I was on 2.3.3 now I'm down graded just for root there must be a way around this ? it's said in the forum that I can be rooted on a 2.3.3 what am I missing here ?
Unlocked bootloader or not?
You would need to flash a rooted 2.3.3 onto your phone, if that's what you wanted to do.
With a locked bootloader, the fastest would be to flash a 2.3.2, root with gingerbreak and then OTA upgrade to 2.3.3
Sent from my X10i using Tapatalk
ok well I did flash it so I could root it
and the up date was new to me and I was loving the fast boot time I updated it just before I rooted it but then realized I could root my phone on my own So I went forth with it
so are you telling me I can have both Rooted and up to date I've been at this for so long now damn
Unlocked bootloader or not?
locked I believe .
So what you saying is I need to flash a 2.3.3 rooted gingerbread onto my phone where ever that may exist ?
Ques – Oooops. Does this mean that I can’t be rooted on 2.3.3?
Of course you should be rooted on 2.3.3. That’s what the updates are meant for. For all of you now who are rooted on 2.3.2, follow these steps –
1. Connect to a wifi connection (You know how to do that, don’t you).
2. Go to ‘settings’, ‘About phone’ and tap ‘Software update’. Tap ‘Update now’.
3. Follow the onscreen instructions (just a button tap and you are done) to update your phone to 2.3.3.
4. The phone should now be running a rooted 2.3.3.
the above
Does not work if you want to update your phone ! I also need proper apn settings for Fido 3 G now
If you have a locked bootloader, as clearly stated above:
Flash 2.3.2, gingerbreak it to get root, do an OTA update to 2.3.3.
My guess is that I can't update with out authentic firmware the update downloads fine but at the end it doesn't update just says unabled to update .
Well then your doing something wrong. As they said, you flash back to generic world 2.3.2.. You dont need an ''authentic'' firmware, world means that it was the same firmware used on every device. I have done this, had no problem updating afterwords.
Remember to get backup on your apps, contacts and messages.
Then flash back to .181 and root it and then OTA.
If you cant use wireless then you have done something wrong or restored some settings that crashes with the current settings
So should I re flash it with the LT15i_3.0.A.2.181_ Generic world 1 root it and then up date it ?
Success ! I don't know what went wrong the first time but it's all good now thanks for all your help I couldn't find any one to pay to do it in my area so I had to do it my self and I don't know how to use a computer .
Related
I've been researching rooting for a while now but I still don't quite get what the consequences, requirements and benefits are of rooting, flashing etc. The wiki seems to be rather out of date, and doesn't even have an arc section.
What I want is:
1.To stop all the crappy software rogers and sony have forced on there, constantly autostarting themselves(Hotshots golf, setup guide, liveware manager, mobile backup, storefront, postcard, even maps likes to run on its own)
2. Swype
What I am concerned of is:
1. Do I have to erase everything on my phone to root?
2. Would I lose any of the default functionality of the arc?
3. What would I require to do this modification?
4. Can I reverse this process and go back to factory settings?
5. Would I be able to update later on?
and most of all, 6. Would it actually allow me to do what I want as stated above?
I've got an LT15a running 2.3.3 on Rogers with no attempted modifications.
bunktacular said:
I've been researching rooting for a while now but I still don't quite get what the consequences, requirements and benefits are of rooting, flashing etc. The wiki seems to be rather out of date, and doesn't even have an arc section.
What I want is:
1.To stop all the crappy software rogers and sony have forced on there, constantly autostarting themselves(Hotshots golf, setup guide, liveware manager, mobile backup, storefront, postcard, even maps likes to run on its own)
2. Swype
What I am concerned of is:
1. Do I have to erase everything on my phone to root?
2. Would I lose any of the default functionality of the arc?
3. What would I require to do this modification?
4. Can I reverse this process and go back to factory settings?
5. Would I be able to update later on?
and most of all, 6. Would it actually allow me to do what I want as stated above?
I've got an LT15a running 2.3.3 on Rogers with no attempted modifications.
Click to expand...
