FIRST OF ALL LETS ALL TAKE A MOMENT AND PRAISE SHADOWAS1 OLEG_K FOR THEIR LOVELY WORK
AND SPECIAL THANKS TO SHADOWAS1 ALL CREDIT GOES TO HIM
NOW LETS GET STARTED
Hey guys i know that most of the n00bs have faced problems in the installation of android ... and now they are disturbing oleg_k , shadowas1, nbates66 and other developers of the project
well all of these guys are busy
oleg_k is busy with gingerbread port
shadowas1 is busy with a working modem and other android 2.2 problems
so dont disturb them whatever problem you want to know post them here and luckily i have prepared a tutorial for you n00bs!!!
okay here we go
firstly you will be needing these things
1. Android FileSystem http://www.megaupload.com/?d=CI0QUBLY
2. zImage and SBL.bin http://www.megaupload.com/?d=4WDW8BOE
3. Fota: http://badadroid.googlecode.com/file..._boot_poc2.zip
4. Any DBT region firmware (tested and tried it does not install on any other region firmware) examples xxjk1 xxjl2
5. Multiloader 5.62 For flashing some files
6. A USB cable
7. windows for flashing through multiloader
8. Ubuntu or any other linux kernel based OS ... for partitioning and extracting of android rom
--What Works In This Version Is:-
1. TouchWiz 3.0 Launcher
2. Market including installation of apps
3. wifi
4. audio
5. video
6. settings
7. other launcher ... like touchwiz 4.0 launcher link given (other launchers can be downloaded from market)
8. hardware buttons
9. touchscreen drivers
10. market apps and games
--Future Additions Are:-
1. modem
2. gps
3. sensors
4. battery bugs
5. touch bugs
6. rom update to gingerbread 2.3.3 by oleg_k
nFAQ
n00b frequently asked questions
1. wifi not working??
a. so this is the frequently asked question....you will mostly get an error "obtaining ip address" this is a glitch in the ROM so to fix this you have to go to the network settings/wifi settings then in the wifi settings press the down volume button a menu will come up tap on advanced then enable the check on static ip and then fill out all the fields down below thats it now go back by pressing the end call button and then turn off the wifi and turn it on back again thats it your wifi works
2. market error ....apps do not install ?
a. that is surely a CHMOD error now what you have to do is start Ubuntu open a terminal ..in the first field type "cd /media" and hit enter
then "ls" and hit enter (it is a small L and not an I)
then type "cd your ext2 partition name" and hit enter then
type "chmod -R 0777 ./*"
and after this type "sudo sync"
and then unmount the drives by going into "Computer" and press the eject button on the left side panel
lets get started
first you have to have XXJL2 or XXJK1
in windows open multiloader 5.62 click full download
and then choose the bootfiles and the fota file (link given)
enter the download mode on your phone by turning off the phone completely and then pressing the volume down button+hold button+the power button after entering the download mode connect the phone through the usb cable and then clicking port search on the multiloader and then clicking download
after the process is done the the wave will reboot into bada successfully if it does not boot in bada successfully it means you have done something.....so do it correctly
then collect all your android data in a folder and put it somewhere ............ so it can be accessible by ubuntu
then take your phone format your memory card in bada
login as a ubuntu root user
pm me if you want to know how to login as root user
then open gparted partition utility in ubuntu browse to your memory card in gparted delete the fat partition on the memory card and assuming you have a 2gb card make 2 partitions first should be a fat16 partition of 1100 mb and the second partition should be ext3 of 900 mb .
remember to give a name to ext3 partition ...the only reason is that it solves alot of problems
then open badadroid.tgz file in archive manager and then in the file open filesystem.tgz and then open the contents on filesystem folder in the archive manager and then select all the folders and extract all of the contents to the ext3 partition through the archive manager not manually!!!
then after it is done copy the keypad file and paste it into ext3/sytem/usr/keyalyout/
overwrite the existing file
(optional steps:- if you want other customization files download the zip from this;-)
after this
go to your wave internel memory make a new folder "galaxyboot"
and then copy the sbl.bin and the zImage to the folder
after you have done all this
open a terminal first type
"cd(space)/media" then
"ls" it is small L not and I then
"cd(space)your ext3 partition name"
then "chmod -R 0777 ./* "
then after the mod type "sudo sync"
after all this unmount the partitions
dont unplug the cable
just turn it off with the cable connected
after the phone is switched off
after all this process you might notice that the phone is heated up to fix this take out the battery and let the phone cool for 5 mins and then insert the battery close the cover
and press the end call key and after a minisecond press the call key
after you see a messed up screen with green line
let go off the buttons
the first boot might take around 20 mins for slower cards like class 2 or some class 4 cards and 10 mins for faster cards!
and voila ANDROID ON YOUR PHONE
tips and fixes for glitches
1. buggy lockscreen?
a. go to security settings aplly the pattern lock and you will get fast lockscreen
2. Wavealaxy in idle shuts down
a. download "load monitor from app market open preferences go to preferences
Click "Add Notification", "Only Notify high load", "Auto Start"
and "Wake Lock"
and then click the home button voila it does not shutdown
guys how do you like the new phone name
Samsung Wavealaxy S8900
nice tutorial
help ubuntu cannot recognise my wave. it says my device is busy
is there something new to the files or is it just the one from 22-6?
@abd28xd
Don't go with FAT16. FAT32 is the way to go. Also EXT 3 works better and faster for me than EXT 2. otherwise nice tutorial. fix hese points so I can point a herd of Noobs to graze over here!!
abd btw, where is the link for TouchWiz 4.0 launcher?
what's the status of camera driver for photo/video?
welll i am uploading all the customization files on mediafire they will be ready in 5 minutes !
and here is the way you install it
boot bada
start ubuntu
then copy touchwiz 4 apk file to system/app/
overwrite the existing file! =)
and no updtates on camera files i think they will be a top priority after the fix of modem and sensors!!
Samuel Sung said:
is there something new to the files or is it just the one from 22-6?
Click to expand...
Click to collapse
no the filesystem is same but i have uploaded some new files for customization!!
NHS2008 said:
@abd28xd
Don't go with FAT16. FAT32 is the way to go. Also EXT 3 works better and faster for me than EXT 2. otherwise nice tutorial. fix hese points so I can point a herd of Noobs to graze over here!!
abd btw, where is the link for TouchWiz 4.0 launcher?
Click to expand...
Click to collapse
sorry i forgot about that i am goin to change it thank you and yes it will be uploade please wait
tibef97 said:
help ubuntu cannot recognise my wave. it says my device is busy
Click to expand...
Click to collapse
to solve it you need to change the usb port and then again connect your phone in ubuntu!!
Thank you very much !!!
I try to boot android since last friday and i managed to boot it now !!! Thank you very much . Maybe your tut is better then the other one (i know it will be updated) ... Btw i had the green lines/red lines issue. Ah and this time I used a ext3 partition .
the pc had shut down due to some power shortage
started the uploading again
22%
sorry for the delay!
What is the point of ****ing copying my tutorial -_-
ShadowAS1 said:
What is the point of ****ing copying my tutorial -_-
Click to expand...
Click to collapse
Update or perish...lol.
abd28xd said:
guys how do you like the new phone name
Samsung Wavealaxy S8900
Click to expand...
Click to collapse
i think
'' Wave XY i8500 '' (XY from galaXY and i from i9000)
is better
NHS2008 said:
Update or perish...lol.
Click to expand...
Click to collapse
I promised i will update. But ever heard about exams. I'm quite busy with them now.
