Related
Toi su dung 1 cai xdaii tieng Trung,version 1.52.chs Sau do toi chuyen sang tieng Anh nhung giua duong dut ganh nen bay gio khong bootloader duoc nua. Toi da dung t-mobile de flash lai nhung khong duoc. Xin cac anh chi gium cach khac phuc.Xin cam on nhieu
I think it would help if you mentioned what language you are posting in, so we can select the correct translation in babelfish.
( probably chinese, given that you mention '1.52.chs', but I did not know
that you could write chines with latin letters )
or maybe you can even translate it to english yourself?
Vietnam
It's Vietnamese (or Cambodian?):
"die utilize give up 1 XDAII ???, version 1.52chs. After that, die ..."
I gave up parsing too much of the dictionary output (damn, Vietnamese is tough...), but lots of unhappy words about not working, death and disappointment, and then the bootloader being a medicine of sorts. It ends in a request, either for some other ROM than TMobile German or for that ROM, and something about solving his problem.
So we have Vietnamese/Cambodian in da house ?
Toi su dung 1 cai xdaii tieng Trung,version 1.52.chs Sau do toi chuyen sang tieng Anh nhung giua duong dut ganh nen bay gio khong bootloader duoc nua. Toi da dung t-mobile de flash lai nhung khong duoc. Xin cac anh chi gium cach khac phuc.Xin cam on nhieu
translated to English from Vietnamese:
I use an Chinese XDAII version 1.52. I later upgraded to English but the upgrate failed and I have no bootloader. I tried T-Mobile to flash again but failed. Please advice for repair. Thank you very much.
Robernguyen,
You should try to flash using SD card following these steps:
1. Get a .nbf file from www.yorch.net
2. Down load XDATools. Information about XDATools is at http://forum.xda-developers.com/viewtopic.php?t=2189&highlight=xdatools
3. Buy an external USB SD reader/writer and a SD card and connect it to your PC.
4. Run XDATools on your PC and write the .nbf file to the SD card.
5. Insert the SD card to your XDA1 and do a soft reset while hold down the power button. Follow the intruction on screen
Ben
You can try...
If you are living in Hanoi:
You can go to 53 Ly Quoc Su to meet Huy hoamo (free- repaired)
If you not in Hn
You can try the flashing ROM method -but I think that ROM .NBF from Yorch.net only for XDA I
The best you can try ROM 1.60.00( XDA II) unzip and use tool to get ROM.NBF
:wink:
ding dong dang
Hello all ! I have 1 T-Mobile MDA but someone has upgraded it to O2 ROM (3.17.03). Tell me pls if I can upgrade my MDA back to its original ROM ?
Thanks !
Hello everyone!
Is there anyone who knows how can i get hungarian rom for my xda orbit?
szia,
én még olyannal nem találkoztam...pedig már 1 pár éve Orbit-om van. azért ha találsz akkor oszd meg velem . üdv.
hungarian language
I would need hy o2 orbithoz Hungarian language but 6.0 brings for you are 6.1
Hungarian:
Szerintem a végleges wm6.5.1et megcsinálom magyar nyelvre, egyszer már csináltam 6.1et szóval a módja megvan, csak ****ll várni. De ajánlom ezeknél a gépeknél az angol nyelv használatát. Előnyös több szempontból is. Minden szoftver úgyse lesz magyarul.
English
I think i will translate the official final build of wm6.5.1, once i made a wm6.1 so i know how can i do. But i recommend to use english language, because there will be no hungarian support for all softwares.
hungarian rom
na annyi hogy az én pda-mon 6.1 rom van fent és ahhoz kellene nekem magyarosítás vagy 6.0 hoz ha elküldöd a linket akkor megköszönném
Hungarian:
Én nem ajánlom az ilyen magyarító programok használatát, de van egy pár fizetős megoldás (Leng, Interwrite) keress rá googleben biztos megtalálod.
English:
I dont recommend to use translator softwares, there are some but you need to pay for them (Leng, Interwrite) just use google and you have to find it.
re
csak mondom haveromnak is a htc diamondom alapból rajta van és gondolom hogy van htc p3300 ra és o2 xda orbitra is mivel nekem ez a kettő pdam van
És miért gondolod, hogy a 2 pda supportja ugyan az? Egyébként az általam leírt szoftverekkel szokták azokat a pdakat forgalmazni. Nincs hivatalos magyar nyelv - Microsoft nem adott még ki fordítást.
