Related
I installed VIPERrom trinity 2.0 (no blame on them great rom I'm sure this is my doing) but now I can't access sprint services I.e. I. Can't make phone calls send texts or access internet unless via wifi...if anyone would have any possible fixes or suggestions I would greatly appreciate it. Thank you very much.
cnigro21 said:
I installed VIPERrom trinity 2.0 (no blame on them great rom I'm sure this is my doing) but now I can't access sprint services I.e. I. Can't make phone calls send texts or access internet unless via wifi...if anyone would have any possible fixes or suggestions I would greatly appreciate it. Thank you very much.
Click to expand...
Click to collapse
You can either try to reflash the ROM, try a factory/data reset, or Odin back to EB13 prerooted with CWM3 and flash the ROM. Sounds like Odin is the best bet. For Odin instructions follow this:
http://forum.xda-developers.com/showthread.php?t=773032
For EB13 prerooted go here:
http://forum.xda-developers.com/showthread.php?t=853209
Hope this helps.
I greatly appreciate the info but unfortunately neitherof those links helped, most likely my inability to follow the instruction, but when I would download the prerooted eb13 file it did not have any of the files mentioned in the directions...oh well get up early and try again. Thanks again for the help.
cnigro21 said:
I greatly appreciate the info but unfortunately neitherof those links helped, most likely my inability to follow the instruction, but when I would download the prerooted eb13 file it did not have any of the files mentioned in the directions...oh well get up early and try again. Thanks again for the help.
Click to expand...
Click to collapse
To use the EB13 file you need Odin which was in the first set of directions. Here is Odin in case the download link is broken.
This will wipe your phone and restore it to a factory condition but already rooted so on your computer unzip Odin into a directory (I called it Odin) then unzip the EB13 file and put the .tar and .pit files in the Odin directory. Open Odin. Uncheck the F.Reset box. Click PIT and put the EB13-EXT4.PIT in that box. Click PDA and put the EB13 tar file in there. Now power down your phone and Turn it back on holding the 1 key on the keyboard and then hitting the power button. A yellow triangle stating download mode will appear on the phone. Now connect your USB cable to the phone and computer. In a box on the Odin screen a COM number will pop up. Hit start, let it do its thing. If it passes it will reboot. If it gets stuck, pull the battery and try again, try other USB ports or a different cable if it gets stuck a few times. Check your service. If OK then continue to flash ROM.
Now with your ROM already on your sd card, shut down your phone and 3 finger (camera button, volume down, power all at once) into Clockwork Mod Recovery and let it do the EXT4 conversion...do not reboot. After that is done pick Install zip file from sd card, choose zip file, pick your ROM file and hit camera button. It will now flash your ROM.
All this is assuming you still want a custom ROM. If not I will point you to the stock unrooted files.
Thank you so much for the help, once i figured out i needed to download 7zip in order to release the file types it worked flawlessly and took only minutes so again thank you so much...yet after all that the problem was that sprint activated one of our very old phones sitting in a drawer at our house and removed my epic from service haha, so a long, unecessary road but glad to know the process works seamlessly thank you very much.
cnigro21 said:
Thank you so much for the help, once i figured out i needed to download 7zip in order to release the file types it worked flawlessly and took only minutes so again thank you so much...yet after all that the problem was that sprint activated one of our very old phones sitting in a drawer at our house and removed my epic from service haha, so a long, unecessary road but glad to know the process works seamlessly thank you very much.
Click to expand...
Click to collapse
HAHA, that is great. Well now you are much more experienced in restoring your phone in case you get into trouble.
What would happen? My guess is the partition's would shift slightly...but not enough to matter. Has anyone tried this?
Using the wrong pit from a different version of your own phone will bork it. It's made to match the rom/kernel/modem it's installing. It's not just a partitioner, as far as I know.
One thing that unBorks me.........