ShadowAS1 said:
I promised i will update. But ever heard about exams. I'm quite busy with them now.
Click to expand...
Click to collapse
Heheh. I can understand..I was just joking.
All the best with your exams.
guys please who want this tutorial to be finished!
this is a whole lot better for n00bs!!
the other one is too complicated
PLEASE MODS THIS IS N00b FRIENDLY DON'T DELETE IT!!!
PLUS I HAVE NOT COPIED ANYTHING!!
GUYS PLEASE DONT LET THIS TUTORIAL DIE!!
Euhmm. Firstly. my tutorial is not complicated. It's an step-by-step tutorial.
Yours is confusing due to no proper text structure so not easy to read.
Secondly I saw your reply in my thread. I understand you try to help but ask me if i want or need help before posting. And as i promised i updated the tut. It's still monday so...
Hey abd28xd,
thx for your answer and work.
i got this firmware http://www.badapps.ru/376-bada-12.html mainly because it got flac support.
It's a mix of S8500XXJH3 (S8500OXEJH2) (SEB) and S8500XXJK1 (CSC from JL2) maybe someone tried it before and know if this combo works..it's not worth to brick my phone at this stage...
regards
Samuel Sung said:
Hey abd28xd,
thx for your answer and work.
i got this firmware http://www.badapps.ru/376-bada-12.html mainly because it got flac support.
It's a mix of S8500XXJH3 (S8500OXEJH2) (SEB) and S8500XXJK1 (CSC from JL2) maybe someone tried it before and know if this combo works..it's not worth to brick my phone at this stage...
regards
Click to expand...
Click to collapse
Enjoy Man
Congrats
Did my tutorial work??
abd28xd said:
Enjoy Man
Congrats
Did my tutorial work??
Click to expand...
Click to collapse
@abd28x he thanks you for your work. and he askes if the specific FW works.
PS. Read your PM
Related
major update here, the dualizer has become a feature rich toolkit for dualbooting. this includes a modified version of amon ra's recovery image. you need it to use the dualizer toolkit, it is included and can be flashed with one command.
it is a beta version for now. i have tested each option, but i cannot foresee all conditions you might have on your phone... have a backup at all time! and don't forget to backup the stuff from your sdcard before installing dualboot, during the creation of this toolkit i accidently deleted everything on mine...
there is no logging at the moment, if you get any error messages please paste them here in full.
i haven't tried a nandroid backup at all yet, and wouldn't advice you to do it either. please use apps like titanium backup to backup your stuff. i will be looking into getting some kind of nandroid capability, but that is not a trivial topic. i can however imagine to have full pc-based backup capabilites, sometime in the future...
before you use any of the romX options make sure you have installed the dualboot environment, i have no idea what happens otherwise...
i have tried to include a full description, please let me know if something is unclear (i hope it is obvious that romX needs to be replaced with either rom1 or rom2):
Code:
kendon's dualboot toolkit for the HTC Hero
usage: ./dualizer <option>
place the two roms you want to use for dualbooting in the
rom1 and rom2 subdirectories. make sure directories do
contain other files. you can use the temp/ subdir of the
two rom folders to store your roms while you want to flash
another update.zip
you need a modified version of Amon_Ra's custom recovery image.
it can be installed with this tool, see the options.
options are:
help show this information
vmsetup prepare ubuntu vm for usage
check-dev check if your device is properly attached and connected via adb
boot-rec reboot hero to currently flashed recovery
check-rec check if RA-hero-v1.6.2-DBmod is currently flashed
boot-dbmod put hero in fastboot mode (back+power) first!
fastboot hero with RA-hero-v1.6.2-DBmod
no permanent changes are done, works with unlocked spl only
NOTE: the trackball doesn't select, use green key instead
unlocked-spl copies update.zip for unlocked spl to sdcard, so you can flash it.
if this goes wrong it can brick your phone, make sure you do it right!
flash-dbmod flash RA-hero-v1.6.2-DBmod to recovery partition (permanently)
NOTE: the trackball doesn't select, use green key instead
install-db ALL your data will be lost, so you better have a backup!
install dualboot environment on htc hero
this includes partitioning of the sdcard
place roms in folders rom1 and rom2 first!
romX wipedata wipe data/factory reset romX
romX wipedalvik wipe dalvik-cache for romX
for the following options place update.zip file in folder romX first!
romX flash flashes update.zip from folder romX
romX makeboot create boot.img-update.zip files for romX
romX makeboot push create boot.img-update.zip files for romX and push it to /sdcard
i don't see any potential to brick your phone, even if it fails, as the critical parts (spl, radio) are not touched at all. worst that could happen is that you have to do a full wipe and flash a rom... be careful while flashing recovery and/or bootloader though!
as always: use at own risk!
note: first (and maybe second) boot maybe painfully slow. after that it gets better, see for yourself if it is too slow for you. i have been using villainrom and slidevillain in a dualboot for a few days now, i haven't noticed too much slowdown. then again i don't care too much about this.
credits: huge thx to the ppl in this thread: http://forum.xda-developers.com/showthread.php?t=594077 the information in there helped a lot.
changelog:
v0.2: major update, toolkit for flashing, wiping etc.
v0.1: initial release
installation & usage instructions
please read the first post before you install dualboot!
instructions for windows:
instructions for windows said:
the dualboot install can now set up all necessary stuff in a fresh installed ubuntu virtual machine in virtualbox. you must have adb access to your hero from the windows command line, if you need help check theunlockr.com for their awesome video tutorials.
here is a great howto install virtual box in windows: http://www.psychocats.net/ubuntu/virtualbox
and this is the second part, howto install ubuntu in a virtual machine: http://www.psychocats.net/ubuntu/installing
once you are done installing ubuntu download the archive from the first post and follow these steps (the default download directory is "Downloads", so i'm gonna use that in this example):
- go to "Downloads", you find it in "Places" in the upper menu bar
- rightclick the zipfile you just downloaded and select "Extract Here"
- open a terminal window: goto Applications, Accessoires, Terminal
- execute these commands:
Code:
cd ~/Downloads/dualizer/
chmod +x dualizer
./dualizer setup
it will ask for your password once, then do some stuff and finally reboot the virtual machine.
once rebooted, connect your hero to your pc, rightclick on the usb sign in the lower right corner of the virtual machine window and select the "HTC Android Phone". some hardware installations from windows might pop up (happened to me), just click on next and let them do their stuff. if it doesn't work at first shut down ubuntu, then restart your pc and continue. "reboot tut gut", as the german likes to say
back to ubuntu, with your hero connected to pc and virtualbox, open a terminal and check if your hero is detected by adb with the following commands:
Code:
cd ~/Downloads/dualizer/
./dualizer check-dev
this will tell you if your device is properly connected. you can now continue with the options you can get from
Code:
./dualizer help
Click to expand...
Click to collapse
instructions for linux:
instructions for linux said:
you need java, perl and zip setup, make sure that these are available. then follow these steps:
- extract the attached zipfile from the first post on your pc (for this example i'll assume you extracted it on your desktop).
- get the two roms you want to dualboot, do not extract them.
- put one rom in the rom1 folder, the other rom in the rom2 folder inside the dualizer folder on your desktop.
- open a terminal, cd to the folder and make the main file executable by typing:
Code:
cd ~/Desktop/dualizer
chmod +x dualizer
- turn on your hero (recovery or normal, doesn't matter)
- connect your hero to your pc and check if your hero is detected by adb with the following commands:
Code:
./dualizer check-dev
this will tell you if your device is properly connected. you can now continue with the options you can get from
Code:
./dualizer help
Click to expand...