Why do you think that, the 2 pda's support is same? But they are go out with softwares what i've written. There's no official language support for hungarian - Microsoft didnt release translation (yet).
re
akkor lenne egy kérdésem a 2 pda-ra meik romot ajánlod tehát külön külön mert mind a kettőn 5.0 van és eléggé gagyi
Hungarian:
Igényeidtől függ. Én a saját 6.5-ömet használom. A két pda-ra ugyan azt a romot tudod használni.
English:
It depends on what you need. I use my own 6.5. You can use the same rom for your phones.
re
linket tudsz küldeni?? am a magyarositás ha nem teljes akkor is jó
re
akkor a te 6.5 rom linkedet betudod linkelni am a magyarosítással kapcs nemgond ha csak félig magyar az is jó
Itt van xda-n ne mondd, hogy nem láttad Várj még egy kicsit mindjárt fent lesz a Release 2 angol (WWE), azt használd, stabilabb és optimalizáltabb!
re
akkor a te romodat eltudod nekem küldeni vagy linkelni??
Topic címe, itt mindig eléred a legfrissebb kiadásaimat
Letöltési link kimásolva a fenti linkről
re
tudnál nekem abba segiteni hogy a xdam-ra meik romot tegyem fel pl meik 6.5 őt mert én amit találtam egyik se volt jó :S
Hali! Kaiser-re nem tudsz wm 6.5-ös magyar ROM-ot? Gondolom az Artemis-é nem jó a Kaiser-re vagy igen?
Hello! Az általad készített magyar romok HTC Diamondhoz jók?
worxart said:
Hello! Az általad készített magyar romok HTC Diamondhoz jók?
Click to expand...
Click to collapse
Na haragudjatok, de az embernek leég a képéről a bőr, hogy a honfitársatok...
1. ezen a fórumon az angol nyelv az elfogadott
2. olyan ostobaságokat kérdeztek, amire senkinek nincs kedve felelni
Nembaj, ha kezdő valaki -hisz valahol mindenki elkezdte... De ez nem mentesít senkit az alól, hogy utánaolvasson valaminek -amiről 10000000000000 számra vannak leírások.
-Az idegen nyelvek nem ismerete, pedig nem dicsőség -sokkal inkább szegénységi bizonyítvány...
DE, amire nektek szükségetek van, azt egy internetes fordító használatával is megtudhatjátok -ehhez nem kellene a többi ittlévő magyart is leégetni...
I apologize for using the Hungarian language.
You guys revived a 2 year old rom request thread. Although I appreciate you using the search function, this thread is wrong in several ways.
Also, post in English please. It's in the forum rules.
who can creative vietnamese unikey for s620, plz help me. i'm a vietnamese person
haha, Mr. Trị come here to find a Vietnamese Input Method for S620??? I tried at least 7 programs, but I got no thing. Try [email protected] Typing, It's good, but after typing, you must copy text and paste in some place (sms, contact, winword...) Some body help us. I really need a Vietnamese Input for Smartphone S620.
you don't need to copy and then paste, because in [email protected] Typing, after you choose a textbox to put text in, it will automatically copy the text you've just entered into that textbox.
Yes, I know it. But it's so inconvenient. I tried GoTiengVietCF on S630 but it just show hint, and no character show up in SMS box... there are a lot of virtual vietnam keyboard for pocketpc, but too few for smartphone. (
sorry, it's not GoTiengVietCF, it's AEKeyMap. But I also cannot run GoTiengVietCF on S620.
Copy and Paste few Vietnam characters/words from one of your current Vietnames doccuments to make the autotext learns itself to complete it dictionary. The next time when you type, it will prompt you a hint, just select the characters/words u entered before. That how I type a message in Vnese and sent to may contacts
Start > Setting > Joggr > Bottom key Application Name: "\Storage Card\Programs\[email protected] Typing\[email protected] Typing.exe" (without "", you can enter your real path to [email protected])
in the next field, enter: "1052,1003" (without "")
done!
in your SMS input box, double-touch your bottom JOGGR bar to show [email protected] > enter your words in VN > OK and your words will auto-pasted in yout SMS input box.
learn english and may be you can get a job with ct nước ngòai and you don't have to worry about sửa phone anymore
hehe. thanks porto35, funny Vietlish! I'll try my best to learn English!
up date thời tiết cho anh em nè ASIlVNlVM017lHANOI các tỉnh khác anh em thực hiện đổi đuôi nhé
có bác nào xem tv bằng phần mềm SPB TV ko ạ?có pm em nhé,quangthuan_st,e cài vào ko sài được phần mềm của nó hơn 100 kênh em toàn phải xem bằng SPB online,xem được 57 kênh
anhthuan12 said:
có bác nào xem tv bằng phần mềm SPB TV ko ạ?có pm em nhé,quangthuan_st,e cài vào ko sài được phần mềm của nó hơn 100 kênh em toàn phải xem bằng SPB online,xem được 57 kênh
Click to expand...
