posted in Reflex S Development Thread but no response
had a problem with my video recording/playback - recorded a video yesterday but lose part of the video when played (video freezes but can here sound), then jumps back end of video but without sound.
Anyone experience similar problems?
I must give props to the camera - excellent picture & improved focus (little to none shaky pics)
HELP
herb1 said:
posted in Reflex S Development Thread but no response
had a problem with my video recording/playback - recorded a video yesterday but lose part of the video when played (video freezes but can here sound), then jumps back end of video but without sound.
Anyone experience similar problems?
I must give props to the camera - excellent picture & improved focus (little to none shaky pics)
HELP
Click to expand...
Click to collapse
Have you tried with a completely fresh sd card? Freshly formatted etc ?
BigMrB said:
Have you tried with a completely fresh sd card? Freshly formatted etc ?
Click to expand...
Click to collapse
can you explain a bit...I don't see why it shouldn't work on a used sd card
herb1 said:
can you explain a bit...I don't see why it shouldn't work on a used sd card
Click to expand...
Click to collapse
It's not a suggestion of mine it's something i read in the Reflex s thread... I'm sure its all in there
Edit - I can't find the info right now i'll look later...
It's really bugging me that I can't find the info, from memory it was fresh install no wipes and freshly formatted sd....
What class sd do you have btw?
BigMrB said:
What class sd do you have btw?
Click to expand...
Click to collapse
uhmmm...dumb question, how do i check?
herb1 said:
uhmmm...dumb question, how do i check?
Click to expand...
Click to collapse
Look on your sd card or search for it online.
Sent from Oxygen
MatDrOiD said:
Look on your sd card or search for it onlin
Click to expand...
Click to collapse
didn't need the net...Class 2
herb1 said:
didn't need the net...Class 2
Click to expand...
Click to collapse
so what class SD card will I need to make a difference
Class 6 or above are good
Try downloading sd-booster and set to like 2048
It might help with sd speed? just for a quick fix - I'll try find something proper when i get chance
I tried but still the same result - guess it's off to buy another SD card
herb1 said:
I tried but still the same result - guess it's off to buy another SD card
Click to expand...
Click to collapse
I think its an on going to be fair....
one thing I did notice is that when I transferred the video to my laptop; it played with the same lag and short loss-of-sound as my HTC did
even old videos (on the phone) that played fine before, play with lag and sound loss :?
Related
http://southcape.org/2011/02/11/xdandroid-gingerbread-public-test-build/
Does anyone know if this works on HTC Touch HD and if so, how?
thanks
Already tried Gingerbread. It looks nice and works quite smooth but it's not yet ready for daily use. Other than issues posted on stinebd's blog I've also couldn't get default keyboard to work, had problems with wifi (but could be user error) and neocore wouldn't run properly.
Remember to backup your SD card before using this because it needs to be tested on clean install.
BTW. I really like the UI overhaul Google did in 2.3 =)
Hi, all!
It worx great! it is laggy but i can feel the speed!
WiFi works for me, note that in 2.2(FroYo) i can turn on the wifi only one time per boot, in that release(2.3.1) its just working every time!! (but maybe its from the modules, im using the latest)
nasko_spasko said:
Hi, all!
It worx great! it is laggy but i can feel the speed!
WiFi works for me, note that in 2.2(FroYo) i can turn on the wifi only one time per boot, in that release(2.3.1) its just working every time!! (but maybe its from the modules, im using the latest)
Click to expand...
Click to collapse
are you using it for everyday used? i also have a blackstone which using Huwei 8150 cherry pie build 2.
neo_zycho said:
are you using it for everyday used? i also have a blackstone which using Huwei 8150 cherry pie build 2.
Click to expand...
Click to collapse
Nope, i didn't. It is not yet optimized, but its quite fast, even not optimized
(in earlier development state). HW3D does not work! I think by Default
there is not a daily use SD-Android (it keeps the SD powered on all the time the android is 'online' even when in idle),
so it consume too much power for daily use. That's my point.
Best Regards, FLeX!
Edit: The headphones are working too(cable 3.5mm) :O , great!
