Develop Bugs

[Q] Setvsel not working for MotoGinger 2.3.4

Hi all,
I tried to run setvsel on MotoGinger 2.3.4 but it just rebooted my phone, So i guessed the ko overclock module might be missing and installed the "milestone overclock" but I'm unable to load the module as the device name is MB526 and not MB525.
Did anybody try setting the vsel? will the setvsel work if we push the overclock module using adb?

vikrambharadwaj said:
Hi all,
I tried to run setvsel on MotoGinger 2.3.4 but it just rebooted my phone, So i guessed the ko overclock module might be missing and installed the "milestone overclock" but I'm unable to load the module as the device name is MB526 and not MB525.
Did anybody try setting the vsel? will the setvsel work if we push the overclock module using adb?
Click to expand...
Click to collapse
I installed the 2ndInit and enabled overlocking there in its own menü.
I also enabled the modules there.
After that Setvsel worked perfectly without Milestoneoverlock.
Attila

MooonWalker said:
I installed the 2ndInit and enabled overlocking there in its own menü.
I also enabled the modules there.
After that Setvsel worked perfectly without Milestoneoverlock.
Attila
Click to expand...
Click to collapse
Awesome.. It worked for me as well.. Thanks..

BTW.. Whats your vsel settings?

i am just experiencing with some undervoltage and thinking
over if i really need 1100MHz at all...

I usually dont play high graphic games, So I dont even need 1000 Mhz, I have set my vsel to [email protected], [email protected], [email protected] and [email protected] I usually travel a lot so I need a big powersaving rom, Looks like motoGinger is quite good so far..

What's the effect, conflict or different between just enable overclock and its modules in 2nd-init than enable overclock in 2nd-init followed with running setvsel to perform the overclocking??
1) will the device get overclocking by just enable it in 2nd-init?
2) Or we must install setvsel to make it run overclock properly?

farsight73 said:
What's the effect, conflict or different between just enable overclock and its modules in 2nd-init than enable overclock in 2nd-init followed with running setvsel to perform the overclocking??
1) will the device get overclocking by just enable it in 2nd-init?
2) Or we must install setvsel to make it run overclock properly?
Click to expand...
Click to collapse
good question, Even I was just wondering, Which one gets the priority? is it the setvsel or the 2nd init?
My only guess is the control first goes to 2ndinit during bootup and after it comes to the idle screen and we see the msg from Su for setvsel it takes over the priority.
Correct me if I'm wrong..

farsight73 said:
What's the effect, conflict or different between just enable overclock and its modules in 2nd-init than enable overclock in 2nd-init followed with running setvsel to perform the overclocking??
1) will the device get overclocking by just enable it in 2nd-init?
2) Or we must install setvsel to make it run overclock properly?
Click to expand...
Click to collapse
1. Yes, the device is overclocked from 2nd-init if you enable that.
2. SetVsel is good for batery saving, with settings like limit to vsel1 while screen off, etc, so SetVsel is a "must have" on Defy.

MooonWalker said:
I installed the 2ndInit and enabled overlocking there in its own menü.
I also enabled the modules there.
After that Setvsel worked perfectly without Milestoneoverlock.
Attila
Click to expand...
Click to collapse
Can you provide information on which version of 2ndInit you're using, and which modules you enabled? Thank you.

You can use the latest 2ndinit from the market, then in system --> overclock --> status choose enable, set vsel values (mine are : 22\300, 33\600, 56\1000, 66\1200 - same values in SetVsel), save and reboot. With this settings for me SetVsel works well, without random reboots and games like NFS runs smooth.

Just Enable overclock on bootmenu and load all modules then it will work

It worked! Thanks for your help everyone!
Sent from my MB526 using XDA App

[Q] May someone teach me about scripts?? Please?

