Hello all,
Okay, am definitely a noob, although have been able to root and make some major changes to my Desire with the help of this great forum since the last one year. Tried to look this up in the noob post and others, tried a lot of things folks suggested in other posts but not working.
Ran into a major problem this week when I tried to move to Leedroid's Gingerbread ROM using a brand new minisd I bought (Sandisk 8GB). Was running Leedroid's v2.5.0 earlier. Here are the steps I followed for the new card>
1. Backedup my stock MiniSD data (and formatted it)
2. Downloaded Easeus and partitioned my new MiniSD (using card reader) with first 7gigs of FAT32 and secondly with 500 MB of EXT3. (Cant seem to find an option for the swap)
3. Copied ROM and Radio into the new MiniSD
4. Booted into recovery through CWM v2.5.0.1 - wiped clean, tried to flash the ROM. Success message. Radio flash - Success message.
5. Reboot phone - stuck at HTC logo whitescreen!
Went into partitions menu on recovery and checked the mount, and I see this error:
E: Can't mount /dev/block/mmcblk0p2 (File exists)
Error mounting /sd-ext/!
I know this error can occur for a lot of reasons, but what I am more worried about is - did I just brick my desire? Am I just using an outdated CWM version? How do I upgrade now?
Thank you for any help..really appreciated.
SOLVED!
Upgraded CWM Recovery. Instead of EXT3, I re-formatted into EXT2, reloaded the ROM and Radio. Flashed!
Reboot successful.
well since it works already try with EXT3 or EXT4
they are faster than EXT2, you will see the diffrence
Related
Hi all, I am able to flash many roms from the devs section (rooted with Amon Ra recovery). However I have tried to flash 3 different HD roms from dev section and I always get the same error in recovery
"E:\Can't mount /dev/block/mmcblk0p2 (or /dev/block/mckblk0)
(No such device)
E:Can't mount SD EXT:
E:Failure at line 11 (or 7 depending on rom)
copy_dir PACKAGE:sdext SDEXT:
Installation aborted
The SD is partitioned using amon ra, also tried EXT3 and 4.
Anybody know how to fix this?
Ok, so you have 2 partitions on your SD card, first 1 is fat32 and second is ext4 at least 512mb?
i have two partitions but i don't know which is first or second. I use amonra recovery to create the partitions. I always use recovery to create the partitions for a2sd for other desire roms (non hd) and it always seems to work...
I think it is better to arrange the partitions using gparted, partition wizard, fdisk, etc.
I am using partition wizard and it works for HD ROMs (RCmixHD and rotating Z).
Hi...well this is kinda strange but me n my freind with same SD cards, same partition Fat32 and Ext2...he is able to flash all/any ROM but i cannot...i am currently using LeeDroid 2.3D and its working just fine....the only difference he is having HTC WWE ROM and i m having O2 UK ROM..please suggest/help
thanx in advance
I'm using BNZ 1.8C(a DHD ROM), i use recovery RA2.0.1 for partition my sdcard.With swap=0, EXT=1G, everything is ok, i also can flash ReflexTsense HD ROM. Hopes make a little help.
Hi all!
As a last resort i'll be asking my question here.
I'm currently running the stock 2.2 rom with root access and clockworkmod recovery. I've had this setup for a long time now. Today i got my 8gb class6 card and i thought i'd change to a Desire HD rom for a change.
So far (5 hours into the process), i've only managed to what seemed the easyest: ..partition my sd card!
I currently have the following:
7gb fat32
1gb ext2
32mb swap
I have tried everything i could find but i simply cannot get this thing to upgrade to ext3 and then ext4. I do not have a card reader at hand so i'll have to do it within the phone.
The problems i'm facing after struggling for 2 hours to get parted working:
- no upgrade_fs script.
- tune2fs giving a unknown command error
I've been playing arround with this for about an hour when i switched to trying to install AmonRA recovery as i read this could upgrade your ext partition aswell. Problems i faced when trying to flash this were:
- unrevoked: internal error, unable to unlock nand.
- flash recovery app: error running command.
- flash_image commands: whole bunch of write errors and in the end a no space left error.
- rom manager: alternate recovery's greyed out, even after countless reinstalls and 'flash clockworkmod first' -tricks.
- fastboot: remote: vertification error.
- terminal app: flash_image not found.
And probably a bunch more i forgot..
I'm thinking of simply installing a RUU and do the whole rooting process again, and then installing amonra. For now i've recovered a clockworkmod backup i made and put back my old sdcard.
I hope there's someone that can help me!
Kind regards,
Jeroen
Use something like gparted or Easus or what ever it's called to partition the SD card.
