Related
Hi, I installed android to my touch but now I'd like to go back to window mobile. I haven't been able to figure out how to flash it back to windows... any help?
Thanks
reflash a winmo build.
I'd love to reflash to a winmo build, but i just don't know how.
search. read the wiki's @ the top.
why go back anyway?
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Long story short. i'm trying android again to see if the newest build has better battery life. the last build couldn't hold a charge long enough to make it worht while as a phone.
The only way i've ever gotten android to get data after being flashed has been to get it working in windows first and then installing android.
i've read and searched for a step by step on how to do this and i just haven't been fruitful.
just download and flash one of the 6.5 builds....there's a very informative guide on how to
The guides that i see want me to establish an active sync connection to flash the device but I have android installed and i cant' establish an active sync connection. I think thats my major hangup. Is there a way to flash it from the memory card?
not that Im aware of.. my have to RUU back to stock and start over.
look here for sprint rom http://shipped-roms.com/shipped/Vogue/
That would be just fine too... i still don't know how to do it. When i run the rom update utility it gives me a connection error.
Edit: I realize that i'm being vague. Let me try to fill in the gaps. I am putting my phone into the bootloader mode, hooking it up to my PC via USB and running the Rom update Utility with a custom rom. The phone has been unlocked so it really shouldn't have any trouble..
What am I doing wrong?
moperist said:
The guides that i see want me to establish an active sync connection to flash the device but I have android installed and i cant' establish an active sync connection. I think thats my major hangup. Is there a way to flash it from the memory card?
Click to expand...
Click to collapse
Put your phone in Bootloader Mode by pressing the Camera and Power buttons and then the Reset button all at the same time.
Then make sure you have a radio of 3.4x or above... If not Flash back to a new stock Rom and then follow the threads you were just reading.
If you radio is good go and Download one of the ROMS here on this forum.
Happy Flashing!
P.S Please Ask your Questions in the Q and A section of this forum.
moperist said:
That would be just fine too... i still don't know how to do it. When i run the rom update utility it gives me a connection error.
Edit: I realize that i'm being vague. Let me try to fill in the gaps. I am putting my phone into the bootloader mode, hooking it up to my PC via USB and running the Rom update Utility with a custom rom. The phone has been unlocked so it really shouldn't have any trouble..
What am I doing wrong?
Click to expand...
Click to collapse
Make sure it says usb at the bottom of the bootloader.
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
moperist said:
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
Click to expand...
Click to collapse
No problem.
Glad you got it figured out!
moperist said:
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
Click to expand...
Click to collapse
No bother....learning experience.
so what was the problem?
so what was the problem because I'm trying to get from android to win 6.5 and the computer is saying that my xv6900 isn't hooked up even though on bootloader it says usb...any help would be great
How to Flash a Vogue without ActiveSync
How to Flash a Vogue Without ActiveSync
A method so easy my Mother could do it.
Not suggesting there's anything wrong with my mother, just that she's not all that technically oriented.
Here's an easy way to flash your HTC Vogue without using ActiveSync. It would likely be a great method to use if you had many Vogues that all needed to be updated as well. Works great for those not using Windows, as well.
Look around for a Transflash (aka MicroSD) card, one that you can erase, 2GB or less.
Use your Windows machine to make sure it's freshly formatted as FAT32]
Copy the ROM you want to flash to the card.
Rename the file you just copied to VOGUIMG.nbh If you are flashing a different model, you need to be sure you have the right file name for it. I think the pattern is the first 4 letters of the model name with IMG.nbh after it, but if it doesn't work, don't blame me,
Put card in phone.
Enter bootloader mode by holding the CAMERA and POWER buttons, while pressing the RESET button in the little hole in the bottom of the phone. (don't bother to connect it to your computer)
Enjoy a caffinated beverage of your choice, or an alcoholic beverage of your choice, or heck, a nice tall glass of cool water while you wait.
Watch as your phone automagically flashes itself!
Congratulate yourself on a job well done.
This is what I'm going to use from now on for flashing with a Mac or Linux. For those addicted to flashing, you can even take a collection of cards with you. I'm not yet sure if you can have multiple ROMs on one card, and just rename the one you want to flash or not yet, but I'll likely find out soon.
ATTENTION:
Missing any of these will make it NOT WORK:
Card must be normal SD, not SDHC or XDHC. No bigger than 2GB
Card must be formatted with FAT32. They often come formatted FAT16 or plain FAT, and a previously-used card could have just about any format on it -- NTFS. HPFS. HFS+. EXT3 -- Format it right to be sure.
