Related
During replacement ROM v.3.29 on v3.32 WWE.Build 06 the message has appeared "checksum error!" then the device "has hung" and more to load it was not possible...
At attempt of restoring with usage of buttons "record" + "reset" and "camera" + "record" + "reset" in a top of the display part there is a text - " 2006/08/28 09:47:01 " in the bottom of an empty advance - bar and in one second the display is filled by a pseudo-graphics (triangles, point …)
Correctly it is possible enter only the mode - " Photo+Record+Joistick_Action - USB Console mode ", thus there is a text:
Galaxy FlashRom Update
2006/08/28 09:47:01
Cpu version: PXA27x
USB Cable is connected
And in the bottom of an empty advance - bar.
Win XP at connection informs that "the Device USB is not authenticated "...
Please prompt as to restore service capability P525 with usage of this mode?
The service centre Asus in my city is not present...
Download the official ROM v3.32 in the Download section in Asus Website.
Try Re-upgrade
As the operating system does not boot, I tried to load wearing v3.20.official. WWE (ROMGalaxy.nb0), but unfortunately anything new except for circumscribed in my first message has not seen... Where to find the information on that what driver it is possible to use for connection to P525 in the mode " USB console mode " to try to restore the device with the help of the program mtty or any another?
qwsr said:
As the operating system does not boot, I tried to load wearing v3.20.official. WWE (ROMGalaxy.nb0), but unfortunately anything new except for circumscribed in my first message has not seen... Where to find the information on that what driver it is possible to use for connection to P525 in the mode " USB console mode " to try to restore the device with the help of the program mtty or any another?
Click to expand...
Click to collapse
Try the Sorg's Asus Simple rom with 84.5MB of Storage Space with instruction about how to update.
Read the topic here
http://forum.xda-developers.com/showthread.php?t=281393&highlight=simple+rom
and you can download the Simple Rom from here:
http://rapidshare.com/files/1238374/ASUS_P525_v3.32.WWE.simple.build.01.BLU.zip.html
works fine with me... so far
Unfortunately, bootloader has some strange bug which prevents to update ROM through usual procedure if OS ROM image is less than 32MB.
so you have to update it through bootloader instead through autorun.exe.
1) unpack everything to root of MiniSD
2) insert MiniSD to P525. Connect USB cable.
3) press "Camera" button and while holding it press shortly and release "reset". device will boot into ROM update mode.
4) release "camera" button.
5) follow on-screen instructions
P.S: if updater tells "incompatible language" then restart device and execute ASUS.UnlockLangID.exe. After that repeat from step 3.
P.P.S: If bootloader doesn't start update and tells "galaxy .nb0" not found then your bootloader is too old and doesn't support this method of update. Download latest ROM from ASUS site and update it. After that repeat this instruction again from step 1.
Sorg
Be careful, read the instructions and of course whatever you do yo, you do it an your own risk.
Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.
Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.
The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?
Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274
Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance
same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all
in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure
Helppp!!! please
tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?
I close the wcescomm.exe and the rapimgr.exe is there anything else?
The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see
After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!
I change the language of the rom and it works
thank very much all of you
At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....
hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
aE3-ink said:
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Click to expand...
Click to collapse
Thanks for your advices.
When I bought that phone seller didn't mention that this phone belongs to some operator. So is it possible to get information to witch operator it belongs (phone doesn't have any operator brands on his self, and isn't any special application or images in it).
And one more time... is it realy possible that phone belongs to operator... because like I wrote before that i can download and install earlier ROM from official web site, but problem is only with the latest ROM.
Perhaps the download doesn't work as many people had problems installing the latest rom ? It would reboot into the bootscreen & block.
Maybe they have the download until they know why it screws up (but works perfect via an internal flash).
Dunno though, as it's weird you getting the 'operater' message.
Anyway, you can get the latest official rom in here, so you'll be able to flash your device.
Here's the thread : http://forum.xda-developers.com/showthread.php?t=471699
Just flash it from the internal storage. Works fine. Extract the setup with winrar or something, then you will see 2 files - one approx 140Mb, the other one like 2Mb. Rename the big one to Diamimg.nbh and copy it to your internal storage.
* Soft Reset + Hold volume down button + back button <----
* Follow instructions on screen
vladasklp said:
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
Click to expand...
Click to collapse
Read here where it says "stops at 5% or invalid model id:
http://forum.xda-developers.com/showthread.php?t=409425
Next think about HardSPL.
1.93.479.3 if you had this rom in your device, and you tried to download from HTC Support site and get the "This is rom isnt for your device" you get this because there are NO 2.03.479.3 rom the BOLD tells you what region rom u are using. And If you download another rom and try to flash and get "invalid vendor" you MUST hard-spl your device, after that you can flash every rom you can find an example of region rom, I have put this at least 4 times now so people try o understand what i meen when speaking of region roms.
RUU_Diamond_HTC_DAN_2.03.403.2_
RUU_Diamond_HTC_SPA_2.03.412.1_
RUU_Diamond_HTC_FRA_2.03.406.2_
RUU_Diamond_HTC_GER_2.03.407.2_
RUU_Diamond_HTC_WWE-ME_1.93.456.2_
RUU_Diamond_HTC_Europe_2.03.401.2_
Thanks everyone for advices!
First i tried Kevbodian recommended method. Downloaded OliPro's NBH Util and tried rebuild NBH file, but program generates only empty file (0Kb - size), maybe it doesn't work in Windows 7 So I'm fail.
Then tried laser21 method and succeed! I downloaded Unsigned-Hard-SPL-Diamond-OliNex.zip (http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2), installed them, and made everything step by step like he wrote.
Phone works seams fine, but maybe a little bit slower , so I'm tried reinstall ROM one more time, but do that in standard way. Just downloaded _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship (http://forum.xda-developers.com/showthread.php?t=471699) and ran it. Everything was fine (installation pass 100%) but than it shows - ERROR [270] - UPDATE ERROR, phone also restarted and shows information in red/green/blue/white background.
In red space
Code:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
In green space
Code:
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Place try again
So one more time I made like laser21 recommended - and phone works again. But can I do something more that latter update i can do in standard way ?
I'm not sure what you mean by:
But can I do something more that latter update i can do in standard way ?
Click to expand...
Click to collapse
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
I did everything like you (and laser21) wrote. But now i have problem when updating ROM in standart way - downloading official ROM exe file, and ran it (like I wrote before, after 100% proceed it display error that update unsucceed)
So why now I can't update ROM in standard way, maybe is solution to fix that problem ?
Sorry for mistakes in post
Try one more time with out any changes
omaga said:
Try one more time with out any changes
Click to expand...
Click to collapse
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
vladasklp said:
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
Click to expand...
Click to collapse
error 270 has happened before. try searching. I know I am an old hag, but this may be the best help I can give:
in google search for: "error [270] - update error"
include the "" marks.
help me
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
if you have a question
love_mido said:
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
Click to expand...
Click to collapse
please ask it only once....not 3 times in other threads...this is not allowed.
i have deleted them. read the rules before you post again.
thank you
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
This post is exactly what i needed to upgrade using the internal (memory) route.
touch diamond p3700 error
help me!!
My previous users of htc touch diamond p3700 s / n HT827GN42467 through my htc official site upgrade romnya WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, the program does not run again .....
solution please ....
help me please ....
My previous users of htc touch diamond p3700 s / n HT827GN42467 through the official website of my htc rom upgrade its WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, does not show the logo and the windows mobile does not work anymore at all also can not connect to pc ..... how can I fix that right again, the solution please ....
Please help!
My HTC TP2 freezes at start up with the black screen and the Touch Pro2 Logo and some details in red at the bottom:
B 80
R 4.49.25.17
G 61.44tc.25.32U
D 1.86.67102
No USB connection can be established.
What happened:
1. Tried to update from original WM 6.1 to WM 6.5 by using the official HTC ROM update utility. Seems like USB connection broke during update and update freezed at 42%. Update utility process has stopped by itself (no process visible anymore in the Task Manager).
2. Restarted phone and multicolor screen appeared and stayed. After connecting with USB cable again "USB" appeared at the bottom. Started again the HTC ROM update utility which recognized the phone and started the update process again, but stopped at the beginning with an error message stating something like the ROM is broken.
3. Restarted again (by removing the battery and hit power button) and state reached like described above (HTC TP2 freezes at start up with the black screen and the Touch Pro2 Logo and some details in red at the bottom).
4. Performed a hard reset but did not help.
What can I do to bring the phone back to life?
So you can't or can get in the colored screen now? (the boatloader)
And it's kind of normal that their nothing happens after the tp2 + red information screen, this since their is no rom to startup.
EDIT
Is it possible to tell exactly what error you got?
EDIT
Try to hard reset your device, do you know how to do this?
If not this is how to do it:
To perform a hard reset
1. With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
2. Release the TALK/SEND, END and POWER buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Source: http://forum.xda-developers.com/showthread.php?t=523083
This is just what worked for me..
Had the same issue on my tp...
Hope it will work for you.
Did already the hard reset - but this did not help as nothing changed!
One further info: whenever I insert the battery the device automatically starts up - until it freezes again at the start up.
Can someone please help?
It's normal that the device starts up when the battery is plugged in...
But this is just what I know out of my own experience.
So sorry I can't help you farther.
EDIT
Did some research you might want to try to flash your phone by micro sd... (not for sure if it helps but by some people it did work)
Read the tread about flashing at the top of the rhodium section and you know how to do it.
Did another trial: downloaded and copied a RHODIMG.nbh to the micro sd card, inserted it again and pressed volume up at startup -> colored screen appears shortly, then switches to a white screen telling "Loading..." in blue font color, but nothing more.
Is there anybody out there who can help?
Do I need a specific RHODIMG.nbh to make this approach working? I didn't flash this device before, so it has been still in the original manufacturer's state.
frieder01 said:
Did another trial: downloaded and copied a RHODIMG.nbh to the micro sd card, inserted it again and pressed volume up at startup -> colored screen appears shortly, then switches to a white screen telling "Loading..." in blue font color, but nothing more.
Is there anybody out there who can help?
Do I need a specific RHODIMG.nbh to make this approach working? I didn't flash this device before, so it has been still in the original manufacturer's state.
Click to expand...
Click to collapse
suppose 2 press down volume not up after soft reset
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Device is up and running again !
Could enter bootloader mode and tried first to install again via the official HTC installer -> worked!
Thanks a lot for your support!
great news welldone Bro and welcome to the forum!!!
osrix25 said:
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Click to expand...
Click to collapse
For future info, from what I have gathered you must hardSPl for all ROM flashes. If the ROM you flash is the stock ROM, you can also revert your SPL to stock. For any other ROM, you must leave your device hardSPL'd.
Hope I helped.
how were you able to connect the phone with the pc. i seem to have a similar problem but am finding it difficult to connect the phone to the pc. i have activesync installed but cannot connect to the phone
osrix said:
This may help,
Try entering bootloader by switching off device then switch back on holding down the Vol down key.
If you can enter bootloader this way then you wil be able to flash from SD card following the instructions from here
http://forum.xda-developers.com/showthread.php?t=550540
if you want to flash the Official update from HTC you can extract the Nbh from the Exe file you downloaded from them, just use winzip, Zzip or Win RAR to extract the contents from the Exe you are looking for RUU_signed.nbh..follow the above thread instructions to change the name of the file to RHODIMG.nbh.
I DONT KNOW IF YOU NEED TO HARD SPL FOR THIS..Probably better to do it than not. Can Anyone Confirm???
i hope this helps
Click to expand...
Click to collapse
is it possible to connect to active sync in bootloader, cos my phone cannot even boot, it freezes up with a white screen and htc logo.
After entering bootloader you can flash either way,either by ruu package provided by your ROM's maker or running official ruu release or if you have the renamed file on the root of your sd card....I never use sd card flashing and have never had a failed flash...If in bootloader it will not connect with activesync,but device should be recognized by ruu.exe
WC
Hii all,
actually this my first post in the forum and i hope to find the solution to my small prob.
The problem is appearance some words on the jasjar screen like "usb" n "serial"
they doesn't disappear although i 'v done "reset" n "Power+reset+backlight"
They are permanently appear on the screen and make my jasjar as dead ..
----
actually i've open the rom upgrade icon from the mobile directly and i didn't use the pc at all because i didn't know how to upgrade it
----
please if someone know the solution of this prob. tell me >>
n i want to know how to upgrade the rom if i already downloaded it >>
Welcome to forums
have a read on my signature link and check for usb connection
Moving to upgrade section
Please orb or anyone can help >> ):
I want the software of the jasjar which come with the installtion cd ..
I tried to join the jasjar with the pc but there's a problem with the usb ..
Plese help me as my mobile now like dead body
Thanks In Advance ;
Hello,
First instal ActiveSync 4.5 in PC. - if not already installed
Code:
http://www.softwarepatch.com/windows/activesync.html
Then in settings in (ActiveSync) disable (NOT check): "allowed to connect to one of the following port" and "Allow connection to USB".
Perhaps the translation is correct. I use the CZ version. But it's second and third check box.
Now
This works for when the Universal is in Bootloader and Windows Mobile.
1. First download the ROM you want to install.
2. Extract it to a folder (use winar or other extraction software).
3. There will be up to 3 ROMs in the package: ms_.nbf (Extended ROM), nk.nbf (OS ROM), radio_.nbf (Radio ROM)
4. Delete those which you don't want to install. (If you just want to upgrade the radio rom for instance delete ms_.nbf and nk.nbf and leave radio_.nbf.)
5. Download UniversalRUU.zip
6. Extract it and copy into that folder the nbf files you want to install.
7. Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. And plug to PC. Wait few seconds.
8. Doubleclick ROMUpgradeUt.exe and follow the instructions
9. When the upgrade is finished pull out the USB cable from the Universal.
10. You will need to do a soft reset OR hard reset depending on the situation. (note: some say do a soft reset / others a hard reset .. possibly someone with more knowledge could correct me here, but until then it's best to investigate the matter for yourself on the forum.)
11. To do a hard reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three). Doing a hard reset will result in you losing all your installed apps and data so ensure you have a backup of everything first.) Everything should be fine from this time. You have to calibrate the screen and do some tutorial...
12. If after doing a hard reset you want your Universal not to install the extras from the Extended ROM wait untilsetup is complete and then do a softreset when the popup window appears (you have 3 seconds before it installs ExtendedROM)
For a long time I have not installed the new ROM. I remember so I proceeded as follows
Greetings
Svobi
Really I don't know how to thank u
Thread closed as problem got solved