Normally I have intermittent failure issues with Odin. These usually occur during downgrade for me and usually a recovery.bin or modem.bin failure. I have had a lot of luck unbricking by running only the epic pit through Odin with only Re-partition checked. You will get a Pass/Reset. Wait a ten-count then pull the battery and reboot DL mode, then run the DG27 located on IAP's homepage.
Should be one answer. PM me if you need help.
Hey guys, I have a Samsung Galaxy S3 for Tmobile SGH T999 and I had cyanogen on it until it crapped out and got hard bricked. AFter following these links, http://forum.xda-developers.com/showthread.php?t=1949687 and http://forum.xda-developers.com/showthread.php?t=2439367, I was able to unbrick my phone and get into boot recovery mode. However, when i try to flash the stock firmware in odin, I get an error (the error is shown in the attachment). Can anyone please help me? Sorry if im posting something wrong, I am new to this forum. Thank you!
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
DocHoliday77 said:
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
Click to expand...
Click to collapse
I tried this still doesnt work.
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
DocHoliday77 said:
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
Click to expand...
Click to collapse
Sorry i meant failure not error. I bricked it because my cyanogenmod was having problems and i tried to restore it, after i did it completely bricked. Sorry can you please elaborate what is TWRP, MJC or NC2 firmware, im dont have much knowledge about these kind of things. Thank you so much for helping me, it means alot to me and I will do my best to follow your directions.
Ok, ill explain better when I get to my computer. It'll be too much to try to type on this tiny device im using right now!
But for now, TWRP is a custom recovery, like CWM. You use it when flashing roms like CM.
MJC and NC2 are just the different firmware builds you can flash in Odin. We shorthand it by just using the last 3 letters of the build version. T999UVUENC2 is what im referring to when I say NC2.
Take a look at my firmware thread. Its stickied at the top of development. Linked in my sig too.
Let me know if this helps your understanding at all. Ill explain more in what to do shortly.
Thanks for that, it gave me a better understanding. I tried to install flash and this happens when i try to flash twrp or MJC on odin
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
DocHoliday77 said:
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
ojhasha said:
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Click to expand...
Click to collapse
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
ojhasha said:
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
Click to expand...
Click to collapse
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
DocHoliday77 said:
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
Click to expand...
Click to collapse
It was invisibleK's link that was unsafe. I used your 16GB Pit file in here, http://www.androidfilehost.com/?w=files&flid=6471 and i got the same result. I dont remember where i got the other pit. I got stuck on Leave CS on the odin 3.09 and when i click start it failed again with the repartition failed.
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
DocHoliday77 said:
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
Click to expand...
Click to collapse
sorry i didnt respond in a while, I was really busy with homework. I tried what you said and still no sign of success. I brought my phone to a repair shop and they said the motherboard is damaged and it needs to be replaced for 150$. I hope this guy is just bull****ting me, can anyone confirm? I really hope there is still light at the end of the tunnel right now.
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
DocHoliday77 said:
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
Click to expand...
Click to collapse
do you recommend me doing it? or are there more alternatives.
If the memory itself has gone bad, that's your best option. It is possible to change just the memory chip, but the part is probably hard to find and it requires a higher level of soldering skills.
There's a video of this, if I can find it again ill post the link.
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
yellowonion said:
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
Click to expand...
Click to collapse
did you have my symptoms? did you ever fix your phone? if so please share, i want to get my phone back in the cheapest way possible.
PS. I charged my phone today and the red led light showed up, that means my motherboard isnt broken right?
Not necessarily. It means there is a problem and requires special drivers and programs to fix, (or the debrick sd card). It basically just means the computer sees something is plugged in. If the memory has gone bad it could very well still give the red led and/or boot from the sd.
The only good way to verify the board (or memory) needs replacing would be to go to a second shop and ask them to attempt a jtag repair. If they tell you the same thing as the first shop, ask if they can be more specific about what happened when they attempted the jtag repair. At this point though, its a pretty good guess that the memory has gone bad.
Hello all *waves*
This is my very first post although I have used this site countless times. I'm just going to jump right to it because I seriously need some help!