Be sure you have the right name. I've heard that CaSe cOuNtS -- the name above has been cut/pasted from a working reflash card.
There is no #4.
Have fun!
Oh yes, just in case:[Lawyer]You are responsible for your own actions. This information is provided as a public service, and I wave all responsibility for it's correctness or how it is used. If you brick your phone, it's your fault. If your phone explodes, not my problem, but I'd like the remains.[/Lawyer]
Gr1zz said:
How to Flash a Vogue Without ActiveSync
A method so easy my Mother could do it.
Not suggesting there's anything wrong with my mother, just that she's not all that technically oriented.
Here's an easy way to flash your HTC Vogue without using ActiveSync. It would likely be a great method to use if you had many Vogues that all needed to be updated as well. Works great for those not using Windows, as well.
Look around for a Transflash (aka MicroSD) card, one that you can erase, 2GB or less.
Use your Windows machine to make sure it's freshly formatted as FAT32]
Copy the ROM you want to flash to the card.
Rename the file you just copied to VOGUIMG.nbh If you are flashing a different model, you need to be sure you have the right file name for it. I think the pattern is the first 4 letters of the model name with IMG.nbh after it, but if it doesn't work, don't blame me,
Put card in phone.
Enter bootloader mode by holding the CAMERA and POWER buttons, while pressing the RESET button in the little hole in the bottom of the phone. (don't bother to connect it to your computer)
Enjoy a caffinated beverage of your choice, or an alcoholic beverage of your choice, or heck, a nice tall glass of cool water while you wait.
Watch as your phone automagically flashes itself!
Congratulate yourself on a job well done.
This is what I'm going to use from now on for flashing with a Mac or Linux. For those addicted to flashing, you can even take a collection of cards with you. I'm not yet sure if you can have multiple ROMs on one card, and just rename the one you want to flash or not yet, but I'll likely find out soon.
ATTENTION:
Missing any of these will make it NOT WORK:
Card must be normal SD, not SDHC or XDHC. No bigger than 2GB
Card must be formatted with FAT32. They often come formatted FAT16 or plain FAT, and a previously-used card could have just about any format on it -- NTFS. HPFS. HFS+. EXT3 -- Format it right to be sure.
Be sure you have the right name. I've heard that CaSe cOuNtS -- the name above has been cut/pasted from a working reflash card.
There is no #4.
Have fun!
Oh yes, just in case:[Lawyer]You are responsible for your own actions. This information is provided as a public service, and I wave all responsibility for it's correctness or how it is used. If you brick your phone, it's your fault. If your phone explodes, not my problem, but I'd like the remains.[/Lawyer]
Click to expand...
Click to collapse
i do as yousay after i put it in bootloade mode it says loading for a split seconde then goes back to bootloader i need help i have android with no data i read that i need to reinstill wm get data working their then re install android i cant get wm back on this phone im going on 3 days trying to flash this yes its unlocked
ok, phone was on charge, phone rang, went to answer, phone rebooted!. Left it but it stayed on 02 screen??.. Battery out, reboot - same thing!
Tried going into recovery but again it hangs on the o2 boot screen?
What the hell has happened?????
Was running DeFrost 3.6 with no problems!
Someone please tell me my phone is not kaput!!
First of all, pull off your sdcard.
Tried that - removed sdcard - still same.. o2 boot screen...
Can anyone help me please?? I cant even get into recovery to to a nandroid restore.. everything i try the phone just sits there on the o2 screen... is there a way to reflash an original rom incase i have to send it back???
I just dont undestand why answering the phone on charge i have ended up with a f**cked phone???
So i imagine you can see hboot screen.
You may try to flash a new recovery with unrevoked.
Yes i can see the Hboot screens.. i tried the unrevoked methos but it wont go any further than saying: waiting for device enable usb debugging... as the phone wont startup.
Vicious circle eh.. thanks for quick reply though..
b6rt said:
So i imagine you can see hboot screen.
You may try to flash a new recovery with unrevoked.
Click to expand...
Click to collapse
What i was going to say .... if you cant get to the hboot screen well then bad times indeed
Extreme solution
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
No i CAN get into hboot screen.. i just have no idea as to what to do now???
vivus said:
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
Click to expand...
Click to collapse
Ok, i will lose root but will i be able to use the unrevoked method again??.. or am i completey screwed then as hboot will be too high etc...