Gr8 speed... but i dont have on-screen keyboard,some times the notification led is still on
I will post more results later
Sorry for bad english
mcmaus said:
Gr8 speed... but i dont have on-screen keyboard,some times the notification led is still on
I will post more results later
Sorry for bad english
Click to expand...
Click to collapse
The missing on-screen keyboard is a known issue. Actualy it's not completely missing i can press b, n, v, etc.
The LED is on when you start haret with plugged charger.
nasko_spasko said:
The missing on-screen keyboard is a known issue. Actualy it's not completely missing i can press b, n, v, etc.
The LED is on when you start haret with plugged charger.
Click to expand...
Click to collapse
I have this build in everyday use, just get better keyboard from market and use that..
nasko_spasko said:
it is laggy but i can feel the speed!
)
Click to expand...
Click to collapse
that's a great quote - I know what you mean - but it just reads funny
Lothaen said:
that's a great quote - I know what you mean - but it just reads funny
Click to expand...
Click to collapse
Yeah... "By the power of Grayskull...I have the power!"
XD
Yep, but notice that my english is not excellent
Cheers!
Hi, guys!
Did you tested the Gallery3DFroyo ??
I did! It runs great, in 2.2 & 2.1 its very, very slow...
on that 2.3 it flies!!
Take a look at my video on youtube!
Edit: If somebody wants to test it, download the attached file..
any of you tried the camera with "lib_camera" ?
For my the camers starts but with no image,only settings.After changing resolution it fails.
Sorry for bad English.
mcmaus said:
any of you tried the camera with "lib_camera" ?
For my the camers starts but with no image,only settings.After changing resolution it fails.
Sorry for bad English.
Click to expand...
Click to collapse
Same with me, bro!
Maybe the libs should be rewrited for the Gingerbread..
btw that is the best android I've ever used on my machine
Same for my
But i have problem when the display dims...and i can't wake up the phone from stand by Power button,volume up/down etc didn't respond
EDIT:Angry Birds Valentine working,lag like hell,but no problem for me....
Sorry for bad english.
mcmaus said:
Same for my
But i have problem when the display dims...and i can't wake up the phone from stand by Power button,volume up/down etc didn't respond
EDIT:Angry Birds Valentine working,lag like hell,but no problem for me....
Sorry for bad english.
Click to expand...
Click to collapse
Try with another rootfs(for the wakeup problem), backup and delete data.img, if
you can't see changes
and always use the latest kernel and rootfs.
I have no any problems, excepting the known issues, and bug-s.
rootfs
Kernel+Drivers (modules)
Guys could you please tell me how can I get Gingerbread into my Blackstone? I'm a bit lame in this way, or just send me some link so I can follow steps there.
Hi Trexi,
Try this .
http://rapidshare.com/files/449355677/Gingerbread_Test.rar
Best Reg..
leonore said:
Hi Trexi,
Try this .
http://rapidshare.com/files/449014742/Gingerbread_Test.rar
Best Reg..
Click to expand...
Click to collapse
Thank you leonore, but I have some troubles with it.. I chose Blackstone startup config but haret booted WM again. :/
Don't you know guys what to do with this please? Have Kingston class 2 microSD.
**edit : Older Haret helped me. This version looks really great, thank you once more leonore!
Trexi said:
Guys could you please tell me how can I get Gingerbread into my Blackstone? I'm a bit lame in this way, or just send me some link so I can follow steps there.
Click to expand...
Click to collapse
Hi, I'll give you a simple HOWTO :
1. Download this.
2. Extract the contents of the archive to the root of your FRESH FAT32
formatted microSD, excepting the system.ext2
(if it's SDHC(larger than 2-4GB), microSD shouldn't be class 6 and higher)
3. Download this.
4. Extract the system.ext2 to the root of the microSD
5. Run HaRET.exe and have fun!!
Edit: if the andro does not boot successfully, try to use the latest modules and rootfs
if you don't know how to do it, just--\/
If you have any specific problems, PM me!
Best regards, FLeX!