I am trying to fix my SGH-M919 (Tmobile S4) that just suddenly stopped working one day. I have tried EVERYTHING! Kies, custom roms, Odin but my phone still will not load past the Samsung logo. It will boot into recovery (TWRP) and Download mode. I know that using Kies is the quick fix but (LUCKY ME...not) my phone is one of the few phones tmobile/Samsung sent out with no S/N on the sticker under the battery. Since I cant get into my phone I cant get the S/N and I do not have the box anymore.
I have tried using the many sgh-m919 Stock Rom files online, including this site, but nothing is working. When I spend hours downloading them and begin to use them in odin, Odin doesn't load the file for me to flash.
I know I am using Odin correctly because I have done it successfully countless times in the past. I have also tried EVERY download file out there, but I can't find a good one that I can flash in Odin. I have also tried all of the guides on this site several times so please don't redirect me to them, because I have seriously and correctly tried them all. If you have any suggestion please let me know. I can't afford the 161.00 Samsung is requiring or the 175 warranty fee tmobile is charging. PLEASE HELP.
And if some has a good copy of the Stock Rom for SGH-M919 that they would be willing to email me I would FOREVER be greatful!
also my sdcard and battery are not the issue.... tried that too
Thanks,
Nikki
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
serio22 said:
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
Click to expand...
Click to collapse
I don't know if its something I have done wrong or not. I followed all of the instructions to the letter. I think (but am not sure) that I don't have a usable copy of the Stock Firmware.
I am using v3.10 but I have tried them all.
When I click on AP in Odin, then click on the file I am sent back to Odin, but the file (and filename) doesn't appear in the AP box like normal.
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Frankenscript said:
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
The longest I have waited has been an hour, do you think that I should still wait longer?
Try different version of odin. Even if the file was bad, it would say something
Try a different pc.
Pp.
Good evening folks. I hope I'm posting in the correct place.
First id like to start off thanking everyone for whatever help I can get. I know I've come to the place where I can get some help.
I apologize in advance If I'm lacking any info in my post.
I REALLY NEED HELP.:crying::crying::crying:
I have a rooted metro pcs galaxy s4
I have recently started having a really slow phone. Slow is a understatement actually.
Everything freezes up and I cant do anything with it. I DO have root access.
Anything I try to do such as enter the phone settings, an app or simply try make a call just seems to take a ton of processing power and eventually glitches or freezes up and force closes themselves.
It reminds me of a computer that doesn't have enough memory in it.
I installed some app in the play store that required root access called adjbrightness and ever since then my phone has been crazy slow with apps and services crashing.
I cannot be certain this app had anythinto do with my problem though.
I cant even make a call Its soooo bad.. GGRRrrrrrrrrr......:crying::crying::crying:
I installed one click kango root about a month ago and definitely haven't had any problems until about a week or so ago.
Since then iv tried everything. I'm pretty good with android phones too. I'm always helping ppl fix slow phones or computers.
I fear I may have force stopped or disabled a critical system function or service by accident.
Iv done the following already...
-Factory reset first then uninstalled the root.
-Ever since I unrooted today, I am unsure if I can or should or even could do a factory reset now. Because if I try to do it upon reboot, a warning states that installing custom roms can be damaging to my phone. Um.... Yikes!
-I formatted and removed my SD card.
-Prior to unrooting I did do factory reset several times without results.
I'm really freaking out.
I know this was something that could happen upon rooting as a risk I was taking.
I feel this issue was somehow due to the root access ultimately and that something in the rom (or what not) is glitching badly or some code is just missing.
- I never installed custom rom or messed with the rom that I know of.
-I never messed with any kernels or clocking methods because that's all too scary for me.
-I really didn't mess with things I didn't understand.
I rooted mainly to save battery and ditch some factory bloatware. I'm sure yall can relate.
Oh and I didn't download anything from porn sites, don't worry. HAHA.
Pleeeeeeese, please PLEASE, help lead me on the right path and I will be your best friend for ever.... I just haven't a clue what the issue could be. :crying::crying::crying:
Thank you so much for any and all help in advance.
