
- Power the device off.
- Hold the volume down button (also tried the volume up button) + press power usually boots strait to fastboot mode.
I THINK it has something to do with the fact that by default in the settings I need to untick the fastboot option in the dev options.. Well I can't get to settings. Now what?
Click to expand...
Click to collapse
Shut down phone.
Turn it on
Hold volume up+power button until it restarts
As soon as you get the black screen for restart release power button and hold volume down.
If your timing is right you will enter bootloader.
I tried it and it definitely works
Flash your nandroid or any rom you know was ok to begin with and you are up and running!!!

stathis95194 said:
Shut down phone.
Turn it on
Hold volume up+power button until it restarts
As soon as you get the black screen for restart release power button and hold volume down.
If your timing is right you will enter bootloader.
I tried it and it definitely works
Flash your nandroid or any rom you know was ok to begin with and you are up and running!!!
Click to expand...
Click to collapse
Tried that...
1) Powered off device.
2) Held power button for about 2 seconds until it came on then let go.
3) IMMEDIATELY I pressed and held down the power and volume up buttons.
4) The phone continues to boot up a little bit longer and gets to the verizon check (verizon splash screen) then shortly after goes black (as expected).
5) IMMEDIATELY let go of power button continuing to hold volume up button.
... .. .. .
6) I get the white screen that says HTC (powered by android)... NOT a bootloader screen as expected.

Update... When I try to click on the app drawer then top right click the little three dots, I try and "Manage Apps" ... ERROR "App isn't installed"...
:/

arvo.bowen said:
Update... When I try to click on the app drawer then top right click the little three dots, I try and "Manage Apps" ... ERROR "App isn't installed"...
:/
Click to expand...
Click to collapse
If you connect the phone to the computer, can you get fastboot or adb to recognize the phone?
If so, you can try adb reboot bootloader command or fastboot reboot bootloader comand

arvo.bowen said:
Tried that...
1) Powered off device.
2) Held power button for about 2 seconds until it came on then let go.
3) IMMEDIATELY I pressed and held down the power and volume up buttons.
4) The phone continues to boot up a little bit longer and gets to the verizon check (verizon splash screen) then shortly after goes black (as expected).
5) IMMEDIATELY let go of power button continuing to hold volume up button.
... .. .. .
6) I get the white screen that says HTC (powered by android)... NOT a bootloader screen as expected.
Click to expand...
Click to collapse
After 4 you release power button and press volume DOWN.
This will get you to the bootloader

stathis95194 said:
After 4 you release power button and press volume DOWN.
This will get you to the bootloader
Click to expand...
Click to collapse
Yea, I ended up doing the following...
1) While device is powered on, Press and hold Volume Up + Power until device reboots.
2) When it starts to reboot continue holding the Power button and change to the Volume Down.
That worked for me.

How to reliably start TWRP

I have TWRP installed, and have managed to run it a few times. Now I cannot start TWRP at all.
From off, if I switch on, the following happens:
1) Screen with Samsung Galaxy A70 - Secured by Knox
2) 0.5 seconds later another screen, "this phone's bootloader is unlocked and it software integrity. .." and "press power key to continue..."
3) 5 seconds later, same screen as (1)
4) 3 seconds later, red letters "this phone is not running Samsung's official software"
5) 3 seconds later blank screen with "samsung" and then booting to android.

In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.

mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it )
Click to expand...
Click to collapse
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
mobin22 said:
and then press power down button
Click to expand...
Click to collapse
Do you mean volume down?

Zilliman said:
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
Do you mean volume down?
Click to expand...
Click to collapse
Power off the device, plug into a pc, wait for it to start charge, hold vol up and power till it turns on. Wala boots to twrp. If you have magisk installed,you can use the reboot option within magisk.

mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
Click to expand...
Click to collapse
Samsung changed how to enter recovery on Android 11. Power off device, plug into pc, wait for it to charge, then hold vol up and power till it turns on. Alternatively, if you have magisk installed, use the reboot options within magisk.

I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.

Zilliman said:
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Click to expand...
Click to collapse
That's because you're not installing it properly go back to my guide and follow it exactly and stop listening to these other people. I've been modding this device since it first came out with Android 9, I know every inch of this device. You're getting confused by what other people are telling you

MarvinMod said:
5- Press and hold vol down and power till the screen turns blank then immediately press and hold vol up. The device will reboot then land you in the twrp splash screen
Click to expand...
Click to collapse
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.

Zilliman said:
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Click to expand...
Click to collapse
After successful flash of recovery.tar, power and vol down to reboot, as soon as the phone screen goes blank, immediately release all keys and press and hold vol up. Must be as soon as screen goes blank. The device will then reboot twice and land you in twrp splash screen. You must hit vol down and power after successful flash then when screen blanks, vol up. If you miss this step, twrp will not hold and revert back to stock recovery.

Here is the notes I made today:
****************************************************************
INSTALL + START TWRP
phone is off
press up + dn
insert cable
go into download (press up)
ODIN 3.14 + AP:tar(vbmeta.img+twrp.img), auto reboot off, press upload
when it succeeds, press dn + pwr until it reboots
then quickly up + pwr until it starts (no need to hold down)
this starts in TWRP
from powered off
press pwr button
goes into twrp or android(system) -- depending on what was used last time
if we used reboot->system last time it will now **Always** go into system!
to go back into twrp:
switch off
power cable until charge
pwr + up until it starts
****************************************************************
The above means that you CANNOT go back to TWRP unless you have a cable and a PC near by.