Click to collapse
1. Nope at all, if you have unlocked bootloader and flash prerooted kernel correlate to your firmware
2. Nope, the phone still remains intact after rooting, just add superuser to your phone
3. Just need your phone rooted and do exactly as the thread owner said, ur gonna be fine.
4. Yes, all you need is flash back to your stock rom
5. Yes, absolutely possible
6. Yes again, once you have root permission (superuser), you can delete those craps and use Swype.
*just a side note,
you can root your phone without unlocking your bootloader but yeah, that would mean loosing your data completely
@Babygau
Alright, thank you very much.
On a follow up then, can you point me towards the best method of rooting an arc, bearing in mind that Rogers has disabled Sony's bootloader?
And also where I would be able to get Swype? Swype's site is pointless and google just brought up people talking about using it, not how to get it.
@cryogenix
Yeah, thats what I was afraid of :/
Rogers disabled the arcs bootloader, I'm trying to figure out what I can do and hopefully not erase my data.
So long as I can achieve the 2 objectives at the top, I'd be happy though.
You'll lose the ability for ota updates when you delete system files. That's the only bad thing at your plan.
Rooting alone won't remove any abilitys.
Sent from my LT15i using XDA Premium App
@bunktacular
You would need to flash a 2.3.2 ROM onto your phone (Ignore this if you are on 2.3.2). Rooting is as simple as installing Gingerbreak and running it (Gingerbreak doesn't work on 2.3.3 and hence the need to downgrade to 2.3.2). Then do an OTA (Over The Air) update to 2.3.3 to retain root.
I suggest you wipe user data. Make a backup if need be.
Also, get the latest Swype 3.0 beta from here.
Once you have your rooted 2.3.3, install Titanium Backup. It will allow you to remove all the Rogers and SE bloatware. No, you won't lose the functionality of the arc. You stand to gain with rooting not vice-versa.
The only caveat is that once you remove system apps as Flo95 pointed out is that the next time you want to update your phone, you'd have to resort to SEUS instead of an OTA update.
[With the latest update from SE (i.e. the update from August 1, 2011), I'm not sure about root status.]
xtacy! said:
@bunktacular
You would need to flash a 2.3.2 ROM onto your phone (Ignore this if you are on 2.3.2). Rooting is as simple as installing Gingerbreak and running it (Gingerbreak doesn't work on 2.3.3 and hence the need to downgrade to 2.3.2). Then do an OTA (Over The Air) update to 2.3.3 to retain root.
I suggest you wipe user data. Make a backup if need be.
Also, get the latest Swype 3.0 beta from here.
Once you have your rooted 2.3.3, install Titanium Backup. It will allow you to remove all the Rogers and SE bloatware. No, you won't lose the functionality of the arc. You stand to gain with rooting not vice-versa.
The only caveat is that once you remove system apps as Flo95 pointed out is that the next time you want to update your phone, you'd have to resort to SEUS instead of an OTA update.
[With the latest update from SE (i.e. the update from August 1, 2011), I'm not sure about root status.]
Click to expand...
Click to collapse
the other easier way is go to this website: http://www.wotanserver.com
create a free account, download their client software, and they will do the rest for you
droidlessons.com/what-is-rooting-on-android-the-advantages-and-disadvantages
Rooting v2.3.2, posted May 15th, 2011:
Updating over-the-air to v2.3.3 and keeping root, posted June 22nd, 2011:
Swype doesn't require root. It's just a regular application install.
Alright then, it seems what I really need is to flash 2.3.2 then, at least until gingerbreak works for 2.3.3.
What's the best method for me to do this?
EDIT:
I have found a fairly detailed guide on doing so, let's see how this goes.
Flashing: http://forum.xda-developers.com/showthread.php?t=1088539
Sucess! Aside from mybackup completely messing up my contacts, everything went smoothly.
if u already have your bootloader unlocked, just flash lastest firmware including prerooted kernel
if not, using gingerbreak
bunktacular said:
Alright then, it seems what I really need is to flash 2.3.2 then, at least until gingerbreak works for 2.3.3.
Click to expand...
Click to collapse
I doubt Gingerbreak will patch 2.3.3.