After a year of owning this EVO, the last few months my phone just sucks..
Laggy as hell.. Embarrassing to say the least.. Started with fresh, then when to Warm2 or whatever it was called..
Finally my phone became so laggy, probably due to the fact I ran up my 8 gig SD card and internal memory..
Went ahead and installed Synergy RLS1.. Didn't fix much of the problem.. so I decided to format the SDcard and do the partition deal.. Installed Synergy with God mode.
Things are even worse now.. Its just horrible, between the 4G, being stuck trying to turn on, things force closing.. Just horrible..
So I want to switch back to RLS1, but before I do so I thought I would ask you guys for your expertise as I've gotten over the years being here..
Whats the deal with "scripts" I know NOTHING about them and trying to read them is making my brain hurt..
I just want a smooth running phone with everything working.. I've read that scripts or whatever is the answer to making things non laggy again..
So Im going to flash Synergy RLS1 now.. Then would like to know what scripts and how?
Thanks guys!

I don't know much but I read up on everything and currently I'm running Cyanogenmod 7.1 RC with Tiamat 4.07 SBC. I set up V6 Supercharger and put it on MegaRam and my phone is running better than it ever has. As well as apps that force close often on stock, barely ever force close on my set up.

Thanks..
Im looking to see if someone could explain to me how to run a script and which one like I'm a 5 year old.. lol
Currently I just flashed Synergy RLS1 and would like to run the scripts deal.. This is all new to me..

The thread that zepplinrox has goes into detail, made pretty simple for human consumption. Basically you need to download two things. One is BusyBox Installer. This will allow you to run install BusyBox 1.18.2. This is what is needed to get you phone to understand the script. The second app you need is Script Manager. This is an interface that makes running the script as easy as opening a file in Astro or File Manager. Download the script, In this case you want the V6 Supercharger, and place it on the root of the sdcard.
After it is on the card, and you have the other two apps installed, open Script Manager and allow it root access through Superuser. Scroll to the bottom of SM and choose the Supercharger script. It will look like you are running a dos prompt. Check the box that says "run as root" and the run the script. From there just follow the instructions on the screen and Viola. You have a sweet running EVO.
Tapping from the toilet with MikG.

CDKJudoka said:
The thread that zepplinrox has goes into detail, made pretty simple for human consumption. Basically you need to download two things. One is BusyBox Installer. This will allow you to run install BusyBox 1.18.2. This is what is needed to get you phone to understand the script. The second app you need is Script Manager. This is an interface that makes running the script as easy as opening a file in Astro or File Manager. Download the script, In this case you want the V6 Supercharger, and place it on the root of the sdcard.
After it is on the card, and you have the other two apps installed, open Script Manager and allow it root access through Superuser. Scroll to the bottom of SM and choose the Supercharger script. It will look like you are running a dos prompt. Check the box that says "run as root" and the run the script. From there just follow the instructions on the screen and Viola. You have a sweet running EVO.
Tapping from the toilet with MikG.
Click to expand...
Click to collapse
thank you.. Correct me if I'm wrong..
What I am to do is the following in order..
#1 Download and install "Busy box 1.18.2."
#2 Download and install "Script Manager"
#3 Download "V6 Supercharger" and put it on the root of the SDcard
#4 Open Script Manager and scroll to the SDcard and open "V6 Supercharger" it will run automatically, just check off "run as root"
Is this all correct?
If so, Where do I get these 3 files from? Also, can this all be done from my phone? I mean I can download all the files from my computer and just move them over to my phone correct? I don't need to install any of these on my computer do I?
THANKS BRO!
EDIT** I see "Script Manager" In the market as well "Busy Box"
Do I download and install both of these?
EDIT##2
I downloaded both Busybox and Script manager from market..
When I open Busy box it asks me which version to install.
Here are the options
It says current version is V.1.18.4
and it says
1.19.2
1.18.5
1.18.4
1.17.1
??? THANKS

Ok..
So I did it..
I got the right busybox version and installed that.. Then installed script manager
I downloaded 1 file
V6_SuperCharger_for_Android-update7.sh.txt
There was an update8 but nothing mentioned 8 so I just went with 7
I checked off run as root, and ran the script.. It asked for options 1-16.. I picked number 6, which is balanced 3 or whatever..
Then after it was all over, I chose option 16 to reboot..
Phone is rebooted..
Seems ok so far.. How do I ensure its working? It seems snappier thats for sure..