I have put my goldcard in.. but just cant do anything
So...the alternative is to have a not working phone. In any case, Unrevoked or not, you should give it a try if you don't have other solutions. But I suggest you to read a lot of threads before you proceed... many similar experiences could help you to understand the procedure.
Yeah agreed.. would rather a working phone.. I have been looking at the bricked threads but they are not so easy to understand.. Appreciate the help though..
wingnutta said:
Ok, i will lose root but will i be able to use the unrevoked method again??.. or am i completey screwed then as hboot will be too high etc...
I have put my goldcard in.. but just cant do anything
Click to expand...
Click to collapse
follow the hboot steps using the .zip file everthing will return to default so then you can use unrevoked to root you phone again #
Edit quoting this -
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
Ok, i am completely stuck now.. I think i can repair the phone but i just have no idea how. I have trawled through bricked threads..just cant find a solution.
I think if i could get usb debugging enabled unrevoked might just work.
Using the cmd tool i can use enableqxdm 0 and it says okay - however unrevoked still does not see it as neither does my pc!
I have no idea how to restore my nandroid without getting into recovery???
I am unsure weather to flash the PB99img.zip as i have a branded phone and i am worried i will completely brick it!
Just so so lost....
Heres a tip though - dont answer your phone when its on charge!!!!
jshields said:
follow the hboot steps using the .zip file everthing will return to default so then you can use unrevoked to root you phone again #
Edit quoting this -
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
Click to expand...
Click to collapse
Can i use any of the PB99IMG.zips then as it was an o2 branded phone??? Or can i use the update.zip (is this the nandroid backup??) thats already on my sd card - have card reader so can mess about with that no probs..
I have just seen where it checks for the image afetr getting to Hboot so i understand what its looking for now... Question is what image do i use..
Really do appreciate all the help guys
Ok, i tried flashing one of the pb99img and i get a CID error (incorrect). It says this is because goldcard is not present but it is???? Is it because i am using a different standard rom to the one that was on the phone???
I give up for today - i gotta go to work. If i could get USB debugging to work i would probably be ok, but when i do the commands via cmd prompt it says okay but it doesnt seem to do anything!
My goldcard now seems like it doesnt want to be one, thus the cid error..
I am just going round in circles here..
Think i might just throw the damn thing out of a window - Its doing my head in!!!!!
All from answering the poxy phone whilst plugged in!!!!!
wow.. was hoping for a few replies.. guess no one has any ideas.. guess i am buggered then... ok so if i send the phone back to o2 - what is worse case scenario if they do see its flashed??.. will they just charge me for the fix or just not touch it at all??
wingnutta said:
wow.. was hoping for a few replies.. guess no one has any ideas.. guess i am buggered then... ok so if i send the phone back to o2 - what is worse case scenario if they do see its flashed??.. will they just charge me for the fix or just not touch it at all??
Click to expand...
Click to collapse
I would suggest you put your SD card in your computer and verify the content. Or even better, I hope you have a backup of your SD Card after you rooted your phone. I think your partition may have gone, so you can't boot up anymore. Try to format your sd card, partition it with Gpartition or whatever prog you have and copy back the content of your SD Crad back up on your newly formated SD card. It should do the trick. The same happened to me when I changed my 8gb SD Card for a 16gb one.
Good luck and let me know how it works (or not).
forelli, in Darth Sidious mode.
The sd card seems ok in a card reader? I did do a backup a while back but i have a spare sd card so i will try that? Would the sd card problem stop me going into recovery though??? I thought that was phone based and not sd card based??
I've never tried to do anything beyond readily available 3rd party apps. I've never jailbroken anything or rooted. I don't know how to work with ROM's and I've never used command prompts beyond installing difficult software on my desktop. (I'm using Win 7 on my PC) and I have no linux or coding experience. That said, I'm smart, I research things fully b4 I actually DO anything & I follow directions exactly when i do something unfamiliar.
I bought my Desire about 45 days ago thru USCC. Stock it's running 2.1. On Fri using UnREVoked 3.21 I tried to root. It appeared to work. I have the Superuser file at least...
However, when I followed unlockr.com's tutorials for downloading & flashing ROM's it became obvious that something was not right (screens weren't the same, options weren't the same or even close in some cases, & controls, like pushing power to go back after recovery didn't work.) The screen turned black, I had a minor heart attack & then the phone finally rebooted into it's original USCC configuration.