The issue is that the exploits in 2.3.2, 2.3.3 were patched in 2.3.4 by Google and because Sony's version of 2.3.3 was released after 2.3.4 was released, those security fixes from 2.3.4 were backported into Sony's version of 2.3.3.
bunktacular said:
EDIT:
I have found a fairly detailed guide on doing so, let's see how this goes.
Flashing: http://forum.xda-developers.com/showthread.php?t=1088539
Sucess! Aside from mybackup completely messing up my contacts, everything went smoothly.
Click to expand...
Click to collapse
Backup & Restore from v2.1 is compatible with v2.3.x.
http://forum.xda-developers.com/showthread.php?t=1196908
babygau said:
if u already have your bootloader unlocked, just flash lastest firmware including prerooted kernel
if not, using gingerbreak
Click to expand...
Click to collapse
He's got a Rogers branded arc branded arc. Therefore, he can't unlock the bootloader (yet).
hi i just rooted and installed a custom theme from uot theme kitchen and noticed there was an update (current installed version is 2.3.2) and was wondering if i accepted it, would i lose root, and more importantly would i mess up my phone because i have a custom theme?
Last time I checked the 2.3.3 Update is not available for VZW, unless you are talking about a different update. Please keep me posted as well.
Delons said:
Last time I checked the 2.3.3 Update is not available for VZW, unless you are talking about a different update. Please keep me posted as well.
Click to expand...
Click to collapse
well acording to my phone there is an update available (could be a new kernel) but shortly after recieving the notification for the 10th time i bought titanium backup pro (best 7 bucks ever spent on my phone by the way) i put "updateinstaller" in a bloat freezer and it hasn't bugged me since
so any idea if it'll mess up my phone?
If you update to 2.3.3 and your are rooted it will brick your phone for sure happened to me a couple days ago. If you want the update you would need to unroot and then get update and re root but I'm not worried about updating I'm a fan of my phone now so I won't be doing it any time soon maybe once ICS is out and there's a root method out.
unrooting or relocking
pouxonu said:
If you update to 2.3.3 and your are rooted it will brick your phone for sure happened to me a couple days ago. If you want the update you would need to unroot and then get update and re root but I'm not worried about updating I'm a fan of my phone now so I won't be doing it any time soon maybe once ICS is out and there's a root method out.
Click to expand...
Click to collapse
In what I have experienced, the phone bricks after unrooting and installing the update. I was wondering do I need to relock the bootloader. Unrooting alone still produces a paper weight.
Update: Locking the BL and updating worked. 2.3.3 working well unrooted. Seems the problem was with the flashtool.
I just updated and all I had to do was relock bootloader, it will wipe root by itself and when the update is done just unlock and reroot with same methods
Hi,
Can someone please write a noob's guide to rooting the AT&T xperia play (r800at)? The phone is carrier locked and bootloader locked. Is there a easy way to just get root permissions on the stock AT&T rom (2.3.3) without unlocking bootloader? All I want to do is remove AT&T apps which I don't use and free up internal memory (I only have 40 mb left). I couldn't find a thread which clearly explains this (have been searching for more than a week now).
PS: This is my first android phone, so I don't have a very good idea about how all this works.
Thanks.
turbo789 said:
Hi,
Can someone please write a noob's guide to rooting the AT&T xperia play (r800at)? The phone is carrier locked and bootloader locked. Is there a easy way to just get root permissions on the stock AT&T rom (2.3.3) without unlocking bootloader? All I want to do is remove AT&T apps which I don't use and free up internal memory (I only have 40 mb left). I couldn't find a thread which clearly explains this (have been searching for more than a week now).
PS: This is my first android phone, so I don't have a very good idea about how all this works.
Thanks.
Click to expand...
Click to collapse
You are basically in the same place i was in a few weeks ago.
First off let me link you this this thread
(http://forum.xda-developers.com/showthread.php?t=1270295)
You'll find there that you cannot currently root the r800at without first unlocking the bootloader!
The bad news is that unlocking the bootloader is the the most difficult part
here is the bootloader unlock guide by Alejandrissimo.