When mine got like that, I just ran the RUU for my phone and started over. Fixed everything just fine.

fastfed said:
Thanks..
Im looking to see if someone could explain to me how to run a script and which one like I'm a 5 year old.. lol
Currently I just flashed Synergy RLS1 and would like to run the scripts deal.. This is all new to me..
Click to expand...
Click to collapse
one question i have is: is your SD card partitioned with an EXT partition?
if you look through the Synergy RLS1 thread it appears to be a known issue that having a partitioned SD card can cause your phone to run slow (especially if you have a slow SD card) since the synergy ROM by default has a lot run off the EXT partition if it is present.
even though i have a class 6 SD card (it is fairly fast) i still experianced slow issues and or laggy issues.
to fix the issue you can install Dark Tremor A2SD from the synergy updater app. when you have this installed you can tell the phone to not run stuff from the SD card.

LOL with the amount of information I'm gonna explode..LOL
First all I read about what how great it is to partition your sdcard.. now soomeone is saying its bad ... its running pretty damn good now.. since I ran this new script deal at least... I will see how its running in the coming days.. thanks
Sent from my PC36100 using XDA App

I know that Synergy has some of the best Dev's there are working on it, but as much as I've read, I sometimes think it's about as reliable as ROM Manager and CWM, as in not reliable

Can someone tell me if there is any other scripts I should run??
Right now all I ran was V6supercharger
Should I run other ones as well? And if so can someone point me to the right spot? THANKS

Bump!!! Anyone?

BUMP!!! Anyone??
Installed the V6supercharger script and want to know since this one is so great, is there any others I should install as well?

If you're running AOSP, the vipermod is great, to undervolt. It can be found in the development section.

teh roxxorz said:
If you're running AOSP, the vipermod is great, to undervolt. It can be found in the development section.
Click to expand...
Click to collapse
huh?
I'm running synergy rom, non god mode..
Was looking for the scripts deal... Like the V6supercharger one...

fastfed said:
huh?
I'm running synergy rom, non god mode..
Was looking for the scripts deal... Like the V6supercharger one...
Click to expand...
Click to collapse
Yes it is a script. I didn't know you were running sense, as why I said you could try it if you were on AOSP; there is an equivalent to the vipermod for sense by calkulin, though I don't know it by name.

If your phone is running smoothly now, I wouldn't mess with it. V6 is great, especially for those on Sense roms. I tried it on AOSP and didn't really notice much of a change, but my phone runs smoothly already.
If you're getting some lag on your larger apps, like your launcher, you can try increasing the dalvik vm heap size to ~40 or above if needed. The easiest way to do so would be with the app "VM Heap Tool". It shouldn't counteract with V6 in any way, but if it does then you can just set it back to 32.
But as I said, if you're happy with your phone at this point, then don't change anything. Also realize that scripts are not the only way to improve your phone's performance. This script worked for you, but that doesn't mean someone else's suggestion is less helpful because it isn't a script (or because you don't know what it is and think that it isn't a script). A script is just a means for performing some action on your phone.
And since you're happy with V6 SuperCharger & it helped you - you should head over to the original thread for it and click the thanks button for zepplinrox if you haven't already.
Sent from my PC36100 using Tapatalk

Thank you sir for the helpful info. But can you please link to the thread that talks about scripts?
Thank you.
---------- Post added at 12:54 PM ---------- Previous post was at 12:26 PM ----------
CDKJudoka said:
The thread that zepplinrox has goes into detail, made pretty simple for human consumption. Basically you need to download two things. One is BusyBox Installer. This will allow you to run install BusyBox 1.18.2. This is what is needed to get you phone to understand the script. The second app you need is Script Manager. This is an interface that makes running the script as easy as opening a file in Astro or File Manager. Download the script, In this case you want the V6 Supercharger, and place it on the root of the sdcard.
After it is on the card, and you have the other two apps installed, open Script Manager and allow it root access through Superuser. Scroll to the bottom of SM and choose the Supercharger script. It will look like you are running a dos prompt. Check the box that says "run as root" and the run the script. From there just follow the instructions on the screen and Viola. You have a sweet running EVO.
Tapping from the toilet with MikG.
Click to expand...
Click to collapse
LOL I created a thread asking why I needed busybox. Now I know.
Thanks

Try this thread which seems to be the go-to thread about the V6 Supercharge script:
http://forum.xda-developers.com/showthread.php?t=1093687