Click to collapse
I'm a Vietnamese. And this is an international Forum. So, try to write in English to improve it (although it's not good). Don't write Vietnamese in here! Try your best to learn English in this forum.
and never ask for cracked versions of sharewares, mod will delete them
nguyenphucthanh said:
I'm a Vietnamese. And this is an international Forum. So, try to write in English to improve it (although it's not good). Don't write Vietnamese in here! Try your best to learn English in this forum.
Click to expand...
Click to collapse
or use a translator, they are plenty of them in the web
sorry,I see a doctor tv software not SPB TV? said nhé em, quangthuan_st, they are not set to use the software to its more than 100 channels you have to see the full SPB online, watch 57 channels,thanks
anhthuan12 said:
sorry,I see a doctor tv software not SPB TV? said nhé em, quangthuan_st, they are not set to use the software to its more than 100 channels you have to see the full SPB online, watch 57 channels,thanks
Click to expand...
Click to collapse
If I can understand what you wrote, I will die right now! (Hiểu gì chết liền!)
I say no Proficiency in English
people who have installed software spb tv,
This is a2 of 2.0 SDK...
Link removed...
Request.
Maybe someone can upload or Link to Alpha of bada 1.0 please.
Thanx in advance.
Best Regards
[GUIDA] Creare applicazioni per Bada
METODO 1:Bada App Builder [/B] un tool che rendà accessibile a tutti la creazioni di applicazioni per Bada.Pensate per coloro che non hanno tempo di acquisire conoscenze specifiche nell’ambito della programmazione, Bada App Builder consentirà di creare applicazioni in 3 semplici passaggi, garantendo a tutti la possibilità di dare un contributo sostanziale all’oceano Bada. Attraverso questo strumento la realizzazione di un app non richiederà che 15 minuti, permettendo, a realizzazione compiuta, la pubblicazione del proprio progetto direttamente sull’App Store.Bada App Builder non richiede altro all’utente che la selezione di: layout, contenuti e logo. Dopo questi semplici passaggi verrà consentita la pubblicazione della propria applicazione. Bada App Builder ed è compatibile con tutti i sistemi operativi di casa Microsoft e Linux. Permetterà di creare delle applicazioni dedicate proprio alla nuova relase del sistema operativo di Samsung. L’utilizzo è semplice, essendo un software punta e clicca e di conseguenza con le procedure guidate, si potrà creare il proprio software in meno di 20 minuti.Il gioco è fatto. Ovviamente si potrà anche inviare a Samsung per un controllo. Quindi, nuovi e vecchi developer, fatevi avanti per sbarcare su Samsung.
Tutt’ora Bada App Builder è in release scaricabile dal seguente link [DOWN]http://www.fileserve.com/file/777CNT2[/DOWN]
mentre la giuda è scaricabile da qui [DOWN]http://www.fileserve.com/file/vDkBdxm[/DOWN]
METODO 2:Codemotion Pensato da samsung per sviluppare Samsung Apps in modo semplice e rapido.
[DOWN]http://www.codemotion.it/samsung-bada-lab-invitation-adventure[/DOWN]
adfree said:
http://www.megaupload.com/?d=AIWU90NZ
http://www.megaupload.com/?d=TCG1ZBRE
This is a2 of 2.0 SDK...
Request.
Maybe someone can upload or Link to Alpha of bada 1.0 please.
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
Thank you man, so we can test our apps in some crazy ways.
Please, maybe someone could share old SDK and PlatformDownloader:
bada-SDK_1.0.0b2rc4.exe
bada-SDK_1.0.0b2_rc2_target.zip
PlatformDownloader_B8.exe
PlatformDownloader_B6_B7.exe
Thanx in advance.
http://static.bada.com/releasenotes/1.0.0b2.html
http://static.bada.com/releasenotes/1.0.0b2rc4.html
http://static.bada.com/releasenotes/1.0.0b2rc5.html
Best Regards
Oh... not realized that badaEmulator.exe can start alone...
Tools\Emulator\Bin
Code:
serial1 = yes
serial1.port = COM90
serial2 = yes
serial2.port = COM91
Maybe it is possible to work with WinComm or send Commands...