Now, I DID have an option to "install from SD card" but nothing that said "flash from sd card" and I'm assuming -maybe incorrectly- that there's a difference??
After 4 days of searching sites, I know there are too many posts on USCC rooting & Desire for a noob like me to know what to do. I have a mess that I need help to untangle.
Prior to my failed ROM attempt, I had installed save to sd... which I think may have moved everything to my SD card. Since rooting, I tried using Root Explorer to remove facebook, twitter, City ID etc.... EX: I can see bloatware files on my SD card, and the program SAYS it deletes them, but it reboots on exit and there's CityID again!
I can mount the SD card as a disk drive on my PC and look thru the SD card files. (some of which appear 2B duplicates. When I rooted, I installed the Hboot drivers and followed the unrevoked directions exactly. I renamed the recovery file as update and left it as a zip... but there are now two "update.zip" folders on my SD card. They are different sizes and neither contains all of the files of the other; although some of the files in each of the zip's are duplicates.
I don't know what files SHOULD be on my SD card and what is extraneous material. I don't know what I need to install to get to where I'm ultimately trying to go... which is running 2.2, getting rid of these "extra" files and gaining the ability to wifi tether my phone.
I do NOT know if I have S-off or not... and I'm not sure how to tell. AND, I'm not sure if this is the base cause of the other issues or not.
Is there anyone willing to get me thru the vast amount of material & help me to get my Desire running the way it is capable of functioning?
At this point, I'm even willing to switch carriers to get what I want if the issue is USCC's proprietary nature...
Thanks in advance to any1 willing to help out
Bethyk said:
I've never tried to do anything beyond readily available 3rd party apps. I've never jailbroken anything or rooted. I don't know how to work with ROM's and I've never used command prompts beyond installing difficult software on my desktop. (I'm using Win 7 on my PC) and I have no linux or coding experience. That said, I'm smart, I research things fully b4 I actually DO anything & I follow directions exactly when i do something unfamiliar.
I bought my Desire about 45 days ago thru USCC. Stock it's running 2.1. On Fri using UnREVoked 3.21 I tried to root. It appeared to work. I have the Superuser file at least...
However, when I followed unlockr.com's tutorials for downloading & flashing ROM's it became obvious that something was not right (screens weren't the same, options weren't the same or even close in some cases, & controls, like pushing power to go back after recovery didn't work.) The screen turned black, I had a minor heart attack & then the phone finally rebooted into it's original USCC configuration.
Now, I DID have an option to "install from SD card" but nothing that said "flash from sd card" and I'm assuming -maybe incorrectly- that there's a difference??
After 4 days of searching sites, I know there are too many posts on USCC rooting & Desire for a noob like me to know what to do. I have a mess that I need help to untangle.
Prior to my failed ROM attempt, I had installed save to sd... which I think may have moved everything to my SD card. Since rooting, I tried using Root Explorer to remove facebook, twitter, City ID etc.... EX: I can see bloatware files on my SD card, and the program SAYS it deletes them, but it reboots on exit and there's CityID again!
I can mount the SD card as a disk drive on my PC and look thru the SD card files. (some of which appear 2B duplicates. When I rooted, I installed the Hboot drivers and followed the unrevoked directions exactly. I renamed the recovery file as update and left it as a zip... but there are now two "update.zip" folders on my SD card. They are different sizes and neither contains all of the files of the other; although some of the files in each of the zip's are duplicates.
I don't know what files SHOULD be on my SD card and what is extraneous material. I don't know what I need to install to get to where I'm ultimately trying to go... which is running 2.2, getting rid of these "extra" files and gaining the ability to wifi tether my phone.
I do NOT know if I have S-off or not... and I'm not sure how to tell. AND, I'm not sure if this is the base cause of the other issues or not.
Is there anyone willing to get me thru the vast amount of material & help me to get my Desire running the way it is capable of functioning?
At this point, I'm even willing to switch carriers to get what I want if the issue is USCC's proprietary nature...
Thanks in advance to any1 willing to help out
Click to expand...
