Develop Bugs

tun.ko for kernel 2.6.29-36d5cb8d (Stock 2.1 firmware)

Hi everyone!
Just wanted to ask if anyone could upload their tun.ko for the said kernel. I'm trying OpenVPN and it is one of the requirement for the program to run.
Thanks a lot in advance!

blue_algae said:
Hi everyone!
Just wanted to ask if anyone could upload their tun.ko for the said kernel. I'm trying OpenVPN and it is one of the requirement for the program to run.
Thanks a lot in advance!
Click to expand...
Click to collapse
You can't build a loadable kernel module without recompiling the kernel, hence theoretically you must also change the kernel....
I think that the stock kernel has this model built inside the kernel, so you should be able to just run OpenVPN and it should work, no need to load anything.
If this still does not work for you, look at the FlyKernel from my signature, it should solve the problem for you (if you try it and there are problems let me know on it's thread).

Thanks for the reply! I cant find tun.ko anywhere so I guess it is missing from the official rom. Im getting tired of the stock rom anyway so maybe its time to load up some custom prepared eclair or froyo.;-) i'll try cronos droid as im curious of what divx library is for. Maybe it can paly divx natively? Anyway, thanks again!

blue_algae said:
Thanks for the reply! I cant find tun.ko anywhere so I guess it is missing from the official rom. Im getting tired of the stock rom anyway so maybe its time to load up some custom prepared eclair or froyo.;-) i'll try cronos droid as im curious of what divx library is for. Maybe it can paly divx natively? Anyway, thanks again!
Click to expand...
Click to collapse
I'll try to clarify what I tried to say above: To the best of my knowledge there is no tun.ko in the official ROM. This is the way it should be. And yet openVPN will still work for you. Did you try to use OpenVPN and have some problem with it?

hey, thanks for taking time helping me out.
I was able to install openvpn. I can enable openvpn too, however, may problem is I can't use my openvpn configuration. For some reason, I can't make my openvpn configuration enabled. No error whatsoever. When I click the check mark for the configuration, it just blinks. Here's my hunch, In the tun module settings, there is this option: "path to tun module" which I dont know where to point to since the stock kernel does not have tun.ko. I downloaded a couple of tun.ko that I saw here and a couple of others I found using google. But since these are all not for the kernel that I have, it all didn't work. what do you think should I do?

blue_algae said:
hey, thanks for taking time helping me out.
I was able to install openvpn. I can enable openvpn too, however, may problem is I can't use my openvpn configuration. For some reason, I can't make my openvpn configuration enabled. No error whatsoever. When I click the check mark for the configuration, it just blinks. Here's my hunch, In the tun module settings, there is this option: "path to tun module" which I dont know where to point to since the stock kernel does not have tun.ko. I downloaded a couple of tun.ko that I saw here and a couple of others I found using google. But since these are all not for the kernel that I have, it all didn't work. what do you think should I do?
Click to expand...
Click to collapse
Ok, I was sure for some reason that openVPN should work well with the stock kernel (personally I don't use VPN so can't really check it myself).
I think your best bet now is to try a different kernel. You can try my kernel from my signature (flykernel) which should work on almost any ROM. Or if you where planning to checkout different ROMs, go for it and hopefully it will work for there.

just finished reading your kernel details and it sounds interesting! I'll give it a try now.
and yea, thanks for the help and for your kernel.

Scoot CyanogenMod 7.1.0 RLS3 (Gingerbread 2.3.5) [07/08/11]