GoogleJelly said:
Use something like gparted or Easus or what ever it's called to partition the SD card.
Click to expand...
Click to collapse
Done this, but gparted only allows creation of ext2. The problem im having is upgrading it to ext3!
GParted allows to create all kind of EXT partition (including EXT3). Use the latest LIVE CD or USB version. I upgraded my EXT3 to 4 via GParted.
Sent from my customized HTC Desire using TTP
Oh i did not know that, i thought it only allowed up to ext2.
But dont you need a cardreader for that? Because i dont have one at hand right now
No, don't need a card reader. Best way is to boot into recovery and mount the SD Card. You can try via the Disk Drive option, but it gave me wrong readings (since the EXT partition was in use by the system), so not recommended.
Sent from my customized HTC Desire using TTP
Thank you!!!
I feel so stupid for struggling for hours yesterday. Only took me 5 minutes with GParted USB. Running the HD rom now!
I partitioned my SD with Amon Ra then selected ext2 to ext3, but it failed. When I moved the log to the SD card and read it on my PC it said there was no ext. I redid the partition, again with Amon Ra, then selected ext2 to ext3 and it worked. Just figured I'd let people know the ole try again method could work if you get here.
LostNomad311 said:
I partitioned my SD with Amon Ra then selected ext2 to ext3, but it failed. When I moved the log to the SD card and read it on my PC it said there was no ext. I redid the partition, again with Amon Ra, then selected ext2 to ext3 and it worked. Just figured I'd let people know the ole try again method could work if you get here.
Click to expand...
Click to collapse
In a couple of weeks, you will be posting about ext not working properly.
Only partition your sd-card with 4ext recovery or Gparted.
I flashed a Leedroid 3.0 and it was just stuck in the boot screen. So tried to clear data and all thru recovery and i got this error "can't mount /dev/block/mmcblk0p2 (File exists) error mounting /sd-ext/!.
I downloaded gparted to repartition my 8gb sd card. I did a ext3 partition. When i plug back the sd card, the error still comes out in recovery mode. Any rom i flash gets stuck in Bootscreen still. I tried partitioning my 4gb sd card but it also gave the same error in the recovery.
please help. Been trying the whole day and still nothing is happening
Have you tried partitioning it through recovery? (If you have that option available)
I'd begin with reflashing a cwm recovery, cause maybe the problem is not your sd. In "mounts and storage" did you try to mount/amount sd-ext ?
Sent from my Desire using LeeDrOiD 2.4.1
I cant also mount/unmount sd ext. It says the same thing. can't mount /dev/block/mmcblk0p2 (File exists) error mounting /sd-ext/!. should i just buy a fresh new memory card?
What exactly is your recovery ?
Sent from my Desire using LeeDrOiD 2.4.1
flash clockworkmod recovery 2.5.0.7 . Im using a sd card now without partition. It seems to work with the rom. Using Leedroid 2.4.1 . If i use the original SD card and reboot it with it, its just stuck in HTC boot screen.
So you should just use parted again with your stock sd to make it work ...
Sent from my Desire using LeeDrOiD 2.4.1
can't mount /dev/block/mmcblk0p2 (File exists) error mounting /sd-ext/
Click to expand...
Click to collapse
Common error when card is not partitioned or wrongly partitioned. First make Fat, then make EXT.
http://forum.xda-developers.com/showpost.php?p=7279872&postcount=3
Thanks man. I was able to repartition. I made a wrong partition in gparted. Made a fat32 primary then the second one extended partition. From your post i made it primary also the second one. Now my rom reads the sd card. Thanks again.
Hmmm I had this exact same problem with LeeDroid 3.0.2... Trying to flash without wiping, had about 80 apps on my EXT3 partition... Got stuck on the white HTC screen for about 2 hours, gave up, pulled the battery, tried to flash the alignment zip, still stuck... tried to restore nandroid backup but then started getting this same error as you.
Thankfully was able to rescue all files from my SD card, format and partition again, then flashed LeeDroid 3.0.2 and restored a Titanium backup... everything running smoothly again! Phew...
streetdaddy said:
[..]
Thankfully was able to rescue all files from my SD card, format and partition again, then flashed LeeDroid 3.0.2 and restored a Titanium backup... everything running smoothly again! Phew...
Click to expand...
Click to collapse
May I ask how did you manage to do that?