Best Regards
Lets try again...
I'm playing with SDK 2.0.3... yes I have latest... but...
Emulator first since SDK 2.0.0b1 known...
What we have:
FactoryFs_Emul_Wave.img --- not extractable easily yet...
apps.bin --- use HexEditor to look into...
Wave_Remaker can extract these files...
Thanx.
Code:
CSC_Emul_Wave.rcs.org
Rsrc2_Emul_Wave(Low).rc2
Rsrc_Emul_Wave.rc1.org
No idea if RC2 file accept Debug Level higher then Low... will try later...
Now "mainproblem"... how to inject files?
Best Regards
...Model\WaveWVGA\Emulator\Configuration
emulator.properties
This "text" affect also if you start only badaEmulator.exe
First change I did:
Code:
# supported scale factors are only 0.5, 0.75, and [B]1.0[/B]
window.scale=[B]1.0[/B]
Now full 480 x 800 Pixel...
Next I will play with this, for better position...
Code:
# emulator window position
Now I make new files with Wave Remaker... maybe faster start...
Remove Fonts etc...
Maybe I did something wrong but maybe TTF from CSC not used... so maybe 0 files possible...
CSC_Emul_Wave.rcs.org is 66 MB... now...
Lets see later...
Best Regards
I have removed complete TTF files from CSC...
I've lost German Umlaut, but Fonts are still visible...
So Windows Font or something else is used...
I have changed between English and German... can't see more missing stuff...
My CSC_Emul_Wave.rcs.org is now shrinked to 30 MB...
Code:
qemu_find_file failed! (x:\bada\2.0.3\Model/WaveWVGA/Emulator/[B]LSI.csi[/B])
[mount_image] Cannot find file (LSI.csi)
qemu_find_file failed! (x:\bada\2.0.3\Model/WaveWVGA/Emulator/Configuration/[B]aqua_log.conf[/B])
If I config
Code:
# yes - use IDE, send log message to IDE, add '-use-ide' option
# no - not use IDE, send log message to file(aqua_log.txt)
use.ide=[B]no[/B]
Then I have in Logs...
aqua_log.txt
Code:
0051.134,INFO,P32,T00,A121,OspMain (32) > Application started.
Not really amazing...
RC2 edit to Debug Level High... I can not see any difference...
Best Regards
Oh... it seems my RC2 Mod is working.
Cool, now also few more infos in aqua_log.txt
As it seems exact this from Blue Screen...
Best Regards
U O
FactoryFs_Emul_Wave.img
Here WRITE ... it is NOT ROM Image... read only...
With OLLYDBG.EXE I can find something... "in badaEmulator.exe"...
256 MB Block... but it seems not FAT so I am not smart enough to find solution for extract files from *.img.
But Algo must somewhere included as write access to this FactoryFs_Emul_Wave.img
Best Regards
Really funny...
You can play with SWF files, if you want...
Here I have only short tested ScreenLock.imswf from old XXJL2... bada 1...
Seems not compatible...
I have now 2 more ideas...
Will check if S8600 stuff... and or...
Best Regards
Edit 1.
Screenshot number 3... is taken from S8600
It is quick and dirty created but it is easy to replace some Pics...
No idea if Animated GIFs are possible... this is PNG...
Best Regards
Code:
# yes - enable aqua LOG
# no - disable aqua LOG, add '-no-log' option
Found this in 2.0.0b2... and..
com0com-setup.exe
So maybe I move back...
Best Regards
Connected to the bada IDE!
The "COM0" port did not open.
Click to expand...
Click to collapse
Small progress...
IDE open ... and Broker.exe...
Now second attempt...
With Event Injector you can make some folder/files visibe from FactoryFs_Emul_Wave.img
Best Regards
Second attempt...
No idea why, but Event Injector seems only started if IDE...
So I have closed IDE...
Broker.exe...
The "COM0" port did not open.
Click to expand...
Click to collapse
Found this in 2.0.0b2... and..
com0com-setup.exe
Click to expand...
Click to collapse
Hmmmmm. Maybe this file is the magic...
But I will better move to other PC.. to prevent absolute chaos with my Com Ports...
Best Regards
After I have realized, how to identify *.so files...
http://forum.xda-developers.com/showpost.php?p=25804534&postcount=24
First test was to modify few Bytes in FactoryFs_Emul_Wave.img, to see if Manipulation is fast detected...
I have manipulate MediaExplorer.so content.
Emulator starts normal... I can see all stuff.
Only if I click on my Files... Bluescreen.
