Related
2/22/08 Links have been pulled and no further support on this base.
Thanks for everyone's support - but 6.1 isn't ready for mainstream use.
Watch for future releases.
Suggestions:
Extract everything into one folder.
In that folder, you should have:
OEM
SYS
ROM
TOOLS
BuildNB.bat
Sweet stuff matt.
Will give it a run at some point, should be working great if PN8b3 is anything to go by.
superstorage
mattk_r said:
Suggestions:
Extract everything into one folder.
In that folder, you should have:
OEM
SYS
ROM
TOOLS
BuildNB.bat
Click to expand...
Click to collapse
Hi Matt
I'm not a big fan of superstorage. Will I be able to use the 3.62.3 base rom and keep the ext rom?
pablo11 said:
Hi Matt
I'm not a big fan of superstorage. Will I be able to use the 3.62.3 base rom and keep the ext rom?
Click to expand...
Click to collapse
Nope. I think the ROM folder from bepe's 6.1 kitchen (V1) isn't big storage, but I need to go back and read through his thread to check. Hope to have some options soon
I've used the older version of this kitchen before no problems. Just loaded this one and it builds my os fine I pick all my stuff as normal then close the window and I get a error report window that buildip.exe has encountered a problem and needs to close.
Any ideas?
MrDSL said:
I've used the older version of this kitchen before no problems. Just loaded this one and it builds my os fine I pick all my stuff as normal then close the window and I get a error report window that buildip.exe has encountered a problem and needs to close.
Any ideas?
Click to expand...
Click to collapse
May need the runtimes in post #2 of the Naked 8b3 thread (in my sig). If that fixes it I'll move the link over to this thread.
same error..
I get the following error every time I execute BuildNB.bat. What am I doing wrong? I have put the specified files in the folder.
Creating 'dump' folder...
Folder created - continuing
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
The system cannot execute the specified program.
ERROR! (errorlevel: 9020)
Press any key to continue . . .
Matt, did you ever figure out if you could pull out a cab file for Windows Live 10.6.33.0700? It is pretty sweet
dgates71 said:
I get the following error every time I execute BuildNB.bat. What am I doing wrong? I have put the specified files in the folder.
Creating 'dump' folder...
Folder created - continuing
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
The system cannot execute the specified program.
ERROR! (errorlevel: 9020)
Press any key to continue . . .
Click to expand...
Click to collapse
Run the runtime app in the Naked 8 thread second post (see sig). That should let it work on your machine. If it fixes it, let me know and I'll move the link over here.
Pumpiron579 said:
Matt, did you ever figure out if you could pull out a cab file for Windows Live 10.6.33.0700? It is pretty sweet
Click to expand...
Click to collapse
Not yet. There are a few modules that are decompiled and on other software packages that I've tried to re-merge, the results have not been good.
I hope someone like Duthroy (who's done many others successfully) will get the chance to do so
Report
Flashes okay, but Pandora 3G Black Dialer has no button graphics except for the video button.
mattk_r said:
May need the runtimes in post #2 of the Naked 8b3 thread (in my sig). If that fixes it I'll move the link over to this thread.
Click to expand...
Click to collapse
Yest it's help with this issue.
mattk_r said:
Run the runtime app in the Naked 8 thread second post (see sig). That should let it work on your machine. If it fixes it, let me know and I'll move the link over here.
Click to expand...
Click to collapse
Thanks mattr that did the trick. Run through with no problems at all. Will report back to let you now how it works.
Updated everything I can and I still get the same error..
Hi, I'm still having a problem with restoring SMS via PIMBackup (even v2.8). I even tried restoring them with SPB backup. The inbox appears empty, although the message number (552 messages) is shown on the bottom. As other users have reported restoring successfully, I believe it might have to do that I have 2 subfolders under ''inbox''.
Anyone got an idea on how to overcome this?
larsuck said:
Flashes okay, but Pandora 3G Black Dialer has no button graphics except for the video button.
Click to expand...
Click to collapse
Ah, ok. It must actually use the .gif files rather than the png. this one had bugged me for a while...
I'll upload a new package for testing and update the OEM Pack if it works.
larsuck said:
Flashes okay, but Pandora 3G Black Dialer has no button graphics except for the video button.
Click to expand...
Click to collapse
Looks like it was missing registry keys in the base. I added them to the package.
Here's the updated package - if you can test I'd appreciate it and if it works I'll add it into the update.
anyone feel like uploading to some mirrors? this could take me all day w/ rapidshare
thanks and great work, matt.
wmDownloader v0.2
This application allows you to easily download files from One-Click-Hosters like rapidshare. It can be used to download your files overnight without use of PC, but remember to plug your PocketPC to charger.