Click to collapse
reserved...
Holy... this is incredible. Great job on getting this out.
I use a virtual box and ubuntu 10.04 lts.The method seems to work but in step 3 on partition card my hero restarts and boots in recovery and i don't have time to mount the usb/htc device into virtual box so i get in step 5 an no device found error.The time is very short.I have to press USB-MS toggle on my hero and after that i have to mount it in virtual box.I've tried it over 20 times but i don't have time and in terminal get me the error.Is there a way to pause the process or a solution to my problem?
Sorry for my bad english
EDIT:SOLVED.Set the sleep from dualizer in step3 from 15 to 30.Wainting for setup to finish.Cross my fingers
EDIT2: Ok now this is getting awkward.Waiting on step 4 (push to sd) for 25 minutes now.I have checked the log.Last line says mounting /dev/block/mmcblk0p1 on /sdcard failed: No such file or directory.Should I wait for it any longer?Or what should I do now?
As I have said on the VillainROM forum; this is really outstanding work.
Well done, Kendon.
Zero00SM said:
EDIT2: Ok now this is getting awkward.Waiting on step 4 (push to sd) for 25 minutes now.I have checked the log.Last line says mounting /dev/block/mmcblk0p1 on /sdcard failed: No such file or directory.Should I wait for it any longer?Or what should I do now?
Click to expand...
Click to collapse
that shouldn't happen, and the pushing shouldn't take longer than a few minutes. you should cancel it by pressing ctrl-c, if you fancy debugging then check why it wouldn't mount. otherwise you can partition your sdcard, do a full wipe and should be able to flash a regular rom.
i guess i underestimated the complexity of the virtual machine solution, gotta look deeper into this... *sigh*
Hi, regarding the Apps2SD issue... Would it ever be possible for the two ROMs that are dual booting to have the same apps sourced from one place... if that makes any sense...
Like in windows... you can "install for all users" so if you log off and someone else logs in with there account the very same apps are there...
Ok bad analogy since we are talking about dual booting different versions like (Vista & Windows 7) ... but the same data on hdd is accessible...
is this possible with the dual booting scenario?
If I had Slide Villain and Villain 5.5 .. both being 2.1 ROMs which would make app compatibility a non-issue...
If I booted up Villain 5.5 and made changes to an app / save data .. could this not be accessible with the slide rom.. I would hate having to install the very same apps on another partition..worst of all if you have save data (such as a game) and wanted to play it on one of the ROMs your game progress would be different?
you could just use Titanium to transfer over the data but agaqin it is a long procedure.
It would be fantastic if we could mirror image exactly what we have on our main Roms to our "secondary roms" ...
Amazing !
Ciao
Fred
Yeah this is really amazing. I have read this on villainRom forum, and i was stupified .
But, if i want to flash another Rom as primary and need to wipe cache, i need to do this process again! Am i right?
for the shared apps:
a shared apps2sd directoy/partition is possible, although you'd have the problem that apps are installed to one market only, and idk what would happen when you update an app in one rom, would the update get market-linked in the other? you can solve this with titanium backup, but it isn't really comfortable at all. i'll think about this.
for shared data: in theory possible as well, but i don't think it would work out well. you cannot distinguish between system data and apps data that easily, and i don't think it would work to share system data (sense settings etc) between two different roms...
@masterxiter: easiest way to do this is to use the installer script again. you can wipe the cache manually, installing another rom would be really complicated (about as complicated as the installer script )...
Sweet. But is there any way i can run this in cygwin? every version of linux ive tried so far doesnt support my crap compaq wifi card or most things, or even wired for that matter, and running ubuntu in a virtual machine gives a reboot every time after step 1 (maybe cos i suck at terminal)
i'll try some time, but i have never used cygwin... so don't expect anything too soon.
joshman99 said:
Sweet. But is there any way i can run this in cygwin? every version of linux ive tried so far doesnt support my crap compaq wifi card or most things, or even wired for that matter, and running ubuntu in a virtual machine gives a reboot every time after step 1 (maybe cos i suck at terminal)
Click to expand...
Click to collapse
if you install ubuntu in an virtual machine like VMware(paid) or virtualbox(free) you can just use linux, it will automatically grab all your internet settings and stuff from the windows installation(main computer) so your windows will be like some kind of router for your virtual machine with everyhing working.
Very nice tutorial, i'm not going to try it.. because my phone has to be resend to HTC for fixing some dead pixels, there just messers with screens
BTW. you can also try another linux version sounds crazy, maybe try backtrack?? the only thing you need is linux, backtrack is..
I have backtrack 4 (I could never get wifi on that either, but tbh i couldnt work out how to try (that distro is soo confusing imo). I got backtrack 3 to work a while back, so if i can find the disk im gnna try that.
Also virtualbox didnt put my internet settings at all (maybe co im on win7 ultimate?)
Thanks for the suggestions, cos i know cygwin aint the most elegant solution
changing rom 1 and rom 2
i test lotz of roms.... everyday they are being updated...
say if i dualize with ahero0.8 and Kimera 1.7....
wud i be able to update aHero to 0.9 and leave kimera as it is???
simply can i update JUST ONE rom???
manual setup??
i tried it got error in step 3 and then 'Device not found errors...'
can u make a tutorial for doing it manually.....
kendong2 said:
please read the first post before you install dualboot!
instructions for linux:
you need java, perl and zip setup, make sure that these are available. then
Click to expand...
Click to collapse
hihi.. i am trying to do a dual boot, so im wondering what u mean by.. need java , perl and zip setup... can advice me?
He means that you need to have Java, perl and zip installed and configured on your Linux system. If you dont have that installed and configured correctly than the install script wont be able to run.
lolnl said:
He means that you need to have Java, perl and zip installed and configured on your Linux system. If you dont have that installed and configured correctly than the install script wont be able to run.
Click to expand...
Click to collapse
oh noes.. .i do not have those in my ubuntu, does that mean i cant do a dual boot? btw, i saw post 2 and post 3 ... are they the same instruction ? or different? (one for windows user and one for linux?)
Guys I'm not Dev or Cooker. I had try almost all the NAND HD Build out there believe me. After i come across this amazing HD BUILD ! that's MCCM Post at Other Thread . After asking for permission from HIM ,He giving me Green Light that i can share this with u [to the moderators please don't Ban me for this if i can't post this just PM me or closed the Thread and i hope this won't happen]
I'm always a BIG FANS of MCCM BUILD And this Build that i'm using right now is PERFECT !!!
All Credit goes to MCCM :
This is from him :
OK Guys i try to write this for u to easy understand BUILD Is Base on DESIRE HD Latest ROM : (1.72.405.3)
After Countless Hours Tweak and Test : The Build i confirm BEST And Stable for Daily used
Before Flashing, copy all your Data on SD Card to pc than Format your SD Card .
Using a full charged battery as the phone does not charge during the initial boot.. remember
Install CWR/NAND/Data2SD needs 4 step :
[Guide]
Step 1 ~ Install Download MAGLDR 1.11 package from xda-developers and extract to an empty folder on your pc. Video:YouTube - How To Install Android NAND ROM On HTC HD2 (No SD Card Needed) With MAGLDR Original MAGLDR Thread by Cotulla is [DFT]MAGLDR 1.11 released! [GOGOGO stuck fixed] - xda-developers
Step 2 ~
2.1)CWR partition layout
Power on phone holding power button to access magldr menu.