Scoot CyanogenMod 7.1.0 RLS3
This is a build I have compiled from the official CyanogenMod source files and adapted for Kaiser/Vogue. Feel free to give it a go at your own risk!
Well, it still isn't quite as snappy as Froyo and the camera still doesn't work properly but it's probably about as fast as Gingerbread will get on our devices. I'm bound to have messed a few things up but i'll continue to work on it when I get time
All the usual things are working as far as i know, GPS works fine for me but the camera is as always not fully functional.
All of this is thanks to the guys working on the CyanogenMod roms and of course, none of this would work without all the hard work on the kernel so big thanks to dzo, vilord, l1q1d etc...
-------------------------------------------------------------------------------------
RLS 1:
Initial Release
Includes most of the Google Apps including Maps, Gmail etc..
Latest Market is included
RLS2:
Built from the latest 7.0.2 source
Optimised EGL for our devices
Updated Market
LDPI and PNG optimisations to save space & increase speed
ADW Launcher updated
Loads of tweaks and status bar changes
Updated RIL lib
Loads of fixes and optimisations
**I recommend leaving the phone for 5 minutes after installing to sort itself out and cache apps etc...**
RLS3:
I can't really be bothered to list all of the changes, there are quite a few but I just compile the thing, the changes are in the CyanogenMod repository. I have included the updated RIL and all of the Google Apps are up to date. The camera is still ****e but that's a driver issue. This release hasn't been heavily tested as I don't use my Kaiser as a main phone anymore So i'm sure you will find issues in which case we can sort them out as and when. Enjoy!
LINKS:
RLS1:
English: http://www.mediafire.com/?6708ud8kc9l9ex5
All Languages: http://www.mediafire.com/?amhd996w81xfldp
RLS2:
English: http://www.mediafire.com/?yhsc6jyl47wgpkv
All Languages: http://www.mediafire.com/?v3hhbh5tufoedfp
RLS3:
English: http://www.mediafire.com/?76vn9k0cx3debzd
All Languages: Coming soon!
Google Apps
28.04.11 : http://www.mediafire.com/?4yc9ubn2m513k3q
07.08.11 : http://www.mediafire.com/?c86rpae5kopdicc
I think that's it for now, have fun

OOOOOyyyyéééééé OOOOoyyyyyéééé !!!!
download'n !!!
thinx scooter & all android developers for our old kaiser
'll try your build this night & report any bugs...
keep working i realy apreciate your work sccooouut
xcuse my stupide bad english
cordialement esolks.

scooter1556 said:
Scoot CyanogenMod 7 alpha RLS1
This is a build i have compiled from the official CyanogenMod source files and adapted for Kaiser/Vogue. Feel free to give it a go at your own risk!
This is an alpha and still needs a fair bit of work to get it running to it's full potential but you can get an idea of what it will be like. Feel free to report any bugs that you find, by this i mean application crashes and things that don't work or look correct. I already know the system can hang and it isn't as fast a froyo
I have had to make a LOT of modifications for this to work, some of which may affect battery life but i haven't tested it for long enough to know so let me know how it goes. I'm bound to have messed a few things up but i'll continue to work on it when i get time
All the usual things are working as far as i know, i have not tested GPS fully and the camera is as always not fully functional.
All of this is thanks to the guys working on the CyanogenMod roms and of course, none of this would work without all the hard work on the kernel so big thanks to dzo, l1q1d etc...
-------------------------------------------------------------------------------------
RLS 1:
Initial Release
Includes most of the Google Apps including Maps, Gmail etc..
Latest Market is included
LINKS:
RLS1 :
English : http://www.mediafire.com/?6708ud8kc9l9ex5
All Languages : Coming soon hopefully.....
I will try and get some screen shots posted for those that like pretty pictures
I think that's it for now, have fun
Click to expand...
Click to collapse
This might be a stupid question but I need to ask anyway...is CM 7 based on gingerbread?

-Arturo- said:
This might be a stupid question but I need to ask anyway...is CM 7 based on gingerbread?
Click to expand...
Click to collapse
It is indeed

scooter1556 said:
It is indeed
Click to expand...
Click to collapse
Excellent, thanks Scooter.

downloading now keep up the good work man

woot...gonna give it shot ... hoping for not getting same data/wifi reboots

woow, million thanks to you scooter
finally a gingerbread based build for our kaiser
btw, which kernel do you suggest for this build?
thanks in advance

Hmm for some reason I cannot boot to android the phone has been stuck in boot loop for the last 15 minutes. I have an app.img file with about 80 applications so this might be a problem I'll try to boot it without the app.img. Both data and system on sd card imgs + latest '25 kernel.
Edit.
Ok I have removed the apps.img and it still doesn't boot.
I have noticed that there have only been modules for '32 kernel included in the build. Should it work with '25 kernel with proper modules added?