THX!!!!! K++
---------- Post added at 04:43 AM ---------- Previous post was at 04:36 AM ----------
I would suggest you download the latest metropcs firmware for your device and flash with Odin. Don't worry about the warning, it's supposed to say that. Hopefully you don't have any important info or media that you haven't backed up. If so, back it up before you flash. After the flash, boot straight into recovery and do a factory reset. After that you will start off fresh and your phone should be back to normal
Sent from my SM-G920T using Tapatalk
please help
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
besthomeguy said:
thank you for replying. i am having a bit of trouble. while following the instructions in this thread http://forum.xda-developers.com/showthread.php?t=2258628
im having trouble running odin with any results. I am stuck at the beginning stages ....
after im told to select pda and then select the TAR file i downloaded.
Im unsure how to select the TAR file...
and if i go ahead and run ODIN i get no results.
Im sorry for any inconvenience.
Click to expand...
Click to collapse
Try 3.09, AP=PDA.
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
I see now that im suppose to extract the tar file from the 7zip/zip archive, yet I see no file with that name or extension to do so. Sorry...
besthomeguy said:
Thanks so much for your help. I downloaded odin 3.9. I downloaded both the uvuamdl tar and the stock tar file from here. http://forum.xda-developers.com/showthread.php?t=2258628
and when browsing to add a tar file to odin pda/ap option, there no tar files recognized. Iv spent hours trying to figure out what to do. I know I want to use the mdl file
Click to expand...
Click to collapse
Just saw this right now and if you still need help I might be able to help. I'm also on MetroPCS. That firmware you downloaded is a t-mobile one and I'm not sure what version it is but download the stock one from this thread http://forum.xda-developers.com/gal...tock-base-metropcs-4-4-4-fni3-galaxy-t2899701 then flash it in Odin . After flashing it set it up and all that stuff and do the software update. It'll update your modem to NK3 which is the latest. I'd say use it for about a week and see if it's good or you can just root it right away if you want. I used CF auto root for M919 to root my M919N (MetroPCS version of the S4). For recovery I use TWRP jfltmo. After that just make a backup and keep it on your computer or SD card just incase something happens again so you can flash the backup. If you want to flash a ROM I recommend Hispasian ROM (currently using) or Insane Hybrid. Both are really stable and fast ROMS.
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....
lordodin912 said:
Try 3.09, AP=PDA.
Click to expand...
Click to collapse
Howdy folks, I want to start off saying that Thank you so much for helping me. XDA is a awesome place.
"lordodin" is helping me with this issue in another thread i created although I amgetting anxious to figure this out as i cannot make any calls on my phone and today's my day off work. I hope I am not being too rude by posting my question here too.
-Im following the instructions in the official T-Mobile SGS4 thread in order to run odin here.
http://forum.xda-developers.com/show....php?t=2258628
I have odin 3.9 (and 3.07) and know to select the tar file with PDA/AD button.
although i cannot find the tar file.,
I know the fix tp this lies n the step requiring me to extract the tar file from the 7zip/zip archive,
yet I see no file with that 7zip/zip name or extension to do so. Im honestly tried everything AAAARRRRRGGGGGGGGG!!!
I downloaded all files needed.... triangle away, odin zip, and the mdl zip.
I placed all rooting files on desktop to locate easier and I am always running odin in admin.
I see the issue was solved somewhere else by completing the step requiring to me to extract the tar file from the 7zip/zip archive this step is confusing the heck out of me.....
I even download the 7zip unpacking program from the web hoping it may recognize a TAR file I may have missed with no avail. . Is 7zip a file type?
When i unpack the odin file all i see is the following
-Odin3 v3.07 (or the 3.9 version respectively)(application)
-Odin3(configuration setting)
-tmax.dll(app extention)
-zlib.dll(app extention)
As i said "lordodin" is helping me in another thread with this very issue which is super appreciated. Thx lordodin!!!!
AARRRRG please help folks. Iv been reading everywhere and im stuck....