2.2)Select the "USB Flasher" item.
Run DAF.exe in the 2 step folder and go through installer to set required partition layout.
Step 3 ~
3th step - sdcard prepare for Data2SD
3.1)After 2nd step will completed, holding power button to access magldr menu.
Select the "USB MassStg" item.
Save all needed for you data on sdcard to other storage.
Copy the Data2SD folder from the step 3 folder to root of sdcard.
After copying will be finished disconnect USB cable.
3.2)Go to "Services->BootSettings->AD SD Dir" in the magldr menu and select the Data2SD folder.
3.3)Next select the "Boot AD SD" item. ClockworkMod will be loaded and you will see ClockworkMod Recovery menu.
Select the "advanced->Partition SD Card" item, next select needed for you the size of partition for Data2SD (Recommended 1 GB), next select 0 as size of swap partition.
3.4)After the partitioning will be done select the "reboot system now" item.
Step 4 - install ROM
After 3th step will completed, holding power button to access magldr menu.
4.1)Select the "USB MassStg" item.
Copy the back the Data2SD folder from the step 3 folder to root of sdcard.
Copy the ROM (MCCM HD V5.0 NAND zip) from the step4 to root of sdcard.
Copy the (update zip) from last step folder to ur roof of sdcard.
After copying will be finished disconnect USB cable.
4.2)Next select the "Boot AD SD" item. ClockworkMod will be loaded and you will see ClockworkMod Recovery menu.
Select the "install zip from sdcard->choose zip from sdcard" item and select zip file from the ROM directory.
After flashing will be done select the "reboot system now" item.
Last Step After BOOTING and done all the setting Restart the phone press the 'End' button to 'magldr menu'
Next select the "Boot AD SD" item.
Volume key select 'update sd card' select 'update zip' press 'call' key running scrip after done select "reboot system now"
FINISH, NOW U WILL HAVE MCCM HD BUILD V5.0 CWR/NAND BUILD With 1GB memory and Roof permission Enjoy
Why u want to update to CWR/NAND Build ?
1) Fast very Fast !!!
2)No lag when download/Install apps
3)Battery 2 ma in standby (normal used can last one day)
4)In call volume Loud
5)Fast GPS detect
6)Wake up (Unlock) less than 2 sec
7)Now u got new battery % icon
8)With MDJ S10 OC kernel u can set CPU to 1500 [ used it with your own Risk ] i set mine max 1300 (smartass)
More improvement that u had to find out your self
What is Working :
Every Things
Accept 720p camcorder
First boot takes more time 20~30 minute "just be patient" very patient u will like stuck at white HTC screen for few time , as it creates directory structure on /data partition. After finish BOOTING the ui will be fast more stable after few BOOTING and after using for few hours GOODLUCK ..
MCCM HD v5.0 CWR/NAND Build download here :
http://www.multiupload.com/KYKTA8O57D
This is from me :
HugeThanks to
-Cotulla~for making all this happen
-MCCM (Build)
-M-deejay (kernel)
-Riptide9
-Letama
-Sergio76
-infinitybiff
-Darkstone
-mattfmartin
-heartsurfer008
-Scabes24
-Phiredrop
-Gho57
-gauner1986's(kernel)
-snq (camera fix)
-letama (ril wrapper for pppd)
-gpc and m-jeey (camcorder fix)
-sopL87-Skin HTC
-others I'm forgetting
All Dev Android HD2 community
If u liking the Build just buy a cup of coffee to MCCM
http://forum.xda-developers.com/donatetome.php?u=1923366
For me just press the 'THANKS' Button
..........
Storage available
How much is left on internalt storage?
q9650 said:
How much is left on internalt storage?
Click to expand...
Click to collapse
U can create as u like .i'm created 1gb as mccm advice .
nice...hope is that stable as you say it is....will try and let you know....
Internal memory ? Thanks.
yesucan said:
U can create as u like .i'm created 1gb as mccm advice .
Click to expand...
Click to collapse
Yeah i know lol, but i mean on NAND how much
q9650 said:
Yeah i know lol, but i mean on NAND how much
Click to expand...
Click to collapse
Mine after all finish BOOT still left me 800 mb .
sorry...one question...are you also going to update this build regurlery?or just this one post?
q9650 said:
How much is left on internalt storage?
Click to expand...
Click to collapse
omg...wha' the f**k is 'internalt'?
that like the 'weeby jeebys' on the iphone?
gerardroid said:
sorry...one question...are you also going to update this build regurlery?or just this one post?
Click to expand...
Click to collapse
Will update regurlery if ok with mccm
Gr8 work thank you
just one clarifying Q:
Is it Squashed or not and is it Deodex or not?
how do install cyang mod?
exp: MDJ's CyanogenMod 7 very beautiful
myRIGHT said:
Gr8 work thank you
just one clarifying Q:
Is it Squashed or not and is it Deodex or not?
Click to expand...
Click to collapse
It not Squashed , it come as original Stock as can be that why i like about this build .
I have high hopes regarding this ROM, its based on Desire Z right? the Screen Shots are somehow confusing though, Does this ROM has SKINS Support? like the Desire HD?
I just wish all is well as you say, but over all your effort is greatly appreciated
Final thing, What about Arabic Support? is it in-built?
Will
rambetiko said:
how do install cyang mod?
exp: MDJ's CyanogenMod 7 very beautiful
Click to expand...
Click to collapse
Don't know that . Because i'm not Dev sorry ...
yesucan said:
It not Squashed , it come as original Stock as can be that why i like about this build .
Click to expand...
Click to collapse
Awesome man
flying with this,i need this so much.
I loved the builds he did before, but I thought he was banned from XDA.
Sent from my DL DesireZ v2.3 using XDA App
Willy318is said:
I have high hopes regarding this ROM, its based on Desire Z right? the Screen Shots are somehow confusing though, Does this ROM has SKINS Support? like the Desire HD?
I just wish all is well as you say, but over all your effort is greatly appreciated
Final thing, What about Arabic Support? is it in-built?
Will
Click to expand...
Click to collapse
The build had multi language support . Arabic support ? not sure about that .. sorry again ..
can you tell me how much memory left for us ? I mean Ram.
HTC Touch HD NANDROID Thread
!! Important !!
Guys i now jack-all at the moment for the Touch HD NAND Process, So dont even contemplate the idea of asking me !! Go to Tida8s forum, and ask there !
Although i already know YOU Will, But for those who have forgotten !!
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Change Log
- 7-7-2011 Vir Twitter
Hi, guys News on blackstone nand. Maybe Sunday I will have the new files for the testing team.
- 1-07-2011
- 23-6-2011 Vir Twitter
Just give it the final touch. So it's official NAND BLACKSTONE 7/1 GET READY GUYS. THANKS GUYS
- 13-06-2011 07:36 AM.
-i will be using froyo x ginger w/o gapps (READY)
-building nbh (ready)
-working with the recovery.img (now)
- 14-6-2011 05:11 AM
UPDATE
ok guys. maybe friday i will be uploading FROYO X GINGER NAND FOR BLACKSTONE
just take a look inside the build update. and let me know if everything is good or if we need to add anything. thanks guys. eta: friday. build only
- 12-6-2011 Vir Twitter
(build) FROYO BLUE CWM 2011.06.12. blackstone. ready.
Youtube NAND v2 on Tida8's Touch Pro 2
- 10-06-2011 11:15 PM
update nand build. OK GUYS, GREAT NEWS. WE HAVE DATA WORKING. OH MAN THIS IS GETTING GOOD NOW. SO WE HAVE WIFI AND DATA WORKING.