Tested on 2.0.0b1
Attached is extracted file...
It is MediaExplorer.so, much shorter as in handset...
Best Regards
Investigate in Broker.exe
Broker.exe -h
Code:
Usage: broker
[-hgvd] [-i APP_ID] [-f APP_FOLDER] [-l APP_FILE] [-p <int>] [-r APPS_ROOT] [-
dbginfo-folder=DEBUG_INFO_FOLDER] [--painfo-folder=SM_INFO_FOLDER] [--gdi-only]
[--gsi-only] [--gmcr-only] [--ddm] [--dsm] [--dtm] [--dup] [--drf] [-s <int>] [
-connect-emul] [--gmon] [--del-res]
-h, --help Displays help on the command line parameters
-i, --app-id=APP_ID Inputs an application ID
-f, --app-folder=APP_FOLDER Inputs an application folder
-l, --app-file=APP_FILE Inputs an application binary file
-p, --port=<int> bada IDE socket port. ex) --port=6200
-g, --debug Debug mode
-r, --apps-root=APPS_ROOT Application root folder in a target.
default: "/Osp/Applications"
-v, --version Displays a version
--dbginfo-folder=DEBUG_INFO_FOLDER the local folder to get debug information
iles
--painfo-folder=SM_INFO_FOLDER the local folder to get performance analyzer i
formation files
--gdi-only Only Get Debug Information
--gsi-only Only Get SubMarine Information
--gmcr-only Only Get Memory Usage Checking Result
--ddm Disable to send/receive bada debug messages
--dsm Disable to send/receive submarine messages
--dtm Disable to relay bada trace messages
--dup Disable to upload
--drf Disable to remove application folder
-s, --pa-port=<int> Performance Analyzer socket port. ex) --pa-port=720
-d, --pa-debug Performance Analyzer Debug mode
--connect-emul Connect to Emulator
--gmon gmonitoring enable
--del-res Remove icons, resources, and data files on the targ
t.
Invalid command line argument!
Maybe I can use Broker to open Ports...
Best Regards
I have managed to install my own Apps...
Tested with 2.0.5 and Broker.exe from 2.0.0b1...
Still need IDE... and only with Win 7...
As XP block access to full folder...
Best Regards
static.bada.com/sdk-update/1.0.0b2rc4/Wave/Wave_1.0.0b2rc4.zip
static.bada.com/sdk-update/1.0.0b2rc5/Wave/Wave_1.0.0b2rc5.zip
Missing such files...
Code:
PlatformDownloader.exe
bada-SDK_1.0.0b1-RC1.zip
PlatformDownloader_B8.exe
PlatformDownloader_B6_B7.exe
bada-SDK_1.0.0b2_rc2_target.zip
bada_SDK_1.0.0b3_partner_packaged.zip
bada_SDK_1.0.0b3.exe
PlatformDownloader.exe
1.0.0b2_rc7
Maybe someone is able to find more valid Links... before bada complete dead...
Best Regards
http://dpimg.ospos.net/contents/dd/seoul/CertificationProcess.pdf
http://dpimg.ospos.net/contents/tutorials/bada-V1.0.0b2-rc4/badaTutorial.Security.pdf
http://dpimg.ospos.net/contents/tutorials/bada-V1.0.0b1/badaTutorial.Overview.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2/badaTutorial.Application.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2/badaTutorial.Communication.pdf
http://dpimg.ospos.net/contents/tutorials/bada_SDK_1.0.0/badaTutorial.UIExtension.pdf
http://dpimg.ospos.net/contents/tutorials/bada-V1.0.0b2-rc4/badaTutorial.DevelopmentEnvironment.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2_RC6.3/badaTutorial.sdkTarget.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2_RC6/badaTutorial.Media.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2_RC6/badaTutorial.sdkTarget.pdf
http://dpimg.ospos.net/contents/doc...ramework/classOsp_1_1Locales_1_1Currency.html
http://dpimg.ospos.net/contents/apis/bada/bada-V1.0.0a2/framework/classOsp_1_1Media_1_1Image.html
http://dpimg.ospos.net/contents/docs/apis/bada-V1.0.0b1/classOsp_1_1System_1_1SystemInfo.html
http://dpimg.ospos.net/contents/docs/apis/bada-V1.0.0b1/classOsp_1_1Ui_1_1Controls_1_1Keypad.html
http://dpimg.ospos.net/contents/en_US/developer/apis/images/contest/dd/B4-Game_in_bada.pdf
http://dpimg.ospos.net/contents/doc...sp.apireference.help/group__CplusplusSTL.html
View Links...