(http://forum.xda-developers.com/showthread.php?t=1232050)
Its a pain in the butt on this particular phone so i highly recommend you have Alejandrissimo remote support you. Be prepared to pay 24 bucks for the unlock since the software requires it either way.
If you have Alejandrissimo help you he will also install the CWM recovery for you.
THIS is important as it installs a custom recovery mode for your phone that you will use to backup your phone, install kernels, and ROOT your phone.
If you are going the DIY route here is the Clockwork Recovery thread
(http://forum.xda-developers.com/showthread.php?t=1130639)
I hope this helps. After all the hard stuff is done the rest is pretty easy. Learning how to put your phone into recovery is important into jumping into all the other great things you can do with your phone.
The first like has an excellent post by xSoNiCcRaCkErSx who has basically tested many of the custom rom/kernel combinations on the r800at!
I hope this helps you and all the other r800at users out there!
Thanks DrROBschiz
From what I have read, [unlocking bootloader + applying clockwork recovery patch + Over-the-air updates] can brick the xperia play. Is this true? Have you tried OTA updates?
Also, I found another method (but I am not sure if it works with r800at). You flash 2.3.2 firmware using tools from wotanserver (cannot paste link because I am a new user). Then use gingerbreak to obtain root (this should work because of downgrading to 2.3.2) and update with OTA to get the latest version of android (claimed to retain root on the latest version). This method also doesn't seem to need unlocked bootloader.
Has someone with AT&T xperia play (r800at) tried the second method?
Also curious, can you unlock the bootloader via the process from Sony on their official site (which I cant link to right now)? Is there a downside outside of not having help (which don't get me wrong may be needed)
@8-Bit: You cannot unlock bootloader following Sony's website if you have carrier locked phone (r800at is locked to AT&T US). When I tried that, I realized that carried locked phones are not 'fastboot' enabled. Also, sim unlocking the phone using 'unlock codes' won't enable 'fastboot'. It will just make the phone capable of accepting other networks sim cards.
Also yes its important to note that if your bootloader is unlocked OTA will brick the phone.
MAKE A BACKUP!
I understand not wanting to deal with the complicated process of the current unlock method but it really is the only viable option for the AT&T version of the Play unfortunately.
I finally have root!!!
turbo789 said:
Thanks DrROBschiz
From what I have read, [unlocking bootloader + applying clockwork recovery patch + Over-the-air updates] can brick the xperia play. Is this true? Have you tried OTA updates?
Also, I found another method (but I am not sure if it works with r800at). You flash 2.3.2 firmware using tools from wotanserver (cannot paste link because I am a new user). Then use gingerbreak to obtain root (this should work because of downgrading to 2.3.2) and update with OTA to get the latest version of android (claimed to retain root on the latest version). This method also doesn't seem to need unlocked bootloader.
Has someone with AT&T xperia play (r800at) tried the second method?
Click to expand...
Click to collapse
I tried the second method. It works. But you do loose the AT&T branding (phone will be identified as r800a/r800i based on which ROM you flash). Also, when connected to mobile data it says "H" instead of "H+", though I didn't notice any difference in data speeds.
@8-Bit: if you need any details, I would be glad to help.
I just did this today. Started with stock 2.3.3 on an r800at. I used Wotanserver ( which is currently free for some reason) to flash to 2.32 as an r800a model. Then I installed gingerbreak. I now have root including wireless hotspot!
The only gotcha was I needed to load gingerbreak via my pc, a direct API download from the web would not work.
My speeds are fine as verified on speed test.org and I was able to get back to 2.3.3. Over the air.
Phone is much faster and has much more memory due to the Att bloatware being gone.
Give it a try!
Will doing this enable fastboot so you can unlock the bootloader and install custom roms?
Sent from my R800at using XDA App
tgh0wnz said:
Will doing this enable fastboot so you can unlock the bootloader and install custom roms?
Sent from my R800at using XDA App
Click to expand...