I recomend turning of not cheap GPRS data connection in case of WiFi lost connection.
Application using michyprima's manila SDK.
User guide:
After first start go to "Config" tab, select destination folder for your files and click "Save". Now you can add files in "Files" tab or by editing file "files.txt" and then reloading it using "Menu->Reload files.txt".
When you added some files you can start download process. Files will be removed automaticly from list after download.
Known bugs:
- not all rapidshare error messages are parsed
- directory browser can't create new directory
- some minor UI bugs like formatting timer
Change log:
v0.2
- code prepared for multiple upload websites
- added config for download folder
- new UI
- .NET CF 3.5 used
v0.1
- initial write
Screenshots:
View attachment 275558View attachment 275559View attachment 275560
If you like this application, donate. Donations will be used for making premium accounts.
Donate links:
PayPal EUR
PayPal USD
PayPal PLN
Regrds,
Pawel
First
Nice idea, will test it.
edit: Works, but the problem with my device is , that i haven´t got a Storage Card, it called "Interner Speicher" on my german Diamond. So the files will download only to device storage -.-
Another problem is, that the device turn off, when I am downloading, so it would be nice if you can put in a function, that disable this,during the app is running.
And of course if possible more hoster support, for example netload, upload..
Thanks and this is another link
-info.txt
Rapidshare downloader.rar
Many thanks, elektro255, it simply WORKS!
There is a file, that for the past weeks I never got a chance from crapidshare to downlead it,I was thinking that the site will never give a slot for this file. But last night your lite tool did it. After about 20 times trying by itself, it downloaded the file while I was sleeping.
Here's some minor issues and suggestions:
Like others found, in my Chinese ROM, it created a folder and downloaded the file to main memory.
On my QVGA device, the font size for displaying details is too small.
Is that possible in future release to make it work with other sites like mediafire etc. I don't really have demand for this myself, but maybe others have better suggested site.
Last thing is that your app does not have an icon and the shortcut looks not good in start menu. If you want to keep the tiny size of it and does not want to include another file into it, you may just use one of the system icons that comes with shellres etc.
Anyway it already did what is expected to do.
Premiumaccount and "Speicherkarte" support - would be nice
elektro255 said:
Hi,
I made simple app to download rapidshare.com files over night.
1. App is just pre pre alpha version but works for now
2. I'm not planning to continue work on this app as long as it works fine for me [but if you have good idea what can be included in next version you can write on this topic]
3. For this app is required \Storage Card\ folder.
App written in C# .NET 2.0, tested on HTC Topaz
Downloaded files are stored in \Storage Card\Downloads\
Rapidshare links are stored in \Storage Card\Downloads\files.txt (after edit via external editor, app have to be restarted)
I advise to disable GPRS connection (to avoid big bill in case of wifi disconnected) and to conect charger
http://www.multiupload.com/5VXCHSZZ81
Regrds,
Pawel
Click to expand...
Click to collapse
very good job done there pawel, open up your donation box mate ! you deserve a cherry
This software doesn't support Premium Account?
Software is working fine on qvga...but fonts are pretty small...if possible make it user freindly...thanks
Thank you for the excellent program. I apologize for my English. Not bad, it would be in the input line to copy-paste, and a great author, please do similar programs on letitbit.net and depositfiles.com. Many thanks in advance.
Thanks for the good job! Could you make it possible to choose the directory path to save the file?
Nice work Bro
Small little app but works like a champ!! Works just like rapidshare auto downloader (for those who don't know, just google it coz this is a really convenient software for those who use rapidshare often) but in windows phone version.
Nice job
I decided to continue work on this application. So v0.2 you can download in first post.
Currently I'm working to support other One-Click-Hosters like hotfile, so check this thread time-to-time.
This seems like a really neat program, will be using now!
Thanks a lot!
elektro255 said:
wmDownloader v0.2
This application allows you to easily download files from One-Click-Hosters like rapidshare...
Click to expand...
Click to collapse
What other hosterS(!) does it support?
darfri said:
What other hosterS(!) does it support?
Click to expand...
Click to collapse
it will in feature
Search
Hey great idea, but yea writing the web address is a pain, copy n paste would be good, but how about incorporating search!!!
Maybe hook up to a few search sites, use their code, and then be able to click on it, which inputs the address into what you already have!
Just a thought lol
Poodz
The lack of copy and paste is the one thing that annoys me about an otherwise great application!
elektro255 said:
it will in feature
Click to expand...