- 10-06-2011 04:56 PM
update on blackstone nand
1-froyo x ginger blackstone nand is ready (rom)
2-building the blackstone.NBH now
thanks
- 08-06-2011 04:56 PM
Update on blackstone nand
Ok guys, I just went online to track my phone it will be here tomorrow.
1- I already have froyo x ginger ready with w/o gapps. That's the build that I will be using
2- need you guys to relax. This take time.
3- please don't ask for eta. It will be done when is done.
3- I will keep you guys updated on the proccess.
4- remember thanks to the A TEAM we have nand. It just a matter of time till our devices can have it. But we need people for this to happen
5- eventually I will get more devices, cuz the the only way to start nand testing is to have those the devices
6- my goal is see every device with nand. And to tell you guys the truth I can't do it by myself. Yes it will take time
7- I'm going to talk with tracker to see if we can have an IRC for . maybe
Also remember guys. I have a family outside android. 2 kids and a wife plus a job and a house. I'm always super busy
It's official nand testing for blackstone it' here guys
Sent from my CDMA BLAZN 2.2.2 NAND VERSION using Tapatalk
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- NAND Tutorial
Page 1 By Tida8
setup you sdcard. format your card to fat32 and add this 3 updates
-froyo blue blackstone nand build
- kernel update
-root update
1-first we need to get android sdk set up for you devices.
http://dl.google.com/android/installer_r11-windows.exe (this the exe files) (Recommended)
http://dl.google.com/android/android...11-windows.zip (this the zip)
2- create 2 folder on you C: driver
- RUU (already has the ruu_signed.NBH AND task29)
- ADB (already has the recovery.img)
-download BlackstoneAdvancedRUU and unzip folder.
http://www.multiupload.com/RLJEC2GRCH
for more info on this ruu http://forum.xda-developers.com/showthread.php?t=943851
-download adb and unzip it in your adb folder http://www.multiupload.com/NEEPYUDO6T
3- set up path for your adb and fastboot
right click my computer on your desktop pc. advanced system settings. environment variables. then system variables and double click on path. add this line at the end. just like that
;C:\adb
click ok everything
4- test adb
-boot any build (blue, ginger, frx06. etc....)
-download PdaNet http://www.multiupload.com/OVJ9V01M4F now install pdanet and follow the screen. pdanet will ask to connect your phone. let it finish. when done disconnect usb.
-on your android build go to settings/applications/development/ and check ubs debugging, stay awake, and allow mock locations. now connect you usb
-on your pc. start, run, type cmd, and type adb devices and enter
- you should see your device. you may see this 00000000000 device. that's ok that's your device ID
- great adb is working
5- set up fastboot (the set up for fastboot is done when you flash RHODIMG.nbh)
-when you see the blue screen with usb connected fastboot driver will install. that all
6- [TUT][HSPL] Hard-SPL Unlocker for Blackstone
http://forum.xda-developers.com/showthread.php?t=431217
7- task29 set up ( this will erase windows mobiles) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone. press vol down and power. you will see the (tricolour screen!). connect your phone usb. it may install drivers so wait till finish.
-open RUU folder on your c: driver pc
-right click on BlackstoneAdvancedRUU.exe and choose run as administrator and follow the screen. then the phone will reboot. but it wont pass the htc boot screen, just take the battery out.
8- flashing LK bootloader ruu_signed.NBH
- turn off your phone. press vol down and power. you will see the (tricolour screen!). connect your phone usb. it may install drivers so wait till finish
- open RUU folder. right click on BlackstoneAdvancedRUU and choose run as administrator. follow the screen. then the phone will reboot. you should see the blue screen. it may install drivers so wait, when finish you will see fastboot mode at the bottom in small letters. if nothing happen just pull the battery. read guide 9 recovery.img
9- how to flash recovery.img
-put battery back and connect your phone usb
-click on power. you will see blue screen look for fastboot mode at the bottom.
-on your pc. go to run type cmd and type this command to get to adb folder on your c: drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished. then to get to recovery mode type
fastboot boot recovery.img
the end key is (enter) vol down and up is to move. install updates in this order
-froyo blue build update
-kernel update
-root update
10- when done reboot. take the usb cable out. and welcome to nand
good luck and god bless you all
GUYS, ANYTHING ELSE THAT YOU GUYS WANT ME TO ADD PLEASE LET ME KNOW
i'm still updating this page-----------------------------
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 2 by explicit
NOOB guide for blackstone nand BY explicit
IMPORTANT!!! If you don't have HARD SPL installed on your phone do not continue.You must have HARD SPL for Blackstone installed on your phone
More about HARD SPL in step 6.
Format your micro SD card to fat32.
Add this 3 files from NAND BLACKSTONE FULL PACKAGE
-update-blackstone-nand.zip
- kernel update.zip
-root update.zip
1. Download the android-sdk for your system and install everything on it. Android-sdk depends on Java SE Development Kit (JDK), so if you
don't have java Development Kit installed dovnload it and install it before installing android-sdk. Even after installing On x64 OS you still may get
Java not found during the installation of android-sdk.In that case click Back and than again Next. It should find it now.
Java Development Kit download: http://www.oracle.com/technetwork/ja...ads/index.html
Android-sdk download.Choose installer_r11-windows.exe (Recomended) http://developer.android.com/sdk/index.html
2. Create 2 folders on your C:\ drive
- ruu ( Here we need to have BlackstoneAdvancedRUU from the link below and ruu_signed.nbh from BLACKSTONE NAND FULL PACKAGE)
- adb ( here we need all files from the adb link below)
-download BlackstoneAdvancedRUU and unzip it un the ruu folder from above.
BlackstoneAdvancedRUU http://www.multiupload.com/RLJEC2GRCH
for more info on this ruu http://forum.xda-developers.com/showthread.php?t=943851
-download adb and unzip it. Copy all the files from the extracted archive in the adb folder above.
The path to adb.exe should be like this C:\adb\adb.exe
adb http://www.multiupload.com/NEEPYUDO6T
3. Set up path for your adb and fastboot
right click my computer and select properties. Now go to advanced system settings. Under the Advanced tab at the bottom select Environment Variables.
Under System variables find the line "path" For the Variable name stays path and for the Variable value at the end add this ;C:\adb
Close all windows with clicking OK.
4. test adb
-boot any build (blue, ginger, frx06. etc....)
-download PdaNet http://www.multiupload.com/OVJ9V01M4F now install pdanet and follow the screen. pdanet will ask to connect your phone. let it finish. when done disconnect usb.
-on your android build go to settings/applications/development/ and check ubs debugging, stay awake, and allow mock locations. now connect you usb
-on your pc. start, run, type cmd, and type adb devices and enter
- you should see your device. you may see this 00000000000 device. that's ok that's your device ID
- great adb is working
5. Set up fastboot (the set up for fastboot is done when you flash ruu_signed.nbh from NAND BLACKSTONE FULL PACKAGE)
-when you see the blue screen with usb connected fastboot driver will install. that all
6- [TUT][HSPL] Hard-SPL Unlocker for Blackstone
http://forum.xda-developers.com/showthread.php?t=431217
7. Task29 set up ( this will erase windows mobile from your phone) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone. press and hold Volume down and power on your phone. you will see the (tricolour screen!). connect your phone to usb. it may install drivers so wait till finish.