Click to collapse
i cant tell you how to fix it, but what i can say, is if you really borked it, you can take it into a uscc store saying you have no idea what happened. i used to work for uscc until about 2 months ago. until that time, out of the 3 corporate stores i was working in, not one associates knew what rooting was. and none of the "smartphone team" had either. so they would most likely just send you a replacement. good luck
I thought about that... And I really don't even mind paying for it if I need to replae the phone, I will... But I figure at this point, worst case scenario I have aphone I can "play" with and figure out IF I can do any of this stuff successfully. I've discovered in the last year that I sort of have a talent for figuring this stuff out. This is the first time I've ever needed to find help with a problem and I've built several complete systems. I'm hoping there's someone who might be willing to suggest a course of action. If you have any ideas- even if I brick the darned thing- I'm willing to give it a try!
Thanks to anyone brave enough to reply!
Bethyk
Sounds like the second tuturial you were following was trying to root your phone again, but with the older method.
Turn on your phone holding volume down. You will get a white screen with some options in the middle, select recovery (it says at the top of this screen s-off or s-on, yours should say s-on, this is how to find this out.)
When recovery loads it should say clockwork recovery, a custom recovery flashed by unrevoked during the rooting process.
Use this recovery to flash a zip of whatever rom you want. Be sure to wipe data also if changing roms or any problems arise.
I've figured this much out at this point... I did root my phont with unREVoked 3.21. However, I did NOT S-OFF the device. So I'll try what mercianary suggests & let you know how it goes! Thanks a ton!
Bethy
Are you using the mouse button at bottom of phone to select in black and green recovery screen? If you are using power button to select it will give you a blank screen.
Ive seen the program OpenRUU but can anyone tell me how to use it?
i want to flash from software 2.09 to 2.10 or above? is this possible? im rooted thru unrevoked but running a stock rom. Other than a gold card do i need anything else to use this program? and even if the ruu fails, it will not damage my phone?
thanks, adbird
EDIT: Actually do i need a gold card, my phone used to be branded under telus, but then i flashed a couple roms and eventually flashed the stock WWE rom, so do i need a gold card?
I have no experience with Mac but if you can't use a RUU, there is the PB99IMG.zip(which you can find using windows when the RUU is extracted) method which functions pretty much the same.
As for the gold card, you do need one, - debranding a branded handset doesn't make it unbranded .
Some people confuse "debranded" and "unbranded".
k thanks i guess i gotta go buy another sd card :/
There is no problem in making your regular card in the device, your goldcard, i.e., you don't need a dedicated microSD for gold card use exclusively .
but isnt clockworkmod kept on the sd? what if you format it
If I understand you correctly, you want to flash "2.10 or above".
Make a your card a goldcard ;
Put the ROM you want to install in the root of the memory card (/sdcard/ - in other words it should not be in any folder);
Make sure that the rom is renamed from something like "PB99IMG_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed.zip" to "PB99IMG.zip" (zip is the extension, not part of the name);
Turn off the phone;
Turn on the phone while holding volume down, it should be recognized and you'll be asked to apply it.
will that unroot the device?
This might work for you
It helps flashing RUU's
WAIT, BEFORE YOU START, CREATE A GOLDCARD. IT IS VERY NECESSARY. THINGS WILL GO WRONG IF YOU DONT.
EDIT: YOU MUST BE ABLE TO BOOT GO TO THE BOOTLOADER MENU.
Firstly, download this file. http://dl.dropbox.com/u/13240777/Desire Downgrade.ZIP
Extract the files.
Transfer the file PB99IMG to the root of your SD card (It is located in the extracted files)
Secondly, disconnect your phone and turn it off.
After that boot up your phone while pressing the volume down button and the power button.
The bootloader should be checking for files after awhile and once it found the file that is supposed to be in the root of your sd card, press the volume up button (NOT EXACTLY SURE, SHOULD BE THE ONE THAT SAYS YES AND CONTINUE)
It should be writing files to your phone. and replaces everything. E.G: HBOOT, RECOVERY,RADIO and such.
It should be writing files successfully and then it would ask you to reboot. Continue with the reboot and you should be having your Desire back to stock. Perfect.
PLEASE KEEP IN MIND THAT THERE ARE RISKS INVOLVED LIKE FAILURE OF WRITING TO THE HBOOT. PLEASE REMEMBER TO FOLLOW INSTRUCTIONS. MAINLY, DO NOT BLAME ME FOR ANYTHING THAT GOES WRONG.
FINALLY, YOU SHOULD BE READING EVERYTHING UP TO HERE AND THAT YOU MUST HAVE A GOLDCARD (A GOLD SD CARD)
Hope this helps you and please ask if you have further questions. PM me if the questions cannot be answered here. Good Luck
adbirdie said:
will that unroot the device?