Click to collapse
Were you talking about the Wotanserver method? I'm not sure how it works it's magic. I think the boot loader probably was unlocked to ge the firmware on but then re locked. At least I hope so because my hope is to get thE 2.3.4 OTA update on somehow
I believe the att, and firmware update supports 4g, hence when you flash it to generic you lose that... But it's speed difference between really fast and really faster.. So it's not even noticeable. Personally I believe it's better if the phone is rooted and bloats removed.
Sent from my XPlay using XDA App.
Ok guys I told a friend I'd help him get rooted. And ive been reading here and im lost.. From what I gather. The bootloader on the att version is locked and to gain root. That needs to be unlocked.. This is where I'm lost. Why is the best method to go through someone else. What does that involve? Sorry to sound dumb I'm just really lost here. haha.
Sent from AT&T Galaxy S2
turbo789 said:
Thanks DrROBschiz
From what I have read, [unlocking bootloader + applying clockwork recovery patch + Over-the-air updates] can brick the xperia play. Is this true? Have you tried OTA updates?
Also, I found another method (but I am not sure if it works with r800at). You flash 2.3.2 firmware using tools from wotanserver (cannot paste link because I am a new user). Then use gingerbreak to obtain root (this should work because of downgrading to 2.3.2) and update with OTA to get the latest version of android (claimed to retain root on the latest version). This method also doesn't seem to need unlocked bootloader.
Has someone with AT&T xperia play (r800at) tried the second method?
Click to expand...
Click to collapse
It does work except you lose att bloatware which is a good thing
---------- Post added at 09:40 PM ---------- Previous post was at 09:27 PM ----------
joshyy_rey said:
Ok guys I told a friend I'd help him get rooted. And ive been reading here and im lost.. From what I gather. The bootloader on the att version is locked and to gain root. That needs to be unlocked.. This is where I'm lost. Why is the best method to go through someone else. What does that involve? Sorry to sound dumb I'm just really lost here. haha.
Sent from AT&T Galaxy S2
Click to expand...
Click to collapse
If you just want root then go to wontanserver and register and download driver and client software and follow their directions. Choose r800a 2.3.2 (3.0.A.2.184) . Now use gingerbreak1.2 (search forums) and follow direction. Now update over the air only. You have rooted 2.3.3 r800a enjoy
Okay, so I'm having problems with my phone randomly not getting a signal ever since doing this method... is there currently any way to go back to AT&T stock? Also, has anybody else been having signal issues? It says I have bars, but I can't call/text and I have to restart the phone. Very irritating.
turbo789 said:
Hi,
Can someone please write a noob's guide to rooting the AT&T xperia play (r800at)? The phone is carrier locked and bootloader locked. Is there a easy way to just get root permissions on the stock AT&T rom (2.3.3) without unlocking bootloader? All I want to do is remove AT&T apps which I don't use and free up internal memory (I only have 40 mb left). I couldn't find a thread which clearly explains this (have been searching for more than a week now).
PS: This is my first android phone, so I don't have a very good idea about how all this works.
Thanks.
Click to expand...
Click to collapse
Hi... first off all, sorry my bad english
If you have locked bootloader (SIM-locked) and want to root whitout unlocking bootloader, try this:
"Working Root on 2.3.3 locked bootloaders! (Works on all Xperia Plays except R800X)"
http://forum.xda-developers.com/showthread.php?t=1116090
Worked like a charm form me...
Portugal - TMN
Xperia Play R800i locked bootloader.
Gingerbreak worked very fast for me, BUT only after turning off Wifi connections and UN-plugging the USB-cable
Have froozen lots off app's (think is the correct term) with Titanium backup
Have used Link2SD to move other apps to SDcard
When I bouthg the phone it cames with 2.3.2. I made the mistake OTA upgrading before reading about root.
At beggining (2.3.2) the phone boot, from startup to PIN code, about 3-5 minutes.
After OTA upgrade (2.3.3) i noticed some diferences (about 2 minutes to boot)...
After rooting phone MAKES BOOT IN 45 SECONDS!!! (from begining to PIN CODE)
Always have about 250mb ram free
Internal storage 150mb free (Im still afraid of using Insecure ADB to move dalvik cache to SD)...