-open RUU folder on your c: drive
-right click on BlackstoneAdvancedRUU.exe and choose run as administrator, select "Perform Task 29 only" and follow the screen. then the phone will reboot,
but it wont pass the htc boot screen, just take the battery out.
8. Flashing LK bootloader ruu_signed.NBH
- turn off your phone. press and hold Volume down and power on your phone. you will see the (tricolour screen!). connect your phone via usb. it may install drivers so wait till finish
- open RUU folder. right click on BlackstoneAdvancedRUU and choose run as administrator. Select Custom RUU (Task 32) and follow the screen. then the phone will reboot. you should see the blue screen.
it may install drivers so wait, when finish you will see fastboot mode at the bottom in small letters. if nothing happen just pull the battery. read guide 9 recovery.img
9. How to flash recovery.img
-put battery back and connect your phone via usb
-click on power. you will see blue screen look for fastboot mode at the bottom.
-on your pc. go to run type cmd and type this command to get to adb folder on your c: drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished. then to get to recovery mode type
fastboot boot recovery.img
the end key is (enter) vol down and up is to move. install updates in this order
-froyo blue build update
-kernel update
-root update
10- when done reboot.
Read more:
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
!! Important !!
Guys i now jack-all at the moment for the Touch HD NAND Process, So dont even contemplate the idea of asking me !! Go to Tida8s forum, and ask there !
Although i already know YOU Will, But for those who have forgotten !!
Click to expand...
Click to collapse
waiiiiiiiiiiiiiiiiiiiiting
mero0100 said:
waiiiiiiiiiiiiiiiiiiiiting
Click to expand...
Click to collapse
yeah, but i think it sahould be done by tonight or tomorrow
Really hope so.. I keep my fingers crossed about two weeks
NandDroid htc hd
I hope someone can make it.... i can't wait for it!!!! From C.R.
even more fun to know that he was also working on a nand version of gingerbread and honeycomb
Sounds interesting!
Sent from my MZ604 using XDA Premium App
Simon_WM said:
yeah, but i think it sahould be done by tonight or tomorrow
Click to expand...
Click to collapse
i didn't want to disappoint you but tiad say that he will buy blackstone to make trials on it till now he didn't have blackstone so not tomorrow
hope i am wrong and you are right as i want to play with android also
mero0100 said:
i didn't want to disappoint you but tiad say that he will buy blackstone to make trials on it till now he didn't have blackstone so not tomorrow
hope i am wrong and you are right as i want to play with android also
Click to expand...
Click to collapse
... would could be right, but either way if he is going to this is a massive step towards getting NAND !!
I love it. Keep it up. Waiting n waiting n waiting........
Sent from my HTC HD2 using XDA App
mel69hash said:
I love it. Keep it up. Waiting n waiting n waiting........
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Yup, patients is the game
Entering lotus position, waiting...
Guys?
I am little bit off but why are u so happy? NAND means that we will have full android on our blackstone? withnout emulating or things like that? Will it actually work properly?
thank u for response
OMG Nice
And i think my Blackstone is Crap now if full NAND comes yeah Baby ;D
unstable_ said:
Guys?
I am little bit off but why are u so happy? NAND means that we will have full android on our blackstone? withnout emulating or things like that? Will it actually work properly?
thank u for response
Click to expand...
Click to collapse
Just because Android is flashed on the phone instead of WinMo doesn't do magic. It will probably perform the same as from SD-card in case of problems. I believe R/W speed is somewhat faster from nand (different type of ROM than SD-card).
Edit. Besides, isn't there still some problems with nand on GSM phones?
Please fill me in here...
i can see everyone is just waiting to be done,and almost no one is actually contributing...not even with a small donation,because the guy is going to buy the phone so he could provide us something we have eagerly waited for,so even one dollar would be appreciated i am sure
farukb said:
i can see everyone is just waiting to be done,and almost no one is actually contributing...not even with a small donation,because the guy is going to buy the phone so he could provide us something we have eagerly waited for,so even one dollar would be appreciated i am sure
Click to expand...
Click to collapse
Not that i would really be in android/nand/... but i noticed this debate. The problem is that there were just too many false prophets with no results. I would rather recomend a donation to download (like xming) so people can donate for results not for good wishes.
farukb said:
i can see everyone is just waiting to be done,and almost no one is actually contributing...not even with a small donation,because the guy is going to buy the phone so he could provide us something we have eagerly waited for,so even one dollar would be appreciated i am sure
Click to expand...
Click to collapse
Am waiting on the release, then will help with doing bug testing and so on =D
root said:
Not that i would really be in android/nand/... but i noticed this debate. The problem is that there were just too many false prophets with no results. I would rather recomend a donation to download (like xming) so people can donate for results not for good wishes.
Click to expand...
Click to collapse
true (10 chars)
farukb said:
true (10 chars)
Click to expand...
Click to collapse
Yeah, for Android development, i think that seems fair,
What do you guys think ?
Hello guys,
first of all a big thank you to anghelyi for explaining this to me very patiently and for uploading the files!!
Of course the credit also goes to Oleg_k, rebellos,mijoma,srg.mstr,nbates66,adfree, etc. (sorry if i haven't mentioned anyone)
As adfree said, it would be nice to have a tutorial on how to install the current state of the android on the wave , so DO THIS AT YOUR OWN RISK
It is better only for people who have experience in flashing and using multiloader..
Read this tutorial carefully and please read the entire thing! then you will have something like this
http://www.youtube.com/watch?v=YlW7g21PprQ&feature=player_embedded (credits for video - anghelyi)
THIS IS NOT THE STABLE WORKING VERSION, IT IS THE CURRENT STATE
PLEASE FOR HEAVEN'S SAKE, DONT DO THIS IF YOU DONT KNOW TO FLASH PROPERLY, YOU WILL I REPEAT YOU WILL BRICK YOUR PHONE
The procedure:
*Works on s8500XXJL2 firmware. So flash to that firmware first.
XXJL2 Firmware - http://www.multiupload.com/WMGXTWKQH2 (thanks vivekforbes for link)
if pass asked - samfirmware.com (it should be)
Stuff needed
Ubuntu (if you can find a alternate to format to ext2 you are welcome to use it)
Multiloader(google it)
Download Kernel and Filesystem : (you will get an zImage from this file, DELETE it)
http://www.megaupload.com/?d=CI0QUBLY
The new zImage: (credit - anghelyi)
dowload either from :
http://badadroid.googlecode.com/files/zImage.anghelyi
and rename the file to just zImage without the .anghelyi
If lazy to rename just download from here:
http://www.mediafire.com/?xl5aikl5e8r7hv4
Updated FOTA (boot without USB cable
http://badadroid.googlecode.com/files/kernel_boot.fota
Sbl.bin
http://badadroid.googlecode.com/files/sbl.bin
XXJEE bootloader
http://badadroid.googlecode.com/files/S8500XXJEE_BL.zip
Work Begins :
1) Extract the files after download
2) Create folder "galaxyboot" (without quotes) in Wave internal memory and put the sbl.bin and the zImage to this folder.
3)Ok, now get into ubuntu and do the following :
Make two partitons using gparted on ubuntu , one fat32 and other ext2
You have to copy those files while being a root user in ubuntu. For this :
Open a terminal
Type "sudo su" without quotes in terminal
Enter new password
Then click the power button on top right
Login with username as root and password as the pass u entered
Open terminal
Type "sudo file-roller" it will open the archive manager.
Use archive manager to extract files from badadroid.tgz -> filesystem.tgz -> You need to extract 5 folders(system,lfs,dbdata,data,cache..select these 5) to ext2 drive directly.