Best Regards
Installazione:
1-scaricare il file in fondo al post(STune 1.0.6 )
2-collegare il telefono in modalità usb collegare solo il pda senza archiviazione di massa ecc ecc..
3-aprire STune 1.0.6(funziona solo con questa versione del programma)
4-fate autoconnect
5-andate nella scheda browser
6- nella parte sinistra andate in AppEx->User->Theme-> e cliccate 2 volte sulla cartella Download
7- trascinate il file .smt nella colonna a destra
8- aspettate che finisca di caricarlo e poi scollegate il trelefono e andate in Impostazioni->Dispaly->Tema e selezionate il nuovo tema
tutto questo credo si faccia solo per la versione beta delle rom poi vedremo comunque e' semplicissimo
http://www.youtube.com/watch?v=Xm4zRXQ2tvo&feature=player_embedded
ci vuole piu' a dirsi che a farsi ciao a tutti
STune 1.0.6.rar
tutti i temi per 1.2 si possono tranquillamente installare ciao
http://translate.google.it/?hl=it
---------------------------------------------------------------
Trzebiat
It would be nice to write who invented this method.
I work out this method two months ago. With bada 2.0 themes.
Check here: mysamsungwave.com/index.php?topic=9998.0
A po polsku, tutaj: bit.ly/bada2Themes
And my instruction in English:
How to install the theme
1. Connect Your phone to the computer in KIES mode.
2. Run sTune 1.0.6.
3. Press "Auto Connect", then go to Browser tab.
4. In the left column (Folder) go to AppEx -> User -> Theme -> Download.
5. Drag and drop the theme file (Silver Stylish 2.0.smt) to the right column in Stune (Files).
6. After copying the file, close sTune and unplug Your phone.
7. Go to Settings -> Display -> Theme, select Silver Stylish 2.0 and press "Done".
8. Enjoy.
this is an english forum
please post in english so we can understand you
you can post italian also as optional for persons who talk italian like you
this is a forum rule so please follow it
Best Regards
顶顶更健康。。。呵呵
traslate italy
http://translate.google.it/?hl=it
Děláte si srandu? Toto je fórum, kde se má mluvit anglicky!
mylove90 said:
this is an english forum
please post in english so we can understand you
you can post italian also as optional for persons who talk italian like you
this is a forum rule so please follow it
Best Regards
Click to expand...
Click to collapse
I hate the English, if you do not know my language so much pleasure, mind your own business
baza14 said:
Děláte si srandu? Toto je fórum, kde se má mluvit anglicky!
Click to expand...
Click to collapse
Dobrze mówi! Polać mu.
It would be nice to write who invented this method.
I worked out this method two months ago. With bada 2.0 themes.
Check here: mysamsungwave.com/index.php?topic=9998.0
A po polsku, tutaj: bit.ly/bada2Themes
And my instruction in English:
How to install the theme
1. Connect Your phone to the computer in KIES mode.
2. Run sTune 1.0.6.
3. Press "Auto Connect", then go to Browser tab.
4. In the left column (Folder) go to AppEx -> User -> Theme -> Download.
5. Drag and drop the theme file (Silver Stylish 2.0.smt) to the right column in Stune (Files).
6. After copying the file, close sTune and unplug Your phone.
7. Go to Settings -> Display -> Theme, select Silver Stylish 2.0 and press "Done".
8. Enjoy.
DevilM said:
I hate the English, if you do not know my language so much pleasure, mind your own business
Click to expand...
Click to collapse
As i said it is forum rules
if it was for me i'd speak Arabic if i am free to
but no one will understand me and no one will care to translate
it is not a bad thing to put the english translation too and say sorry for bad english
if you did that then others will respect you
but posting in just italian will make others angry from you
also the moderator may close/delete your thread
it is about forum rules man
nothing personal
mylove90 said:
As i said it is forum rules
if it was for me i'd speak Arabic if i am free to
but no one will understand me and no one will care to translate
it is not a bad thing to put the english translation too and say sorry for bad english
if you did that then others will respect you
but posting in just italian will make others angry from you
also the moderator may close/delete your thread
it is about forum rules man
nothing personal
Click to expand...
Click to collapse
ah, ok ... thanks
DevilM said:
I hate the English, if you do not know my language so much pleasure, mind your own business
Click to expand...
Click to collapse
Actually, this is an English speaking forum, as specified in the forum rules.
If you HAVE to speak non English, you must provide an English translation in your post.