I read lots of pages on XDA forum to know about rooting and all the benefits&risk's involved, and root related tools, before rooting so advise all the others newbies like me, doing the same
Thanks to all make this possible (must thanks here because I dont have post permission in develoment area)...
Once again, thanks a lot...
shiftylock said:
Okay, so I'm having problems with my phone randomly not getting a signal ever since doing this method... is there currently any way to go back to AT&T stock? Also, has anybody else been having signal issues? It says I have bars, but I can't call/text and I have to restart the phone. Very irritating.
Click to expand...
Click to collapse
It might be a late reply, but it might still help some one. I had similar problems (mainly with data connectivity). I fixed it by adding APN profiles for AT&T under settings >> wireless & network setting >> Mobile networks >> Access Point Names. Let me know if you need the details of the APN profile.
guys im having the same problem, i got a friend who needs helps with his xperia play at&t, he wants to unlock the bootloader, and install a custom os, i was looking for the 1st option on the first page, but the link doesnt works anymore, any suggestion?
DrROBschiz said:
Also yes its important to note that if your bootloader is unlocked OTA will brick the phone.
MAKE A BACKUP!
I understand not wanting to deal with the complicated process of the current unlock method but it really is the only viable option for the AT&T version of the Play unfortunately.
Click to expand...
Click to collapse
hi bro. am new to xda new to android new to android modding.so please help. i recently purchased used xperia play r800at from ebay its carrier unlocked.now what i want to know: phone is carrier unlocked can you please say is my phones bootloader unlocked. how can i root it or just give me a link. please please pleaaaasseeee!!!! am super noob i dont even fully know what is bootloader kernel rom and suck thing i just need to overclock and free up some space. please help because i cant find answers online please ((
DrROBschiz said:
You'll find there that you cannot currently root the r800at without first unlocking the bootloader!
Click to expand...
Click to collapse
that isn't true. I was able to root phone without unlocking bootloader using superoneclick. do the search.
Rooting R800AT
legacygt777 said:
that isn't true. I was able to root phone without unlocking bootloader using superoneclick. do the search.
Click to expand...
Click to collapse
If he was anything like me, then he searched, searched, searched, and after that, searched some more. Superoneclick does not work for our phones. All the guides for xperia plays don't mention a damn thing about rolling back firmware from version 2.3.3 to 2.3.2 in order to root. I was loosing my mind trying to figure this out at the time; tried multiple PCs/multiple USB ports, thought maybe my syntax was wrong on the manual methods so I tried a couple of automated methods like superoneclick and DoomLord Root, when those didn't work I thought maybe the drivers weren't quite right so I investigated that issue for ages but couldn't find any more up to date ones than the ones I was using. I then tried messing with a few automated rooters right from my phone like z4root and Gingerbreak which didn't work either. Finally I found this thread(same one linked a couple of posts up) which did the trick (I have it saved in my favorites). It's not missing any steps and is accurate to the T. Worked for me the first time and didn't require any special hexes, voodoo, or rain dances.
I just checked and since that thread is so old, the links are now dead. I would post there, but I'm not allowed (developer's thread). Here are some links to the software needed:
Flashtool
Android 2.3.2 (.184 as referred to in that thread)
And finally Gingerbreak v1.2 - should download this from your phone and install to it's internal memory (not the SD card) prior to flashing
The other methods of rooting may have worked once downgraded to 2.3.2, but I just followed that guide and used Gingerbreak as it seemed the simplest way.
Hi guys I have another question and I am thinking I may be able to acheieve re-root by using unrevoked, but I am unsure.
My system:
Version -2.15
PRI -2.15
Software version 5053-651-1
System - 2.3.3
Kernel version - 2.6.35.10-g13578ee
The above is the current information on my phone which has an update available but I haven't performed that task yet. My question I know there is a new root for those which have upgraded to the new gingerbread, but if am correct I don't thing my replace phone has been upgraded yet with the above information listed. Since I knew I was getting a replacement phone i assumed the software info would show it as ver 2.16 which requires the new rooting method? Am I correct in this assumpstion? Also since my system hasn't been updated yet can I still use UNrevoked3 to re-root? I know it seems lenghtly but I was attempting to be clear as possible to get the best answer before I proceeded with either the rooting method or the update.