Hi guys,
I have rooted xperia m 15.4.A.0.23 with unlocked bootloader. How to swap internal memory with external sdcard (32GB)? I have tried all methods that I found, but nothing worked...
josh4vi said:
Hi guys,
I have rooted xperia m 15.4.A.0.23 with unlocked bootloader. How to swap internal memory with external sdcard (32GB)? I have tried all methods that I found, but nothing worked...
Click to expand...
Click to collapse
sorry...
i'm forgot about this..
i have some tutorial with using some cm11 script...
and working perfect for me...
11extsd2internalsd doesn't work
echo juned said:
sorry...
i'm forgot about this..
i have some tutorial with using some cm11 script...
and working perfect for me...
Click to expand...
Click to collapse
I tried to use 11extsd2internalsd file with unit.d but I think I'm doing something wrong or it doesn't work for me. Sdcard0 folder is empty and and size of it is 2GB. My sdcard(32GB) is still under sdcard1 folder. I can't attach any screenshots because when I'm trying to take one it says that screenshot cannot be taken. I think it's because of this failed swap, because when I turn of init.d screenshots are working.
First of all, I am speaking from first hand experience. Second, DON'T SWAP THE MEMORIES. I have barely lived through 3 weeks of swapped memory and it. is. horrible. There is way too much lag that remains even after reversing the switch. For example, when pushing the notification bar it really lags. Also, when you wake up your phone after it has gone to sleep, it will have to read memory and it will lag a lot. Just use foldermount or link2sd. Sure, bothering to link is really bad, but having a stutter-less phone is way better.
Trppmdm said:
First of all, I am speaking from first hand experience. Second, DON'T SWAP THE MEMORIES. I have barely lived through 3 weeks of swapped memory and it. is. horrible. There is way too much lag that remains even after reversing the switch. For example, when pushing the notification bar it really lags. Also, when you wake up your phone after it has gone to sleep, it will have to read memory and it will lag a lot. Just use foldermount or link2sd. Sure, bothering to link is really bad, but having a stutter-less phone is way better.
Click to expand...
Click to collapse
What SD did you use? My Class 10 worked fine
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
10
Antrikos48 said:
What SD did you use? My Class 10 worked fine
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Click to expand...
Click to collapse
I've got class 10 too, but it doesn't work. internal sdcard0 and external sdcard1 are still in the same places. Maybe I'm doing something wrong...
josh4vi said:
I've got class 10 too, but it doesn't work. internal sdcard0 and external sdcard1 are still in the same places. Maybe I'm doing something wrong...
Click to expand...
Click to collapse
From what I see, you're running 4.3 on your phone. I honestly never did it on 4.3. Perhaps, it's beacuse you're not doing this by this method? That one worked for me, the terminal emulator method just sucks(1 typo and you're dead).
If you ARE doing it by that method, then probably it is because the apps aren't updated for this firmware?
I have a stock lollipop from and idk if it is worth switching over to CM13. I have a D850 so there are a couple unofficial builds. Why should I switch over to CM13 to M compared to my 5.1 rom?
If you like your camera software,menu and other accesibility items you should go for a cusyom rom based on official L...you can search for Cloudy g3 or trix which is a forward for the Cloudy G3
Sent from my LG-H815 using Tapatalk
Im using Cloudy. I like stable, batterym customization
FawkiDied said:
I have a stock lollipop from and idk if it is worth switching over to CM13. I have a D850 so there are a couple unofficial builds. Why should I switch over to CM13 to M compared to my 5.1 rom?
Click to expand...
Click to collapse
IMHO...CM13 sucks compared to standar L.
Matt
matthew33 said:
IMHO...CM13 sucks compared to standar L.
Matt
Click to expand...
Click to collapse
Can you tell me why?
matthew33 said:
IMHO...CM13 sucks compared to standar L.
Matt
Click to expand...