Click to collapse
You probably know this already and it won't help you much neither because it is java but anyway... http://svn.jdownloader.org/projects/show/jd
Awesome! I really got impressed when I saw that somebody actually make a downloader for WM. I have a question though, does this work on non-touch devices? [i600, HTC S620/Excalibur]
Hey Guys,
i'm looking for a method to read (and maybe transfer it to my PC) the files of the WP7 file-system for an analysis (not only the isolated storage files - i need more )
( I don't want to run unmanaged code, i only want to view the files of the system)
Reason:
i'm writing my bachelor thesis about the possibility's of a forensic analysis (on WP7).
It would be very (very!!) helpful for me if there is a code example how to do this (if possible)
Edit: i'm working on a samsung omnia 7
Thanks!
endeffekt
(sorry for my english )
you can read the isolated storage files in your PC now?
Search the forum. There are a couple threads here discussing that topic. Normally I would link to it but today I'm not in the mood to do someone's homework for them. (Dang, I'm in a rotton mood today).
You can use what I have of my filesystem lib here: http://forum.xda-developers.com/showthread.php?t=861501&page=3
jmorrill said:
You can use what I have of my filesystem lib here: http://forum.xda-developers.com/showthread.php?t=861501&page=3
Click to expand...
Click to collapse
can you or someone els make .xap of it ?
ceesheim said:
can you or someone els make .xap of it ?
Click to expand...
Click to collapse
There's not a whole lot you can do with that out of the box - It's mainly just a proof-of-concept, showing how you can use a COM Library to read the files. I'm working on a file browser that will attempt to load the files in a basic text reader, but there's little use for providing the sample as a XAP, it just attempts to read BasePolicy.xml.
thanks , then I will wait till you build a nice file explorer , so we can look what files are in the win dir .
FileBrowser
Source
Still very basic, not the most stable either, but at least you can browse the Windows folder, and read text files.
I'll probably put more effort in once I've got further with my SevenIRC App.
hounsell said:
FileBrowser
Source
Still very basic, not the most stable either, but at least you can browse the Windows folder, and read text files.
I'll probably put more effort in once I've got further with my SevenIRC App.
Click to expand...
Click to collapse
wow , thanks (sorry thanks are gone for today ) .
ps what is SevenIRC App ?
ceesheim said:
wow , thanks (sorry thanks are gone for today ) .
ps what is SevenIRC App ?
Click to expand...
Click to collapse
Homebrew IRC App based on jmorrill's Networking Library.
hounsell said:
Homebrew IRC App based on jmorrill's Networking Library.
Click to expand...
Click to collapse
Do you think it's possible to create a simple webserver or ftp server with this library?
ajhvdb said:
Do you think it's possible to create a simple webserver or ftp server with this library?
Click to expand...
Click to collapse
I didn't write any code to listen on a socket in that library. It shouldn't be too hard for you to write that in there and give it a try.
thank you very very much!
it will be very useful for me!
:-*
Hi, I unlocked my phone and begun to install some apps.. Now, I reached the limit and I want to install more. I red that you have to modify this:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg\Install]
"MaxUnsignedApp"=dword:7fffffff
But I just have a horrible registry editor, so I can't see the folder Install.. please help me!
Use provxml method as described here: http://forum.xda-developers.com/showpost.php?p=15791198&postcount=109 (such as many other forum topics)
P.S. I understand, you are very proud of your HTC HD7 but for God sake remove that big picture from your signature!
sensboston said:
Use provxml method as described here: http://forum.xda-developers.com/showpost.php?p=15791198&postcount=109 (such as many other forum topics)
P.S. I understand, you are very proud of your HTC HD7 but for God sake remove that big picture from your signature!
Click to expand...
Click to collapse
The thing is I don't have TouchXplorer, just an awfull registry editor and I can't install more sideload apps! I'm running 7.0.7004
lauticol said:
The thing is I don't have TouchXplorer, just an awfull registry editor and I can't install more sideload apps! I'm running 7.0.7004
Click to expand...
Click to collapse
then remove one app , and install the unlimit app.
after you did that you can install the removed app again , its sooooooooo easy you know
Haha I didn't know you could uninstall and install another.. Thanks
Does anyone have the .xap file of Viber for wp7? Thanks.
aggelosvan said:
Does anyone have the .xap file of Viber for wp7? Thanks.
Click to expand...
Click to collapse
why do not you just download it from Marketplace (MS Store)?
it's still available for downloading.
and yes, if you are encountering a problem with download, just do not forget that now the only way to install some app is just keep hitting the download button. :silly: