Hello,
I'm a bit of a noob... so here is my problem/question:
My bluetooth headset (Nokia BH-105), when connected to my Diamond and only during calls, disconnects itself automatically.
It happens frequently (2, 3, 4 or more times during one call!).
What happens exactly is that the connection is lost (I see the "headset icon" dissapear on top of the "bluetooth icon" on my phone) and then regained after a few seconds (10, 20, 30 or more seconds!).
I tried the headset with another phone and it works like a charm...
Right now, I'm using "Paki's ROM".
I was using another ROM ("[email protected]'s ROM") and changed it to "Paki's" to check if this was the problem but it still remains...
I'm guessing it could be a radio problem?
My radio is one of the latest (...I think...) for the Diamond: 1.17.25.09
Could this be it?
What is, in your opinion, the best radio I could install for better Bluetooth signal?
Please help!
Thanks!
Related
As everybody know, its quite annoying use Universal as mobile. then, i decided to start to use the Bluetooth headset!
But doesn't work all the time.
If i set one headset, it works fine for few hours, then, after a while, without any message, bluetooth in my Universal turns off it self!!
At begin i though that would be my headset, then i tested with my other headset, and is the same!
Beside that, when i try to pair it them once more, it has static on it.
So, to be able to use it again, i need to:
- Remove device in my bluetooth list
- restart headset
- Search for device once more
And then, it works for a while again.
Well, i have tested in two headset over here, The Dopod H1 and Targus.
Does anybody knows what is going on or had same problem?
Thanks in advance!
Same here
I have experienced the same problem with my JasJar. The bluetooth radio seems to turn itself off from time to time. I think it is somehow related to WM2005, because I had the same issue with a Himalaya running WM2005. What is weird is that the blue light continues to blink. If you go to the wireless manager applet, it sometimes shows the bluetooth as on and sometimes as off, but if you go to the bluetooth setting, it shows the radio as off.
Any suggestions?
TIA
Panabax
Buzz_lightyear may have the solution here: http://www.buzzdev.net/index.php?option=com_content&task=view&id=60&Itemid=41
I'm trying this at present. BT stayed on overnight, despite very low battery, and I'll put it into use all of today. If I go a full day without losing BT then it's solved for me cos I was losing it ALL the time 2 days ago.
Hmm, I had a better day with this reg hack - but I did lose BT once. SO, inconclusive at present.
Guys - I have searched the whole internet and can confirm that there is a problem with the ROM
Until it is fixed Bluetooth will not work as it should
This is a problem i had with original jasjar rom (september 2005). First official upgrade and all subsequent roms have solved this problem. I'm actualy using helmi's aky 3.5 1.3.1 and sony hbh660 dayly without any problem.
hi.
i just bought a motorola bluetooth handsfree for my car HB830. i paired it to my exec and it started working. now the problem is that sometimes the pairing fails and the phone doesnt transfer the call to the handsfree i.e the call remains in the phone. when this happens the exec shows that bluetooth is turned off which i switch back on but the problem comes back after the next call. i.e the phone doesnt seem to be able to transfer the call to the handsfree.i have upgrade my ROM to Rom:1.30.107 WWE
Radio: 1.09.00
Ext ROM: 1.30.162 WWE
is this a problem with the new radio ? should i downgrade to the older radio? if yes then which one and how do i? please help me guys.. thanx
My Uni does the same with my parrot CK3100 car kit...
Its a major pain in the ass....
Seems to work fine with my Jabra JX10 tho..
:roll:
Same problem here with a medion bluetooth car radio.
Most of the times my universal thinks it's paired (icon in the calling screen), but when making or receiving a call it disappears.
After a succesfull bluetooth call, it isn't posible anymore to call handsfree.
Bluetooth also regulary turns itself off. Tricks found in another topic are not the solution for me
if you enable the device lock start\settings\personal\lock
Prompt if device is unused for 16.7 hours
set simple pin
the phone and the parrot device keep there pairing with no problem at all i have been testing it for the last 48 hours
if you disable the above it loses the paring straght the way.
strange is they anyone else who can try this
Thanks
Paul
bluetooth headest problem
hi.
1st thing how do u set it for 16.7 hrs.... it just gives me options of rounded off hours.
i tried setting it for 12 hrs.. it works better but still a problem
Maybe this is a clue:
I use the newest Qtek German Rom, which is from April or May. This should be same version like WWE version.
Since I upgraded to this Rom, all my problems with Bluetooth disappeared. It works fine with my Logitech mobile pro 2 headset. I assume, the problems are only because of the rom.
try upgrading and see, how it works.
hi guys,
I'm having some problems from time to time with the conecction between my p3300 Artemis Vanilla ROM 1.0. and the parrot 3200LS.
the problem is that when I turn on the car and the bt connection is set automatically the parrot appeas as if I was in a call.
if I finish the call still the p3300 and the parrot are linked becuase I cannot reproduce the radio or the CD's ("phone" appears in the display of the car).
if I turn off and on the car, when the bt connection is set again happend the same.
The problem is solved only if I make a soft-reset, so the problem is in the pda and I never had this before with WM5.
any idea?
thanks
kkfuti said:
hi guys,
I'm having some problems from time to time with the conecction between my p3300 Artemis Vanilla ROM 1.0. and the parrot 3200LS.
the problem is that when I turn on the car and the bt connection is set automatically the parrot appeas as if I was in a call.
if I finish the call still the p3300 and the parrot are linked becuase I cannot reproduce the radio or the CD's ("phone" appears in the display of the car).
if I turn off and on the car, when the bt connection is set again happend the same.
The problem is solved only if I make a soft-reset, so the problem is in the pda and I never had this before with WM5.
any idea?
thanks
Click to expand...
Click to collapse
I had a similar problem earlier this week with my Parrot CK3000. But the problem only happened after I tried to download and use MS Voice Commander software. I tried to uninstall and go back to default Speed Dial but it wouldn't work correctly anymore with the Parrot kit or my headset. The software changed my registry settings - couldn't figure out how to fix it, so I had to hard reset.
But, right after a ROM upgrades and hard resets, I get the "phone" condition you described. It's like, the BT channel is just open, waiting for a command. The way to fix it is just to make a phone call and then hang up using the Parrots "end call" button. Then everything goes back to normal and this does not happen again. I only get this if I hard reset or ROM upgrade. Try it.
I was fine with official asia 3.7
I was fine with Vanilla 1.0
Had the problem with Official Europe
Just installed Vanilla 2.0 and we will see how it goes.
Yesterdaty I updated to WM6.5 and now try to get everything working again. Somehow my TP2 won't pair with my bluetooth carkit anymore. With WM6.1 this was no problem. The phone still pairs perfectly with my computer (also bluetooth connection) so I think the bluetooth connection is ok.
When parining to my carkit it finds the device, then I have to enter a password on the TP2, and after that it just sais "pairing connection failed", and it will not work. I am sure the password is not changed since yesterday. I tried it several times. I do not know what to do anymore. Could this be a setting somewhere? I get the feeling my password is not send properly but have no idea.
Meanwhile I tried pairing my carkit with another phone and no problems there. So my conclusion is: something has changed with bluetooth, updating to WM6.5 which makes it now impossible to pair my TP2 with my carkit.
Is there maybe a programm for the TP2 which give me more controll over bluetooth (like maybe go to an older standard)?
I have exactly the same problem as you
good to hear I am not the only one. Hope someone will come up with a solution for this.
I did nor observed any issues when pairing my TP2 after reflashing to WM6.5
There is another issue however - I can not hear any voice until it is charging.
Unplugging of the charger fixes this issue immediately. Horrible...
Seems, HTC guys are saving money on testing by using us as Beta Customers.
Would a custom ROM be a solution for us?
I updated to the "energy 6.5.1 rom" and guess what..............
The same problem. The rom is very nice, but my TP2 still won't pair with my BT carkit which is very big problem for me.
Is there maybe a way to downgrade just the BT part of a rom to WM6.1. I read on different forums there is something that is called a BT stack. Could this be the problem?
I have a ton of problems with bluetooth pairing now. However, I don't know whether it's the fault of 6.5 or the Tilt 2. Here is what I am experiencing...
- On car deck or headphones, the skip buttons don't do anything
- on car deck or headphones, I have to disconnect Stereo Audio and then reconnect to actually get sound. It NEVER works when it auto connects.
- Music will do a brief skip when you shut the screen off
- Stupid message about volume control every time it connects (resolved by switching to custom rom)
- SMS or any kind of alert tone now turns music way down so that the tone is the only thing you hear. Which is super awesome when I'm driving my drunk friends around and they are singing along to a song when suddenly it mutes so everyone can hear my incoming text message.
Not a single one of these issues existed when I had my Fuze.
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
orb3000 said:
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
Click to expand...
Click to collapse
No I do not think so, because I used the official WM6.5 with the same problem. Does someone know a way around this issue. I strongly believe that if only I could pair I have some options to work with it (in 6.1 it worked like a charm). If I only could pair without having to send the passkey it would be great step forward. I presume with sending the passkey, the bluetooth of the TP2 sends out other "rubbish" that confuses my carkit.
My problem is solved and guess what, it had nothing to do with my TP2. The problem was my carkit. It has a maximum number of bluetooth devices (5) it can pair to and the last one (the WM6.1 version of my phone) had been reached. So a hard reset on the bluetooth carkit and the problem was solved.
Well, at least I now know how to flash a rom to my phone and I think I learned more about the phone reading through all the forums. Thanks all for thinking with me on this problem!
Does anyone else still have this problem?? I have removed all the devices from my car and continue to have the same pairing error just after entering the passcode. Stock Spint ROM worked great, but multiple 6.5 upgrades don"t pair..............suggestions/ideas??????
bluetooth settings, advanced, enable beam data exchange,check the box
Interesting.....I actually found a fix. Instead of pairing the phone with the car, I paired the car with the phone. I didn't even know that this was possible, but it did the trick!
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
No, but only tested Plantronics 975. which works fine.
I Have a problem with the bluetooth as well. The connection and pairing are OK but there is no sound coming out of the headset.
I've google it and it seems there is a general problem with the bluetooth audio.
I also have a bluetooth problem.
I paires with my car kit (jvc kd-r711) and after a few seconds i get a error saying "headset disconnected"
I've read similair problems since the froyo update. Anyone else have the same problems?
@johnsten
Yes, I have the same problems with my Volkswagen Golf 6 navi!
At first, the phone connects just fine. No problems at all. Made several calls, phone book is synced automatically. All fine..
But then after some time it gets bugged. When I tart my car, and the systems sais.. phone connected. My desire sais "headset connected", and after some seconds it says "headset disconnected". The Bluetooth connection remains active, but the phone is not in "headset" mode.
The only thing that really seems to fix this problem is a full system swipe, but then I lose all by programs and Angry birds savegames
I really want to get rid of this problem. Any ideas?
Grtz, Ron
similar to jah, only tested the plantronics 975, never had issues
also working well with my Jabra Extreme so far
no problems with Nokia BH-503 and SE MW600
No problem with my SE MW600 either, for 340 SEK (36€) it has everything I need: volume, back, play-pause, forward and mic
No problem with either my JVC-901 car head unit or Sony Ericcson HBH-980 stereo headset
ford focus bluetooth headset issue
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
silvermeanie2412 said:
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731626
I had just the exact problem no problems any more though after this fix I dont know if it was a bad rom flash that screwed something up for me but BT works great now
I have the same problem, bluetooth paired but can not hear anything. I tried over 10 different, but it does not help. Can anyone solve this problem?
I'm having a similar problem with my car stereo & HTC Desire bluetooth connection.
I have a Silvercrest stereo with blutooth which worked with my provious Nokia & Blackberry but cannot get it to work with my Desire (2.2 Froyo)
The 2 devices will pair but when I try to make a call or receive a call the devices disconnect.
I am not at all savvy about flashing ROM's or anything so as simple a resolution as possible please...(& no, changing my car radio is not an option )
Any info is greatly appreciated as I spend a lot of time in the car & need the hands free
Bluetooth problem
saayinla said:
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
Click to expand...
Click to collapse
I have a Pioneer 7100bt car radio and a Desire with Leedroid 2.2f and i does the same.
Does somebody know a solution??
I too have a H680 and like you, callers can hear me however, I can hear them but very quietly even with volume full up.
I also have a Jawbone 2 where I can hear callers but they cannot hear me very well.
The Jawbone 2 was fine with previous handsets.
No solution though, sorry.