Click to collapse
I tried xenon HD and it flew compared to anything I had on this phone. But there are bugs and the camera sucks on any aosp roms
this question has been asked countless times on this forum already, i'll just summarise the main few points for you here. i'm using candysix so i can only comment for that since i've heard cm13 has many bugs and SOD's.
advantages of stock over cm13:
1. Camera - g3 needs lg framework to record 4k videos, so AOSP roms like cm cannot shoot 4k. Normal camera quality is also nowhere near stock quality, although you can flash camera mods to improve the quality (i'm using one m9 camera mod)
2. You don't break your warranty (if you still have one)
3. There are minimal bugs and crashes compared to AOSP
4. Can use LG apps like Miracast, Qslide apps, QuickRemote
advantages of cm13 roms over stock:
1. Much, much smoother UI. almost lag free
2. Battery life is about the same as stock or even better for me
3. No lg bloatware
4. Stock android experience
5. It's Marshmallow!
tietganFTW said:
this question has been asked countless times on this forum already, i'll just summarise the main few points for you here. i'm using candysix so i can only comment for that since i've heard cm13 has many bugs and SOD's.
advantages of stock over cm13:
1. Camera - g3 needs lg framework to record 4k videos, so AOSP roms like cm cannot shoot 4k. Normal camera quality is also nowhere near stock quality, although you can flash camera mods to improve the quality (i'm using one m9 camera!
Click to expand...
Click to collapse
that's where you're wrong. With the m9 camera if you have the patch you can shoot 4k video.
So should I switch over? Or not? Im still wondering. I have a neat stock rom. I dont shoot videos if at allbut I liek battery life, and I do use the camera for photos decetnly often not to much.
Wj287 said:
that's where you're wrong. With the m9 camera if you have the patch you can shoot 4k video.
Click to expand...
Click to collapse
i can't seem to find the option in the camera app, the highest quality for me is FHD 1080p
Switch... Cm13 is awesome.
1. Google now on TAP is awesome.
2. Smooth, very smooth.
3. Makes me feel up to date hahaha.
4. You can install themes... Cool thing to do.
tietganFTW said:
i can't seem to find the option in the camera app, the highest quality for me is FHD 1080p
Click to expand...
Click to collapse
That's because you don't have the 4k patch
just use open camera it has 4k video and everything you need cm13 has been epic fast and stable with no issues and battery last about 17 hours each day when setup right only issue is SD card corruption
Wardoctor said:
just use open camera it has 4k video and everything you need cm13 has been epic fast and stable with no issues and battery last about 17 hours each day when setup right only issue is SD card corruption
Click to expand...
Click to collapse
Sd card is working for me on cm13. Just need to set it as external storage and not as internal
my SD is set as external still won't work right it's a 512gb mini SD card
S.AMU said:
Sd card is working for me on cm13. Just need to set it as external storage and not as internal
Click to expand...
Click to collapse
Wardoctor said:
my SD is set as external still won't work right it's a 512gb mini SD card
Click to expand...
Click to collapse
What? 512 gb?????
yup it has no issues with tx-i rom and holds music very well
S.AMU said:
What? 512 gb?????
Click to expand...
Click to collapse
Wardoctor said:
just use open camera it has 4k video and everything you need cm13 has been epic fast and stable with no issues and battery last about 17 hours each day when setup right only issue is SD card corruption
Click to expand...
Click to collapse
The m9 camera is better
ask the opencamera dev to add the m9 features
Wj287 said:
The m9 camera is better
Click to expand...
Click to collapse
Wardoctor said:
yup it has no issues with tx-i rom and holds music very well
Click to expand...
Click to collapse
Are you sure you got a real 512gb card?? Because SanDisk only reaches 200gb and the only company who says are able to make 512gb is Microdia. But for now this 512gb card is not for sale. It's only a prototype presented in june this year. (see this)
Is there any working app that helps to use external memory as a internal memory?
i have tried to searched and installed some apps also but they didn't worked so i removed them!
I am have Asus Zenfone 5 (t00j 8gb) cell and i hardly have 1 gb!
i tried to search in xposed installer but all of them were last updated in 2014 and it says it is only for kitkat.
If there any thread regarding this and that works for my cell so please leave the link below.
Thanks for reading it!
Oar_lord69 said:
Is there any working app that helps to use external memory as a internal memory?
i have tried to searched and installed some apps also but they didn't worked so i removed them!
I am have Asus Zenfone 5 (t00j 8gb) cell and i hardly have 1 gb!
i tried to search in xposed installer but all of them were last updated in 2014 and it says it is only for kitkat.
If there any thread regarding this and that works for my cell so please leave the link below.
Thanks for reading it!
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenfone-5/general/questions-section-t3345581
Oar_lord69 said:
Is there any working app that helps to use external memory as a internal memory?
i have tried to searched and installed some apps also but they didn't worked so i removed them!
I am have Asus Zenfone 5 (t00j 8gb) cell and i hardly have 1 gb!
i tried to search in xposed installer but all of them were last updated in 2014 and it says it is only for kitkat.
If there any thread regarding this and that works for my cell so please leave the link below.
Thanks for reading it!
Click to expand...
Click to collapse
try google and search "link2sd"
paktepu said:
http://forum.xda-developers.com/zenfone-5/general/questions-section-t3345581
Click to expand...
Click to collapse
as for the question, if you use xposed framework you can use XinternalSD, if not you can use other link2sd solutions, the "real solution" would come from a kernel "developer" who manage to swap internal and external paths in kernel(as this is the only way to really invert memories since kitkat came out.)
kihope12 said:
try google and search "link2sd"
Click to expand...
Click to collapse
Do it will work for my asus zenfone 5?
Thank u for the reply
guidoido004 said:
did people already told you that you're an asshole? couldnt you just make a joke and answer him?
as for the question, if you use xposed framework you can use XinternalSD, if not you can use other link2sd solutions, the "real solution" would come from a kernel "developer" who manage to swap internal and external paths in kernel(as this is the only way to really invert memories since kitkat came out.)
Click to expand...
Click to collapse
thanks i will give it a try thank you for the reply!
Oar_lord69 said:
thanks i will give it a try thank you for the reply!
Click to expand...
Click to collapse
feel free to ask me if you need anything, but i dont garantee i will answer in the same day. lol.
also, check for asus zenfone 5 india group on facebook, usually people are quicker and more comprehensive in there, the right one has around 34k people on it.
Oar_lord69 said:
Do it will work for my asus zenfone 5?
Thank u for the reply
Click to expand...
Click to collapse
it will work on all devices i think
guidoido004 said:
feel free to ask me if you need anything, but i dont garantee i will answer in the same day. lol.
also, check for asus zenfone 5 india group on facebook, usually people are quicker and more comprehensive in there, the right one has around 34k people on it.
Click to expand...
Click to collapse
already joined their!
Do u have made or their is any video on how to make external memory to internal memory? without losing the data of external memory?
guidoido004 said:
feel free to ask me if you need anything, but i dont garantee i will answer in the same day. lol.
also, check for asus zenfone 5 india group on facebook, usually people are quicker and more comprehensive in there, the right one has around 34k people on it.
Click to expand...
Click to collapse
already joined their!
Do u have made or their is any video on how to make external memory to internal memory? without losing the data of external memory?
Oar_lord69 said:
already joined their!
Do u have made or their is any video on how to make external memory to internal memory? without losing the data of external memory?
Click to expand...
Click to collapse
theres no video i know of, but's pretty simple, with xposed you use XInternalSD which link all app data on "internal sdcard" on the external one, then you just have to move things in there(as i used with all apps, not just some, i moved the android folder from one to other), the rest can be moved even without root to a external sdcard, musics, pictures, that kind of stuff.
If im not mistaken, without exposed framework, theres an Mod here on XDA that support all devices, but i dont know the link of it, you'll need to find on Android Forum(dont know if its on development, apps and games or general)...
you wont lose any data in any of these processess, the only one you would was if you really swapped them.
I know what you are asking for, but in a simple answer, theres no solution for it, the workaround in link2sd with or without xposed modules...
Hello,
3 days ago I received CHUWI vi10 plus tablet with REMIX 2.0. OS. The problem is that the system is freezing like every 5-10 if I´m doing anything (its necessary to reset it with long pressing the power button). In developer options I changed GPU rendering to enable and it seems that it a helped a bit but freezes still persists.. Does somebody here have similar experience or some tip to repair it? I have noticed that Chris in his review mentioned a similar problem… but according to his words it dissapeared. Its extremely annoying.
Factory reset is not helping.