[Q] How do I keep Sense from being shutdown due to OOM

Ever since I received the upgrade to gingerbread (first 4.06 and now 4.08), Sense will get shut down when I am in other applications. Then when I hit the home button I get the white "HTC" screen and then sense has to start up and reload all my home screens and widgets. It typically happens when I use the browser but has sometimes happens when in other applications.
Here are the things I've tried to keep this from happening:
* reducing the number of things on my home screens
* removed all widgets to try and reduce the memory footprint
* factory reset/cleared dalvik cache
* renice <htc.com.launcher process> -20
* installed Auto memory manager (AMM) and set it to "aggressive" mode
* using AMM reset the priority of "HTC Sense" from 6 down to 2 and specified "always keep alive" but the kernel seems to just reset the priority.
What's really annoying is when I look at the list of processes, things like facebook and weatherbug have a higher (meaning lower number) priority than Sense. Does anyone have any idea how to force Sense to be given priority over other apps so it can stop from being shut down?
tia,
John

swindelljd said:
Ever since I received the upgrade to gingerbread (first 4.06 and now 4.08), Sense will get shut down when I am in other applications. Then when I hit the home button I get the white "HTC" screen and then sense has to start up and reload all my home screens and widgets. It typically happens when I use the browser but has sometimes happens when in other applications.
Here are the things I've tried to keep this from happening:
* reducing the number of things on my home screens
* removed all widgets to try and reduce the memory footprint
* factory reset/cleared dalvik cache
* renice <htc.com.launcher process> -20
* installed Auto memory manager (AMM) and set it to "aggressive" mode
* using AMM reset the priority of "HTC Sense" from 6 down to 2 and specified "always keep alive" but the kernel seems to just reset the priority.
What's really annoying is when I look at the list of processes, things like facebook and weatherbug have a higher (meaning lower number) priority than Sense. Does anyone have any idea how to force Sense to be given priority over other apps so it can stop from being shut down?
tia,
John
Click to expand...
Click to collapse
with any OTA its recommended to do a factory reset. did you do this? its a pain to loss all your data but it might fix your problems.
sorry i didnt have my morning coffee yet.... If you wiped dalvik then that means you have root. your phone is not shutting down. something is killing rosie (the sense launcher.) and that why the white HTC splash screen comes up again. What rom are you runing? i know its the OTA but is it the RUU or one of the devs roms based off RUU??

swindelljd said:
Here are the things I've tried to keep this from happening:
* reducing the number of things on my home screens
* removed all widgets to try and reduce the memory footprint
* factory reset/cleared dalvik cache
Click to expand...
Click to collapse
If you read his entire post you would know he did a factory reset.
My best guess is to go back to stock sense before the last ota (by rooting and flashing or whatever way you wish..sbf or whatever) then download the ota on your computer and try manually updating your phone..if that doesn't work then I don't know
/Droid3

What about bulletproofing the launcher with V6 Supercharger?
Sent from my ADR6300 using XDA App

RamAir02 said:
What about bulletproofing the launcher with V6 Supercharger?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
That worked for me.

synisterwolf said:
... i know its the OTA but is it the RUU or one of the devs roms based off RUU??
Click to expand...
Click to collapse
Most recently I am running the stock 4.08 version starting with applying the 4.06 RUU and then applying the 4.06 to 4.08 update file. I do have root and really use it for monitoring/managing the /data/data partition.
RamAir02 said:
What about bulletproofing the launcher with V6 Supercharger?
Click to expand...
Click to collapse
Whoa, that looks pretty serious. I'll have to read that through first so I can understand what it's doing and so I don't accidentally brick my phone.

swindelljd said:
Most recently I am running the stock 4.08 version starting with applying the 4.06 RUU and then applying the 4.06 to 4.08 update file. I do have root and really use it for monitoring/managing the /data/data partition.
Whoa, that looks pretty serious. I'll have to read that through first so I can understand what it's doing and so I don't accidentally brick my phone.
Click to expand...
Click to collapse
There's no risk of brick with v6. It just tweaked a couple parts of the kernel.
Sent from my ADR6300 using Tapatalk

swindelljd said:
Whoa, that looks pretty serious. I'll have to read that through first so I can understand what it's doing and so I don't accidentally brick my phone.
Click to expand...
Click to collapse
You'll just want to make sure you have busybox 1.18.2 installed, then run the script with Script Manager, and you'll want to select either 6 or 7 (I use option 7), then reboot. It won't brick your phone, but you can always run a nandroid backup to have something to fall back to.

RMarkwald said:
You'll just want to make sure you have busybox 1.18.2 installed, then run the script with Script Manager, and you'll want to select either 6 or 7 (I use option 7), then reboot. It won't brick your phone, but you can always run a nandroid backup to have something to fall back to.
Click to expand...
Click to collapse
Is this the correct script manager app: https://market.android.com/details?id=os.tools.scriptmanager ?
Noob question, how do I check which version of busybox I have installed. I found one in TitaniumBackup that is 1.18.14 but that looks like it is local to TitaniumBackup. I did find "toolbox" in /system/bin which looks like the stock rom's version of busybox. Is this what I should be looking at or is busybox installed somewhere else?

swindelljd said:
Is this the correct script manager app: https://market.android.com/details?id=os.tools.scriptmanager ?
Noob question, how do I check which version of busybox I have installed. I found one in TitaniumBackup that is 1.18.14 but that looks like it is local to TitaniumBackup. I did find "toolbox" in /system/bin which looks like the stock rom's version of busybox. Is this what I should be looking at or is busybox installed somewhere else?
Click to expand...
Click to collapse
Yes, that's the app.
Download this app as well: Busybox Installer
It'll tell you what version you have (if you have it), then you can select what version you want to install. No need to adjust where it installs, just leave that at the default, just select version 1.18.2, then hit Install.

I read through the script just to get a sense (no pun intended) of what it was doing and then installed Busybox 1.18.2 and applied setting 11 "Hard to kill launcher" from the script. I've done a bunch of browsing to sites that normally caused Sense to get shut down and so far so good.
I initially installed busybox with symlinks and it the script threw a ton of errors so I reinstalled with symlinks to fix that.
Thanks for all the help. For completeness, here is a link to V6 Supercharger so all the links are in this one thread http://forum.xda-developers.com/showthread.php?t=991276 .
One thing I did have to change because I am running Sense and not a stock android launcher is the name of the launcher process itself.
On line 64, I changed this "pidof com.android.launcher" to this "pidof com.htc.launcher"

will the V6 script it just tells the android memory system to not reclaim memory from the launcher app so it stays on no matter what happens. only way to kill it is to go to settings and FC the launcher. also with the script you cant brick the phone because its not ran till after the phone boots. The term brick means : that the phone will not boot at all. you just have a phone that does nothing at all not even turn on. You can soft brick the phone meaning the software will not boot. all you need to do is make a backup before installing the script and you will always have a way back if anything happens.
for me i run the beta V6 script option under -=*512HP*=- which is more of a balanced one with bullet prof launcher and its is wonderful. but each phone is different so just try them out and see what works for you.

synisterwolf said:
... You can soft brick the phone meaning the software will not boot. ...
Click to expand...
Click to collapse
I did "soft" brick the phone recently when I deleted build.prop and forgot to put a new one in it's place before I rebooted. Had to use adb to access the phone to restore build.prop. I can tell you that was a nervous few minutes after I realized what I had done. Definitely not a recommended activity.

swindelljd said:
I did "soft" brick the phone recently when I deleted build.prop and forgot to put a new one in it's place before I rebooted. Had to use adb to access the phone to restore build.prop. I can tell you that was a nervous few minutes after I realized what I had done. Definitely not a recommended activity.
Click to expand...
Click to collapse
Yeah, you kinda need that one there!
Good job getting it replaced using adb and all, good to hear you figured it out!

swindelljd said:
I did "soft" brick the phone recently when I deleted build.prop and forgot to put a new one in it's place before I rebooted. Had to use adb to access the phone to restore build.prop. I can tell you that was a nervous few minutes after I realized what I had done. Definitely not a recommended activity.
Click to expand...
Click to collapse
yes that will do it. lol i did that a long time ago when i wanted to edit it my fat finger deleted it. now as good practice i always make a copy of it but add .bak at the end of it so if i do delete it i can just replace it before reboot.

