[Q] Unroot - I can't get stock Hboot - Desire General

Hello, I want to unroot my Desire because of warranty. When I flashed official RUU my phone still says AlphaRev Hboot and S-OFF. I don't know what should I do. I searched this forum but no results helped me...
Bootloader says this:
AlphaRev
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-4.05.00.11
[1] BOOTLOADER - Bypassed
[2] RADIO_V2 - OK
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
Partition update fail!
Update Fail!
Thanks
EDIT: [6] System not failed but system is OK

....
in their newest releases, alpharev made hboot write-protected, so that users could restore to stock (to get any rom up and running for example) but not loose custom hboot S-OFF.
in order to go back to stock S-ON hboot, go to www.alpharev.nl and download BravoDowngrader.
flash it using fastboot and then run the RUU.exe

Ohhh, thank you so much! I don't know about Hboot locking. So, my problem is solved!

Related

bricked phone :(

I've already got a thread running in androidforums but I thought i'd try my luck here to.
i've tried flashing numerous stock ROMS using the .exe on shipped-roms and and have come to the conclusion my phone may be fubar'd
I have an o2 branded Desire and have tried 2 different ROMS
Currently my phone is in the current state :-
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
Radio-4.06.00.02_2
Aug 10 2010, 17:52:18
Parsing ...[downloaded.zip]
[1] SPLASH2 - OK
[2] BOOT - OK
[3] RECOVERY - OK
[4] RADIO_CUST - OK
[5] SPLASH1 - OK
[6] RADIO_V2 - Fail-PU
[7] SYSTEM - OK
[8] USERDATA - OK
Partition update fail!
Update Fail!
This is after trying to flash the froyo version for my phone.
I cannot get to a valid boot loader, the only option on my bootloader is RUU and it's not selectable.
It's on the wrong radio for a FroYo ROM, something's gone wrong...

Bricked phone

Be very careful if you try flashing a RUU and are using a Oxygen HBOOT - Don't make the same mistake as me which resulted in an bricked phone.
Before you flash the RUU it seems that it will be an good idea to flash the standard Bravo Stock HBOOT before proceeding with the RUU.
This is the result of my flashing - Only the RUU program can access the phone but fails.
(I followed these instructions: http://oxygenrom.com/viewtopic.php?f=5&t=190 )
AlphaRev Oxygen r2
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
RUU
[1] BOOTLOADER - Bypassed
[2] RADIO_V2 - OK
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail!
use android flasher to flash bravo downgrader from alpharev.nl and then the ruu and that is it.
dzumagos said:
use android flasher to flash bravo downgrader from alpharev.nl and then the ruu and that is it.
Click to expand...
Click to collapse
Thanks, Android flasher did the trick
Bricked is so overused word these days...

[Q] Broken Desire?

I´m trying to restore my desire to factory RUU with RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed but get error.
AlphaRev Oxygencr2
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.102
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010, 17:27:18
HBOOT
Parsing...[SD ZIP]
[1] BOOT -OK
[2] BOOTLOADER - Bypassed
[3] RADIO_V2 - OK
[4] RADIO_CUST - OK
[5] RECOVERY - OK
[6] SPLASH1 - OK
[7] SYSTEM - Fail-PU
[8] USERDATA - OK
Partititon update fail!
Update Fail!
Do you want to reboot device?
I have a Clockwork backup. But i can´t go in to Recovery
Any ideas?
As stated many times before:
Go to alpharev.nl and download the Bravo DOWNGRADER and flash it.
When it's done, then flash the RUU.
Ok.
I have downgrade.
Started flash RUU. Flashing have started and after 3 seconds the screen is total black.
I try to reboot but screen are still black..
Cyberstorm said:
Ok.
I have downgrade.
Started flash RUU. Flashing have started and after 3 seconds the screen is total black.
I try to reboot but screen are still black..
Click to expand...
Click to collapse
U reboot without wait it to finish?? But why? That can brick ur phone..u have to wait it to finish
Sent from my HTC Desire
I can still connect phone to usb and use sdk tools
But i dont have any idea if there some way to fix the phone with sdk tools.....

[Q] HELP ME PLEASE htc desire

hello sorry for my english
I have a htc desire and it rooboting at start (crash) and i try to flash it with the officiel rru 2.3 from htc dev site and when he finished it show me "error 152 : image update error"
So when I try to install the Ruu.exe I get this message :
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
RUU
[1] BOOT - OK
[2] BOOTLOADER - OK
[3] RADIO_v2 - Fail-PU
[4] RADIO_CUST -OK
[5] RECOVERY - OK
[6] SPLASH1 - OK
[7] SYSTEM - OK
[8] USERDATA - OK
Partition update fail!
Update Fail!
With the phone unplugged I only get the black HTC screen with the 4 triangles
error". I tried and read many things but the probleme is that the phone is S-ON. So I cannot install a recovery image
S-OFF
S-OFF your desire using revolutionary
http://revolutionary.io/
Then everything should work just fine.
i try this but he show me waiting for device"it did n detect my device in this situation
it look's like radio brick... not sure this will help try to downgrade with goldcard and pb99200 method to latest froyo, if that fail unfortunately you need to change motherboard
HOw many times a Phone can be flashed ?
i try but not work
your phone is not bricked, read this
http://forum.xda-developers.com/showthread.php?t=1275632
this helped me out when it happened to me.
The OP got a Radio-brick. And a Radio brick can only be fixed by HTC. So I am pretty sure we cannot help him.

Update fail

I did try to upgrade my phone to v2.3 and update was fail in 81%
RUU file did download on this site http://www.htcdev.com/devcenter/downloads/P50
Now am stuck with HTC logo and 4 "!" marks in the corners.
this is what i can see now...
this is what I see
bravo pvt4 ship s-on
hboot-1.02.0001
microp-051d
touch panel-synw0101
radio-5.09.05.30_2
jul 22 2011,16:19:16
RUU
Parsing...[download ZIP]
[1] RADIO_VZ - fail-pu
[2] plash1 - - ok
[3] recovery - ok
[4] splash2 - ok
[5] radio_cust - ok
[6] bootloader - ok
[7] userdata - ok
[8] system - ok
[9] boot - ok
partition update fail!
Update fail!
Help me please I'm in a real problem
how to solve this?
You got a radio brick = dead phone
They say you can try and run the RUU again and again because you might get lucky.
Check the troubleshooting guide on my sig to see if you have a chance of fixing it.
Otherwise you need to go to HTC.. or buy a new phone.
Maybe it's not too late. Like Stankyou said try to flash RUU again, and if doesn't work try to get s-off with revolutionary cause you can still enter bootloader. Then flash radio from fastboot.
Sent from my HTC Desire using XDA
revolutionary doesn't work in this case... It needs a running system...
try couple of times ruu if no worky try freezer trick too, unfortunately you need to send it to htc

Categories

Resources