Copy the new zimage and sbl.bin to galaxyboot folder(create it if it doesnt exist) in wave internal memory
In terminal type "sudo nautilus"
A window will open
Go to ext2 partition system/media/audio and rename "ui" folder to "uibackup"
Open Terminal
Now in terminal type "sudo sync"
Unmount the partitions before unplugging the phone (this step helped milli133 )
RISK RISK RISK RISK
4) Replace the bootloader to XXJEE one
5) Replace the FOTA with the one you have downloaded
TIP - to those who dont know the above two steps : (thanks vivekforbes)
=> Open multiloader and select LSI and select FULL DOWNLOAD
=> Select boot(use xxjee boot files) and FOTA ( precompiled one in above download)
=> click download to flash..
RISK OVER
6) Switch phone on normally to see if Bada is loading
7) Turn off phone, Press and hold call button + power button
8) Thats it! Android is on your phone
Oh disable swype in the settings menu else your keyboard wont work!
DONT DELETE ANY APK FILES, ANDROID WILL WORK FINE WITHOUT DELETING THEM
Enjoy
please dont complain if you brick your phone, i cant test it since i have s8530
umm
how do i delete this thread
cfernr says people may brick their phones because of this
Thank you.
I will try in next 2 days. Then I'll post my results... or my new Questions.
Best Regards
cfernr says people may brick their phones because of this
Click to expand...
Click to collapse
Please let this Thread alive.
HIGH RISK to brick handset
But you can choose self if it is worth to try.
Thanx in advance.
Best Regards
kadavil said:
RISK RISK RISK RISK
4) Replace the bootloader to XXJEE one
5) Replace the FOTA with the one you have downloaded
RISK OVER
Click to expand...
Click to collapse
one little question to these 2 steps:
is there a special method to replace them or do i just flash those 2 only with multiloader?
~MaX~ said:
one little question to these 2 steps:
is there a special method to replace them or do i just flash those 2 only with multiloader?
Click to expand...
Click to collapse
multiloader unless there is some other way to do it
kadavil said:
multiloader unless there is some other way to do it
Click to expand...
Click to collapse
thanks! so its just that easy as adding these 2 files to multiloader and flash them?
any special configuration options for multiloader?
~MaX~ said:
thanks! so its just that easy as adding these 2 files to multiloader and flash them?
any special configuration options for multiloader?
Click to expand...
Click to collapse
lol i dont know
let some PRO answer that
EDIT:
Yes it is through multiloader
thanks vivekforbes
kadavil said:
lol i dont know
let some PRO answer that
Click to expand...
Click to collapse
okay
better a litt,le time to wait than to brick the phone
Why in hell would you even want to get an unstable version of Android on your Wave?
Seriously, this thread should be deleted. Is it just so people can say, "look at me, I have Android on my Wave"??
Just wait until the guys have a stable and working version, instead of harassing them all the time in the other thread.
You will just stuff your phone up and brick it. It's not worth it.
kadavil said:
umm
how do i delete this thread
cfernr says people may brick their phones because of this
Click to expand...
Click to collapse
You can't delete a thread. Only mods can. But even though there's a risk of bricking your phone, people have a choice to do this and this could grow into a wonderful development. So this thread should continue and see what other developers can put into this to make it a stable build.
Altough people can blow up their houses, there exists detailed instructions how to make highly explosive materials.
You've made good howto with alot of warnings, I don't think you can and should feel responsible for any bricked handset.
I have requested this Thread.
Thank you very much kadavil.
To others. Please be sure you know what this means:
Bada Software and Hacking General
Technical discussion of Bada development and hacking. No noobs please.
Click to expand...
Click to collapse
Nobody is forced to try it.
Please stop "sabotage" and censorship.
I am old enough to know what I do.
All at your own risk.
Best Regards
kadavil said:
3) Then create a second partition (it must be the second partition!) with ext2 filesystem on your SD card and extract the filesystem here. (http://www.ehow.com/how_7492668_create-ext2-partition-windows.html)
Click to expand...
Click to collapse
Second partition?you mean logical partition?
Does anybody have the XXJEE bootloader? It's not in the XXJEE firmware on samfirmware.
tom112112 said:
Does anybody have the XXJEE bootloader? It's not in the XXJEE firmware on samfirmware.
Click to expand...
Click to collapse
http://code.google.com/p/badadroid/downloads/detail?name=S8500XXJEE_BL.zip&can=2&q=
How back to pure bada ? ( delete files from sd and flash via multiloader to bada ? )
pawlakpl said:
How back to pure bada ? ( delete files from sd and flash via multiloader to bada ? )
Click to expand...
Click to collapse
Just turn off the phone and turn it on holding the off button....
Just a little question, What's working and what's not working ?
PS: Sorry for my English
what is this step ?
Connect Wave to PC
edit : need i a special program installed on my PC or any speciall cable?
hi all....total Android noob here...
after a lot of research and some 'should i or shouldn't i' episodes, i've successfully rooted my wonder in order to flash to cm9. along the way i've discovered that it is 'desirable' to have cwm 6 installed first.
from what i understand, there are 2(?) ways of doing this...either via stock recovery in the ADB(?) shell or via ODIN...
ODIN *seems* to be the preferred method though. but here lies my problem.....i can't get it to work...i've found several links to download odin, and several links to download cwm 6.....also several different sets of instructions as to how to actually do it.....
it would really help if i had one set of downloads for odin and cwm 6 and one set of step by step, clear, precise, tried and tested instructions....
i've also tried nandroid backup as a 'partial' alternative to cwm 6, but it's not compatible with my phone.
additional info (if needed).....
os version - gingerbread 2.3.5
carrier - 3UK
kernel version - 2.6.35.7-perf-I8150XXK18-CL604835
[email protected] #3
many thanks in advance.....
Keith
Here is the way to flash CWM6 using Odin, if you wanna flash CWM5 just use the md5&ops files for CWM5, which you may need to find them somewhere
1. Download Odin & Ancora.ops & recovery-clockwork-6.0.1.2-ancora.tar.md5
2. Enable USB Debugging in Setting-Application- Development
3. Open Odin.
- Select the ops file, and enable one package in options
- then load the md5(recovery-clockwork-6.0.1.2-ancora.tar.md5) file with the One Package button.
- put ur phone it into download mode, first turn off phone, then hold Volume Down + Home + Power Button for a while.
- Phone will turn on and show some screen, then you plug in usb cable (it may look for the driver through Windows Update so please enable your computer's Internet connection).
Get the files (please find Odin from somewhere else): http://forum.xda-developers.com/showthread.php?t=1446593
Good luck and sorry for my bad English~
THESE STEPS NEEDS ROOT & BUSYBOX, DOESN'T NEED PC & ODIN..
FOR BEST RESULT, UPDATE YOUR SUPERUSER.APK, SU BINARY, AND BUSYBOX
-go here http://www.mediafire.com/?6wkwiko5gmqhuyr link by acro68 the author of W's CM9 and who made CWM possible to our device
-download and extract it..
-put the recovery.img in /mnt/sdcard
-download "Terminal Emulator" by Jack in market (FREE OF COURSE)
-open it then type "su" and click enter
-allow root access..
-then type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13" then click enter <~ THAT IS "0" (ZERO) not "O" word..