I've been using options 1, 8, and 12 in the V6 Supercharger and my phone has been running great. What options did everyone else choose?

Auroraplay v1.1.0

Hi,
Since i can't post in the thread, so I just highlight in here.
I've been using this rom for about a month. This rom is really nice but since the new update, it gets even better. Only one small thing, the LED flashlight widget in the quickpanel didn't show up although you have tick it in the settings.
That's all. I hope someone could tell this to Spizzy01 so that he can fix this.
Thanks...

matfai said:
Hi,
Since i can't post in the thread, so I just highlight in here.
I've been using this rom for about a month. This rom is really nice but since the new update, it gets even better. Only one small thing, the LED flashlight widget in the quickpanel didn't show up although you have tick it in the settings.
That's all. I hope someone could tell this to Spizzy01 so that he can fix this.
Thanks...
Click to expand...
Click to collapse
Most probably Spizzy01 has removed the flashlight because there is a bug with camera !!

Really?? Well, I didn't know that....
Thanks for a fast reply...

Swipe to move switch icons? No, havent listened...

Aurora Play Problems
Hello,
I just installed Aurora Play 1.1.0 and I am having problems which I think might be related to superuser.
The Rom works fine, but anything that requires root access gets frozen in place. My phone is rooted, I am pretty sure of it - not only the bootloader is unlocked but also, I did manage to initially change the clock speed to 1.4 ghz, and that change has remained so far.
However, if, for example, I try enabling root access on the ES File Explorer, it simply freezes the app (sort of like it is waiting for the confirmation from Superuser, but it never comes). I only ever saw the superuser authorization screen once when I changed the clock at first.
I am pretty sure the OC is not the problem, since I reinstalled the rom and did no OC on the 1st time at all, but the same problem persisted.
I would try uninstalling SU and installing that other superuser app on the market to see if that would solve the problem, but I couldn't manage to uninstall it.
Any thoughts on this? I would love to solve this problem since this room is outstanding on all other accounts.
PS.: I followed all instructions to the letter, and like I said I tried reinstalling the rom already. I am using Lupus v10 (tried Lupus v11 before on the 1st installation).

Fenrir007 said:
Hello,
I just installed Aurora Play 1.1.0 and I am having problems which I think might be related to superuser.
The Rom works fine, but anything that requires root access gets frozen in place. My phone is rooted, I am pretty sure of it - not only the bootloader is unlocked but also, I did manage to initially change the clock speed to 1.4 ghz, and that change has remained so far.
However, if, for example, I try enabling root access on the ES File Explorer, it simply freezes the app (sort of like it is waiting for the confirmation from Superuser, but it never comes). I only ever saw the superuser authorization screen once when I changed the clock at first.
I am pretty sure the OC is not the problem, since I reinstalled the rom and did no OC on the 1st time at all, but the same problem persisted.
I would try uninstalling SU and installing that other superuser app on the market to see if that would solve the problem, but I couldn't manage to uninstall it.
Any thoughts on this? I would love to solve this problem since this room is outstanding on all other accounts.
PS.: I followed all instructions to the letter, and like I said I tried reinstalling the rom already. I am using Lupus v10 (tried Lupus v11 before on the 1st installation).
Click to expand...
Click to collapse
Please try downloading the following ZIP and flashing it VIA clockwork mod.
Let me know the results.
http://forum.xda-developers.com/attachment.php?attachmentid=1890140&d=1366191665

Spizzy01 said:
Please try downloading the following ZIP and flashing it VIA clockwork mod.
Let me know the results.
http://forum.xda-developers.com/attachment.php?attachmentid=1890140&d=1366191665
Click to expand...
Click to collapse
Can CWM coexist with TWRP? I think I only have TWRP installed. Or can I just use TWRP instead?

missing pixels in landscape app drawer
Spizzy, first and foremost congratulations on this great rom, it is fantastic! The only gripe I'm having is that when the app drawer is in Landscape mode it is cutting some pixels on the bottom (can't see the lower end of the blue highlight when using the ps controls). Other than that, all is perfect so far.

It worked!
Thanks a lot, Spizzy! Whatever that package was, it worked great and now superuser is not giving me any headaches anymore. Everything works great and the rom is blazing fast!
Just one thing - when I checked the info that comes up on the pachage before installing it, it said it was for locked bootloaders, but I assume that was a typo (since the zip file is for unlocked, and mine is unlocked as well). Just mentioning since it could maybe cause a little confusion on people downloading it in the future.
Oh and I did use TWRP in the end - I guess it's the same thing.

[Q] Setcpu Profile issues on xperia play

Hi guys, recently ive been playing about with roms and i decided to use the aurora play rom for a bit. I had lupusv12 kernel installed at this time with profiles installed. I flashed lupusv12.5 over v12 since they had the same partitions. I also installed auroraplay rom, it came built in with no frills cpu which i didnt like. The reason for that was because it kept inter-fearing with my profiles from setcpu (not letting em work). So i decided to use a file explorer and delete the no frills cpu app built into the rom. After that set cpu's profiles still were not working. So i changed back to stock, still with the lupusv12.5 kernel, and now the profiles (eg opening gta vice city OC to 1.6ghz) still wernt working, and when i went back to setcpu it would take a while to load then crash then i would have to reopen it again for it to work. Profiles still not working, what in the world is going on? The overclocks like moving the slider to 1.6ghz still overclocks but the profiles wont do it, Its annoying to have to keep opening setcpu then open the game, then close the game then open set cpu to return to normal, really annoying, can anyone help?

SetCPU issue.
Mushtaqs said:
Hi guys, recently ive been playing about with roms and i decided to use the aurora play rom for a bit. I had lupusv12 kernel installed at this time with profiles installed. I flashed lupusv12.5 over v12 since they had the same partitions. I also installed auroraplay rom, it came built in with no frills cpu which i didnt like. The reason for that was because it kept inter-fearing with my profiles from setcpu (not letting em work). So i decided to use a file explorer and delete the no frills cpu app built into the rom. After that set cpu's profiles still were not working. So i changed back to stock, still with the lupusv12.5 kernel, and now the profiles (eg opening gta vice city OC to 1.6ghz) still wernt working, and when i went back to setcpu it would take a while to load then crash then i would have to reopen it again for it to work. Profiles still not working, what in the world is going on? The overclocks like moving the slider to 1.6ghz still overclocks but the profiles wont do it, Its annoying to have to keep opening setcpu then open the game, then close the game then open set cpu to return to normal, really annoying, can anyone help?
Click to expand...
Click to collapse
Have you already tried uninstalling the nofrills CPU app?
Deleting it on the system/app folder may affect some code that is causing an issue on your Setcpu app.
Removing the app on the root folder might not be enough to remove all the code link on the rom.
I suggest using titanium backup or any app that can uninstall a system app.

bLoodYHandZ04 said:
Have you already tried uninstalling the nofrills CPU app?
Deleting it on the system/app folder may affect some code that is causing an issue on your Setcpu app.
Removing the app on the root folder might not be enough to remove all the code link on the rom.
I suggest using titanium backup or any app that can uninstall a system app.
Click to expand...
Click to collapse
i should have said somthing sooner but i already fixed the problem, and i tried uninstalling it, and it failed, so thats why i deleted it. I fixed my issue by erasing the system/data then reflashing the stock rom and everything worked again, cheers for trying to help though. :good:

Mushtaqs said:
i should have said somthing sooner but i already fixed the problem, and i tried uninstalling it, and it failed, so thats why i deleted it. I fixed my issue by erasing the system/data then reflashing the stock rom and everything worked again, cheers for trying to help though. :good:
Click to expand...
Click to collapse
what version of setcpu are you using? because i heard issues with versions above ver 3.0.9 are having issues with profiles

xdarkmario said:
what version of setcpu are you using? because i heard issues with versions above ver 3.0.9 are having issues with profiles
Click to expand...
Click to collapse
im using the latest version 3.1.2 , somthing like that i know its higher than 3.0.9

xdarkmario said:
what version of setcpu are you using? because i heard issues with versions above ver 3.0.9 are having issues with profiles
Click to expand...
Click to collapse
im using the latest version 3.1.2 , somthing like that i know its higher than 3.0.9