I'll wait for All Languages version to test it with the new kernel.

1. this was my first attempt to instal android on nand.. noob here ;P
downloaded kernel VOGUIMG-320-FROYO-01-16-11.NBH, then changed with editor to kaiser and painel 2. Install occured ok.... but phone isn't working.. "no service".
2. I do i see my batery status? can only see that bar on the top but don't no accurate bat status in %.
3. after this install can i install another another version overwrithing this one? for example now the phone isn't working so i want to change to another version of android can i simply put another "androidinstal.tar" in andboot folder and install?
Thanks and sorry for this noob questions...

chinomoreno said:
1. this was my first attempt to instal android on nand.. noob here ;P
downloaded kernel VOGUIMG-320-FROYO-01-16-11.NBH, then changed with editor to kaiser and painel 2. Install occured ok.... but phone isn't working.. "no service".
2. I do i see my batery status? can only see that bar on the top but don't no accurate bat status in %.
3. after this install can i install another another version overwrithing this one? for example now the phone isn't working so i want to change to another version of android can i simply put another "androidinstal.tar" in andboot folder and install?
Thanks and sorry for this noob questions...
Click to expand...
Click to collapse
YES! you can
To view Battery percentage, you need to set that in Cyanogenmod Settings (correct me if I'm wrong here since its been ages when I used CM build)

Yes, you can do that it's actually very simple. Just remember to edit your .nbh before every install if you are changing versions (donut, froyo, eclair).
Cheers. Welcome to Android world

-Arturo- said:
Hmm for some reason I cannot boot to android the phone has been stuck in boot loop for the last 15 minutes. I have an app.img file with about 80 applications so this might be a problem I'll try to boot it without the app.img. Both data and system on sd card imgs + latest '25 kernel.
Edit.
Ok I have removed the apps.img and it still doesn't boot.
Click to expand...
Click to collapse
Try a .32 kernel, also i have only tested it on NAND so it may be an issue with Haret. To be honest we're lucky it works with the .32 kernel so i expect problems with the .25 kernel. Sorry

scooter1556 said:
Try a .32 kernel, also i have only tested it on NAND so it may be an issue with Haret. To be honest we're lucky it works with the .32 kernel so i expect problems with the .25 kernel. Sorry
Click to expand...
Click to collapse
Yes I have noticed that there have only been '32 modules included in the build.
I think I'm going to skip the '32 kernel as It was acting up on me in the past. I'll try nand install in the evening hopefully it will work. Thanks Scooter.

-Rif- said:
woow, million thanks to you scooter
finally a gingerbread based build for our kaiser
btw, which kernel do you suggest for this build?
thanks in advance
Click to expand...
Click to collapse
I recommend using the latest .32 kernel you can find, either one that L1q1d has compiled or one from Clemsyn's thread You can find the latest kernel here: http://androidhtc.git.sourceforge.n...7c0bf5edc4f5c6d64ce4df29254e8332ce26b;hb=HEAD