EDIT:
Ok. Apart from the backup/restore issues that depend on having a healthy ext partition as I figure, the "can't mount [..] error mounting /sd-ext/!" problem is responsible for the "green HTC logo on the white screen freeze" also. So I've been trying to make it work all evening and this is what I found:
The Error (at least in my case) and the freaking "green HTC logo" freezez were generated because the Ext partition got corrupted in some bizarre and mysterious way. I have no idea how that could have happened, but I guess a small role in this ballet got played by the ROM itself and maybe even the nandroid backup built into the CWM (ClockWorkMod). It started right after I finished installing a fresh copy of the LeeDroid 2.4.1 and all my favourite apps (which worked flawlessly), rebooted into bootloader > CWM > nandroid and made the full backup of the system. Rebooting the device afterwards got me into the above mentioned freeze.
I tried many things, among which were flashing different ROMs and Radio images (without wiping though), but none worked. I just wanted to roll back to the previous state (because i've spent quite some time configuring and installing the 2.4.1) and it seemed impossible at that point. Browsing the recovery options got me into the Mount and storage section where I noticed the listed error with the ext partition. I thought maybe formatting will help - well, it didn't. After a couple of weird things I had tried, I've decided I should delete the ext partition (leaving just the fat32 intact). Creating a new ext partition from scratch seemed to solve the error. However this didn't solve the freezing. And the reason had to be the fact that when it created the nandroid backup images, the ext was already corrupt (or however unreadable), so the relative image was not written because it didn't see the source.
I doubt there is any way to fully restore my previously installed ROM with all of it's apps in place and in a functioning order, because the ext partition had data on it and now it's missing (hence the freeze).
Therefore the question: what could have gone so badly wrong to compromise the ext partition?
And another one: is the LeeDroid 2.4.1 ROM or the 2.5.0.7 ClockworkMod Recovery the culprit?
Sorry for the looong post. I look further to hearing from Lee, if his busy schedule allows it and thank him in advance.
Cheers!
streetdaddy said:
Hmmm I had this exact same problem with LeeDroid 3.0.2... Trying to flash without wiping, had about 80 apps on my EXT3 partition... Got stuck on the white HTC screen for about 2 hours, gave up, pulled the battery, tried to flash the alignment zip, still stuck... tried to restore nandroid backup but then started getting this same error as you.
Thankfully was able to rescue all files from my SD card, format and partition again, then flashed LeeDroid 3.0.2 and restored a Titanium backup... everything running smoothly again! Phew...
Click to expand...
Click to collapse
hi! having the same exact problem right now... could you please help me how did you rescue all of your sd-card and sd-ext partitions? Thank you very much!
same problem on my N1, reparition to resolved
hi..
i got this problem too
i have clockworkmod recovery. pvt4.
cyanogenmod 7.1.
didn't make any partitions,
everything is by default as i got with cyanogenmod
s-on.
sd - 8gb, class2
yesterday my desire freezed.so i had to pull out the battery. but i couldn't turn it on till' i didn't wipe cache and dalvik cache.
When i selected wipe dalvik cache i got this
E: can't mount /dev/ block/mmcblk0p2
(file exists)
but it wiped it and my phone worked.
this appears even without sd card
it freezed after a week again but after a couple of reboots it works again but the error still exists.
i am newbie so i don't know what to do?
So I flashed a ROM which stuffed up my partitions somehow (also became S-ON, WTH?!).
I got 'can't open /dev/block/mmcblk0 (or /dev/block/mmcblk0p1) (invalid argument)' when trying to mount /sdcard.
I also got the aforementioned 'can't open /dev/block/mmcblk0p2 (file exists)' when trying to mount /sd-ext.
After literally 16 hours of head banging, I realised when I partitioned the SD card again that they were logical instead of primary. Partitioned using minitool partition wizard home edition.
Rundown:
I'm using LeeDroid v3.3.3 with clockworkmod recovery 2.5.0.7
Make sure you partition FAT32 first as primary, then ext3 as primary. LeeDroid says to partition ext3 1GB after FAT32, so e.g. my SD card is 16GB, I have ~13.8GB FAT32 | 1GB ext3
This fixed the 'can't mount /dev/block/mmcblk0' error, /sdcard is mountable.
You can now run .zip files from recovery (yay!). Throw alignment_ext3.zip on there and run it. You should now be able to mount /sd-ext.
Do a full wipe + Dalvik cache wipe (to test /sd-ext accessibility). For me it was back to normal and I'm currently doing a restore.
Always do a backup.
OK. So I need some serious help.
I have thrashed the web and found similar issues but the fixes there do not work for me.
Today I followed the instructions on the t-mod site (t-mod.org) to install T-Mod LeeDrOiD HD V3.3.3 Port R5 A2SD (Australian version of Leedroid). I had to apply the Telstra froyo RUU first to update my Hboot. The root process and s-off seemed to go fine. I installed the radio Radio_32.56.00.32U_5.17.05.08 and then T-mod.