Only way is for you to root is to use revolutionary.io only way for gingerbread
Should I update my phone before I root then?
Hey,
Yeah you will need to use revolutionary, but dont worry just google it you will get youtube videos walking you how to do it.
No do not update your phone, updates can always patch things and make rooting impossible (Sadface), just jump right in follow the instructions and you will be rooted and flashing roms in no time! just one piece of advice when you are rooted NEVER EVER accept an OTA update otherwise you might just kill your root, or worse D:!
Goodluck my friend! if you need anything just pm me!
Stevo
RamesisX said:
Should I update my phone before I root then?
Click to expand...
Click to collapse
You could root then just flash the latest stock rooted rom. Its up to you really I would just root now instead of updating
Yes I too learned that you must root first, a few months ago i accepted the Gingerbread update - mistake. Oh well, now im rooted using revolutionary.io
It was so easy, literally a few settings in the phone, install the driver, start rev.io, plug in your phone, type in your license key, done. reboot and ROM that *****
Happy ROMming
Greetings XDA,
Ive recently got me a GN (yakju) (couldn't wait for N4) and wait to get updated to 4.2. Now i run 4.2 and i want to unlock its boot loader & root it.
Not yet interested of having new roms on it, im cool with its stock android BUT i need to get full control of my device and not being restricted on apps that don't need root.
In case you want to ask me WHY i just didn't follow any of the guides for rooting nexuses in the forum, the answer is because im not sure which is the best/easiest/newest/safest
Im not very familiar with such staff i want to make is as simple as it gets and avoid breaking my phone (if thats even possible).
So please can you assist me to take this first android steps ?
Thanks in advance
safest and easiest.
http://forum.xda-developers.com/showthread.php?t=1529058
Hi, welcome to the GNex and the possibilities with it. I have had my GNex since Jan 2012 and it was rooted 2 weeks later. I'm sure if you search in XDA you find lots of help on rooting. However I started out with the www.galaxynexusforum.com forum and followed the unlocking and rooting by Wug.
Assuming you have a verizon GNex here is what you should follow
Wug's Nexus Root Toolkit v1.6.0 [Updated 11/26/12]
It is a nice tool installed on a windows pc or laptop and I have used it to do my GNex and also another one from a friend about 6 month after mine.
Works great and i think if you follow these thread you are rooted in no time.
Good luck
I have the GSM nexus.
Ok its unlocked now, preparing to root.
I just got 1 more final question, considering i will not flash any other rom or such, with my device ONLY unlocked & rooted, will i be able to get OTA updates from now on or i will have to flash myself ? (also do i need Custom Recovery ? what does it do ? )
equilibriumgr said:
Ok its unlocked now, preparing to root.
I just got 1 more final question, considering i will not flash any other rom or such, with my device ONLY unlocked & rooted, will i be able to get OTA updates from now on or i will have to flash myself ? (also do i need Custom Recovery ? what does it do ? )
Click to expand...
Click to collapse
You dont need a tool to unlock...you just need adb and fastboot.
Ensure ADB Debugging is enabled.
adb reboot bootloader
fastboot oem unlock
At this point you can push a custom recovery to your phone - I think there are recoveries now that support 4.2.
After flashing the custom recovery, boot into it and flash your superuser.zip
Lol...thats it.
I think you can still get OTA's but you will lose root. I suppose if the OTA was that important, you can relock the device (you will lose data) and then OTA up to the newest version and unlock again.
If you have a GSM device you are lucky, because the factory images are pretty plentiful. On Verizon CDMA we only have 4.1.1 (and because of this I only use 4.1.1 stock).
I had to relock and unroot on Tuesday because of a SIM card issue - didnt want Verizon knowing it was rooted. Came home and unlocked and rerooted all over again. Took about 10 minutes total.
After OTA 4.2.1 root is lost. Do i need to repeat the process to re-root ?
equilibriumgr said:
After OTA 4.2.1 root is lost. Do i need to repeat the process to re-root ?
Click to expand...
Click to collapse
rooting a nexus will always be the same steps.