Well have installed 6.1 and phone now works... =)
Will wait until a new version of this one to come out and then try again...
- Already found how to show percentage in bar status thanks dark_prince.
- Thanks for advice slimas, to edit .nbh do i need to reinstall kernel? and can i reinstall without mess up with previous android install or do i need to install again android?
- Some bugs that occurred to me .. sometimes bar on the bottom disappear can't access apps... ; some freezing sometimes, do you guys recommend to overlock? if so how to do it? Weather widget can't find info too lol not a serious prob...
I'm reading forum and these are some questions i couldn't find answer, for now i think that's all.. i'm enjoying android on kaiser think this is the time i will change forever...
thanks for fast feedback any good tips are welcome ;P

chinomoreno said:
- Some bugs that occurred to me .. sometimes bar on the bottom disappear can't access apps... ; some freezing sometimes, do you guys recommend to overlock? if so how to do it? Weather widget can't find info too lol not a serious prob...
Click to expand...
Click to collapse
The bar at the bottom of the scrren can disappear if you swipe down on the screen, it is a bit random but is a flaw in ADW launcher. To get it back you need to press the 'menu' button and go to 'settings' then go to 'ADW Settings, UI Settings and untick 'Dockbar'. Re-select 'Dockbar' and exit settings and it should be back I expect some freezing, it is still under heavy development and our devices are quite limited hardware wise so there won't be any miracles yet I overclock my Kaiser to 500Hz using ATools, a lot of people don't recommend it but it is what i have always done and i have never had any problems, it speeds the phone up a fair amount. Just tick the option when editing your NBH. The phone obviously needs to be connected to data or wifi for weather widget to get location information, i just tried it with wifi and it worked ok, there may be an issue with data though, i'll look into it Thanks for testing.

CAMERA
camera is not working properly but it looks awesome i will try to apply the update from previous cm to see if this will work

camera
after applying the update android can`t start so i am going reinstall it

[ROM][AOSP][CDMA] gorilla_toro-AOSP-v1 4.0.3 UPDATE 1/2/11

JUST ANOTHER AOSP BUILD!
This is an AOSP Build of 4.0.3 I have made basically no changes as of right now. I have fixed tethering and market restore. I plan to add some useful modifications in the future.
Gapps-403_signed.zip
md5sum cf82c67056c31101cfed0f936cac29c1
Gorilla-toro_AOSP_v1.1.zip
md5sum 9ce8af2122bd743862c0aa6d49bed97d
Full wipe if coming from any other ROM. Especially if they have made framework changes.
Use my gapps if you want to make sure market restore works. These are the same as the latest that are floating around I just included google backup transport apk in mine.
Google Wallet - download the unmodified apk. Install as usual after full wipe. Seems to work, I haven't used it recently though.
Kernel - Stock for now.
Also I can't check any of the NFC stuff because I don't know anyone else with an NFC enabled phone.
Big thanks to everyone as usual, CM Team, RootzWiki, RootzBoat, Birdman, Pete of Bugless Beast fame, I looked at all of their vendor make files to figure out how to set those up.
Source Code: Google AOSP 4.0.3 Master Branch - my changes will uploaded tonight when I get off work to my github.
Post any issues that you notice. I don't expect many though since it is currently a pure AOSP build.

MD5 Sums are correct now.
Facebook Sync fixed, added reboot recovery menu.
Google wallet works. Do a fresh install of Google Wallet after wiping.
I am working on the camera panorama mode.

Reserved one more time

Post on Rootzwiki?

I shall later today. I want to get my source uploaded to my github. Otherwise I will get hear a lot of whining..as in source, source, source..... Just here for now. Upload there tonight or in the morning.

Thanks for this. I've been looking for a mostly-stock 4.0.3 ROM.

This is EXACTLY what I have been looking for! Thank you!
My only reservation is that I really don't want to wipe my device as I've only recently got everything sorted the way I wanted it on my phone. Is there a quick and dirty way to unlock the tethering capabilities with ADB or Root Explorer? Or is that part of the framework that would have to be properly flashed with the installation of a new ROM like this one?

It is part of the Frameworks. It is built into the system. There is no quick and dirty way. You could do a titanium back up and restore everything after the flash. The changes are minimal and should not affect anything from another build. I suppose there could be problems if you restore from 4.02 to 4.03 but you can always Nandroid and try it if you like.
Going to post an update today. It will have working FB sync and a file manager built in from CM otherwise no changes.

do i install this with CWM? can someone tell me how to install this?