Click to expand...
Click to collapse
Yes, flashing a RUU unroots the phone.
But rooting again is easy.
Hey Guys,
Before I ramble on about my problems, I would like to thank all the amazing devs that work night an day to make our phones awesome. I have been reading these forums for a couple of weeks and have seen how helpful everyone in these forums are to us noobs.
I'm not new to Rooting (Rooted my G1 a while back and Jailbroke a 1st Gen iPhone way way back lol), but this is my first time Rooting my 3G Slide, which I have had since they were first launched.
I am attempting the No-PC Method described here: http://forum.xda-developers.com/showthread.php?t=896148
I have been trying since last night with no success. I have followed the process step by step, to the T, and continue to encounter the same error every time I try.
I succesfully flash the ESPRIMG.zip and then go to Recovery to apply the "update.zip" file so I can go into Clockwork Recovery, however instead of going into Clockwork Recovery it just gives me the following error:
E:failed to verify whole-file signature
I have searched the forums and none of the responses and solutions have been helpful as almost all of them are users who have already flashed a ROM on their phones as opposed to the Stock one, and a lot of them seem to be prior to this new AndRoot method.
Also, I am using this method as I do not have a USB cable for my phone or a PC for that matter, and havent really researched any Mac mathods of Flashing a Custom ROM to the phone.
Any help would be mucho appreciated!
i think you have to have the update.zip file in the root of your sd card
I reformatted the SD Card and only placed the necessary files in the root of the card. There is nothing else in the card at the moment except for the update.zip file, ROM, gapps, and radio updates. I have no idea why i keep ketting this error, from all the research I've done, this should be working, but clearly there is something I'm doing wrong :-/
yixmal said:
I reformatted the SD Card and only placed the necessary files in the root of the card. There is nothing else in the card at the moment except for the update.zip file, ROM, gapps, and radio updates. I have no idea why i keep ketting this error, from all the research I've done, this should be working, but clearly there is something I'm doing wrong :-/
Click to expand...
Click to collapse
yeah, that's not good if that's all you have there. i was working with someone over at the tmobile forums who was getting the same error (http://forums.t-mobile.com/t5/myTouch-3G-Slide/Easy-root-unroot-Froyo-for-all/td-p/649239/page/6) and it turned out they had the downloaded files in a different folder, and moving them to the root made it work... you may want to try using the files you need from this link instead: http://richard.gluga.com/2010/08/complete-guide-to-rooting-and-hacking.html
I'm a newbie to the whole programming side of computers, familar with using one though. I am going through the steps of the no pc rooting, and I read through step 6 and I thought it was confusing it says...
Install And Run Root Explorer then Copy and paste flash_img and mtd0.img to /data/local on android device multi-select copy then rm r/w in program in upper left on data local folder. I am confused with the rm r/w section there, I haven't gone through the steps, just want to have a general idea before I get in there and screw something up.
Yeah, that ones a lil tricky apparently. Root explorer can be found in the market for ~$4, but if you click the link for the tmobile forum, we found that another app (free) works just as good.
I managed to make it work last night. I'm pretty sure I kept downloading the incorrect ESPRIMG.zip file from several sites. I think I was getting the original stock ROM as opposed to the Engineering Build.
Anyways, mine's working now.
As for the step 6 on the instructions. It basically means that after you paste the files you need to go back to the android system (the folder where you can see everything thats on the android) and at the very top of the window you will see a button that says "R/W" next to something like "Mount as R/O". You just need to hit that button so you can write to the folders, then go back to /data/local and long press "Image_flasher" click on permissions and make sure everything is checked, then repeat on "mtd0.img" file.
I know its a long explanation for such a small step but I try to be as detailed as i can. Hope it helped.
Get
update.zip
Put iton ur SD card
and a ROM.zip that you like n the SD card as well..
see if that works
yixmal said:
I managed to make it work last night. I'm pretty sure I kept downloading the incorrect ESPRIMG.zip file from several sites. I think I was getting the original stock ROM as opposed to the Engineering Build.
Click to expand...
Click to collapse
^ This
I just went through the same thing - I had restored my phone back to stock and then went to re-root it. I have 2 copies of ESPRIMG, file sizes as follows:
The one that was giving me problems: 145,045,641 bytes
The one that ended up working: 143,701,302 bytes
Once I used the slightly smaller ESPRIMG the process worked perfectly. When using the other one I was getting the same error as the OP.