-then some text will show in bottom
-exit terminal.. check the recovery by turning off the device then turn on with volume up botton, home button, and power button pressed together.. until "Galaxy W" screen shows up, release the power button only.. then you will enter CWM
-navigate with up (up) n down (down) vol button and home keys (select) and power (back) and click "reboot system now" to reboot
HAPPY FLASHING
*I'm not responsible if your phone bricked*
thank you both for your responses....greatly appreciated....
i thought i'd try IvanKurnia's method first as i thought it looked the easiest
it worked first time i'm happy to report........
i can finally feel a dose of CM9 goodness coming on.....yaay..lol
keithross39 said:
thank you both for your responses....greatly appreciated....
i thought i'd try IvanKurnia's method first as i thought it looked the easiest
it worked first time i'm happy to report........
i can finally feel a dose of CM9 goodness coming on.....yaay..lol
Click to expand...
Click to collapse
You are always welcome...Glad to hear that...Good luck to your CM9 ^^ Now we got more choices of CM9 since quite a number of people had ported AOKP and some other builds to it
MyDeSTiNaTe said:
2. Open Odin.
- Select the ops file, and enable one package in options
- then load the md5(recovery-clockwork-6.0.1.2-ancora.tar.md5) file with the One Package button.
- put ur phone it into download mode, first turn off phone, then hold Volume Down + Home + Power Button for a while.
- Phone will turn on and show some screen, then you plug in usb cable (it may look for the driver through Windows Update so please enable your computer's Internet connection)
Click to expand...
Click to collapse
did you forget to add -enable the "USB Debugging" on Setting-?
if you're gonna flashing stock rom with ODIN, you're not gonna need USB Debugging setting..
but if recovery, you need it..
IvanKurnia said:
did you forget to add -enable the "USB Debugging" on Setting-?
if you're gonna flashing stock rom with ODIN, you're not gonna need USB Debugging setting..
but if recovery, you need it..
Click to expand...
Click to collapse
Oh yea, thanks for reminding, I always enabled it so I forgot to mention that
Hi,
how can I know if CWM6 is compatible with my kernel?
Thanks a lot.
Model code: GT-I8150
Android version: 2.3.6
Version base band: I8150XXKL3
Kernel version: [email protected] #3
Build version: GINGERBREAD.XXLA2
as far as I know, recovery has it's own kernel..
Hi all...installed CM9 last night...all went well....
Have noticed that there's no Task Manager or Media Player Apps....is it just that I'm looking right at them and not recognizing them for what they are, or are they not included in the build?....if they're not included, which 3rd party apps would you recommend for use instead?.....
Also, for information, I had ONE minor glitch occurrence when using the camera.....as follows...
Started camera app..
Changed from primary to secondary (self portrait) camera...
Changed the exposure setting to +2....
App force closed.....
Apart from that, no other issues to report.....
A big thanks to everybody involved for taking the Galaxy W and producing such a fantastic alternative to 'stock'.....
PS......will cm10 be ported to the W?....lol...(got the Modding bug now . )
Sent from my GT-I8150 using xda app-developers app
Hi again....can confirm that the force close camera issue (as described above), is a continuing problem on all increments of exposure compensation setting. With that in mind, is there a 3rd party camera app available that has the same functionality as the installed app but without the gimmicks?......
As mentioned before, CM9 really is a welcome step up from the 'stock' OS, so if the camera issue is the only issue with CM9, it's still worth 'taking that leap'.....
Once again, many thanks for the work put in on this....Keith
Sent from my GT-I8150 with CM9 using xda app-developers app
better you post that on "CyanogenMod 9 bug report & discussion thread" by THE-E.. so then the bug will added to the list
CM9 very good right if there weren't any bugs..
IvanKurnia said:
THESE STEPS NEEDS ROOT & BUSYBOX, DOESN'T NEED PC & ODIN..
FOR BEST RESULT, UPDATE YOUR SUPERUSER.APK, SU BINARY, AND BUSYBOX
-go here http://www.mediafire.com/?6wkwiko5gmqhuyr link by acro68 the author of W's CM9 and who made CWM possible to our device
-download and extract it..
-put the recovery.img in /mnt/sdcard
-download "Terminal Emulator" by Jack in market (FREE OF COURSE)
-open it then type "su" and click enter
-allow root access..
-then type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13" then click enter <~ THAT IS "0" (ZERO) not "O" word..
-then some text will show in bottom
-exit terminal.. check the recovery by turning off the device then turn on with volume up botton, home button, and power button pressed together.. until "Galaxy W" screen shows up, release the power button only.. then you will enter CWM
-navigate with up (up) n down (down) vol button and home keys (select) and power (back) and click "reboot system now" to reboot
HAPPY FLASHING
*I'm not responsible if your phone bricked*
Click to expand...
Click to collapse
It worked great, thanks a lot!
I would just suggest to add the following step BEFORE flashing CWM6, in order to have a backup of the existing recovery image:
dd if=/dev/block/mmcblk0p13 of=/sdcard/mybackup.img
[.::MDT::.] said:
It worked great, thanks a lot!
I would just suggest to add the following step BEFORE flashing CWM6, in order to have a backup of the existing recovery image:
dd if=/dev/block/mmcblk0p13 of=/sdcard/mybackup.img
Click to expand...
Click to collapse
yes.. add it.. don't forget to access root first by typing "su"
IvanKurnia said:
yes.. add it.. don't forget to access root first by typing "su"
Click to expand...
Click to collapse
Actually it worked for me even without typing "su" before...
[.::MDT::.] said:
Actually it worked for me even without typing "su" before...
Click to expand...
Click to collapse
what?! without typing "su" you will not be able to access root..
eh, did you have your USB Debugging enabled? maybe because of it..
Moving CWM6 backups to PC
Hi guys, I have a question here. How can I move my backups I created using CWM6 to a PC so I can free up my internal sd space? I don't think those folders on clockworkmod\backup are full backups because the blob folder is much larger.
I'm using Samsung Galaxy W I8150, CWM 6.0.1.2, CM9 Alpha7.
buruguduy said:
Hi guys, I have a question here. How can I move my backups I created using CWM6 to a PC so I can free up my internal sd space? I don't think those folders on clockworkmod\backup are full backups because the blob folder is much larger.
I'm using Samsung Galaxy W I8150, CWM 6.0.1.2, CM9 Alpha7.
Click to expand...
Click to collapse
just copy or cut the "clockworkmod" folder, to prevent file corrupt, rar or zip it.. if want to restore, copy or cut back to your SD..
safe backup
IvanKurnia said:
just copy or cut the "clockworkmod" folder, to prevent file corrupt, rar or zip it.. if want to restore, copy or cut back to your SD..
safe backup
Click to expand...
Click to collapse
did you already tried it? if i cut it manually from my phone, is there a risk CWM would be corrupted? sorry noob here..
buruguduy said:
did you already tried it? if i cut it manually from my phone, is there a risk CWM would be corrupted? sorry noob here..
Click to expand...
Click to collapse
have already and safe.. BUT:
-make sure your USB Cable is still in good condition.. if you are not sure, DO NOT MOVE CABLE WHILE COPYING FILES..
-you had fast enough PC.. DO NOT COPY FILES WHILE LAGGING
-NO VIRUS ON YOUR PC..
-make sure NO SOFTWARE BLOCKING YOUR PHONE DRIVER..
-if you backup to external sd, BETTER USE CARD READER TO COPY THOSE FILES TO PC
-IF ZIPPING OR RARING FILES, DP NOT COMPRESS LIKE CRAZY (COMPRESS NORMAL OR JUST STORE -without compression-)
-always reject/unmount removeable drive TO PREVENT CORRUPT FILES ON YOUR SD, USB, OR ETC..
safe backup