I'll be checking this one out soon, been waiting for an all stock 4.0.3
A couple quick questions:
Is it rooted?
Does it have busybox?
Is it deodexed?
On a side note, the md5sums you have listed, are the same for both files

Does anyone else get a force close when using panorama mode in the camera?
Sent from my Galaxy Nexus using xda premium

jimmytinsnips said:
Does anyone else get a force close when using panorama mode in the camera?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I sure do. Tried to fix permissions to see if that would help to no avail.

Can you rent and watch movies from the market? Each rom I try, it seems either tethering is unlocked, or you can rent and watch movies. I would love a rom where I can do both.

I am now working on Panorama mode. Just found that it force closes, because I never use it. The current release has the Facebook fix, thanks to team kang, also I added in a reboot recovery menu. Otherwise it is stock with working tethering.
I will let you know when I see why panaorma isn't working.

Thanks. I don't use Panorama much, but it's nice to have the feature available.

I will post an update to fix the camera it is simply due to a couple of missing libs that I didn't add to the extract.sh script. I will also fix it and post the updated rom tonight. I am not sure about movies from the market. I think that has something to do with rooted devices and googles agreements with the copyright holders. Probably due to piracy concerns.
Let me know if you notice any other bugs. There really shouldn't be many since it is basically a pure AOSP build.

Gr8gorilla said:
I will post an update to fix the camera it is simply due to a couple of missing libs that I didn't add to the extract.sh script. I will also fix it and post the updated rom tonight. I am not sure about movies from the market. I think that has something to do with rooted devices and googles agreements with the copyright holders. Probably due to piracy concerns.
Let me know if you notice any other bugs. There really shouldn't be many since it is basically a pure AOSP build.
Click to expand...
Click to collapse
While you're fixing the panoramic camera, would you be able (and willing) to add back the original live wallpapers and ringtones? Or if not in the build itself, perhaps a separate flashable zip file that would add them back? I tried (and failed) to modify your ROM with these original files added back in and, of course, I only got a bootloop.
If you need the files, I can adb pull them for you and zip them up easily.
Thanks again for your awesome ROM.

j.bruha said:
While you're fixing the panoramic camera, would you be able (and willing) to add back the original live wallpapers and ringtones? Or if not in the build itself, perhaps a separate flashable zip file that would add them back? I tried (and failed) to modify your ROM with these original files added back in and, of course, I only got a bootloop.
If you need the files, I can adb pull them for you and zip them up easily.
Thanks again for your awesome ROM.
Click to expand...
Click to collapse
Sure, no problem. Zip them up and upload them to dropbox or multiupload or something and I will fix it up over the weekend.
Also, Sorry for the delay on teh camera fix. I have just been extremely busy with a project that is a few days past deadline at work. Unfortunately, real life has to come first....

Flashed the update...lost my camera completely...
Sent from my Galaxy Nexus using xda premium

Wow, that's Crazy. Sorry I have not been maintaining the thread here. School has me so busy I just don't have the time right now. I am in a Physics Class, Electricity, Electromagnetism, and fiberoptics. And at the same time in an advanced Computer Science Class with 4 hours of Elective Classes....Kinda busy....

[ROM][AOSP 2.3.7] OMFGB compiled and ported

Hy all,
inspired by this thread I spend some spare time in compiling OMFGB sources for use with the hero gsm.
Because of the fact, that I did not manage to successfully compile the OMFGB sources directly for the hero gsm (compiling was OK but could not get rom to boot) I did it the other way.
I compiled the sources for the hero cdma (heroc) and afterwards ported it to hero gsm.
I integrated Erasmux fly-kernel 13 since I used it with all other hero roms before.
After testing the rom for ~1 week (also my son is quite satisfied with it) I decided to share it.
I took out some apps that were not usable (for example God Mode) and put in minimal gapps so that it's possible to sign in on google account and run market.
Also I replaced the LatinIME.apk with the CMs one to get other keyboard layouts than querty.
I'd recommend to install morelocale2 to be able to dial 123456 instead of 123-456.
What I have to say is that I'm by far no developer (at least not on android platform).
Download
OMFGB-Hero -www.2shared.com
OMFGB-Hero - www.mediafire.com
Thanks and credits go to
OMFGB Team for their sources
Erasmux for the kernel
stritfajt and bharat_goku for their patients and giving me directions