I have the same problem. Trying to get in touch with someone from Jide or Chuwi but not having much luck. think I have a $180 paperweight.
Any chance both of you have microSD card inserted in? If yes, remove the card and see if this helps with alleviating the freezing problem (I know it sounds weird).
potatohead said:
Any chance both of you have microSD card inserted in? If yes, remove the card and see if this helps with alleviating the freezing problem (I know it sounds weird).
Click to expand...
Click to collapse
I don't have a microSD card inserted
Hi,
A guy from the Chuwi Forum found out that enabling GFX in the Bios solves the freezing issue. This works well for me, too.
fliege91 said:
Hi,
A guy from the Chuwi Forum found out that enabling GFX in the Bios solves the freezing issue. This works well for me, too.
Click to expand...
Click to collapse
Hi! Did you figure out how to connect a keyboard to boot into BIOS?
You can connect a USB keyboard via an OTG adapter. I have the keyboard cover so there was no need to attach an external one.
yjpecht said:
Hi! Did you figure out how to connect a keyboard to boot into BIOS?
Click to expand...
Click to collapse
Thanks!
Got mine yesterday. Wondering if there's a way to root it and flash Viper. After just 1 day of use I didn't face any freeze yet. But I did a F.R before starting to use it.
fliege91 said:
Hi,
A guy from the Chuwi Forum found out that enabling GFX in the Bios solves the freezing issue. This works well for me, too.
Click to expand...
Click to collapse
I did this and I'm still getting freezing. Really annoying.
I got the same issues as well. Freezing
This freezing issue is really really irritating. Tried enabling gfx but doesn't help either. Even when installing an app from the play store. Hope guys at Chuwi are conscious about this because this tablet got a real potential.
I am having the same issues, even with the suggestion in this thread. Yellowflash is correct, has real potential. But if it is freezing non stop its really a huge waste of time and money...
nobodypanic said:
I am having the same issues, even with the suggestion in this thread. Yellowflash is correct, has real potential. But if it is freezing non stop its really a huge waste of time and money...
Click to expand...
Click to collapse
Do you use a Micro SD card? If yes, I suggest that you try to remove it, just in case...
Tony crousty said:
Do you use a Micro SD card? If yes, I suggest that you try to remove it, just in case...
Click to expand...
Click to collapse
Thanks Tony, that is something I did try as well. It seems to be crashing/freezing the same with our without a Micro SD card present.
Chuwi need to address at least patches to fix these freezing asap. Because imo Remix only should be a pleasant experience on this tablet and not horrible!
This tablet is and will be the last Chinese tablet I'll ever buy.
Try this:
Settings --> Experimental Features--> Enable Launcher file mode.
This was the fix for me. On the down side you'll get kind of a Windows Desktop.
Hi guys I just found out that there's CM13 build for a bunch of Chuwi tablet including the vi10 plus
http://www.modaco.com/forums/topic/...huwi-vi10-plus-hi10-plus-hi10-pro-hibook-pro/
---------- Post added at 10:00 AM ---------- Previous post was at 09:58 AM ----------
some0ne86 said:
Try this:
Settings --> Experimental Features--> Enable Launcher file mode.
This was the fix for me. On the down side you'll get kind of a Windows Desktop.
Click to expand...
Click to collapse
Tried it but didn't fix at all
Fix for 'freezing issue' & 'keyboard dock wake issue' for stock Remix OS and stock Android is now available.
http://konstakang.com/devices/chuwi_vi10plus/stock-fix-freeze-kbwake
Also released patches for these issues for my CM12.1 build earlier.
http://konstakang.com/devices/chuwi_vi10plus/CM12.1
KonstaT said:
Fix for 'freezing issue' & 'keyboard dock wake issue' for stock Remix OS and stock Android is now available.
http://www.modaco.com/forums/topic/...ock-wake-issue-for-chuwi-vi10-plus-hi10-plus/
Also released patches for these issues for my CM12.1 build earlier.
http://www.modaco.com/forums/topic/...vi10-plus-hi10-plus-hi10-pro-hibook-pro-hi12/
Click to expand...
Click to collapse
Flashed it but no wifi, no sound, no camera is working. Remix OS