On the first boot it went past the s-off ‘Why so serious’ screen and I thought I had it made but then the keep looping through the same boot animation screen. The last line reads “Detecting phone storage…”
I went back to recovery and found the CWM could not mount my sdcard.
CWM-AlphaRev Recovery v2.5.1.8
E:Can’t mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(no such file or directory)
Error mounting SDCARD:!
Since then I have tried a number of things.
- Tried to format card from CWM. Failed
- Tried to format card in Windows 7, which worked. But did not help.
- Tried a different sdcard. No difference.
- Tried to reapply the Telstra RUU. Successfully detected the device but would not complete.
- Hit the panic button.
Other people have reported similar issues with CWM not mounting the sdcard but this is generally fixed by either formatting the card or using a different card. The card in the phone was a brand new Lexar 16GB class 6 and then I tried the original 2GB Sandisk.
Please help.
See my replies here - http://forum.xda-developers.com/showthread.php?t=1176663
Wow. I look at that but not well enough. I thought it was for only when your pc would not detect your phone but it is so much more. thanks
It really is much easier than it looks. Just get Android Flasher from the link I provided in the other thread and run that command and that should re-enable your SD card on your phone.
This happened to my Desire once and I was stuck for hours, in the end found this to fix it, just plug your phone up via Fastboot and give this a go:
fastboot oem enableqxdm 0
Same thing happened to me just now. Fastboot says OKAY but still sd cant be mounted. Is there any other way? I used ADB, I'll also try Android Flasher.
EDIT : I formatted SD via CWM now it works
EDIT2 :Formerly I formatted with gparted in Linux, still wondering why it went wrong
please delete me
Hey Guys, i have the same problem. But i dont know what i should do with the Android Flasher ... Just go to /data an execute the files?? I have the Galaxy S2!
When i click on external_sd/ it says No files found. And how can you re flash the ROM, without having the sd card working. (because all the people say after re flashing it worked again:/)
Hi i am using my desire fir nearly 2 yrs and have flash many roms with all hboot. Now when i'm trying to flash a rom with either cm7 or cm7r2 hboot , the phone won't boot. I have fllow the instruction on this thread http://forum.xda-developers.com/showthread.php?t=1192984 but still the same. can anyone help me to sort it out.
Thanks in advance
What hboot you have now and what is the rom in question?
SwiftKeyed from my HTC Desire using XDA App.
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Yorba said:
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Click to expand...
Click to collapse
I guess you should partition your SD card: the most common is 1gb ext, rest is fat.
I already did that using gparted. 1gb ext4 and rest fat32
Set both partitions primary? Created first FAT and then EXT partition?
SwiftKeyed from dGB with Transparent XDA App
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
rajesh1108 said:
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
Click to expand...
Click to collapse
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
vidrom said:
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
Click to expand...
Click to collapse
OHHHHHH,
Finally looks like i'm all working.
I had to use my spare sd card to load Oxygen http://forum.xda-developers.com/showthread.php?t=971904
This enabled me to reformat my sd card (that was unrecognisable previously) on my phone - after rebooting the phone twice to recognise the card ( mounting and dismounting).
Card is now back to full capacity of 8GB. I've applied EXT4 1GB again, loaded Insertcoin and it's all GOOD!!!!
In terms of faulty EXT4 - performing fastboot oem enable qxdm 0 seemed to erase all the partitions and bring the card to factory state.
Hope some of you will find it useful.
Good luck to yall and MASSIVE thanks to those posting advice on this forum!!!
The case of vidrom is not the same as mine. see the first post it state clearly that i can't flash rom with cm7 or cm7r2 hboot. nothing to do with card can't recognise. I'm still searching for a solution.
Hey rajesh1108,
Have you tried flashing with Android Flasher ?
http://forum.xda-developers.com/showthread.php?t=794638
I found it to be the easiest way to getting around flashing.
I was once stuck with at boot load and basically redid everything from the beginning using a different guide. Try following this:
http://androidforums.com/desire-all...all-about-rooting-updated-21-july-2011-a.html
Sorry i cant be specific - i'm quite new to all this.
GOOD LUCK!
What rom are you trying to flash?
@vidrom:
Excuse me, but how should your post help the OP?
I solved my problem! Updated my recovery to a new version of Clockwork using ROM Manager.
i'm trying to flash runnymede 4.8.
Yorba which version of recovery are u using. how did u proceed. updated recovery and then flash hboot(cm7r2) and then flash your rom?
I would flash Hboot, recovery and then rom. Are you sure you wiped everything? Created an ext4 partition with at least 512 MB?
ya i have flash the same way you have mention and my ext 4 is 1gb