i'll take a look at this when i've got some spare time

Thanks for the ROM but OMFGB without God mode? its like CM7 without CM settings lol D

cartman333 said:
Thanks for the ROM but OMFGB without God mode? its like CM7 without CM settings lol D
Click to expand...
Click to collapse
God mode seems not to be compatible with hero, all menu entries were grayed out, so I decided to delete it from package.
Maybe someone has a clue how to get it run

Can you upload it to some other site? I can't seem to download from 2shared.

aca89 said:
Can you upload it to some other site? I can't seem to download from 2shared.
Click to expand...
Click to collapse
Uploaded to mediafire

Just checked the zip,replace the heroc files in use/keylayout,keychars wit similar files from a hero rom,basically key functionality
Sent from my Hero using xda premium

bharat_goku said:
Just checked the zip,replace the heroc files in use/keylayout,keychars wit similar files from a hero rom,basically key functionality
Sent from my Hero using xda premium
Click to expand...
Click to collapse
I ported and tested the rom step by step.
Since all keys work as they should, I skipped this step.

I gave it a go. Not bad, for some reason I had extremely good wifi reception using this ROM, so that's good. Really missed some kind of advanced settings 'cause I use a lot of options from there and that was a dealbreaker . Also a2ext didn't work, so I had to flash darktremor script which caused i few random reboots. All in all, a solid ROM which could be much improved.
Cheers

aca89 said:
I gave it a go. Not bad, for some reason I had extremely good wifi reception using this ROM, so that's good. Really missed some kind of advanced settings 'cause I use a lot of options from there and that was a dealbreaker . Also a2ext didn't work, so I had to flash darktremor script which caused i few random reboots. All in all, a solid ROM which could be much improved.
Cheers
Click to expand...
Click to collapse
For the advanced settings, I could not get the God_Mode fully working so far.
For a2ext, I don't use it since I don't need it.
My son, which has a hero too, uses a lot of games.
For him I did custom mtd layout, much faster than a2ext cause it's kept all internal.

Please add the Russian.

[SOLVED] openVPN on 4.1.2, missing VPNService API

Guys, the vpn API is supposed to be in ICS and up. I had this working on some kernel and Tweaked 2.5 (a 4.1.2 ROM) a while ago. Going back now, I cannot find any kernel which works with the various openVPN clients, all giving the same "missing vpn api" error after a clean install of Tweaked.
Any fricking idea what's up? I used the kun.to enabler in the market to no avail, even though I had never used that before when openVPN just worked previously. Am out of ideas!
kernels tried:
stock BMD1
Saber 45.3
Devil 0.21
PBJ (option in Tweaked)
Trinity (option in Tweaked)
Perseus Alpha
N.E.A.K.
edit: tried the various openVPN installers in the market, all to no avail. WTH? Beginning to wonder if openVPN is possible at all on a Note 2 4.1.2 ROM. Maybe I'm crazy and never had it running. Anyone?

[SOLVED]
For future reference for others...
After installing FeatVPN and getting error code M20, Googling revealed that was caused by a missing VpnDialogs.apk from /system/app.
I found a copy in this thread. DL'ed, copied over, done, problem solved.
Total mystery how I had openVPN working before on Tweaked.

Need help with mine.
I know this thread is a little out of date but I downloaded the apk and set the permissions.. tried to install it like normal and it will not install and tried to place it in the system/app folder.. have it on r- r- rw.. but every app I use says my android does not support vpn api or that it can not find the files.. I used to have it and just debloated my device never thinking I would use it and now I need it! Any help or ideas? Thank you! XD